{
"NDC": [
{
"NDCCode": "59676-280-90",
"PackageDescription": "9 BLISTER PACK in 1 CARTON (59676-280-90) / 10 TABLET, FOR SUSPENSION in 1 BLISTER PACK (59676-280-01) ",
"NDC11Code": "59676-0280-90",
"ProductNDC": "59676-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edurant Ped",
"NonProprietaryName": "Rilpivirine Hydrochloride",
"DosageFormName": "TABLET, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20240315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219016",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "RILPIVIRINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240315",
"SamplePackage": "N",
"IndicationAndUsage": "EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .",
"Description": "EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with \"TMC\" on one side and \"PED\" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate."
},
{
"NDCCode": "10370-280-09",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (10370-280-09) ",
"NDC11Code": "10370-0280-09",
"ProductNDC": "10370-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dutasteride And Tamsulosin Hydrochloride",
"NonProprietaryName": "Dutasteride And Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20151118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202509",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "DUTASTERIDE; TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".5; .4",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA], Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151118",
"SamplePackage": "N",
"IndicationAndUsage": "Dutasteride and tamsulosin hydrochloride capsules are a combination of dutasteride, a 5-alpha-reductase inhibitor, and tamsulosin, an alpha-adrenergic antagonist, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate. (1.1). Limitations of Use: Dutasteride-containing products, including dutasteride and tamsulosin hydrochloride capsules, are not approved for the prevention of prostate cancer. (1.2).",
"Description": "Dutasteride and tamsulosin hydrochloride capsules contain dutasteride (a selective inhibitor of both the type 1 and type 2 isoforms of steroid 5 alpha-reductase, an intracellular enzyme that converts testosterone to DHT and tamsulosin (an antagonist of alpha1A-adrenoceptors in the prostate). Each dutasteride and tamsulosin hydrochloride capsule contains the following: 1 One dutasteride oblong, opaque, yellow gelatin capsule, containing 0.5 mg of dutasteride dissolved in a mixture of butylated hydroxytoluene and mono-and di-glycerides of caprylic/capric acid. The inactive ingredients in the soft-gelatin capsule shell are ferric oxide (yellow), gelatin (from certified BSE-free bovine sources), glycerin, titanium dioxide, lecithin, medium chain triglycerides, propylene glycol, iron oxide black, polyvinyl acetate phthalate, macrogol, and ammonium hydroxide., 2 Tamsulosin hydrochloride white to off-white pellets, containing 0.4 mg tamsulosin hydrochloride and the inactive ingredients: methacrylic acid copolymer, sugar sphere, ethylcellulose, polyethylene glycol, triethyl citrate and talc."
},
{
"NDCCode": "21695-280-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (21695-280-90)",
"NDC11Code": "21695-0280-90",
"ProductNDC": "21695-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"NonProprietaryName": "Propoxyphene Napsylate And Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20091201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074119",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN",
"StrengthNumber": "100; 650",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-01-10",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.",
"Description": "Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone."
},
{
"NDCCode": "33342-280-10",
"PackageDescription": "90 TABLET in 1 BOTTLE (33342-280-10) ",
"NDC11Code": "33342-0280-10",
"ProductNDC": "33342-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207292",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "10; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241016",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and valsartan tablets, USP are the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure: In patients not adequately controlled on monotherapy (1) As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1). Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.",
"Description": "Amlodipine and valsartan tablets, USP are a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: Its molecular formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is: Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets, USP are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, (6.9 mg or 13.9 mg, equivalent to 5 mg or 10 mg of amlodipine respectively) with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients of all strengths of the tablets are microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Additionally the 5/320 mg and 10/320 mg strengths contain ferric oxide yellow. The film coating contains hypromellose, polyethylene glycol, talc, titanium dioxide, iron oxide yellow. Additionally the 5/320 mg and 10/160 mg contain iron oxide red. Meets USP Dissolution Test 3."
},
{
"NDCCode": "42291-280-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (42291-280-90) ",
"NDC11Code": "42291-0280-90",
"ProductNDC": "42291-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Finasteride",
"NonProprietaryName": "Finasteride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130226",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076511",
"LabelerName": "AvKARE, Inc.",
"SubstanceName": "FINASTERIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "5-alpha Reductase Inhibitor [EPC],5-alpha Reductase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-06-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20130226",
"SamplePackage": "N"
},
{
"NDCCode": "43063-280-90",
"PackageDescription": "90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43063-280-90)",
"NDC11Code": "43063-0280-90",
"ProductNDC": "43063-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19870501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074769",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2018-04-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "46708-280-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (46708-280-90) ",
"NDC11Code": "46708-0280-90",
"ProductNDC": "46708-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20140609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202949",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20140609",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults , 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30 and 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ascorbic acid, FD&C Blue No. 2, gelatin, hypromellose, hypromellose phthalate, talc, titanium dioxide, triethyl citrate, sodium lauryl sulfate, sucrose and sugar spheres. The 20 and 60 mg capsules also contain iron oxide yellow. Ink contains following ingredients. 20 mg: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. 30 mg: FD&C Blue No. 2 Aluminum Lake, propylene glycol, shellac, strong ammonia solution, titanium dioxide and yellow iron oxide. 60 mg: potassium hydroxide, propylene glycol, shellac, strong ammonia solution and titanium dioxide."
},
{
"NDCCode": "51655-280-26",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51655-280-26) ",
"NDC11Code": "51655-0280-26",
"ProductNDC": "51655-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"ProprietaryNameSuffix": "Delayed Release",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20221026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075185",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221206",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals ( see WARNINGS; Gastrointestinal Bleeding, Ulceration, and Perforation). Diclofenac is indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.",
"Description": "Diclofenac sodium delayed-release tablets is a benzene-acetic acid derivative. Diclofenac sodium is a white or slightly yellowish crystalline powder and is sparingly soluble in water at 25°C. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula. The inactive ingredients in diclofenac sodium delayed-release tablets include: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, sodium starch glycolate, talc, titanium dioxide, triethyl citrate and ink fine black."
},
{
"NDCCode": "59651-280-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (59651-280-90) ",
"NDC11Code": "59651-0280-90",
"ProductNDC": "59651-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine",
"NonProprietaryName": "Duloxetine Hydrochloride",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20131211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090778",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131211",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults and pediatric patients 13 years of age and older , 5 Chronic musculoskeletal pain in adults .",
"Description": "Duloxetine delayed-release capsules are selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, or 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include crospovidone, hydroxy propyl cellulose, hypromellose, hypromellose phthalate, sugar spheres, talc, titanium dioxide, and triethylcitrate. The empty hard gelatin capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 20 mg and 60 mg contain FD&C Blue No. 2 and iron oxide yellow and 30 mg contains FD&C Blue No. 2. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "59746-280-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (59746-280-90) ",
"NDC11Code": "59746-0280-90",
"ProductNDC": "59746-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Escitalopram",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202280",
"LabelerName": "Jubilant Cadista Pharmaceuticals Inc.",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120912",
"SamplePackage": "N"
},
{
"NDCCode": "60760-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (60760-280-90)",
"NDC11Code": "60760-0280-90",
"ProductNDC": "60760-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20101224",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079153",
"LabelerName": "St Marys Medical Park Pharmacy",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-12-20",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "61786-280-19",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (61786-280-19)",
"NDC11Code": "61786-0280-19",
"ProductNDC": "61786-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150429",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200292",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-11-15",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "62332-280-90",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62332-280-90) ",
"NDC11Code": "62332-0280-90",
"ProductNDC": "62332-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Duloxetine Hydrochloride",
"NonProprietaryName": "Duloxetine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260409",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202949",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DULOXETINE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260409",
"SamplePackage": "N",
"IndicationAndUsage": "Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.",
"Description": "Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30 and 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ascorbic acid, FD&C Blue No. 2, gelatin, hypromellose, hypromellose phthalate, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. The 20 and 60 mg capsules also contain iron oxide yellow. Ink contains following ingredients. 20 mg: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. 30 mg: FD&C Blue No. 2 Aluminum Lake, propylene glycol, shellac, strong ammonia solution, titanium dioxide and yellow iron oxide. 60 mg: potassium hydroxide, propylene glycol, shellac, strong ammonia solution and titanium dioxide."
},
{
"NDCCode": "62856-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (62856-280-90) ",
"NDC11Code": "62856-0280-90",
"ProductNDC": "62856-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fycompa",
"NonProprietaryName": "Perampanel",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20121022",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202834",
"LabelerName": "Eisai Inc.",
"SubstanceName": "PERAMPANEL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "AMPA Receptor Antagonists [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Noncompetitive AMPA Glutamate Receptor Antagonist [EPC], UGT1A9 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2026-01-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20121022",
"SamplePackage": "N",
"IndicationAndUsage": "FYCOMPA, a non-competitive AMPA glutamate receptor antagonist, is indicated for: 1 Treatment of partial-onset seizures with or without secondarily generalized seizures in patients with epilepsy 4 years of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients with epilepsy 12 years of age and older (1.2).",
"Description": "FYCOMPA tablets and oral suspension contain perampanel, a non-competitive AMPA receptor antagonist, as a 4:3 hydrate. The chemical name of the active ingredient is 2-(1′,6′-dihydro-6′-oxo-1′-phenyl[2,3′-bipyridin]-5′-yl)-benzonitrile, hydrate (4:3). The molecular formula is C23H15N3O ¾H2O and the molecular weight is 362.90 (349.39 for anhydrous perampanel). It is a white to yellowish white powder. It is freely soluble in 1-methyl-2-pyrrolidinone, sparingly soluble in acetonitrile and acetone, slightly soluble in methanol, ethanol and ethyl acetate, very slightly soluble in 1-octanol and diethyl ether, and practically insoluble in heptane and water. The chemical structure is. Tablets. FYCOMPA tablets are round, bi-convex, film-coated tablets containing 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of perampanel. Tablets contain the following inactive ingredients: lactose monohydrate, low substituted hydroxypropyl cellulose, povidone, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, talc, and titanium dioxide. Tablets of different strengths may contain yellow ferric oxide (10 mg and 2 mg), red ferric oxide (2 mg, 4 mg, 6 mg, 8 mg), black ferric oxide (8 mg), and FD&C Blue No. 2 (indigo carmine) aluminum lake (10 mg and 12 mg). Oral Suspension. FYCOMPA oral suspension is a white to off-white opaque liquid providing perampanel in a concentration of 0.5 mg/mL. The oral suspension contains the following inactive ingredients: sorbitol, microcrystalline cellulose, carboxymethyl-cellulose sodium, poloxamer, simethicone, citric acid, sodium benzoate and purified water."
},
{
"NDCCode": "63187-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE, PLASTIC (63187-280-90) ",
"NDC11Code": "63187-0280-90",
"ProductNDC": "63187-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Baclofen",
"NonProprietaryName": "Baclofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20051201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077241",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-05-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140501",
"SamplePackage": "N",
"IndicationAndUsage": "Baclofen is useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.",
"Description": "Baclofen USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(-4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate."
},
{
"NDCCode": "65162-280-09",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-280-09) ",
"NDC11Code": "65162-0280-09",
"ProductNDC": "65162-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paliperidone",
"NonProprietaryName": "Paliperidone",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190924",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204707",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "PALIPERIDONE",
"StrengthNumber": "1.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190924",
"SamplePackage": "N",
"Description": "Paliperidone extended-release tablets contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone, USP contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white), 6 mg (light beige), and 9 mg (pink) strengths. Inactive ingredients are colloidal silicon dioxide, fumaric acid, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene oxides, povidone, talc and triethyl citrate. The 1.5 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. The 6 mg tablets also contain iron oxide red and iron oxide yellow. The 9 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. Delivery System Components and Performance. Paliperidone extended-release tablets use a hydrophilic matrix core and pH dependent enteric coating to deliver paliperidone, USP at a controlled rate. The delivery system consists of an inner core composed of the drug, rate controlling polymers and other excipients. The core is coated with multiple layers comprising of delayed release polymer and a drug layering polymer system. Each tablet strength has a different colored coating. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible overcoat erodes quickly. The combination of the coating layers ensures an initial drug release, while delaying exposure of the matrix core. Upon attaining the intended pH, the delayed release coating dissolves, the hydrophilic polymers of the core hydrate and swell forming a gel like barrier that regulates the rate at which the drug is released from the tablet, ensuring a steady and prolonged delivery."
},
{
"NDCCode": "68382-280-16",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (68382-280-16) ",
"NDC11Code": "68382-0280-16",
"ProductNDC": "68382-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203000",
"LabelerName": "Zydus Pharmaceuticals (USA) Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "160; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200212",
"SamplePackage": "N"
},
{
"NDCCode": "69616-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (69616-280-90) ",
"NDC11Code": "69616-0280-90",
"ProductNDC": "69616-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fycompa",
"NonProprietaryName": "Perampanel",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20240102",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202834",
"LabelerName": "Catalyst Pharmaceuticals, Inc.",
"SubstanceName": "PERAMPANEL",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "AMPA Receptor Antagonists [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Noncompetitive AMPA Glutamate Receptor Antagonist [EPC], UGT1A9 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]",
"DEASchedule": "CIII",
"Status": "Active",
"LastUpdate": "2024-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240102",
"SamplePackage": "N",
"Description": "FYCOMPA tablets and oral suspension contain perampanel, a non-competitive AMPA receptor antagonist, as a 4:3 hydrate. The chemical name of the active ingredient is 2-(1′,6′-dihydro-6′-oxo-1′-phenyl[2,3′-bipyridin]-5′-yl)-benzonitrile, hydrate (4:3). The molecular formula is C23H15N3O ¾H2O and the molecular weight is 362.90 (349.39 for anhydrous perampanel). It is a white to yellowish white powder. It is freely soluble in 1-methyl-2-pyrrolidinone, sparingly soluble in acetonitrile and acetone, slightly soluble in methanol, ethanol and ethyl acetate, very slightly soluble in 1-octanol and diethyl ether, and practically insoluble in heptane and water. The chemical structure is. Tablets. FYCOMPA tablets are round, bi-convex, film-coated tablets containing 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of perampanel. Tablets contain the following inactive ingredients: lactose monohydrate, low substituted hydroxypropyl cellulose, povidone, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, talc, and titanium dioxide. Tablets of different strengths may contain yellow ferric oxide (10 mg and 2 mg), red ferric oxide (2 mg, 4 mg, 6 mg, 8 mg), black ferric oxide (8 mg), and FD&C Blue No. 2 (indigo carmine) aluminum lake (10 mg and 12 mg). Oral Suspension. FYCOMPA oral suspension is a white to off-white opaque liquid providing perampanel in a concentration of 0.5 mg/mL. The oral suspension contains the following inactive ingredients: sorbitol, microcrystalline cellulose, carboxymethyl-cellulose sodium, poloxamer, simethicone, citric acid, sodium benzoate and purified water."
},
{
"NDCCode": "71205-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (71205-280-90) ",
"NDC11Code": "71205-0280-90",
"ProductNDC": "71205-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Buspirone Hydrochloride",
"NonProprietaryName": "Buspirone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180703",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209696",
"LabelerName": "Proficient Rx LP",
"SubstanceName": "BUSPIRONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2020-04-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190601",
"SamplePackage": "N",
"IndicationAndUsage": "Buspirone hydrochloride tablets are indicated for the management of anxiety disorder or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling \"on edge,\" irritability, impatience.",
"Description": "Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone Hydrochloride Tablets are for oral administration, contains 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are functionally-scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are functionally-scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are functionally-scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one- third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate."
},
{
"NDCCode": "71610-280-60",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71610-280-60) ",
"NDC11Code": "71610-0280-60",
"ProductNDC": "71610-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091672",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190522",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .",
"Description": "The active ingredient in omeprazole delayed-release capsules USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for omeprazole delayed-release capsules USP, 10 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 40 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide and potassium hydroxide."
},
{
"NDCCode": "72189-280-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (72189-280-90) ",
"NDC11Code": "72189-0280-90",
"ProductNDC": "72189-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cyclobenzaprine Hydrochloride",
"NonProprietaryName": "Cyclobenzaprine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20211007",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213324",
"LabelerName": "DirectRx",
"SubstanceName": "CYCLOBENZAPRINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20211007",
"SamplePackage": "N",
"IndicationAndUsage": "Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.",
"Description": "Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Image Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide."
},
{
"NDCCode": "76420-280-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (76420-280-90) ",
"NDC11Code": "76420-0280-90",
"ProductNDC": "76420-280",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140612",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076343",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]",
"Status": "Active",
"LastUpdate": "2022-09-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220909",
"SamplePackage": "N",
"IndicationAndUsage": "Topiramate tablets are indicated for: : 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older ( 1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets USP are available as 25 mg, 50 mg, and 100 mg circular tablets and 200 mg capsule shaped tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di- O-isopropylidene-ß-D-fructopyranose sulfamate and has the following structural formula:. Each tablet, for oral administration, contains 25 mg, 50 mg, 100 mg and 200 mg topiramate and has the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide. In addition, the 25 mg also contains FD&C Blue#2; the 50 mg and 100 mg also contain red iron oxide and yellow iron oxide; and the 200 mg also contains red iron oxide."
},
{
"NDCCode": "59676-575-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (59676-575-30) ",
"NDC11Code": "59676-0575-30",
"ProductNDC": "59676-575",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prezcobix",
"NonProprietaryName": "Darunavir Ethanolate And Cobicistat",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205395",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "DARUNAVIR ETHANOLATE; COBICISTAT",
"StrengthNumber": "800; 150",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150131",
"SamplePackage": "N",
"IndicationAndUsage": "PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].",
"Description": "PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide."
},
{
"NDCCode": "59676-577-30",
"PackageDescription": "30 TABLET, FOR SUSPENSION in 1 BOTTLE (59676-577-30) ",
"NDC11Code": "59676-0577-30",
"ProductNDC": "59676-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prezcobix Ped",
"NonProprietaryName": "Darunavir Ethanolate And Cobicistat",
"DosageFormName": "TABLET, FOR SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "20260227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA220092",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "DARUNAVIR ETHANOLATE; COBICISTAT",
"StrengthNumber": "600; 90",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260227",
"SamplePackage": "N",
"IndicationAndUsage": "PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].",
"Description": "PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide."
},
{
"NDCCode": "59676-578-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (59676-578-30) ",
"NDC11Code": "59676-0578-30",
"ProductNDC": "59676-578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prezcobix",
"NonProprietaryName": "Darunavir Ethanolate And Cobicistat",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250321",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205395",
"LabelerName": "Janssen Products, LP",
"SubstanceName": "DARUNAVIR ETHANOLATE; COBICISTAT",
"StrengthNumber": "675; 150",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250321",
"SamplePackage": "N",
"IndicationAndUsage": "PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].",
"Description": "PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide."
},
{
"NDCCode": "0338-1099-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1099-04) ",
"NDC11Code": "00338-1099-04",
"ProductNDC": "0338-1099",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 15",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970929",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-1101-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1101-04) ",
"NDC11Code": "00338-1101-04",
"ProductNDC": "0338-1101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 20",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970929",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-1123-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1123-04) ",
"NDC11Code": "00338-1123-04",
"ProductNDC": "0338-1123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970326",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 15",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970326",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-1125-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1125-04) ",
"NDC11Code": "00338-1125-04",
"ProductNDC": "0338-1125",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970326",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 20",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19970326",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-1127-04",
"PackageDescription": "2000 mL in 1 BAG (0338-1127-04) ",
"NDC11Code": "00338-1127-04",
"ProductNDC": "0338-1127",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970326",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 25",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]",
"Status": "Deprecated",
"LastUpdate": "2018-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19970326",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>59676-280-90</NDCCode>
<PackageDescription>9 BLISTER PACK in 1 CARTON (59676-280-90) / 10 TABLET, FOR SUSPENSION in 1 BLISTER PACK (59676-280-01) </PackageDescription>
<NDC11Code>59676-0280-90</NDC11Code>
<ProductNDC>59676-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edurant Ped</ProprietaryName>
<NonProprietaryName>Rilpivirine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219016</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>RILPIVIRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Human Immunodeficiency Virus 1 Non-Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Non-Nucleoside Analog [EXT], Non-Nucleoside Reverse Transcriptase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EDURANT and EDURANT PED are a human immunodeficiency virus type 1 (HIV-1) specific, non-nucleoside reverse transcriptase inhibitor (NNRTI) indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in treatment-naïve patients 2 years of age and older and weighing at least 14 kg with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1). Limitations of Use: 1 More EDURANT treated subjects with HIV-1 RNA greater than 100,000 copies/mL at the start of therapy experienced virologic failure (HIV-1 RNA ≥50 copies/mL) compared to EDURANT treated subjects with HIV-1 RNA less than or equal to 100,000 copies/mL. ( 1.1, 14) .</IndicationAndUsage>
<Description>EDURANT ® (rilpivirine) is a non-nucleoside reverse transcriptase inhibitor (NNRTI) of human immunodeficiency virus type 1 (HIV-1). The chemical name for rilpivirine hydrochloride is 4-[[4-[[4-[(E)-2-cyanoethenyl]-2,6-dimethylphenyl]amino]-2-pyrimidinyl]amino]benzonitrile monohydrochloride. Its molecular formula is C 22H 18N 6∙ HCl and its molecular weight is 402.88. Rilpivirine hydrochloride has the following structural formula:. Rilpivirine hydrochloride is a white to almost white powder. Rilpivirine hydrochloride is practically insoluble in water over a wide pH range. EDURANT 25 mg tablets are available as a white to off-white, film-coated, round, biconvex, 6.4 mm tablet for oral administration. Each tablet contains 27.5 mg of rilpivirine hydrochloride, which is equivalent to 25 mg of rilpivirine. Each EDURANT 25 mg tablet also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, magnesium stearate, polysorbate 20, povidone K30 and silicified microcrystalline cellulose. The tablet coating contains hypromellose 2910 6 mPa.s, lactose monohydrate, PEG 3000, titanium dioxide and triacetin. EDURANT PED 2.5 mg tablets for oral suspension are available as white to almost white, round 6.5 mm tablet, debossed with "TMC" on one side and "PED" on the other side. Each tablet for oral suspension contains 2.75 mg of rilpivirine hydrochloride equivalent to 2.5 mg rilpivirine. Each tablet for oral suspension also contains the inactive ingredients croscarmellose sodium, lactose monohydrate, mannitol, microcrystalline cellulose, polysorbate 20, povidone K30, sodium lauryl sulfate and sodium stearyl fumarate.</Description>
</NDC>
<NDC>
<NDCCode>10370-280-09</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (10370-280-09) </PackageDescription>
<NDC11Code>10370-0280-09</NDC11Code>
<ProductNDC>10370-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dutasteride And Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Dutasteride And Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202509</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>DUTASTERIDE; TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5; .4</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC], 5-alpha Reductase Inhibitors [MoA], Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dutasteride and tamsulosin hydrochloride capsules are a combination of dutasteride, a 5-alpha-reductase inhibitor, and tamsulosin, an alpha-adrenergic antagonist, indicated for the treatment of symptomatic benign prostatic hyperplasia (BPH) in men with an enlarged prostate. (1.1). Limitations of Use: Dutasteride-containing products, including dutasteride and tamsulosin hydrochloride capsules, are not approved for the prevention of prostate cancer. (1.2).</IndicationAndUsage>
<Description>Dutasteride and tamsulosin hydrochloride capsules contain dutasteride (a selective inhibitor of both the type 1 and type 2 isoforms of steroid 5 alpha-reductase, an intracellular enzyme that converts testosterone to DHT and tamsulosin (an antagonist of alpha1A-adrenoceptors in the prostate). Each dutasteride and tamsulosin hydrochloride capsule contains the following: 1 One dutasteride oblong, opaque, yellow gelatin capsule, containing 0.5 mg of dutasteride dissolved in a mixture of butylated hydroxytoluene and mono-and di-glycerides of caprylic/capric acid. The inactive ingredients in the soft-gelatin capsule shell are ferric oxide (yellow), gelatin (from certified BSE-free bovine sources), glycerin, titanium dioxide, lecithin, medium chain triglycerides, propylene glycol, iron oxide black, polyvinyl acetate phthalate, macrogol, and ammonium hydroxide., 2 Tamsulosin hydrochloride white to off-white pellets, containing 0.4 mg tamsulosin hydrochloride and the inactive ingredients: methacrylic acid copolymer, sugar sphere, ethylcellulose, polyethylene glycol, triethyl citrate and talc.</Description>
</NDC>
<NDC>
<NDCCode>21695-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (21695-280-90)</PackageDescription>
<NDC11Code>21695-0280-90</NDC11Code>
<ProductNDC>21695-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Propoxyphene Napsylate And Acetaminophen</ProprietaryName>
<NonProprietaryName>Propoxyphene Napsylate And Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074119</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>PROPOXYPHENE NAPSYLATE; ACETAMINOPHEN</SubstanceName>
<StrengthNumber>100; 650</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-01-10</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Propoxyphene napsylate and acetaminophen tablets are indicated for the relief of mild to moderate pain.</IndicationAndUsage>
<Description>Propoxyphene napsylate and acetaminophen tablets USP contain propoxyphene napsylate and acetaminophen. Propoxyphene napsylate is an odorless, white crystalline powder with a bitter taste. It is very slightly soluble in water, soluble in methanol, in ethanol, in chloroform, and in acetone. Chemically it is (αS,1R)-α-[2-(dimethylamino)-1-methylethyl]-α-phenylphenethyl propionate compound with 2-naphthalenesulfonic acid (1:1) monohydrate and can be represented by the following structural formula. C22H29NO2C10H8O3SH2O M.W. 565.74. Propoxyphene napsylate differs from propoxyphene hydrochloride in that it allows more stable liquid dosage forms and tablet formulations. Because of differences in molecular weight, a dose of 100 mg (176.8 μmol) of propoxyphene napsylate is required to supply an amount of propoxyphene equivalent to that present in 65 mg (172.9 μmol) of propoxyphene hydrochloride. Acetaminophen, 4'-hydroxyacetanilide, is a non-opiate, non-salicylate analgesic and antipyretic which occurs as a white, odorless, crystalline powder, possessing a slightly bitter taste. Chemically, it is acetamide, N-(4-hydroxyphenyl)- and can structurally be represented by the following. C8H9NO2 M.W. 151.16. Each pink or white tablet of propoxyphene napsylate and acetaminophen tablets contains 100 mg propoxyphene napsylate and 650 mg acetaminophen. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (PINK) contain the following inactive ingredients: colloidal silicon dioxide, D&C red No. 27 aluminum lake, D&C yellow No. 10 aluminum lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch, stearic acid, titanium dioxide, and crospovidone. Propoxyphene napsylate and acetaminophen tablets, USP 100 mg/650 mg (WHITE) contain the following inactive ingredients: castor oil, colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, pregelatinized starch, stearic acid, and crospovidone.</Description>
</NDC>
<NDC>
<NDCCode>33342-280-10</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (33342-280-10) </PackageDescription>
<NDC11Code>33342-0280-10</NDC11Code>
<ProductNDC>33342-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207292</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and valsartan tablets, USP are the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure: In patients not adequately controlled on monotherapy (1) As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1). Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.</IndicationAndUsage>
<Description>Amlodipine and valsartan tablets, USP are a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: Its molecular formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is: Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets, USP are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, (6.9 mg or 13.9 mg, equivalent to 5 mg or 10 mg of amlodipine respectively) with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients of all strengths of the tablets are microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Additionally the 5/320 mg and 10/320 mg strengths contain ferric oxide yellow. The film coating contains hypromellose, polyethylene glycol, talc, titanium dioxide, iron oxide yellow. Additionally the 5/320 mg and 10/160 mg contain iron oxide red. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>42291-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (42291-280-90) </PackageDescription>
<NDC11Code>42291-0280-90</NDC11Code>
<ProductNDC>42291-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Finasteride</ProprietaryName>
<NonProprietaryName>Finasteride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130226</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076511</ApplicationNumber>
<LabelerName>AvKARE, Inc.</LabelerName>
<SubstanceName>FINASTERIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>5-alpha Reductase Inhibitor [EPC],5-alpha Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-06-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>43063-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43063-280-90)</PackageDescription>
<NDC11Code>43063-0280-90</NDC11Code>
<ProductNDC>43063-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19870501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074769</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-04-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>46708-280-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (46708-280-90) </PackageDescription>
<NDC11Code>46708-0280-90</NDC11Code>
<ProductNDC>46708-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202949</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140609</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults , 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30 and 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ascorbic acid, FD&C Blue No. 2, gelatin, hypromellose, hypromellose phthalate, talc, titanium dioxide, triethyl citrate, sodium lauryl sulfate, sucrose and sugar spheres. The 20 and 60 mg capsules also contain iron oxide yellow. Ink contains following ingredients. 20 mg: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. 30 mg: FD&C Blue No. 2 Aluminum Lake, propylene glycol, shellac, strong ammonia solution, titanium dioxide and yellow iron oxide. 60 mg: potassium hydroxide, propylene glycol, shellac, strong ammonia solution and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>51655-280-26</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51655-280-26) </PackageDescription>
<NDC11Code>51655-0280-26</NDC11Code>
<ProductNDC>51655-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075185</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221206</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals ( see WARNINGS; Gastrointestinal Bleeding, Ulceration, and Perforation). Diclofenac is indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.</IndicationAndUsage>
<Description>Diclofenac sodium delayed-release tablets is a benzene-acetic acid derivative. Diclofenac sodium is a white or slightly yellowish crystalline powder and is sparingly soluble in water at 25°C. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula. The inactive ingredients in diclofenac sodium delayed-release tablets include: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, sodium starch glycolate, talc, titanium dioxide, triethyl citrate and ink fine black.</Description>
</NDC>
<NDC>
<NDCCode>59651-280-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (59651-280-90) </PackageDescription>
<NDC11Code>59651-0280-90</NDC11Code>
<ProductNDC>59651-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine</ProprietaryName>
<NonProprietaryName>Duloxetine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090778</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults and pediatric patients 13 years of age and older , 5 Chronic musculoskeletal pain in adults .</IndicationAndUsage>
<Description>Duloxetine delayed-release capsules are selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The molecular formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to brownish-white solid, which is slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30, or 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride USP, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include crospovidone, hydroxy propyl cellulose, hypromellose, hypromellose phthalate, sugar spheres, talc, titanium dioxide, and triethylcitrate. The empty hard gelatin capsule shells contain gelatin, titanium dioxide, and sodium lauryl sulphate. In addition, the 20 mg and 60 mg contain FD&C Blue No. 2 and iron oxide yellow and 30 mg contains FD&C Blue No. 2. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>59746-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (59746-280-90) </PackageDescription>
<NDC11Code>59746-0280-90</NDC11Code>
<ProductNDC>59746-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Escitalopram</ProprietaryName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202280</ApplicationNumber>
<LabelerName>Jubilant Cadista Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60760-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (60760-280-90)</PackageDescription>
<NDC11Code>60760-0280-90</NDC11Code>
<ProductNDC>60760-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101224</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079153</ApplicationNumber>
<LabelerName>St Marys Medical Park Pharmacy</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-20</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61786-280-19</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (61786-280-19)</PackageDescription>
<NDC11Code>61786-0280-19</NDC11Code>
<ProductNDC>61786-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150429</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200292</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-11-15</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62332-280-90</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62332-280-90) </PackageDescription>
<NDC11Code>62332-0280-90</NDC11Code>
<ProductNDC>62332-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Duloxetine Hydrochloride</ProprietaryName>
<NonProprietaryName>Duloxetine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260409</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202949</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DULOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260409</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Duloxetine delayed-release capsules are indicated for the treatment of: : 1 Major depressive disorder in adults , 2 Generalized anxiety disorder in adults and pediatric patients 7 years of age and older , 3 Diabetic peripheral neuropathic pain in adults , 4 Fibromyalgia in adults and pediatric patients 13 years of age and older, 5 Chronic musculoskeletal pain in adults.</IndicationAndUsage>
<Description>Duloxetine hydrochloride is a selective serotonin and norepinephrine reuptake inhibitor (SNRI) for oral administration. Its chemical designation is (+)-(S)-N-methyl-γ-(1-naphthyloxy)-2-thiophenepropylamine hydrochloride. The empirical formula is C18H19NOSHCl, which corresponds to a molecular weight of 333.88. The structural formula is. Duloxetine hydrochloride USP is a white to off-white powder, which is freely soluble in methanol and slightly soluble in water. Each capsule contains enteric-coated pellets of 20, 30 and 60 mg of duloxetine (equivalent to 22.4, 33.7, or 67.3 mg of duloxetine hydrochloride, respectively). These enteric-coated pellets are designed to prevent degradation of the drug in the acidic environment of the stomach. Inactive ingredients include ascorbic acid, FD&C Blue No. 2, gelatin, hypromellose, hypromellose phthalate, sodium lauryl sulfate, sucrose, sugar spheres, talc, titanium dioxide and triethyl citrate. The 20 and 60 mg capsules also contain iron oxide yellow. Ink contains following ingredients. 20 mg: black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution. 30 mg: FD&C Blue No. 2 Aluminum Lake, propylene glycol, shellac, strong ammonia solution, titanium dioxide and yellow iron oxide. 60 mg: potassium hydroxide, propylene glycol, shellac, strong ammonia solution and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62856-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (62856-280-90) </PackageDescription>
<NDC11Code>62856-0280-90</NDC11Code>
<ProductNDC>62856-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fycompa</ProprietaryName>
<NonProprietaryName>Perampanel</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121022</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202834</ApplicationNumber>
<LabelerName>Eisai Inc.</LabelerName>
<SubstanceName>PERAMPANEL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>AMPA Receptor Antagonists [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Noncompetitive AMPA Glutamate Receptor Antagonist [EPC], UGT1A9 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121022</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>FYCOMPA, a non-competitive AMPA glutamate receptor antagonist, is indicated for: 1 Treatment of partial-onset seizures with or without secondarily generalized seizures in patients with epilepsy 4 years of age and older (1.1), 2 Adjunctive therapy in the treatment of primary generalized tonic-clonic seizures in patients with epilepsy 12 years of age and older (1.2).</IndicationAndUsage>
<Description>FYCOMPA tablets and oral suspension contain perampanel, a non-competitive AMPA receptor antagonist, as a 4:3 hydrate. The chemical name of the active ingredient is 2-(1′,6′-dihydro-6′-oxo-1′-phenyl[2,3′-bipyridin]-5′-yl)-benzonitrile, hydrate (4:3). The molecular formula is C23H15N3O ¾H2O and the molecular weight is 362.90 (349.39 for anhydrous perampanel). It is a white to yellowish white powder. It is freely soluble in 1-methyl-2-pyrrolidinone, sparingly soluble in acetonitrile and acetone, slightly soluble in methanol, ethanol and ethyl acetate, very slightly soluble in 1-octanol and diethyl ether, and practically insoluble in heptane and water. The chemical structure is. Tablets. FYCOMPA tablets are round, bi-convex, film-coated tablets containing 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of perampanel. Tablets contain the following inactive ingredients: lactose monohydrate, low substituted hydroxypropyl cellulose, povidone, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, talc, and titanium dioxide. Tablets of different strengths may contain yellow ferric oxide (10 mg and 2 mg), red ferric oxide (2 mg, 4 mg, 6 mg, 8 mg), black ferric oxide (8 mg), and FD&C Blue No. 2 (indigo carmine) aluminum lake (10 mg and 12 mg). Oral Suspension. FYCOMPA oral suspension is a white to off-white opaque liquid providing perampanel in a concentration of 0.5 mg/mL. The oral suspension contains the following inactive ingredients: sorbitol, microcrystalline cellulose, carboxymethyl-cellulose sodium, poloxamer, simethicone, citric acid, sodium benzoate and purified water.</Description>
</NDC>
<NDC>
<NDCCode>63187-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE, PLASTIC (63187-280-90) </PackageDescription>
<NDC11Code>63187-0280-90</NDC11Code>
<ProductNDC>63187-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Baclofen</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077241</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-05-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Baclofen is useful for the alleviation of signs and symptoms of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. Patients should have reversible spasticity so that baclofen treatment will aid in restoring residual function. Baclofen may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Baclofen is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders. The efficacy of baclofen in stroke, cerebral palsy, and Parkinson's disease has not been established and, therefore, it is not recommended for these conditions.</IndicationAndUsage>
<Description>Baclofen USP is a muscle relaxant and antispastic. Its chemical name is 4-amino-3-(-4-chlorophenyl)-butanoic acid. The structural formula is. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol and insoluble in chloroform. Each tablet, for oral administration, contains 10 mg or 20 mg baclofen. In addition, each tablet contains the following inactive ingredients: microcrystalline cellulose, pregelatinized starch, colloidal silicon dioxide, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>65162-280-09</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (65162-280-09) </PackageDescription>
<NDC11Code>65162-0280-09</NDC11Code>
<ProductNDC>65162-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paliperidone</ProprietaryName>
<NonProprietaryName>Paliperidone</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190924</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204707</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>PALIPERIDONE</SubstanceName>
<StrengthNumber>1.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190924</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Paliperidone extended-release tablets contains paliperidone USP, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. Paliperidone, USP contains a racemic mixture of (+)- and (-)- paliperidone. The chemical name is (±)-3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-9-hydroxy-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C23H27FN4O3 and its molecular weight is 426.49. The structural formula is. Paliperidone, USP is sparingly soluble in 0.1N HCl and methylene chloride; practically insoluble in water, 0.1N NaOH, and hexane; and slightly soluble in N,N-dimethylformamide. Paliperidone extended-release tablets are intended for oral administration and are available in 1.5 mg (brown), 3 mg (white), 6 mg (light beige), and 9 mg (pink) strengths. Inactive ingredients are colloidal silicon dioxide, fumaric acid, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene oxides, povidone, talc and triethyl citrate. The 1.5 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. The 6 mg tablets also contain iron oxide red and iron oxide yellow. The 9 mg tablets also contain iron oxide black, iron oxide red and iron oxide yellow. Delivery System Components and Performance. Paliperidone extended-release tablets use a hydrophilic matrix core and pH dependent enteric coating to deliver paliperidone, USP at a controlled rate. The delivery system consists of an inner core composed of the drug, rate controlling polymers and other excipients. The core is coated with multiple layers comprising of delayed release polymer and a drug layering polymer system. Each tablet strength has a different colored coating. In an aqueous environment, such as the gastrointestinal tract, the water-dispersible overcoat erodes quickly. The combination of the coating layers ensures an initial drug release, while delaying exposure of the matrix core. Upon attaining the intended pH, the delayed release coating dissolves, the hydrophilic polymers of the core hydrate and swell forming a gel like barrier that regulates the rate at which the drug is released from the tablet, ensuring a steady and prolonged delivery.</Description>
</NDC>
<NDC>
<NDCCode>68382-280-16</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (68382-280-16) </PackageDescription>
<NDC11Code>68382-0280-16</NDC11Code>
<ProductNDC>68382-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203000</ApplicationNumber>
<LabelerName>Zydus Pharmaceuticals (USA) Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>160; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69616-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (69616-280-90) </PackageDescription>
<NDC11Code>69616-0280-90</NDC11Code>
<ProductNDC>69616-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fycompa</ProprietaryName>
<NonProprietaryName>Perampanel</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240102</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202834</ApplicationNumber>
<LabelerName>Catalyst Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>PERAMPANEL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>AMPA Receptor Antagonists [MoA], Cytochrome P450 2C8 Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Noncompetitive AMPA Glutamate Receptor Antagonist [EPC], UGT1A9 Inhibitors [MoA], UGT2B7 Inhibitors [MoA]</Pharm_Classes>
<DEASchedule>CIII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>FYCOMPA tablets and oral suspension contain perampanel, a non-competitive AMPA receptor antagonist, as a 4:3 hydrate. The chemical name of the active ingredient is 2-(1′,6′-dihydro-6′-oxo-1′-phenyl[2,3′-bipyridin]-5′-yl)-benzonitrile, hydrate (4:3). The molecular formula is C23H15N3O ¾H2O and the molecular weight is 362.90 (349.39 for anhydrous perampanel). It is a white to yellowish white powder. It is freely soluble in 1-methyl-2-pyrrolidinone, sparingly soluble in acetonitrile and acetone, slightly soluble in methanol, ethanol and ethyl acetate, very slightly soluble in 1-octanol and diethyl ether, and practically insoluble in heptane and water. The chemical structure is. Tablets. FYCOMPA tablets are round, bi-convex, film-coated tablets containing 2 mg, 4 mg, 6 mg, 8 mg, 10 mg, or 12 mg of perampanel. Tablets contain the following inactive ingredients: lactose monohydrate, low substituted hydroxypropyl cellulose, povidone, microcrystalline cellulose, magnesium stearate, hypromellose, polyethylene glycol, talc, and titanium dioxide. Tablets of different strengths may contain yellow ferric oxide (10 mg and 2 mg), red ferric oxide (2 mg, 4 mg, 6 mg, 8 mg), black ferric oxide (8 mg), and FD&C Blue No. 2 (indigo carmine) aluminum lake (10 mg and 12 mg). Oral Suspension. FYCOMPA oral suspension is a white to off-white opaque liquid providing perampanel in a concentration of 0.5 mg/mL. The oral suspension contains the following inactive ingredients: sorbitol, microcrystalline cellulose, carboxymethyl-cellulose sodium, poloxamer, simethicone, citric acid, sodium benzoate and purified water.</Description>
</NDC>
<NDC>
<NDCCode>71205-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (71205-280-90) </PackageDescription>
<NDC11Code>71205-0280-90</NDC11Code>
<ProductNDC>71205-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Buspirone Hydrochloride</ProprietaryName>
<NonProprietaryName>Buspirone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180703</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209696</ApplicationNumber>
<LabelerName>Proficient Rx LP</LabelerName>
<SubstanceName>BUSPIRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2020-04-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Buspirone hydrochloride tablets are indicated for the management of anxiety disorder or the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. The efficacy of buspirone hydrochloride tablets has been demonstrated in controlled clinical trials of outpatients whose diagnosis roughly corresponds to Generalized Anxiety Disorder (GAD). Many of the patients enrolled in these studies also had coexisting depressive symptoms and buspirone hydrochloride tablets relieved anxiety in the presence of these coexisting depressive symptoms. The patients evaluated in these studies had experienced symptoms for periods of 1 month to over 1 year prior to the study, with an average symptom duration of 6 months. Generalized Anxiety Disorder (300.02) is described in the American Psychiatric Association's Diagnostic and Statistical Manual, III1 as follows. Generalized, persistent anxiety (of at least 1 month continual duration), manifested by symptoms from three of the four following categories: 1 1.Motor tension: shakiness, jitteriness, jumpiness, trembling, tension, muscle aches, fatigability, inability to relax, eyelid twitch, furrowed brow, strained face, fidgeting, restlessness, easy startle., 2 2.Autonomic hyperactivity: sweating, heart pounding or racing, cold, clammy hands, dry mouth, dizziness, lightheadedness, paresthesias (tingling in hands or feet), upset stomach, hot or cold spells, frequent urination, diarrhea, discomfort in the pit of the stomach, lump in the throat, flushing, pallor, high resting pulse and respiration rate., 3 3.Apprehensive expectation: anxiety, worry, fear, rumination, and anticipation of misfortune to self or others., 4 4.Vigilance and scanning: hyperattentiveness resulting in distractibility, difficulty in concentrating, insomnia, feeling "on edge," irritability, impatience.</IndicationAndUsage>
<Description>Buspirone hydrochloride tablets, USP are an antianxiety agent that is not chemically or pharmacologically related to the benzodiazepines, barbiturates, or other sedative/anxiolytic drugs. Buspirone hydrochloride is a white crystalline, water soluble compound with a molecular weight of 422.0. Chemically, buspirone hydrochloride is 8-[4-[4-(2-pyrimidinyl)-1piperazinyl]butyl]-8-azaspiro[4.5]decane-7,9-dione monohydrochloride. The empirical formula C21H31N5O2 HCl is represented by the following structural formula. Buspirone Hydrochloride Tablets are for oral administration, contains 5 mg, 7.5 mg, 10 mg, 15 mg or 30 mg of buspirone hydrochloride USP (equivalent to 4.6 mg, 6.9 mg, 9.1 mg, 13.7 mg and 27.4 mg of buspirone free base, respectively). The 5 mg and 10 mg tablets are functionally-scored so they can be bisected. Thus, the 5 mg tablet can also provide a 2.5 mg dose, and the 10 mg tablet can provide a 5 mg dose. The 15 mg tablets are functionally-scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 15 mg (entire tablet), 10 mg (two-thirds of a tablet), 7.5 mg (one-half of a tablet), or 5 mg (one-third of a tablet). The 30 mg tablets are functionally-scored such that they may be bisected or trisected. Thus, a single tablet can provide the following doses: 30 mg (entire tablet), 20 mg (two-thirds of a tablet), 15 mg (one-half of a tablet), or 10 mg (one- third of a tablet). Buspirone hydrochloride tablets, USP contain the following inactive ingredients: anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>71610-280-60</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (71610-280-60) </PackageDescription>
<NDC11Code>71610-0280-60</NDC11Code>
<ProductNDC>71610-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091672</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole delayed-release capsules are a proton pump inhibitor (PPI) indicated for the:. Treatment of active duodenal ulcer in adults ( 1.1) . Eradication of Helicobacter pylorito reduce the risk of duodenal ulcer recurrence in adults ( 1.2) . Treatment of active benign gastric ulcer in adults ( 1.3) . Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 2 years of age and older ( 1.4) . Maintenance of healing of EE due to acid-mediated GERD in patients 2 years of age and older ( 1.6) . Pathologic hypersecretory conditions in adults ( 1.7) .</IndicationAndUsage>
<Description>The active ingredient in omeprazole delayed-release capsules USP is a substituted benzimidazole, 5-methoxy-2[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C 17H 19N 3O 3S, with a molecular weight of 345.42. The structural formula is:. Omeprazole USP is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole USP is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg or 40 mg of omeprazole USP in the form of enteric-coated granules with the following inactive ingredients: anhydrous lactose, cetyl alcohol, di-sodium hydrogen phosphate dihydrate, hypromellose, hypromellose phthalate, mannitol, simethicone emulsion 30%, sodium lauryl sulfate and sugar sphere. The capsule shell for omeprazole delayed-release capsules USP, 10 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 20 mg contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. The capsule shell for omeprazole delayed-release capsules USP, 40 mg contains FD&C Red No. 40, FD&C Yellow No. 6, D&C Yellow No.10, gelatin, FD&C Blue No.1, sodium lauryl sulfate and titanium dioxide. The imprinting ink has the following components: shellac, dehydrated alcohol, isopropyl alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide and potassium hydroxide.</Description>
</NDC>
<NDC>
<NDCCode>72189-280-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (72189-280-90) </PackageDescription>
<NDC11Code>72189-0280-90</NDC11Code>
<ProductNDC>72189-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cyclobenzaprine Hydrochloride</ProprietaryName>
<NonProprietaryName>Cyclobenzaprine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211007</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213324</ApplicationNumber>
<LabelerName>DirectRx</LabelerName>
<SubstanceName>CYCLOBENZAPRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211007</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cyclobenzaprine hydrochloride tablets, USP are indicated as an adjunct to rest and physical therapy for relief of muscle spasm associated with acute, painful musculoskeletal conditions. Improvement is manifested by relief of muscle spasm and its associated signs and symptoms, namely, pain, tenderness, limitation of motion, and restriction in activities of daily living. Cyclobenzaprine hydrochloride tablets, USP should be used only for short periods (up to two or three weeks) because adequate evidence of effectiveness for more prolonged use is not available and because muscle spasm associated with acute, painful musculoskeletal conditions is generally of short duration and specific therapy for longer periods is seldom warranted. Cyclobenzaprine hydrochloride tablets, USP has not been found effective in the treatment of spasticity associated with cerebral or spinal cord disease, or in children with cerebral palsy.</IndicationAndUsage>
<Description>Cyclobenzaprine hydrochloride, USP is a white to off-white, odorless, crystalline powder with the molecular formula C20H21NHCl and a molecular weight of 311.85. It has a melting point between 215°C to 219°C and a pKa of 8.47. It is freely soluble in water, in alcohol, and in methanol, sparingly soluble in isopropanol, slightly soluble in chloroform and in methylene chloride, insoluble in n-Hexane. Cyclobenzaprine HCl, USP is designated chemically as 3-(5H-Dibenzo[a,d] cyclohepten-5 ylidene)-N,N-dimethyl-1-propanamine hydrochloride, and has the following structural formula. Image Cyclobenzaprine hydrochloride USP, 5 mg is supplied as a 5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 7.5 mg is supplied as a 7.5 mg tablet for oral administration. Cyclobenzaprine hydrochloride USP, 10 mg is supplied as a 10 mg tablet for oral administration. Cyclobenzaprine hydrochloride tablets, USP 5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide and triacetin. Cyclobenzaprine hydrochloride tablets, USP 7.5 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide. Cyclobenzaprine hydrochloride tablets, USP 10 mg contain the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, hypromellose, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, talc, titanium dioxide, triacetin and yellow iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>76420-280-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (76420-280-90) </PackageDescription>
<NDC11Code>76420-0280-90</NDC11Code>
<ProductNDC>76420-280</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140612</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076343</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Cytochrome P450 3A4 Inducers [MoA], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-09-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Topiramate tablets are indicated for: : 1 Epilepsy: initial monotherapy for the treatment of partial-onset or primary generalized tonic-clonic seizures in patients 2 years of age and older ( 1.1); adjunctive therapy for the treatment of partial-onset seizures, primary generalized tonic-clonic seizures, or seizures associated with Lennox-Gastaut syndrome in patients 2 years of age and older ( 1.2) , 2 Preventive treatment of migraine in patients 12 years of age and older ( 1.3) .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets USP are available as 25 mg, 50 mg, and 100 mg circular tablets and 200 mg capsule shaped tablets for oral administration. Topiramate is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C 12H 21NO 8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di- O-isopropylidene-ß-D-fructopyranose sulfamate and has the following structural formula:. Each tablet, for oral administration, contains 25 mg, 50 mg, 100 mg and 200 mg topiramate and has the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate and titanium dioxide. In addition, the 25 mg also contains FD&C Blue#2; the 50 mg and 100 mg also contain red iron oxide and yellow iron oxide; and the 200 mg also contains red iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>59676-575-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (59676-575-30) </PackageDescription>
<NDC11Code>59676-0575-30</NDC11Code>
<ProductNDC>59676-575</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prezcobix</ProprietaryName>
<NonProprietaryName>Darunavir Ethanolate And Cobicistat</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150131</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205395</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>DARUNAVIR ETHANOLATE; COBICISTAT</SubstanceName>
<StrengthNumber>800; 150</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].</IndicationAndUsage>
<Description>PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>59676-577-30</NDCCode>
<PackageDescription>30 TABLET, FOR SUSPENSION in 1 BOTTLE (59676-577-30) </PackageDescription>
<NDC11Code>59676-0577-30</NDC11Code>
<ProductNDC>59676-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prezcobix Ped</ProprietaryName>
<NonProprietaryName>Darunavir Ethanolate And Cobicistat</NonProprietaryName>
<DosageFormName>TABLET, FOR SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA220092</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>DARUNAVIR ETHANOLATE; COBICISTAT</SubstanceName>
<StrengthNumber>600; 90</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].</IndicationAndUsage>
<Description>PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>59676-578-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (59676-578-30) </PackageDescription>
<NDC11Code>59676-0578-30</NDC11Code>
<ProductNDC>59676-578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prezcobix</ProprietaryName>
<NonProprietaryName>Darunavir Ethanolate And Cobicistat</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250321</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205395</ApplicationNumber>
<LabelerName>Janssen Products, LP</LabelerName>
<SubstanceName>DARUNAVIR ETHANOLATE; COBICISTAT</SubstanceName>
<StrengthNumber>675; 150</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Protease Inhibitors [MoA], Multidrug and Toxin Extrusion Transporter 1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B3 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250321</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PREZCOBIX and PREZCOBIX PED are indicated in combination with other antiretroviral agents for the treatment of human immunodeficiency virus (HIV-1) in treatment-naïve and treatment-experienced adults and pediatric patients 3 years of age and older weighing at least 15 kg with no darunavir resistance-associated substitutions (V11I, V32I, L33F, I47V, I50V, I54L, I54M, T74P, L76V, I84V, L89V) [see Use in Specific Populations (8.4) and Clinical Studies (14)].</IndicationAndUsage>
<Description>PREZCOBIX and PREZCOBIX PED are fixed-dose combination products containing darunavir and cobicistat. Darunavir is an inhibitor of the human immunodeficiency virus (HIV-1) protease. Cobicistat is a mechanism-based inhibitor of cytochrome P450 (CYP) enzymes of the CYP3A family. Darunavir: Darunavir, in the form of darunavir ethanolate, has the following chemical name: [(1S,2R)-3-[[(4-aminophenyl)sulfonyl](2-methylpropyl)amino]-2-hydroxy-1-(phenylmethyl)propyl]-carbamic acid (3R,3aS,6aR)-hexahydrofuro[2,3-b]furan-3-yl ester monoethanolate. Its molecular formula is C27H37N3O7S ∙ C2H5OH and its molecular weight is 593.73. Darunavir ethanolate has the following structural formula. Cobicistat: Cobicistat is adsorbed onto silicon dioxide. The chemical name for cobicistat is 1,3-thiazol-5-ylmethyl[(2R,5R)-5-{[(2S)2-[(methyl{[2-(propan-2-yl)-1,3-thiazol-4-yl]methyl}carbamoyl)amino]-4-(morpholin-4yl)butanoyl]amino}-1,6-diphenylhexan-2-yl]carbamate. It has a molecular formula of C40H53N7O5S2 and a molecular weight of 776.0. It has the following structural formula. PREZCOBIX® 800 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 800 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, crospovidone, hypromellose, magnesium stearate, and silicified microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide red, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® 675 mg darunavir/150 mg cobicistat tablets are for oral administration. Each tablet contains darunavir ethanolate equivalent to 675 mg of darunavir and 150 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, and microcrystalline cellulose. The tablets are film-coated with a coating material containing iron oxide black, iron oxide yellow, polyethylene glycol, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide. PREZCOBIX® PED 600 mg darunavir/90 mg cobicistat tablets for oral suspension are for oral administration. Each tablet for oral suspension contains darunavir ethanolate equivalent to 600 mg of darunavir and 90 mg of cobicistat. The tablets include the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, silicified microcrystalline cellulose, strawberry flavor, and sucralose. The tablets are film-coated with a coating material containing glycerol monocaprylocaprate type 1, iron oxide red, iron oxide black, macrogol polyvinyl alcohol graft copolymer, polyvinyl alcohol (partially hydrolyzed), talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0338-1099-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1099-04) </PackageDescription>
<NDC11Code>00338-1099-04</NDC11Code>
<ProductNDC>0338-1099</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 15</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-1101-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1101-04) </PackageDescription>
<NDC11Code>00338-1101-04</NDC11Code>
<ProductNDC>0338-1101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 20</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970929</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-1123-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1123-04) </PackageDescription>
<NDC11Code>00338-1123-04</NDC11Code>
<ProductNDC>0338-1123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970326</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 15</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-1125-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1125-04) </PackageDescription>
<NDC11Code>00338-1125-04</NDC11Code>
<ProductNDC>0338-1125</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970326</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 20</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-1127-04</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0338-1127-04) </PackageDescription>
<NDC11Code>00338-1127-04</NDC11Code>
<ProductNDC>0338-1127</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Sodium Acetate, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970326</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; SODIUM ACETATE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>365; 280; 290; 200; 300; 290; 240; 210; 90; 1035; 515; 575; 340; 250; 20; 340; 261; 51; 59; 33; 25</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS],Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Laxative [EPC],Increased Large Intestinal Motility [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE],Osmotic Activity [MoA],Blood Coagulation Factor [EPC],Increased Coagulation Factor Activity [PE],Calcium [CS],Cations, Divalent [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19970326</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>