{
"NDC": [
{
"NDCCode": "58160-742-25",
"PackageDescription": "1 KIT in 1 CARTON (58160-742-25) * 10 VIAL in 1 CARTON (58160-753-19) / 2.5 mL in 1 VIAL (58160-753-01) * 10 VIAL in 1 CARTON (58160-855-19) / 2.5 mL in 1 VIAL (58160-855-01) ",
"NDC11Code": "58160-0742-25",
"ProductNDC": "58160-742",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Arepanrix",
"NonProprietaryName": "Influenza A H5 Monovalent Vaccine",
"DosageFormName": "KIT",
"StartMarketingDate": "20260511",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125419",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260511",
"SamplePackage": "N",
"IndicationAndUsage": "AREPANRIX is indicated for active immunization for the prevention of disease caused by the influenza A virus H5 subtype contained in the vaccine. AREPANRIX is approved for use in individuals 6 months of age and older at increased risk of exposure to the influenza A virus H5 subtype contained in the vaccine. In individuals 6 months through 17 years of age, this indication is approved under accelerated approval based on immune responses, as measured by hemagglutination‑inhibition (HI) titers [see Clinical Studies (14.2)]. Continued approval for this indication in individuals 6 months through 17 years of age may be contingent upon verification and description of clinical benefit in a confirmatory trial.",
"Description": "AREPANRIX (Influenza A [H5] Monovalent Vaccine, Adjuvanted) is a sterile injectable emulsion administered intramuscularly. The vaccine is supplied as 2 components: a vial of inactivated, split-virion, H5 Antigen Component and a vial of AS03 Adjuvant Component that must be combined prior to administration to form AREPANRIX. The H5 Antigen Component is manufactured according to a similar process as that used to produce the antigens contained in FLULAVAL (Influenza Vaccine) and FLULAVAL QUADRIVALENT (Influenza Vaccine), which are unadjuvanted seasonal influenza vaccines licensed in the U.S. The H5 Antigen Component is a sterile, translucent to whitish opalescent suspension in a phosphate-buffered, thimerosal‑containing saline solution that may sediment slightly. The sediment resuspends upon mixing by inversion to form a homogeneous suspension. The H5 Antigen Component is prepared from virus propagated in the allantoic cavity of embryonated hen’s eggs. The virus is inactivated with ultraviolet light treatment followed by formaldehyde treatment, purified by centrifugation, and disrupted with sodium deoxycholate. The AS03 Adjuvant Component is a homogenized, sterile, whitish to yellowish milky emulsion composed of squalene, DL-α-tocopherol, and polysorbate 80. AREPANRIX is prepared by combining the H5 Antigen Component with the AS03 Adjuvant Component. After combining, AREPANRIX is a whitish to yellowish homogenous milky emulsion. Each 0.5‑mL dose of AREPANRIX (H5N8) for individuals 18 years of age and older contains 3.75 mcg hemagglutinin (HA) of the influenza virus strain A/Astrakhan/3212/2020-like (H5N8, clade 2.3.4.4b); 5 mcg thimerosal, a mercury derivative, as a preservative (2.5 mcg mercury); and AS03 adjuvant (10.69 mg squalene, 11.86 mg DL-α-tocopherol, and 4.86 mg polysorbate 80). Each 0.5-mL dose may also contain residual amounts of ovalbumin (≤0.083 mcg), formaldehyde (≤12.5 mcg), and sodium deoxycholate (≤3.75 mcg) from the manufacturing process. Each 0.25‑mL dose of AREPANRIX (H5N8) for individuals 6 months through 17 years contains 1.9 mcg hemagglutinin (HA) of the influenza virus strain A/Astrakhan/3212/2020-like (H5N8, clade 2.3.4.4b); 2.5 mcg thimerosal, a mercury derivative, as a preservative (1.25 mcg mercury); and AS03 adjuvant (5.35 mg squalene, 5.93 mg DL-α-tocopherol, and 2.43 mg polysorbate 80). Each 0.25‑mL dose may also contain residual amounts of ovalbumin (≤0.042 mcg), formaldehyde (≤6.25 mcg), and sodium deoxycholate (≤1.88 mcg) from the manufacturing process. The vial stoppers are not made with natural rubber latex."
},
{
"NDCCode": "70997-742-25",
"PackageDescription": "25 kg in 1 DRUM (70997-742-25)",
"NDC11Code": "70997-0742-25",
"ProductNDC": "70997-742",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Guaifenesin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20160930",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Lactose (India) Limited",
"SubstanceName": "GUAIFENESIN",
"StrengthNumber": ".955",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "76420-742-01",
"PackageDescription": "1 KIT in 1 CARTON (76420-742-01) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-165-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * .9 mL in 1 PACKET (67777-419-02) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) ",
"NDC11Code": "76420-0742-01",
"ProductNDC": "76420-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mlk Kit F2",
"NonProprietaryName": "Marcaine, Lidocaine, Kenalog, Povidone Iodine",
"DosageFormName": "KIT",
"RouteName": "EPIDURAL; INFILTRATION; INTRA-ARTICULAR; INTRAMUSCULAR; TOPICAL",
"StartMarketingDate": "20180510",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Asclemed USA, Inc.",
"Status": "Active",
"LastUpdate": "2026-01-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180510",
"SamplePackage": "N"
},
{
"NDCCode": "58160-757-15",
"PackageDescription": "1 KIT in 1 CARTON (58160-757-15) * .5 mL in 1 VIAL (58160-730-03) * .5 mL in 1 SYRINGE (58160-750-03) ",
"NDC11Code": "58160-0757-15",
"ProductNDC": "58160-757",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Penmenvy",
"NonProprietaryName": "Meningococcal (groups A, B, C, W And Y)",
"DosageFormName": "KIT",
"StartMarketingDate": "20250214",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125819",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250214",
"SamplePackage": "N",
"IndicationAndUsage": "PENMENVY is a vaccine indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y in individuals 10 through 25 years of age.",
"Description": "PENMENVY (Meningococcal Groups A, B, C, W, and Y Vaccine) is a sterile injectable suspension for intramuscular use. The vaccine is supplied as one vial of Lyophilized MenACWY Component which is reconstituted at the time of use with the accompanying prefilled syringe of MenB Component. The Lyophilized MenACWY Component contains N. meningitidis serogroups A, C, W, and Y oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis serogroups A, C, W, or Y. N. meningitidis serogroup A, C, W, and Y strains are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW, and MenY polysaccharides are purified by several steps, including extraction, filtration, and precipitation. MenC polysaccharide is purified by a combination of extraction, chromatography, and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. The C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from the purified polysaccharides which are processed by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the four drug substances, which are formulated with sucrose and phosphate and lyophilized to form the Lyophilized MenACWY Component. The Lyophilized MenACWY Component is a white to off‑white lyophilized cake. The MenB Component contains recombinant N. meningitidis proteins Neisseria adhesin A (NadA), Neisserial Heparin Binding Antigen (NHBA), and factor H binding protein (fHbp), and Outer Membrane Vesicles (OMV). The NadA component is a fragment of the full‑length protein derived from N. meningitidis strain 2996 (peptide 8 variant 2/3).2 The NHBA component is a recombinant fusion protein comprised of NHBA (peptide 2)2 and accessory protein 953 derived from N. meningitidis strains NZ98/254 and 2996, respectively. The fHbp component is a recombinant fusion protein comprised of fHbp (variant 1.1)2 and the accessory protein 936 derived from N. meningitidis strains MC58 and 2996, respectively. These 3 recombinant proteins are individually produced in Escherichia coli and purified through a series of column chromatography steps. The OMV antigenic component is produced by fermentation of N. meningitidis strain NZ98/254 (expressing outer membrane protein Porin A [PorA] serosubtype P1.4),3 followed by inactivation of the bacteria by deoxycholate, which also mediates vesicle formation. The antigens are adsorbed onto aluminum hydroxide. The MenB Component is a white opalescent suspension. After reconstitution, each approximately 0.5‑mL dose contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenW, and MenY oligosaccharides; 25.9 to 64.1 mcg CRM197 protein; 50 mcg each of recombinant proteins NadA, NHBA, and fHbp; and 25 mcg of OMV. Each dose also contains 1.5 mg aluminum hydroxide (0.5 mg of Al3+), 3.125 mg sodium chloride, 0.776 mg histidine, 22.5 mg sucrose, and ≤0.7 mg potassium phosphate salts. Each dose contains less than 0.01 mcg kanamycin (by calculation). Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. After reconstitution, PENMENVY is a white opalescent suspension. The tip cap and rubber plunger of the prefilled syringe and the stopper of the vial are not made with natural rubber latex. PENMENVY does not contain preservatives."
},
{
"NDCCode": "58160-810-11",
"PackageDescription": "10 VIAL in 1 CARTON (58160-810-11) > .5 mL in 1 VIAL (58160-810-01) ",
"NDC11Code": "58160-0810-11",
"ProductNDC": "58160-810",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Infanrix",
"NonProprietaryName": "Diphtheria And Tetanus Toxoids And Acellular Pertussis Vaccine Adsorbed",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20090724",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103647",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "25; 8; 25; 10; 25",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-12-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20090724",
"SamplePackage": "N"
},
{
"NDCCode": "58160-810-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-810-52) / .5 mL in 1 SYRINGE (58160-810-43) ",
"NDC11Code": "58160-0810-52",
"ProductNDC": "58160-810",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Infanrix",
"NonProprietaryName": "Diphtheria And Tetanus Toxoids And Acellular Pertussis Vaccine Adsorbed",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20090724",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103647",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "10; 25; 25; 25; 8",
"StrengthUnit": "[iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090724",
"SamplePackage": "N",
"IndicationAndUsage": "INFANRIX is indicated for active immunization against diphtheria, tetanus, and pertussis as a 5-dose series in infants and children aged 6 weeks through 6 years (prior to the seventh birthday).",
"Description": "INFANRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Vaccine Adsorbed) is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), and 8 mcg of pertactin (69 kiloDalton outer membrane protein). The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor present an undue risk for bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. Diphtheria and tetanus toxoids and pertussis antigens (PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis components (PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. Each 0.5 mL dose contains aluminum hydroxide as adjuvant (formulated to contain 0.5 mg aluminum) and 4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. INFANRIX is formulated without preservatives."
},
{
"NDCCode": "58160-811-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-811-52) / .5 mL in 1 SYRINGE (58160-811-43) ",
"NDC11Code": "58160-0811-52",
"ProductNDC": "58160-811",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Pediarix",
"NonProprietaryName": "Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed, Hepatitis B (recombinant) And Inactivated Poliovirus Vaccine Combined",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20090724",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103907",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); HEPATITIS B VIRUS SUBTYPE ADW2 HBSAG SURFACE PROTEIN ANTIGEN; POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "25; 10; 25; 25; 8; 10; 40; 8; 32",
"StrengthUnit": "[iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090724",
"SamplePackage": "N",
"IndicationAndUsage": "PEDIARIX is indicated for active immunization against diphtheria, tetanus, pertussis, infection caused by all known subtypes of hepatitis B virus, and poliomyelitis. PEDIARIX is approved for use as a 3-dose series in infants born of hepatitis B surface antigen (HBsAg)-negative mothers. PEDIARIX may be given as early as 6 weeks of age through 6 years of age (prior to the seventh birthday).",
"Description": "PEDIARIX [Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed, Hepatitis B (Recombinant) and Inactivated Poliovirus Vaccine] is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), 8 mcg of pertactin (69 kiloDalton outer membrane protein), 10 mcg of HBsAg, 40 D-antigen Units (DU) of Type 1 poliovirus (Mahoney), 8 DU of Type 2 poliovirus (MEF-1), and 32 DU of Type 3 poliovirus (Saukett). The diphtheria, tetanus, and pertussis components are the same as those in INFANRIX and KINRIX. The hepatitis B surface antigen is the same as that in ENGERIX-B. The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor present an undue risk for bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. The hepatitis B surface antigen is obtained by culturing genetically engineered Saccharomyces cerevisiae (S. cerevisiae) cells, which carry the surface antigen gene of the hepatitis B virus, in synthetic medium. The surface antigen expressed in the S. cerevisiae cells is purified by several physiochemical steps, which include precipitation, ion exchange chromatography, and ultrafiltration. The inactivated poliovirus component is an enhanced potency component. Each of the 3 strains of poliovirus is individually grown in VERO cells, a continuous line of monkey kidney cells, cultivated on microcarriers. Calf serum and lactalbumin hydrolysate are used during VERO cell culture and/or virus culture. Calf serum is sourced from countries the USDA has determined neither have nor present an undue risk for BSE. After clarification, each viral suspension is purified by ultrafiltration, diafiltration, and successive chromatographic steps, and inactivated with formaldehyde. The 3 purified viral strains are then pooled to form a trivalent concentrate. Diphtheria and tetanus toxoids and pertussis antigens (inactivated PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. The hepatitis B component is adsorbed onto aluminum phosphate. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis component (inactivated PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. Potency of the hepatitis B component is established by HBsAg ELISA. The potency of the inactivated poliovirus component is determined by using the D-antigen ELISA and by a poliovirus-neutralizing cell culture assay on sera from previously immunized rats. Each 0.5 mL dose contains aluminum hydroxide and aluminum phosphate as adjuvants (formulated to contain 0.7 mg aluminum) and ≤4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). Neomycin sulfate and polymyxin B sulfate are used in the poliovirus vaccine manufacturing process and may be present in the final vaccine at ≤0.05 ng neomycin and ≤0.01 ng polymyxin B per dose. The procedures used to manufacture the HBsAg antigen result in a product that contains ≤5% yeast protein. The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. PEDIARIX is formulated without preservatives."
},
{
"NDCCode": "58160-812-11",
"PackageDescription": "10 VIAL in 1 CARTON (58160-812-11) > .5 mL in 1 VIAL (58160-812-01) ",
"NDC11Code": "58160-0812-11",
"ProductNDC": "58160-812",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Kinrix",
"NonProprietaryName": "Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed And Inactivated Poliovirus Vaccine",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20080709",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125260",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "25; 8; 25; 10; 25; 40; 8; 32",
"StrengthUnit": "[iU]/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20080709",
"SamplePackage": "N"
},
{
"NDCCode": "58160-812-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-812-52) / .5 mL in 1 SYRINGE (58160-812-43) ",
"NDC11Code": "58160-0812-52",
"ProductNDC": "58160-812",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Kinrix",
"NonProprietaryName": "Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed And Inactivated Poliovirus Vaccine",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20080709",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125260",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "25; 10; 25; 8; 25; 40; 8; 32",
"StrengthUnit": "[iU]/.5mL; [iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-05-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20080709",
"SamplePackage": "N",
"IndicationAndUsage": "A single dose of KINRIX is indicated for active immunization against diphtheria, tetanus, pertussis, and poliomyelitis as the fifth dose in the diphtheria, tetanus, and acellular pertussis (DTaP) vaccine series and the fourth dose in the inactivated poliovirus vaccine (IPV) series in children aged 4 through 6 years (prior to the seventh birthday) whose previous DTaP vaccine doses have been with INFANRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Vaccine Adsorbed) and/or PEDIARIX [Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed, Hepatitis B (Recombinant) and Inactivated Poliovirus Vaccine] for the first 3 doses and INFANRIX for the fourth dose.",
"Description": "KINRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed and Inactivated Poliovirus Vaccine) is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), 8 mcg of pertactin (69 kiloDalton outer membrane protein), 40 D‑antigen Units (DU) of Type 1 poliovirus (Mahoney), 8 DU of Type 2 poliovirus (MEF‑1), and 32 DU of Type 3 poliovirus (Saukett). The diphtheria, tetanus, and pertussis components of KINRIX are the same as those in INFANRIX and PEDIARIX and the poliovirus component is the same as that in PEDIARIX. The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor are at risk of bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. Diphtheria and tetanus toxoids and pertussis antigens (inactivated PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. The inactivated poliovirus component of KINRIX is an enhanced potency component. Each of the 3 strains of poliovirus is individually grown in VERO cells, a continuous line of monkey kidney cells, cultivated on microcarriers. Calf serum and lactalbumin hydrolysate are used during VERO cell culture and/or virus culture. Calf serum is sourced from countries the USDA has determined neither have nor are at risk of BSE. After clarification, each viral suspension is purified by ultrafiltration, diafiltration, and successive chromatographic steps, and inactivated with formaldehyde. The 3 purified viral strains are then pooled to form a trivalent concentrate. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis components (inactivated PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. The potency of the inactivated poliovirus component is determined by using the D-antigen ELISA and by a poliovirus-neutralizing cell culture assay on sera from previously immunized rats. Each 0.5 mL dose contains aluminum hydroxide as adjuvant (formulated to contain 0.5 mg aluminum) and ≤4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). Neomycin sulfate and polymyxin B sulfate are used in the poliovirus vaccine manufacturing process and may be present in the final vaccine at ≤0.05 ng neomycin and ≤0.01 ng polymyxin B per dose. The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. KINRIX does not contain a preservative."
},
{
"NDCCode": "58160-819-12",
"PackageDescription": "1 KIT in 1 CARTON (58160-819-12) * .5 mL in 1 VIAL (58160-828-01) * .5 mL in 1 VIAL (58160-829-01) ",
"NDC11Code": "58160-0819-12",
"ProductNDC": "58160-819",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Shingrix",
"NonProprietaryName": "Zoster Vaccine Recombinant, Adjuvanted",
"DosageFormName": "KIT",
"StartMarketingDate": "20171020",
"EndMarketingDate": "20250823",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125614",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Deprecated",
"LastUpdate": "2025-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20171020",
"EndMarketingDatePackage": "20250823",
"SamplePackage": "N",
"IndicationAndUsage": "SHINGRIX is a vaccine indicated for prevention of herpes zoster (HZ) (shingles): 1 in adults aged 50 years and older., 2 in adults aged 18 years and older who are or will be at increased risk of HZ due to immunodeficiency or immunosuppression caused by known disease or therapy.",
"Description": "SHINGRIX (Zoster Vaccine Recombinant, Adjuvanted) is a sterile injectable suspension for intramuscular use that contains recombinant varicella zoster virus gE antigen adjuvanted with AS01B. The vial and vial presentation is supplied as a vial of lyophilized recombinant varicella zoster virus surface gE antigen component (Lyophilized gE Antigen Component), which must be reconstituted at the time of use with the accompanying vial of AS01B (Adjuvant Suspension Component) to form SHINGRIX. The SHINGRIX prefilled syringe presentation does not require reconstitution. SHINGRIX is a sterile, opalescent, colorless to pale brownish liquid. The gE antigen is obtained by culturing genetically engineered Chinese Hamster Ovary cells, which carry a truncated gE gene, in media containing amino acids, with no albumin, antibiotics, or animal‑derived proteins. The gE protein is purified by several chromatographic steps and formulated with excipients. The AS01B adjuvant is composed of 3‑O‑desacyl‑4’‑monophosphoryl lipid A (MPL) derived from Salmonella minnesota and QS‑21, a saponin purified from Quillaja saponaria Molina plant extract, and is combined in a liposomal formulation. The liposomes are composed of dioleoyl phosphatidylcholine (DOPC) and cholesterol in phosphate‑buffered saline solution containing disodium phosphate anhydrous, potassium dihydrogen phosphate, sodium chloride, and water for injection. Each 0.5‑mL dose is formulated to contain 50 mcg of the recombinant gE antigen, 50 mcg of MPL, and 50 mcg of QS‑21. Each dose also contains 20 mg of sucrose, 4.385 mg of sodium chloride, 1 mg of DOPC, 0.54 mg of potassium dihydrogen phosphate, 0.25 mg of cholesterol, 0.160 mg of sodium dihydrogen phosphate dihydrate, 0.15 mg of disodium phosphate anhydrous, 0.116 mg of dipotassium phosphate, and 0.08 mg of polysorbate 80. SHINGRIX does not contain preservatives. Each dose may also contain residual amounts of host cell proteins (≤3.0%) and DNA (≤2.1 picograms) from the manufacturing process. In the vial and vial presentation, the vial stoppers are not made with natural rubber latex. In the prefilled syringe presentation, the tip cap and rubber plunger stopper are not made with natural rubber latex."
},
{
"NDCCode": "58160-827-30",
"PackageDescription": "10 VIAL in 1 CARTON (58160-827-30) / .5 mL in 1 VIAL (58160-827-03) ",
"NDC11Code": "58160-0827-30",
"ProductNDC": "58160-827",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Menveo",
"NonProprietaryName": "Meningococcal (groups A, C, Y And W-135) Oligosaccharide Diphtheria Crm197 Conjugate Vaccine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20221209",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125300",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "NEISSERIA MENINGITIDIS GROUP A CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP C CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP W-135 CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP Y CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN",
"StrengthNumber": "10; 5; 5; 5",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Pharm_Classes": "Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221209",
"SamplePackage": "N",
"IndicationAndUsage": "MENVEO is a vaccine indicated for active immunization to prevent invasive meningococcal disease caused by Neisseria meningitidis serogroups A, C, Y, and W-135 in individuals 2 months through 55 years of age. MENVEO does not prevent N. meningitidis serogroup B infections.",
"Description": "MENVEO [Meningococcal (Groups A, C, Y, and W-135) Oligosaccharide Diphtheria CRM197 Conjugate Vaccine] is a sterile liquid vaccine administered by intramuscular injection that contains N. meningitidis serogroup A, C, Y, and W-135 oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis (serogroups A, C, Y, or W-135). N. meningitidis strains A, C, Y, and W-135 are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW-135, and MenY polysaccharides are purified by several extraction and precipitation steps. MenC polysaccharide is purified by a combination of chromatography and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from purified polysaccharides by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the 4 drug substances, which compose the final vaccine. The vaccine contains no preservative or adjuvant. Each dose of vaccine contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenY, and MenW-135 oligosaccharides; and 25.9 to 64.1 mcg CRM197 protein. Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. The vials in which the vaccine components are contained are composed of Type I glass, USP. The container closures (synthetic rubber stoppers) are not made with natural rubber latex."
},
{
"NDCCode": "58160-854-52",
"PackageDescription": "1 KIT in 1 CARTON (58160-854-52) * 10 VIAL in 1 CARTON (58160-851-10) / 1 mL in 1 VIAL (58160-851-01) * 1 mL in 1 APPLICATOR (58160-853-02) ",
"NDC11Code": "58160-0854-52",
"ProductNDC": "58160-854",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Rotarix",
"NonProprietaryName": "Rotavirus Vaccine, Live, Oral",
"DosageFormName": "KIT",
"StartMarketingDate": "20110113",
"EndMarketingDate": "20250224",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125265",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Deprecated",
"LastUpdate": "2025-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110113",
"EndMarketingDatePackage": "20250224",
"SamplePackage": "N",
"IndicationAndUsage": "ROTARIX is indicated for the prevention of rotavirus gastroenteritis caused by G1 and non-G1 types (G3, G4, and G9) when administered as a 2-dose series [see Clinical Studies (14.3)]. ROTARIX is approved for use in infants 6 weeks and up to 24 weeks of age.",
"Description": "ROTARIX (Rotavirus Vaccine, Live, Oral), for oral administration, is a live, attenuated rotavirus vaccine derived from the human 89-12 strain which belongs to G1P[8] type. The rotavirus vaccine strain is propagated on Vero cells. There are two formulations of ROTARIX: a reconstituted lyophilized formulation (supplied in a vial and oral dosing applicator presentation) and a liquid formulation (supplied in an oral dosing applicator only presentation). Formulation for the Vial and Oral Dosing Applicator Presentation. After reconstitution of the lyophilized vaccine component, each 1 mL dose of the ROTARIX formulation for the vial and oral dosing applicator presentation contains at least 106.0 median Cell Culture Infective Dose (CCID50) of live, attenuated rotavirus. The lyophilized vaccine component of this ROTARIX formulation contains amino acids, dextran, Dulbecco’s Modified Eagle Medium (DMEM), sorbitol, and sucrose. DMEM contains the following ingredients: sodium chloride, potassium chloride, magnesium sulfate, ferric (III) nitrate, sodium dihydrogen phosphate, sodium pyruvate, D-glucose, concentrated vitamin solution, L-cystine, L-tyrosine, amino acids solution, L-glutamine, calcium chloride, and sodium hydrogenocarbonate. In the manufacturing process, porcine-derived materials are used. Porcine circovirus type 1 (PCV-1) is present in this ROTARIX formulation. PCV-1 is not known to cause disease in humans. The liquid diluent contains calcium carbonate, sterile water, and xanthan. The diluent includes an antacid component (calcium carbonate) to protect the vaccine during passage through the stomach and prevent its inactivation due to the acidic environment of the stomach. This ROTARIX formulation is available in single-dose vials of lyophilized vaccine, accompanied by a prefilled oral dosing applicator of liquid diluent [see How Supplied/Storage and Handling (16)]. The tip caps of the prefilled oral dosing applicators contain natural rubber latex; the vial stoppers are not made with natural rubber latex. This ROTARIX formulation contains no preservatives. Formulation for the Oral Dosing Applicator Only Presentation. Each 1.5 mL dose of the ROTARIX formulation for the oral dosing applicator only presentation contains at least 106.0 CCID50 of live, attenuated rotavirus. This ROTARIX formulation contains disodium adipate, Dulbecco’s Modified Eagle Medium (DMEM), sucrose, and sterile water. DMEM contains the following ingredients: sodium chloride, potassium chloride, magnesium sulfate, ferric (III) nitrate, sodium dihydrogen phosphate, sodium pyruvate, D-glucose, concentrated vitamin solution, L-cystine, L-tyrosine, amino acids solution, L-glutamine, calcium chloride, and sodium hydrogenocarbonate. This ROTARIX formulation contains an antacid component (disodium adipate) to protect the vaccine during passage through the stomach and prevent its inactivation due to the acidic environment of the stomach. This ROTARIX formulation is available in single-dose prefilled oral dosing applicator [see How Supplied/Storage and Handling (16)]. The tip caps of the prefilled oral dosing applicators contain natural rubber latex. This ROTARIX formulation contains no preservatives."
},
{
"NDCCode": "58160-905-52",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-905-52) > .5 mL in 1 SYRINGE (58160-905-41)",
"NDC11Code": "58160-0905-52",
"ProductNDC": "58160-905",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Fluarix Quadrivalent",
"ProprietaryNameSuffix": "2016/2017",
"NonProprietaryName": "Influenza Virus Vaccine",
"DosageFormName": "SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20160701",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125127",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "INFLUENZA A VIRUS A/CHRISTCHURCH/16/2010 NIB-74XP (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/HONG KONG/4801/2014 X-263B (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/BRISBANE/60/2008 ANTIGEN (FORMALDEHYDE INACTIVATED)",
"StrengthNumber": "15; 15; 15; 15",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2017-07-25"
},
{
"NDCCode": "58160-955-09",
"PackageDescription": "1 KIT in 1 CARTON (58160-955-09) * .5 mL in 1 VIAL, SINGLE-DOSE (58160-958-01) * .5 mL in 1 VIAL, SINGLE-DOSE (58160-959-01) ",
"NDC11Code": "58160-0955-09",
"ProductNDC": "58160-955",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Menveo",
"NonProprietaryName": "Meningococcal (groups A, C, Y And W-135) Oligosaccharide Diphtheria Crm197 Conjugate Vaccine",
"DosageFormName": "KIT",
"StartMarketingDate": "20170301",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125300",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"Status": "Active",
"LastUpdate": "2026-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170301",
"SamplePackage": "N",
"IndicationAndUsage": "MENVEO is a vaccine indicated for active immunization to prevent invasive meningococcal disease caused by Neisseria meningitidis serogroups A, C, Y, and W-135 in individuals 2 months through 55 years of age. MENVEO does not prevent N. meningitidis serogroup B infections.",
"Description": "MENVEO [Meningococcal (Groups A, C, Y, and W-135) Oligosaccharide Diphtheria CRM197 Conjugate Vaccine] is a sterile liquid vaccine administered by intramuscular injection that contains N. meningitidis serogroup A, C, Y, and W-135 oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis (serogroups A, C, Y, or W-135). N. meningitidis strains A, C, Y, and W-135 are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW-135, and MenY polysaccharides are purified by several extraction and precipitation steps. MenC polysaccharide is purified by a combination of chromatography and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from purified polysaccharides by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the 4 drug substances, which compose the final vaccine. The vaccine contains no preservative or adjuvant. Each dose of vaccine contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenY, and MenW-135 oligosaccharides; and 25.9 to 64.1 mcg CRM197 protein. Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. The vials in which the vaccine components are contained are composed of Type I glass, USP. The container closures (synthetic rubber stoppers) are not made with natural rubber latex."
},
{
"NDCCode": "58160-976-06",
"PackageDescription": "1 SYRINGE in 1 CARTON (58160-976-06) > .5 mL in 1 SYRINGE (58160-976-02) ",
"NDC11Code": "58160-0976-06",
"ProductNDC": "58160-976",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Bexsero",
"NonProprietaryName": "Neisseria Meningitidis Serogroup B Nhba Fusion Protein Antigen, Neisseria Meningitidis Serogroup B Fhbp Fusion Protein Antigen And Neisseria Meningitidis Serogroup B Nada Protein Antigen",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125546",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "NEISSERIA MENINGITIDIS GROUP B NHBA FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B FHBP FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B NADA PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B STRAIN NZ98/254 OUTER MEMBRANE VESICLE",
"StrengthNumber": "50; 50; 50; 25",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N"
},
{
"NDCCode": "58160-976-20",
"PackageDescription": "10 SYRINGE in 1 CARTON (58160-976-20) / .5 mL in 1 SYRINGE (58160-976-02) ",
"NDC11Code": "58160-0976-20",
"ProductNDC": "58160-976",
"ProductTypeName": "VACCINE",
"ProprietaryName": "Bexsero",
"NonProprietaryName": "Neisseria Meningitidis Serogroup B Nhba Fusion Protein Antigen, Neisseria Meningitidis Serogroup B Fhbp Fusion Protein Antigen And Neisseria Meningitidis Serogroup B Nada Protein Antigen",
"DosageFormName": "INJECTION, SUSPENSION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125546",
"LabelerName": "GlaxoSmithKline Biologicals SA",
"SubstanceName": "NEISSERIA MENINGITIDIS GROUP B NHBA FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B FHBP FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B NADA PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B STRAIN NZ98/254 OUTER MEMBRANE VESICLE ANTIGEN",
"StrengthNumber": "50; 50; 50; 25",
"StrengthUnit": "ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL",
"Status": "Active",
"LastUpdate": "2025-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "BEXSERO is a vaccine indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroup B. BEXSERO is approved for use in individuals aged 10 through 25 years.",
"Description": "BEXSERO (Meningococcal Group B Vaccine) is a sterile, white, opalescent, injectable suspension for intramuscular use. Each 0.5-mL dose of BEXSERO is formulated to contain 50 mcg each of recombinant proteins Neisserial adhesin A (NadA), Neisserial Heparin Binding Antigen (NHBA), and factor H binding protein (fHbp), and 25 mcg of Outer Membrane Vesicles (OMV), 1.5 mg aluminum hydroxide (0.519 mg of Al3+), 3.125 mg sodium chloride, 0.776 mg histidine, and 10 mg sucrose at pH 6.4 to 6.7. The NadA component is a fragment of the full-length protein derived from N. meningitidis strain 2996 (peptide 8 variant 2/3)1. The NHBA component is a recombinant fusion protein comprised of NHBA (peptide 2)1 and accessory protein 953 derived from N. meningitidis strains NZ98/254 and 2996, respectively. The fHbp component is a recombinant fusion protein comprised of fHbp (variant 1.1)1 and the accessory protein 936 derived from N. meningitidis strains MC58 and 2996, respectively. These 3 recombinant proteins are individually produced in Escherichia coli and purified through a series of column chromatography steps. The OMV antigenic component is produced by fermentation of N. meningitidis strain NZ98/254 (expressing outer membrane protein Porin A [PorA] serosubtype P1.4)2, followed by inactivation of the bacteria by deoxycholate, which also mediates vesicle formation. The antigens are adsorbed onto aluminum hydroxide. Each dose contains less than 0.01 mcg kanamycin (by calculation). The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex."
},
{
"NDCCode": "10135-742-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (10135-742-05) ",
"NDC11Code": "10135-0742-05",
"ProductNDC": "10135-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bisoprolol Fumarate And Hydrochlorothiazide",
"NonProprietaryName": "Bisoprolol Fumarate And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215562",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "BISOPROLOL FUMARATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "10; 6.25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220501",
"SamplePackage": "N",
"IndicationAndUsage": "Bisoprolol fumarate and hydrochlorothiazide tablets are indicated in the management of hypertension.",
"Description": "Bisoprolol fumarate and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension. It combines two antihypertensive agents in a once-daily dosage: a synthetic beta 1-selective (cardioselective) adrenoceptor blocking agent (bisoprolol fumarate) and a benzothiadiazine diuretic (hydrochlorothiazide). Bisoprolol fumarate is chemically described as (±)-1-[4-[[2-(1-methylethoxy)ethoxy]methyl] phenoxy]-3-[(1-methylethyl)amino]-2-propanol( E)-2-butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta-blocking activity. Its empirical formula is (C 18H 31NO 4) 2C 4H 4O 4and it has a molecular weight of 766.97. Its structural formula is:. Bisoprolol fumarate is a white crystalline powder, approximately equally hydrophilic and lipophilic, and readily soluble in water, methanol, ethanol, and chloroform. Hydrochlorothiazide (HCTZ) is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. It is a white, or practically white, practically odorless crystalline powder. It is slightly soluble in water, sparingly soluble in dilute sodium hydroxide solution, freely soluble in n-butylamine and dimethylformamide, sparingly soluble in methanol, and insoluble in ether, chloroform, and dilute mineral acids. Its empirical formula is C 7H 8ClN 3O 4S 2and it has a molecular weight of 297.73. Its structural formula is:. Each bisoprolol fumarate and hydrochlorothiazide - 2.5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………..2.5 mg. Hydrochlorothiazide………………………………………..6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………… 5 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 10 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………...10 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Inactive ingredients include pregelatinized starch, anhydrous dicalcium phosphate, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide. The 10 mg/6.25mg tablet also contains FD&C blue #1 aluminum lake. The 5 mg/6.25 mg tablet also contains iron oxide red & ferrosoferric oxide. The 2.5 mg/6.25 mg tablet also contains ferric oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "10135-742-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (10135-742-30) ",
"NDC11Code": "10135-0742-30",
"ProductNDC": "10135-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bisoprolol Fumarate And Hydrochlorothiazide",
"NonProprietaryName": "Bisoprolol Fumarate And Hydrochlorothiazide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215562",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "BISOPROLOL FUMARATE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "10; 6.25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220501",
"SamplePackage": "N",
"IndicationAndUsage": "Bisoprolol fumarate and hydrochlorothiazide tablets are indicated in the management of hypertension.",
"Description": "Bisoprolol fumarate and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension. It combines two antihypertensive agents in a once-daily dosage: a synthetic beta 1-selective (cardioselective) adrenoceptor blocking agent (bisoprolol fumarate) and a benzothiadiazine diuretic (hydrochlorothiazide). Bisoprolol fumarate is chemically described as (±)-1-[4-[[2-(1-methylethoxy)ethoxy]methyl] phenoxy]-3-[(1-methylethyl)amino]-2-propanol( E)-2-butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta-blocking activity. Its empirical formula is (C 18H 31NO 4) 2C 4H 4O 4and it has a molecular weight of 766.97. Its structural formula is:. Bisoprolol fumarate is a white crystalline powder, approximately equally hydrophilic and lipophilic, and readily soluble in water, methanol, ethanol, and chloroform. Hydrochlorothiazide (HCTZ) is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. It is a white, or practically white, practically odorless crystalline powder. It is slightly soluble in water, sparingly soluble in dilute sodium hydroxide solution, freely soluble in n-butylamine and dimethylformamide, sparingly soluble in methanol, and insoluble in ether, chloroform, and dilute mineral acids. Its empirical formula is C 7H 8ClN 3O 4S 2and it has a molecular weight of 297.73. Its structural formula is:. Each bisoprolol fumarate and hydrochlorothiazide - 2.5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………..2.5 mg. Hydrochlorothiazide………………………………………..6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………… 5 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 10 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………...10 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Inactive ingredients include pregelatinized starch, anhydrous dicalcium phosphate, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide. The 10 mg/6.25mg tablet also contains FD&C blue #1 aluminum lake. The 5 mg/6.25 mg tablet also contains iron oxide red & ferrosoferric oxide. The 2.5 mg/6.25 mg tablet also contains ferric oxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "21695-742-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (21695-742-30)",
"NDC11Code": "21695-0742-30",
"ProductNDC": "21695-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simvastatin",
"NonProprietaryName": "Simvastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076685",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "SIMVASTATIN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet. 1.1 Reductions in Risk of CHD Mortality and Cardiovascular Events. In patients at high risk of coronary events because of existing coronary heart disease, diabetes, peripheral vessel disease, history of stroke or other cerebrovascular disease, simvastatin tablets, USP are indicated to: 1 Reduce the risk of total mortality by reducing CHD deaths. , 2 Reduce the risk of non-fatal myocardial infarction and stroke. , 3 Reduce the need for coronary and non-coronary revascularization procedures. .",
"Description": "Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2. H. -pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1. S. -[1α,3α,7β,8β(2. S*. ,4. S*. ),-8aβ]]. The empirical formula of simvastatin is C. 25. H. 38. O. 5. and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: butylated hydroxyanisole, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc, ascorbic acid, citric acid, hypromellose, polydextrose FCC, polyethylene glycol, triacetin, iron oxide yellow (5 and 10 mg only), iron oxide red (10, 20, and 40 mg only), titanium dioxide (40 and 80 mg only), and FD&C Red # 40/Allura Red Lake (80 mg only)."
},
{
"NDCCode": "21695-742-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (21695-742-90)",
"NDC11Code": "21695-0742-90",
"ProductNDC": "21695-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Simvastatin",
"NonProprietaryName": "Simvastatin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20070523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076685",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "SIMVASTATIN",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet. 1.1 Reductions in Risk of CHD Mortality and Cardiovascular Events. In patients at high risk of coronary events because of existing coronary heart disease, diabetes, peripheral vessel disease, history of stroke or other cerebrovascular disease, simvastatin tablets, USP are indicated to: 1 Reduce the risk of total mortality by reducing CHD deaths. , 2 Reduce the risk of non-fatal myocardial infarction and stroke. , 3 Reduce the need for coronary and non-coronary revascularization procedures. .",
"Description": "Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2. H. -pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1. S. -[1α,3α,7β,8β(2. S*. ,4. S*. ),-8aβ]]. The empirical formula of simvastatin is C. 25. H. 38. O. 5. and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: butylated hydroxyanisole, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc, ascorbic acid, citric acid, hypromellose, polydextrose FCC, polyethylene glycol, triacetin, iron oxide yellow (5 and 10 mg only), iron oxide red (10, 20, and 40 mg only), titanium dioxide (40 and 80 mg only), and FD&C Red # 40/Allura Red Lake (80 mg only)."
},
{
"NDCCode": "37205-742-62",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (37205-742-62) > 12 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "37205-0742-62",
"ProductNDC": "37205-742",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy",
"ProprietaryNameSuffix": "Antihistamine",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120830",
"EndMarketingDate": "20190630",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part336",
"LabelerName": "Cardinal Health (Leader) 37205",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120830",
"EndMarketingDatePackage": "20190630",
"SamplePackage": "N"
},
{
"NDCCode": "37205-742-78",
"PackageDescription": "1 BOTTLE in 1 BOX (37205-742-78) > 100 CAPSULE in 1 BOTTLE",
"NDC11Code": "37205-0742-78",
"ProductNDC": "37205-742",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy",
"ProprietaryNameSuffix": "Antihistamine",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120830",
"EndMarketingDate": "20190630",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part336",
"LabelerName": "Cardinal Health (Leader) 37205",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20120830",
"EndMarketingDatePackage": "20190630",
"SamplePackage": "N"
},
{
"NDCCode": "43353-742-60",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-60)",
"NDC11Code": "43353-0742-60",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "43353-742-80",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-80)",
"NDC11Code": "43353-0742-80",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "43353-742-92",
"PackageDescription": "270 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-92)",
"NDC11Code": "43353-0742-92",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "43353-742-94",
"PackageDescription": "360 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-94)",
"NDC11Code": "43353-0742-94",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "43353-742-96",
"PackageDescription": "450 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-96)",
"NDC11Code": "43353-0742-96",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "43353-742-98",
"PackageDescription": "540 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-98)",
"NDC11Code": "43353-0742-98",
"ProductNDC": "43353-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA086242",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Essential hypertension, alone or as an adjunct.",
"Description": "HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "46708-742-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (46708-742-30) ",
"NDC11Code": "46708-0742-30",
"ProductNDC": "46708-742",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acitretin",
"NonProprietaryName": "Acitretin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240808",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217774",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "ACITRETIN",
"StrengthNumber": "17.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240808",
"SamplePackage": "N",
"IndicationAndUsage": "Acitretin capsules are indicated for the treatment of severe psoriasis in adults. Because of significant adverse effects associated with its use, acitretin capsules should be prescribed only by those knowledgeable in the systemic use of retinoids. In females of reproductive potential, acitretin capsules should be reserved for non-pregnant patients who are unresponsive to other therapies or whose clinical condition contraindicates the use of other treatments (see boxed CONTRAINDICATIONS AND WARNINGS — acitretin capsules can cause severe birth defects). Most patients experience relapse of psoriasis after discontinuing therapy. Subsequent courses, when clinically indicated, have produced efficacy results similar to the initial course of therapy.",
"Description": "Acitretin, USP a retinoid, is available in 10-mg, 17.5-mg, and 25-mg gelatin capsules for oral administration. Chemically, acitretin is all-trans-9-(4-methoxy-2,3,6-trimethylphenyl)-3,7-dimethyl-2,4,6,8-nonatetraenoic acid. It is a metabolite of etretinate and is related to both retinoic acid and retinol (vitamin A). It is a yellow to greenish-yellow crystalline powder with a molecular weight of 326.44. The structural formula is. Each capsule contains acitretin, microcrystalline cellulose, maltodextrin, sodium ascorbate, sodium lauryl sulfate, colloidal silicon dioxide and magnesium stearate. Gelatin capsule shells contain gelatin, iron oxide yellow, iron oxide red, titanium dioxide and sodium lauryl sulfate. Additionally, 10 mg and 25 mg gelatin capsule shells contains iron oxide black. The gelatin capsule shells are printed with edible black ink containing shellac, iron oxide black and potassium hydroxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "49348-742-36",
"PackageDescription": "177 mL in 1 BOTTLE (49348-742-36)",
"NDC11Code": "49348-0742-36",
"ProductNDC": "49348-742",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sunmark Nite Time",
"ProprietaryNameSuffix": "Cold And Flu",
"NonProprietaryName": "Acetaminophen,dextromethorphan Hbr, Doxylamine Succinate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20060428",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "McKesson",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE",
"StrengthNumber": "500; 15; 6.25",
"StrengthUnit": "mg/15mL; mg/15mL; mg/15mL",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>58160-742-25</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-742-25) * 10 VIAL in 1 CARTON (58160-753-19) / 2.5 mL in 1 VIAL (58160-753-01) * 10 VIAL in 1 CARTON (58160-855-19) / 2.5 mL in 1 VIAL (58160-855-01) </PackageDescription>
<NDC11Code>58160-0742-25</NDC11Code>
<ProductNDC>58160-742</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Arepanrix</ProprietaryName>
<NonProprietaryName>Influenza A H5 Monovalent Vaccine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20260511</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125419</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>AREPANRIX is indicated for active immunization for the prevention of disease caused by the influenza A virus H5 subtype contained in the vaccine. AREPANRIX is approved for use in individuals 6 months of age and older at increased risk of exposure to the influenza A virus H5 subtype contained in the vaccine. In individuals 6 months through 17 years of age, this indication is approved under accelerated approval based on immune responses, as measured by hemagglutination‑inhibition (HI) titers [see Clinical Studies (14.2)]. Continued approval for this indication in individuals 6 months through 17 years of age may be contingent upon verification and description of clinical benefit in a confirmatory trial.</IndicationAndUsage>
<Description>AREPANRIX (Influenza A [H5] Monovalent Vaccine, Adjuvanted) is a sterile injectable emulsion administered intramuscularly. The vaccine is supplied as 2 components: a vial of inactivated, split-virion, H5 Antigen Component and a vial of AS03 Adjuvant Component that must be combined prior to administration to form AREPANRIX. The H5 Antigen Component is manufactured according to a similar process as that used to produce the antigens contained in FLULAVAL (Influenza Vaccine) and FLULAVAL QUADRIVALENT (Influenza Vaccine), which are unadjuvanted seasonal influenza vaccines licensed in the U.S. The H5 Antigen Component is a sterile, translucent to whitish opalescent suspension in a phosphate-buffered, thimerosal‑containing saline solution that may sediment slightly. The sediment resuspends upon mixing by inversion to form a homogeneous suspension. The H5 Antigen Component is prepared from virus propagated in the allantoic cavity of embryonated hen’s eggs. The virus is inactivated with ultraviolet light treatment followed by formaldehyde treatment, purified by centrifugation, and disrupted with sodium deoxycholate. The AS03 Adjuvant Component is a homogenized, sterile, whitish to yellowish milky emulsion composed of squalene, DL-α-tocopherol, and polysorbate 80. AREPANRIX is prepared by combining the H5 Antigen Component with the AS03 Adjuvant Component. After combining, AREPANRIX is a whitish to yellowish homogenous milky emulsion. Each 0.5‑mL dose of AREPANRIX (H5N8) for individuals 18 years of age and older contains 3.75 mcg hemagglutinin (HA) of the influenza virus strain A/Astrakhan/3212/2020-like (H5N8, clade 2.3.4.4b); 5 mcg thimerosal, a mercury derivative, as a preservative (2.5 mcg mercury); and AS03 adjuvant (10.69 mg squalene, 11.86 mg DL-α-tocopherol, and 4.86 mg polysorbate 80). Each 0.5-mL dose may also contain residual amounts of ovalbumin (≤0.083 mcg), formaldehyde (≤12.5 mcg), and sodium deoxycholate (≤3.75 mcg) from the manufacturing process. Each 0.25‑mL dose of AREPANRIX (H5N8) for individuals 6 months through 17 years contains 1.9 mcg hemagglutinin (HA) of the influenza virus strain A/Astrakhan/3212/2020-like (H5N8, clade 2.3.4.4b); 2.5 mcg thimerosal, a mercury derivative, as a preservative (1.25 mcg mercury); and AS03 adjuvant (5.35 mg squalene, 5.93 mg DL-α-tocopherol, and 2.43 mg polysorbate 80). Each 0.25‑mL dose may also contain residual amounts of ovalbumin (≤0.042 mcg), formaldehyde (≤6.25 mcg), and sodium deoxycholate (≤1.88 mcg) from the manufacturing process. The vial stoppers are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>70997-742-25</NDCCode>
<PackageDescription>25 kg in 1 DRUM (70997-742-25)</PackageDescription>
<NDC11Code>70997-0742-25</NDC11Code>
<ProductNDC>70997-742</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Guaifenesin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20160930</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Lactose (India) Limited</LabelerName>
<SubstanceName>GUAIFENESIN</SubstanceName>
<StrengthNumber>.955</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>76420-742-01</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (76420-742-01) * 10 VIAL, SINGLE-DOSE in 1 CARTON (55150-165-05) / 5 mL in 1 VIAL, SINGLE-DOSE * 25 VIAL in 1 CARTON (70121-1049-5) / 1 mL in 1 VIAL * .9 mL in 1 PACKET (67777-419-02) * 10 mL in 1 VIAL, SINGLE-DOSE (0409-1162-18) </PackageDescription>
<NDC11Code>76420-0742-01</NDC11Code>
<ProductNDC>76420-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mlk Kit F2</ProprietaryName>
<NonProprietaryName>Marcaine, Lidocaine, Kenalog, Povidone Iodine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRA-ARTICULAR; INTRAMUSCULAR; TOPICAL</RouteName>
<StartMarketingDate>20180510</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58160-757-15</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-757-15) * .5 mL in 1 VIAL (58160-730-03) * .5 mL in 1 SYRINGE (58160-750-03) </PackageDescription>
<NDC11Code>58160-0757-15</NDC11Code>
<ProductNDC>58160-757</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Penmenvy</ProprietaryName>
<NonProprietaryName>Meningococcal (groups A, B, C, W And Y)</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20250214</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125819</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PENMENVY is a vaccine indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroups A, B, C, W, and Y in individuals 10 through 25 years of age.</IndicationAndUsage>
<Description>PENMENVY (Meningococcal Groups A, B, C, W, and Y Vaccine) is a sterile injectable suspension for intramuscular use. The vaccine is supplied as one vial of Lyophilized MenACWY Component which is reconstituted at the time of use with the accompanying prefilled syringe of MenB Component. The Lyophilized MenACWY Component contains N. meningitidis serogroups A, C, W, and Y oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis serogroups A, C, W, or Y. N. meningitidis serogroup A, C, W, and Y strains are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW, and MenY polysaccharides are purified by several steps, including extraction, filtration, and precipitation. MenC polysaccharide is purified by a combination of extraction, chromatography, and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. The C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from the purified polysaccharides which are processed by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the four drug substances, which are formulated with sucrose and phosphate and lyophilized to form the Lyophilized MenACWY Component. The Lyophilized MenACWY Component is a white to off‑white lyophilized cake. The MenB Component contains recombinant N. meningitidis proteins Neisseria adhesin A (NadA), Neisserial Heparin Binding Antigen (NHBA), and factor H binding protein (fHbp), and Outer Membrane Vesicles (OMV). The NadA component is a fragment of the full‑length protein derived from N. meningitidis strain 2996 (peptide 8 variant 2/3).2 The NHBA component is a recombinant fusion protein comprised of NHBA (peptide 2)2 and accessory protein 953 derived from N. meningitidis strains NZ98/254 and 2996, respectively. The fHbp component is a recombinant fusion protein comprised of fHbp (variant 1.1)2 and the accessory protein 936 derived from N. meningitidis strains MC58 and 2996, respectively. These 3 recombinant proteins are individually produced in Escherichia coli and purified through a series of column chromatography steps. The OMV antigenic component is produced by fermentation of N. meningitidis strain NZ98/254 (expressing outer membrane protein Porin A [PorA] serosubtype P1.4),3 followed by inactivation of the bacteria by deoxycholate, which also mediates vesicle formation. The antigens are adsorbed onto aluminum hydroxide. The MenB Component is a white opalescent suspension. After reconstitution, each approximately 0.5‑mL dose contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenW, and MenY oligosaccharides; 25.9 to 64.1 mcg CRM197 protein; 50 mcg each of recombinant proteins NadA, NHBA, and fHbp; and 25 mcg of OMV. Each dose also contains 1.5 mg aluminum hydroxide (0.5 mg of Al3+), 3.125 mg sodium chloride, 0.776 mg histidine, 22.5 mg sucrose, and ≤0.7 mg potassium phosphate salts. Each dose contains less than 0.01 mcg kanamycin (by calculation). Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. After reconstitution, PENMENVY is a white opalescent suspension. The tip cap and rubber plunger of the prefilled syringe and the stopper of the vial are not made with natural rubber latex. PENMENVY does not contain preservatives.</Description>
</NDC>
<NDC>
<NDCCode>58160-810-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (58160-810-11) > .5 mL in 1 VIAL (58160-810-01) </PackageDescription>
<NDC11Code>58160-0810-11</NDC11Code>
<ProductNDC>58160-810</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Infanrix</ProprietaryName>
<NonProprietaryName>Diphtheria And Tetanus Toxoids And Acellular Pertussis Vaccine Adsorbed</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20090724</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103647</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>25; 8; 25; 10; 25</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-12-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58160-810-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-810-52) / .5 mL in 1 SYRINGE (58160-810-43) </PackageDescription>
<NDC11Code>58160-0810-52</NDC11Code>
<ProductNDC>58160-810</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Infanrix</ProprietaryName>
<NonProprietaryName>Diphtheria And Tetanus Toxoids And Acellular Pertussis Vaccine Adsorbed</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20090724</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103647</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>10; 25; 25; 25; 8</StrengthNumber>
<StrengthUnit>[iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>INFANRIX is indicated for active immunization against diphtheria, tetanus, and pertussis as a 5-dose series in infants and children aged 6 weeks through 6 years (prior to the seventh birthday).</IndicationAndUsage>
<Description>INFANRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Vaccine Adsorbed) is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), and 8 mcg of pertactin (69 kiloDalton outer membrane protein). The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor present an undue risk for bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. Diphtheria and tetanus toxoids and pertussis antigens (PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis components (PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. Each 0.5 mL dose contains aluminum hydroxide as adjuvant (formulated to contain 0.5 mg aluminum) and 4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. INFANRIX is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>58160-811-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-811-52) / .5 mL in 1 SYRINGE (58160-811-43) </PackageDescription>
<NDC11Code>58160-0811-52</NDC11Code>
<ProductNDC>58160-811</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Pediarix</ProprietaryName>
<NonProprietaryName>Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed, Hepatitis B (recombinant) And Inactivated Poliovirus Vaccine Combined</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20090724</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103907</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); HEPATITIS B VIRUS SUBTYPE ADW2 HBSAG SURFACE PROTEIN ANTIGEN; POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>25; 10; 25; 25; 8; 10; 40; 8; 32</StrengthNumber>
<StrengthUnit>[iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090724</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PEDIARIX is indicated for active immunization against diphtheria, tetanus, pertussis, infection caused by all known subtypes of hepatitis B virus, and poliomyelitis. PEDIARIX is approved for use as a 3-dose series in infants born of hepatitis B surface antigen (HBsAg)-negative mothers. PEDIARIX may be given as early as 6 weeks of age through 6 years of age (prior to the seventh birthday).</IndicationAndUsage>
<Description>PEDIARIX [Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed, Hepatitis B (Recombinant) and Inactivated Poliovirus Vaccine] is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), 8 mcg of pertactin (69 kiloDalton outer membrane protein), 10 mcg of HBsAg, 40 D-antigen Units (DU) of Type 1 poliovirus (Mahoney), 8 DU of Type 2 poliovirus (MEF-1), and 32 DU of Type 3 poliovirus (Saukett). The diphtheria, tetanus, and pertussis components are the same as those in INFANRIX and KINRIX. The hepatitis B surface antigen is the same as that in ENGERIX-B. The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor present an undue risk for bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. The hepatitis B surface antigen is obtained by culturing genetically engineered Saccharomyces cerevisiae (S. cerevisiae) cells, which carry the surface antigen gene of the hepatitis B virus, in synthetic medium. The surface antigen expressed in the S. cerevisiae cells is purified by several physiochemical steps, which include precipitation, ion exchange chromatography, and ultrafiltration. The inactivated poliovirus component is an enhanced potency component. Each of the 3 strains of poliovirus is individually grown in VERO cells, a continuous line of monkey kidney cells, cultivated on microcarriers. Calf serum and lactalbumin hydrolysate are used during VERO cell culture and/or virus culture. Calf serum is sourced from countries the USDA has determined neither have nor present an undue risk for BSE. After clarification, each viral suspension is purified by ultrafiltration, diafiltration, and successive chromatographic steps, and inactivated with formaldehyde. The 3 purified viral strains are then pooled to form a trivalent concentrate. Diphtheria and tetanus toxoids and pertussis antigens (inactivated PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. The hepatitis B component is adsorbed onto aluminum phosphate. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis component (inactivated PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. Potency of the hepatitis B component is established by HBsAg ELISA. The potency of the inactivated poliovirus component is determined by using the D-antigen ELISA and by a poliovirus-neutralizing cell culture assay on sera from previously immunized rats. Each 0.5 mL dose contains aluminum hydroxide and aluminum phosphate as adjuvants (formulated to contain 0.7 mg aluminum) and ≤4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). Neomycin sulfate and polymyxin B sulfate are used in the poliovirus vaccine manufacturing process and may be present in the final vaccine at ≤0.05 ng neomycin and ≤0.01 ng polymyxin B per dose. The procedures used to manufacture the HBsAg antigen result in a product that contains ≤5% yeast protein. The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. PEDIARIX is formulated without preservatives.</Description>
</NDC>
<NDC>
<NDCCode>58160-812-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (58160-812-11) > .5 mL in 1 VIAL (58160-812-01) </PackageDescription>
<NDC11Code>58160-0812-11</NDC11Code>
<ProductNDC>58160-812</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Kinrix</ProprietaryName>
<NonProprietaryName>Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed And Inactivated Poliovirus Vaccine</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20080709</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125260</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>25; 8; 25; 10; 25; 40; 8; 32</StrengthNumber>
<StrengthUnit>[iU]/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58160-812-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-812-52) / .5 mL in 1 SYRINGE (58160-812-43) </PackageDescription>
<NDC11Code>58160-0812-52</NDC11Code>
<ProductNDC>58160-812</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Kinrix</ProprietaryName>
<NonProprietaryName>Diphtheria And Tetanus Toxoids And Acellular Pertussis Adsorbed And Inactivated Poliovirus Vaccine</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20080709</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125260</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>CORYNEBACTERIUM DIPHTHERIAE TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); CLOSTRIDIUM TETANI TOXOID ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS FILAMENTOUS HEMAGGLUTININ ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS PERTACTIN ANTIGEN (FORMALDEHYDE INACTIVATED); BORDETELLA PERTUSSIS TOXOID ANTIGEN (FORMALDEHYDE, GLUTARALDEHYDE INACTIVATED); POLIOVIRUS TYPE 1 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 2 ANTIGEN (FORMALDEHYDE INACTIVATED); POLIOVIRUS TYPE 3 ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>25; 10; 25; 8; 25; 40; 8; 32</StrengthNumber>
<StrengthUnit>[iU]/.5mL; [iU]/.5mL; [iU]/.5mL; ug/.5mL; ug/.5mL; [iU]/.5mL; [iU]/.5mL; [iU]/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Diphtheria Toxoid [CS], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Bordetella Pertussis Vaccine [EPC], Inactivated Clostridium Tetani Vaccine [EPC], Inactivated Corynebacterium Diphtheriae Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Inactivated Poliovirus Vaccine [EPC], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Pertussis Vaccine [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Poliovirus Vaccines [CS], Tetanus Toxoid [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>A single dose of KINRIX is indicated for active immunization against diphtheria, tetanus, pertussis, and poliomyelitis as the fifth dose in the diphtheria, tetanus, and acellular pertussis (DTaP) vaccine series and the fourth dose in the inactivated poliovirus vaccine (IPV) series in children aged 4 through 6 years (prior to the seventh birthday) whose previous DTaP vaccine doses have been with INFANRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Vaccine Adsorbed) and/or PEDIARIX [Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed, Hepatitis B (Recombinant) and Inactivated Poliovirus Vaccine] for the first 3 doses and INFANRIX for the fourth dose.</IndicationAndUsage>
<Description>KINRIX (Diphtheria and Tetanus Toxoids and Acellular Pertussis Adsorbed and Inactivated Poliovirus Vaccine) is a noninfectious, sterile, injectable suspension for intramuscular use. Each 0.5 mL dose is formulated to contain 25 Lf of diphtheria toxoid, 10 Lf of tetanus toxoid, 25 mcg of inactivated pertussis toxin (PT), 25 mcg of filamentous hemagglutinin (FHA), 8 mcg of pertactin (69 kiloDalton outer membrane protein), 40 D‑antigen Units (DU) of Type 1 poliovirus (Mahoney), 8 DU of Type 2 poliovirus (MEF‑1), and 32 DU of Type 3 poliovirus (Saukett). The diphtheria, tetanus, and pertussis components of KINRIX are the same as those in INFANRIX and PEDIARIX and the poliovirus component is the same as that in PEDIARIX. The diphtheria toxin is produced by growing Corynebacterium diphtheriae (C. diphtheriae) in Fenton medium containing a bovine extract. Tetanus toxin is produced by growing Clostridium tetani (C. tetani) in a modified Latham medium derived from bovine casein. The bovine materials used in these extracts are sourced from countries which the United States Department of Agriculture (USDA) has determined neither have nor are at risk of bovine spongiform encephalopathy (BSE). Both toxins are detoxified with formaldehyde, concentrated by ultrafiltration, and purified by precipitation, dialysis, and sterile filtration. The acellular pertussis antigens (PT, FHA, and pertactin) are isolated from Bordetella pertussis (B. pertussis) culture grown in modified Stainer-Scholte liquid medium. PT and FHA are isolated from the fermentation broth; pertactin is extracted from the cells by heat treatment and flocculation. The antigens are purified in successive chromatographic and precipitation steps. PT is detoxified using glutaraldehyde and formaldehyde. FHA and pertactin are treated with formaldehyde. Diphtheria and tetanus toxoids and pertussis antigens (inactivated PT, FHA, and pertactin) are individually adsorbed onto aluminum hydroxide. The inactivated poliovirus component of KINRIX is an enhanced potency component. Each of the 3 strains of poliovirus is individually grown in VERO cells, a continuous line of monkey kidney cells, cultivated on microcarriers. Calf serum and lactalbumin hydrolysate are used during VERO cell culture and/or virus culture. Calf serum is sourced from countries the USDA has determined neither have nor are at risk of BSE. After clarification, each viral suspension is purified by ultrafiltration, diafiltration, and successive chromatographic steps, and inactivated with formaldehyde. The 3 purified viral strains are then pooled to form a trivalent concentrate. Diphtheria and tetanus toxoid potency is determined by measuring the amount of neutralizing antitoxin in previously immunized guinea pigs. The potency of the acellular pertussis components (inactivated PT, FHA, and pertactin) is determined by enzyme-linked immunosorbent assay (ELISA) on sera from previously immunized mice. The potency of the inactivated poliovirus component is determined by using the D-antigen ELISA and by a poliovirus-neutralizing cell culture assay on sera from previously immunized rats. Each 0.5 mL dose contains aluminum hydroxide as adjuvant (formulated to contain 0.5 mg aluminum) and ≤4.4 mg of sodium chloride. The aluminum content is measured by assay. Each dose also contains ≤100 mcg of residual formaldehyde and ≤100 mcg of polysorbate 80 (Tween 80). Neomycin sulfate and polymyxin B sulfate are used in the poliovirus vaccine manufacturing process and may be present in the final vaccine at ≤0.05 ng neomycin and ≤0.01 ng polymyxin B per dose. The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex. KINRIX does not contain a preservative.</Description>
</NDC>
<NDC>
<NDCCode>58160-819-12</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-819-12) * .5 mL in 1 VIAL (58160-828-01) * .5 mL in 1 VIAL (58160-829-01) </PackageDescription>
<NDC11Code>58160-0819-12</NDC11Code>
<ProductNDC>58160-819</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Shingrix</ProprietaryName>
<NonProprietaryName>Zoster Vaccine Recombinant, Adjuvanted</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20171020</StartMarketingDate>
<EndMarketingDate>20250823</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125614</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20171020</StartMarketingDatePackage>
<EndMarketingDatePackage>20250823</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SHINGRIX is a vaccine indicated for prevention of herpes zoster (HZ) (shingles): 1 in adults aged 50 years and older., 2 in adults aged 18 years and older who are or will be at increased risk of HZ due to immunodeficiency or immunosuppression caused by known disease or therapy.</IndicationAndUsage>
<Description>SHINGRIX (Zoster Vaccine Recombinant, Adjuvanted) is a sterile injectable suspension for intramuscular use that contains recombinant varicella zoster virus gE antigen adjuvanted with AS01B. The vial and vial presentation is supplied as a vial of lyophilized recombinant varicella zoster virus surface gE antigen component (Lyophilized gE Antigen Component), which must be reconstituted at the time of use with the accompanying vial of AS01B (Adjuvant Suspension Component) to form SHINGRIX. The SHINGRIX prefilled syringe presentation does not require reconstitution. SHINGRIX is a sterile, opalescent, colorless to pale brownish liquid. The gE antigen is obtained by culturing genetically engineered Chinese Hamster Ovary cells, which carry a truncated gE gene, in media containing amino acids, with no albumin, antibiotics, or animal‑derived proteins. The gE protein is purified by several chromatographic steps and formulated with excipients. The AS01B adjuvant is composed of 3‑O‑desacyl‑4’‑monophosphoryl lipid A (MPL) derived from Salmonella minnesota and QS‑21, a saponin purified from Quillaja saponaria Molina plant extract, and is combined in a liposomal formulation. The liposomes are composed of dioleoyl phosphatidylcholine (DOPC) and cholesterol in phosphate‑buffered saline solution containing disodium phosphate anhydrous, potassium dihydrogen phosphate, sodium chloride, and water for injection. Each 0.5‑mL dose is formulated to contain 50 mcg of the recombinant gE antigen, 50 mcg of MPL, and 50 mcg of QS‑21. Each dose also contains 20 mg of sucrose, 4.385 mg of sodium chloride, 1 mg of DOPC, 0.54 mg of potassium dihydrogen phosphate, 0.25 mg of cholesterol, 0.160 mg of sodium dihydrogen phosphate dihydrate, 0.15 mg of disodium phosphate anhydrous, 0.116 mg of dipotassium phosphate, and 0.08 mg of polysorbate 80. SHINGRIX does not contain preservatives. Each dose may also contain residual amounts of host cell proteins (≤3.0%) and DNA (≤2.1 picograms) from the manufacturing process. In the vial and vial presentation, the vial stoppers are not made with natural rubber latex. In the prefilled syringe presentation, the tip cap and rubber plunger stopper are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>58160-827-30</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (58160-827-30) / .5 mL in 1 VIAL (58160-827-03) </PackageDescription>
<NDC11Code>58160-0827-30</NDC11Code>
<ProductNDC>58160-827</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Menveo</ProprietaryName>
<NonProprietaryName>Meningococcal (groups A, C, Y And W-135) Oligosaccharide Diphtheria Crm197 Conjugate Vaccine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20221209</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125300</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>NEISSERIA MENINGITIDIS GROUP A CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP C CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP W-135 CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN; NEISSERIA MENINGITIDIS GROUP Y CAPSULAR OLIGOSACCHARIDE DIPHTHERIA CRM197 PROTEIN CONJUGATE ANTIGEN</SubstanceName>
<StrengthNumber>10; 5; 5; 5</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Pharm_Classes>Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Actively Acquired Immunity [PE], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Inactivated Meningococcal Vaccine [EPC], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Meningococcal Vaccines [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS], Vaccines, Inactivated [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MENVEO is a vaccine indicated for active immunization to prevent invasive meningococcal disease caused by Neisseria meningitidis serogroups A, C, Y, and W-135 in individuals 2 months through 55 years of age. MENVEO does not prevent N. meningitidis serogroup B infections.</IndicationAndUsage>
<Description>MENVEO [Meningococcal (Groups A, C, Y, and W-135) Oligosaccharide Diphtheria CRM197 Conjugate Vaccine] is a sterile liquid vaccine administered by intramuscular injection that contains N. meningitidis serogroup A, C, Y, and W-135 oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis (serogroups A, C, Y, or W-135). N. meningitidis strains A, C, Y, and W-135 are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW-135, and MenY polysaccharides are purified by several extraction and precipitation steps. MenC polysaccharide is purified by a combination of chromatography and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from purified polysaccharides by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the 4 drug substances, which compose the final vaccine. The vaccine contains no preservative or adjuvant. Each dose of vaccine contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenY, and MenW-135 oligosaccharides; and 25.9 to 64.1 mcg CRM197 protein. Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. The vials in which the vaccine components are contained are composed of Type I glass, USP. The container closures (synthetic rubber stoppers) are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>58160-854-52</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-854-52) * 10 VIAL in 1 CARTON (58160-851-10) / 1 mL in 1 VIAL (58160-851-01) * 1 mL in 1 APPLICATOR (58160-853-02) </PackageDescription>
<NDC11Code>58160-0854-52</NDC11Code>
<ProductNDC>58160-854</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Rotarix</ProprietaryName>
<NonProprietaryName>Rotavirus Vaccine, Live, Oral</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20110113</StartMarketingDate>
<EndMarketingDate>20250224</EndMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125265</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2025-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110113</StartMarketingDatePackage>
<EndMarketingDatePackage>20250224</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ROTARIX is indicated for the prevention of rotavirus gastroenteritis caused by G1 and non-G1 types (G3, G4, and G9) when administered as a 2-dose series [see Clinical Studies (14.3)]. ROTARIX is approved for use in infants 6 weeks and up to 24 weeks of age.</IndicationAndUsage>
<Description>ROTARIX (Rotavirus Vaccine, Live, Oral), for oral administration, is a live, attenuated rotavirus vaccine derived from the human 89-12 strain which belongs to G1P[8] type. The rotavirus vaccine strain is propagated on Vero cells. There are two formulations of ROTARIX: a reconstituted lyophilized formulation (supplied in a vial and oral dosing applicator presentation) and a liquid formulation (supplied in an oral dosing applicator only presentation). Formulation for the Vial and Oral Dosing Applicator Presentation. After reconstitution of the lyophilized vaccine component, each 1 mL dose of the ROTARIX formulation for the vial and oral dosing applicator presentation contains at least 106.0 median Cell Culture Infective Dose (CCID50) of live, attenuated rotavirus. The lyophilized vaccine component of this ROTARIX formulation contains amino acids, dextran, Dulbecco’s Modified Eagle Medium (DMEM), sorbitol, and sucrose. DMEM contains the following ingredients: sodium chloride, potassium chloride, magnesium sulfate, ferric (III) nitrate, sodium dihydrogen phosphate, sodium pyruvate, D-glucose, concentrated vitamin solution, L-cystine, L-tyrosine, amino acids solution, L-glutamine, calcium chloride, and sodium hydrogenocarbonate. In the manufacturing process, porcine-derived materials are used. Porcine circovirus type 1 (PCV-1) is present in this ROTARIX formulation. PCV-1 is not known to cause disease in humans. The liquid diluent contains calcium carbonate, sterile water, and xanthan. The diluent includes an antacid component (calcium carbonate) to protect the vaccine during passage through the stomach and prevent its inactivation due to the acidic environment of the stomach. This ROTARIX formulation is available in single-dose vials of lyophilized vaccine, accompanied by a prefilled oral dosing applicator of liquid diluent [see How Supplied/Storage and Handling (16)]. The tip caps of the prefilled oral dosing applicators contain natural rubber latex; the vial stoppers are not made with natural rubber latex. This ROTARIX formulation contains no preservatives. Formulation for the Oral Dosing Applicator Only Presentation. Each 1.5 mL dose of the ROTARIX formulation for the oral dosing applicator only presentation contains at least 106.0 CCID50 of live, attenuated rotavirus. This ROTARIX formulation contains disodium adipate, Dulbecco’s Modified Eagle Medium (DMEM), sucrose, and sterile water. DMEM contains the following ingredients: sodium chloride, potassium chloride, magnesium sulfate, ferric (III) nitrate, sodium dihydrogen phosphate, sodium pyruvate, D-glucose, concentrated vitamin solution, L-cystine, L-tyrosine, amino acids solution, L-glutamine, calcium chloride, and sodium hydrogenocarbonate. This ROTARIX formulation contains an antacid component (disodium adipate) to protect the vaccine during passage through the stomach and prevent its inactivation due to the acidic environment of the stomach. This ROTARIX formulation is available in single-dose prefilled oral dosing applicator [see How Supplied/Storage and Handling (16)]. The tip caps of the prefilled oral dosing applicators contain natural rubber latex. This ROTARIX formulation contains no preservatives.</Description>
</NDC>
<NDC>
<NDCCode>58160-905-52</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-905-52) > .5 mL in 1 SYRINGE (58160-905-41)</PackageDescription>
<NDC11Code>58160-0905-52</NDC11Code>
<ProductNDC>58160-905</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Fluarix Quadrivalent</ProprietaryName>
<ProprietaryNameSuffix>2016/2017</ProprietaryNameSuffix>
<NonProprietaryName>Influenza Virus Vaccine</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20160701</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125127</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>INFLUENZA A VIRUS A/CHRISTCHURCH/16/2010 NIB-74XP (H1N1) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA A VIRUS A/HONG KONG/4801/2014 X-263B (H3N2) ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/PHUKET/3073/2013 ANTIGEN (FORMALDEHYDE INACTIVATED); INFLUENZA B VIRUS B/BRISBANE/60/2008 ANTIGEN (FORMALDEHYDE INACTIVATED)</SubstanceName>
<StrengthNumber>15; 15; 15; 15</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-07-25</LastUpdate>
</NDC>
<NDC>
<NDCCode>58160-955-09</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (58160-955-09) * .5 mL in 1 VIAL, SINGLE-DOSE (58160-958-01) * .5 mL in 1 VIAL, SINGLE-DOSE (58160-959-01) </PackageDescription>
<NDC11Code>58160-0955-09</NDC11Code>
<ProductNDC>58160-955</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Menveo</ProprietaryName>
<NonProprietaryName>Meningococcal (groups A, C, Y And W-135) Oligosaccharide Diphtheria Crm197 Conjugate Vaccine</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20170301</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125300</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>MENVEO is a vaccine indicated for active immunization to prevent invasive meningococcal disease caused by Neisseria meningitidis serogroups A, C, Y, and W-135 in individuals 2 months through 55 years of age. MENVEO does not prevent N. meningitidis serogroup B infections.</IndicationAndUsage>
<Description>MENVEO [Meningococcal (Groups A, C, Y, and W-135) Oligosaccharide Diphtheria CRM197 Conjugate Vaccine] is a sterile liquid vaccine administered by intramuscular injection that contains N. meningitidis serogroup A, C, Y, and W-135 oligosaccharides conjugated individually to Corynebacterium diphtheriae CRM197 protein. The polysaccharides are produced by bacterial fermentation of N. meningitidis (serogroups A, C, Y, or W-135). N. meningitidis strains A, C, Y, and W-135 are each cultured and grown on Franz Complete medium and treated with formaldehyde. MenA, MenW-135, and MenY polysaccharides are purified by several extraction and precipitation steps. MenC polysaccharide is purified by a combination of chromatography and precipitation steps. The protein carrier (CRM197) is produced by bacterial fermentation and is purified by a series of chromatography and ultrafiltration steps. C. diphtheriae is cultured and grown on CY medium containing yeast extracts and amino acids. The oligosaccharides are prepared for conjugation from purified polysaccharides by hydrolysis, sizing, and reductive amination. After activation, each oligosaccharide is covalently linked to the CRM197 protein. The resulting glycoconjugates are purified to yield the 4 drug substances, which compose the final vaccine. The vaccine contains no preservative or adjuvant. Each dose of vaccine contains 10 mcg MenA oligosaccharide; 5 mcg of each of MenC, MenY, and MenW-135 oligosaccharides; and 25.9 to 64.1 mcg CRM197 protein. Residual formaldehyde per dose is estimated to be not more than 0.30 mcg. The vials in which the vaccine components are contained are composed of Type I glass, USP. The container closures (synthetic rubber stoppers) are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>58160-976-06</NDCCode>
<PackageDescription>1 SYRINGE in 1 CARTON (58160-976-06) > .5 mL in 1 SYRINGE (58160-976-02) </PackageDescription>
<NDC11Code>58160-0976-06</NDC11Code>
<ProductNDC>58160-976</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Bexsero</ProprietaryName>
<NonProprietaryName>Neisseria Meningitidis Serogroup B Nhba Fusion Protein Antigen, Neisseria Meningitidis Serogroup B Fhbp Fusion Protein Antigen And Neisseria Meningitidis Serogroup B Nada Protein Antigen</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125546</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>NEISSERIA MENINGITIDIS GROUP B NHBA FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B FHBP FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B NADA PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B STRAIN NZ98/254 OUTER MEMBRANE VESICLE</SubstanceName>
<StrengthNumber>50; 50; 50; 25</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58160-976-20</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (58160-976-20) / .5 mL in 1 SYRINGE (58160-976-02) </PackageDescription>
<NDC11Code>58160-0976-20</NDC11Code>
<ProductNDC>58160-976</ProductNDC>
<ProductTypeName>VACCINE</ProductTypeName>
<ProprietaryName>Bexsero</ProprietaryName>
<NonProprietaryName>Neisseria Meningitidis Serogroup B Nhba Fusion Protein Antigen, Neisseria Meningitidis Serogroup B Fhbp Fusion Protein Antigen And Neisseria Meningitidis Serogroup B Nada Protein Antigen</NonProprietaryName>
<DosageFormName>INJECTION, SUSPENSION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125546</ApplicationNumber>
<LabelerName>GlaxoSmithKline Biologicals SA</LabelerName>
<SubstanceName>NEISSERIA MENINGITIDIS GROUP B NHBA FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B FHBP FUSION PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B NADA PROTEIN ANTIGEN; NEISSERIA MENINGITIDIS GROUP B STRAIN NZ98/254 OUTER MEMBRANE VESICLE ANTIGEN</SubstanceName>
<StrengthNumber>50; 50; 50; 25</StrengthNumber>
<StrengthUnit>ug/.5mL; ug/.5mL; ug/.5mL; ug/.5mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BEXSERO is a vaccine indicated for active immunization to prevent invasive disease caused by Neisseria meningitidis serogroup B. BEXSERO is approved for use in individuals aged 10 through 25 years.</IndicationAndUsage>
<Description>BEXSERO (Meningococcal Group B Vaccine) is a sterile, white, opalescent, injectable suspension for intramuscular use. Each 0.5-mL dose of BEXSERO is formulated to contain 50 mcg each of recombinant proteins Neisserial adhesin A (NadA), Neisserial Heparin Binding Antigen (NHBA), and factor H binding protein (fHbp), and 25 mcg of Outer Membrane Vesicles (OMV), 1.5 mg aluminum hydroxide (0.519 mg of Al3+), 3.125 mg sodium chloride, 0.776 mg histidine, and 10 mg sucrose at pH 6.4 to 6.7. The NadA component is a fragment of the full-length protein derived from N. meningitidis strain 2996 (peptide 8 variant 2/3)1. The NHBA component is a recombinant fusion protein comprised of NHBA (peptide 2)1 and accessory protein 953 derived from N. meningitidis strains NZ98/254 and 2996, respectively. The fHbp component is a recombinant fusion protein comprised of fHbp (variant 1.1)1 and the accessory protein 936 derived from N. meningitidis strains MC58 and 2996, respectively. These 3 recombinant proteins are individually produced in Escherichia coli and purified through a series of column chromatography steps. The OMV antigenic component is produced by fermentation of N. meningitidis strain NZ98/254 (expressing outer membrane protein Porin A [PorA] serosubtype P1.4)2, followed by inactivation of the bacteria by deoxycholate, which also mediates vesicle formation. The antigens are adsorbed onto aluminum hydroxide. Each dose contains less than 0.01 mcg kanamycin (by calculation). The tip cap and rubber plunger stopper of the prefilled syringe are not made with natural rubber latex.</Description>
</NDC>
<NDC>
<NDCCode>10135-742-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (10135-742-05) </PackageDescription>
<NDC11Code>10135-0742-05</NDC11Code>
<ProductNDC>10135-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215562</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BISOPROLOL FUMARATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>10; 6.25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bisoprolol fumarate and hydrochlorothiazide tablets are indicated in the management of hypertension.</IndicationAndUsage>
<Description>Bisoprolol fumarate and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension. It combines two antihypertensive agents in a once-daily dosage: a synthetic beta 1-selective (cardioselective) adrenoceptor blocking agent (bisoprolol fumarate) and a benzothiadiazine diuretic (hydrochlorothiazide). Bisoprolol fumarate is chemically described as (±)-1-[4-[[2-(1-methylethoxy)ethoxy]methyl] phenoxy]-3-[(1-methylethyl)amino]-2-propanol( E)-2-butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta-blocking activity. Its empirical formula is (C 18H 31NO 4) 2C 4H 4O 4and it has a molecular weight of 766.97. Its structural formula is:. Bisoprolol fumarate is a white crystalline powder, approximately equally hydrophilic and lipophilic, and readily soluble in water, methanol, ethanol, and chloroform. Hydrochlorothiazide (HCTZ) is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. It is a white, or practically white, practically odorless crystalline powder. It is slightly soluble in water, sparingly soluble in dilute sodium hydroxide solution, freely soluble in n-butylamine and dimethylformamide, sparingly soluble in methanol, and insoluble in ether, chloroform, and dilute mineral acids. Its empirical formula is C 7H 8ClN 3O 4S 2and it has a molecular weight of 297.73. Its structural formula is:. Each bisoprolol fumarate and hydrochlorothiazide - 2.5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………..2.5 mg. Hydrochlorothiazide………………………………………..6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………… 5 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 10 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………...10 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Inactive ingredients include pregelatinized starch, anhydrous dicalcium phosphate, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide. The 10 mg/6.25mg tablet also contains FD&C blue #1 aluminum lake. The 5 mg/6.25 mg tablet also contains iron oxide red & ferrosoferric oxide. The 2.5 mg/6.25 mg tablet also contains ferric oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>10135-742-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (10135-742-30) </PackageDescription>
<NDC11Code>10135-0742-30</NDC11Code>
<ProductNDC>10135-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215562</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BISOPROLOL FUMARATE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>10; 6.25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bisoprolol fumarate and hydrochlorothiazide tablets are indicated in the management of hypertension.</IndicationAndUsage>
<Description>Bisoprolol fumarate and hydrochlorothiazide tablets, USP are indicated for the treatment of hypertension. It combines two antihypertensive agents in a once-daily dosage: a synthetic beta 1-selective (cardioselective) adrenoceptor blocking agent (bisoprolol fumarate) and a benzothiadiazine diuretic (hydrochlorothiazide). Bisoprolol fumarate is chemically described as (±)-1-[4-[[2-(1-methylethoxy)ethoxy]methyl] phenoxy]-3-[(1-methylethyl)amino]-2-propanol( E)-2-butenedioate (2:1) (salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta-blocking activity. Its empirical formula is (C 18H 31NO 4) 2C 4H 4O 4and it has a molecular weight of 766.97. Its structural formula is:. Bisoprolol fumarate is a white crystalline powder, approximately equally hydrophilic and lipophilic, and readily soluble in water, methanol, ethanol, and chloroform. Hydrochlorothiazide (HCTZ) is 6-Chloro-3,4-dihydro-2 H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. It is a white, or practically white, practically odorless crystalline powder. It is slightly soluble in water, sparingly soluble in dilute sodium hydroxide solution, freely soluble in n-butylamine and dimethylformamide, sparingly soluble in methanol, and insoluble in ether, chloroform, and dilute mineral acids. Its empirical formula is C 7H 8ClN 3O 4S 2and it has a molecular weight of 297.73. Its structural formula is:. Each bisoprolol fumarate and hydrochlorothiazide - 2.5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………..2.5 mg. Hydrochlorothiazide………………………………………..6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 5 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………… 5 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Each bisoprolol fumarate and hydrochlorothiazide - 10 mg/6.25 mg tablet, USP for oral administration contains. Bisoprolol fumarate…………………………………………...10 mg. Hydrochlorothiazide……………………………………….. 6.25 mg. Inactive ingredients include pregelatinized starch, anhydrous dicalcium phosphate, magnesium stearate, microcrystalline cellulose, colloidal silicon dioxide. The 10 mg/6.25mg tablet also contains FD&C blue #1 aluminum lake. The 5 mg/6.25 mg tablet also contains iron oxide red & ferrosoferric oxide. The 2.5 mg/6.25 mg tablet also contains ferric oxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>21695-742-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (21695-742-30)</PackageDescription>
<NDC11Code>21695-0742-30</NDC11Code>
<ProductNDC>21695-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simvastatin</ProprietaryName>
<NonProprietaryName>Simvastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076685</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>SIMVASTATIN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet. 1.1 Reductions in Risk of CHD Mortality and Cardiovascular Events. In patients at high risk of coronary events because of existing coronary heart disease, diabetes, peripheral vessel disease, history of stroke or other cerebrovascular disease, simvastatin tablets, USP are indicated to: 1 Reduce the risk of total mortality by reducing CHD deaths. , 2 Reduce the risk of non-fatal myocardial infarction and stroke. , 3 Reduce the need for coronary and non-coronary revascularization procedures. .</IndicationAndUsage>
<Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2. H. -pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1. S. -[1α,3α,7β,8β(2. S*. ,4. S*. ),-8aβ]]. The empirical formula of simvastatin is C. 25. H. 38. O. 5. and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: butylated hydroxyanisole, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc, ascorbic acid, citric acid, hypromellose, polydextrose FCC, polyethylene glycol, triacetin, iron oxide yellow (5 and 10 mg only), iron oxide red (10, 20, and 40 mg only), titanium dioxide (40 and 80 mg only), and FD&C Red # 40/Allura Red Lake (80 mg only).</Description>
</NDC>
<NDC>
<NDCCode>21695-742-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (21695-742-90)</PackageDescription>
<NDC11Code>21695-0742-90</NDC11Code>
<ProductNDC>21695-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Simvastatin</ProprietaryName>
<NonProprietaryName>Simvastatin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076685</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>SIMVASTATIN</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC],Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Therapy with lipid-altering agents should be only one component of multiple risk factor intervention in individuals at significantly increased risk for atherosclerotic vascular disease due to hypercholesterolemia. Drug therapy is indicated as an adjunct to diet when the response to a diet restricted in saturated fat and cholesterol and other nonpharmacologic measures alone has been inadequate. In patients with coronary heart disease (CHD) or at high risk of CHD, simvastatin can be started simultaneously with diet. 1.1 Reductions in Risk of CHD Mortality and Cardiovascular Events. In patients at high risk of coronary events because of existing coronary heart disease, diabetes, peripheral vessel disease, history of stroke or other cerebrovascular disease, simvastatin tablets, USP are indicated to: 1 Reduce the risk of total mortality by reducing CHD deaths. , 2 Reduce the risk of non-fatal myocardial infarction and stroke. , 3 Reduce the need for coronary and non-coronary revascularization procedures. .</IndicationAndUsage>
<Description>Simvastatin is a lipid-lowering agent that is derived synthetically from a fermentation product of Aspergillus terreus. After oral ingestion, simvastatin, which is an inactive lactone, is hydrolyzed to the corresponding β-hydroxyacid form. This is an inhibitor of 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase. This enzyme catalyzes the conversion of HMG-CoA to mevalonate, which is an early and rate-limiting step in the biosynthesis of cholesterol. Simvastatin is butanoic acid, 2,2-dimethyl-,1,2,3,7,8,8a-hexahydro-3,7-dimethyl-8-[2-(tetrahydro-4-hydroxy-6-oxo-2. H. -pyran-2-yl)-ethyl]-1-naphthalenyl ester, [1. S. -[1α,3α,7β,8β(2. S*. ,4. S*. ),-8aβ]]. The empirical formula of simvastatin is C. 25. H. 38. O. 5. and its molecular weight is 418.57. Its structural formula is. Simvastatin is a white to off-white, nonhygroscopic, crystalline powder that is practically insoluble in water, and freely soluble in chloroform, methanol and ethanol. Simvastatin tablets, USP for oral administration contain either 5 mg, 10 mg, 20 mg, 40 mg or 80 mg of simvastatin and the following inactive ingredients: butylated hydroxyanisole, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, talc, ascorbic acid, citric acid, hypromellose, polydextrose FCC, polyethylene glycol, triacetin, iron oxide yellow (5 and 10 mg only), iron oxide red (10, 20, and 40 mg only), titanium dioxide (40 and 80 mg only), and FD&C Red # 40/Allura Red Lake (80 mg only).</Description>
</NDC>
<NDC>
<NDCCode>37205-742-62</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (37205-742-62) > 12 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>37205-0742-62</NDC11Code>
<ProductNDC>37205-742</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy</ProprietaryName>
<ProprietaryNameSuffix>Antihistamine</ProprietaryNameSuffix>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120830</StartMarketingDate>
<EndMarketingDate>20190630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part336</ApplicationNumber>
<LabelerName>Cardinal Health (Leader) 37205</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120830</StartMarketingDatePackage>
<EndMarketingDatePackage>20190630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>37205-742-78</NDCCode>
<PackageDescription>1 BOTTLE in 1 BOX (37205-742-78) > 100 CAPSULE in 1 BOTTLE</PackageDescription>
<NDC11Code>37205-0742-78</NDC11Code>
<ProductNDC>37205-742</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy</ProprietaryName>
<ProprietaryNameSuffix>Antihistamine</ProprietaryNameSuffix>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120830</StartMarketingDate>
<EndMarketingDate>20190630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part336</ApplicationNumber>
<LabelerName>Cardinal Health (Leader) 37205</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20120830</StartMarketingDatePackage>
<EndMarketingDatePackage>20190630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43353-742-60</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-60)</PackageDescription>
<NDC11Code>43353-0742-60</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-742-80</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-80)</PackageDescription>
<NDC11Code>43353-0742-80</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-742-92</NDCCode>
<PackageDescription>270 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-92)</PackageDescription>
<NDC11Code>43353-0742-92</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-742-94</NDCCode>
<PackageDescription>360 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-94)</PackageDescription>
<NDC11Code>43353-0742-94</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-742-96</NDCCode>
<PackageDescription>450 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-96)</PackageDescription>
<NDC11Code>43353-0742-96</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43353-742-98</NDCCode>
<PackageDescription>540 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-742-98)</PackageDescription>
<NDC11Code>43353-0742-98</NDC11Code>
<ProductNDC>43353-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA086242</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
<Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>46708-742-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (46708-742-30) </PackageDescription>
<NDC11Code>46708-0742-30</NDC11Code>
<ProductNDC>46708-742</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acitretin</ProprietaryName>
<NonProprietaryName>Acitretin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240808</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217774</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>ACITRETIN</SubstanceName>
<StrengthNumber>17.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Acitretin capsules are indicated for the treatment of severe psoriasis in adults. Because of significant adverse effects associated with its use, acitretin capsules should be prescribed only by those knowledgeable in the systemic use of retinoids. In females of reproductive potential, acitretin capsules should be reserved for non-pregnant patients who are unresponsive to other therapies or whose clinical condition contraindicates the use of other treatments (see boxed CONTRAINDICATIONS AND WARNINGS — acitretin capsules can cause severe birth defects). Most patients experience relapse of psoriasis after discontinuing therapy. Subsequent courses, when clinically indicated, have produced efficacy results similar to the initial course of therapy.</IndicationAndUsage>
<Description>Acitretin, USP a retinoid, is available in 10-mg, 17.5-mg, and 25-mg gelatin capsules for oral administration. Chemically, acitretin is all-trans-9-(4-methoxy-2,3,6-trimethylphenyl)-3,7-dimethyl-2,4,6,8-nonatetraenoic acid. It is a metabolite of etretinate and is related to both retinoic acid and retinol (vitamin A). It is a yellow to greenish-yellow crystalline powder with a molecular weight of 326.44. The structural formula is. Each capsule contains acitretin, microcrystalline cellulose, maltodextrin, sodium ascorbate, sodium lauryl sulfate, colloidal silicon dioxide and magnesium stearate. Gelatin capsule shells contain gelatin, iron oxide yellow, iron oxide red, titanium dioxide and sodium lauryl sulfate. Additionally, 10 mg and 25 mg gelatin capsule shells contains iron oxide black. The gelatin capsule shells are printed with edible black ink containing shellac, iron oxide black and potassium hydroxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>49348-742-36</NDCCode>
<PackageDescription>177 mL in 1 BOTTLE (49348-742-36)</PackageDescription>
<NDC11Code>49348-0742-36</NDC11Code>
<ProductNDC>49348-742</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sunmark Nite Time</ProprietaryName>
<ProprietaryNameSuffix>Cold And Flu</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen,dextromethorphan Hbr, Doxylamine Succinate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060428</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>McKesson</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE</SubstanceName>
<StrengthNumber>500; 15; 6.25</StrengthNumber>
<StrengthUnit>mg/15mL; mg/15mL; mg/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
</NDCList>