{
"NDC": [
{
"NDCCode": "59898-180-44",
"PackageDescription": "1 KIT in 1 KIT (59898-180-44) * 25 PACKET in 1 CARTON (59898-200-15) > 3.5 mL in 1 PACKET (59898-200-35) ",
"NDC11Code": "59898-0180-44",
"ProductNDC": "59898-180",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Iwk-5",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "KIT",
"StartMarketingDate": "20140612",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "Water-Jel Technologies",
"Status": "Active",
"LastUpdate": "2017-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140612",
"SamplePackage": "N",
"IndicationAndUsage": "for the temporary relief of pain associated with minor burns."
},
{
"NDCCode": "33342-180-44",
"PackageDescription": "1000 TABLET in 1 BOTTLE (33342-180-44) ",
"NDC11Code": "33342-0180-44",
"ProductNDC": "33342-180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olmesartan Medoxomil",
"NonProprietaryName": "Olmesartan Medoxomil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20170425",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204814",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "OLMESARTAN MEDOXOMIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170425",
"SamplePackage": "N",
"IndicationAndUsage": "Olmesartan medoxomil tablets are indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC).Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.",
"Description": "Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil, USP is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole=-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil, USP is a white to light yellowish-white powder or crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, colloidal silicon dioxide, magnesium stearate, hypromellose, talc, titanium dioxide and iron oxide yellow (5 mg only)."
},
{
"NDCCode": "75749-052-44",
"PackageDescription": "180 mL in 1 TUBE (75749-052-44) ",
"NDC11Code": "75749-0052-44",
"ProductNDC": "75749-052",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201102",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "NINGBO PRETTY TOURISM MANUFACTURE CO.,LTD.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20201102",
"SamplePackage": "N",
"IndicationAndUsage": "Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available."
},
{
"NDCCode": "0498-4383-01",
"PackageDescription": "1 KIT in 1 KIT (0498-4383-01) * .9 g in 1 PACKET * 500 mL in 1 CONTAINER * .4 mL in 1 POUCH (0498-0143-04) * 118 mL in 1 BOTTLE, PLASTIC (59898-420-12) * .9 g in 1 PACKET * 1.4 mL in 1 PACKET (0498-0501-00) * .5 g in 1 PACKET (0498-0750-36) * 118 mL in 1 BOTTLE (0498-0100-02) ",
"NDC11Code": "00498-4383-01",
"ProductNDC": "0498-4383",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "4383 First Aid Kit",
"NonProprietaryName": "4383 First Aid",
"DosageFormName": "KIT",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Honeywell Safety Products USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180913",
"SamplePackage": "N",
"Description": "Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is: Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free. Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free."
},
{
"NDCCode": "0498-4384-01",
"PackageDescription": "1 KIT in 1 KIT (0498-4384-01) * 1.4 mL in 1 PACKET (0498-0501-00) * 500 mL in 1 CONTAINER * .4 mL in 1 POUCH (0498-0143-04) * 118 mL in 1 BOTTLE, PLASTIC (59898-420-12) * .9 g in 1 PACKET * .5 g in 1 PACKET (0498-0750-36) * 118 mL in 1 BOTTLE (0498-0100-02) * .9 g in 1 PACKET (0498-0800-34) ",
"NDC11Code": "00498-4384-01",
"ProductNDC": "0498-4384",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "4384 First Aid Kit",
"NonProprietaryName": "4384 First Aid",
"DosageFormName": "KIT",
"StartMarketingDate": "20180913",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Honeywell Safety Products USA, Inc.",
"Status": "Deprecated",
"LastUpdate": "2024-06-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180913",
"SamplePackage": "N",
"Description": "Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is: Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free. Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free."
},
{
"NDCCode": "0023-5853-18",
"PackageDescription": "180 CAPSULE, DELAYED RELEASE in 1 BOTTLE (0023-5853-18) ",
"NDC11Code": "00023-5853-18",
"ProductNDC": "0023-5853",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Delzicol",
"NonProprietaryName": "Mesalamine",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160516",
"EndMarketingDate": "20250531",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA204412",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MESALAMINE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminosalicylate [EPC], Aminosalicylic Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2025-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160516",
"EndMarketingDatePackage": "20250531",
"SamplePackage": "N",
"IndicationAndUsage": "DELZICOL is an aminosalicylate indicated for: 1 Treatment of mildly to moderately active ulcerative colitis in patients 5 years of age and older. (1.1), 2 Maintenance of remission of ulcerative colitis in adults. (1.2).",
"Description": "Each DELZICOL (mesalamine) delayed-release capsule for oral administration contains four 100 mg tablets of mesalamine, an aminosalicylate. DELZICOL (mesalamine) delayed-release capsules contain acrylic based resin, methacrylic acid and methyl methacrylate copolymer (Eudragit S), which dissolves at pH 7 or greater and releases mesalamine in the terminal ileum and beyond for topical anti-inflammatory action in the colon. Mesalamine (also referred to as 5-aminosalicylic acid or 5-ASA) has the chemical name 5-amino-2-hydroxybenzoic acid. Its structural formula is. Inactive Ingredients: Each capsule contains colloidal silicon dioxide, dibutyl sebacate, ferric oxide red (3.44 mg), ferric oxide yellow (0.62 mg), lactose monohydrate, magnesium stearate, methacrylic acid and methyl methancrylate copolymer (Eudragit S), polyethylene glycol, povidone, sodium starch glycolate, talc and hydroxypropyl methylcellulose (HPMC)."
},
{
"NDCCode": "0074-0576-34",
"PackageDescription": "1 BOTTLE in 1 CARTON (0074-0576-34) / 180 TABLET, FILM COATED in 1 BOTTLE",
"NDC11Code": "00074-0576-34",
"ProductNDC": "0074-0576",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Venclexta",
"NonProprietaryName": "Venetoclax",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160411",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208573",
"LabelerName": "AbbVie Inc.",
"SubstanceName": "VENETOCLAX",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "BCL-2 Inhibitor [EPC], Increased Cellular Death [PE], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20181121",
"SamplePackage": "N",
"IndicationAndUsage": "VENCLEXTA is a BCL-2 inhibitor indicated: : 1 For the treatment of adult patients with chronic lymphocytic leukemia (CLL) or small lymphocytic lymphoma (SLL). (1.1) , 2 In combination with azacitidine, or decitabine, or low-dose cytarabine for the treatment of newly diagnosed acute myeloid leukemia (AML) in adults 75 years or older, or who have comorbidities that preclude use of intensive induction chemotherapy. (1.2) .",
"Description": "Venetoclax is a BCL-2 inhibitor. It is a light yellow to dark yellow solid with the empirical formula C45H50ClN7O7S and a molecular weight of 868.44. Venetoclax is described chemically as 4-(4-{[2-(4-chlorophenyl)-4,4-dimethylcyclohex-1-en-1-yl]methyl}piperazin-1-yl)-N-({3-nitro-4-[(tetrahydro-2H-pyran-4-ylmethyl)amino]phenyl}sulfonyl)-2-(1H-pyrrolo[2,3-b]pyridin-5-yloxy)benzamide) and has the following chemical structure:. Venetoclax has very low aqueous solubility. VENCLEXTA tablets for oral use are supplied as pale yellow or beige tablets that contain 10, 50, or 100 mg venetoclax as the active ingredient. Each tablet also contains the following inactive ingredients: copovidone, colloidal silicon dioxide, polysorbate 80, sodium stearyl fumarate, and calcium phosphate dibasic. In addition, the 10 mg and 100 mg coated tablets include the following: iron oxide yellow, polyvinyl alcohol, polyethylene glycol, talc, and titanium dioxide. The 50 mg coated tablets also include the following: iron oxide yellow, iron oxide red, iron oxide black, polyvinyl alcohol, talc, polyethylene glycol and titanium dioxide. Each tablet is debossed with “V” on one side and “10”, “50” or “100” corresponding to the tablet strength on the other side."
},
{
"NDCCode": "0115-9930-78",
"PackageDescription": "1 POUCH in 1 CARTON (0115-9930-78) / 25 AMPULE in 1 POUCH (0115-9930-76) / 3 mL in 1 AMPULE",
"NDC11Code": "00115-9930-78",
"ProductNDC": "0115-9930",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".31",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170217",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0115-9931-78",
"PackageDescription": "1 POUCH in 1 CARTON (0115-9931-78) / 25 AMPULE in 1 POUCH (0115-9931-76) / 3 mL in 1 AMPULE",
"NDC11Code": "00115-9931-78",
"ProductNDC": "0115-9931",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170217",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0115-9932-78",
"PackageDescription": "1 POUCH in 1 CARTON (0115-9932-78) / 25 AMPULE in 1 POUCH (0115-9932-76) / 3 mL in 1 AMPULE",
"NDC11Code": "00115-9932-78",
"ProductNDC": "0115-9932",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20160322",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Amneal Pharmaceuticals of New York LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-02-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170217",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0378-6993-93",
"PackageDescription": "30 POUCH in 1 CARTON (0378-6993-93) > 1 VIAL in 1 POUCH (0378-6993-31) > .5 mL in 1 VIAL",
"NDC11Code": "00378-6993-93",
"ProductNDC": "0378-6993",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20090828",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078309",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2019-11-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090828",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol inhalation solution (concentrate) is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol inhalation solution, USP (concentrate) is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol hydrochloride is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol hydrochloride is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol hydrochloride is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol hydrochloride is the USAN modified name for (R)-albuterol hydrochloride in the United States. Levalbuterol inhalation solution (concentrate) is supplied in 0.5 mL individually-wrapped unit-dose vials that must be diluted with normal saline before administration by nebulization. Each 0.5 mL unit-dose vial contains 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol hydrochloride), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a chelating agent and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0378-9690-52",
"PackageDescription": "1 POUCH in 1 CARTON (0378-9690-52) > 25 AMPULE in 1 POUCH (0378-9690-62) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9690-52",
"ProductNDC": "0378-9690",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".31",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0378-9691-52",
"PackageDescription": "1 POUCH in 1 CARTON (0378-9691-52) > 25 AMPULE in 1 POUCH (0378-9691-62) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9691-52",
"ProductNDC": "0378-9691",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0378-9692-52",
"PackageDescription": "1 POUCH in 1 CARTON (0378-9692-52) > 25 AMPULE in 1 POUCH (0378-9692-62) > 3 mL in 1 AMPULE",
"NDC11Code": "00378-9692-52",
"ProductNDC": "0378-9692",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20180910",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2020-04-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180910",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "0409-4179-05",
"PackageDescription": "6 BAG in 1 CASE (0409-4179-05) > 1000 mL in 1 BAG",
"NDC11Code": "00409-4179-05",
"ProductNDC": "0409-4179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn-pf",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19861017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019492",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE",
"StrengthNumber": "760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC],Amino Acids [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-05-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "19861017",
"SamplePackage": "N"
},
{
"NDCCode": "0440-7200-92",
"PackageDescription": "180 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0440-7200-92)",
"NDC11Code": "00440-7200-92",
"ProductNDC": "0440-7200",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20080312",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077455",
"LabelerName": "Liberty Pharmaceuticals, Inc.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets, USP (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets, USP (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets, USP (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (SR) are supplied for oral administration as 100-mg (yellow), 150-mg (pale yellow), and 200-mg (pale yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, titanium dioxide, triacetin. In addition, the 100 mg tablets contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake, the 150 mg and 200 mg tablets contain iron oxide yellow. USP Dissolution Test 2 is used."
},
{
"NDCCode": "0781-2695-44",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (0781-2695-44) > 14 CAPSULE in 1 BOTTLE, GLASS",
"NDC11Code": "00781-2695-44",
"ProductNDC": "0781-2695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Temozolomide",
"NonProprietaryName": "Temozolomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20130812",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA021029",
"LabelerName": "Sandoz Inc.",
"SubstanceName": "TEMOZOLOMIDE",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkylating Activity [MoA], Alkylating Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2022-11-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20130812",
"SamplePackage": "N"
},
{
"NDCCode": "0990-4179-05",
"PackageDescription": "6 BAG in 1 CASE (0990-4179-05) / 1000 mL in 1 BAG",
"NDC11Code": "00990-4179-05",
"ProductNDC": "0990-4179",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aminosyn-pf",
"NonProprietaryName": "Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20191101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019492",
"LabelerName": "ICU Medical Inc.",
"SubstanceName": "ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE",
"StrengthNumber": "760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191101",
"SamplePackage": "N",
"IndicationAndUsage": "Aminosyn-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 10% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.",
"Description": "Aminosyn®-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn-PF 10% is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulation is described below. The formulas for the individual amino acids present in Aminosyn-PF 10% are as follows:. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture."
},
{
"NDCCode": "16590-700-82",
"PackageDescription": "180 TABLET in 1 BOTTLE (16590-700-82)",
"NDC11Code": "16590-0700-82",
"ProductNDC": "16590-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071218",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077397",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Major Depressive Disorder– Sertraline hydrochloride is indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-IIIR/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).",
"Description": "Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, microcrystalline cellulose, magnesium stearate, opadry green (titanium dioxide, hypromellose 3cP, hypromellose 6cP, Macrogol/Peg 400, Polysorbate 80, D&C Yellow # 10 Aluminum Lake, and FD&C Blue # 2/Indigo Carmine Aluminum Lake for 25mg tablet), opadry light blue (hypromellose 3cP, hypromellose 6cP, titanium dioxide, Macrogol/Peg 400, FD&C Blue # 2/Indigo Carmine Aluminum Lake and Polysorbate 80 for 50 mg tablet), opadry yellow (hypromellose 3cP, hypromellose 6cP, titanium dioxide, Macrogol/Peg 400, Polysorbate 80, Iron Oxide Yellow, Iron oxide Red for 100mg tablet) and sodium starch glycolate."
},
{
"NDCCode": "17478-171-30",
"PackageDescription": "30 POUCH in 1 CARTON (17478-171-30) > 1 VIAL, SINGLE-DOSE in 1 POUCH (17478-171-01) > .5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "17478-0171-30",
"ProductNDC": "17478-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xopenex",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION, CONCENTRATE",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020837",
"LabelerName": "Akorn",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150226",
"SamplePackage": "N",
"IndicationAndUsage": "XOPENEX (levalbuterol HCl) Inhalation Solution Concentrate is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "XOPENEX Inhalation Solution Concentrate is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution Concentrate is supplied in 0.5 mL unit-dose vials that must be diluted with normal saline before administration by nebulization. Each 0.5 mL unit-dose vial contains 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and hydrochloric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "17478-172-24",
"PackageDescription": "2 POUCH in 1 CARTON (17478-172-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-172-12) > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "17478-0172-24",
"ProductNDC": "17478-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xopenex",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020837",
"LabelerName": "Akorn",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".31",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150227",
"SamplePackage": "N",
"IndicationAndUsage": "XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "17478-173-24",
"PackageDescription": "2 POUCH in 1 CARTON (17478-173-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-173-12) > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "17478-0173-24",
"ProductNDC": "17478-173",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xopenex",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020837",
"LabelerName": "Akorn",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150227",
"SamplePackage": "N",
"IndicationAndUsage": "XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "17478-174-24",
"PackageDescription": "2 POUCH in 1 CARTON (17478-174-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-174-12) > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "17478-0174-24",
"ProductNDC": "17478-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xopenex",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20150227",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020837",
"LabelerName": "Akorn",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150227",
"SamplePackage": "N",
"IndicationAndUsage": "XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "21695-153-24",
"PackageDescription": "2 POUCH in 1 CARTON (21695-153-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "21695-0153-24",
"ProductNDC": "21695-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xopenex",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19990401",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020837",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Xopenex (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Xopenex (levalbuterol HCl) Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist (see CLINICAL PHARMACOLOGY). The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Xopenex (levalbuterol HCl) Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "24979-160-44",
"PackageDescription": "120 TABLET, DELAYED RELEASE in 1 BOTTLE (24979-160-44) ",
"NDC11Code": "24979-0160-44",
"ProductNDC": "24979-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolic Acid",
"NonProprietaryName": "Mycophenolic Acid",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20211108",
"EndMarketingDate": "20260930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214289",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "MYCOPHENOLATE SODIUM",
"StrengthNumber": "180",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211108",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolic acid delayed-release tablets are an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. (1.1). Use in combination with cyclosporine and corticosteroids. (1.1).",
"Description": "Mmycophenolic acid delayed-release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5-yl)-4-methylhex-4-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, USP as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1N hydrochloric acid. Mycophenolic acid is available for oral use as delayed-release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include crospovidone, hypromellose, lactose anhydrous, magnesium stearate, povidone, and starch. The enteric coating of the tablet consists of hypromellose phthalate, titanium dioxide, triethyl citrate, ferrosoferric oxide (180 mg), lactose monohydrate (180 mg), propylene glycol (180 mg) and triacetin (180 mg) or polyethylene glycol (360 mg), talc (360 mg), and FD&C yellow # 6 aluminum lake (360 mg)."
},
{
"NDCCode": "24979-161-44",
"PackageDescription": "120 TABLET, DELAYED RELEASE in 1 BOTTLE (24979-161-44) ",
"NDC11Code": "24979-0161-44",
"ProductNDC": "24979-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mycophenolic Acid",
"NonProprietaryName": "Mycophenolic Acid",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20211108",
"EndMarketingDate": "20260930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214289",
"LabelerName": "Upsher-Smith Laboratories, LLC",
"SubstanceName": "MYCOPHENOLATE SODIUM",
"StrengthNumber": "360",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimetabolite Immunosuppressant [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20211108",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "Mycophenolic acid delayed-release tablets are an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. (1.1). Use in combination with cyclosporine and corticosteroids. (1.1).",
"Description": "Mmycophenolic acid delayed-release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5-yl)-4-methylhex-4-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, USP as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1N hydrochloric acid. Mycophenolic acid is available for oral use as delayed-release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include crospovidone, hypromellose, lactose anhydrous, magnesium stearate, povidone, and starch. The enteric coating of the tablet consists of hypromellose phthalate, titanium dioxide, triethyl citrate, ferrosoferric oxide (180 mg), lactose monohydrate (180 mg), propylene glycol (180 mg) and triacetin (180 mg) or polyethylene glycol (360 mg), talc (360 mg), and FD&C yellow # 6 aluminum lake (360 mg)."
},
{
"NDCCode": "35573-443-25",
"PackageDescription": "25 POUCH in 1 CARTON (35573-443-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "35573-0443-25",
"ProductNDC": "35573-443",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Burel Pharmaceuticals, LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".31",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "35573-444-25",
"PackageDescription": "25 POUCH in 1 CARTON (35573-444-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "35573-0444-25",
"ProductNDC": "35573-444",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Burel Pharmaceuticals, LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": ".63",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "35573-445-25",
"PackageDescription": "25 POUCH in 1 CARTON (35573-445-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "35573-0445-25",
"ProductNDC": "35573-445",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levalbuterol",
"NonProprietaryName": "Levalbuterol Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20210401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203653",
"LabelerName": "Burel Pharmaceuticals, LLC",
"SubstanceName": "LEVALBUTEROL HYDROCHLORIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210401",
"SamplePackage": "N",
"IndicationAndUsage": "Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.",
"Description": "Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5)."
},
{
"NDCCode": "43353-546-80",
"PackageDescription": "180 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43353-546-80)",
"NDC11Code": "43353-0546-80",
"ProductNDC": "43353-546",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20090702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079095",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1- dimethylethyl)amino]-1 -propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100 mg, 150 mg, and 200 mg white to off-white, film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the following inactive ingredients: hydroxypropyl cellulose, microcrystalline cellulose, colloidal silicon dioxide, stearic acid, magnesium stearate, and diluted hydrochloric acid. The film coating contains lactose monohydrate, hydroxypropyl cellulose, titanium dioxide, and polyethylene glycol."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>59898-180-44</NDCCode>
<PackageDescription>1 KIT in 1 KIT (59898-180-44) * 25 PACKET in 1 CARTON (59898-200-15) > 3.5 mL in 1 PACKET (59898-200-35) </PackageDescription>
<NDC11Code>59898-0180-44</NDC11Code>
<ProductNDC>59898-180</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Iwk-5</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20140612</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>Water-Jel Technologies</LabelerName>
<Status>Active</Status>
<LastUpdate>2017-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140612</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>for the temporary relief of pain associated with minor burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>33342-180-44</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (33342-180-44) </PackageDescription>
<NDC11Code>33342-0180-44</NDC11Code>
<ProductNDC>33342-180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olmesartan Medoxomil</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170425</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204814</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olmesartan medoxomil tablets are indicated for the treatment of hypertension in adults and children six years of age and older, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC).Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal.Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. It may be used alone or in combination with other antihypertensive agents.</IndicationAndUsage>
<Description>Olmesartan medoxomil, USP a prodrug, is hydrolyzed to olmesartan during absorption from the gastrointestinal tract. Olmesartan is a selective AT1 subtype angiotensin II receptor antagonist. Olmesartan medoxomil, USP is described chemically as 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole=-5-carboxylate, cyclic 2,3-carbonate. Its molecular formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil, USP is a white to light yellowish-white powder or crystalline powder with a molecular weight of 558.59. It is practically insoluble in water and sparingly soluble in methanol. Olmesartan medoxomil tablets, USP are available for oral use as film-coated tablets containing 5 mg, 20 mg, or 40 mg of olmesartan medoxomil and the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, sodium starch glycolate, hydroxypropyl cellulose, colloidal silicon dioxide, magnesium stearate, hypromellose, talc, titanium dioxide and iron oxide yellow (5 mg only).</Description>
</NDC>
<NDC>
<NDCCode>75749-052-44</NDCCode>
<PackageDescription>180 mL in 1 TUBE (75749-052-44) </PackageDescription>
<NDC11Code>75749-0052-44</NDC11Code>
<ProductNDC>75749-052</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201102</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>NINGBO PRETTY TOURISM MANUFACTURE CO.,LTD.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0498-4383-01</NDCCode>
<PackageDescription>1 KIT in 1 KIT (0498-4383-01) * .9 g in 1 PACKET * 500 mL in 1 CONTAINER * .4 mL in 1 POUCH (0498-0143-04) * 118 mL in 1 BOTTLE, PLASTIC (59898-420-12) * .9 g in 1 PACKET * 1.4 mL in 1 PACKET (0498-0501-00) * .5 g in 1 PACKET (0498-0750-36) * 118 mL in 1 BOTTLE (0498-0100-02) </PackageDescription>
<NDC11Code>00498-4383-01</NDC11Code>
<ProductNDC>0498-4383</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>4383 First Aid Kit</ProprietaryName>
<NonProprietaryName>4383 First Aid</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Honeywell Safety Products USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is: Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free. Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free.</Description>
</NDC>
<NDC>
<NDCCode>0498-4384-01</NDCCode>
<PackageDescription>1 KIT in 1 KIT (0498-4384-01) * 1.4 mL in 1 PACKET (0498-0501-00) * 500 mL in 1 CONTAINER * .4 mL in 1 POUCH (0498-0143-04) * 118 mL in 1 BOTTLE, PLASTIC (59898-420-12) * .9 g in 1 PACKET * .5 g in 1 PACKET (0498-0750-36) * 118 mL in 1 BOTTLE (0498-0100-02) * .9 g in 1 PACKET (0498-0800-34) </PackageDescription>
<NDC11Code>00498-4384-01</NDC11Code>
<ProductNDC>0498-4384</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>4384 First Aid Kit</ProprietaryName>
<NonProprietaryName>4384 First Aid</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180913</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Honeywell Safety Products USA, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2024-06-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180913</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Each 100 mL contains: Sodium Chloride USP 0.9 g; Water for Injection USP qs. pH adjusted with Hydrochloric Acid NF pH: 5.0 (4.5–7.0) Calculated Osmolarity: 310 mOsmol/liter. Concentration of Electrolytes (mEq/liter): Sodium 154; Chloride 154 0.9% Sodium Chloride Irrigation USP is sterile, nonpyrogenic, isotonic and contains no bacteriostatic or antimicrobial agents. The formula of the active ingredient is: Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free. Ingredient Molecular Formula Molecular Weight Sodium Chloride USP NaCl 58.44. The plastic container is a copolymer of ethylene and propylene formulated and developed for parenteral drugs. The copolymer contains no plasticizers and exhibits virtually no leachability. The plastic container is also virtually impermeable to vapor transmission and, therefore, requires no overwrap to maintain the proper drug concentration. The safety of the plastic container has been confirmed by biological evaluation procedures. The material passes Class Vl testing as specified in the U.S. Pharmacopeia for Biological Tests — Plastic Containers. These tests have shown that the container is nontoxic and biologically inert. The PIC Container is PVC-free and DEHP-free.</Description>
</NDC>
<NDC>
<NDCCode>0023-5853-18</NDCCode>
<PackageDescription>180 CAPSULE, DELAYED RELEASE in 1 BOTTLE (0023-5853-18) </PackageDescription>
<NDC11Code>00023-5853-18</NDC11Code>
<ProductNDC>0023-5853</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Delzicol</ProprietaryName>
<NonProprietaryName>Mesalamine</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160516</StartMarketingDate>
<EndMarketingDate>20250531</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA204412</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MESALAMINE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminosalicylate [EPC], Aminosalicylic Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160516</StartMarketingDatePackage>
<EndMarketingDatePackage>20250531</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>DELZICOL is an aminosalicylate indicated for: 1 Treatment of mildly to moderately active ulcerative colitis in patients 5 years of age and older. (1.1), 2 Maintenance of remission of ulcerative colitis in adults. (1.2).</IndicationAndUsage>
<Description>Each DELZICOL (mesalamine) delayed-release capsule for oral administration contains four 100 mg tablets of mesalamine, an aminosalicylate. DELZICOL (mesalamine) delayed-release capsules contain acrylic based resin, methacrylic acid and methyl methacrylate copolymer (Eudragit S), which dissolves at pH 7 or greater and releases mesalamine in the terminal ileum and beyond for topical anti-inflammatory action in the colon. Mesalamine (also referred to as 5-aminosalicylic acid or 5-ASA) has the chemical name 5-amino-2-hydroxybenzoic acid. Its structural formula is. Inactive Ingredients: Each capsule contains colloidal silicon dioxide, dibutyl sebacate, ferric oxide red (3.44 mg), ferric oxide yellow (0.62 mg), lactose monohydrate, magnesium stearate, methacrylic acid and methyl methancrylate copolymer (Eudragit S), polyethylene glycol, povidone, sodium starch glycolate, talc and hydroxypropyl methylcellulose (HPMC).</Description>
</NDC>
<NDC>
<NDCCode>0074-0576-34</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (0074-0576-34) / 180 TABLET, FILM COATED in 1 BOTTLE</PackageDescription>
<NDC11Code>00074-0576-34</NDC11Code>
<ProductNDC>0074-0576</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Venclexta</ProprietaryName>
<NonProprietaryName>Venetoclax</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160411</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208573</ApplicationNumber>
<LabelerName>AbbVie Inc.</LabelerName>
<SubstanceName>VENETOCLAX</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>BCL-2 Inhibitor [EPC], Increased Cellular Death [PE], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VENCLEXTA is a BCL-2 inhibitor indicated: : 1 For the treatment of adult patients with chronic lymphocytic leukemia (CLL) or small lymphocytic lymphoma (SLL). (1.1) , 2 In combination with azacitidine, or decitabine, or low-dose cytarabine for the treatment of newly diagnosed acute myeloid leukemia (AML) in adults 75 years or older, or who have comorbidities that preclude use of intensive induction chemotherapy. (1.2) .</IndicationAndUsage>
<Description>Venetoclax is a BCL-2 inhibitor. It is a light yellow to dark yellow solid with the empirical formula C45H50ClN7O7S and a molecular weight of 868.44. Venetoclax is described chemically as 4-(4-{[2-(4-chlorophenyl)-4,4-dimethylcyclohex-1-en-1-yl]methyl}piperazin-1-yl)-N-({3-nitro-4-[(tetrahydro-2H-pyran-4-ylmethyl)amino]phenyl}sulfonyl)-2-(1H-pyrrolo[2,3-b]pyridin-5-yloxy)benzamide) and has the following chemical structure:. Venetoclax has very low aqueous solubility. VENCLEXTA tablets for oral use are supplied as pale yellow or beige tablets that contain 10, 50, or 100 mg venetoclax as the active ingredient. Each tablet also contains the following inactive ingredients: copovidone, colloidal silicon dioxide, polysorbate 80, sodium stearyl fumarate, and calcium phosphate dibasic. In addition, the 10 mg and 100 mg coated tablets include the following: iron oxide yellow, polyvinyl alcohol, polyethylene glycol, talc, and titanium dioxide. The 50 mg coated tablets also include the following: iron oxide yellow, iron oxide red, iron oxide black, polyvinyl alcohol, talc, polyethylene glycol and titanium dioxide. Each tablet is debossed with “V” on one side and “10”, “50” or “100” corresponding to the tablet strength on the other side.</Description>
</NDC>
<NDC>
<NDCCode>0115-9930-78</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0115-9930-78) / 25 AMPULE in 1 POUCH (0115-9930-76) / 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00115-9930-78</NDC11Code>
<ProductNDC>0115-9930</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.31</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0115-9931-78</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0115-9931-78) / 25 AMPULE in 1 POUCH (0115-9931-76) / 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00115-9931-78</NDC11Code>
<ProductNDC>0115-9931</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0115-9932-78</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0115-9932-78) / 25 AMPULE in 1 POUCH (0115-9932-76) / 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00115-9932-78</NDC11Code>
<ProductNDC>0115-9932</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20160322</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals of New York LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0378-6993-93</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (0378-6993-93) > 1 VIAL in 1 POUCH (0378-6993-31) > .5 mL in 1 VIAL</PackageDescription>
<NDC11Code>00378-6993-93</NDC11Code>
<ProductNDC>0378-6993</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20090828</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078309</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090828</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol inhalation solution (concentrate) is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol inhalation solution, USP (concentrate) is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol hydrochloride is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol hydrochloride is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol hydrochloride is 275.8, and its molecular formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol hydrochloride is the USAN modified name for (R)-albuterol hydrochloride in the United States. Levalbuterol inhalation solution (concentrate) is supplied in 0.5 mL individually-wrapped unit-dose vials that must be diluted with normal saline before administration by nebulization. Each 0.5 mL unit-dose vial contains 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol hydrochloride), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a chelating agent and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0378-9690-52</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0378-9690-52) > 25 AMPULE in 1 POUCH (0378-9690-62) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9690-52</NDC11Code>
<ProductNDC>0378-9690</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.31</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0378-9691-52</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0378-9691-52) > 25 AMPULE in 1 POUCH (0378-9691-62) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9691-52</NDC11Code>
<ProductNDC>0378-9691</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0378-9692-52</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (0378-9692-52) > 25 AMPULE in 1 POUCH (0378-9692-62) > 3 mL in 1 AMPULE</PackageDescription>
<NDC11Code>00378-9692-52</NDC11Code>
<ProductNDC>0378-9692</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20180910</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-04-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180910</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta 2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α 1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3∙HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>0409-4179-05</NDCCode>
<PackageDescription>6 BAG in 1 CASE (0409-4179-05) > 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00409-4179-05</NDC11Code>
<ProductNDC>0409-4179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn-pf</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19861017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019492</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE</SubstanceName>
<StrengthNumber>760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC],Amino Acids [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-05-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19861017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0440-7200-92</NDCCode>
<PackageDescription>180 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (0440-7200-92)</PackageDescription>
<NDC11Code>00440-7200-92</NDC11Code>
<ProductNDC>0440-7200</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080312</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077455</ApplicationNumber>
<LabelerName>Liberty Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets, USP (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets, USP (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets, USP (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets, USP (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl)amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets, USP (SR) are supplied for oral administration as 100-mg (yellow), 150-mg (pale yellow), and 200-mg (pale yellow), film-coated, sustained-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: copovidone, colloidal silicon dioxide, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, titanium dioxide, triacetin. In addition, the 100 mg tablets contains D&C Yellow #10 Aluminum Lake and FD&C Yellow #6 Aluminum Lake, the 150 mg and 200 mg tablets contain iron oxide yellow. USP Dissolution Test 2 is used.</Description>
</NDC>
<NDC>
<NDCCode>0781-2695-44</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (0781-2695-44) > 14 CAPSULE in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00781-2695-44</NDC11Code>
<ProductNDC>0781-2695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Temozolomide</ProprietaryName>
<NonProprietaryName>Temozolomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130812</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA021029</ApplicationNumber>
<LabelerName>Sandoz Inc.</LabelerName>
<SubstanceName>TEMOZOLOMIDE</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-11-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0990-4179-05</NDCCode>
<PackageDescription>6 BAG in 1 CASE (0990-4179-05) / 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>00990-4179-05</NDC11Code>
<ProductNDC>0990-4179</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aminosyn-pf</ProprietaryName>
<NonProprietaryName>Isoleucine, Leucine, Lysine Acetate, Methionine, Phenylalanine, Threonine, Tryptophan, Valine, Alanine, Arginine, Aspartic Acid, Glutamic Acid, Glycine, Histidine, Proline, Serine, Taurine, And Tyrosine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20191101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019492</ApplicationNumber>
<LabelerName>ICU Medical Inc.</LabelerName>
<SubstanceName>ISOLEUCINE; LEUCINE; LYSINE ACETATE; METHIONINE; PHENYLALANINE; THREONINE; TRYPTOPHAN; VALINE; ALANINE; ARGININE; ASPARTIC ACID; GLUTAMIC ACID; GLYCINE; HISTIDINE; PROLINE; SERINE; TAURINE; TYROSINE</SubstanceName>
<StrengthNumber>760; 1200; 677; 180; 427; 512; 180; 673; 698; 1227; 527; 820; 385; 312; 812; 495; 70; 44</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Aminosyn-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is indicated for the nutritional support of infants (including those of low birth weight) and young children requiring TPN via either central or peripheral infusion routes. Parenteral nutrition with Aminosyn-PF 10% is indicated to prevent nitrogen and weight loss or treat negative nitrogen balance in infants and young children where (1) the alimentary tract by the oral gastrostomy, or jejunostomy route, cannot or should not be used or adequate protein intake is not feasible by these routes; (2) gastrointestinal absorption of protein is impaired; or (3) protein requirements are substantially increased as with extensive burns. Dosage, route of administration, and concomitant infusion of non-protein calories are dependent on various factors, such as nutritional and metabolic status of the patient, anticipated duration of parenteral nutrition support, and vein tolerance. See DOSAGE AND ADMINISTRATION for additional information. Central Venous Infusion. Central venous infusion should be considered when amino acid solutions are to be admixed with hypertonic dextrose to promote protein synthesis in hypercatabolic or severely depleted infants or those requiring long-term parenteral nutrition. Peripheral Parenteral Nutrition. For moderately catabolic or depleted patients in whom the central venous route is not indicated, diluted amino acid solutions mixed with 5 to 10% dextrose solutions may be infused by peripheral vein, supplemented, if desired, with fat emulsion.</IndicationAndUsage>
<Description>Aminosyn®-PF 10%, Sulfite-Free, (an amino acid injection — pediatric formula) is a sterile, nonpyrogenic solution for intravenous infusion. Aminosyn-PF 10% is oxygen sensitive. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for use only in a pharmacy bulk admixture program. The formulation is described below. The formulas for the individual amino acids present in Aminosyn-PF 10% are as follows:. The flexible plastic container is fabricated from a specially formulated polyvinylchloride. Water can permeate from inside the container into the overwrap but not in amounts sufficient to affect the solution significantly. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. Exposure to temperatures above 25°C/77°F during transport and storage will lead to minor losses in moisture content. Higher temperatures lead to greater losses. It is unlikely that these minor losses will lead to clinically significant changes within the expiration period. The Pharmacy Bulk Package is designed for use with manual, gravity flow operations and automated compounding devices for preparing sterile parenteral nutrient admixtures; it contains no bacteriostat. Multiple single doses may be dispensed during continual aliquoting operations. Withdrawal of container contents should be promptly completed within 4 hours after initial closure puncture.</Description>
</NDC>
<NDC>
<NDCCode>16590-700-82</NDCCode>
<PackageDescription>180 TABLET in 1 BOTTLE (16590-700-82)</PackageDescription>
<NDC11Code>16590-0700-82</NDC11Code>
<ProductNDC>16590-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071218</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077397</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder– Sertraline hydrochloride is indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-IIIR/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, microcrystalline cellulose, magnesium stearate, opadry green (titanium dioxide, hypromellose 3cP, hypromellose 6cP, Macrogol/Peg 400, Polysorbate 80, D&C Yellow # 10 Aluminum Lake, and FD&C Blue # 2/Indigo Carmine Aluminum Lake for 25mg tablet), opadry light blue (hypromellose 3cP, hypromellose 6cP, titanium dioxide, Macrogol/Peg 400, FD&C Blue # 2/Indigo Carmine Aluminum Lake and Polysorbate 80 for 50 mg tablet), opadry yellow (hypromellose 3cP, hypromellose 6cP, titanium dioxide, Macrogol/Peg 400, Polysorbate 80, Iron Oxide Yellow, Iron oxide Red for 100mg tablet) and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>17478-171-30</NDCCode>
<PackageDescription>30 POUCH in 1 CARTON (17478-171-30) > 1 VIAL, SINGLE-DOSE in 1 POUCH (17478-171-01) > .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>17478-0171-30</NDC11Code>
<ProductNDC>17478-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xopenex</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020837</ApplicationNumber>
<LabelerName>Akorn</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XOPENEX (levalbuterol HCl) Inhalation Solution Concentrate is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>XOPENEX Inhalation Solution Concentrate is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution Concentrate is supplied in 0.5 mL unit-dose vials that must be diluted with normal saline before administration by nebulization. Each 0.5 mL unit-dose vial contains 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and hydrochloric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>17478-172-24</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (17478-172-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-172-12) > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>17478-0172-24</NDC11Code>
<ProductNDC>17478-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xopenex</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020837</ApplicationNumber>
<LabelerName>Akorn</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.31</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>17478-173-24</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (17478-173-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-173-12) > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>17478-0173-24</NDC11Code>
<ProductNDC>17478-173</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xopenex</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020837</ApplicationNumber>
<LabelerName>Akorn</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>17478-174-24</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (17478-174-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH (17478-174-12) > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>17478-0174-24</NDC11Code>
<ProductNDC>17478-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xopenex</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20150227</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020837</ApplicationNumber>
<LabelerName>Akorn</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150227</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>XOPENEX (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>XOPENEX Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl) amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. XOPENEX Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>21695-153-24</NDCCode>
<PackageDescription>2 POUCH in 1 CARTON (21695-153-24) > 12 VIAL, SINGLE-DOSE in 1 POUCH > 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>21695-0153-24</NDC11Code>
<ProductNDC>21695-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xopenex</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19990401</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020837</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA],beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Xopenex (levalbuterol HCl) Inhalation Solution is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Xopenex (levalbuterol HCl) Inhalation Solution is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist (see CLINICAL PHARMACOLOGY). The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows:. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Xopenex (levalbuterol HCl) Inhalation Solution is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg of levalbuterol (as 0.36 mg of levalbuterol HCl) or 0.63 mg of levalbuterol (as 0.73 mg of levalbuterol HCl) or 1.25 mg of levalbuterol (as 1.44 mg of levalbuterol HCl), sodium chloride to adjust tonicity, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>24979-160-44</NDCCode>
<PackageDescription>120 TABLET, DELAYED RELEASE in 1 BOTTLE (24979-160-44) </PackageDescription>
<NDC11Code>24979-0160-44</NDC11Code>
<ProductNDC>24979-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolic Acid</ProprietaryName>
<NonProprietaryName>Mycophenolic Acid</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<EndMarketingDate>20260930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214289</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>MYCOPHENOLATE SODIUM</SubstanceName>
<StrengthNumber>180</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolic acid delayed-release tablets are an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. (1.1). Use in combination with cyclosporine and corticosteroids. (1.1).</IndicationAndUsage>
<Description>Mmycophenolic acid delayed-release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5-yl)-4-methylhex-4-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, USP as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1N hydrochloric acid. Mycophenolic acid is available for oral use as delayed-release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include crospovidone, hypromellose, lactose anhydrous, magnesium stearate, povidone, and starch. The enteric coating of the tablet consists of hypromellose phthalate, titanium dioxide, triethyl citrate, ferrosoferric oxide (180 mg), lactose monohydrate (180 mg), propylene glycol (180 mg) and triacetin (180 mg) or polyethylene glycol (360 mg), talc (360 mg), and FD&C yellow # 6 aluminum lake (360 mg).</Description>
</NDC>
<NDC>
<NDCCode>24979-161-44</NDCCode>
<PackageDescription>120 TABLET, DELAYED RELEASE in 1 BOTTLE (24979-161-44) </PackageDescription>
<NDC11Code>24979-0161-44</NDC11Code>
<ProductNDC>24979-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mycophenolic Acid</ProprietaryName>
<NonProprietaryName>Mycophenolic Acid</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<EndMarketingDate>20260930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214289</ApplicationNumber>
<LabelerName>Upsher-Smith Laboratories, LLC</LabelerName>
<SubstanceName>MYCOPHENOLATE SODIUM</SubstanceName>
<StrengthNumber>360</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimetabolite Immunosuppressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20211108</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mycophenolic acid delayed-release tablets are an antimetabolite immunosuppressant indicated for prophylaxis of organ rejection in adult patients receiving kidney transplants and in pediatric patients at least 5 years of age and older who are at least 6 months post kidney transplant. (1.1). Use in combination with cyclosporine and corticosteroids. (1.1).</IndicationAndUsage>
<Description>Mmycophenolic acid delayed-release tablets, USP are an enteric formulation of mycophenolate sodium that delivers the active moiety mycophenolic acid (MPA). Mycophenolic acid is an immunosuppressive agent. As the sodium salt, MPA is chemically designated as (E)-6-(4-hydroxy-6-methoxy-7-methyl-3-oxo-1,3-dihydroisobenzofuran-5-yl)-4-methylhex-4-enoic acid sodium salt. Its empirical formula is C17H19O6Na. The molecular weight is 342.32 g/mol and the structural formula is. Mycophenolic acid, USP as the sodium salt, is a white to off-white, crystalline powder and is highly soluble in aqueous media at physiological pH and practically insoluble in 0.1N hydrochloric acid. Mycophenolic acid is available for oral use as delayed-release tablets containing either 180 mg or 360 mg of mycophenolic acid. Inactive ingredients include crospovidone, hypromellose, lactose anhydrous, magnesium stearate, povidone, and starch. The enteric coating of the tablet consists of hypromellose phthalate, titanium dioxide, triethyl citrate, ferrosoferric oxide (180 mg), lactose monohydrate (180 mg), propylene glycol (180 mg) and triacetin (180 mg) or polyethylene glycol (360 mg), talc (360 mg), and FD&C yellow # 6 aluminum lake (360 mg).</Description>
</NDC>
<NDC>
<NDCCode>35573-443-25</NDCCode>
<PackageDescription>25 POUCH in 1 CARTON (35573-443-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>35573-0443-25</NDC11Code>
<ProductNDC>35573-443</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Burel Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.31</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>35573-444-25</NDCCode>
<PackageDescription>25 POUCH in 1 CARTON (35573-444-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>35573-0444-25</NDC11Code>
<ProductNDC>35573-444</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Burel Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.63</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>35573-445-25</NDCCode>
<PackageDescription>25 POUCH in 1 CARTON (35573-445-25) / 25 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>35573-0445-25</NDC11Code>
<ProductNDC>35573-445</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levalbuterol</ProprietaryName>
<NonProprietaryName>Levalbuterol Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20210401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203653</ApplicationNumber>
<LabelerName>Burel Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LEVALBUTEROL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levalbuterol Inhalation Solution, USP is indicated for the treatment or prevention of bronchospasm in adults, adolescents, and children 6 years of age and older with reversible obstructive airway disease.</IndicationAndUsage>
<Description>Levalbuterol Inhalation Solution, USP is a sterile, clear, colorless, preservative-free solution of the hydrochloride salt of levalbuterol, the (R)-enantiomer of the drug substance racemic albuterol. Levalbuterol HCl is a relatively selective beta2-adrenergic receptor agonist [see Clinical Pharmacology (12)]. The chemical name for levalbuterol HCl is (R)-α1-[[(1,1-dimethylethyl)amino]methyl]-4-hydroxy-1,3-benzenedimethanol hydrochloride, and its established chemical structure is as follows. The molecular weight of levalbuterol HCl is 275.8, and its empirical formula is C13H21NO3HCl. It is a white to off-white, crystalline solid, with a melting point of approximately 187°C and solubility of approximately 180 mg/mL in water. Levalbuterol HCl is the USAN modified name for (R)-albuterol HCl in the United States. Levalbuterol Inhalation Solution, USP is supplied in unit-dose vials and requires no dilution before administration by nebulization. Each 3 mL unit-dose vial contains 0.31 mg/3 mL (0.0103%) of levalbuterol (as 0.36 mg/3 mL of levalbuterol HCl) or 0.63 mg/3 mL (0.021%) of levalbuterol (as 0.73 mg/3 mL of levalbuterol HCl) or 1.25 mg/3 mL (0.042%) of levalbuterol (as 1.44 mg/3 mL of levalbuterol HCl), sodium chloride to adjust tonicity, edetate disodium (EDTA) as a stabilizer for the active pharmaceutical ingredient, and sulfuric acid to adjust the pH to 4.0 (3.3 to 4.5).</Description>
</NDC>
<NDC>
<NDCCode>43353-546-80</NDCCode>
<PackageDescription>180 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (43353-546-80)</PackageDescription>
<NDC11Code>43353-0546-80</NDC11Code>
<ProductNDC>43353-546</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079095</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC],Dopamine Uptake Inhibitors [MoA],Increased Dopamine Activity [PE],Increased Norepinephrine Activity [PE],Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are indicated for the treatment of major depressive disorder. The efficacy of bupropion in the treatment of a major depressive episode was established in two 4-week controlled trials of depressed inpatients and in one 6-week controlled trial of depressed outpatients whose diagnoses corresponded most closely to the Major Depression category of the APA Diagnostic and Statistical Manual (DSM) (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies the presence of 1) depressed mood or 2) loss of interest or pleasure; in addition, at least 5 of the following symptoms have been present during the same 2-week period and represent a change from previous functioning: depressed mood, markedly diminished interest or pleasure in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The efficacy of bupropion hydrochloride extended-release tablets (SR) in maintaining an antidepressant response for up to 44 weeks following 8 weeks of acute treatment was demonstrated in a placebo-controlled trial (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use bupropion hydrochloride extended-release tablets (SR) for extended periods should periodically reevaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1- dimethylethyl)amino]-1 -propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, and highly soluble in water. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100 mg, 150 mg, and 200 mg white to off-white, film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the following inactive ingredients: hydroxypropyl cellulose, microcrystalline cellulose, colloidal silicon dioxide, stearic acid, magnesium stearate, and diluted hydrochloric acid. The film coating contains lactose monohydrate, hydroxypropyl cellulose, titanium dioxide, and polyethylene glycol.</Description>
</NDC>
</NDCList>