{
"NDC": [
{
"NDCCode": "58177-340-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-340-11)",
"NDC11Code": "58177-0340-11",
"ProductNDC": "58177-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077855",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-340-04",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (58177-340-04)",
"NDC11Code": "58177-0340-04",
"ProductNDC": "58177-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077855",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-340-09",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (58177-340-09)",
"NDC11Code": "58177-0340-09",
"ProductNDC": "58177-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077855",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-293-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-293-11)",
"NDC11Code": "58177-0293-11",
"ProductNDC": "58177-293",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"ProprietaryNameSuffix": "Extended-release",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20091101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077176",
"LabelerName": "Ethex Corporation",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "23.75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75 mg of metoprolol succinate equivalent 25 mg of metoprolol tartrate, USP. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. The USP Drug Release Test is pending."
},
{
"NDCCode": "58177-310-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-310-11)",
"NDC11Code": "58177-0310-11",
"ProductNDC": "58177-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20091203",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076733",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-320-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-320-11)",
"NDC11Code": "58177-0320-11",
"ProductNDC": "58177-320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076720",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-330-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-330-11)",
"NDC11Code": "58177-0330-11",
"ProductNDC": "58177-330",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20100422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076720",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "58177-368-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-368-11)",
"NDC11Code": "58177-0368-11",
"ProductNDC": "58177-368",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"ProprietaryNameSuffix": "Extended-release",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20091101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076640",
"LabelerName": "Ethex Corporation",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "90",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 95 and 190 mg of metoprolol succinate equivalent to 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. Does not comply with the dissolution test of the USP monograph for metoprolol succinate extended-release tablets."
},
{
"NDCCode": "58177-369-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-369-11)",
"NDC11Code": "58177-0369-11",
"ProductNDC": "58177-369",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"ProprietaryNameSuffix": "Extended-release",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20091101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077176",
"LabelerName": "Ethex Corporation",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "47.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 47.5 mg of metoprolol succinate equivalent to 50 mg of metoprolol tartrate, USP. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. The USP dissolution test is pending."
},
{
"NDCCode": "58177-380-11",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-380-11)",
"NDC11Code": "58177-0380-11",
"ProductNDC": "58177-380",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077855",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).",
"Description": "Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide."
},
{
"NDCCode": "10356-340-11",
"PackageDescription": "118 mL in 1 BOTTLE (10356-340-11) ",
"NDC11Code": "10356-0340-11",
"ProductNDC": "10356-340",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Eucerin Q10 Anti-wrinkle Sensitive Skin",
"NonProprietaryName": "Octinoxate, Octisalate, Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20010102",
"EndMarketingDate": "20230630",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Beiersdorf Inc",
"SubstanceName": "OCTINOXATE; OCTISALATE; OXYBENZONE",
"StrengthNumber": "7.5; 3; 3",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20010102",
"EndMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "13924-340-12",
"PackageDescription": "1 CONTAINER in 1 BOX (13924-340-12) / 1 PACKAGE in 1 CONTAINER (13924-340-11) / .5 kg in 1 PACKAGE (13924-340-10) ",
"NDC11Code": "13924-0340-12",
"ProductNDC": "13924-340",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Simethicone",
"DosageFormName": "LIQUID",
"StartMarketingDate": "20050511",
"EndMarketingDate": "20251115",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "NuSil Technology LLC",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "11-MAY-05",
"EndMarketingDatePackage": "15-NOV-25"
},
{
"NDCCode": "43744-340-11",
"PackageDescription": "5 g in 1 DRUM (43744-340-11)",
"NDC11Code": "43744-0340-11",
"ProductNDC": "43744-340",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Enalapril Maleate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20110707",
"EndMarketingDate": "20130624",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "CBSCHEM LIMITED",
"SubstanceName": "ENALAPRIL",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20130624"
},
{
"NDCCode": "50268-340-13",
"PackageDescription": "30 BLISTER PACK in 1 BOX (50268-340-13) > 1 TABLET in 1 BLISTER PACK (50268-340-11) ",
"NDC11Code": "50268-0340-13",
"ProductNDC": "50268-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluvoxamine Maleate",
"NonProprietaryName": "Fluvoxamine Maleate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075902",
"LabelerName": "AvPAK",
"SubstanceName": "FLUVOXAMINE MALEATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-04-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20210304",
"SamplePackage": "N"
},
{
"NDCCode": "55570-340-11",
"PackageDescription": "5 kg in 1 BOX (55570-340-11) ",
"NDC11Code": "55570-0340-11",
"ProductNDC": "55570-340",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Manganese Sulfate Monohydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20070328",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Jost Chemical Co.",
"SubstanceName": "MANGANESE SULFATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "28-MAR-07"
},
{
"NDCCode": "60687-340-01",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-340-01) / 1 TABLET, FILM COATED in 1 BLISTER PACK (60687-340-11) ",
"NDC11Code": "60687-0340-01",
"ProductNDC": "60687-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076143",
"LabelerName": "American Health Packaging",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180201",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion hydrochloride tablets in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)].",
"Description": "Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.21 g/mol. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white to off-white crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride is supplied for oral administration as 75-mg (orange) and 100-mg (purple) film-coated tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the following inactive ingredients. 75-mg tablet –colloidal silicon dioxide, crospovidone, FD&C Yellow #6 Aluminum Lake, fumaric acid granular, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide. 100-mg tablet –colloidal silicon dioxide, crospovidone, D&C Red #7 Calcium Lake, fumaric acid granular, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "62135-340-11",
"PackageDescription": "10 BOTTLE in 1 BOX (62135-340-11) / 15 g in 1 BOTTLE",
"NDC11Code": "62135-0340-11",
"ProductNDC": "62135-340",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Polystyrene Sulfonate",
"NonProprietaryName": "Sodium Polystyrene Sulfonate",
"DosageFormName": "POWDER, FOR SUSPENSION",
"RouteName": "ORAL; RECTAL",
"StartMarketingDate": "20160218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206815",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "SODIUM POLYSTYRENE SULFONATE",
"StrengthNumber": "4.1",
"StrengthUnit": "meq/g",
"Status": "Active",
"LastUpdate": "2023-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220720",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium polystyrene sulfonate is indicated for the treatment of hyperkalemia. Limitation of Use. Sodium Polystyrene Sulfonate should not be used as an emergency treatment for life-threatening hyperkalemia because of its delayed onset of action [see Clinical Pharmacology ( 12.2)].",
"Description": "Sodium polystyrene sulfonate is a benzene, diethenyl-polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown, fine, odorless powdered form of sodium polystyrene sulfonate, a cation-exchange resin prepared in the sodium phase with an in vitro exchange capacity of approximately 3.1 mEq ( in vivo approximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or rectally as an enema. One gram of sodium polystyrene sulfonate contains 4.1 mEq of sodium."
},
{
"NDCCode": "67645-340-04",
"PackageDescription": "1 BAG in 1 CARTON (67645-340-04) / 11.35 kg in 1 BAG (67645-340-03) ",
"NDC11Code": "67645-0340-04",
"ProductNDC": "67645-340",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Benzoyl Peroxide",
"DosageFormName": "POWDER",
"StartMarketingDate": "19971103",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Nouryon Chemicals, S.A. de C.V.",
"SubstanceName": "BENZOYL PEROXIDE",
"StrengthNumber": "75",
"StrengthUnit": "kg/100kg",
"Status": "Unfinished",
"LastUpdate": "2026-05-18",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "03-NOV-97"
},
{
"NDCCode": "68428-340-11",
"PackageDescription": "300 PELLET in 1 BOTTLE, GLASS (68428-340-11) ",
"NDC11Code": "68428-0340-11",
"ProductNDC": "68428-340",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Convallaria Majalis",
"NonProprietaryName": "Convallaria Majalis",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "CONVALLARIA MAJALIS",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "58177-910-05",
"PackageDescription": "240 mL in 1 BOTTLE (58177-910-05)",
"NDC11Code": "58177-0910-05",
"ProductNDC": "58177-910",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20040510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040364",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisolone syrup is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications prednisolone syrup is indicated for systemic dermatomyositis (polymyositis).",
"Description": "Prednisolone Syrup, USP contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)-. Prednisolone Syrup, USP contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, ethyl maltol, flavors, glycerin, ammoniated glycyrrhizin, propylene glycol, purified water, sodium saccharin, sucrose, FD&C blue #1 and FD&C red #40."
},
{
"NDCCode": "58177-910-07",
"PackageDescription": "480 mL in 1 BOTTLE (58177-910-07)",
"NDC11Code": "58177-0910-07",
"ProductNDC": "58177-910",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisolone",
"NonProprietaryName": "Prednisolone",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20040510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040364",
"LabelerName": "ETHEX Corporation",
"SubstanceName": "PREDNISOLONE",
"StrengthNumber": "15",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisolone syrup is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications prednisolone syrup is indicated for systemic dermatomyositis (polymyositis).",
"Description": "Prednisolone Syrup, USP contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)-. Prednisolone Syrup, USP contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, ethyl maltol, flavors, glycerin, ammoniated glycyrrhizin, propylene glycol, purified water, sodium saccharin, sucrose, FD&C blue #1 and FD&C red #40."
},
{
"NDCCode": "0245-0168-12",
"PackageDescription": "1 BOTTLE in 1 CARTON (0245-0168-12) > 340 g in 1 BOTTLE",
"NDC11Code": "00245-0168-12",
"ProductNDC": "0245-0168",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clenia",
"NonProprietaryName": "Sulfacetamide Sodium And Sulfur",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090901",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Upsher-Smith Laboratories, Inc",
"SubstanceName": "SULFACETAMIDE SODIUM; SULFUR",
"StrengthNumber": "100; 50",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Sulfonamide Antibacterial [EPC],Sulfonamides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-11-22"
},
{
"NDCCode": "0310-0900-30",
"PackageDescription": "1 POUCH in 1 CARTON (0310-0900-30) / 1 INHALER in 1 POUCH / 30 POWDER, METERED in 1 INHALER",
"NDC11Code": "00310-0900-30",
"ProductNDC": "0310-0900",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duaklir Pressair",
"NonProprietaryName": "Aclidinium Bromide And Formoterol Fumarate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220817",
"EndMarketingDate": "20250430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210595",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "ACLIDINIUM BROMIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "400; 12",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220817",
"EndMarketingDatePackage": "20240930",
"SamplePackage": "N",
"IndicationAndUsage": "DUAKLIR PRESSAIR is a combination of aclidinium bromide (an anticholinergic) and formoterol fumarate (a LABA) indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use: DUAKLIR PRESSAIR is not indicated for the relief of acute bronchospasm or for the treatment of asthma [see Warnings and Precautions (5.1, 5.4)].",
"Description": "DUAKLIR PRESSAIR consists of a dry powder formulation of aclidinium bromide and formoterol fumarate for oral inhalation only. Aclidinium bromide, is an anticholinergic with specificity for muscarinic receptors. Aclidinium bromide is a synthetic, quaternary ammonium compound, chemically described as 1-azoniabicyclo[2.2.2]octane, 3-[(hydroxydi-2-thienylacetyl)oxy]-1-(3-phenoxypropyl)-, bromide, (3R)-. The structural formula is. Aclidinium bromide is a white powder with a molecular formula of C26H30 NO4S2Br and a molecular mass of 564.56. It is very slightly soluble in water and ethanol and sparingly soluble in methanol. Formoterol fumarate, a racemate, is a selective beta2-adrenergic agonist. Its chemical name is (±)-2-hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1methylethyl]-amino]ethyl]formanilide fumarate dihydrate. The structural formula is. Formoterol fumarate (as a dihydrate) has a molecular weight of 840.91, and its molecular formula is (C19H24N2O4)2 C4H4O42H2O. Formoterol fumarate is a white to yellowish crystalline powder, which is freely soluble in glacial acetic acid, soluble in methanol, sparingly soluble in ethanol and isopropanol, slightly soluble in water, and practically insoluble in acetone, ethyl acetate, and diethyl ether. DUAKLIR PRESSAIR is a breath-actuated multi-dose dry powder inhaler. Each actuation of DUAKLIR PRESSAIR provides a metered dose of 12 mg of the formulation which contains lactose monohydrate (which may contain milk proteins) as the carrier, 400 mcg of aclidinium bromide (equivalent to 343 mcg of aclidinium), and 12.0 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.5 mcg of formoterol fumarate anhydrous and 9.8 mcg of formoterol). This results in delivery of 396 mcg of aclidinium bromide (equivalent to 340 mcg of aclidinium) and 11.8 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.3 mcg of formoterol fumarate anhydrous and 9.7 mcg of formoterol) from the mouthpiece, based on in vitro testing at an average flow rate of approximately 63 L/min with constant volume of 2 L. The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow rate and inspiratory time."
},
{
"NDCCode": "0310-0900-60",
"PackageDescription": "1 POUCH in 1 CARTON (0310-0900-60) / 1 INHALER in 1 POUCH / 60 POWDER, METERED in 1 INHALER",
"NDC11Code": "00310-0900-60",
"ProductNDC": "0310-0900",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duaklir Pressair",
"NonProprietaryName": "Aclidinium Bromide And Formoterol Fumarate",
"DosageFormName": "POWDER, METERED",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20220817",
"EndMarketingDate": "20250430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210595",
"LabelerName": "AstraZeneca Pharmaceuticals LP",
"SubstanceName": "ACLIDINIUM BROMIDE; FORMOTEROL FUMARATE",
"StrengthNumber": "400; 12",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220817",
"EndMarketingDatePackage": "20250430",
"SamplePackage": "N",
"IndicationAndUsage": "DUAKLIR PRESSAIR is a combination of aclidinium bromide (an anticholinergic) and formoterol fumarate (a LABA) indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use: DUAKLIR PRESSAIR is not indicated for the relief of acute bronchospasm or for the treatment of asthma [see Warnings and Precautions (5.1, 5.4)].",
"Description": "DUAKLIR PRESSAIR consists of a dry powder formulation of aclidinium bromide and formoterol fumarate for oral inhalation only. Aclidinium bromide, is an anticholinergic with specificity for muscarinic receptors. Aclidinium bromide is a synthetic, quaternary ammonium compound, chemically described as 1-azoniabicyclo[2.2.2]octane, 3-[(hydroxydi-2-thienylacetyl)oxy]-1-(3-phenoxypropyl)-, bromide, (3R)-. The structural formula is. Aclidinium bromide is a white powder with a molecular formula of C26H30 NO4S2Br and a molecular mass of 564.56. It is very slightly soluble in water and ethanol and sparingly soluble in methanol. Formoterol fumarate, a racemate, is a selective beta2-adrenergic agonist. Its chemical name is (±)-2-hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1methylethyl]-amino]ethyl]formanilide fumarate dihydrate. The structural formula is. Formoterol fumarate (as a dihydrate) has a molecular weight of 840.91, and its molecular formula is (C19H24N2O4)2 C4H4O42H2O. Formoterol fumarate is a white to yellowish crystalline powder, which is freely soluble in glacial acetic acid, soluble in methanol, sparingly soluble in ethanol and isopropanol, slightly soluble in water, and practically insoluble in acetone, ethyl acetate, and diethyl ether. DUAKLIR PRESSAIR is a breath-actuated multi-dose dry powder inhaler. Each actuation of DUAKLIR PRESSAIR provides a metered dose of 12 mg of the formulation which contains lactose monohydrate (which may contain milk proteins) as the carrier, 400 mcg of aclidinium bromide (equivalent to 343 mcg of aclidinium), and 12.0 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.5 mcg of formoterol fumarate anhydrous and 9.8 mcg of formoterol). This results in delivery of 396 mcg of aclidinium bromide (equivalent to 340 mcg of aclidinium) and 11.8 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.3 mcg of formoterol fumarate anhydrous and 9.7 mcg of formoterol) from the mouthpiece, based on in vitro testing at an average flow rate of approximately 63 L/min with constant volume of 2 L. The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow rate and inspiratory time."
},
{
"NDCCode": "0338-1103-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1103-04) ",
"NDC11Code": "00338-1103-04",
"ProductNDC": "0338-1103",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "365; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 25",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-11-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19970929",
"SamplePackage": "N"
},
{
"NDCCode": "0338-9540-05",
"PackageDescription": "15 BAG in 1 CARTON (0338-9540-05) / 100 mL in 1 BAG (0338-9540-01) ",
"NDC11Code": "00338-9540-05",
"ProductNDC": "0338-9540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinolipid",
"NonProprietaryName": "Olive Oil And Soybean Oil",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204508",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OLIVE OIL; SOYBEAN OIL",
"StrengthNumber": "16; 4",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160101",
"SamplePackage": "N",
"IndicationAndUsage": "CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-9540-06",
"PackageDescription": "10 BAG in 1 CARTON (0338-9540-06) / 250 mL in 1 BAG (0338-9540-02) ",
"NDC11Code": "00338-9540-06",
"ProductNDC": "0338-9540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinolipid",
"NonProprietaryName": "Olive Oil And Soybean Oil",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204508",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OLIVE OIL; SOYBEAN OIL",
"StrengthNumber": "16; 4",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160101",
"SamplePackage": "N",
"IndicationAndUsage": "CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-9540-07",
"PackageDescription": "12 BAG in 1 CARTON (0338-9540-07) / 500 mL in 1 BAG (0338-9540-03) ",
"NDC11Code": "00338-9540-07",
"ProductNDC": "0338-9540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinolipid",
"NonProprietaryName": "Olive Oil And Soybean Oil",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204508",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OLIVE OIL; SOYBEAN OIL",
"StrengthNumber": "16; 4",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160101",
"SamplePackage": "N",
"IndicationAndUsage": "CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-9540-08",
"PackageDescription": "6 BAG in 1 CARTON (0338-9540-08) / 1000 mL in 1 BAG (0338-9540-04) ",
"NDC11Code": "00338-9540-08",
"ProductNDC": "0338-9540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinolipid",
"NonProprietaryName": "Olive Oil And Soybean Oil",
"DosageFormName": "INJECTION, EMULSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204508",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "OLIVE OIL; SOYBEAN OIL",
"StrengthNumber": "16; 4",
"StrengthUnit": "g/100mL; g/100mL",
"Pharm_Classes": "Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160101",
"SamplePackage": "N",
"IndicationAndUsage": "CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.",
"Description": "CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "10812-340-01",
"PackageDescription": "3.4 g in 1 TUBE (10812-340-01) ",
"NDC11Code": "10812-0340-01",
"ProductNDC": "10812-340",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Neutrogena Moistureshine Spf20",
"ProprietaryNameSuffix": "Pinch Of Cinn 260",
"NonProprietaryName": "Octinoxate, Octisalate, And Titanium Dioxide",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100215",
"EndMarketingDate": "20231201",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Johnson & Johnson Consumer Inc.",
"SubstanceName": "OCTINOXATE; OCTISALATE; TITANIUM DIOXIDE",
"StrengthNumber": "50; 25; 11",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2023-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20100215",
"EndMarketingDatePackage": "20231201",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>58177-340-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-340-11)</PackageDescription>
<NDC11Code>58177-0340-11</NDC11Code>
<ProductNDC>58177-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077855</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-340-04</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (58177-340-04)</PackageDescription>
<NDC11Code>58177-0340-04</NDC11Code>
<ProductNDC>58177-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077855</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-340-09</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (58177-340-09)</PackageDescription>
<NDC11Code>58177-0340-09</NDC11Code>
<ProductNDC>58177-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077855</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-293-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-293-11)</PackageDescription>
<NDC11Code>58177-0293-11</NDC11Code>
<ProductNDC>58177-293</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077176</ApplicationNumber>
<LabelerName>Ethex Corporation</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>23.75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 23.75 mg of metoprolol succinate equivalent 25 mg of metoprolol tartrate, USP. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. The USP Drug Release Test is pending.</Description>
</NDC>
<NDC>
<NDCCode>58177-310-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-310-11)</PackageDescription>
<NDC11Code>58177-0310-11</NDC11Code>
<ProductNDC>58177-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091203</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076733</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-320-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-320-11)</PackageDescription>
<NDC11Code>58177-0320-11</NDC11Code>
<ProductNDC>58177-320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076720</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-330-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-330-11)</PackageDescription>
<NDC11Code>58177-0330-11</NDC11Code>
<ProductNDC>58177-330</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076720</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>58177-368-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-368-11)</PackageDescription>
<NDC11Code>58177-0368-11</NDC11Code>
<ProductNDC>58177-368</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076640</ApplicationNumber>
<LabelerName>Ethex Corporation</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>90</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 95 and 190 mg of metoprolol succinate equivalent to 100 and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. Does not comply with the dissolution test of the USP monograph for metoprolol succinate extended-release tablets.</Description>
</NDC>
<NDC>
<NDCCode>58177-369-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-369-11)</PackageDescription>
<NDC11Code>58177-0369-11</NDC11Code>
<ProductNDC>58177-369</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077176</ApplicationNumber>
<LabelerName>Ethex Corporation</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>47.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Metoprolol succinate extended-release tablets are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Metoprolol succinate is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release tablets. Metoprolol succinate extended-release tablets have been formulated to provide a controlled and predictable release of metoprolol for once daily oral administration. The tablets comprise a multiple unit system containing metoprolol succinate in a multitude of controlled-release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The tablets contain 47.5 mg of metoprolol succinate equivalent to 50 mg of metoprolol tartrate, USP. Its chemical name is (±) 1-(isopropylamino)-3-[p-(2-methoxyethyl) phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is:. Metoprolol succinate is a white crystalline powder with a molecular weight of 652.8. It is freely soluble in water; soluble in methanol; sparingly soluble in ethanol; slightly soluble in dichloromethane and 2-propanol; practically insoluble in ethyl-acetate, acetone, diethylether and heptane. Inactive ingredients: calcium stearate, carboxymethylcellulose sodium, carnauba wax, croscarmellose sodium, glyceryl behenate, hydrogenated vegetable oil, hypromellose, maltodextrin, methacrylic acid copolymer, microcrystalline cellulose, polydextrose, polyethylene glycol, povidone, sodium stearyl fumarate, titanium dioxide, triacetin, triethyl citrate, vinyl acetate copolymer. The USP dissolution test is pending.</Description>
</NDC>
<NDC>
<NDCCode>58177-380-11</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (58177-380-11)</PackageDescription>
<NDC11Code>58177-0380-11</NDC11Code>
<ProductNDC>58177-380</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077855</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Morphine sulfate extended-release tablets are a controlled-release oral formulation of morphine sulfate indicated for the management of moderate to severe pain when a continuous, around-the-clock opioid analgesic is needed for an extended period of time. Morphine sulfate extended-release tablets are NOT intended for use as a prn analgesic. Morphine sulfate extended-release 100 mg and 200 mg tablet strengths are high dose, controlled-release, oral morphine formulations indicated for the relief of pain in opioid-tolerant patients only. Morphine sulfate extended-release tablets are not indicated for pain in the immediate postoperative period (the first 12 to 24 hours following surgery) for patients not previously taking the drug, because its safety in this setting has not been established. Morphine sulfate extended-release tablets are not indicated for pain in the postoperative period if the pain is mild, or not expected to persist for an extended period of time. Morphine sulfate extended-release tablets are only indicated for postoperative use if the patient is already receiving the drug prior to surgery or if the postoperative pain is expected to be moderate to severe and persist for an extended period of time. Physicians should individualize treatment, moving from parenteral to oral analgesics as appropriate (see American Pain Society guidelines).</IndicationAndUsage>
<Description>Chemically, morphine sulfate is 7,8-didehydro-4,5α-epoxy-17-methylmorphinan-3,6α-diol sulfate (2:1) (salt) pentahydrate and has the following structural formula. Morphine sulfate extended-release tablets are opiate analgesics supplied in 15 mg, 30 mg, 60 mg, 100 mg and 200 mg tablet strengths. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate, USP). Morphine sulfate extended-release tablets 15 mg, 30 mg, 60 mg, 100 mg and 200 mg contain the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, polyethylene glycol, stearic acid, and titanium dioxide. The 15 mg tablet also contains: D&C yellow #10 aluminum lake, FD&C blue #1 aluminum lake, hydrated alumina and polysorbate. The 30 mg tablet also contains: D&C red #27/phloxine aluminum lake, FD&C blue #1/FCD aluminum lake, lactose anhydrous and polysorbate. The 60 mg tablet also contains: lactose anhydrous and polysorbate. The 100 mg tablet also contains: black iron oxide, lactose monohydrate and polysorbate 80. The 200 mg tablet also contains: black iron oxide, lactose monohydrate, red iron oxide and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>10356-340-11</NDCCode>
<PackageDescription>118 mL in 1 BOTTLE (10356-340-11) </PackageDescription>
<NDC11Code>10356-0340-11</NDC11Code>
<ProductNDC>10356-340</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Eucerin Q10 Anti-wrinkle Sensitive Skin</ProprietaryName>
<NonProprietaryName>Octinoxate, Octisalate, Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20010102</StartMarketingDate>
<EndMarketingDate>20230630</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Beiersdorf Inc</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; OXYBENZONE</SubstanceName>
<StrengthNumber>7.5; 3; 3</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20010102</StartMarketingDatePackage>
<EndMarketingDatePackage>20230630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>13924-340-12</NDCCode>
<PackageDescription>1 CONTAINER in 1 BOX (13924-340-12) / 1 PACKAGE in 1 CONTAINER (13924-340-11) / .5 kg in 1 PACKAGE (13924-340-10) </PackageDescription>
<NDC11Code>13924-0340-12</NDC11Code>
<ProductNDC>13924-340</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<StartMarketingDate>20050511</StartMarketingDate>
<EndMarketingDate>20251115</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>NuSil Technology LLC</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>11-MAY-05</StartMarketingDatePackage>
<EndMarketingDatePackage>15-NOV-25</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>43744-340-11</NDCCode>
<PackageDescription>5 g in 1 DRUM (43744-340-11)</PackageDescription>
<NDC11Code>43744-0340-11</NDC11Code>
<ProductNDC>43744-340</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Enalapril Maleate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20110707</StartMarketingDate>
<EndMarketingDate>20130624</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>CBSCHEM LIMITED</LabelerName>
<SubstanceName>ENALAPRIL</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50268-340-13</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 BOX (50268-340-13) > 1 TABLET in 1 BLISTER PACK (50268-340-11) </PackageDescription>
<NDC11Code>50268-0340-13</NDC11Code>
<ProductNDC>50268-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluvoxamine Maleate</ProprietaryName>
<NonProprietaryName>Fluvoxamine Maleate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075902</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>FLUVOXAMINE MALEATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-04-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55570-340-11</NDCCode>
<PackageDescription>5 kg in 1 BOX (55570-340-11) </PackageDescription>
<NDC11Code>55570-0340-11</NDC11Code>
<ProductNDC>55570-340</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Manganese Sulfate Monohydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20070328</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Jost Chemical Co.</LabelerName>
<SubstanceName>MANGANESE SULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>28-MAR-07</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>60687-340-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (60687-340-01) / 1 TABLET, FILM COATED in 1 BLISTER PACK (60687-340-11) </PackageDescription>
<NDC11Code>60687-0340-01</NDC11Code>
<ProductNDC>60687-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076143</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride tablets are indicated for the treatment of major depressive disorder (MDD), as defined by the Diagnostic and Statistical Manual (DSM). The efficacy of bupropion hydrochloride tablets in the treatment of a major depressive episode was established in two 4-week controlled inpatient trials and one 6-week controlled outpatient trial of adult subjects with MDD [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Bupropion hydrochloride, an antidepressant of the aminoketone class, is chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.21 g/mol. The molecular formula is C 13H 18ClNOHCl. Bupropion hydrochloride powder is white to off-white crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is:. Bupropion hydrochloride is supplied for oral administration as 75-mg (orange) and 100-mg (purple) film-coated tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the following inactive ingredients. 75-mg tablet –colloidal silicon dioxide, crospovidone, FD&C Yellow #6 Aluminum Lake, fumaric acid granular, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide. 100-mg tablet –colloidal silicon dioxide, crospovidone, D&C Red #7 Calcium Lake, fumaric acid granular, hydroxypropyl cellulose, hypromellose, magnesium stearate, methylcellulose, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62135-340-11</NDCCode>
<PackageDescription>10 BOTTLE in 1 BOX (62135-340-11) / 15 g in 1 BOTTLE</PackageDescription>
<NDC11Code>62135-0340-11</NDC11Code>
<ProductNDC>62135-340</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Polystyrene Sulfonate</ProprietaryName>
<NonProprietaryName>Sodium Polystyrene Sulfonate</NonProprietaryName>
<DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL; RECTAL</RouteName>
<StartMarketingDate>20160218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206815</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>SODIUM POLYSTYRENE SULFONATE</SubstanceName>
<StrengthNumber>4.1</StrengthNumber>
<StrengthUnit>meq/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium polystyrene sulfonate is indicated for the treatment of hyperkalemia. Limitation of Use. Sodium Polystyrene Sulfonate should not be used as an emergency treatment for life-threatening hyperkalemia because of its delayed onset of action [see Clinical Pharmacology ( 12.2)].</IndicationAndUsage>
<Description>Sodium polystyrene sulfonate is a benzene, diethenyl-polymer, with ethenylbenzene, sulfonated, sodium salt and has the following structural formula. The drug is a golden brown, fine, odorless powdered form of sodium polystyrene sulfonate, a cation-exchange resin prepared in the sodium phase with an in vitro exchange capacity of approximately 3.1 mEq ( in vivo approximately 1 mEq) of potassium per gram. The sodium content is approximately 100 mg (4.1 mEq) per gram of the drug. It can be administered orally or rectally as an enema. One gram of sodium polystyrene sulfonate contains 4.1 mEq of sodium.</Description>
</NDC>
<NDC>
<NDCCode>67645-340-04</NDCCode>
<PackageDescription>1 BAG in 1 CARTON (67645-340-04) / 11.35 kg in 1 BAG (67645-340-03) </PackageDescription>
<NDC11Code>67645-0340-04</NDC11Code>
<ProductNDC>67645-340</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Benzoyl Peroxide</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>19971103</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Nouryon Chemicals, S.A. de C.V.</LabelerName>
<SubstanceName>BENZOYL PEROXIDE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>kg/100kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-05-18</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>03-NOV-97</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>68428-340-11</NDCCode>
<PackageDescription>300 PELLET in 1 BOTTLE, GLASS (68428-340-11) </PackageDescription>
<NDC11Code>68428-0340-11</NDC11Code>
<ProductNDC>68428-340</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Convallaria Majalis</ProprietaryName>
<NonProprietaryName>Convallaria Majalis</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>CONVALLARIA MAJALIS</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58177-910-05</NDCCode>
<PackageDescription>240 mL in 1 BOTTLE (58177-910-05)</PackageDescription>
<NDC11Code>58177-0910-05</NDC11Code>
<ProductNDC>58177-910</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040364</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisolone syrup is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications prednisolone syrup is indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
<Description>Prednisolone Syrup, USP contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)-. Prednisolone Syrup, USP contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, ethyl maltol, flavors, glycerin, ammoniated glycyrrhizin, propylene glycol, purified water, sodium saccharin, sucrose, FD&C blue #1 and FD&C red #40.</Description>
</NDC>
<NDC>
<NDCCode>58177-910-07</NDCCode>
<PackageDescription>480 mL in 1 BOTTLE (58177-910-07)</PackageDescription>
<NDC11Code>58177-0910-07</NDC11Code>
<ProductNDC>58177-910</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisolone</ProprietaryName>
<NonProprietaryName>Prednisolone</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040364</ApplicationNumber>
<LabelerName>ETHEX Corporation</LabelerName>
<SubstanceName>PREDNISOLONE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisolone syrup is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia. Nonsuppurative thyroiditis. Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). Ankylosing spondylitis. Acute and subacute bursitis. Acute nonspecific tenosynovitis. Acute gouty arthritis. Post-traumatic osteoarthritis. Synovitis of osteoarthritis. Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus. Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus. Bullous dermatitis herpetiformis. Severe erythema multiforme. (Stevens-Johnson syndrome). Exfoliative dermatitis. Mycosis fungoides. Severe psoriasis. Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis. Bronchial asthma. Contact dermatitis. Atopic dermatitis. Serum sickness. Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers. Herpes zoster ophthalmicus. Anterior segment inflammation. Diffuse posterior uveitis and choroiditis. Sympathetic ophthalmia. Allergic conjunctivitis. Keratitis. Chorioretinitis. Optic neuritis. Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis. Loeffler’s syndrome not manageable by other means. Berylliosis. Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults. Secondary thrombocytopenia in adults. Acquired (autoimmune) hemolytic anemia. Erythroblastopenia (RBC anemia). Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults. Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis. Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications prednisolone syrup is indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
<Description>Prednisolone Syrup, USP contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol; slightly soluble in chloroform. The chemical name for Prednisolone is Pregna- 1,4-diene-3,20-dione,11,17,21- trihydroxy-,(11β)-. Prednisolone Syrup, USP contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains alcohol 5%, citric acid, edetate disodium, ethyl maltol, flavors, glycerin, ammoniated glycyrrhizin, propylene glycol, purified water, sodium saccharin, sucrose, FD&C blue #1 and FD&C red #40.</Description>
</NDC>
<NDC>
<NDCCode>0245-0168-12</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0245-0168-12) > 340 g in 1 BOTTLE</PackageDescription>
<NDC11Code>00245-0168-12</NDC11Code>
<ProductNDC>0245-0168</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clenia</ProprietaryName>
<NonProprietaryName>Sulfacetamide Sodium And Sulfur</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090901</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Upsher-Smith Laboratories, Inc</LabelerName>
<SubstanceName>SULFACETAMIDE SODIUM; SULFUR</SubstanceName>
<StrengthNumber>100; 50</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Sulfonamide Antibacterial [EPC],Sulfonamides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>0310-0900-30</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0310-0900-30) / 1 INHALER in 1 POUCH / 30 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>00310-0900-30</NDC11Code>
<ProductNDC>0310-0900</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duaklir Pressair</ProprietaryName>
<NonProprietaryName>Aclidinium Bromide And Formoterol Fumarate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220817</StartMarketingDate>
<EndMarketingDate>20250430</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210595</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>ACLIDINIUM BROMIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>400; 12</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220817</StartMarketingDatePackage>
<EndMarketingDatePackage>20240930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DUAKLIR PRESSAIR is a combination of aclidinium bromide (an anticholinergic) and formoterol fumarate (a LABA) indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use: DUAKLIR PRESSAIR is not indicated for the relief of acute bronchospasm or for the treatment of asthma [see Warnings and Precautions (5.1, 5.4)].</IndicationAndUsage>
<Description>DUAKLIR PRESSAIR consists of a dry powder formulation of aclidinium bromide and formoterol fumarate for oral inhalation only. Aclidinium bromide, is an anticholinergic with specificity for muscarinic receptors. Aclidinium bromide is a synthetic, quaternary ammonium compound, chemically described as 1-azoniabicyclo[2.2.2]octane, 3-[(hydroxydi-2-thienylacetyl)oxy]-1-(3-phenoxypropyl)-, bromide, (3R)-. The structural formula is. Aclidinium bromide is a white powder with a molecular formula of C26H30 NO4S2Br and a molecular mass of 564.56. It is very slightly soluble in water and ethanol and sparingly soluble in methanol. Formoterol fumarate, a racemate, is a selective beta2-adrenergic agonist. Its chemical name is (±)-2-hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1methylethyl]-amino]ethyl]formanilide fumarate dihydrate. The structural formula is. Formoterol fumarate (as a dihydrate) has a molecular weight of 840.91, and its molecular formula is (C19H24N2O4)2 C4H4O42H2O. Formoterol fumarate is a white to yellowish crystalline powder, which is freely soluble in glacial acetic acid, soluble in methanol, sparingly soluble in ethanol and isopropanol, slightly soluble in water, and practically insoluble in acetone, ethyl acetate, and diethyl ether. DUAKLIR PRESSAIR is a breath-actuated multi-dose dry powder inhaler. Each actuation of DUAKLIR PRESSAIR provides a metered dose of 12 mg of the formulation which contains lactose monohydrate (which may contain milk proteins) as the carrier, 400 mcg of aclidinium bromide (equivalent to 343 mcg of aclidinium), and 12.0 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.5 mcg of formoterol fumarate anhydrous and 9.8 mcg of formoterol). This results in delivery of 396 mcg of aclidinium bromide (equivalent to 340 mcg of aclidinium) and 11.8 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.3 mcg of formoterol fumarate anhydrous and 9.7 mcg of formoterol) from the mouthpiece, based on in vitro testing at an average flow rate of approximately 63 L/min with constant volume of 2 L. The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow rate and inspiratory time.</Description>
</NDC>
<NDC>
<NDCCode>0310-0900-60</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0310-0900-60) / 1 INHALER in 1 POUCH / 60 POWDER, METERED in 1 INHALER</PackageDescription>
<NDC11Code>00310-0900-60</NDC11Code>
<ProductNDC>0310-0900</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duaklir Pressair</ProprietaryName>
<NonProprietaryName>Aclidinium Bromide And Formoterol Fumarate</NonProprietaryName>
<DosageFormName>POWDER, METERED</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20220817</StartMarketingDate>
<EndMarketingDate>20250430</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210595</ApplicationNumber>
<LabelerName>AstraZeneca Pharmaceuticals LP</LabelerName>
<SubstanceName>ACLIDINIUM BROMIDE; FORMOTEROL FUMARATE</SubstanceName>
<StrengthNumber>400; 12</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220817</StartMarketingDatePackage>
<EndMarketingDatePackage>20250430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DUAKLIR PRESSAIR is a combination of aclidinium bromide (an anticholinergic) and formoterol fumarate (a LABA) indicated for the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). Limitations of Use: DUAKLIR PRESSAIR is not indicated for the relief of acute bronchospasm or for the treatment of asthma [see Warnings and Precautions (5.1, 5.4)].</IndicationAndUsage>
<Description>DUAKLIR PRESSAIR consists of a dry powder formulation of aclidinium bromide and formoterol fumarate for oral inhalation only. Aclidinium bromide, is an anticholinergic with specificity for muscarinic receptors. Aclidinium bromide is a synthetic, quaternary ammonium compound, chemically described as 1-azoniabicyclo[2.2.2]octane, 3-[(hydroxydi-2-thienylacetyl)oxy]-1-(3-phenoxypropyl)-, bromide, (3R)-. The structural formula is. Aclidinium bromide is a white powder with a molecular formula of C26H30 NO4S2Br and a molecular mass of 564.56. It is very slightly soluble in water and ethanol and sparingly soluble in methanol. Formoterol fumarate, a racemate, is a selective beta2-adrenergic agonist. Its chemical name is (±)-2-hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1methylethyl]-amino]ethyl]formanilide fumarate dihydrate. The structural formula is. Formoterol fumarate (as a dihydrate) has a molecular weight of 840.91, and its molecular formula is (C19H24N2O4)2 C4H4O42H2O. Formoterol fumarate is a white to yellowish crystalline powder, which is freely soluble in glacial acetic acid, soluble in methanol, sparingly soluble in ethanol and isopropanol, slightly soluble in water, and practically insoluble in acetone, ethyl acetate, and diethyl ether. DUAKLIR PRESSAIR is a breath-actuated multi-dose dry powder inhaler. Each actuation of DUAKLIR PRESSAIR provides a metered dose of 12 mg of the formulation which contains lactose monohydrate (which may contain milk proteins) as the carrier, 400 mcg of aclidinium bromide (equivalent to 343 mcg of aclidinium), and 12.0 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.5 mcg of formoterol fumarate anhydrous and 9.8 mcg of formoterol). This results in delivery of 396 mcg of aclidinium bromide (equivalent to 340 mcg of aclidinium) and 11.8 mcg of formoterol fumarate (as a dihydrate, equivalent to 11.3 mcg of formoterol fumarate anhydrous and 9.7 mcg of formoterol) from the mouthpiece, based on in vitro testing at an average flow rate of approximately 63 L/min with constant volume of 2 L. The amount of drug delivered to the lungs will vary depending on patient factors such as inspiratory flow rate and inspiratory time.</Description>
</NDC>
<NDC>
<NDCCode>0338-1103-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1103-04) </PackageDescription>
<NDC11Code>00338-1103-04</NDC11Code>
<ProductNDC>0338-1103</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 25</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0338-9540-05</NDCCode>
<PackageDescription>15 BAG in 1 CARTON (0338-9540-05) / 100 mL in 1 BAG (0338-9540-01) </PackageDescription>
<NDC11Code>00338-9540-05</NDC11Code>
<ProductNDC>0338-9540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinolipid</ProprietaryName>
<NonProprietaryName>Olive Oil And Soybean Oil</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204508</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OLIVE OIL; SOYBEAN OIL</SubstanceName>
<StrengthNumber>16; 4</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-9540-06</NDCCode>
<PackageDescription>10 BAG in 1 CARTON (0338-9540-06) / 250 mL in 1 BAG (0338-9540-02) </PackageDescription>
<NDC11Code>00338-9540-06</NDC11Code>
<ProductNDC>0338-9540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinolipid</ProprietaryName>
<NonProprietaryName>Olive Oil And Soybean Oil</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204508</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OLIVE OIL; SOYBEAN OIL</SubstanceName>
<StrengthNumber>16; 4</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-9540-07</NDCCode>
<PackageDescription>12 BAG in 1 CARTON (0338-9540-07) / 500 mL in 1 BAG (0338-9540-03) </PackageDescription>
<NDC11Code>00338-9540-07</NDC11Code>
<ProductNDC>0338-9540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinolipid</ProprietaryName>
<NonProprietaryName>Olive Oil And Soybean Oil</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204508</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OLIVE OIL; SOYBEAN OIL</SubstanceName>
<StrengthNumber>16; 4</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-9540-08</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0338-9540-08) / 1000 mL in 1 BAG (0338-9540-04) </PackageDescription>
<NDC11Code>00338-9540-08</NDC11Code>
<ProductNDC>0338-9540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinolipid</ProprietaryName>
<NonProprietaryName>Olive Oil And Soybean Oil</NonProprietaryName>
<DosageFormName>INJECTION, EMULSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204508</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>OLIVE OIL; SOYBEAN OIL</SubstanceName>
<StrengthNumber>16; 4</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Lipid Emulsion [EPC], Lipid Emulsion [EPC], Lipids [CS], Lipids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINOLIPID is indicated in adults and pediatric patients, including term and preterm neonates, as a source of calories and essential fatty acids for parenteral nutrition (PN) when oral or enteral nutrition is not possible, insufficient, or contraindicated.</IndicationAndUsage>
<Description>CLINOLIPID lipid injectable emulsion, USP is a sterile, non-pyrogenic, homogenous, white, milky lipid emulsion for intravenous infusion. The lipid content of CLINOLIPID is 0.2 g/mL and comprises a mixture of refined olive oil and refined soybean oil in an approximate ratio of 4:1 (olive:soy). The mean concentration of linoleic acid (an omega-6 essential fatty acid) is 35.8 mg/mL (range 27.6 to 44.0 mg/mL) and α-linolenic acid (an omega-3 essential fatty acid) is 4.7 mg/mL (range 1.0 to 8.4 mg/mL). The phospholipids provide 470 milligrams or 15 mmol of phosphorus per liter. The total energy content, including fat, phospholipids and glycerin is 2000 kcal/L. Each 100 mL of CLINOLIPID 20% contains approximately 16 g of Olive Oil NF and 4 g of Soybean Oil USP, 1.2 g Egg Phospholipids NF, 2.25 g Glycerin USP, 0.03 g Sodium Oleate, and Water for Injection USP. Sodium Hydroxide NF for pH adjustment, pH: 6.0 to 9.0. The olive and soybean oils are refined natural products consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure. The major component fatty acids are linoleic (13.8 to 22.0%), oleic (44.3 to 79.5%), palmitic (7.6 to 19.3%), linolenic (0.5 to 4.2%), palmitoleic (0.0 to 3.2%) and stearic (0.7 to 5.0%). These fatty acids have the following chemical and structural formulas. CLINOLIPID has an osmolality of approximately 340 mOsmol/kg water (which represents an osmolarity of 260 mOsmol/liter of emulsion). CLINOLIPID contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>10812-340-01</NDCCode>
<PackageDescription>3.4 g in 1 TUBE (10812-340-01) </PackageDescription>
<NDC11Code>10812-0340-01</NDC11Code>
<ProductNDC>10812-340</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Neutrogena Moistureshine Spf20</ProprietaryName>
<ProprietaryNameSuffix>Pinch Of Cinn 260</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Octisalate, And Titanium Dioxide</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100215</StartMarketingDate>
<EndMarketingDate>20231201</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Johnson & Johnson Consumer Inc.</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>50; 25; 11</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20100215</StartMarketingDatePackage>
<EndMarketingDatePackage>20231201</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>