{
"NDC": [
{
"NDCCode": "61314-625-94",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61314-625-94) / .05 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61314-0625-94",
"ProductNDC": "61314-625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cimerli",
"NonProprietaryName": "Ranibizumab-eqrn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "20241212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761165",
"LabelerName": "Sandoz Inc",
"SubstanceName": "RANIBIZUMAB",
"StrengthNumber": ".5",
"StrengthUnit": "mg/.05mL",
"Pharm_Classes": "Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241212",
"SamplePackage": "N",
"IndicationAndUsage": "CIMERLI is indicated for the treatment of patients with.",
"Description": "Ranibizumab-eqrn is a recombinant humanized IgG1 kappa isotype monoclonal antibody fragment designed for intraocular use. Ranibizumab-eqrn binds to and inhibits the biologic activity of human vascular endothelial growth factor A (VEGF-A). Ranibizumab-eqrn, which lacks an Fc region, has a molecular weight of approximately 48 kilodaltons and is produced by an E. coli expression system. CIMERLI (ranibizumab-eqrn) injection is a sterile, colorless to pale yellow solution in a single-dose glass vial for intravitreal injection. CIMERLI is supplied as a preservative-free, sterile solution in a single-dose container designed to deliver 0.05 mL of 10 mg/mL ranibizumab-eqrn (0.5 mg dose vial) or 6 mg/mL ranibizumab-eqrn (0.3 mg dose vial) aqueous solution with 10 mM histidine HCl, 10% α,α trehalose dihydrate, 0.01% polysorbate 20, pH 5.5."
},
{
"NDCCode": "49035-625-94",
"PackageDescription": "118 mL in 1 CONTAINER (49035-625-94) ",
"NDC11Code": "49035-0625-94",
"ProductNDC": "49035-625",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Equate Itch Relief Gel",
"NonProprietaryName": "Itch Relief Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181220",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Walmart, Inc",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181220",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily relieves pain due to: Minor burns, insect bites, sunburn, minor skin irritation, minor cuts, scrapes, rashes due to poison ivy, poison oak and poison sumac."
},
{
"NDCCode": "68462-625-94",
"PackageDescription": "100 g in 1 CAN (68462-625-94) ",
"NDC11Code": "68462-0625-94",
"ProductNDC": "68462-625",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clobetasol Propionate",
"NonProprietaryName": "Clobetasol Propionate",
"DosageFormName": "AEROSOL, FOAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20190909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211450",
"LabelerName": "Glenmark Pharmaceuticals Inc., USA",
"SubstanceName": "CLOBETASOL PROPIONATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190909",
"SamplePackage": "N",
"IndicationAndUsage": "Clobetasol propionate emulsion foam is indicated for the treatment of inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 12 years and older.",
"Description": "Clobetasol Propionate Emulsion Foam, 0.05% is a white to off-white emulsion aerosol foam containing the active ingredient clobetasol propionate, USP, a synthetic corticosteroid for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate, USP is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, with the empirical formula C25H32ClFO5, and a molecular weight of 467 g/mol. The following is the chemical structure. Clobetasol Propionate, USP. Clobetasol propionate, USP is a white to almost white crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Each gram of Clobetasol Propionate Emulsion Foam, 0.05% contains 0.5 mg clobetasol propionate, USP. The foam also contains anhydrous citric acid, cetyl alcohol, cyclomethicone, isopropyl myristate, light mineral oil, polyoxyl-20 cetostearyl ether, potassium citrate, propylene glycol, purified water, sorbitan monolaurate, white petrolatum, and phenoxyethanol as a preservative. Clobetasol Propionate Emulsion Foam is dispensed from an aluminum can pressurized with a hydrocarbon (propane/butane) propellant."
},
{
"NDCCode": "61314-228-94",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61314-228-94) / 1.7 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61314-0228-94",
"ProductNDC": "61314-228",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Wyost",
"NonProprietaryName": "Denosumab",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250602",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761362",
"LabelerName": "Sandoz Inc",
"SubstanceName": "DENOSUMAB",
"StrengthNumber": "120",
"StrengthUnit": "mg/1.7mL",
"Pharm_Classes": "RANK Ligand Blocking Activity [MoA], RANK Ligand Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250602",
"SamplePackage": "N",
"IndicationAndUsage": "Wyost is a RANK ligand (RANKL) inhibitor indicated for: 1 Prevention of skeletal-related events in patients with multiple myeloma and in patients with bone metastases from solid tumors. (1.1), 2 Treatment of adults and skeletally mature adolescents with giant cell tumor of bone that is unresectable or where surgical resection is likely to result in severe morbidity. (1.2, 14.3), 3 Treatment of hypercalcemia of malignancy refractory to bisphosphonate therapy. (1.3).",
"Description": "Denosumab-bbdz is a human IgG2 monoclonal antibody that binds to human RANKL. Denosumab-bbdz has an approximate molecular weight of 147 kDa and is produced in genetically engineered mammalian (Chinese hamster ovary) cells. Wyost (denosumab-bbdz) injection is a sterile, preservative-free, clear to slightly opalescent and colorless to slightly yellowish to slightly brownish solution for subcutaneous use. Each single-dose vial contains 1.7 mL solution of 120 mg denosumab-bbdz, glacial acetic acid (1.85 mg), polysorbate 20 (0.17 mg), sodium hydroxide (0.91 mg), sorbitol (78.9 mg), and Water for Injection (USP). Hydrochloric acid and sodium hydroxide may be added to adjust the pH to 5.2."
},
{
"NDCCode": "61314-531-64",
"PackageDescription": "2 KIT in 1 CARTON (61314-531-64) / 1 KIT in 1 KIT * 1 SYRINGE, GLASS in 1 CARTON (61314-454-94) / .8 mL in 1 SYRINGE, GLASS * 1 SYRINGE, GLASS in 1 CARTON (61314-473-94) / .4 mL in 1 SYRINGE, GLASS",
"NDC11Code": "61314-0531-64",
"ProductNDC": "61314-531",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hyrimoz",
"NonProprietaryName": "Adalimumab-adaz",
"DosageFormName": "KIT",
"StartMarketingDate": "20230701",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761071",
"LabelerName": "Sandoz Inc",
"Status": "Active",
"LastUpdate": "2026-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230701",
"SamplePackage": "N",
"Description": "Adalimumab-adaz is a tumor necrosis factor blocker. Adalimumab-adaz is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-adaz is produced by recombinant DNA technology in a Chinese hamster ovary cell expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HYRIMOZ (adalimumab-adaz) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (Sensoready Pen) as a single-dose, prefilled 1 mL glass syringe with needle guard and add-on finger flange or as a single-dose, prefilled 1 mL glass syringe. Enclosed within the Pen is a single-dose, 1 mL prefilled glass syringe. The solution of HYRIMOZ is clear, colorless or slightly yellowish, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of HYRIMOZ contains adalimumab-adaz (80 mg), adipic acid (1.75 mg), mannitol (33.6 mg), polysorbate 80 (0.32 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of HYRIMOZ contains adalimumab-adaz (40 mg), adipic acid (0.88 mg), mannitol (16.8 mg), polysorbate 80 (0.16 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 40 mg/0.8 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HYRIMOZ contains adalimumab-adaz (40 mg), adipic acid (2.69 mg), citric acid monohydrate (0.206 mg), mannitol (9.6 mg), polysorbate 80 (0.8 mg), sodium chloride (4.93 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HYRIMOZ contains adalimumab-adaz (20 mg), adipic acid (1.34 mg), citric acid monohydrate (0.103 mg), mannitol (4.8 mg), polysorbate 80 (0.4 mg), sodium chloride (2.46 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of HYRIMOZ contains adalimumab-adaz (20 mg), adipic acid (0.44 mg), mannitol (8.4 mg), polysorbate 80 (0.08 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 10 mg/0.1 mL prefilled syringe delivers 0.1 mL (10 mg) of drug product. Each 0.1 mL of HYRIMOZ contains adalimumab-adaz (10 mg), adipic acid (0.22 mg), mannitol (4.2 mg), polysorbate 80 (0.04 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH."
},
{
"NDCCode": "61314-543-94",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61314-543-94) / 15 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61314-0543-94",
"ProductNDC": "61314-543",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tyruko",
"NonProprietaryName": "Natalizumab-sztn",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251117",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761322",
"LabelerName": "Sandoz Inc",
"SubstanceName": "NATALIZUMAB",
"StrengthNumber": "300",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Integrin Receptor Antagonist [EPC], Integrin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251117",
"SamplePackage": "N",
"IndicationAndUsage": "TYRUKO is an integrin receptor antagonist indicated for treatment of:. Multiple Sclerosis (MS). TYRUKO is indicated as monotherapy for the treatment of relapsing forms of multiple sclerosis, to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. Natalizumab products increase the risk of PML [see Warnings and Precautions (5.1)]. When initiating and continuing treatment with TYRUKO, physicians should consider whether the expected benefit of TYRUKO is sufficient to offset this risk. (1.1). Crohn's Disease (CD): 1 TYRUKO is indicated for inducing and maintaining clinical response and remission in adult patients with moderately to severely active Crohn's disease with evidence of inflammation who have had an inadequate response to, or are unable to tolerate, conventional CD therapies and inhibitors of TNF-α. (1.2) .",
"Description": "Natalizumab-sztn is a recombinant humanized IgG4ĸ monoclonal antibody produced in a Chinese hamster ovary (CHO) mammalian cell expression system. Natalizumab-sztn contains human framework regions and the complementarity-determining regions of an antibody that binds to α4-integrin. The molecular weight of natalizumab-sztn is 149 kilodaltons. TYRUKO (natalizumab-sztn) injection is supplied as a sterile, preservative-free, colorless, and clear to slightly opalescent solution for intravenous infusion. Each 15 mL of solution contains 300 mg natalizumab-sztn; histidine (6.36 mg); L-histidine hydrochloride monohydrate (22.86 mg); polysorbate 80, USP/NF (3 mg); sodium chloride, USP (131.49 mg); and Water for Injection, USP at pH 5.7."
},
{
"NDCCode": "61314-624-94",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61314-624-94) / .05 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61314-0624-94",
"ProductNDC": "61314-624",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cimerli",
"NonProprietaryName": "Ranibizumab-eqrn",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVITREAL",
"StartMarketingDate": "20241212",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761165",
"LabelerName": "Sandoz Inc",
"SubstanceName": "RANIBIZUMAB",
"StrengthNumber": ".3",
"StrengthUnit": "mg/.05mL",
"Pharm_Classes": "Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241212",
"SamplePackage": "N",
"IndicationAndUsage": "CIMERLI is indicated for the treatment of patients with.",
"Description": "Ranibizumab-eqrn is a recombinant humanized IgG1 kappa isotype monoclonal antibody fragment designed for intraocular use. Ranibizumab-eqrn binds to and inhibits the biologic activity of human vascular endothelial growth factor A (VEGF-A). Ranibizumab-eqrn, which lacks an Fc region, has a molecular weight of approximately 48 kilodaltons and is produced by an E. coli expression system. CIMERLI (ranibizumab-eqrn) injection is a sterile, colorless to pale yellow solution in a single-dose glass vial for intravitreal injection. CIMERLI is supplied as a preservative-free, sterile solution in a single-dose container designed to deliver 0.05 mL of 10 mg/mL ranibizumab-eqrn (0.5 mg dose vial) or 6 mg/mL ranibizumab-eqrn (0.3 mg dose vial) aqueous solution with 10 mM histidine HCl, 10% α,α trehalose dihydrate, 0.01% polysorbate 20, pH 5.5."
},
{
"NDCCode": "61314-651-94",
"PackageDescription": "1 VIAL in 1 CARTON (61314-651-94) / .5 mL in 1 VIAL",
"NDC11Code": "61314-0651-94",
"ProductNDC": "61314-651",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pyzchiva",
"NonProprietaryName": "Ustekinumab-ttwe",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20250222",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761373",
"LabelerName": "SANDOZ INC",
"SubstanceName": "USTEKINUMAB",
"StrengthNumber": "45",
"StrengthUnit": "mg/.5mL",
"Pharm_Classes": "Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250623",
"SamplePackage": "N",
"IndicationAndUsage": "PYZCHIVA is a human interleukin-12 and -23 antagonist indicated for the treatment of:Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn's disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).",
"Description": "Ustekinumab-ttwe, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-ttwe is produced in a Chinese hamster ovary cell line. The manufacturing process contains steps for the clearance of viruses. Ustekinumab-ttwe is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. PYZCHIVA (ustekinumab-ttwe) injection is a clear, colorless to light yellow, sterile and preservative-free solution with pH of 5.7– 6.3. PYZCHIVA for Subcutaneous Use. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29 gauge fixed ½ inch needle and as 45 mg of ustekinumab-ttwe in 0.5 mL in a single-dose Type I glass vial with a coated stopper. The syringe is fitted with a passive needle guard and a needle cover. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled autoinjector. Each 0.5 mL prefilled syringe, prefilled PYZCHIVA AUTOINJECTOR or vial delivers 45 mg ustekinumab-ttwe, histidine (0.095 mg), histidine hydrochloride monohydrate (0.405 mg), polysorbate 80 (0.02 mg), and sucrose (42.5 mg). Each 1 mL prefilled syringe or prefilled PYZCHIVA AUTOINJECTOR delivers 90 mg ustekinumab-ttwe, histidine (0.19 mg), histidine hydrochloride monohydrate (0.81 mg), polysorbate 80 (0.04 mg), and sucrose (85 mg). PYZCHIVA for Intravenous Infusion. Available as 130 mg of ustekinumab-ttwe in 26 mL, supplied as a single-dose Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-ttwe, edetate disodium (0.52 mg), histidine (20 mg), histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg) and sucrose (2,210 mg)."
},
{
"NDCCode": "61314-654-94",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (61314-654-94) / 26 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "61314-0654-94",
"ProductNDC": "61314-654",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pyzchiva",
"NonProprietaryName": "Ustekinumab-ttwe",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250222",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761425",
"LabelerName": "SANDOZ INC",
"SubstanceName": "USTEKINUMAB",
"StrengthNumber": "130",
"StrengthUnit": "mg/26mL",
"Pharm_Classes": "Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250222",
"SamplePackage": "N",
"IndicationAndUsage": "PYZCHIVA is a human interleukin-12 and -23 antagonist indicated for the treatment of:Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn's disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).",
"Description": "Ustekinumab-ttwe, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-ttwe is produced in a Chinese hamster ovary cell line. The manufacturing process contains steps for the clearance of viruses. Ustekinumab-ttwe is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. PYZCHIVA (ustekinumab-ttwe) injection is a clear, colorless to light yellow, sterile and preservative-free solution with pH of 5.7– 6.3. PYZCHIVA for Subcutaneous Use. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29 gauge fixed ½ inch needle and as 45 mg of ustekinumab-ttwe in 0.5 mL in a single-dose Type I glass vial with a coated stopper. The syringe is fitted with a passive needle guard and a needle cover. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled autoinjector. Each 0.5 mL prefilled syringe, prefilled PYZCHIVA AUTOINJECTOR or vial delivers 45 mg ustekinumab-ttwe, histidine (0.095 mg), histidine hydrochloride monohydrate (0.405 mg), polysorbate 80 (0.02 mg), and sucrose (42.5 mg). Each 1 mL prefilled syringe or prefilled PYZCHIVA AUTOINJECTOR delivers 90 mg ustekinumab-ttwe, histidine (0.19 mg), histidine hydrochloride monohydrate (0.81 mg), polysorbate 80 (0.04 mg), and sucrose (85 mg). PYZCHIVA for Intravenous Infusion. Available as 130 mg of ustekinumab-ttwe in 26 mL, supplied as a single-dose Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-ttwe, edetate disodium (0.52 mg), histidine (20 mg), histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg) and sucrose (2,210 mg)."
},
{
"NDCCode": "0378-3349-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3349-99) / 1 PATCH in 1 POUCH (0378-3349-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3349-99",
"ProductNDC": "0378-3349",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050407",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3350-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3350-99) / 1 PATCH in 1 POUCH (0378-3350-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3350-99",
"ProductNDC": "0378-3350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000301",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3351-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3351-99) / 1 PATCH in 1 POUCH (0378-3351-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3351-99",
"ProductNDC": "0378-3351",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050407",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3352-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3352-99) / 1 PATCH in 1 POUCH (0378-3352-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3352-99",
"ProductNDC": "0378-3352",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000301",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3360-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3360-99) / 1 PATCH in 1 POUCH (0378-3360-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3360-99",
"ProductNDC": "0378-3360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060809",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "0378-3361-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-3361-99) / 1 PATCH in 1 POUCH (0378-3361-16) / 7 d in 1 PATCH",
"NDC11Code": "00378-3361-99",
"ProductNDC": "0378-3361",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".06",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060809",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "21130-147-94",
"PackageDescription": "140 TABLET in 1 BOTTLE (21130-147-94)",
"NDC11Code": "21130-0147-94",
"ProductNDC": "21130-147",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fiber Laxative",
"NonProprietaryName": "Calcium Polycarbophil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150505",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part334",
"LabelerName": "Safeway",
"SubstanceName": "CALCIUM POLYCARBOPHIL",
"StrengthNumber": "625",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours."
},
{
"NDCCode": "24338-001-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (24338-001-30) ",
"NDC11Code": "24338-0001-30",
"ProductNDC": "24338-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Widaplik",
"NonProprietaryName": "Telmisartan, Amlodipine And Indapamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219423",
"LabelerName": "Azurity Pharmaceuticals, Inc.",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE",
"StrengthNumber": "10; 1.25; .625",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.",
"Description": "Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide."
},
{
"NDCCode": "24338-002-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (24338-002-30) ",
"NDC11Code": "24338-0002-30",
"ProductNDC": "24338-002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Widaplik",
"NonProprietaryName": "Telmisartan, Amlodipine And Indapamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219423",
"LabelerName": "Azurity Pharmaceuticals, Inc.",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE",
"StrengthNumber": "20; 2.5; 1.25",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.",
"Description": "Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide."
},
{
"NDCCode": "24338-003-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (24338-003-30) ",
"NDC11Code": "24338-0003-30",
"ProductNDC": "24338-003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Widaplik",
"NonProprietaryName": "Telmisartan, Amlodipine And Indapamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA219423",
"LabelerName": "Azurity Pharmaceuticals, Inc.",
"SubstanceName": "TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE",
"StrengthNumber": "40; 5; 2.5",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251020",
"SamplePackage": "N",
"IndicationAndUsage": "Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.",
"Description": "Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide."
},
{
"NDCCode": "41163-147-94",
"PackageDescription": "140 TABLET in 1 BOTTLE (41163-147-94) ",
"NDC11Code": "41163-0147-94",
"ProductNDC": "41163-147",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fiber Laxative",
"NonProprietaryName": "Calcium Polycarbophil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180824",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "UNITED NATURAL FOODS, INC. DBA UNFI",
"SubstanceName": "CALCIUM POLYCARBOPHIL",
"StrengthNumber": "625",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180824",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours."
},
{
"NDCCode": "49035-147-94",
"PackageDescription": "140 TABLET in 1 BOTTLE (49035-147-94) ",
"NDC11Code": "49035-0147-94",
"ProductNDC": "49035-147",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fiber Therapy",
"NonProprietaryName": "Calcium Polycarbophil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "Wal-Mart Stores, Inc.",
"SubstanceName": "CALCIUM POLYCARBOPHIL",
"StrengthNumber": "625",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131101",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours."
},
{
"NDCCode": "50090-7611-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7611-0) / 1 PATCH in 1 POUCH / 7 d in 1 PATCH",
"NDC11Code": "50090-7611-00",
"ProductNDC": "50090-7611",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".05",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250722",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50090-7984-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7984-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-7984-00",
"ProductNDC": "50090-7984",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20000301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".1",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260601",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50090-7985-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7985-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-7985-00",
"ProductNDC": "50090-7985",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".025",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260602",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50090-7986-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7986-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-7986-00",
"ProductNDC": "50090-7986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20050407",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".075",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50090-7987-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7987-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-7987-00",
"ProductNDC": "50090-7987",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".0375",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50090-7988-0",
"PackageDescription": "4 POUCH in 1 CARTON (50090-7988-0) / 1 d in 1 POUCH",
"NDC11Code": "50090-7988-00",
"ProductNDC": "50090-7988",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20060809",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "A-S Medication Solutions",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".06",
"StrengthUnit": "mg/d",
"Pharm_Classes": "Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260603",
"SamplePackage": "N",
"IndicationAndUsage": "Estradiol transdermal system continuous delivery (once-weekly) is indicated for.",
"Description": "Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "50804-147-94",
"PackageDescription": "140 TABLET in 1 BOTTLE (50804-147-94) ",
"NDC11Code": "50804-0147-94",
"ProductNDC": "50804-147",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Goodsense Fiber Laxative 147",
"NonProprietaryName": "Calcium Polycarbophil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250109",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M007",
"LabelerName": "GoodSense",
"SubstanceName": "CALCIUM POLYCARBOPHIL",
"StrengthNumber": "625",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-01-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250109",
"SamplePackage": "N",
"IndicationAndUsage": "relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours."
},
{
"NDCCode": "54868-4811-0",
"PackageDescription": "4 POUCH in 1 CARTON (54868-4811-0) > 1 PATCH in 1 POUCH > 24 [USP'U] in 1 PATCH",
"NDC11Code": "54868-4811-00",
"ProductNDC": "54868-4811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20030614",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": ".97",
"StrengthUnit": "mg/48[USP'U]",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.",
"Description": "Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
},
{
"NDCCode": "54868-4813-0",
"PackageDescription": "4 POUCH in 1 CARTON (54868-4813-0) > 1 PATCH in 1 POUCH > 24 [USP'U] in 1 PATCH",
"NDC11Code": "54868-4813-00",
"ProductNDC": "54868-4813",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Estradiol",
"NonProprietaryName": "Estradiol",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20030609",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075182",
"LabelerName": "Physicians Total Care, Inc.",
"SubstanceName": "ESTRADIOL",
"StrengthNumber": "1.46",
"StrengthUnit": "mg/48[USP'U]",
"Pharm_Classes": "Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-07-24",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.",
"Description": "Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>61314-625-94</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61314-625-94) / .05 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61314-0625-94</NDC11Code>
<ProductNDC>61314-625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cimerli</ProprietaryName>
<NonProprietaryName>Ranibizumab-eqrn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>20241212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761165</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>RANIBIZUMAB</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/.05mL</StrengthUnit>
<Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CIMERLI is indicated for the treatment of patients with.</IndicationAndUsage>
<Description>Ranibizumab-eqrn is a recombinant humanized IgG1 kappa isotype monoclonal antibody fragment designed for intraocular use. Ranibizumab-eqrn binds to and inhibits the biologic activity of human vascular endothelial growth factor A (VEGF-A). Ranibizumab-eqrn, which lacks an Fc region, has a molecular weight of approximately 48 kilodaltons and is produced by an E. coli expression system. CIMERLI (ranibizumab-eqrn) injection is a sterile, colorless to pale yellow solution in a single-dose glass vial for intravitreal injection. CIMERLI is supplied as a preservative-free, sterile solution in a single-dose container designed to deliver 0.05 mL of 10 mg/mL ranibizumab-eqrn (0.5 mg dose vial) or 6 mg/mL ranibizumab-eqrn (0.3 mg dose vial) aqueous solution with 10 mM histidine HCl, 10% α,α trehalose dihydrate, 0.01% polysorbate 20, pH 5.5.</Description>
</NDC>
<NDC>
<NDCCode>49035-625-94</NDCCode>
<PackageDescription>118 mL in 1 CONTAINER (49035-625-94) </PackageDescription>
<NDC11Code>49035-0625-94</NDC11Code>
<ProductNDC>49035-625</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Equate Itch Relief Gel</ProprietaryName>
<NonProprietaryName>Itch Relief Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181220</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Walmart, Inc</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily relieves pain due to: Minor burns, insect bites, sunburn, minor skin irritation, minor cuts, scrapes, rashes due to poison ivy, poison oak and poison sumac.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68462-625-94</NDCCode>
<PackageDescription>100 g in 1 CAN (68462-625-94) </PackageDescription>
<NDC11Code>68462-0625-94</NDC11Code>
<ProductNDC>68462-625</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clobetasol Propionate</ProprietaryName>
<NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
<DosageFormName>AEROSOL, FOAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20190909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211450</ApplicationNumber>
<LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
<SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clobetasol propionate emulsion foam is indicated for the treatment of inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses in patients 12 years and older.</IndicationAndUsage>
<Description>Clobetasol Propionate Emulsion Foam, 0.05% is a white to off-white emulsion aerosol foam containing the active ingredient clobetasol propionate, USP, a synthetic corticosteroid for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Clobetasol propionate, USP is 21-chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, with the empirical formula C25H32ClFO5, and a molecular weight of 467 g/mol. The following is the chemical structure. Clobetasol Propionate, USP. Clobetasol propionate, USP is a white to almost white crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Each gram of Clobetasol Propionate Emulsion Foam, 0.05% contains 0.5 mg clobetasol propionate, USP. The foam also contains anhydrous citric acid, cetyl alcohol, cyclomethicone, isopropyl myristate, light mineral oil, polyoxyl-20 cetostearyl ether, potassium citrate, propylene glycol, purified water, sorbitan monolaurate, white petrolatum, and phenoxyethanol as a preservative. Clobetasol Propionate Emulsion Foam is dispensed from an aluminum can pressurized with a hydrocarbon (propane/butane) propellant.</Description>
</NDC>
<NDC>
<NDCCode>61314-228-94</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61314-228-94) / 1.7 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61314-0228-94</NDC11Code>
<ProductNDC>61314-228</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Wyost</ProprietaryName>
<NonProprietaryName>Denosumab</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250602</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761362</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>DENOSUMAB</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1.7mL</StrengthUnit>
<Pharm_Classes>RANK Ligand Blocking Activity [MoA], RANK Ligand Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Wyost is a RANK ligand (RANKL) inhibitor indicated for: 1 Prevention of skeletal-related events in patients with multiple myeloma and in patients with bone metastases from solid tumors. (1.1), 2 Treatment of adults and skeletally mature adolescents with giant cell tumor of bone that is unresectable or where surgical resection is likely to result in severe morbidity. (1.2, 14.3), 3 Treatment of hypercalcemia of malignancy refractory to bisphosphonate therapy. (1.3).</IndicationAndUsage>
<Description>Denosumab-bbdz is a human IgG2 monoclonal antibody that binds to human RANKL. Denosumab-bbdz has an approximate molecular weight of 147 kDa and is produced in genetically engineered mammalian (Chinese hamster ovary) cells. Wyost (denosumab-bbdz) injection is a sterile, preservative-free, clear to slightly opalescent and colorless to slightly yellowish to slightly brownish solution for subcutaneous use. Each single-dose vial contains 1.7 mL solution of 120 mg denosumab-bbdz, glacial acetic acid (1.85 mg), polysorbate 20 (0.17 mg), sodium hydroxide (0.91 mg), sorbitol (78.9 mg), and Water for Injection (USP). Hydrochloric acid and sodium hydroxide may be added to adjust the pH to 5.2.</Description>
</NDC>
<NDC>
<NDCCode>61314-531-64</NDCCode>
<PackageDescription>2 KIT in 1 CARTON (61314-531-64) / 1 KIT in 1 KIT * 1 SYRINGE, GLASS in 1 CARTON (61314-454-94) / .8 mL in 1 SYRINGE, GLASS * 1 SYRINGE, GLASS in 1 CARTON (61314-473-94) / .4 mL in 1 SYRINGE, GLASS</PackageDescription>
<NDC11Code>61314-0531-64</NDC11Code>
<ProductNDC>61314-531</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hyrimoz</ProprietaryName>
<NonProprietaryName>Adalimumab-adaz</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20230701</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761071</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230701</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Adalimumab-adaz is a tumor necrosis factor blocker. Adalimumab-adaz is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-adaz is produced by recombinant DNA technology in a Chinese hamster ovary cell expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. HYRIMOZ (adalimumab-adaz) injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (Sensoready Pen) as a single-dose, prefilled 1 mL glass syringe with needle guard and add-on finger flange or as a single-dose, prefilled 1 mL glass syringe. Enclosed within the Pen is a single-dose, 1 mL prefilled glass syringe. The solution of HYRIMOZ is clear, colorless or slightly yellowish, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of HYRIMOZ contains adalimumab-adaz (80 mg), adipic acid (1.75 mg), mannitol (33.6 mg), polysorbate 80 (0.32 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of HYRIMOZ contains adalimumab-adaz (40 mg), adipic acid (0.88 mg), mannitol (16.8 mg), polysorbate 80 (0.16 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 40 mg/0.8 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.8 mL (40 mg) of drug product. Each 0.8 mL of HYRIMOZ contains adalimumab-adaz (40 mg), adipic acid (2.69 mg), citric acid monohydrate (0.206 mg), mannitol (9.6 mg), polysorbate 80 (0.8 mg), sodium chloride (4.93 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 20 mg/0.4 mL prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.4 mL (20 mg) of drug product. Each 0.4 mL of HYRIMOZ contains adalimumab-adaz (20 mg), adipic acid (1.34 mg), citric acid monohydrate (0.103 mg), mannitol (4.8 mg), polysorbate 80 (0.4 mg), sodium chloride (2.46 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of HYRIMOZ contains adalimumab-adaz (20 mg), adipic acid (0.44 mg), mannitol (8.4 mg), polysorbate 80 (0.08 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 10 mg/0.1 mL prefilled syringe delivers 0.1 mL (10 mg) of drug product. Each 0.1 mL of HYRIMOZ contains adalimumab-adaz (10 mg), adipic acid (0.22 mg), mannitol (4.2 mg), polysorbate 80 (0.04 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>61314-543-94</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61314-543-94) / 15 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61314-0543-94</NDC11Code>
<ProductNDC>61314-543</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tyruko</ProprietaryName>
<NonProprietaryName>Natalizumab-sztn</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251117</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761322</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>NATALIZUMAB</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Integrin Receptor Antagonist [EPC], Integrin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251117</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TYRUKO is an integrin receptor antagonist indicated for treatment of:. Multiple Sclerosis (MS). TYRUKO is indicated as monotherapy for the treatment of relapsing forms of multiple sclerosis, to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in adults. Natalizumab products increase the risk of PML [see Warnings and Precautions (5.1)]. When initiating and continuing treatment with TYRUKO, physicians should consider whether the expected benefit of TYRUKO is sufficient to offset this risk. (1.1). Crohn's Disease (CD): 1 TYRUKO is indicated for inducing and maintaining clinical response and remission in adult patients with moderately to severely active Crohn's disease with evidence of inflammation who have had an inadequate response to, or are unable to tolerate, conventional CD therapies and inhibitors of TNF-α. (1.2) .</IndicationAndUsage>
<Description>Natalizumab-sztn is a recombinant humanized IgG4ĸ monoclonal antibody produced in a Chinese hamster ovary (CHO) mammalian cell expression system. Natalizumab-sztn contains human framework regions and the complementarity-determining regions of an antibody that binds to α4-integrin. The molecular weight of natalizumab-sztn is 149 kilodaltons. TYRUKO (natalizumab-sztn) injection is supplied as a sterile, preservative-free, colorless, and clear to slightly opalescent solution for intravenous infusion. Each 15 mL of solution contains 300 mg natalizumab-sztn; histidine (6.36 mg); L-histidine hydrochloride monohydrate (22.86 mg); polysorbate 80, USP/NF (3 mg); sodium chloride, USP (131.49 mg); and Water for Injection, USP at pH 5.7.</Description>
</NDC>
<NDC>
<NDCCode>61314-624-94</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61314-624-94) / .05 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61314-0624-94</NDC11Code>
<ProductNDC>61314-624</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cimerli</ProprietaryName>
<NonProprietaryName>Ranibizumab-eqrn</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVITREAL</RouteName>
<StartMarketingDate>20241212</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761165</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>RANIBIZUMAB</SubstanceName>
<StrengthNumber>.3</StrengthNumber>
<StrengthUnit>mg/.05mL</StrengthUnit>
<Pharm_Classes>Vascular Endothelial Growth Factor Inhibitor [EPC], Vascular Endothelial Growth Factor Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CIMERLI is indicated for the treatment of patients with.</IndicationAndUsage>
<Description>Ranibizumab-eqrn is a recombinant humanized IgG1 kappa isotype monoclonal antibody fragment designed for intraocular use. Ranibizumab-eqrn binds to and inhibits the biologic activity of human vascular endothelial growth factor A (VEGF-A). Ranibizumab-eqrn, which lacks an Fc region, has a molecular weight of approximately 48 kilodaltons and is produced by an E. coli expression system. CIMERLI (ranibizumab-eqrn) injection is a sterile, colorless to pale yellow solution in a single-dose glass vial for intravitreal injection. CIMERLI is supplied as a preservative-free, sterile solution in a single-dose container designed to deliver 0.05 mL of 10 mg/mL ranibizumab-eqrn (0.5 mg dose vial) or 6 mg/mL ranibizumab-eqrn (0.3 mg dose vial) aqueous solution with 10 mM histidine HCl, 10% α,α trehalose dihydrate, 0.01% polysorbate 20, pH 5.5.</Description>
</NDC>
<NDC>
<NDCCode>61314-651-94</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (61314-651-94) / .5 mL in 1 VIAL</PackageDescription>
<NDC11Code>61314-0651-94</NDC11Code>
<ProductNDC>61314-651</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pyzchiva</ProprietaryName>
<NonProprietaryName>Ustekinumab-ttwe</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20250222</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761373</ApplicationNumber>
<LabelerName>SANDOZ INC</LabelerName>
<SubstanceName>USTEKINUMAB</SubstanceName>
<StrengthNumber>45</StrengthNumber>
<StrengthUnit>mg/.5mL</StrengthUnit>
<Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250623</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PYZCHIVA is a human interleukin-12 and -23 antagonist indicated for the treatment of:Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn's disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).</IndicationAndUsage>
<Description>Ustekinumab-ttwe, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-ttwe is produced in a Chinese hamster ovary cell line. The manufacturing process contains steps for the clearance of viruses. Ustekinumab-ttwe is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. PYZCHIVA (ustekinumab-ttwe) injection is a clear, colorless to light yellow, sterile and preservative-free solution with pH of 5.7– 6.3. PYZCHIVA for Subcutaneous Use. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29 gauge fixed ½ inch needle and as 45 mg of ustekinumab-ttwe in 0.5 mL in a single-dose Type I glass vial with a coated stopper. The syringe is fitted with a passive needle guard and a needle cover. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled autoinjector. Each 0.5 mL prefilled syringe, prefilled PYZCHIVA AUTOINJECTOR or vial delivers 45 mg ustekinumab-ttwe, histidine (0.095 mg), histidine hydrochloride monohydrate (0.405 mg), polysorbate 80 (0.02 mg), and sucrose (42.5 mg). Each 1 mL prefilled syringe or prefilled PYZCHIVA AUTOINJECTOR delivers 90 mg ustekinumab-ttwe, histidine (0.19 mg), histidine hydrochloride monohydrate (0.81 mg), polysorbate 80 (0.04 mg), and sucrose (85 mg). PYZCHIVA for Intravenous Infusion. Available as 130 mg of ustekinumab-ttwe in 26 mL, supplied as a single-dose Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-ttwe, edetate disodium (0.52 mg), histidine (20 mg), histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg) and sucrose (2,210 mg).</Description>
</NDC>
<NDC>
<NDCCode>61314-654-94</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (61314-654-94) / 26 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>61314-0654-94</NDC11Code>
<ProductNDC>61314-654</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pyzchiva</ProprietaryName>
<NonProprietaryName>Ustekinumab-ttwe</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250222</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761425</ApplicationNumber>
<LabelerName>SANDOZ INC</LabelerName>
<SubstanceName>USTEKINUMAB</SubstanceName>
<StrengthNumber>130</StrengthNumber>
<StrengthUnit>mg/26mL</StrengthUnit>
<Pharm_Classes>Interleukin-12 Antagonist [EPC], Interleukin-12 Antagonists [MoA], Interleukin-23 Antagonist [EPC], Interleukin-23 Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>PYZCHIVA is a human interleukin-12 and -23 antagonist indicated for the treatment of:Adult patients with: 1 moderate to severe plaque psoriasis (PsO) who are candidates for phototherapy or systemic therapy. (1.1), 2 active psoriatic arthritis (PsA). (1.2), 3 moderately to severely active Crohn's disease (CD). (1.3), 4 moderately to severely active ulcerative colitis. (1.4).</IndicationAndUsage>
<Description>Ustekinumab-ttwe, a human IgG1κ monoclonal antibody, is a human interleukin-12 and -23 antagonist. Using DNA recombinant technology, ustekinumab-ttwe is produced in a Chinese hamster ovary cell line. The manufacturing process contains steps for the clearance of viruses. Ustekinumab-ttwe is comprised of 1326 amino acids and has an estimated molecular mass that ranges from 148,079 to 149,690 Daltons. PYZCHIVA (ustekinumab-ttwe) injection is a clear, colorless to light yellow, sterile and preservative-free solution with pH of 5.7– 6.3. PYZCHIVA for Subcutaneous Use. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled syringe with a 29 gauge fixed ½ inch needle and as 45 mg of ustekinumab-ttwe in 0.5 mL in a single-dose Type I glass vial with a coated stopper. The syringe is fitted with a passive needle guard and a needle cover. Available as 45 mg of ustekinumab-ttwe in 0.5 mL and 90 mg of ustekinumab-ttwe in 1 mL, supplied as a sterile solution in a single-dose prefilled autoinjector. Each 0.5 mL prefilled syringe, prefilled PYZCHIVA AUTOINJECTOR or vial delivers 45 mg ustekinumab-ttwe, histidine (0.095 mg), histidine hydrochloride monohydrate (0.405 mg), polysorbate 80 (0.02 mg), and sucrose (42.5 mg). Each 1 mL prefilled syringe or prefilled PYZCHIVA AUTOINJECTOR delivers 90 mg ustekinumab-ttwe, histidine (0.19 mg), histidine hydrochloride monohydrate (0.81 mg), polysorbate 80 (0.04 mg), and sucrose (85 mg). PYZCHIVA for Intravenous Infusion. Available as 130 mg of ustekinumab-ttwe in 26 mL, supplied as a single-dose Type I glass vial with a coated stopper. Each 26 mL vial delivers 130 mg ustekinumab-ttwe, edetate disodium (0.52 mg), histidine (20 mg), histidine hydrochloride monohydrate (27 mg), methionine (10.4 mg), polysorbate 80 (10.4 mg) and sucrose (2,210 mg).</Description>
</NDC>
<NDC>
<NDCCode>0378-3349-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3349-99) / 1 PATCH in 1 POUCH (0378-3349-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3349-99</NDC11Code>
<ProductNDC>0378-3349</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3350-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3350-99) / 1 PATCH in 1 POUCH (0378-3350-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3350-99</NDC11Code>
<ProductNDC>0378-3350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3351-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3351-99) / 1 PATCH in 1 POUCH (0378-3351-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3351-99</NDC11Code>
<ProductNDC>0378-3351</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050407</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3352-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3352-99) / 1 PATCH in 1 POUCH (0378-3352-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3352-99</NDC11Code>
<ProductNDC>0378-3352</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3360-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3360-99) / 1 PATCH in 1 POUCH (0378-3360-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3360-99</NDC11Code>
<ProductNDC>0378-3360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>0378-3361-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-3361-99) / 1 PATCH in 1 POUCH (0378-3361-16) / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-3361-99</NDC11Code>
<ProductNDC>0378-3361</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.06</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060809</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>21130-147-94</NDCCode>
<PackageDescription>140 TABLET in 1 BOTTLE (21130-147-94)</PackageDescription>
<NDC11Code>21130-0147-94</NDC11Code>
<ProductNDC>21130-147</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fiber Laxative</ProprietaryName>
<NonProprietaryName>Calcium Polycarbophil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150505</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part334</ApplicationNumber>
<LabelerName>Safeway</LabelerName>
<SubstanceName>CALCIUM POLYCARBOPHIL</SubstanceName>
<StrengthNumber>625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>24338-001-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (24338-001-30) </PackageDescription>
<NDC11Code>24338-0001-30</NDC11Code>
<ProductNDC>24338-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Widaplik</ProprietaryName>
<NonProprietaryName>Telmisartan, Amlodipine And Indapamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219423</ApplicationNumber>
<LabelerName>Azurity Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE</SubstanceName>
<StrengthNumber>10; 1.25; .625</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.</IndicationAndUsage>
<Description>Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide.</Description>
</NDC>
<NDC>
<NDCCode>24338-002-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (24338-002-30) </PackageDescription>
<NDC11Code>24338-0002-30</NDC11Code>
<ProductNDC>24338-002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Widaplik</ProprietaryName>
<NonProprietaryName>Telmisartan, Amlodipine And Indapamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219423</ApplicationNumber>
<LabelerName>Azurity Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE</SubstanceName>
<StrengthNumber>20; 2.5; 1.25</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.</IndicationAndUsage>
<Description>Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide.</Description>
</NDC>
<NDC>
<NDCCode>24338-003-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (24338-003-30) </PackageDescription>
<NDC11Code>24338-0003-30</NDC11Code>
<ProductNDC>24338-003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Widaplik</ProprietaryName>
<NonProprietaryName>Telmisartan, Amlodipine And Indapamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA219423</ApplicationNumber>
<LabelerName>Azurity Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>TELMISARTAN; AMLODIPINE BESYLATE; INDAPAMIDE</SubstanceName>
<StrengthNumber>40; 5; 2.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Widaplik (telmisartan/amlodipine/indapamide) is indicated for the treatment of hypertension in adult patients, to lower blood pressure. Widaplik may be used as initial therapy in patients likely to need multiple drugs to achieve blood pressure goals. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including angiotensin II receptor blockers, dihydropyridine calcium channel blockers and thiazide-like diuretics. There are no controlled trials demonstrating risk reduction with Widaplik. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Patients with moderate or severe hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. Consider the patient's baseline blood pressure, the target goal, and the incremental likelihood of achieving the goal with a triple combination product compared with mono- or dual therapy when deciding whether to use Widaplik as initial therapy. Individual blood pressure goals may vary based upon the patient’s risk.</IndicationAndUsage>
<Description>Widaplik is a fixed dose combination of telmisartan, amlodipine and indapamide. Widaplik contains telmisartan, a non-peptide angiotensin II receptor (type AT1) antagonist. Telmisartan is chemically described as 4'-[(1,4'-dimethyl-2'-propyl [2,6'-bi-1H-benzimidazol]-1'-yl)methyl]-[1,1'-biphenyl]-2-carboxylic acid. Its empirical formula is C33H30N4O2, its molecular weight is 514.63, and the structural formula is:. Telmisartan is a white to slightly yellowish solid. It is practically insoluble in water, slightly soluble in methanol and soluble in strong base. Widaplik contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker. Amlodipine besylate is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-1,4-dihydro-6-methyl-3,5-pyridinedicarboxylate, monobenzenesulfonate. Its empirical formula is C20H25ClN2O5C6H6O3S, its molecular weight is 567.1, and the structural formula is:. Amlodipine besylate is a white crystalline powder. It is slightly soluble in water and sparingly soluble in ethanol. Widaplik contains indapamide, a thiazide-like diuretic. Indapamide is chemically described as 4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoylbenzamide. Its empirical formula is C16H16ClN3O3S, its molecular weight is 365.84, and the structural formula is:. Indapamide is a white to off-white, crystalline powder. It is soluble in ethyl alcohol and practically insoluble in water. Widaplik tablets are formulated in 3 strengths for oral administration: 1 10 mg/1.25 mg/0.625 mg: combination of 10 mg telmisartan, with 1.25 mg amlodipine (equivalent to 1.73 mg amlodipine besylate), with 0.625 mg indapamide, 2 20 mg/2.5 mg/1.25 mg: combination of 20 mg telmisartan, with 2.5 mg amlodipine (equivalent to 3.47 mg amlodipine besylate), with 1.25 mg indapamide, 3 40 mg/5 mg/2.5 mg: combination of 40 mg telmisartan, with 5 mg amlodipine (equivalent to 6.94 mg amlodipine besylate), with 2.5 mg of indapamide.</Description>
</NDC>
<NDC>
<NDCCode>41163-147-94</NDCCode>
<PackageDescription>140 TABLET in 1 BOTTLE (41163-147-94) </PackageDescription>
<NDC11Code>41163-0147-94</NDC11Code>
<ProductNDC>41163-147</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fiber Laxative</ProprietaryName>
<NonProprietaryName>Calcium Polycarbophil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180824</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>UNITED NATURAL FOODS, INC. DBA UNFI</LabelerName>
<SubstanceName>CALCIUM POLYCARBOPHIL</SubstanceName>
<StrengthNumber>625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>49035-147-94</NDCCode>
<PackageDescription>140 TABLET in 1 BOTTLE (49035-147-94) </PackageDescription>
<NDC11Code>49035-0147-94</NDC11Code>
<ProductNDC>49035-147</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fiber Therapy</ProprietaryName>
<NonProprietaryName>Calcium Polycarbophil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>Wal-Mart Stores, Inc.</LabelerName>
<SubstanceName>CALCIUM POLYCARBOPHIL</SubstanceName>
<StrengthNumber>625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50090-7611-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7611-0) / 1 PATCH in 1 POUCH / 7 d in 1 PATCH</PackageDescription>
<NDC11Code>50090-7611-00</NDC11Code>
<ProductNDC>50090-7611</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250722</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50090-7984-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7984-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-7984-00</NDC11Code>
<ProductNDC>50090-7984</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20000301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50090-7985-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7985-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-7985-00</NDC11Code>
<ProductNDC>50090-7985</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50090-7986-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7986-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-7986-00</NDC11Code>
<ProductNDC>50090-7986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20050407</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50090-7987-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7987-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-7987-00</NDC11Code>
<ProductNDC>50090-7987</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.0375</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50090-7988-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (50090-7988-0) / 1 d in 1 POUCH</PackageDescription>
<NDC11Code>50090-7988-00</NDC11Code>
<ProductNDC>50090-7988</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20060809</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>A-S Medication Solutions</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.06</StrengthNumber>
<StrengthUnit>mg/d</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260603</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Estradiol transdermal system continuous delivery (once-weekly) is indicated for.</IndicationAndUsage>
<Description>Estradiol transdermal system, USP continuous delivery (once-weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75, 11.625, 15.5, 18.6, 23.25 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025, 0.0375, 0.05, 0.06, 0.075 or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75, 11.625, 15.5, 18.6, 23.25 or 31 cm2, and contains estradiol, USP hemihydrate equivalent to 0.97, 1.46, 1.94, 2.33, 2.91 or 3.88 mg of estradiol, respectively. The composition of the systems per unit area is identical. Estradiol, USP hemihydrate is a white, crystalline powder, chemically described as Estra-1,3,5(10)-triene-3,17β-diol-hemihydrate. It has a molecular formula of C18 H24O2 ½ H2O and molecular weight of 281.39. The structural formula is. Meets USP Drug Release Test 2. The estradiol transdermal system continuous delivery (once-weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are. (1) A foam backing with adhesive layer. (2) A polyester film. (3) An acrylate adhesive matrix containing estradiol. (4) A protective liner of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the transdermal system is estradiol. The remaining components of the transdermal system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>50804-147-94</NDCCode>
<PackageDescription>140 TABLET in 1 BOTTLE (50804-147-94) </PackageDescription>
<NDC11Code>50804-0147-94</NDC11Code>
<ProductNDC>50804-147</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Goodsense Fiber Laxative 147</ProprietaryName>
<NonProprietaryName>Calcium Polycarbophil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250109</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M007</ApplicationNumber>
<LabelerName>GoodSense</LabelerName>
<SubstanceName>CALCIUM POLYCARBOPHIL</SubstanceName>
<StrengthNumber>625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250109</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves occasional constipation. this product generally produces bowel movement in 12 to 72 hours.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>54868-4811-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (54868-4811-0) > 1 PATCH in 1 POUCH > 24 [USP'U] in 1 PATCH</PackageDescription>
<NDC11Code>54868-4811-00</NDC11Code>
<ProductNDC>54868-4811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20030614</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>.97</StrengthNumber>
<StrengthUnit>mg/48[USP'U]</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.</IndicationAndUsage>
<Description>Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
<NDC>
<NDCCode>54868-4813-0</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (54868-4813-0) > 1 PATCH in 1 POUCH > 24 [USP'U] in 1 PATCH</PackageDescription>
<NDC11Code>54868-4813-00</NDC11Code>
<ProductNDC>54868-4813</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Estradiol</ProprietaryName>
<NonProprietaryName>Estradiol</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20030609</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075182</ApplicationNumber>
<LabelerName>Physicians Total Care, Inc.</LabelerName>
<SubstanceName>ESTRADIOL</SubstanceName>
<StrengthNumber>1.46</StrengthNumber>
<StrengthUnit>mg/48[USP'U]</StrengthUnit>
<Pharm_Classes>Estradiol Congeners [Chemical/Ingredient],Estrogen [EPC],Estrogen Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-07-24</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Estradiol Transdermal System Continuous Delivery (Once-Weekly), USP is indicated in the: 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Prevention of postmenopausal osteoporosis. When prescribing solely for the prevention of postmenopausal osteoporosis, therapy should only be considered for women at significant risk of osteoporosis and non-estrogen medications should be carefully considered.The mainstays for decreasing the risk of postmenopausal osteoporosis are weight bearing exercise, adequate calcium and vitamin D intake, and when indicated, pharmacologic therapy. Postmenopausal women require an average of 1500 mg/day of elemental calcium. Therefore, when not contraindicated, calcium supplementation may be helpful for women with suboptimal dietary intake. Vitamin D supplementation of 400 IU/day to 800 IU/day may also be required to ensure adequate daily intake in postmenopausal women.</IndicationAndUsage>
<Description>Estradiol Transdermal System Continuous Delivery (Once-Weekly) is designed to release estradiol continuously upon application to intact skin. Six (7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 and 31 cm2) systems are available to provide nominal in vivo delivery of 0.025 mg, 0.0375 mg, 0.05 mg, 0.06 mg, 0.075 mg or 0.1 mg respectively of estradiol per day. The period of use is 7 days. Each system has a contact surface area of either 7.75 cm2, 11.625 cm2, 15.5 cm2, 18.6 cm2, 23.25 cm2 or 31 cm2, and contains 0.97 mg, 1.46 mg, 1.94 mg, 2.33 mg, 2.91 mg or 3.88 mg of estradiol USP respectively. The composition of the systems per unit area is identical. Estradiol USP is a white, crystalline powder, chemically described as estra-1,3,5(10)-triene-3,17ß-diol. It has a molecular formula of C18H2402 and molecular weight of 272.39. The structural formula is. The Estradiol Transdermal System Continuous Delivery (Once-Weekly) comprises four layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are (1) a foam backing with adhesive layer, (2) a polyester film, and (3) an acrylate adhesive matrix containing estradiol USP. A protective liner (4) of siliconized polyester film is attached to the adhesive surface and must be removed before the system can be used. The active component of the system is estradiol. The remaining components of the system (propylene glycol, povidone, anhydrous colloidal silicon dioxide, pressure sensitive acrylic adhesive, copolymer foam, polyester film, and brown ink) are pharmacologically inactive.</Description>
</NDC>
</NDCList>