{
"NDC": [
{
"NDCCode": "58181-5200-1",
"PackageDescription": "1 BOTTLE, GLASS in 1 PACKAGE (58181-5200-1) / 250 mL in 1 BOTTLE, GLASS",
"NDC11Code": "58181-5200-01",
"ProductNDC": "58181-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevoflurane",
"NonProprietaryName": "Sevoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20240221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214382",
"LabelerName": "NextSource Pharma",
"SubstanceName": "SEVOFLURANE",
"StrengthNumber": "1",
"StrengthUnit": "mL/mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240221",
"SamplePackage": "N",
"IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
"Description": "Sevoflurane USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2absorbents (e.g., Baralyme ®and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2absorbents (especially with potassium hydroxide containing absorbents e.g. Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2and Compound A production is illustrated in the following in vitrosimulation where CO 2was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
},
{
"NDCCode": "58181-3030-5",
"PackageDescription": "5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3030-5)",
"NDC11Code": "58181-3030-05",
"ProductNDC": "58181-3030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140729",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
},
{
"NDCCode": "58181-3031-5",
"PackageDescription": "5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3031-5)",
"NDC11Code": "58181-3031-05",
"ProductNDC": "58181-3031",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140729",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
},
{
"NDCCode": "58181-3032-5",
"PackageDescription": "5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3032-5)",
"NDC11Code": "58181-3032-05",
"ProductNDC": "58181-3032",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lomustine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140729",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
},
{
"NDCCode": "58181-3040-5",
"PackageDescription": "1 BOTTLE in 1 CARTON (58181-3040-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "58181-3040-05",
"ProductNDC": "58181-3040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gleostine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140818",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140818",
"SamplePackage": "N",
"IndicationAndUsage": "Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .",
"Description": "Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2."
},
{
"NDCCode": "58181-3041-5",
"PackageDescription": "1 BOTTLE in 1 CARTON (58181-3041-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "58181-3041-05",
"ProductNDC": "58181-3041",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gleostine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140818",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140818",
"SamplePackage": "N",
"IndicationAndUsage": "Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .",
"Description": "Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2."
},
{
"NDCCode": "58181-3042-5",
"PackageDescription": "1 BOTTLE in 1 CARTON (58181-3042-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "58181-3042-05",
"ProductNDC": "58181-3042",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gleostine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140818",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-03-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140818",
"SamplePackage": "N",
"IndicationAndUsage": "Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .",
"Description": "Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2."
},
{
"NDCCode": "58181-3043-5",
"PackageDescription": "1 BOTTLE in 1 CARTON (58181-3043-5) > 5 CAPSULE, GELATIN COATED in 1 BOTTLE",
"NDC11Code": "58181-3043-05",
"ProductNDC": "58181-3043",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Gleostine",
"NonProprietaryName": "Lomustine",
"DosageFormName": "CAPSULE, GELATIN COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151105",
"EndMarketingDate": "20180630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017588",
"LabelerName": "NextSource Biotechnology, LLC",
"SubstanceName": "LOMUSTINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA],Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20151105",
"EndMarketingDatePackage": "20180630",
"SamplePackage": "N"
},
{
"NDCCode": "58181-4102-5",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (58181-4102-5) ",
"NDC11Code": "58181-4102-05",
"ProductNDC": "58181-4102",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218282",
"LabelerName": "NextSource Pharma",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Cyclophosphamide, USP is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2P H 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline and ethanol. Each capsule for oral administration contains 25 mg or 50 mg cyclophosphamide (anhydrous, USP) and the following inactive ingredients: Starch 1500 and sodium stearyl fumarate. Each gelatin capsule shell contains FD&C Blue #1, FD&C Red #3, gelatin and titanium dioxide. In addition to the ingredients listed above, each capsule contains Opacode (Black) monogramming ink. Opacode (Black) contains Ferrosoferric oxide-black, propylene glycol and shellac. FDA approved dissolution test method differs from USP."
},
{
"NDCCode": "58181-4115-0",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (58181-4115-0) ",
"NDC11Code": "58181-4115-00",
"ProductNDC": "58181-4115",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclophosphamide",
"NonProprietaryName": "Cyclophosphamide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218282",
"LabelerName": "NextSource Pharma",
"SubstanceName": "CYCLOPHOSPHAMIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"Description": "Cyclophosphamide, USP is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2P H 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline and ethanol. Each capsule for oral administration contains 25 mg or 50 mg cyclophosphamide (anhydrous, USP) and the following inactive ingredients: Starch 1500 and sodium stearyl fumarate. Each gelatin capsule shell contains FD&C Blue #1, FD&C Red #3, gelatin and titanium dioxide. In addition to the ingredients listed above, each capsule contains Opacode (Black) monogramming ink. Opacode (Black) contains Ferrosoferric oxide-black, propylene glycol and shellac. FDA approved dissolution test method differs from USP."
},
{
"NDCCode": "58181-4321-4",
"PackageDescription": "14 POUCH in 1 CARTON (58181-4321-4) / 1 CAPSULE in 1 POUCH",
"NDC11Code": "58181-4321-04",
"ProductNDC": "58181-4321",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203898",
"LabelerName": "NextSource Biotechnology LLC",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250401",
"SamplePackage": "N"
},
{
"NDCCode": "58181-4331-4",
"PackageDescription": "14 POUCH in 1 CARTON (58181-4331-4) / 1 CAPSULE in 1 POUCH",
"NDC11Code": "58181-4331-04",
"ProductNDC": "58181-4331",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203898",
"LabelerName": "NextSource Biotechnology LLC",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "140",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250401",
"SamplePackage": "N"
},
{
"NDCCode": "58181-4341-4",
"PackageDescription": "14 POUCH in 1 CARTON (58181-4341-4) / 1 CAPSULE in 1 POUCH",
"NDC11Code": "58181-4341-04",
"ProductNDC": "58181-4341",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203898",
"LabelerName": "NextSource Biotechnology LLC",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250401",
"SamplePackage": "N"
},
{
"NDCCode": "58181-4351-4",
"PackageDescription": "5 POUCH in 1 CARTON (58181-4351-4) / 1 CAPSULE in 1 POUCH",
"NDC11Code": "58181-4351-04",
"ProductNDC": "58181-4351",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203898",
"LabelerName": "NextSource Biotechnology LLC",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-07-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250401",
"SamplePackage": "N"
},
{
"NDCCode": "58181-7010-1",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 BOX (58181-7010-1) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "58181-7010-01",
"ProductNDC": "58181-7010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hcl",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212821",
"LabelerName": "Nextsource Pharma",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240912",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "58181-7025-1",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 BOX (58181-7025-1) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "58181-7025-01",
"ProductNDC": "58181-7025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hcl",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212821",
"LabelerName": "Nextsource Pharma",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240912",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "58181-8010-2",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 BOX (58181-8010-2) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "58181-8010-02",
"ProductNDC": "58181-8010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hcl",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212821",
"LabelerName": "Nextsource Pharma",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240912",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "58181-8025-2",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 BOX (58181-8025-2) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "58181-8025-02",
"ProductNDC": "58181-8025",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hcl",
"NonProprietaryName": "Lidocaine Hcl",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212821",
"LabelerName": "Nextsource Pharma",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240912",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.",
"Description": "Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid."
},
{
"NDCCode": "0003-5200-56",
"PackageDescription": "1 KIT in 1 CARTON (0003-5200-56) * 1 BLISTER PACK in 1 PACKAGE (0003-0050-04) / 4 CAPSULE, COATED PELLETS in 1 BLISTER PACK * 1 BLISTER PACK in 1 PACKAGE (0003-1100-01) / 52 CAPSULE, COATED PELLETS in 1 BLISTER PACK",
"NDC11Code": "00003-5200-56",
"ProductNDC": "0003-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cobenfy",
"NonProprietaryName": "Xanomeline And Trospium Chloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20240927",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216158",
"LabelerName": "E.R. Squibb & Sons, L.L.C.",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240927",
"SamplePackage": "N",
"IndicationAndUsage": "COBENFY is indicated for the treatment of schizophrenia in adults.",
"Description": "COBENFY is a combination of xanomeline, a muscarinic agonist, and trospium chloride, a muscarinic antagonist. The chemical name of xanomeline tartrate is pyridine, 3-[4-(hexyloxy)-1,2,5-thiadiazol-3-yl]-1,2,5,6-tetrahydro-1-methyl-, (2R,3R)-2,3-dihydroxybutanedioate (1:1). Its molecular formula is C14H23N3OS.C4H6O6 and its molecular weight is 431.51 g/mol. Xanomeline tartrate is a white to slightly tan crystalline solid. Xanomeline tartrate is highly soluble in protic solvents, such as methanol and water, and in polar organic solvents such as DMF and dimethyl sulfoxide (DMSO). It is poorly soluble in lipophilic organic solvents, such as hexane or octanol. The chemical structure of xanomeline tartrate is. Trospium chloride is a quaternary ammonium compound with the chemical name of spiro[8-azoniabicyclo[3.2.1]octane-8,1′-pyrrolidinium], 3-[(2-hydroxy-2,2-diphenylacetyl)oxy]-, chloride (1:1), (1α,3β,5α). The molecular formula of trospium chloride is C25H30NO3.Cl and its molecular weight is 427.96 g/mol. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. Trospium chloride is highly soluble in water, freely soluble in methanol, and practically insoluble in methylene chloride. The chemical structure of trospium chloride is. COBENFY (xanomeline and trospium chloride) is for oral administration and is available in capsules in the following strengths: 1 50 mg/20 mg (equivalent to 76.7 mg xanomeline tartrate and 18.3 mg trospium)., 2 100 mg/20 mg (equivalent to 153.3 mg xanomeline tartrate and 18.3 mg trospium)., 3 125 mg/30 mg (equivalent to 191.7 mg xanomeline tartrate and 27.5 mg trospium)."
},
{
"NDCCode": "0009-5200-01",
"PackageDescription": "1 KIT in 1 PACKAGE (0009-5200-01) * 1 mL in 1 VIAL, SINGLE-DOSE (0009-5376-04) * 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "00009-5200-01",
"ProductNDC": "0009-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Somavert",
"NonProprietaryName": "Pegvisomant",
"DosageFormName": "KIT",
"StartMarketingDate": "20140731",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021106",
"LabelerName": "Pharmacia and Upjohn Company LLC",
"Status": "Deprecated",
"LastUpdate": "2019-12-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20140731",
"SamplePackage": "N"
},
{
"NDCCode": "0093-5200-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (0093-5200-05) ",
"NDC11Code": "00093-5200-05",
"ProductNDC": "0093-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075022",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040326",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula. C21H31N5O2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "0093-5200-06",
"PackageDescription": "60 TABLET in 1 BOTTLE (0093-5200-06) ",
"NDC11Code": "00093-5200-06",
"ProductNDC": "0093-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20040326",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075022",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040326",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula. C21H31N5O2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "0187-5200-30",
"PackageDescription": "1 TUBE in 1 CARTON (0187-5200-30) > 30 g in 1 TUBE",
"NDC11Code": "00187-5200-30",
"ProductNDC": "0187-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carac",
"NonProprietaryName": "Fluorouracil",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130628",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020985",
"LabelerName": "Bausch Health US, LLC",
"SubstanceName": "FLUOROURACIL",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20130628",
"SamplePackage": "N",
"IndicationAndUsage": "Carac is indicated for the topical treatment of multiple actinic or solar keratoses of the face and anterior scalp.",
"Description": "Carac® (fluorouracil cream) Cream, 0.5%, contains fluorouracil for topical dermatologic use. Chemically, fluorouracil is 5-fluoro-2,4(1H, 3H)-pyrimidinedione. The molecular formula is C4H3FN2O2. Fluorouracil has a molecular weight of 130.08. Carac Cream contains 0.5% fluorouracil, with 0.35% being incorporated into a patented porous microsphere (Microsponge®) composed of methyl methacrylate/glycol dimethacrylate crosspolymer and dimethicone. The cream formulation contains the following other inactive ingredients: Carbomer Homopolymer Type C, glycerin, methyl gluceth-20, methylparaben, octyl hydroxy stearate, polyethylene glycol 400, polysorbate 80, propylene glycol, propylparaben, purified water, sorbitan monooleate, stearic acid, and trolamine."
},
{
"NDCCode": "0220-5200-41",
"PackageDescription": "200 [kp_C] in 1 TUBE (0220-5200-41) ",
"NDC11Code": "00220-5200-41",
"ProductNDC": "0220-5200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Veratrum Album",
"NonProprietaryName": "Veratrum Album Root",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "19830303",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Boiron",
"SubstanceName": "VERATRUM ALBUM ROOT",
"StrengthNumber": "200",
"StrengthUnit": "[kp_C]/200[kp_C]",
"Status": "Active",
"LastUpdate": "2023-09-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19830303",
"SamplePackage": "N",
"IndicationAndUsage": "Diarrhea with vomiting and profuse sweating*."
},
{
"NDCCode": "0378-5200-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (0378-5200-01) ",
"NDC11Code": "00378-5200-01",
"ProductNDC": "0378-5200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tolmetin Sodium",
"NonProprietaryName": "Tolmetin Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19930527",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073393",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "TOLMETIN SODIUM",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-06-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "19930527",
"SamplePackage": "N"
},
{
"NDCCode": "0904-5200-65",
"PackageDescription": "368 g in 1 BOTTLE (0904-5200-65) ",
"NDC11Code": "00904-5200-65",
"ProductNDC": "0904-5200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Natural Fiber Therapy",
"ProprietaryNameSuffix": "Natural Laxative",
"NonProprietaryName": "Psyllium Husk",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20110802",
"EndMarketingDate": "20220228",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "PSYLLIUM HUSK",
"StrengthNumber": "3.4",
"StrengthUnit": "g/7g",
"Status": "Deprecated",
"LastUpdate": "2022-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110802",
"EndMarketingDatePackage": "20220228",
"SamplePackage": "N"
},
{
"NDCCode": "0904-5200-66",
"PackageDescription": "538 g in 1 BOTTLE (0904-5200-66) ",
"NDC11Code": "00904-5200-66",
"ProductNDC": "0904-5200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Natural Fiber Therapy",
"ProprietaryNameSuffix": "Natural Laxative",
"NonProprietaryName": "Psyllium Husk",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20110802",
"EndMarketingDate": "20220228",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Major Pharmaceuticals",
"SubstanceName": "PSYLLIUM HUSK",
"StrengthNumber": "3.4",
"StrengthUnit": "g/7g",
"Status": "Deprecated",
"LastUpdate": "2022-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110802",
"EndMarketingDatePackage": "20220228",
"SamplePackage": "N"
},
{
"NDCCode": "0924-5200-02",
"PackageDescription": "10 PACKET in 1 BOX (0924-5200-02) > .9 mL in 1 PACKET (0924-5200-01) ",
"NDC11Code": "00924-5200-02",
"ProductNDC": "0924-5200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sting Relief",
"NonProprietaryName": "Alcohol, Lidocaine Hydrochloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120306",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Acme United Corporation",
"SubstanceName": "ALCOHOL; LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": ".5; 20",
"StrengthUnit": "mL/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20120306",
"SamplePackage": "N",
"IndicationAndUsage": "First aid analgesic to help prevent infection in and provide temporary relief of the pain of: : 1 Insect bites and stings , 2 Minor scrapes and burns ."
},
{
"NDCCode": "0924-5200-03",
"PackageDescription": "50 PACKET in 1 BOX (0924-5200-03) > .9 mL in 1 PACKET (0924-5200-01) ",
"NDC11Code": "00924-5200-03",
"ProductNDC": "0924-5200",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sting Relief",
"NonProprietaryName": "Alcohol, Lidocaine Hydrochloride",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120306",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Acme United Corporation",
"SubstanceName": "ALCOHOL; LIDOCAINE HYDROCHLORIDE",
"StrengthNumber": ".5; 20",
"StrengthUnit": "mL/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20120306",
"SamplePackage": "N",
"IndicationAndUsage": "First aid analgesic to help prevent infection in and provide temporary relief of the pain of: : 1 Insect bites and stings , 2 Minor scrapes and burns ."
},
{
"NDCCode": "22840-5200-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (22840-5200-2) ",
"NDC11Code": "22840-5200-02",
"ProductNDC": "22840-5200",
"ProductTypeName": "NON-STANDARDIZED ALLERGENIC",
"ProprietaryName": "Bahia Grass",
"NonProprietaryName": "Paspalum Notatum",
"DosageFormName": "SOLUTION",
"RouteName": "INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19810915",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101833",
"LabelerName": "Greer Laboratories, Inc.",
"SubstanceName": "PASPALUM NOTATUM POLLEN",
"StrengthNumber": ".05",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]",
"Status": "Active",
"LastUpdate": "2025-06-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19810915",
"SamplePackage": "N",
"IndicationAndUsage": "Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .",
"Description": "Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>58181-5200-1</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 PACKAGE (58181-5200-1) / 250 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>58181-5200-01</NDC11Code>
<ProductNDC>58181-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevoflurane</ProprietaryName>
<NonProprietaryName>Sevoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20240221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214382</ApplicationNumber>
<LabelerName>NextSource Pharma</LabelerName>
<SubstanceName>SEVOFLURANE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240221</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
<Description>Sevoflurane USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, Physical Constants are. Distribution Partition Coefficients at 37°C. Mean Component/Gas Partition Coefficients at 25°C for Polymers Used Commonly in Medical Applications. Sevoflurane is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane is a clear, colorless, liquid containing no additives. Sevoflurane is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane occurs in the presence of strong acids or heat. When in contact with alkaline CO 2absorbents (e.g., Baralyme ®and to a lesser extent soda lime) within the anesthesia machine, sevoflurane can undergo degradation under certain conditions. Degradation of sevoflurane is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane concentration, decreased fresh gas flow and desiccated CO 2absorbents (especially with potassium hydroxide containing absorbents e.g. Baralyme). Sevoflurane alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C 4H 2F 6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C 5H 6F 6O), also known as Compound B. The second pathway for degradation of sevoflurane, which occurs primarily in the presence of desiccated CO 2absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Figure 1. Fresh Gas Flow Rate versus Compound A Levels in a Circle Absorber System. Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO 2absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO 2and Compound A production is illustrated in the following in vitrosimulation where CO 2was added to a circle absorber system. Figure 2. Carbon Dioxide Flow versus Compound A and Maximum Temperature. Compound A concentration in a circle absorber system increases as a function of increasing CO 2absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane concentrations and duration of anesthesia. In a clinical study in which sevoflurane was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane exposure are shown in Figure 2a. Figure 2a. ppm·hr versus MAC·hr at Flow Rate of 1 L/min. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC 50reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane occurs primarily in the presence of desiccated CO 2absorbents and leads to the dissociation of sevoflurane into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme ®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO 2absorbents and maximum sevoflurane concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO 2absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane to the desiccated KOH containing CO 2absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
</NDC>
<NDC>
<NDCCode>58181-3030-5</NDCCode>
<PackageDescription>5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3030-5)</PackageDescription>
<NDC11Code>58181-3030-05</NDC11Code>
<ProductNDC>58181-3030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140729</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>58181-3031-5</NDCCode>
<PackageDescription>5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3031-5)</PackageDescription>
<NDC11Code>58181-3031-05</NDC11Code>
<ProductNDC>58181-3031</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140729</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>58181-3032-5</NDCCode>
<PackageDescription>5 CAPSULE, GELATIN COATED in 1 BOTTLE (58181-3032-5)</PackageDescription>
<NDC11Code>58181-3032-05</NDC11Code>
<ProductNDC>58181-3032</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lomustine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140729</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>58181-3040-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58181-3040-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>58181-3040-05</NDC11Code>
<ProductNDC>58181-3040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gleostine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140818</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .</IndicationAndUsage>
<Description>Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2.</Description>
</NDC>
<NDC>
<NDCCode>58181-3041-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58181-3041-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>58181-3041-05</NDC11Code>
<ProductNDC>58181-3041</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gleostine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140818</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .</IndicationAndUsage>
<Description>Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2.</Description>
</NDC>
<NDC>
<NDCCode>58181-3042-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58181-3042-5) / 5 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>58181-3042-05</NDC11Code>
<ProductNDC>58181-3042</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gleostine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140818</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Gleostine is an alkylating drug indicated for the treatment of patients with: 1 Brain tumors, primary and metastatic, following appropriate surgical and/or radiotherapeutic procedures. ( 1) , 2 Hodgkin's lymphoma in combination with other chemotherapies, following disease progression with initial chemotherapy. ( 1) .</IndicationAndUsage>
<Description>Gleostine (lomustine) is an alkylating drug for oral administration. The chemical name for lomustine is 1-(2-chloro-ethyl)-3-cyclohexyl-1-nitrosourea and the molecular formula is C 9H 16ClN 3O 2. The molecular weight is 233.71. Lomustine is a yellow powder, which is soluble in 10% ethanol (0.05 mg per mL) and in absolute alcohol (70 mg per mL). Lomustine is insoluble in water (<0.05 mg per mL). The chemical structure is. Gleostine is supplied as 10 mg, 40 mg, and 100 mg capsules and contains the following inactive ingredients: magnesium stearate NF and mannitol USP. The capsule shells are composed of gelatin and coloring pigments, depending on the strength: titanium dioxide, and/or yellow iron oxide, and/or Indigotine – FD&C Blue2.</Description>
</NDC>
<NDC>
<NDCCode>58181-3043-5</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (58181-3043-5) > 5 CAPSULE, GELATIN COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>58181-3043-05</NDC11Code>
<ProductNDC>58181-3043</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Gleostine</ProprietaryName>
<NonProprietaryName>Lomustine</NonProprietaryName>
<DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151105</StartMarketingDate>
<EndMarketingDate>20180630</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017588</ApplicationNumber>
<LabelerName>NextSource Biotechnology, LLC</LabelerName>
<SubstanceName>LOMUSTINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20151105</StartMarketingDatePackage>
<EndMarketingDatePackage>20180630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58181-4102-5</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (58181-4102-5) </PackageDescription>
<NDC11Code>58181-4102-05</NDC11Code>
<ProductNDC>58181-4102</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218282</ApplicationNumber>
<LabelerName>NextSource Pharma</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cyclophosphamide, USP is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2P H 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline and ethanol. Each capsule for oral administration contains 25 mg or 50 mg cyclophosphamide (anhydrous, USP) and the following inactive ingredients: Starch 1500 and sodium stearyl fumarate. Each gelatin capsule shell contains FD&C Blue #1, FD&C Red #3, gelatin and titanium dioxide. In addition to the ingredients listed above, each capsule contains Opacode (Black) monogramming ink. Opacode (Black) contains Ferrosoferric oxide-black, propylene glycol and shellac. FDA approved dissolution test method differs from USP.</Description>
</NDC>
<NDC>
<NDCCode>58181-4115-0</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (58181-4115-0) </PackageDescription>
<NDC11Code>58181-4115-00</NDC11Code>
<ProductNDC>58181-4115</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclophosphamide</ProprietaryName>
<NonProprietaryName>Cyclophosphamide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218282</ApplicationNumber>
<LabelerName>NextSource Pharma</LabelerName>
<SubstanceName>CYCLOPHOSPHAMIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cyclophosphamide, USP is a synthetic antineoplastic drug chemically related to the nitrogen mustards. The chemical name for cyclophosphamide is 2-[bis(2-chloroethyl)amino]tetrahydro-2H-1,3,2-oxazaphosphorine 2-oxide monohydrate, and has the following structural formula. Cyclophosphamide has a molecular formula C 7H 15Cl 2N 2O 2P H 2O and a molecular weight of 279.1. Cyclophosphamide is soluble in water, saline and ethanol. Each capsule for oral administration contains 25 mg or 50 mg cyclophosphamide (anhydrous, USP) and the following inactive ingredients: Starch 1500 and sodium stearyl fumarate. Each gelatin capsule shell contains FD&C Blue #1, FD&C Red #3, gelatin and titanium dioxide. In addition to the ingredients listed above, each capsule contains Opacode (Black) monogramming ink. Opacode (Black) contains Ferrosoferric oxide-black, propylene glycol and shellac. FDA approved dissolution test method differs from USP.</Description>
</NDC>
<NDC>
<NDCCode>58181-4321-4</NDCCode>
<PackageDescription>14 POUCH in 1 CARTON (58181-4321-4) / 1 CAPSULE in 1 POUCH</PackageDescription>
<NDC11Code>58181-4321-04</NDC11Code>
<ProductNDC>58181-4321</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203898</ApplicationNumber>
<LabelerName>NextSource Biotechnology LLC</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58181-4331-4</NDCCode>
<PackageDescription>14 POUCH in 1 CARTON (58181-4331-4) / 1 CAPSULE in 1 POUCH</PackageDescription>
<NDC11Code>58181-4331-04</NDC11Code>
<ProductNDC>58181-4331</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203898</ApplicationNumber>
<LabelerName>NextSource Biotechnology LLC</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>140</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58181-4341-4</NDCCode>
<PackageDescription>14 POUCH in 1 CARTON (58181-4341-4) / 1 CAPSULE in 1 POUCH</PackageDescription>
<NDC11Code>58181-4341-04</NDC11Code>
<ProductNDC>58181-4341</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203898</ApplicationNumber>
<LabelerName>NextSource Biotechnology LLC</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58181-4351-4</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (58181-4351-4) / 1 CAPSULE in 1 POUCH</PackageDescription>
<NDC11Code>58181-4351-04</NDC11Code>
<ProductNDC>58181-4351</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203898</ApplicationNumber>
<LabelerName>NextSource Biotechnology LLC</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-07-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>58181-7010-1</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 BOX (58181-7010-1) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>58181-7010-01</NDC11Code>
<ProductNDC>58181-7010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hcl</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212821</ApplicationNumber>
<LabelerName>Nextsource Pharma</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>58181-7025-1</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (58181-7025-1) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>58181-7025-01</NDC11Code>
<ProductNDC>58181-7025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hcl</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212821</ApplicationNumber>
<LabelerName>Nextsource Pharma</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>58181-8010-2</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 BOX (58181-8010-2) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>58181-8010-02</NDC11Code>
<ProductNDC>58181-8010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hcl</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212821</ApplicationNumber>
<LabelerName>Nextsource Pharma</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>58181-8025-2</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (58181-8025-2) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>58181-8025-02</NDC11Code>
<ProductNDC>58181-8025</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hcl</ProprietaryName>
<NonProprietaryName>Lidocaine Hcl</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212821</ApplicationNumber>
<LabelerName>Nextsource Pharma</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine Hydrochloride Injection, USP is indicated for production of local or regional anesthesia by infiltration techniques such as percutaneous injection and intravenous regional anesthesia by peripheral nerve block techniques such as brachial plexus and intercostal and by central neural techniques such as lumbar and caudal epidural blocks, when the accepted procedures for these techniques as described in standard textbooks are observed.</IndicationAndUsage>
<Description>Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, aqueous solution that contains a local anesthetic agent and is administered parenterally by injection. See INDICATIONSfor specific uses. The solution contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8. Lidocaine HCl (C 14H 22N 2O HCl) has the following structural formula:. Lidocaine Hydrochloride Injection, USP single dose solutions are methylparaben free. Lidocaine Hydrochloride Injection, USP is a sterile, nonpyrogenic, isotonic solution containing sodium chloride. The pH of this solution is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid.</Description>
</NDC>
<NDC>
<NDCCode>0003-5200-56</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (0003-5200-56) * 1 BLISTER PACK in 1 PACKAGE (0003-0050-04) / 4 CAPSULE, COATED PELLETS in 1 BLISTER PACK * 1 BLISTER PACK in 1 PACKAGE (0003-1100-01) / 52 CAPSULE, COATED PELLETS in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00003-5200-56</NDC11Code>
<ProductNDC>0003-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cobenfy</ProprietaryName>
<NonProprietaryName>Xanomeline And Trospium Chloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240927</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216158</ApplicationNumber>
<LabelerName>E.R. Squibb & Sons, L.L.C.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>COBENFY is indicated for the treatment of schizophrenia in adults.</IndicationAndUsage>
<Description>COBENFY is a combination of xanomeline, a muscarinic agonist, and trospium chloride, a muscarinic antagonist. The chemical name of xanomeline tartrate is pyridine, 3-[4-(hexyloxy)-1,2,5-thiadiazol-3-yl]-1,2,5,6-tetrahydro-1-methyl-, (2R,3R)-2,3-dihydroxybutanedioate (1:1). Its molecular formula is C14H23N3OS.C4H6O6 and its molecular weight is 431.51 g/mol. Xanomeline tartrate is a white to slightly tan crystalline solid. Xanomeline tartrate is highly soluble in protic solvents, such as methanol and water, and in polar organic solvents such as DMF and dimethyl sulfoxide (DMSO). It is poorly soluble in lipophilic organic solvents, such as hexane or octanol. The chemical structure of xanomeline tartrate is. Trospium chloride is a quaternary ammonium compound with the chemical name of spiro[8-azoniabicyclo[3.2.1]octane-8,1′-pyrrolidinium], 3-[(2-hydroxy-2,2-diphenylacetyl)oxy]-, chloride (1:1), (1α,3β,5α). The molecular formula of trospium chloride is C25H30NO3.Cl and its molecular weight is 427.96 g/mol. Trospium chloride is a fine, colorless to slightly yellow, crystalline solid. Trospium chloride is highly soluble in water, freely soluble in methanol, and practically insoluble in methylene chloride. The chemical structure of trospium chloride is. COBENFY (xanomeline and trospium chloride) is for oral administration and is available in capsules in the following strengths: 1 50 mg/20 mg (equivalent to 76.7 mg xanomeline tartrate and 18.3 mg trospium)., 2 100 mg/20 mg (equivalent to 153.3 mg xanomeline tartrate and 18.3 mg trospium)., 3 125 mg/30 mg (equivalent to 191.7 mg xanomeline tartrate and 27.5 mg trospium).</Description>
</NDC>
<NDC>
<NDCCode>0009-5200-01</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE (0009-5200-01) * 1 mL in 1 VIAL, SINGLE-DOSE (0009-5376-04) * 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>00009-5200-01</NDC11Code>
<ProductNDC>0009-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Somavert</ProprietaryName>
<NonProprietaryName>Pegvisomant</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140731</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021106</ApplicationNumber>
<LabelerName>Pharmacia and Upjohn Company LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-12-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140731</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0093-5200-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (0093-5200-05) </PackageDescription>
<NDC11Code>00093-5200-05</NDC11Code>
<ProductNDC>0093-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075022</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula. C21H31N5O2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0093-5200-06</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (0093-5200-06) </PackageDescription>
<NDC11Code>00093-5200-06</NDC11Code>
<ProductNDC>0093-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20040326</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075022</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorders or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association’s Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling “on edge,” irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound. Chemically, buspirone hydrochloride is N-[4-[4-(2-pyrimidinyl)-1-piperazinyl]butyl]-1,1-cyclopentanediacetamide monohydrochloride, which can be represented by the following structural formula. C21H31N5O2HCl M.W. 421.96. Each tablet, for oral administration, contains 5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride, USP (equivalent to 4.6 mg, 9.1 mg, 13.7 mg, and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one-third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>0187-5200-30</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (0187-5200-30) > 30 g in 1 TUBE</PackageDescription>
<NDC11Code>00187-5200-30</NDC11Code>
<ProductNDC>0187-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carac</ProprietaryName>
<NonProprietaryName>Fluorouracil</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130628</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020985</ApplicationNumber>
<LabelerName>Bausch Health US, LLC</LabelerName>
<SubstanceName>FLUOROURACIL</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130628</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carac is indicated for the topical treatment of multiple actinic or solar keratoses of the face and anterior scalp.</IndicationAndUsage>
<Description>Carac® (fluorouracil cream) Cream, 0.5%, contains fluorouracil for topical dermatologic use. Chemically, fluorouracil is 5-fluoro-2,4(1H, 3H)-pyrimidinedione. The molecular formula is C4H3FN2O2. Fluorouracil has a molecular weight of 130.08. Carac Cream contains 0.5% fluorouracil, with 0.35% being incorporated into a patented porous microsphere (Microsponge®) composed of methyl methacrylate/glycol dimethacrylate crosspolymer and dimethicone. The cream formulation contains the following other inactive ingredients: Carbomer Homopolymer Type C, glycerin, methyl gluceth-20, methylparaben, octyl hydroxy stearate, polyethylene glycol 400, polysorbate 80, propylene glycol, propylparaben, purified water, sorbitan monooleate, stearic acid, and trolamine.</Description>
</NDC>
<NDC>
<NDCCode>0220-5200-41</NDCCode>
<PackageDescription>200 [kp_C] in 1 TUBE (0220-5200-41) </PackageDescription>
<NDC11Code>00220-5200-41</NDC11Code>
<ProductNDC>0220-5200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Veratrum Album</ProprietaryName>
<NonProprietaryName>Veratrum Album Root</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19830303</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Boiron</LabelerName>
<SubstanceName>VERATRUM ALBUM ROOT</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>[kp_C]/200[kp_C]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-09-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830303</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diarrhea with vomiting and profuse sweating*.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0378-5200-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (0378-5200-01) </PackageDescription>
<NDC11Code>00378-5200-01</NDC11Code>
<ProductNDC>0378-5200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tolmetin Sodium</ProprietaryName>
<NonProprietaryName>Tolmetin Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930527</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073393</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TOLMETIN SODIUM</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-06-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930527</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0904-5200-65</NDCCode>
<PackageDescription>368 g in 1 BOTTLE (0904-5200-65) </PackageDescription>
<NDC11Code>00904-5200-65</NDC11Code>
<ProductNDC>0904-5200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Natural Fiber Therapy</ProprietaryName>
<ProprietaryNameSuffix>Natural Laxative</ProprietaryNameSuffix>
<NonProprietaryName>Psyllium Husk</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110802</StartMarketingDate>
<EndMarketingDate>20220228</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>PSYLLIUM HUSK</SubstanceName>
<StrengthNumber>3.4</StrengthNumber>
<StrengthUnit>g/7g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110802</StartMarketingDatePackage>
<EndMarketingDatePackage>20220228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0904-5200-66</NDCCode>
<PackageDescription>538 g in 1 BOTTLE (0904-5200-66) </PackageDescription>
<NDC11Code>00904-5200-66</NDC11Code>
<ProductNDC>0904-5200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Natural Fiber Therapy</ProprietaryName>
<ProprietaryNameSuffix>Natural Laxative</ProprietaryNameSuffix>
<NonProprietaryName>Psyllium Husk</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110802</StartMarketingDate>
<EndMarketingDate>20220228</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Major Pharmaceuticals</LabelerName>
<SubstanceName>PSYLLIUM HUSK</SubstanceName>
<StrengthNumber>3.4</StrengthNumber>
<StrengthUnit>g/7g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110802</StartMarketingDatePackage>
<EndMarketingDatePackage>20220228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0924-5200-02</NDCCode>
<PackageDescription>10 PACKET in 1 BOX (0924-5200-02) > .9 mL in 1 PACKET (0924-5200-01) </PackageDescription>
<NDC11Code>00924-5200-02</NDC11Code>
<ProductNDC>0924-5200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sting Relief</ProprietaryName>
<NonProprietaryName>Alcohol, Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120306</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Acme United Corporation</LabelerName>
<SubstanceName>ALCOHOL; LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5; 20</StrengthNumber>
<StrengthUnit>mL/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid analgesic to help prevent infection in and provide temporary relief of the pain of: : 1 Insect bites and stings , 2 Minor scrapes and burns .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0924-5200-03</NDCCode>
<PackageDescription>50 PACKET in 1 BOX (0924-5200-03) > .9 mL in 1 PACKET (0924-5200-01) </PackageDescription>
<NDC11Code>00924-5200-03</NDC11Code>
<ProductNDC>0924-5200</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sting Relief</ProprietaryName>
<NonProprietaryName>Alcohol, Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120306</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Acme United Corporation</LabelerName>
<SubstanceName>ALCOHOL; LIDOCAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5; 20</StrengthNumber>
<StrengthUnit>mL/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120306</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>First aid analgesic to help prevent infection in and provide temporary relief of the pain of: : 1 Insect bites and stings , 2 Minor scrapes and burns .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>22840-5200-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (22840-5200-2) </PackageDescription>
<NDC11Code>22840-5200-02</NDC11Code>
<ProductNDC>22840-5200</ProductNDC>
<ProductTypeName>NON-STANDARDIZED ALLERGENIC</ProductTypeName>
<ProprietaryName>Bahia Grass</ProprietaryName>
<NonProprietaryName>Paspalum Notatum</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19810915</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101833</ApplicationNumber>
<LabelerName>Greer Laboratories, Inc.</LabelerName>
<SubstanceName>PASPALUM NOTATUM POLLEN</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Pollen Allergenic Extract [EPC], Pollen [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19810915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Non-Standardized Allergenic Extracts are indicated for. : 1 Skin test diagnosis of patients with a clinical history of allergies to one or more of the specific non-standardized allergens., 2 Immunotherapy for the reduction of allergen-induced allergic symptoms confirmed by appropriate positive skin tests or by in vitro testing for allergen-specific IgE antibodies. .</IndicationAndUsage>
<Description>Non-Standardized Allergenic Extracts are sterile solutions used for percutaneous testing, intradermal testing, or subcutaneous immunotherapy. Aqueous extracts contain the soluble extractants of the source material in water for injection, 0.5% sodium chloride, 0.54% sodium bicarbonate, and 0.4% phenol. Glycerinated extracts contain the soluable extractants of the source material in water for injection and 50% glycerin, 0.25% sodium chloride, 0.27% sodium bicarbonate, and 0.2% phenol. The pH of the extracts range from 6 to 9. Certain food extracts (Barley, Oat, Pineapple, Rye, Spinach, and Wheat), labeled “For Diagnostic Use Only”, contain 0.1% sodium formaldehyde sulfoxylate as an antioxidant. Source materials used in the manufacture of allergenic extracts are collected from natural sources or from laboratory cultures. Non-Standardized Allergenic Extracts appear as clear and colorless to dark brown solutions that should be free of particulate matter. Extracts are labeled either as weight-to-volume based on the weight of the source material to the volume of the extracting fluid, or as PNU/milliliter with one PNU representing 0.00001 mg of protein nitrogen per milliliter.</Description>
</NDC>
</NDCList>