{
"NDC": [
{
"NDCCode": "59651-184-25",
"PackageDescription": "5 POUCH in 1 CARTON (59651-184-25) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL",
"NDC11Code": "59651-0184-25",
"ProductNDC": "59651-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211888",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).",
"Description": "Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "59651-184-30",
"PackageDescription": "6 POUCH in 1 CARTON (59651-184-30) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL",
"NDC11Code": "59651-0184-30",
"ProductNDC": "59651-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211888",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240729",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).",
"Description": "Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "59651-183-25",
"PackageDescription": "5 POUCH in 1 CARTON (59651-183-25) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL",
"NDC11Code": "59651-0183-25",
"ProductNDC": "59651-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Albuterol Sulfate",
"NonProprietaryName": "Albuterol Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20200420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211888",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ALBUTEROL SULFATE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200420",
"SamplePackage": "N",
"IndicationAndUsage": "Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).",
"Description": "Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION)."
},
{
"NDCCode": "59651-273-25",
"PackageDescription": "250 CAPSULE in 1 BOTTLE (59651-273-25) ",
"NDC11Code": "59651-0273-25",
"ProductNDC": "59651-273",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prazosin Hydrochloride",
"NonProprietaryName": "Prazosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213052",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "PRAZOSIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230331",
"SamplePackage": "N",
"IndicationAndUsage": "Prazosin hydrochloride capsules are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Prazosin hydrochloride capsules can be used alone or in combination with other antihypertensive drugs such as diuretics or beta-adrenergic blocking agents.",
"Description": "Prazosin hydrochloride, a quinazoline derivative, is the first of a new chemical class of antihypertensives. It is the hydrochloride salt of 1-(4-amino-6, 7-dimethoxy-2-quinazolinyl)-4-(2-furoyl) piperazine and its structural formula is. Molecular formula C19H21N5O4.HCl. It is a white or almost white crystalline powder, very slightly soluble in water, slightly soluble in alcohol and methanol, practically insoluble in acetone and has a molecular weight of 419.87. Each 1 mg capsule of prazosin hydrochloride USP, for oral use contains drug equivalent to 1 mg free base. Prazosin hydrochloride capsules USP contains the following inactive ingredients: corn starch, magnesium stearate, sodium lauryl sulfate, sucrose. The hard gelatin capsules contain gelatin and titanium dioxide. In addition, the 1 mg hard gelatin capsules contain D&C Yellow 10 and FD&C Yellow 6; the 2 mg hard gelatin capsules contain D&C Yellow 10, FD&C Blue 1, FD&C Red 3 and FD&C Yellow 6; the 5 mg hard gelatin capsules contains D&C Yellow 10, FD&C Blue 1, FD&C Red 3 and FD&C Yellow 6. The capsule shells are imprinted with black ink which contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "59651-339-25",
"PackageDescription": "2500 TABLET, FILM COATED in 1 BAG (59651-339-25) ",
"NDC11Code": "59651-0339-25",
"ProductNDC": "59651-339",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"StartMarketingDate": "20200501",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2021-11-18",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "01-MAY-20"
},
{
"NDCCode": "59651-548-25",
"PackageDescription": "25000 TABLET, EXTENDED RELEASE in 1 BAG (59651-548-25) ",
"NDC11Code": "59651-0548-25",
"ProductNDC": "59651-548",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"StartMarketingDate": "20240415",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2024-05-07",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "15-APR-24"
},
{
"NDCCode": "59651-562-25",
"PackageDescription": "25000 CAPSULE, DELAYED RELEASE in 1 BAG (59651-562-25) ",
"NDC11Code": "59651-0562-25",
"ProductNDC": "59651-562",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Esomeprazole Magnesium",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"StartMarketingDate": "20231120",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "ESOMEPRAZOLE MAGNESIUM TRIHYDRATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Status": "Unfinished",
"LastUpdate": "2024-12-28",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20-NOV-23"
},
{
"NDCCode": "59651-658-04",
"PackageDescription": "4 BOTTLE in 1 CARTON (59651-658-04) / 25 TABLET in 1 BOTTLE",
"NDC11Code": "59651-0658-04",
"ProductNDC": "59651-658",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20231026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217879",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2023-11-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231026",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin sublingual tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.",
"Description": "Nitroglycerin is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as calcium stearate, colloidal silicon dioxide, glyceryl monostearate, hydrophobic colloidal silica, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is:. Molecular weight: 227.09."
},
{
"NDCCode": "59651-876-25",
"PackageDescription": "25000 g in 1 BAG (59651-876-25) ",
"NDC11Code": "59651-0876-25",
"ProductNDC": "59651-876",
"ProductTypeName": "DRUG FOR FURTHER PROCESSING",
"NonProprietaryName": "Polyethylene Glycol 3350",
"DosageFormName": "POWDER, FOR SOLUTION",
"StartMarketingDate": "20240423",
"MarketingCategoryName": "DRUG FOR FURTHER PROCESSING",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "POLYETHYLENE GLYCOL 3350",
"StrengthNumber": "17",
"StrengthUnit": "g/17g",
"Status": "Unfinished",
"LastUpdate": "2025-03-26",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "23-APR-24"
},
{
"NDCCode": "59651-988-25",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (59651-988-25) / 25 mL in 1 BOTTLE, GLASS",
"NDC11Code": "59651-0988-25",
"ProductNDC": "59651-988",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycerol Phenylbutyrate",
"NonProprietaryName": "Glycerol Phenylbutyrate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20260415",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA220313",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "GLYCEROL PHENYLBUTYRATE",
"StrengthNumber": "1.1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260415",
"SamplePackage": "N",
"IndicationAndUsage": "Glycerol phenylbutyrate oral liquid is indicated for use as a nitrogen-binding agent for chronic management of patients with urea cycle disorders (UCDs) who cannot be managed by dietary protein restriction and/or amino acid supplementation alone. Glycerol phenylbutyrate oral liquid must be used with dietary protein restriction and, in some cases, dietary supplements (e.g., essential amino acids, arginine, citrulline, protein-free calorie supplements). Limitations of Use: 1 Glycerol phenylbutyrate oral liquid is not indicated for the treatment of acute hyperammonemia in patients with UCDs because more rapidly acting interventions are essential to reduce plasma ammonia levels., 2 The safety and efficacy of glycerol phenylbutyrate oral liquid for the treatment of N-acetylglutamate synthase (NAGS) deficiency has not been established.",
"Description": "Glycerol phenylbutyrate is a clear, colorless to pale yellow oral liquid. It is freely soluble in toluene and in acetone, practically insoluble in water. Glycerol phenylbutyrate is a nitrogen-binding agent. It is a triglyceride containing 3 molecules of PBA linked to a glycerol backbone, the chemical name of which is benzenebutanoic acid, 1', 1' ' –(1,2,3-propanetriyl) ester with a molecular weight of 530.67. It has a molecular formula of C33H38O6. The structural formula is."
},
{
"NDCCode": "11489-184-01",
"PackageDescription": "1 TUBE in 1 CARTON (11489-184-01) > 25 g in 1 TUBE",
"NDC11Code": "11489-0184-01",
"ProductNDC": "11489-184",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "No7 Lift And Luminate Triple Action Day Cream Spf 30",
"NonProprietaryName": "Avobenzone, Octisalate, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210915",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "BCM Ltd",
"SubstanceName": "AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": ".75; 1.25; 1.875",
"StrengthUnit": "g/25g; g/25g; g/25g",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210915",
"SamplePackage": "N",
"IndicationAndUsage": "Directions. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 months of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. Limit time in the sun, especially from 10 a.m - 2 p.m. wear long-sleeved shirts, pants, hats and sunglasses.",
"Description": "No7 already luminating LIFT & LUMINATE COLLECTION. 50 ml e 1.69 Fl. Oz. The complete regime for fresher, younger looking skin. With this collection skin will appear lifted and noticeably firmer and skin tone will be more even."
},
{
"NDCCode": "11673-185-98",
"PackageDescription": "1 KIT in 1 KIT (11673-185-98) * 42 g in 1 CONTAINER (11673-184-28) * 4.25 g in 1 CONTAINER (11673-172-58) ",
"NDC11Code": "11673-0185-98",
"ProductNDC": "11673-185",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Target Up And Up Sport Sunscreen Lip Balm Plus Stick",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "KIT",
"StartMarketingDate": "20210121",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M020",
"LabelerName": "TARGET CORPORATION",
"Status": "Deprecated",
"LastUpdate": "2024-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20210121",
"SamplePackage": "N"
},
{
"NDCCode": "12634-184-79",
"PackageDescription": "25 TABLET in 1 BOTTLE (12634-184-79)",
"NDC11Code": "12634-0184-79",
"ProductNDC": "12634-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19720522",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080292",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions.",
"Description": "Each tablet for oral administration contains. Prednisone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 mg, 5 mg, 10 mg, 20 mg. Inactive IngredientsPrednisone Tablets, USP of 2.5 mg, 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone Tablets, USP of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone Tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol."
},
{
"NDCCode": "24909-164-25",
"PackageDescription": "1 KIT in 1 PACKAGE, COMBINATION (24909-164-25) * 25 g in 1 TUBE (24909-174-25) * 75 g in 1 CARTON (24909-184-75)",
"NDC11Code": "24909-0164-25",
"ProductNDC": "24909-164",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Terrasil Rapid-clear Psoriasis",
"NonProprietaryName": "Salicylic Acid, Thuja, Sulfur",
"DosageFormName": "KIT",
"StartMarketingDate": "20140418",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part358H",
"LabelerName": "Aidance Skincare & Topical Solutions, LLC",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Relieves and helps prevent recurrence of skin: irritation; itching;redness, flaking; scaling; due to psoriasis and seborrheic dermatitis."
},
{
"NDCCode": "42507-184-25",
"PackageDescription": "250 TABLET in 1 BOTTLE (42507-184-25) ",
"NDC11Code": "42507-0184-25",
"ProductNDC": "42507-184",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Headache Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Acetaminophen, Aspirin And Caffeine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121015",
"EndMarketingDate": "20191231",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Hy-Vee",
"SubstanceName": "ACETAMINOPHEN; ASPIRIN; CAFFEINE",
"StrengthNumber": "250; 250; 65",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20121015",
"EndMarketingDatePackage": "20191231",
"SamplePackage": "N"
},
{
"NDCCode": "42973-184-01",
"PackageDescription": "25 kg in 1 DRUM (42973-184-01)",
"NDC11Code": "42973-0184-01",
"ProductNDC": "42973-184",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Trientine Hydrochloride",
"DosageFormName": "POWDER",
"StartMarketingDate": "20170712",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "APICORE PHARMACEUTICALS PRIVATE LIMITED",
"SubstanceName": "TRIENTINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "50742-184-25",
"PackageDescription": "25 TABLET in 1 BOTTLE (50742-184-25) ",
"NDC11Code": "50742-0184-25",
"ProductNDC": "50742-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leucovorin Calcium",
"NonProprietaryName": "Leucovorin Calcium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211132",
"LabelerName": "Ingenus Pharmaceuticals, LLC",
"SubstanceName": "LEUCOVORIN CALCIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Folate Analog [EPC], Folic Acid [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200730",
"SamplePackage": "N",
"Description": "Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg tablet contains 5 mg of leucovorin (equivalent to 5.4 mg of leucovorin calcium), each 10 mg tablet contains 10 mg of leucovorin (equivalent to 10.8 mg of leucovorin calcium), each 15 mg tablet contains 15 mg of leucovorin (equivalent to 16.2 mg of leucovorin calcium) and each 25 mg tablet contains 25 mg of leucovorin (equivalent to 27.01 mg of leucovorin calcium). The 5 mg, 10 mg, 15 mg and 25 mg tablets contain the following inactive ingredients: lactose monohydrate, anhydrous lactose, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. Additionally, the 15 mg and 25 mg tablets contains FD&C yellow #6."
},
{
"NDCCode": "62932-184-25",
"PackageDescription": "4 g in 1 TUBE (62932-184-25) ",
"NDC11Code": "62932-0184-25",
"ProductNDC": "62932-184",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lip Balm",
"NonProprietaryName": "Zinc Oxide Lip Balm",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181123",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Private Label Select Ltd CO",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20181123",
"SamplePackage": "N"
},
{
"NDCCode": "64220-184-08",
"PackageDescription": "25 kg in 1 DRUM (64220-184-08) ",
"NDC11Code": "64220-0184-08",
"ProductNDC": "64220-184",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Linagliptin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20140923",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Zhejiang Huahai Pharmaceutical Co., Ltd.",
"SubstanceName": "LINAGLIPTIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2022-06-23",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "23-SEP-14"
},
{
"NDCCode": "76150-184-32",
"PackageDescription": "4.25 g in 1 TUBE (76150-184-32)",
"NDC11Code": "76150-0184-32",
"ProductNDC": "76150-184",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mineral Lip Skinny Dip",
"ProprietaryNameSuffix": "Spf 30 Broad Spectrum",
"NonProprietaryName": "Sunscreen",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160401",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Bell International Laboratories, Inc.",
"SubstanceName": "ZINC OXIDE; TITANIUM DIOXIDE",
"StrengthNumber": "1.4; 2.8",
"StrengthUnit": "g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231"
},
{
"NDCCode": "0173-0859-10",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0859-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0859-10",
"ProductNDC": "0173-0859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "100; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130826",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0859-14",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0859-14) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0859-14",
"ProductNDC": "0173-0859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "100; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130826",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0859-61",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0859-61) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0859-61",
"ProductNDC": "0173-0859",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20130826",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "100; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20130826",
"EndMarketingDatePackage": "20240630",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0882-10",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0882-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0882-10",
"ProductNDC": "0173-0882",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "200; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0882-14",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0882-14) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0882-14",
"ProductNDC": "0173-0882",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "200; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0882-61",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0882-61) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER",
"NDC11Code": "00173-0882-61",
"ProductNDC": "0173-0882",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150430",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "200; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150430",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0173-0916-10",
"PackageDescription": "1 TRAY in 1 CARTON (0173-0916-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER",
"NDC11Code": "00173-0916-10",
"ProductNDC": "0173-0916",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Breo Ellipta",
"NonProprietaryName": "Fluticasone Furoate And Vilanterol Trifenatate",
"DosageFormName": "POWDER",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20230512",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204275",
"LabelerName": "GlaxoSmithKline LLC",
"SubstanceName": "FLUTICASONE FUROATE; VILANTEROL TRIFENATATE",
"StrengthNumber": "50; 25",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230512",
"SamplePackage": "N",
"IndicationAndUsage": "BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).",
"Description": "BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile."
},
{
"NDCCode": "0338-9051-12",
"PackageDescription": "12 CARTON in 1 CARTON (0338-9051-12) / 1 BAG in 1 CARTON (0338-9051-01) / 50 mL in 1 BAG",
"NDC11Code": "00338-9051-12",
"ProductNDC": "0338-9051",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Micafungin In Sodium Chloride",
"NonProprietaryName": "Micafungin In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216142",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "MICAFUNGIN SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/50mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230929",
"SamplePackage": "N",
"IndicationAndUsage": "Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].",
"Description": "Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium."
},
{
"NDCCode": "0338-9053-12",
"PackageDescription": "12 CARTON in 1 CARTON (0338-9053-12) / 1 BAG in 1 CARTON (0338-9053-01) / 100 mL in 1 BAG",
"NDC11Code": "00338-9053-12",
"ProductNDC": "0338-9053",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Micafungin In Sodium Chloride",
"NonProprietaryName": "Micafungin In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216142",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "MICAFUNGIN SODIUM",
"StrengthNumber": "100",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230929",
"SamplePackage": "N",
"IndicationAndUsage": "Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].",
"Description": "Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium."
},
{
"NDCCode": "0338-9055-10",
"PackageDescription": "10 CARTON in 1 CARTON (0338-9055-10) / 1 BAG in 1 CARTON (0338-9055-01) / 150 mL in 1 BAG",
"NDC11Code": "00338-9055-10",
"ProductNDC": "0338-9055",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Micafungin In Sodium Chloride",
"NonProprietaryName": "Micafungin In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20230929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA216142",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "MICAFUNGIN SODIUM",
"StrengthNumber": "150",
"StrengthUnit": "mg/150mL",
"Pharm_Classes": "Echinocandin Antifungal [EPC], Lipopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230929",
"SamplePackage": "N",
"IndicationAndUsage": "Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].",
"Description": "Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>59651-184-25</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (59651-184-25) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>59651-0184-25</NDC11Code>
<ProductNDC>59651-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211888</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).</IndicationAndUsage>
<Description>Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>59651-184-30</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (59651-184-30) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>59651-0184-30</NDC11Code>
<ProductNDC>59651-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211888</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).</IndicationAndUsage>
<Description>Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>59651-183-25</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (59651-183-25) / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
<NDC11Code>59651-0183-25</NDC11Code>
<ProductNDC>59651-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Albuterol Sulfate</ProprietaryName>
<NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20200420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211888</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ALBUTEROL SULFATE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).</IndicationAndUsage>
<Description>Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1 [(tert-butylamino) methyl]-4-hydroxy-m-xylene-α,α’-diol sulfate (2:1) (salt), and its established chemical structure is as follows: The molecular weight of albuterol sulfate is 576.7 and the molecular formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate USP is a white or practically white powder, freely soluble in water, slightly soluble in alcohol, in ether and practically insoluble in chloroform. The World Health Organization recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit dose vials. Each unit dose vial contains either 0.63 mg of albuterol equivalent to 0.75 mg of albuterol sulfate or 1.25 mg of albuterol equivalent to 1.5 mg of albuterol sulfate with sodium chloride and sulfuric acid in a 3-mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to 3.5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus TM nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB TM compressor, under in vitro conditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (1.25 mg strength) and 39% of albuterol (0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION).</Description>
</NDC>
<NDC>
<NDCCode>59651-273-25</NDCCode>
<PackageDescription>250 CAPSULE in 1 BOTTLE (59651-273-25) </PackageDescription>
<NDC11Code>59651-0273-25</NDC11Code>
<ProductNDC>59651-273</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prazosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Prazosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230331</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213052</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>PRAZOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230331</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prazosin hydrochloride capsules are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including this drug. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Prazosin hydrochloride capsules can be used alone or in combination with other antihypertensive drugs such as diuretics or beta-adrenergic blocking agents.</IndicationAndUsage>
<Description>Prazosin hydrochloride, a quinazoline derivative, is the first of a new chemical class of antihypertensives. It is the hydrochloride salt of 1-(4-amino-6, 7-dimethoxy-2-quinazolinyl)-4-(2-furoyl) piperazine and its structural formula is. Molecular formula C19H21N5O4.HCl. It is a white or almost white crystalline powder, very slightly soluble in water, slightly soluble in alcohol and methanol, practically insoluble in acetone and has a molecular weight of 419.87. Each 1 mg capsule of prazosin hydrochloride USP, for oral use contains drug equivalent to 1 mg free base. Prazosin hydrochloride capsules USP contains the following inactive ingredients: corn starch, magnesium stearate, sodium lauryl sulfate, sucrose. The hard gelatin capsules contain gelatin and titanium dioxide. In addition, the 1 mg hard gelatin capsules contain D&C Yellow 10 and FD&C Yellow 6; the 2 mg hard gelatin capsules contain D&C Yellow 10, FD&C Blue 1, FD&C Red 3 and FD&C Yellow 6; the 5 mg hard gelatin capsules contains D&C Yellow 10, FD&C Blue 1, FD&C Red 3 and FD&C Yellow 6. The capsule shells are imprinted with black ink which contains black iron oxide, potassium hydroxide and shellac. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>59651-339-25</NDCCode>
<PackageDescription>2500 TABLET, FILM COATED in 1 BAG (59651-339-25) </PackageDescription>
<NDC11Code>59651-0339-25</NDC11Code>
<ProductNDC>59651-339</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<StartMarketingDate>20200501</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-11-18</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-MAY-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>59651-548-25</NDCCode>
<PackageDescription>25000 TABLET, EXTENDED RELEASE in 1 BAG (59651-548-25) </PackageDescription>
<NDC11Code>59651-0548-25</NDC11Code>
<ProductNDC>59651-548</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<StartMarketingDate>20240415</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-05-07</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>15-APR-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>59651-562-25</NDCCode>
<PackageDescription>25000 CAPSULE, DELAYED RELEASE in 1 BAG (59651-562-25) </PackageDescription>
<NDC11Code>59651-0562-25</NDC11Code>
<ProductNDC>59651-562</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Esomeprazole Magnesium</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<StartMarketingDate>20231120</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>ESOMEPRAZOLE MAGNESIUM TRIHYDRATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-12-28</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20-NOV-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>59651-658-04</NDCCode>
<PackageDescription>4 BOTTLE in 1 CARTON (59651-658-04) / 25 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>59651-0658-04</NDC11Code>
<ProductNDC>59651-658</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20231026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217879</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-11-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin sublingual tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
<Description>Nitroglycerin is a stabilized sublingual compressed nitroglycerin tablet that contains 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as calcium stearate, colloidal silicon dioxide, glyceryl monostearate, hydrophobic colloidal silica, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is:. Molecular weight: 227.09.</Description>
</NDC>
<NDC>
<NDCCode>59651-876-25</NDCCode>
<PackageDescription>25000 g in 1 BAG (59651-876-25) </PackageDescription>
<NDC11Code>59651-0876-25</NDC11Code>
<ProductNDC>59651-876</ProductNDC>
<ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
<NonProprietaryName>Polyethylene Glycol 3350</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<StartMarketingDate>20240423</StartMarketingDate>
<MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>POLYETHYLENE GLYCOL 3350</SubstanceName>
<StrengthNumber>17</StrengthNumber>
<StrengthUnit>g/17g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-03-26</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>23-APR-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>59651-988-25</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (59651-988-25) / 25 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>59651-0988-25</NDC11Code>
<ProductNDC>59651-988</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycerol Phenylbutyrate</ProprietaryName>
<NonProprietaryName>Glycerol Phenylbutyrate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260415</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA220313</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>GLYCEROL PHENYLBUTYRATE</SubstanceName>
<StrengthNumber>1.1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Ammonium Ion Binding Activity [MoA], Nitrogen Binding Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glycerol phenylbutyrate oral liquid is indicated for use as a nitrogen-binding agent for chronic management of patients with urea cycle disorders (UCDs) who cannot be managed by dietary protein restriction and/or amino acid supplementation alone. Glycerol phenylbutyrate oral liquid must be used with dietary protein restriction and, in some cases, dietary supplements (e.g., essential amino acids, arginine, citrulline, protein-free calorie supplements). Limitations of Use: 1 Glycerol phenylbutyrate oral liquid is not indicated for the treatment of acute hyperammonemia in patients with UCDs because more rapidly acting interventions are essential to reduce plasma ammonia levels., 2 The safety and efficacy of glycerol phenylbutyrate oral liquid for the treatment of N-acetylglutamate synthase (NAGS) deficiency has not been established.</IndicationAndUsage>
<Description>Glycerol phenylbutyrate is a clear, colorless to pale yellow oral liquid. It is freely soluble in toluene and in acetone, practically insoluble in water. Glycerol phenylbutyrate is a nitrogen-binding agent. It is a triglyceride containing 3 molecules of PBA linked to a glycerol backbone, the chemical name of which is benzenebutanoic acid, 1', 1' ' –(1,2,3-propanetriyl) ester with a molecular weight of 530.67. It has a molecular formula of C33H38O6. The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>11489-184-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11489-184-01) > 25 g in 1 TUBE</PackageDescription>
<NDC11Code>11489-0184-01</NDC11Code>
<ProductNDC>11489-184</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>No7 Lift And Luminate Triple Action Day Cream Spf 30</ProprietaryName>
<NonProprietaryName>Avobenzone, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210915</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>BCM Ltd</LabelerName>
<SubstanceName>AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>.75; 1.25; 1.875</StrengthNumber>
<StrengthUnit>g/25g; g/25g; g/25g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Directions. apply liberally 15 minutes before sun exposure. reapply at least every 2 hours. use a water resistant sunscreen if swimming or sweating. children under 6 months of age: Ask a doctor. Sun Protection Measures. Spending time in the sun increases your risk of skin cancer and early skin aging. To decrease this risk, regularly use a sunscreen with a Broad Spectrum SPF value of 15 or higher and other sun protection measures including. Limit time in the sun, especially from 10 a.m - 2 p.m. wear long-sleeved shirts, pants, hats and sunglasses.</IndicationAndUsage>
<Description>No7 already luminating LIFT & LUMINATE COLLECTION. 50 ml e 1.69 Fl. Oz. The complete regime for fresher, younger looking skin. With this collection skin will appear lifted and noticeably firmer and skin tone will be more even.</Description>
</NDC>
<NDC>
<NDCCode>11673-185-98</NDCCode>
<PackageDescription>1 KIT in 1 KIT (11673-185-98) * 42 g in 1 CONTAINER (11673-184-28) * 4.25 g in 1 CONTAINER (11673-172-58) </PackageDescription>
<NDC11Code>11673-0185-98</NDC11Code>
<ProductNDC>11673-185</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Target Up And Up Sport Sunscreen Lip Balm Plus Stick</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20210121</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>TARGET CORPORATION</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>12634-184-79</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (12634-184-79)</PackageDescription>
<NDC11Code>12634-0184-79</NDC11Code>
<ProductNDC>12634-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19720522</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080292</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions.</IndicationAndUsage>
<Description>Each tablet for oral administration contains. Prednisone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 mg, 5 mg, 10 mg, 20 mg. Inactive IngredientsPrednisone Tablets, USP of 2.5 mg, 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc. Prednisone Tablets, USP of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate. Prednisone Tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
</NDC>
<NDC>
<NDCCode>24909-164-25</NDCCode>
<PackageDescription>1 KIT in 1 PACKAGE, COMBINATION (24909-164-25) * 25 g in 1 TUBE (24909-174-25) * 75 g in 1 CARTON (24909-184-75)</PackageDescription>
<NDC11Code>24909-0164-25</NDC11Code>
<ProductNDC>24909-164</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Terrasil Rapid-clear Psoriasis</ProprietaryName>
<NonProprietaryName>Salicylic Acid, Thuja, Sulfur</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140418</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part358H</ApplicationNumber>
<LabelerName>Aidance Skincare & Topical Solutions, LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Relieves and helps prevent recurrence of skin: irritation; itching;redness, flaking; scaling; due to psoriasis and seborrheic dermatitis.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42507-184-25</NDCCode>
<PackageDescription>250 TABLET in 1 BOTTLE (42507-184-25) </PackageDescription>
<NDC11Code>42507-0184-25</NDC11Code>
<ProductNDC>42507-184</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Headache Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen, Aspirin And Caffeine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121015</StartMarketingDate>
<EndMarketingDate>20191231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Hy-Vee</LabelerName>
<SubstanceName>ACETAMINOPHEN; ASPIRIN; CAFFEINE</SubstanceName>
<StrengthNumber>250; 250; 65</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20121015</StartMarketingDatePackage>
<EndMarketingDatePackage>20191231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>42973-184-01</NDCCode>
<PackageDescription>25 kg in 1 DRUM (42973-184-01)</PackageDescription>
<NDC11Code>42973-0184-01</NDC11Code>
<ProductNDC>42973-184</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Trientine Hydrochloride</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20170712</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>APICORE PHARMACEUTICALS PRIVATE LIMITED</LabelerName>
<SubstanceName>TRIENTINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>50742-184-25</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (50742-184-25) </PackageDescription>
<NDC11Code>50742-0184-25</NDC11Code>
<ProductNDC>50742-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leucovorin Calcium</ProprietaryName>
<NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211132</ApplicationNumber>
<LabelerName>Ingenus Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Leucovorin is a racemic mixture of the 5-formyl derivative of tetrahydrofolic acid. The biologically active compound of the mixture is the (-)-L-Levoisomer, known as Citrovorum factor, or (-)-folinic acid or levoleucovorin. Leucovorin is a water soluble form of reduced folate in the folate group. The chemical name of leucovorin, a folate analog, is the calcium salt of N-[4-[[(2-amino-5-formyl-1,4,5,6,7,8-hexahydro-4-oxo-6-pteridinyl)methyl] amino]benzoyl]-L-glutamic acid. The molecular formula is C20H21CaN7O7 and the molecular weight is 511.51 g/mol. The structural formula of leucovorin calcium is. Leucovorin calcium tablets, USP are for oral administration. Each 5 mg tablet contains 5 mg of leucovorin (equivalent to 5.4 mg of leucovorin calcium), each 10 mg tablet contains 10 mg of leucovorin (equivalent to 10.8 mg of leucovorin calcium), each 15 mg tablet contains 15 mg of leucovorin (equivalent to 16.2 mg of leucovorin calcium) and each 25 mg tablet contains 25 mg of leucovorin (equivalent to 27.01 mg of leucovorin calcium). The 5 mg, 10 mg, 15 mg and 25 mg tablets contain the following inactive ingredients: lactose monohydrate, anhydrous lactose, microcrystalline cellulose, croscarmellose sodium, colloidal silicon dioxide, magnesium stearate. Additionally, the 15 mg and 25 mg tablets contains FD&C yellow #6.</Description>
</NDC>
<NDC>
<NDCCode>62932-184-25</NDCCode>
<PackageDescription>4 g in 1 TUBE (62932-184-25) </PackageDescription>
<NDC11Code>62932-0184-25</NDC11Code>
<ProductNDC>62932-184</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lip Balm</ProprietaryName>
<NonProprietaryName>Zinc Oxide Lip Balm</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181123</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Private Label Select Ltd CO</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64220-184-08</NDCCode>
<PackageDescription>25 kg in 1 DRUM (64220-184-08) </PackageDescription>
<NDC11Code>64220-0184-08</NDC11Code>
<ProductNDC>64220-184</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Linagliptin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20140923</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Zhejiang Huahai Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>LINAGLIPTIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2022-06-23</LastUpdate>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>23-SEP-14</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>76150-184-32</NDCCode>
<PackageDescription>4.25 g in 1 TUBE (76150-184-32)</PackageDescription>
<NDC11Code>76150-0184-32</NDC11Code>
<ProductNDC>76150-184</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mineral Lip Skinny Dip</ProprietaryName>
<ProprietaryNameSuffix>Spf 30 Broad Spectrum</ProprietaryNameSuffix>
<NonProprietaryName>Sunscreen</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Bell International Laboratories, Inc.</LabelerName>
<SubstanceName>ZINC OXIDE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>1.4; 2.8</StrengthNumber>
<StrengthUnit>g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0173-0859-10</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0859-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0859-10</NDC11Code>
<ProductNDC>0173-0859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0859-14</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0859-14) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0859-14</NDC11Code>
<ProductNDC>0173-0859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130826</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0859-61</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0859-61) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0859-61</NDC11Code>
<ProductNDC>0173-0859</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20130826</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>100; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130826</StartMarketingDatePackage>
<EndMarketingDatePackage>20240630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0882-10</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0882-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0882-10</NDC11Code>
<ProductNDC>0173-0882</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0882-14</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0882-14) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0882-14</NDC11Code>
<ProductNDC>0173-0882</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0882-61</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0882-61) / 1 INHALER in 1 TRAY / 14 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0882-61</NDC11Code>
<ProductNDC>0173-0882</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150430</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150430</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0173-0916-10</NDCCode>
<PackageDescription>1 TRAY in 1 CARTON (0173-0916-10) / 1 INHALER in 1 TRAY / 30 POWDER in 1 INHALER</PackageDescription>
<NDC11Code>00173-0916-10</NDC11Code>
<ProductNDC>0173-0916</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Breo Ellipta</ProprietaryName>
<NonProprietaryName>Fluticasone Furoate And Vilanterol Trifenatate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20230512</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204275</ApplicationNumber>
<LabelerName>GlaxoSmithKline LLC</LabelerName>
<SubstanceName>FLUTICASONE FUROATE; VILANTEROL TRIFENATATE</SubstanceName>
<StrengthNumber>50; 25</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BREO ELLIPTA is a combination of fluticasone furoate, a corticosteroid, and vilanterol, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of patients with chronic obstructive pulmonary disease (COPD). (1.1), 2 the maintenance treatment of asthma in patients aged 5 years and older. (1.2).</IndicationAndUsage>
<Description>BREO ELLIPTA is an inhalation powder drug product for delivery of a combination of fluticasone furoate (an ICS) and vilanterol (a LABA) to patients by oral inhalation. Fluticasone furoate, a synthetic trifluorinated corticosteroid, has the chemical name (6α,11β,16α,17α)-6,9-difluoro-17-{[(fluoro-methyl)thio]carbonyl}-11-hydroxy-16-methyl-3-oxoandrosta-1,4-dien-17-yl 2-furancarboxylate and the following chemical structure. Fluticasone furoate is a white powder with a molecular weight of 538.6, and the empirical formula is C27H29F3O6S. It is practically insoluble in water. Vilanterol trifenatate has the chemical name triphenylacetic acid-4-{(1R)-2-[(6-{2-[2,6-dicholorobenzyl)oxy]ethoxy}hexyl)amino]-1-hydroxyethyl}-2-(hydroxymethyl)phenol (1:1) and the following chemical structure. Vilanterol trifenatate is a white powder with a molecular weight of 774.8, and the empirical formula is C24H33Cl2NO5C20H16O2. It is practically insoluble in water. BREO ELLIPTA is a light grey and pale blue plastic inhaler containing 2 foil blister strips. Each blister on one strip contains a white powder blend of micronized fluticasone furoate (50, 100, or 200 mcg) and lactose monohydrate (12.5, 12.4 or 12.3 mg, respectively), and each blister on the other strip contains a white powder blend of micronized vilanterol trifenatate (40 mcg equivalent to 25 mcg of vilanterol), magnesium stearate (125 mcg), and lactose monohydrate (12.34 mg). The lactose monohydrate contains milk proteins. After the inhaler is activated, the powder within both blisters is exposed and ready for dispersion into the airstream created by the patient inhaling through the mouthpiece. Under standardized in vitro test conditions, BREO ELLIPTA delivers 46, 92 or 184 mcg of fluticasone furoate and 22 mcg of vilanterol per dose when tested at a flow rate of 60 L/min for 4 seconds. In adult patients with obstructive lung disease and severely compromised lung function (COPD with FEV1/FVC <70% and FEV1 <30% predicted or FEV1 <50% predicted plus chronic respiratory failure), mean peak inspiratory flow through the ELLIPTA inhaler was 66.5 L/min (range: 43.5 to 81.0 L/min). In adult patients with severe asthma, mean peak inspiratory flow through the ELLIPTA inhaler was 96.6 L/min (range: 72.4 to 124.6 L/min). In pediatric patients with asthma aged 5 to 11 years, mean peak inspiratory flow through the ELLIPTA inhaler was 60.6 L/min (range: 36.3 to 82.5 L/min). The actual amount of drug delivered to the lung will depend on patient factors, such as inspiratory flow profile.</Description>
</NDC>
<NDC>
<NDCCode>0338-9051-12</NDCCode>
<PackageDescription>12 CARTON in 1 CARTON (0338-9051-12) / 1 BAG in 1 CARTON (0338-9051-01) / 50 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9051-12</NDC11Code>
<ProductNDC>0338-9051</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Micafungin In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Micafungin In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216142</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/50mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].</IndicationAndUsage>
<Description>Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0338-9053-12</NDCCode>
<PackageDescription>12 CARTON in 1 CARTON (0338-9053-12) / 1 BAG in 1 CARTON (0338-9053-01) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9053-12</NDC11Code>
<ProductNDC>0338-9053</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Micafungin In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Micafungin In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216142</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].</IndicationAndUsage>
<Description>Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium.</Description>
</NDC>
<NDC>
<NDCCode>0338-9055-10</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (0338-9055-10) / 1 BAG in 1 CARTON (0338-9055-01) / 150 mL in 1 BAG</PackageDescription>
<NDC11Code>00338-9055-10</NDC11Code>
<ProductNDC>0338-9055</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Micafungin In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Micafungin In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20230929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA216142</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>MICAFUNGIN SODIUM</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/150mL</StrengthUnit>
<Pharm_Classes>Echinocandin Antifungal [EPC], Lipopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Micafungin in Sodium Chloride Injection is indicated for: 1 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.1) and Use in Specific Populations (8.4)]., 2 Treatment of Candidemia, Acute Disseminated Candidiasis, Candida Peritonitis and Abscesses without meningoencephalitis and/or ocular dissemination in pediatric patients younger than 4 months of age for whom appropriate dosing with this formulation can be achieved [see Use in Specific Populations (8.4)]., 3 Treatment of Esophageal Candidiasis in adult and pediatric patients 4 months of age and older for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.2)]., 4 Prophylaxis of Candida Infections in adult and pediatric patients 4 months of age and older undergoing hematopoietic stem cell transplantation for whom appropriate dosing with this formulation can be achieved [see Clinical Studies (14.3)].</IndicationAndUsage>
<Description>Micafungin in Sodium Chloride Injection is a premixed, iso-osmotic, sterile, nonpyrogenic solution for intravenous (IV) infusion that contains micafungin sodium. Micafungin sodium is a semisynthetic lipopeptide (echinocandin). Micafungin in Sodium Chloride Injection is supplied as a refrigerated 50 mL, 100 mL, or 150 mL single-dose GALAXY container in the following presentations. 50 mg/50 mL (1 mg/mL): containing 50 mg of micafungin (equivalent to 50.87 mg of micafungin sodium); 36 mg citric acid, anhydrous; 450 mg sodium chloride; 92 mg sodium citrate dihydrate;. 100 mg/100 mL (1 mg/mL): containing 100 mg of micafungin (equivalent to 101.73 mg of micafungin sodium); 72 mg citric acid, anhydrous; 900 mg sodium chloride; 184 mg sodium citrate dihydrate;. 150 mg/150 mL (1 mg/mL): containing 150 mg of micafungin (equivalent to 152.60 mg of micafungin sodium); 108 mg citric acid, anhydrous; 1350 mg sodium chloride; 276 mg sodium citrate dihydrate. : 1 Each 50 mg/50 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 200 mg of sodium., 2 Each 100 mg/100 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 400 mg of sodium., 3 Each 150 mg/150 mL Galaxy container of Micafungin in Sodium Chloride Injection contains 600 mg of sodium.</Description>
</NDC>
</NDCList>