{
"NDC": [
{
"NDCCode": "59676-040-56",
"PackageDescription": "1 BOTTLE in 1 CARTON (59676-040-56) / 56 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "59676-0040-56",
"ProductNDC": "59676-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balversa",
"NonProprietaryName": "Erdafitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212018",
"LabelerName": "Janssen Products LP",
"SubstanceName": "ERDAFITINIB",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .",
"Description": "Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only)."
},
{
"NDCCode": "59676-040-28",
"PackageDescription": "1 BOTTLE in 1 CARTON (59676-040-28) / 28 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "59676-0040-28",
"ProductNDC": "59676-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balversa",
"NonProprietaryName": "Erdafitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212018",
"LabelerName": "Janssen Products LP",
"SubstanceName": "ERDAFITINIB",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .",
"Description": "Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only)."
},
{
"NDCCode": "59676-030-56",
"PackageDescription": "1 BOTTLE in 1 CARTON (59676-030-56) / 56 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "59676-0030-56",
"ProductNDC": "59676-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balversa",
"NonProprietaryName": "Erdafitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212018",
"LabelerName": "Janssen Products LP",
"SubstanceName": "ERDAFITINIB",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .",
"Description": "Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only)."
},
{
"NDCCode": "59676-600-56",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (59676-600-56) / 28 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "59676-0600-56",
"ProductNDC": "59676-600",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erleada",
"NonProprietaryName": "Apalutamide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180214",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210951",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "APALUTAMIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-07-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190401",
"SamplePackage": "Y",
"IndicationAndUsage": "ERLEADA is indicated for the treatment of patients with: 1 Metastatic castration-sensitive prostate cancer (mCSPC), 2 Non-metastatic castration-resistant prostate cancer (nmCRPC).",
"Description": "Apalutamide, the active ingredient of ERLEADA, is an androgen receptor inhibitor. Each ERLEADA tablet contains either 60 mg or 240 mg of apalutamide. The chemical name is (4-[7-(6-Cyano-5-trifluoromethylpyridin-3-yl)-8-oxo-6-thioxo-5,7-diazaspiro[3.4]oct-5-yl]-2-fluoro-N-methylbenzamide). Apalutamide is a white to slightly yellow powder. Apalutamide is practically insoluble in aqueous media over a wide range of pH values. The molecular weight is 477.44 and molecular formula is C21H15F4N5O2S. The structural formula is. ERLEADA® (apalutamide) tablets are available in 240 mg tablets and 60 mg tablets with the following inactive ingredients: 1 240 mg film-coated tablets: colloidal anhydrous silica, croscarmellose sodium, hydroxypropyl methylcellulose-acetate succinate, silicified microcrystalline cellulose, and magnesium stearate. The coating contains glyceryl monocaprylocaprate, iron oxide black, polyvinyl alcohol, talc, titanium dioxide, and vinyl alcohol grafted copolymer., 2 60 mg film-coated tablets: colloidal anhydrous silica, croscarmellose sodium, hydroxypropyl methylcellulose-acetate succinate, magnesium stearate, microcrystalline cellulose, and silicified microcrystalline cellulose. The coating contains iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide."
},
{
"NDCCode": "11086-040-15",
"PackageDescription": "1 TUBE in 1 BOX (11086-040-15) > 56.7 g in 1 TUBE (11086-040-05) ",
"NDC11Code": "11086-0040-15",
"ProductNDC": "11086-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple",
"ProprietaryNameSuffix": "Af",
"NonProprietaryName": "Miconazole Nitrate",
"DosageFormName": "PASTE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131030",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part333C",
"LabelerName": "Summers Laboratories Inc",
"SubstanceName": "MICONAZOLE NITRATE",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2019-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20131030",
"SamplePackage": "N"
},
{
"NDCCode": "16864-040-02",
"PackageDescription": "1 TUBE in 1 CARTON (16864-040-02) / 56.7 g in 1 TUBE",
"NDC11Code": "16864-0040-02",
"ProductNDC": "16864-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple Antifungal",
"NonProprietaryName": "Miconazole Nitrate",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20210901",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M005",
"LabelerName": "Advantice Health, LLC",
"SubstanceName": "MICONAZOLE NITRATE",
"StrengthNumber": "2",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Azole Antifungal [EPC], Azoles [CS]",
"Status": "Active",
"LastUpdate": "2026-03-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210901",
"SamplePackage": "N",
"IndicationAndUsage": "For the treatment of superficial skin infections caused by yeast (Candida albicans). Relieves discomfort, irrit.ation, redness and chafing associated with jock itch. Cures most jock itch (tinea cruris)."
},
{
"NDCCode": "52862-040-31",
"PackageDescription": "56.6 g in 1 BOTTLE, PLASTIC (52862-040-31) ",
"NDC11Code": "52862-0040-31",
"ProductNDC": "52862-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Health Smart Vaporizing Chest Rub",
"NonProprietaryName": "Menthol And Camphor And Eucalyptus Oil",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131001",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Home Smart Products",
"SubstanceName": "CAMPHOR (SYNTHETIC); EUCALYPTUS OIL; MENTHOL",
"StrengthNumber": "4.7; 1.2; 1.25",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2025-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20200801",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: 1 On chest and throat, helps temporarily relieve cough as may occur with common cold and minor bronchial irritation., 2 For the temporary relief of pain associated with minor skin irritation."
},
{
"NDCCode": "54162-040-56",
"PackageDescription": "56 g in 1 TUBE (54162-040-56) ",
"NDC11Code": "54162-0040-56",
"ProductNDC": "54162-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zinc Oxide 20%",
"NonProprietaryName": "Zinc Oxide",
"DosageFormName": "OINTMENT",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180917",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "GERITREX LLC",
"SubstanceName": "ZINC OXIDE",
"StrengthNumber": ".2",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180917",
"SamplePackage": "N",
"IndicationAndUsage": "helps treat and prevent diaper rash. Protects chafed skin due to diaper rash and helps seal out wetness. dries the oozing and weeping of, poison ivy, poison oak and poison sumac."
},
{
"NDCCode": "70934-040-56",
"PackageDescription": "56 CAPSULE in 1 BOTTLE, PLASTIC (70934-040-56) ",
"NDC11Code": "70934-0040-56",
"ProductNDC": "70934-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20171030",
"EndMarketingDate": "20250731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090836",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20191014",
"EndMarketingDatePackage": "20250731",
"SamplePackage": "N",
"IndicationAndUsage": "Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).",
"Description": "Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg."
},
{
"NDCCode": "74955-040-01",
"PackageDescription": "56 PACKAGE in 1 PACKET (74955-040-01) > 4 mL in 1 PACKAGE",
"NDC11Code": "74955-0040-01",
"ProductNDC": "74955-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naturally Antibacterial Wet Wipes",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "CLOTH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200905",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "COSMOLIVE KOZMETIK SANAYI VE TICARET ANONIM SIRKETI",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200905",
"SamplePackage": "N",
"IndicationAndUsage": " Decreases bacteria on skin."
},
{
"NDCCode": "59676-030-84",
"PackageDescription": "1 BOTTLE in 1 CARTON (59676-030-84) / 84 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "59676-0030-84",
"ProductNDC": "59676-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balversa",
"NonProprietaryName": "Erdafitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212018",
"LabelerName": "Janssen Products LP",
"SubstanceName": "ERDAFITINIB",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .",
"Description": "Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only)."
},
{
"NDCCode": "59676-050-28",
"PackageDescription": "1 BOTTLE in 1 CARTON (59676-050-28) / 28 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "59676-0050-28",
"ProductNDC": "59676-050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Balversa",
"NonProprietaryName": "Erdafitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190412",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212018",
"LabelerName": "Janssen Products LP",
"SubstanceName": "ERDAFITINIB",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190412",
"SamplePackage": "N",
"IndicationAndUsage": "BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .",
"Description": "Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only)."
},
{
"NDCCode": "72092-040-02",
"PackageDescription": "5 POUCH in 1 CARTON (72092-040-02) > 28 mL in 1 POUCH (72092-040-01) ",
"NDC11Code": "72092-0040-02",
"ProductNDC": "72092-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Vita Solu Tion Mask",
"NonProprietaryName": "Niacinamide, Adenosine",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180102",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Racce Co., Ltd.",
"SubstanceName": "NIACINAMIDE; ADENOSINE",
"StrengthNumber": ".56; .01",
"StrengthUnit": "g/28mL; g/28mL",
"Status": "Deprecated",
"LastUpdate": "2019-03-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180102",
"SamplePackage": "N"
},
{
"NDCCode": "72729-040-02",
"PackageDescription": "5 POUCH in 1 CARTON (72729-040-02) > 28 g in 1 POUCH (72729-040-01) ",
"NDC11Code": "72729-0040-02",
"ProductNDC": "72729-040",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Skin Project Ya Cooling Celluven Mask",
"NonProprietaryName": "Niacinamide",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181001",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Woorhi Mechatronics Co., Ltd.",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": ".56",
"StrengthUnit": "g/28g",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N",
"IndicationAndUsage": "■ This brightening sheet mask coated by Biocellulose adds high moisturizing and cooling to tired skin. ■ Helps moisturize dehydrated skin. ■ Helps improve the brightness skin tone."
},
{
"NDCCode": "82293-040-10",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (82293-040-10) ",
"NDC11Code": "82293-0040-10",
"ProductNDC": "82293-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213611",
"LabelerName": "Novugen Pharma (USA) LLC",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20270430",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow."
},
{
"NDCCode": "82293-040-20",
"PackageDescription": "180 TABLET, FILM COATED in 1 BOTTLE (82293-040-20) ",
"NDC11Code": "82293-0040-20",
"ProductNDC": "82293-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213611",
"LabelerName": "Novugen Pharma (USA) LLC",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20270430",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow."
},
{
"NDCCode": "82293-040-30",
"PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (82293-040-30) / 10 TABLET, FILM COATED in 1 BLISTER PACK (82293-040-31) ",
"NDC11Code": "82293-0040-30",
"ProductNDC": "82293-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sacubitril And Valsartan",
"NonProprietaryName": "Sacubitril And Valsartan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250716",
"EndMarketingDate": "20270430",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213611",
"LabelerName": "Novugen Pharma (USA) LLC",
"SubstanceName": "SACUBITRIL; VALSARTAN",
"StrengthNumber": "97; 103",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250716",
"EndMarketingDatePackage": "20270430",
"SamplePackage": "N",
"Description": "Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow."
},
{
"NDCCode": "59676-101-01",
"PackageDescription": "5 AMPULE in 1 CARTON (59676-101-01) > 5 mL in 1 AMPULE (59676-101-00)",
"NDC11Code": "59676-0101-01",
"ProductNDC": "59676-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Okt3",
"NonProprietaryName": "Muromonab-cd3",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19860719",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103463",
"LabelerName": "Centocor Ortho Biotech Products, L.P.",
"SubstanceName": "MUROMONAB-CD3",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "CD3 Blocker Immunosuppressant [EPC],CD3 Receptor Antagonists [MoA],CD3-directed Antibody Interactions [MoA],Decreased Immunologic Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-11-16"
},
{
"NDCCode": "59676-201-01",
"PackageDescription": "7 VIAL, SINGLE-USE in 1 CASE (59676-201-01) > 10 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "59676-0201-01",
"ProductNDC": "59676-201",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Leustatin",
"NonProprietaryName": "Cladribine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19930301",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020229",
"LabelerName": "Janssen Products, L.P.",
"SubstanceName": "CLADRIBINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Purine Antimetabolite [EPC]",
"Status": "Deprecated",
"LastUpdate": "2014-09-12"
},
{
"NDCCode": "59676-225-07",
"PackageDescription": "7 CAPSULE in 1 BOTTLE (59676-225-07)",
"NDC11Code": "59676-0225-07",
"ProductNDC": "59676-225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olysio",
"NonProprietaryName": "Simeprevir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20131122",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205123",
"LabelerName": "Janssen Products LP",
"SubstanceName": "SIMEPREVIR",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis C Virus NS3/4A Protease Inhibitor [EPC],HCV NS3/4A Protease Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-05-31"
},
{
"NDCCode": "59676-225-28",
"PackageDescription": "28 CAPSULE in 1 BOTTLE (59676-225-28) ",
"NDC11Code": "59676-0225-28",
"ProductNDC": "59676-225",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olysio",
"NonProprietaryName": "Simeprevir",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20131122",
"EndMarketingDate": "20180525",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205123",
"LabelerName": "Janssen Products LP",
"SubstanceName": "SIMEPREVIR",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Hepatitis C Virus NS3/4A Protease Inhibitor [EPC],HCV NS3/4A Protease Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20131122",
"EndMarketingDatePackage": "20180525",
"SamplePackage": "N"
},
{
"NDCCode": "59676-278-01",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (59676-278-01) ",
"NDC11Code": "59676-0278-01",
"ProductNDC": "59676-278",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edurant",
"NonProprietaryName": "Rilpivirine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110520",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202022",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "RILPIVIRINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110520",
"SamplePackage": "N",
"IndicationAndUsage": "EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .",
"Description": "EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with \"TMC\" on one side and \"PED\" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate."
},
{
"NDCCode": "59676-280-90",
"PackageDescription": "9 BLISTER PACK in 1 CARTON (59676-280-90) / 10 TABLET, FOR SUSPENSION in 1 BLISTER PACK (59676-280-01) ",
"NDC11Code": "59676-0280-90",
"ProductNDC": "59676-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edurant Ped",
"NonProprietaryName": "Rilpivirine Hydrochloride",
"DosageFormName": "TABLET, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20240315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219016",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "RILPIVIRINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240315",
"SamplePackage": "N",
"IndicationAndUsage": "EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .",
"Description": "EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with \"TMC\" on one side and \"PED\" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate."
},
{
"NDCCode": "59676-302-01",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (59676-302-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-302-00) ",
"NDC11Code": "59676-0302-01",
"ProductNDC": "59676-302",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "2000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-303-01",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (59676-303-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-303-00) ",
"NDC11Code": "59676-0303-01",
"ProductNDC": "59676-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "3000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-304-01",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (59676-304-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-304-00) ",
"NDC11Code": "59676-0304-01",
"ProductNDC": "59676-304",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "4000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-310-01",
"PackageDescription": "6 VIAL, SINGLE-DOSE in 1 CARTON (59676-310-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-310-00) ",
"NDC11Code": "59676-0310-01",
"ProductNDC": "59676-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "10000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-310-02",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (59676-310-02) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-310-00) ",
"NDC11Code": "59676-0310-02",
"ProductNDC": "59676-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "10000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-312-04",
"PackageDescription": "4 VIAL, MULTI-DOSE in 1 CARTON (59676-312-04) / 2 mL in 1 VIAL, MULTI-DOSE (59676-312-00) ",
"NDC11Code": "59676-0312-04",
"ProductNDC": "59676-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "10000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
},
{
"NDCCode": "59676-320-04",
"PackageDescription": "4 VIAL, MULTI-DOSE in 1 CARTON (59676-320-04) / 1 mL in 1 VIAL, MULTI-DOSE (59676-320-00) ",
"NDC11Code": "59676-0320-04",
"ProductNDC": "59676-320",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Procrit",
"NonProprietaryName": "Erythropoietin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19890601",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA103234",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "EPOETIN",
"StrengthNumber": "20000",
"StrengthUnit": "[iU]/mL",
"Pharm_Classes": "Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]",
"Status": "Active",
"LastUpdate": "2025-04-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19890601",
"SamplePackage": "N",
"IndicationAndUsage": "PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .",
"Description": "Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3)."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>59676-040-56</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59676-040-56) / 56 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59676-0040-56</NDC11Code>
<ProductNDC>59676-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balversa</ProprietaryName>
<NonProprietaryName>Erdafitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212018</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>ERDAFITINIB</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .</IndicationAndUsage>
<Description>Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only).</Description>
</NDC>
<NDC>
<NDCCode>59676-040-28</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59676-040-28) / 28 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59676-0040-28</NDC11Code>
<ProductNDC>59676-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balversa</ProprietaryName>
<NonProprietaryName>Erdafitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212018</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>ERDAFITINIB</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .</IndicationAndUsage>
<Description>Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only).</Description>
</NDC>
<NDC>
<NDCCode>59676-030-56</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59676-030-56) / 56 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59676-0030-56</NDC11Code>
<ProductNDC>59676-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balversa</ProprietaryName>
<NonProprietaryName>Erdafitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212018</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>ERDAFITINIB</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .</IndicationAndUsage>
<Description>Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only).</Description>
</NDC>
<NDC>
<NDCCode>59676-600-56</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (59676-600-56) / 28 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>59676-0600-56</NDC11Code>
<ProductNDC>59676-600</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erleada</ProprietaryName>
<NonProprietaryName>Apalutamide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180214</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210951</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>APALUTAMIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-07-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190401</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ERLEADA is indicated for the treatment of patients with: 1 Metastatic castration-sensitive prostate cancer (mCSPC), 2 Non-metastatic castration-resistant prostate cancer (nmCRPC).</IndicationAndUsage>
<Description>Apalutamide, the active ingredient of ERLEADA, is an androgen receptor inhibitor. Each ERLEADA tablet contains either 60 mg or 240 mg of apalutamide. The chemical name is (4-[7-(6-Cyano-5-trifluoromethylpyridin-3-yl)-8-oxo-6-thioxo-5,7-diazaspiro[3.4]oct-5-yl]-2-fluoro-N-methylbenzamide). Apalutamide is a white to slightly yellow powder. Apalutamide is practically insoluble in aqueous media over a wide range of pH values. The molecular weight is 477.44 and molecular formula is C21H15F4N5O2S. The structural formula is. ERLEADA® (apalutamide) tablets are available in 240 mg tablets and 60 mg tablets with the following inactive ingredients: 1 240 mg film-coated tablets: colloidal anhydrous silica, croscarmellose sodium, hydroxypropyl methylcellulose-acetate succinate, silicified microcrystalline cellulose, and magnesium stearate. The coating contains glyceryl monocaprylocaprate, iron oxide black, polyvinyl alcohol, talc, titanium dioxide, and vinyl alcohol grafted copolymer., 2 60 mg film-coated tablets: colloidal anhydrous silica, croscarmellose sodium, hydroxypropyl methylcellulose-acetate succinate, magnesium stearate, microcrystalline cellulose, and silicified microcrystalline cellulose. The coating contains iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>11086-040-15</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (11086-040-15) > 56.7 g in 1 TUBE (11086-040-05) </PackageDescription>
<NDC11Code>11086-0040-15</NDC11Code>
<ProductNDC>11086-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple</ProprietaryName>
<ProprietaryNameSuffix>Af</ProprietaryNameSuffix>
<NonProprietaryName>Miconazole Nitrate</NonProprietaryName>
<DosageFormName>PASTE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131030</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part333C</ApplicationNumber>
<LabelerName>Summers Laboratories Inc</LabelerName>
<SubstanceName>MICONAZOLE NITRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131030</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16864-040-02</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16864-040-02) / 56.7 g in 1 TUBE</PackageDescription>
<NDC11Code>16864-0040-02</NDC11Code>
<ProductNDC>16864-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple Antifungal</ProprietaryName>
<NonProprietaryName>Miconazole Nitrate</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20210901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M005</ApplicationNumber>
<LabelerName>Advantice Health, LLC</LabelerName>
<SubstanceName>MICONAZOLE NITRATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC], Azoles [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the treatment of superficial skin infections caused by yeast (Candida albicans). Relieves discomfort, irrit.ation, redness and chafing associated with jock itch. Cures most jock itch (tinea cruris).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52862-040-31</NDCCode>
<PackageDescription>56.6 g in 1 BOTTLE, PLASTIC (52862-040-31) </PackageDescription>
<NDC11Code>52862-0040-31</NDC11Code>
<ProductNDC>52862-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Health Smart Vaporizing Chest Rub</ProprietaryName>
<NonProprietaryName>Menthol And Camphor And Eucalyptus Oil</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131001</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Home Smart Products</LabelerName>
<SubstanceName>CAMPHOR (SYNTHETIC); EUCALYPTUS OIL; MENTHOL</SubstanceName>
<StrengthNumber>4.7; 1.2; 1.25</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200801</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: 1 On chest and throat, helps temporarily relieve cough as may occur with common cold and minor bronchial irritation., 2 For the temporary relief of pain associated with minor skin irritation.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54162-040-56</NDCCode>
<PackageDescription>56 g in 1 TUBE (54162-040-56) </PackageDescription>
<NDC11Code>54162-0040-56</NDC11Code>
<ProductNDC>54162-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zinc Oxide 20%</ProprietaryName>
<NonProprietaryName>Zinc Oxide</NonProprietaryName>
<DosageFormName>OINTMENT</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180917</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>GERITREX LLC</LabelerName>
<SubstanceName>ZINC OXIDE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps treat and prevent diaper rash. Protects chafed skin due to diaper rash and helps seal out wetness. dries the oozing and weeping of, poison ivy, poison oak and poison sumac.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>70934-040-56</NDCCode>
<PackageDescription>56 CAPSULE in 1 BOTTLE, PLASTIC (70934-040-56) </PackageDescription>
<NDC11Code>70934-0040-56</NDC11Code>
<ProductNDC>70934-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20171030</StartMarketingDate>
<EndMarketingDate>20250731</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090836</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20191014</StartMarketingDatePackage>
<EndMarketingDatePackage>20250731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cephalexin is a cephalosporin antibacterial drug indicated for the treatment of the following infections caused by susceptible isolates of designated bacteria. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, Cephalexin should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. (1.6).</IndicationAndUsage>
<Description>Cephalexin capsules, USP is a semisynthetic cephalosporin antibacterial drug intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16 H 17 N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula:. Each capsule contains cephalexin monohydrate equivalent to 250 mg, 333 mg, 500 mg, or 750 mg of cephalexin. The 250 mg, 333 mg, 500 mg and 750 mg capsules contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, FD & C Blue No. 1, D & C Yellow No. 10, gelatin, sodium lauryl sulphate, titanium dioxide. In addition, the 250 mg capsule contains FD & C Red No. 40; 333 mg and 750 mg Capsules contains FD & C Yellow No. 6. The imprinting ink contains; shellac, propylene glycol, strong ammonia solution and potassium hydroxide. Also black Iron oxide is used in 250mg, 333mg and 500mg and titanium dioxide is used in 750mg.</Description>
</NDC>
<NDC>
<NDCCode>74955-040-01</NDCCode>
<PackageDescription>56 PACKAGE in 1 PACKET (74955-040-01) > 4 mL in 1 PACKAGE</PackageDescription>
<NDC11Code>74955-0040-01</NDC11Code>
<ProductNDC>74955-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naturally Antibacterial Wet Wipes</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>CLOTH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200905</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>COSMOLIVE KOZMETIK SANAYI VE TICARET ANONIM SIRKETI</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> Decreases bacteria on skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59676-030-84</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59676-030-84) / 84 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59676-0030-84</NDC11Code>
<ProductNDC>59676-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balversa</ProprietaryName>
<NonProprietaryName>Erdafitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212018</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>ERDAFITINIB</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .</IndicationAndUsage>
<Description>Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only).</Description>
</NDC>
<NDC>
<NDCCode>59676-050-28</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (59676-050-28) / 28 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>59676-0050-28</NDC11Code>
<ProductNDC>59676-050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Balversa</ProprietaryName>
<NonProprietaryName>Erdafitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190412</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212018</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>ERDAFITINIB</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Fibroblast Growth Factor Receptor Inhibitors [MoA], Kinase Inhibitor [EPC], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190412</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BALVERSA is indicated for the treatment of adult patients with locally advanced or metastatic urothelial carcinoma (mUC) with susceptible FGFR3 genetic alterations whose disease has progressed on or after at least one line of prior systemic therapy. Select patients for therapy based on an FDA-approved companion diagnostic for BALVERSA [see Dosage and Administration (2.1) and Clinical Studies (14.1)] .</IndicationAndUsage>
<Description>Erdafitinib, the active ingredient in BALVERSA, is a kinase inhibitor. The chemical name is N-(3,5-dimethoxyphenyl)-N'-(1-methylethyl)-N-[3-(1-methyl-1H-pyrazol-4-yl)quinoxalin-6-yl]ethane-1,2-diamine. Erdafitinib is a yellow powder. It is practically insoluble, or insoluble to freely soluble in organic solvents, and slightly soluble to practically insoluble, or insoluble in aqueous media over a wide range of pH values. The molecular formula is C 25H 30N 6O 2and molecular weight is 446.56. Chemical structure of erdafitinib is as follows. BALVERSA ®(erdafitinib) tablets are supplied as 3 mg, 4 mg or 5 mg film-coated tablets for oral administration and contains the following inactive ingredients:. Tablet Core: Croscarmellose sodium, Magnesium stearate (from vegetable source), Mannitol, Meglumine, and Microcrystalline Cellulose. Film Coating: (Opadry amb II): Glycerol monocaprylocaprate Type I, Polyvinyl alcohol-partially hydrolyzed, Sodium lauryl sulfate, Talc, Titanium dioxide, Iron oxide yellow, Iron oxide red (for the orange and brown tablets only), Ferrosoferric oxide/iron oxide black (for the brown tablets only).</Description>
</NDC>
<NDC>
<NDCCode>72092-040-02</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (72092-040-02) > 28 mL in 1 POUCH (72092-040-01) </PackageDescription>
<NDC11Code>72092-0040-02</NDC11Code>
<ProductNDC>72092-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Vita Solu Tion Mask</ProprietaryName>
<NonProprietaryName>Niacinamide, Adenosine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180102</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Racce Co., Ltd.</LabelerName>
<SubstanceName>NIACINAMIDE; ADENOSINE</SubstanceName>
<StrengthNumber>.56; .01</StrengthNumber>
<StrengthUnit>g/28mL; g/28mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-03-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>72729-040-02</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (72729-040-02) > 28 g in 1 POUCH (72729-040-01) </PackageDescription>
<NDC11Code>72729-0040-02</NDC11Code>
<ProductNDC>72729-040</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Skin Project Ya Cooling Celluven Mask</ProprietaryName>
<NonProprietaryName>Niacinamide</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181001</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Woorhi Mechatronics Co., Ltd.</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>.56</StrengthNumber>
<StrengthUnit>g/28g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■ This brightening sheet mask coated by Biocellulose adds high moisturizing and cooling to tired skin. ■ Helps moisturize dehydrated skin. ■ Helps improve the brightness skin tone.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>82293-040-10</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (82293-040-10) </PackageDescription>
<NDC11Code>82293-0040-10</NDC11Code>
<ProductNDC>82293-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213611</ApplicationNumber>
<LabelerName>Novugen Pharma (USA) LLC</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20270430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>82293-040-20</NDCCode>
<PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE (82293-040-20) </PackageDescription>
<NDC11Code>82293-0040-20</NDC11Code>
<ProductNDC>82293-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213611</ApplicationNumber>
<LabelerName>Novugen Pharma (USA) LLC</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20270430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>82293-040-30</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 BOX, UNIT-DOSE (82293-040-30) / 10 TABLET, FILM COATED in 1 BLISTER PACK (82293-040-31) </PackageDescription>
<NDC11Code>82293-0040-30</NDC11Code>
<ProductNDC>82293-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
<NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250716</StartMarketingDate>
<EndMarketingDate>20270430</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213611</ApplicationNumber>
<LabelerName>Novugen Pharma (USA) LLC</LabelerName>
<SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
<StrengthNumber>97; 103</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250716</StartMarketingDatePackage>
<EndMarketingDatePackage>20270430</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Sacubitril and valsartan tablets are a combination of sacubitril sodium, a neprilysin inhibitor and valsartan disodium, an angiotensin II receptor blocker. Sacubitril sodium is a white to almost white powder and freely soluble in methanol and water, and practically insoluble in acetone. The chemical name of sacubitril sodium is 4-(((2S,4R)-1-([1,1'-biphenyl]-4-yl)-5-ethoxy-4-methyl-5-oxopentan-2-yl)amino)-4-oxobutanoic acid sodium. The molecular formula is C 24H 28NO 5·Na and its molecular weight is 433.48. Its structural formula is:. Valsartan disodium is a white to almost white powder and freely soluble in water and anhydrous ethanol, and almost insoluble in dichloromethane. The chemical name of valsartan disodium is L-Valine, N-(1-oxopentyl)-N-[[2′-(2H-tetrazol-5-yl)[1,1′-biphenyl]-4-yl]methyl]-, sodium salt trihydrate (1:2:3). The molecular formula is C 24H 33N 5Na 2O 6and its molecular weight is 533.54. Its structural formula is:. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril equivalent to 25.6 mg of sacubitril sodium and 26 mg of valsartan equivalent to 28.3 mg of valsartan disodium; 49 mg of sacubitril equivalent to 51.2 mg of sacubitril sodium and 51 mg of valsartan equivalent to 56.6 mg of valsartan disodium; and 97 mg of sacubitril equivalent to 102.4 mg of sacubitril sodium and 103 mg of valsartan equivalent to 113.2 mg of valsartan disodium. The tablet inactive ingredients are colloidal silicon dioxide, crospovidone, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, and talc. The film-coat inactive ingredients are glycerol esters of fatty acids, polyvinyl alcohol-part hydrolysed, sodium lauryl sulfate, talc, and titanium dioxide. The film-coat for the 49 mg of sacubitril and 51 mg of valsartan tablet also contains iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>59676-101-01</NDCCode>
<PackageDescription>5 AMPULE in 1 CARTON (59676-101-01) > 5 mL in 1 AMPULE (59676-101-00)</PackageDescription>
<NDC11Code>59676-0101-01</NDC11Code>
<ProductNDC>59676-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Okt3</ProprietaryName>
<NonProprietaryName>Muromonab-cd3</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19860719</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103463</ApplicationNumber>
<LabelerName>Centocor Ortho Biotech Products, L.P.</LabelerName>
<SubstanceName>MUROMONAB-CD3</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>CD3 Blocker Immunosuppressant [EPC],CD3 Receptor Antagonists [MoA],CD3-directed Antibody Interactions [MoA],Decreased Immunologic Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-16</LastUpdate>
</NDC>
<NDC>
<NDCCode>59676-201-01</NDCCode>
<PackageDescription>7 VIAL, SINGLE-USE in 1 CASE (59676-201-01) > 10 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>59676-0201-01</NDC11Code>
<ProductNDC>59676-201</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Leustatin</ProprietaryName>
<NonProprietaryName>Cladribine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19930301</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020229</ApplicationNumber>
<LabelerName>Janssen Products, L.P.</LabelerName>
<SubstanceName>CLADRIBINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Purine Antimetabolite [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-09-12</LastUpdate>
</NDC>
<NDC>
<NDCCode>59676-225-07</NDCCode>
<PackageDescription>7 CAPSULE in 1 BOTTLE (59676-225-07)</PackageDescription>
<NDC11Code>59676-0225-07</NDC11Code>
<ProductNDC>59676-225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olysio</ProprietaryName>
<NonProprietaryName>Simeprevir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131122</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205123</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>SIMEPREVIR</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis C Virus NS3/4A Protease Inhibitor [EPC],HCV NS3/4A Protease Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-05-31</LastUpdate>
</NDC>
<NDC>
<NDCCode>59676-225-28</NDCCode>
<PackageDescription>28 CAPSULE in 1 BOTTLE (59676-225-28) </PackageDescription>
<NDC11Code>59676-0225-28</NDC11Code>
<ProductNDC>59676-225</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olysio</ProprietaryName>
<NonProprietaryName>Simeprevir</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131122</StartMarketingDate>
<EndMarketingDate>20180525</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205123</ApplicationNumber>
<LabelerName>Janssen Products LP</LabelerName>
<SubstanceName>SIMEPREVIR</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis C Virus NS3/4A Protease Inhibitor [EPC],HCV NS3/4A Protease Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20131122</StartMarketingDatePackage>
<EndMarketingDatePackage>20180525</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59676-278-01</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (59676-278-01) </PackageDescription>
<NDC11Code>59676-0278-01</NDC11Code>
<ProductNDC>59676-278</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edurant</ProprietaryName>
<NonProprietaryName>Rilpivirine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110520</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202022</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>RILPIVIRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .</IndicationAndUsage>
<Description>EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with "TMC" on one side and "PED" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>59676-280-90</NDCCode>
<PackageDescription>9 BLISTER PACK in 1 CARTON (59676-280-90) / 10 TABLET, FOR SUSPENSION in 1 BLISTER PACK (59676-280-01) </PackageDescription>
<NDC11Code>59676-0280-90</NDC11Code>
<ProductNDC>59676-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edurant Ped</ProprietaryName>
<NonProprietaryName>Rilpivirine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219016</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>RILPIVIRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .</IndicationAndUsage>
<Description>EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with "TMC" on one side and "PED" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>59676-302-01</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (59676-302-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-302-00) </PackageDescription>
<NDC11Code>59676-0302-01</NDC11Code>
<ProductNDC>59676-302</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>2000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-303-01</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (59676-303-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-303-00) </PackageDescription>
<NDC11Code>59676-0303-01</NDC11Code>
<ProductNDC>59676-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>3000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-304-01</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (59676-304-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-304-00) </PackageDescription>
<NDC11Code>59676-0304-01</NDC11Code>
<ProductNDC>59676-304</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>4000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-310-01</NDCCode>
<PackageDescription>6 VIAL, SINGLE-DOSE in 1 CARTON (59676-310-01) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-310-00) </PackageDescription>
<NDC11Code>59676-0310-01</NDC11Code>
<ProductNDC>59676-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-310-02</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (59676-310-02) / 1 mL in 1 VIAL, SINGLE-DOSE (59676-310-00) </PackageDescription>
<NDC11Code>59676-0310-02</NDC11Code>
<ProductNDC>59676-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-312-04</NDCCode>
<PackageDescription>4 VIAL, MULTI-DOSE in 1 CARTON (59676-312-04) / 2 mL in 1 VIAL, MULTI-DOSE (59676-312-00) </PackageDescription>
<NDC11Code>59676-0312-04</NDC11Code>
<ProductNDC>59676-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
<NDC>
<NDCCode>59676-320-04</NDCCode>
<PackageDescription>4 VIAL, MULTI-DOSE in 1 CARTON (59676-320-04) / 1 mL in 1 VIAL, MULTI-DOSE (59676-320-00) </PackageDescription>
<NDC11Code>59676-0320-04</NDC11Code>
<ProductNDC>59676-320</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Procrit</ProprietaryName>
<NonProprietaryName>Erythropoietin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19890601</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA103234</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>EPOETIN</SubstanceName>
<StrengthNumber>20000</StrengthNumber>
<StrengthUnit>[iU]/mL</StrengthUnit>
<Pharm_Classes>Erythropoiesis-stimulating Agent [EPC], Erythropoietin [CS], Increased Erythroid Cell Production [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19890601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PROCRIT is an erythropoiesis-stimulating agent (ESA) indicated for: 1 Treatment of anemia due to Chronic Kidney Disease (CKD) in patients on dialysis and not on dialysis ( 1.1). Zidovudine in patients with Human Immunodeficiency Virus (HIV) infection ( 1.2). The effects of concomitant myelosuppressive chemotherapy, and upon initiation, there is a minimum of two additional months of planned chemotherapy ( 1.3). , 2 Reduction of allogeneic red blood cell (RBC) transfusions in patients undergoing elective, noncardiac, nonvascular surgery ( 1.4). .</IndicationAndUsage>
<Description>Epoetin alfa is a 165-amino acid erythropoiesis-stimulating glycoprotein manufactured by recombinant DNA technology. It has a molecular weight of approximately 30,400 daltons and is produced by mammalian cells into which the human erythropoietin gene has been introduced. The product contains the identical amino acid sequence of isolated natural erythropoietin. PROCRIT (epoetin alfa) injection for intravenous or subcutaneous administration is formulated as a sterile, clear, colorless liquid in vials in multiple formulations. Single-dose vials, formulated with an isotonic sodium chloride/sodium citrate-buffered solution, are supplied in multiple strengths. Each single-dose 1 mL vial contains 2,000, 3,000, 4,000, or 10,000 Units of epoetin alfa, Albumin (Human) (2.5 mg), citric acid (0.06 mg), sodium chloride (5.9 mg), and sodium citrate (5.8 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Single-dose 1 mL vials formulated with an isotonic sodium chloride/sodium phosphate buffer contain 40,000 Units of epoetin alfa albumin (human) (2.5 mg), citric acid (0.0068 mg), sodium chloride (5.8 mg), sodium citrate (0.7 mg), sodium phosphate dibasic anhydrate (1.8 mg), and sodium phosphate monobasic monohydrate (1.2 mg) in Water for Injection, USP (pH 6.9 ± 0.3). Multiple-dose, 2 mL vials contain 10,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg) per 1 mL Water for Injection, USP (pH 6.1 ± 0.3). Multiple-dose 1 mL vials contain 20,000 Units epoetin alfa, albumin (human) (2.5 mg), benzyl alcohol (1%), sodium chloride (8.2 mg), citric acid (0.11 mg), and sodium citrate (1.3 mg), per 1 mL in Water for Injection, USP (pH 6.1 ± 0.3).</Description>
</NDC>
</NDCList>