{
"NDC": [
{
"NDCCode": "59011-446-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (59011-446-25) > 25 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "59011-0446-25",
"ProductNDC": "59011-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dilaudid Hp",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19840111",
"EndMarketingDate": "20160701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019034",
"LabelerName": "Purdue Pharma LP",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "51655-446-25",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (51655-446-25) ",
"NDC11Code": "51655-0446-25",
"ProductNDC": "51655-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201002",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078420",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220504",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.",
"Description": "Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide."
},
{
"NDCCode": "59011-261-25",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (59011-261-25)",
"NDC11Code": "59011-0261-25",
"ProductNDC": "59011-261",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ms Contin",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19870701",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019516",
"LabelerName": "Purdue Pharma LP",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "MS CONTIN is indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use.",
"Description": "MS CONTIN (morphine sulfate extended-release tablets) is for oral use and contains morphine sulfate, an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). The 15 mg tablets also contain: FD&C Blue No. 2, lactose, polysorbate 80. The 30 mg tablets also contain: D&C Red No. 7, FD&C Blue No. 1, lactose, polysorbate 80. The 60 mg tablets also contain: D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, lactose. The 100 mg tablets also contain: black iron oxide. The 200 mg tablets also contain: D&C Yellow No. 10, FD&C Blue No. 1, hydroxypropyl cellulose. Morphine sulfate is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is."
},
{
"NDCCode": "59011-442-25",
"PackageDescription": "25 AMPULE in 1 CARTON (59011-442-25) > 2 mL in 1 AMPULE",
"NDC11Code": "59011-0442-25",
"ProductNDC": "59011-442",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dilaudid",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19260101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019034",
"LabelerName": "Purdue Pharma LP",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "59011-452-01",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (59011-452-01) > 25 TABLET in 1 BLISTER PACK",
"NDC11Code": "59011-0452-01",
"ProductNDC": "59011-452",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dilaudid",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19560101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019892",
"LabelerName": "Purdue Pharma LP",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2017-10-03",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "59011-454-01",
"PackageDescription": "4 BLISTER PACK in 1 CARTON (59011-454-01) > 25 TABLET in 1 BLISTER PACK",
"NDC11Code": "59011-0454-01",
"ProductNDC": "59011-454",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dilaudid",
"NonProprietaryName": "Hydromorphone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19560101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019892",
"LabelerName": "Purdue Pharma LP",
"SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-02-01",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0143-9567-25",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9567-25) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9567-01) ",
"NDC11Code": "00143-9567-25",
"ProductNDC": "0143-9567",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime",
"NonProprietaryName": "Cefuroxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065048",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040109",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).",
"Description": "Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "0143-9568-25",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9568-25) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9568-01) ",
"NDC11Code": "00143-9568-25",
"ProductNDC": "0143-9568",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime",
"NonProprietaryName": "Cefuroxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20040109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065048",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040109",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).",
"Description": "Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "0143-9977-22",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9977-22) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9977-90) ",
"NDC11Code": "00143-9977-22",
"ProductNDC": "0143-9977",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime",
"NonProprietaryName": "Cefuroxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20040109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065048",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "1.5",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040109",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).",
"Description": "Cefuroxime, USP is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "0143-9979-22",
"PackageDescription": "25 VIAL in 1 CARTON (0143-9979-22) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9979-90) ",
"NDC11Code": "00143-9979-22",
"ProductNDC": "0143-9979",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime",
"NonProprietaryName": "Cefuroxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20040109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065048",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20040109",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).",
"Description": "Cefuroxime, USP is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "16714-446-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16714-446-01) ",
"NDC11Code": "16714-0446-01",
"ProductNDC": "16714-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20240831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085968",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride, USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "16714-446-02",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (16714-446-02) ",
"NDC11Code": "16714-0446-02",
"ProductNDC": "16714-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141201",
"EndMarketingDate": "20240831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085968",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20141201",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride, USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "21695-446-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (21695-446-30)",
"NDC11Code": "21695-0446-30",
"ProductNDC": "21695-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19771121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085969",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "21695-446-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (21695-446-90)",
"NDC11Code": "21695-0446-90",
"ProductNDC": "21695-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "19771121",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085969",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake."
},
{
"NDCCode": "25021-118-10",
"PackageDescription": "25 VIAL in 1 CARTON (25021-118-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "25021-0118-10",
"ProductNDC": "25021-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064125",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .",
"Description": "Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-[(carbamoyloxy)methyl]-7-[[(Z)-(furan-2-yl) (methoxyimino)acetyl] amino]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.37. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "25021-119-20",
"PackageDescription": "25 VIAL in 1 CARTON (25021-119-20) / 20 mL in 1 VIAL",
"NDC11Code": "25021-0119-20",
"ProductNDC": "25021-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064125",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "1.5",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .",
"Description": "Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-[(carbamoyloxy)methyl]-7-[[(Z)-(furan-2-yl) (methoxyimino)acetyl] amino]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.37. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "25021-182-66",
"PackageDescription": "25 VIAL in 1 CARTON (25021-182-66) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "25021-0182-66",
"ProductNDC": "25021-182",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20160901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064125",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .",
"Description": "Cefuroxime is a semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl) acetamido] ceph-3-em-4-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "25021-183-67",
"PackageDescription": "25 VIAL in 1 CARTON (25021-183-67) > 16 mL in 1 VIAL",
"NDC11Code": "25021-0183-67",
"ProductNDC": "25021-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Sodium",
"NonProprietaryName": "Cefuroxime Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064125",
"LabelerName": "Sagent Pharmaceuticals",
"SubstanceName": "CEFUROXIME SODIUM",
"StrengthNumber": "1.5",
"StrengthUnit": "g/16mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20160901",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .",
"Description": "Cefuroxime is a semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl) acetamido] ceph-3-em-4-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5."
},
{
"NDCCode": "29300-446-19",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (29300-446-19) ",
"NDC11Code": "29300-0446-19",
"ProductNDC": "29300-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260803",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA219593",
"LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Active",
"LastUpdate": "2026-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260803",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.",
"Description": "Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is sparingly soluble in water, very slightly soluble to practically insoluble in methanol, acetonitrile and practically insoluble in heptane. The log of the partition coefficient is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with hydroxypropyl cellulose, mannitol, pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate, and titanium dioxide. In addition, the 25 mg,50 mg and 300 mg capsule shells contains FD & C Yellow# 6.The 100 mg, 150 mg, 200 mg and 225 mg capsule shells contains FD & C Blue 1.The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac."
},
{
"NDCCode": "30142-446-65",
"PackageDescription": "30 BLISTER PACK in 1 CARTON (30142-446-65) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK",
"NDC11Code": "30142-0446-65",
"ProductNDC": "30142-446",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief",
"NonProprietaryName": "Loratadine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20210604",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076011",
"LabelerName": "Kroger Company",
"SubstanceName": "LORATADINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-02-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210604",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat."
},
{
"NDCCode": "42291-446-30",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42291-446-30) ",
"NDC11Code": "42291-0446-30",
"ProductNDC": "42291-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207497",
"LabelerName": "AvKARE",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200522",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug. (1.2) .",
"Description": "Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pK a of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. USP Dissolution Test pending."
},
{
"NDCCode": "46708-446-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-446-30) ",
"NDC11Code": "46708-0446-30",
"ProductNDC": "46708-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090428",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160523",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively."
},
{
"NDCCode": "46708-446-31",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (46708-446-31) ",
"NDC11Code": "46708-0446-31",
"ProductNDC": "46708-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090428",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160523",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively."
},
{
"NDCCode": "46708-446-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-446-90) ",
"NDC11Code": "46708-0446-90",
"ProductNDC": "46708-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090428",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160523",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively."
},
{
"NDCCode": "46708-446-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-446-91) ",
"NDC11Code": "46708-0446-91",
"ProductNDC": "46708-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Losartan Potassium",
"NonProprietaryName": "Losartan Potassium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090428",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LOSARTAN POTASSIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160523",
"SamplePackage": "N",
"IndicationAndUsage": "Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).",
"Description": "Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively."
},
{
"NDCCode": "51167-446-01",
"PackageDescription": "4 PACKAGE in 1 CARTON (51167-446-01) / 1 KIT in 1 PACKAGE * 1 GRANULE in 1 PACKET (51167-746-07) * 1 GRANULE in 1 PACKET (51167-846-07) ",
"NDC11Code": "51167-0446-01",
"ProductNDC": "51167-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trikafta",
"NonProprietaryName": "Elexacaftor, Tezacaftor, And Ivacaftor",
"DosageFormName": "KIT",
"StartMarketingDate": "20230426",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217660",
"LabelerName": "Vertex Pharmaceuticals Incorporated",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230426",
"SamplePackage": "N",
"IndicationAndUsage": "TRIKAFTA is indicated for the treatment of cystic fibrosis (CF) in adult and pediatric patients aged 2 years and older who have a clinical diagnosis of CF and who have at least one variant in the cystic fibrosis transmembrane conductance regulator (CFTR) gene that is either responsive based on clinical and/or in vitro data (see Table 6) or results in production of CFTR protein [see Clinical Pharmacology (12.1)]. If the patient's genotype is unknown, an FDA-cleared CF genetic test should be used to confirm the presence of at least one variant in the CFTR gene that is either responsive based on clinical and/or in vitro data or results in production of CFTR protein.",
"Description": "TRIKAFTA is a co-package of elexacaftor, tezacaftor and ivacaftor fixed-dose combination tablets or granules and ivacaftor tablets or granules. Both tablets and granules are for oral administration. The elexacaftor, tezacaftor and ivacaftor fixed-dose combination tablets are available as: orange, oblong-shaped, film-coated tablet containing 100 mg of elexacaftor, 50 mg of tezacaftor, 75 mg of ivacaftor, or light orange, oblong-shaped, film-coated tablet containing 50 mg of elexacaftor, 25 mg of tezacaftor, 37.5 mg of ivacaftor. The fixed-dose combination tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, hypromellose acetate succinate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. The tablet film coat contains hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, talc, and titanium dioxide. The ivacaftor tablet is available as a light blue, oblong-shaped, film-coated tablet containing 150 mg or 75 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The tablet film coat contains carnauba wax, FD&C Blue #2, PEG 3350, polyvinyl alcohol, talc, and titanium dioxide. The printing ink contains ammonium hydroxide, iron oxide black, propylene glycol, and shellac. The elexacaftor, tezacaftor and ivacaftor fixed-dose combination oral granules are white to off-white, sweetened, unflavored granules approximately 2 mm in diameter enclosed in unit-dose packets. Each unit-dose packet contains 100 mg of elexacaftor, 50 mg of tezacaftor, 75 mg of ivacaftor or 80 mg of elexacaftor, 40 mg of tezacaftor, 60 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, mannitol, sodium lauryl sulfate, and sucralose. The ivacaftor oral granules are white to off-white, sweetened, unflavored granules approximately 2 mm in diameter enclosed in unit-dose packets. Each unit-dose packet contains 75 mg or 59.5 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, mannitol, sodium lauryl sulfate, and sucralose. The active ingredients of TRIKAFTA are described below."
},
{
"NDCCode": "57297-446-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (57297-446-01)",
"NDC11Code": "57297-0446-01",
"ProductNDC": "57297-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201109",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .",
"Description": "Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "57297-446-03",
"PackageDescription": "1000 TABLET in 1 BOTTLE (57297-446-03)",
"NDC11Code": "57297-0446-03",
"ProductNDC": "57297-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201109",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .",
"Description": "Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "57297-446-13",
"PackageDescription": "10 TABLET in 1 BLISTER PACK (57297-446-13)",
"NDC11Code": "57297-0446-13",
"ProductNDC": "57297-446",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quetiapine Fumarate",
"NonProprietaryName": "Quetiapine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201109",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "QUETIAPINE FUMARATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .",
"Description": "Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow."
},
{
"NDCCode": "63187-446-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (63187-446-30) ",
"NDC11Code": "63187-0446-30",
"ProductNDC": "63187-446",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Diphenhydramine Hydrochloride",
"NonProprietaryName": "Diphenhydramine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20070524",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20190101",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>59011-446-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (59011-446-25) > 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>59011-0446-25</NDC11Code>
<ProductNDC>59011-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dilaudid Hp</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19840111</StartMarketingDate>
<EndMarketingDate>20160701</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019034</ApplicationNumber>
<LabelerName>Purdue Pharma LP</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>51655-446-25</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (51655-446-25) </PackageDescription>
<NDC11Code>51655-0446-25</NDC11Code>
<ProductNDC>51655-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201002</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078420</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220504</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of nabumetone tablets, USP and other treatment options before deciding to use nabumetone tablets. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Nabumetone tablets, USP are indicated for relief of signs and symptoms of osteoarthritis and rheumatoid arthritis.</IndicationAndUsage>
<Description>Nabumetone is a naphthylalkanone designated chemically as 4-(6-methoxy-2- naphthalenyl)-2- butanone. It has the following structure. Nabumetone, USP is a white or almost white crystalline substance with a molecular weight of 228.3. It is nonacidic, freely soluble in acetone, sparingly soluble in alcohol and in methanol, practically insoluble in water. It has an n-octanol:phosphate buffer partition coefficient of 2400 at pH 7.4. Each tablet, for oral administration contains either 500 mg or 750 mg of nabumetone, USP. In addition, each tablet contains the following inactive ingredients: hypromellose, microcrystalline cellulose, sodium lauryl sulfate, sodium starch glycolate, polyethylene glycol and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>59011-261-25</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (59011-261-25)</PackageDescription>
<NDC11Code>59011-0261-25</NDC11Code>
<ProductNDC>59011-261</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ms Contin</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19870701</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019516</ApplicationNumber>
<LabelerName>Purdue Pharma LP</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>MS CONTIN is indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Use.</IndicationAndUsage>
<Description>MS CONTIN (morphine sulfate extended-release tablets) is for oral use and contains morphine sulfate, an opioid agonist. Each tablet contains the following inactive ingredients common to all strengths: cetostearyl alcohol, hydroxyethyl cellulose, hypromellose, magnesium stearate, polyethylene glycol, talc and titanium dioxide. The tablet strengths describe the amount of morphine per tablet as the pentahydrated sulfate salt (morphine sulfate). The 15 mg tablets also contain: FD&C Blue No. 2, lactose, polysorbate 80. The 30 mg tablets also contain: D&C Red No. 7, FD&C Blue No. 1, lactose, polysorbate 80. The 60 mg tablets also contain: D&C Red No. 30, D&C Yellow No. 10, hydroxypropyl cellulose, lactose. The 100 mg tablets also contain: black iron oxide. The 200 mg tablets also contain: D&C Yellow No. 10, FD&C Blue No. 1, hydroxypropyl cellulose. Morphine sulfate is an odorless, white, crystalline powder with a bitter taste. It has a solubility of 1 in 21 parts of water and 1 in 1000 parts of alcohol, but is practically insoluble in chloroform or ether. The octanol: water partition coefficient of morphine is 1.42 at physiologic pH and the pKb is 7.9 for the tertiary nitrogen (mostly ionized at pH 7.4). Its molecular weight is 758.83 and its structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>59011-442-25</NDCCode>
<PackageDescription>25 AMPULE in 1 CARTON (59011-442-25) > 2 mL in 1 AMPULE</PackageDescription>
<NDC11Code>59011-0442-25</NDC11Code>
<ProductNDC>59011-442</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dilaudid</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19260101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019034</ApplicationNumber>
<LabelerName>Purdue Pharma LP</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59011-452-01</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (59011-452-01) > 25 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59011-0452-01</NDC11Code>
<ProductNDC>59011-452</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dilaudid</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19560101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>Purdue Pharma LP</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2017-10-03</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>59011-454-01</NDCCode>
<PackageDescription>4 BLISTER PACK in 1 CARTON (59011-454-01) > 25 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59011-0454-01</NDC11Code>
<ProductNDC>59011-454</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dilaudid</ProprietaryName>
<NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19560101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019892</ApplicationNumber>
<LabelerName>Purdue Pharma LP</LabelerName>
<SubstanceName>HYDROMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-01</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0143-9567-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9567-25) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9567-01) </PackageDescription>
<NDC11Code>00143-9567-25</NDC11Code>
<ProductNDC>0143-9567</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime</ProprietaryName>
<NonProprietaryName>Cefuroxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065048</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).</IndicationAndUsage>
<Description>Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0143-9568-25</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9568-25) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9568-01) </PackageDescription>
<NDC11Code>00143-9568-25</NDC11Code>
<ProductNDC>0143-9568</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime</ProprietaryName>
<NonProprietaryName>Cefuroxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20040109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065048</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).</IndicationAndUsage>
<Description>Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0143-9977-22</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9977-22) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9977-90) </PackageDescription>
<NDC11Code>00143-9977-22</NDC11Code>
<ProductNDC>0143-9977</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime</ProprietaryName>
<NonProprietaryName>Cefuroxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20040109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065048</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).</IndicationAndUsage>
<Description>Cefuroxime, USP is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0143-9979-22</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (0143-9979-22) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9979-90) </PackageDescription>
<NDC11Code>00143-9979-22</NDC11Code>
<ProductNDC>0143-9979</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime</ProprietaryName>
<NonProprietaryName>Cefuroxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20040109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065048</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20040109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, and Escherichia coli., 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp., 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains)., 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non–penicillinase-producing strains) in both males and females., 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non–penicillinase-producing strains).</IndicationAndUsage>
<Description>Cefuroxime, USP is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl)acetamido]ceph-3-em-4-carboxylate, and it has the following structural formula:. The molecular formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>16714-446-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (16714-446-01) </PackageDescription>
<NDC11Code>16714-0446-01</NDC11Code>
<ProductNDC>16714-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20240831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085968</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride, USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>16714-446-02</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (16714-446-02) </PackageDescription>
<NDC11Code>16714-0446-02</NDC11Code>
<ProductNDC>16714-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141201</StartMarketingDate>
<EndMarketingDate>20240831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085968</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20141201</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride, USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>21695-446-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (21695-446-30)</PackageDescription>
<NDC11Code>21695-0446-30</NDC11Code>
<ProductNDC>21695-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19771121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085969</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>21695-446-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (21695-446-90)</PackageDescription>
<NDC11Code>21695-0446-90</NDC11Code>
<ProductNDC>21695-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19771121</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085969</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline HCl, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless, crystalline compound which is freely soluble in water and alcohol. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each tablet for oral administration contains 10, 25, 50, 75, 100, or 150 mg amitriptyline hydrochloride. Inactive ingredients include colloidal silicon dioxide, hydroxypropyl cellulose, hydroxypropyl methylcellulose, lactose (monohydrate), magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn) and titanium dioxide. The 10 mg also includes D&C Red #27 Aluminum Lake, D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake; 25 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake; 50 mg – FD&C Blue #2 Aluminum Lake and FD&C Red #40 Aluminum Lake; 75 mg – D&C Red #7 Calcium Lake and FD&C Blue #2 Aluminum Lake; 100 mg – D&C Red #30 Aluminum Lake and D&C Yellow #10 Aluminum Lake; 150 mg – D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake and FD&C Red #40 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>25021-118-10</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-118-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>25021-0118-10</NDC11Code>
<ProductNDC>25021-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064125</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .</IndicationAndUsage>
<Description>Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-[(carbamoyloxy)methyl]-7-[[(Z)-(furan-2-yl) (methoxyimino)acetyl] amino]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.37. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-119-20</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-119-20) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0119-20</NDC11Code>
<ProductNDC>25021-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064125</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin-Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .</IndicationAndUsage>
<Description>Cefuroxime is a sterile semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-[(carbamoyloxy)methyl]-7-[[(Z)-(furan-2-yl) (methoxyimino)acetyl] amino]-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.37. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-182-66</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-182-66) > 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>25021-0182-66</NDC11Code>
<ProductNDC>25021-182</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20160901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064125</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .</IndicationAndUsage>
<Description>Cefuroxime is a semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl) acetamido] ceph-3-em-4-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>25021-183-67</NDCCode>
<PackageDescription>25 VIAL in 1 CARTON (25021-183-67) > 16 mL in 1 VIAL</PackageDescription>
<NDC11Code>25021-0183-67</NDC11Code>
<ProductNDC>25021-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Sodium</ProprietaryName>
<NonProprietaryName>Cefuroxime Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064125</ApplicationNumber>
<LabelerName>Sagent Pharmaceuticals</LabelerName>
<SubstanceName>CEFUROXIME SODIUM</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>g/16mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated organisms in the following diseases: : 1 Lower Respiratory Tract Infections, including pneumonia, caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Klebsiella spp., Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pyogenes, and Escherichia coli. , 2 Urinary Tract Infections caused by Escherichia coli and Klebsiella spp., 3 Skin and Skin Structure Infections caused by Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains), Streptococcus pyogenes, Escherichia coli, Klebsiella spp., and Enterobacter spp. , 4 Septicemia caused by Staphylococcus aureus (penicillinase- and non-penicillinase- producing strains), Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae (including ampicillin-resistant strains), and Klebsiella spp., 5 Meningitis caused by Streptococcus pneumoniae, Haemophilus influenzae (including ampicillin-resistant strains), Neisseria meningitidis, and Staphylococcus aureus (penicillinase- and non-penicillinase-producing strains). , 6 Gonorrhea: Uncomplicated and disseminated gonococcal infections due to Neisseria gonorrhoeae (penicillinase- and non-penicillinase-producing strains) in both males and females. , 7 Bone and Joint Infections caused by Staphylococcus aureus (penicillinase- and non- penicillinase-producing strains). .</IndicationAndUsage>
<Description>Cefuroxime is a semisynthetic, broad-spectrum, cephalosporin antibiotic for parenteral administration. It is the sodium salt of (6R,7R)-3-carbamoyloxymethyl-7-[Z-2-methoxyimino-2-(fur-2-yl) acetamido] ceph-3-em-4-carboxylate, and it has the following chemical structure:. The empirical formula is C16H15N4NaO8S, representing a molecular weight of 446.4. Cefuroxime for Injection, USP contains approximately 54.2 mg (2.4 mEq) of sodium per gram of cefuroxime activity. Cefuroxime for Injection, USP in sterile crystalline form is supplied in vials equivalent to 750 mg or 1.5 g of cefuroxime as cefuroxime sodium. Solutions of Cefuroxime for Injection, USP range in color from light yellow to amber, depending on the concentration and diluent used. The pH of freshly constituted solutions usually ranges from 6 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>29300-446-19</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (29300-446-19) </PackageDescription>
<NDC11Code>29300-0446-19</NDC11Code>
<ProductNDC>29300-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260803</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA219593</ApplicationNumber>
<LabelerName>Unichem Pharmaceuticals (USA), Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260803</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin capsules are indicated for. Management of neuropathic pain associated with diabetic peripheral neuropathy. Management of postherpetic neuralgia. Adjunctive therapy for the treatment of partial-onset seizures in patients 1 month of age and older. Management of fibromyalgia. Management of neuropathic pain associated with spinal cord injury.</IndicationAndUsage>
<Description>Pregabalin, USP is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is. Pregabalin, USP is a white or almost white powder with a pKa1 of 4.4 and a pKa2 of 10.1. It is sparingly soluble in water, very slightly soluble to practically insoluble in methanol, acetonitrile and practically insoluble in heptane. The log of the partition coefficient is – 1.0. Pregabalin capsules are administered orally and are supplied as imprinted hard-shell capsules containing 25 mg, 50 mg, 75 mg, 100 mg, 150 mg, 200 mg, 225 mg, and 300 mg of pregabalin, along with hydroxypropyl cellulose, mannitol, pregelatinized starch and talc as inactive ingredients. The capsule shells contain gelatin, sodium lauryl sulfate, and titanium dioxide. In addition, the 25 mg,50 mg and 300 mg capsule shells contains FD & C Yellow# 6.The 100 mg, 150 mg, 200 mg and 225 mg capsule shells contains FD & C Blue 1.The imprinting ink contains black iron oxide, potassium hydroxide, propylene glycol and shellac.</Description>
</NDC>
<NDC>
<NDCCode>30142-446-65</NDCCode>
<PackageDescription>30 BLISTER PACK in 1 CARTON (30142-446-65) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0446-65</NDC11Code>
<ProductNDC>30142-446</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief</ProprietaryName>
<NonProprietaryName>Loratadine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210604</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076011</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>LORATADINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: 1 runny nose, 2 itchy, watery eyes, 3 sneezing, 4 itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42291-446-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (42291-446-30) </PackageDescription>
<NDC11Code>42291-0446-30</NDC11Code>
<ProductNDC>42291-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207497</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug. (1.2) .</IndicationAndUsage>
<Description>Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pK a of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. USP Dissolution Test pending.</Description>
</NDC>
<NDC>
<NDCCode>46708-446-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-446-30) </PackageDescription>
<NDC11Code>46708-0446-30</NDC11Code>
<ProductNDC>46708-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090428</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
</NDC>
<NDC>
<NDCCode>46708-446-31</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (46708-446-31) </PackageDescription>
<NDC11Code>46708-0446-31</NDC11Code>
<ProductNDC>46708-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090428</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
</NDC>
<NDC>
<NDCCode>46708-446-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-446-90) </PackageDescription>
<NDC11Code>46708-0446-90</NDC11Code>
<ProductNDC>46708-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090428</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
</NDC>
<NDC>
<NDCCode>46708-446-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-446-91) </PackageDescription>
<NDC11Code>46708-0446-91</NDC11Code>
<ProductNDC>46708-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Losartan Potassium</ProprietaryName>
<NonProprietaryName>Losartan Potassium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090428</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LOSARTAN POTASSIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Losartan potassium tablet USP is an angiotensin II receptor blocker (ARB) indicated for. · Treatment of hypertension, to lower blood pressure in adults and children greater than 6 years old. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). · Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2). · Treatment of diabetic nephropathy with an elevated serum creatinine and proteinuria in patients with type 2 diabetes and a history of hypertension. (1.3).</IndicationAndUsage>
<Description>Losartan potassium is an angiotensin II receptor blocker acting on the AT1 receptor subtype. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1Htetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Losartan potassium tablets USP are available for oral administration containing either 25 mg, 50 mg or 100 mg of losartan potassium and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch, magnesium stearate, hydroxypropyl cellulose, hypromellose, titanium dioxide, D&C yellow No. 10 aluminum lake and FD&C blue No.2 aluminum lake. Losartan potassium tablets USP, 25 mg, 50 mg and 100 mg contain potassium in the following amounts: 2.12 mg (0.054 mEq), 4.24 mg (0.108 mEq) and 8.48 mg (0.216 mEq), respectively.</Description>
</NDC>
<NDC>
<NDCCode>51167-446-01</NDCCode>
<PackageDescription>4 PACKAGE in 1 CARTON (51167-446-01) / 1 KIT in 1 PACKAGE * 1 GRANULE in 1 PACKET (51167-746-07) * 1 GRANULE in 1 PACKET (51167-846-07) </PackageDescription>
<NDC11Code>51167-0446-01</NDC11Code>
<ProductNDC>51167-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trikafta</ProprietaryName>
<NonProprietaryName>Elexacaftor, Tezacaftor, And Ivacaftor</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230426</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217660</ApplicationNumber>
<LabelerName>Vertex Pharmaceuticals Incorporated</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230426</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRIKAFTA is indicated for the treatment of cystic fibrosis (CF) in adult and pediatric patients aged 2 years and older who have a clinical diagnosis of CF and who have at least one variant in the cystic fibrosis transmembrane conductance regulator (CFTR) gene that is either responsive based on clinical and/or in vitro data (see Table 6) or results in production of CFTR protein [see Clinical Pharmacology (12.1)]. If the patient's genotype is unknown, an FDA-cleared CF genetic test should be used to confirm the presence of at least one variant in the CFTR gene that is either responsive based on clinical and/or in vitro data or results in production of CFTR protein.</IndicationAndUsage>
<Description>TRIKAFTA is a co-package of elexacaftor, tezacaftor and ivacaftor fixed-dose combination tablets or granules and ivacaftor tablets or granules. Both tablets and granules are for oral administration. The elexacaftor, tezacaftor and ivacaftor fixed-dose combination tablets are available as: orange, oblong-shaped, film-coated tablet containing 100 mg of elexacaftor, 50 mg of tezacaftor, 75 mg of ivacaftor, or light orange, oblong-shaped, film-coated tablet containing 50 mg of elexacaftor, 25 mg of tezacaftor, 37.5 mg of ivacaftor. The fixed-dose combination tablet contains the following inactive ingredients: croscarmellose sodium, hypromellose, hypromellose acetate succinate, magnesium stearate, microcrystalline cellulose, and sodium lauryl sulfate. The tablet film coat contains hydroxypropyl cellulose, hypromellose, iron oxide red, iron oxide yellow, talc, and titanium dioxide. The ivacaftor tablet is available as a light blue, oblong-shaped, film-coated tablet containing 150 mg or 75 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. The tablet film coat contains carnauba wax, FD&C Blue #2, PEG 3350, polyvinyl alcohol, talc, and titanium dioxide. The printing ink contains ammonium hydroxide, iron oxide black, propylene glycol, and shellac. The elexacaftor, tezacaftor and ivacaftor fixed-dose combination oral granules are white to off-white, sweetened, unflavored granules approximately 2 mm in diameter enclosed in unit-dose packets. Each unit-dose packet contains 100 mg of elexacaftor, 50 mg of tezacaftor, 75 mg of ivacaftor or 80 mg of elexacaftor, 40 mg of tezacaftor, 60 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, mannitol, sodium lauryl sulfate, and sucralose. The ivacaftor oral granules are white to off-white, sweetened, unflavored granules approximately 2 mm in diameter enclosed in unit-dose packets. Each unit-dose packet contains 75 mg or 59.5 mg of ivacaftor and the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose acetate succinate, lactose monohydrate, magnesium stearate, mannitol, sodium lauryl sulfate, and sucralose. The active ingredients of TRIKAFTA are described below.</Description>
</NDC>
<NDC>
<NDCCode>57297-446-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (57297-446-01)</PackageDescription>
<NDC11Code>57297-0446-01</NDC11Code>
<ProductNDC>57297-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201109</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .</IndicationAndUsage>
<Description>Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-446-03</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (57297-446-03)</PackageDescription>
<NDC11Code>57297-0446-03</NDC11Code>
<ProductNDC>57297-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201109</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .</IndicationAndUsage>
<Description>Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>57297-446-13</NDCCode>
<PackageDescription>10 TABLET in 1 BLISTER PACK (57297-446-13)</PackageDescription>
<NDC11Code>57297-0446-13</NDC11Code>
<ProductNDC>57297-446</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quetiapine Fumarate</ProprietaryName>
<NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201109</ApplicationNumber>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Quetiapine fumarate tablet USP is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder manic episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2) .</IndicationAndUsage>
<Description>Quetiapine fumarate is a psychotropic agent belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2.C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine tablets USP are supplied for oral administration as 25 mg (quetiapine) round, pink tablets, 50 mg (quetiapine) round, white tablets, 100 mg (quetiapine) round, yellow tablets, 200 mg (quetiapine) round, white tablets, 300 mg (quetiapine) capsule-shaped, white tablets and 400 mg (quetiapine) capsule-shaped, yellow tablets. Inactive ingredients are dibasic calcium phosphate dihydrate, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, sodium starch glycolate and titanium dioxide. The 25 mg tablets contain iron oxide red and iron oxide black; and the 100 mg and 400 mg tablets contain iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>63187-446-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (63187-446-30) </PackageDescription>
<NDC11Code>63187-0446-30</NDC11Code>
<ProductNDC>63187-446</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Diphenhydramine Hydrochloride</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070524</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>