{
"NDC": [
{
"NDCCode": "61703-326-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-326-18) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0326-18",
"ProductNDC": "61703-326",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pamidronate Disodium",
"NonProprietaryName": "Pamidronate Disodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075841",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PAMIDRONATE DISODIUM",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051001",
"SamplePackage": "N",
"IndicationAndUsage": "Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).",
"Description": "Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP."
},
{
"NDCCode": "47335-326-18",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (47335-326-18) ",
"NDC11Code": "47335-0326-18",
"ProductNDC": "47335-326",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naltrexone Hydrochloride",
"NonProprietaryName": "Naltrexone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120229",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090356",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Antagonist [EPC], Opioid Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120229",
"SamplePackage": "N",
"IndicationAndUsage": "Naltrexone hydrochloride tablets are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone hydrochloride has not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.",
"Description": "Naltrexone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone hydrochloride differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5⛙)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone hydrochloride is available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride, USP. Naltrexone hydrochloride tablets, USP also contain: colloidal silicon dioxide, crospovidone, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide."
},
{
"NDCCode": "80708-326-18",
"PackageDescription": "4000 mL in 1 JUG (80708-326-18) ",
"NDC11Code": "80708-0326-18",
"ProductNDC": "80708-326",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rosemary Yuzu Sanitizer",
"NonProprietaryName": "Ethyl Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20201116",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Cleanli Brands LLC",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2022-03-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20201116",
"SamplePackage": "N"
},
{
"NDCCode": "61703-324-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-324-18) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0324-18",
"ProductNDC": "61703-324",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pamidronate Disodium",
"NonProprietaryName": "Pamidronate Disodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051001",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075841",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PAMIDRONATE DISODIUM",
"StrengthNumber": "3",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051001",
"SamplePackage": "N",
"IndicationAndUsage": "Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).",
"Description": "Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP."
},
{
"NDCCode": "61703-325-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-325-18) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0325-18",
"ProductNDC": "61703-325",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pamidronate Disodium",
"NonProprietaryName": "Pamidronate Disodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20030728",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075841",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "PAMIDRONATE DISODIUM",
"StrengthNumber": "6",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Bisphosphonate [EPC], Diphosphonates [CS]",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20030728",
"SamplePackage": "N",
"IndicationAndUsage": "Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).",
"Description": "Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP."
},
{
"NDCCode": "61703-332-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-332-18) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0332-18",
"ProductNDC": "61703-332",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bleomycin",
"NonProprietaryName": "Bleomycin",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20000411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065031",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "BLEOMYCIN SULFATE",
"StrengthNumber": "15",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000411",
"SamplePackage": "N",
"IndicationAndUsage": "Bleomycin for Injection should be considered a palliative treatment. It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents. Squamous Cell Carcinoma. Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva. The response to bleomycin is poorer in patients with previously irradiated head and neck cancer. Lymphomas. Hodgkin's disease, non-Hodgkin's lymphoma. Testicular Carcinoma. Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin has also been shown to be useful in the management of:. Malignant Pleural Effusion. Bleomycin is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.",
"Description": "Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus. It is freely soluble in water. It is available as a lyophilized powder for intramuscular, intravenous or subcutaneous injection. Each vial contains sterile bleomycin sulphate equivalent to 15 units or 30 units of bleomycin. Sulfuric acid or Sodium hydroxide used, if necessary to adjust the pH. Bleomycins are a group of related basic glycopeptides which differ in the terminal amine substituent of the common structural unit, bleomycin acid. The main components of Bleomycin for Injection are bleomycins A2 and B2. Chemically, bleomycin A2 is N1-[3-(dimethylsulfonio)propyl]-bleomycinamide and bleomycin B2 is N1-[4-(aminoiminomethyl)amino]butyl]-bleomycinamide. The molecular formula of bleomycin A2 is C55H84N17O21S3 and a calculated molecular weight of 1414. The molecular formula of bleomycin B2 is C55H84N20O21S2 and a calculated molecular weight of 1425. The structural formula of bleomycins A2 and B2 are shown below. Note: A unit of bleomycin is equal to the formerly used milligram activity. The term milligram activity is a misnomer and was changed to units to be more precise."
},
{
"NDCCode": "61703-339-18",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-339-18) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0339-18",
"ProductNDC": "61703-339",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20041014",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076517",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041014",
"SamplePackage": "N",
"IndicationAndUsage": "Carboplatin Injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of Carboplatin Injection and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor <2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup.",
"Description": "Carboplatin Injection is supplied as a sterile, pyrogen-free, aqueous solution available in 50 mg/5 mL, 150 mg/15 mL, 450 mg/45 mL or 600 mg/60 mL multiple-dose vials containing 10 mg/mL of carboplatin for administration by intravenous infusion. Each mL contains 10 mg carboplatin and Water for Injection, USP. Carboplatin is a platinum coordination compound. The chemical name for carboplatin is platinum, diammine [1,1-cyclobutane-dicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin has the following structural formula. Carboplatin is a crystalline powder with the molecular formula of C6H12N204Pt and a molecular weight of 371.25. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide."
},
{
"NDCCode": "61703-343-18",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-18) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0343-18",
"ProductNDC": "61703-343",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitoxantrone",
"NonProprietaryName": "Mitoxantrone",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076871",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MITOXANTRONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060411",
"SamplePackage": "N",
"IndicationAndUsage": "Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.",
"Description": "Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is."
},
{
"NDCCode": "61703-344-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-344-18) > 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0344-18",
"ProductNDC": "61703-344",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fludarabine Phosphate",
"NonProprietaryName": "Fludarabine Phosphate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20080925",
"EndMarketingDate": "20210930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077790",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "FLUDARABINE PHOSPHATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20080925",
"EndMarketingDatePackage": "20210930",
"SamplePackage": "N"
},
{
"NDCCode": "61703-356-18",
"PackageDescription": "1 VIAL in 1 CARTON (61703-356-18) > 10 mL in 1 VIAL",
"NDC11Code": "61703-0356-18",
"ProductNDC": "61703-356",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pamidronate Disodium",
"NonProprietaryName": "Pamidronate Disodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110623",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075841",
"LabelerName": "Hospira Worldwide, Inc.",
"SubstanceName": "PAMIDRONATE DISODIUM",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Bisphosphonate [EPC],Diphosphonates [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2014-07-07"
},
{
"NDCCode": "61703-360-18",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-360-18) / 5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0360-18",
"ProductNDC": "61703-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboplatin",
"NonProprietaryName": "Carboplatin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220523",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076517",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "CARBOPLATIN",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Active",
"LastUpdate": "2024-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220523",
"SamplePackage": "N",
"IndicationAndUsage": "Carboplatin Injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of Carboplatin Injection and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor <2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup.",
"Description": "Carboplatin Injection is supplied as a sterile, pyrogen-free, aqueous solution available in 50 mg/5 mL, 150 mg/15 mL, 450 mg/45 mL or 600 mg/60 mL multiple-dose vials containing 10 mg/mL of carboplatin for administration by intravenous infusion. Each mL contains 10 mg carboplatin and Water for Injection, USP. Carboplatin is a platinum coordination compound. The chemical name for carboplatin is platinum, diammine [1,1-cyclobutane-dicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin has the following structural formula. Carboplatin is a crystalline powder with the molecular formula of C6H12N204Pt and a molecular weight of 371.25. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide."
},
{
"NDCCode": "61703-363-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-363-18) / 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0363-18",
"ProductNDC": "61703-363",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxaliplatin",
"NonProprietaryName": "Oxaliplatin",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078813",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "OXALIPLATIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]",
"Status": "Active",
"LastUpdate": "2026-08-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090810",
"SamplePackage": "N",
"IndicationAndUsage": "Oxaliplatin, in combination with infusional fluorouracil and leucovorin, is indicated for: 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor., 2 treatment of advanced colorectal cancer.",
"Description": "Oxaliplatin Injection, USP is a platinum-based drug with the molecular formula C8H14N2O4Pt and the chemical name of cis-[(1 R,2 R)-1,2-cyclohexanediamine-N,N'] [oxalato(2-)- O,O'] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin Injection, USP, for intravenous use is supplied in vials containing 50 mg or 100 mg of oxaliplatin as a sterile, preservative-free, aqueous solution for intravenous use after dilution. Each mL contains 5 mg of Oxaliplatin with 0.03 mg Tartaric Acid, NF and 0.0123 mg Sodium Hydroxide, NF used in combination as a buffering system and Water for Injection, USP."
},
{
"NDCCode": "61703-418-18",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-418-18) > 2 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0418-18",
"ProductNDC": "61703-418",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Aquasol A",
"NonProprietaryName": "Vitamin A Palmitate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20140718",
"EndMarketingDate": "20211001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA006823",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "VITAMIN A PALMITATE",
"StrengthNumber": "15",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2021-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150128",
"EndMarketingDatePackage": "20211001",
"SamplePackage": "N"
},
{
"NDCCode": "61703-124-40",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-124-40) / 40 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0124-40",
"ProductNDC": "61703-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20221017",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221017",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "61703-161-05",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 CARTON (61703-161-05) / 2 mL in 1 VIAL, MULTI-DOSE (61703-161-02) ",
"NDC11Code": "61703-0161-05",
"ProductNDC": "61703-161",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20241104",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241104",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "61703-343-65",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-65) / 12.5 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0343-65",
"ProductNDC": "61703-343",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitoxantrone",
"NonProprietaryName": "Mitoxantrone",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076871",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MITOXANTRONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060411",
"SamplePackage": "N",
"IndicationAndUsage": "Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.",
"Description": "Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is."
},
{
"NDCCode": "61703-343-66",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-66) / 15 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "61703-0343-66",
"ProductNDC": "61703-343",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mitoxantrone",
"NonProprietaryName": "Mitoxantrone",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076871",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "MITOXANTRONE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060411",
"SamplePackage": "N",
"IndicationAndUsage": "Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.",
"Description": "Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is."
},
{
"NDCCode": "61703-350-10",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 CARTON (61703-350-10) / 2 mL in 1 VIAL, MULTI-DOSE (61703-350-09) ",
"NDC11Code": "61703-0350-10",
"ProductNDC": "61703-350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20140925",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140925",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "61703-350-38",
"PackageDescription": "5 VIAL, MULTI-DOSE in 1 CARTON (61703-350-38) / 2 mL in 1 VIAL, MULTI-DOSE (61703-350-37) ",
"NDC11Code": "61703-0350-38",
"ProductNDC": "61703-350",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20050727",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20050727",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "61703-408-25",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-408-25) / 40 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0408-25",
"ProductNDC": "61703-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20131111",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20131111",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "61703-408-41",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61703-408-41) / 40 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61703-0408-41",
"ProductNDC": "61703-408",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methotrexate",
"NonProprietaryName": "Methotrexate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20010226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA011719",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "METHOTREXATE SODIUM",
"StrengthNumber": "25",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010226",
"SamplePackage": "N",
"IndicationAndUsage": "Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).",
"Description": "Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5."
},
{
"NDCCode": "0093-5376-01",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5376-01) ",
"NDC11Code": "00093-5376-01",
"ProductNDC": "0093-5376",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200730",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5376-84",
"PackageDescription": "48 BLISTER PACK in 1 CARTON (0093-5376-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5376-19) ",
"NDC11Code": "00093-5376-84",
"ProductNDC": "0093-5376",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210901",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5377-01",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5377-01) ",
"NDC11Code": "00093-5377-01",
"ProductNDC": "0093-5377",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200730",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5377-84",
"PackageDescription": "48 BLISTER PACK in 1 CARTON (0093-5377-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5377-19) ",
"NDC11Code": "00093-5377-84",
"ProductNDC": "0093-5377",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20200730",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200730",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5416-01",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5416-01) ",
"NDC11Code": "00093-5416-01",
"ProductNDC": "0093-5416",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20180417",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180417",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5417-01",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5417-01) ",
"NDC11Code": "00093-5417-01",
"ProductNDC": "0093-5417",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170725",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5417-84",
"PackageDescription": "48 BLISTER PACK in 1 CARTON (0093-5417-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5417-19) ",
"NDC11Code": "00093-5417-84",
"ProductNDC": "0093-5417",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170725",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5419-01",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5419-01) ",
"NDC11Code": "00093-5419-01",
"ProductNDC": "0093-5419",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170725",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
},
{
"NDCCode": "0093-5419-84",
"PackageDescription": "48 BLISTER PACK in 1 CARTON (0093-5419-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5419-19) ",
"NDC11Code": "00093-5419-84",
"ProductNDC": "0093-5419",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clozapine",
"NonProprietaryName": "Clozapine",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20170725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090308",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "CLOZAPINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170725",
"SamplePackage": "N",
"IndicationAndUsage": "Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).",
"Description": "Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>61703-326-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-326-18) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0326-18</NDC11Code>
<ProductNDC>61703-326</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pamidronate Disodium</ProprietaryName>
<NonProprietaryName>Pamidronate Disodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075841</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PAMIDRONATE DISODIUM</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).</IndicationAndUsage>
<Description>Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>47335-326-18</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (47335-326-18) </PackageDescription>
<NDC11Code>47335-0326-18</NDC11Code>
<ProductNDC>47335-326</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naltrexone Hydrochloride</ProprietaryName>
<NonProprietaryName>Naltrexone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120229</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090356</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Antagonist [EPC], Opioid Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120229</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Naltrexone hydrochloride tablets are indicated in the treatment of alcohol dependence and for the blockade of the effects of exogenously administered opioids. Naltrexone hydrochloride has not been shown to provide any therapeutic benefit except as part of an appropriate plan of management for the addictions.</IndicationAndUsage>
<Description>Naltrexone hydrochloride, an opioid antagonist, is a synthetic congener of oxymorphone with no opioid agonist properties. Naltrexone hydrochloride differs in structure from oxymorphone in that the methyl group on the nitrogen atom is replaced by a cyclopropylmethyl group. Naltrexone hydrochloride is also related to the potent opioid antagonist, naloxone, or n-allylnoroxymorphone. The chemical name for naltrexone hydrochloride is Morphinan-6-one, 17-(cyclopropylmethyl)-4,5-epoxy-3,14-dihydroxy-, hydrochloride, (5⛙)-. The structural formula is as follows. Naltrexone hydrochloride is a white, crystalline compound. The hydrochloride salt is soluble in water to the extent of about 100 mg/mL. Naltrexone hydrochloride is available in scored film-coated tablets containing 50 mg of naltrexone hydrochloride, USP. Naltrexone hydrochloride tablets, USP also contain: colloidal silicon dioxide, crospovidone, hypromellose, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80 and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>80708-326-18</NDCCode>
<PackageDescription>4000 mL in 1 JUG (80708-326-18) </PackageDescription>
<NDC11Code>80708-0326-18</NDC11Code>
<ProductNDC>80708-326</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rosemary Yuzu Sanitizer</ProprietaryName>
<NonProprietaryName>Ethyl Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20201116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Cleanli Brands LLC</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61703-324-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-324-18) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0324-18</NDC11Code>
<ProductNDC>61703-324</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pamidronate Disodium</ProprietaryName>
<NonProprietaryName>Pamidronate Disodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051001</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075841</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PAMIDRONATE DISODIUM</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).</IndicationAndUsage>
<Description>Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>61703-325-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-325-18) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0325-18</NDC11Code>
<ProductNDC>61703-325</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pamidronate Disodium</ProprietaryName>
<NonProprietaryName>Pamidronate Disodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20030728</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075841</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>PAMIDRONATE DISODIUM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC], Diphosphonates [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030728</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hypercalcemia of Malignancy. Pamidronate disodium, in conjunction with adequate hydration, is indicated for the treatment of moderate or severe hypercalcemia associated with malignancy, with or without bone metastases. Patients who have either epidermoid or non-epidermoid tumors respond to treatment with pamidronate disodium. Vigorous saline hydration, an integral part of hypercalcemia therapy, should be initiated promptly and an attempt should be made to restore the urine output to about 2 L/day throughout treatment. Mild or asymptomatic hypercalcemia may be treated with conservative measures (i.e., saline hydration, with or without loop diuretics). Patients should be hydrated adequately throughout the treatment, but overhydration, especially in those patients who have cardiac failure, must be avoided. Diuretic therapy should not be employed prior to correction of hypovolemia. The safety and efficacy of pamidronate disodium in the treatment of hypercalcemia associated with hyperparathyroidism or with other non-tumor-related conditions has not been established. Paget’s Disease. Pamidronate disodium is indicated for the treatment of patients with moderate to severe Paget’s disease of bone. The effectiveness of pamidronate disodium was demonstrated primarily in patients with serum alkaline phosphatase ≥ 3 times the upper limit of normal. Pamidronate disodium therapy in patients with Paget’s disease has been effective in reducing serum alkaline phosphatase and urinary hydroxyproline levels by ≥ 50% in at least 50% of patients, and by ≥ 30% in at least 80% of patients. Pamidronate disodium therapy has also been effective in reducing these biochemical markers in patients with Paget’s disease who failed to respond, or no longer responded to other treatments. Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma. Pamidronate disodium is indicated, in conjunction with standard antineoplastic therapy, for the treatment of osteolytic bone metastases of breast cancer and osteolytic lesions of multiple myeloma. The pamidronate disodium treatment effect appeared to be smaller in the study of breast cancer patients receiving hormonal therapy than in the study of those receiving chemotherapy, however, overall evidence of clinical benefit has been demonstrated (see CLINICAL PHARMACOLOGY, Osteolytic Bone Metastases of Breast Cancer and Osteolytic Lesions of Multiple Myeloma, Clinical Trials section).</IndicationAndUsage>
<Description>Pamidronate disodium is a bisphosphonate available in 30 mg, 60 mg, or 90 mg vials for intravenous administration. The pamidronate disodium obtained by combining pamidronic acid and sodium hydroxide is provided in a sterile, ready to use solution for injection. Each mL of the 30 mg vial contains: 3 mg Pamidronate Disodium; 47 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 60 mg vial contains: 6 mg Pamidronate Disodium; 40 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. Each mL of the 90 mg vial contains: 9 mg Pamidronate Disodium; 37.5 mg Mannitol, USP; Water for Injection, USP, q.s.; Phosphoric Acid and/or Sodium Hydroxide, as necessary to adjust pH. The pH of a 1% solution of pamidronate disodium in distilled water is approximately 8.3. Pamidronate, a member of the group of chemical compounds known as bisphosphonates, is an analog of pyrophosphate. Pamidronate disodium is designated chemically as phosphonic acid (3-amino-1-hydroxypropylidene) bis-, disodium salt, and its structural formula is. Pamidronate disodium is soluble in water and in 2N sodium hydroxide, sparingly soluble in 0.1N hydrochloric acid and in 0.1N acetic acid, and practically insoluble in organic solvents. Its molecular formula is C3H9NO7P2Na2 and its molecular weight is 279.1 (calculated as the anhydrous form). Inactive Ingredients. Mannitol, USP, Phosphoric Acid and/or Sodium Hydroxide, as necessary (for adjustment to pH range of 6.0 - 7.0) and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>61703-332-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-332-18) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0332-18</NDC11Code>
<ProductNDC>61703-332</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bleomycin</ProprietaryName>
<NonProprietaryName>Bleomycin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20000411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065031</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>BLEOMYCIN SULFATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bleomycin for Injection should be considered a palliative treatment. It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents. Squamous Cell Carcinoma. Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva. The response to bleomycin is poorer in patients with previously irradiated head and neck cancer. Lymphomas. Hodgkin's disease, non-Hodgkin's lymphoma. Testicular Carcinoma. Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin has also been shown to be useful in the management of:. Malignant Pleural Effusion. Bleomycin is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.</IndicationAndUsage>
<Description>Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus. It is freely soluble in water. It is available as a lyophilized powder for intramuscular, intravenous or subcutaneous injection. Each vial contains sterile bleomycin sulphate equivalent to 15 units or 30 units of bleomycin. Sulfuric acid or Sodium hydroxide used, if necessary to adjust the pH. Bleomycins are a group of related basic glycopeptides which differ in the terminal amine substituent of the common structural unit, bleomycin acid. The main components of Bleomycin for Injection are bleomycins A2 and B2. Chemically, bleomycin A2 is N1-[3-(dimethylsulfonio)propyl]-bleomycinamide and bleomycin B2 is N1-[4-(aminoiminomethyl)amino]butyl]-bleomycinamide. The molecular formula of bleomycin A2 is C55H84N17O21S3 and a calculated molecular weight of 1414. The molecular formula of bleomycin B2 is C55H84N20O21S2 and a calculated molecular weight of 1425. The structural formula of bleomycins A2 and B2 are shown below. Note: A unit of bleomycin is equal to the formerly used milligram activity. The term milligram activity is a misnomer and was changed to units to be more precise.</Description>
</NDC>
<NDC>
<NDCCode>61703-339-18</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-339-18) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0339-18</NDC11Code>
<ProductNDC>61703-339</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20041014</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076517</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboplatin Injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of Carboplatin Injection and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor <2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup.</IndicationAndUsage>
<Description>Carboplatin Injection is supplied as a sterile, pyrogen-free, aqueous solution available in 50 mg/5 mL, 150 mg/15 mL, 450 mg/45 mL or 600 mg/60 mL multiple-dose vials containing 10 mg/mL of carboplatin for administration by intravenous infusion. Each mL contains 10 mg carboplatin and Water for Injection, USP. Carboplatin is a platinum coordination compound. The chemical name for carboplatin is platinum, diammine [1,1-cyclobutane-dicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin has the following structural formula. Carboplatin is a crystalline powder with the molecular formula of C6H12N204Pt and a molecular weight of 371.25. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
</NDC>
<NDC>
<NDCCode>61703-343-18</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-18) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0343-18</NDC11Code>
<ProductNDC>61703-343</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitoxantrone</ProprietaryName>
<NonProprietaryName>Mitoxantrone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076871</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MITOXANTRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.</IndicationAndUsage>
<Description>Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>61703-344-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-344-18) > 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0344-18</NDC11Code>
<ProductNDC>61703-344</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fludarabine Phosphate</ProprietaryName>
<NonProprietaryName>Fludarabine Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20080925</StartMarketingDate>
<EndMarketingDate>20210930</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077790</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>FLUDARABINE PHOSPHATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA],Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20080925</StartMarketingDatePackage>
<EndMarketingDatePackage>20210930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61703-356-18</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (61703-356-18) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>61703-0356-18</NDC11Code>
<ProductNDC>61703-356</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pamidronate Disodium</ProprietaryName>
<NonProprietaryName>Pamidronate Disodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110623</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075841</ApplicationNumber>
<LabelerName>Hospira Worldwide, Inc.</LabelerName>
<SubstanceName>PAMIDRONATE DISODIUM</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC],Diphosphonates [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-07-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>61703-360-18</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-360-18) / 5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0360-18</NDC11Code>
<ProductNDC>61703-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboplatin</ProprietaryName>
<NonProprietaryName>Carboplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220523</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076517</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>CARBOPLATIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220523</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboplatin Injection is indicated for the initial treatment of advanced ovarian carcinoma in established combination with other approved chemotherapeutic agents. One established combination regimen consists of Carboplatin Injection and cyclophosphamide. Two randomized controlled studies conducted by the NCIC and SWOG with carboplatin versus cisplatin, both in combination with cyclophosphamide, have demonstrated equivalent overall survival between the two groups (see CLINICAL STUDIES). There is limited statistical power to demonstrate equivalence in overall pathologic complete response rates and long-term survival (≥ 3 years) because of the small number of patients with these outcomes: the small number of patients with residual tumor <2 cm after initial surgery also limits the statistical power to demonstrate equivalence in this subgroup.</IndicationAndUsage>
<Description>Carboplatin Injection is supplied as a sterile, pyrogen-free, aqueous solution available in 50 mg/5 mL, 150 mg/15 mL, 450 mg/45 mL or 600 mg/60 mL multiple-dose vials containing 10 mg/mL of carboplatin for administration by intravenous infusion. Each mL contains 10 mg carboplatin and Water for Injection, USP. Carboplatin is a platinum coordination compound. The chemical name for carboplatin is platinum, diammine [1,1-cyclobutane-dicarboxylato(2-)-0,0']-,(SP-4-2), and carboplatin has the following structural formula. Carboplatin is a crystalline powder with the molecular formula of C6H12N204Pt and a molecular weight of 371.25. It is soluble in water at a rate of approximately 14 mg/mL, and the pH of a 1% solution is 5 to 7. It is virtually insoluble in ethanol, acetone, and dimethylacetamide.</Description>
</NDC>
<NDC>
<NDCCode>61703-363-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-363-18) / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0363-18</NDC11Code>
<ProductNDC>61703-363</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxaliplatin</ProprietaryName>
<NonProprietaryName>Oxaliplatin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078813</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>OXALIPLATIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Platinum-based Drug [EPC], Platinum-containing Compounds [EXT]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxaliplatin, in combination with infusional fluorouracil and leucovorin, is indicated for: 1 adjuvant treatment of stage III colon cancer in patients who have undergone complete resection of the primary tumor., 2 treatment of advanced colorectal cancer.</IndicationAndUsage>
<Description>Oxaliplatin Injection, USP is a platinum-based drug with the molecular formula C8H14N2O4Pt and the chemical name of cis-[(1 R,2 R)-1,2-cyclohexanediamine-N,N'] [oxalato(2-)- O,O'] platinum. Oxaliplatin is an organoplatinum complex in which the platinum atom is complexed with 1,2-diaminocyclohexane (DACH) and with an oxalate ligand as a leaving group. The molecular weight is 397.3. Oxaliplatin is slightly soluble in water at 6 mg/mL, very slightly soluble in methanol, and practically insoluble in ethanol and acetone. Oxaliplatin Injection, USP, for intravenous use is supplied in vials containing 50 mg or 100 mg of oxaliplatin as a sterile, preservative-free, aqueous solution for intravenous use after dilution. Each mL contains 5 mg of Oxaliplatin with 0.03 mg Tartaric Acid, NF and 0.0123 mg Sodium Hydroxide, NF used in combination as a buffering system and Water for Injection, USP.</Description>
</NDC>
<NDC>
<NDCCode>61703-418-18</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-418-18) > 2 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0418-18</NDC11Code>
<ProductNDC>61703-418</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Aquasol A</ProprietaryName>
<NonProprietaryName>Vitamin A Palmitate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20140718</StartMarketingDate>
<EndMarketingDate>20211001</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA006823</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>VITAMIN A PALMITATE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150128</StartMarketingDatePackage>
<EndMarketingDatePackage>20211001</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61703-124-40</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-124-40) / 40 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0124-40</NDC11Code>
<ProductNDC>61703-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20221017</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>61703-161-05</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 CARTON (61703-161-05) / 2 mL in 1 VIAL, MULTI-DOSE (61703-161-02) </PackageDescription>
<NDC11Code>61703-0161-05</NDC11Code>
<ProductNDC>61703-161</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20241104</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>61703-343-65</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-65) / 12.5 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0343-65</NDC11Code>
<ProductNDC>61703-343</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitoxantrone</ProprietaryName>
<NonProprietaryName>Mitoxantrone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076871</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MITOXANTRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.</IndicationAndUsage>
<Description>Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>61703-343-66</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (61703-343-66) / 15 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>61703-0343-66</NDC11Code>
<ProductNDC>61703-343</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mitoxantrone</ProprietaryName>
<NonProprietaryName>Mitoxantrone</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076871</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>MITOXANTRONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mitoxantrone is indicated for reducing neurologic disability and/or the frequency of clinical relapses in patients with secondary (chronic) progressive, progressive relapsing, or worsening relapsing-remitting multiple sclerosis (i.e., patients whose neurologic status is significantly abnormal between relapses). Mitoxantrone is not indicated in the treatment of patients with primary progressive multiple sclerosis. The clinical patterns of multiple sclerosis in the studies were characterized as follows: secondary progressive and progressive relapsing disease were characterized by gradual increasing disability with or without superimposed clinical relapses, and worsening relapsing-remitting disease was characterized by clinical relapses resulting in a step-wise worsening of disability. Mitoxantrone in combination with corticosteroids is indicated as initial chemotherapy for the treatment of patients with pain related to advanced hormone-refractory prostate cancer. Mitoxantrone in combination with other approved drug(s) is indicated in the initial therapy of acute nonlymphocytic leukemia (ANLL) in adults. This category includes myelogenous, promyelocytic, monocytic, and erythroid acute leukemias.</IndicationAndUsage>
<Description>Mitoxantrone Injection, USP (concentrate) is a synthetic antineoplastic anthracenedione for intravenous use. The molecular formula is C22H28N4O6∙2HCl and the molecular weight is 517.41. It is supplied as a concentrate that MUST BE DILUTED PRIOR TO INJECTION. The concentrate is a sterile, nonpyrogenic, dark blue aqueous solution containing mitoxantrone hydrochloride equivalent to 2 mg/mL mitoxantrone free base, with sodium chloride (0.80% w/v), sodium metabisulfite (0.01% w/v), sodium acetate (0.005% w/v), acetic acid (0.046% w/v), and Water for Injection, USP as inactive ingredients. The solution has a pH of 3.0 to 4.5 and contains 0.14 mEq of sodium per mL. The product does not contain preservatives. The chemical name is 1, 4-dihydroxy-5, 8-bis[[2-[(2-hydroxyethyl) amino]ethyl]amino]-9,10- anthracenedione dihydrochloride and the structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>61703-350-10</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 CARTON (61703-350-10) / 2 mL in 1 VIAL, MULTI-DOSE (61703-350-09) </PackageDescription>
<NDC11Code>61703-0350-10</NDC11Code>
<ProductNDC>61703-350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20140925</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>61703-350-38</NDCCode>
<PackageDescription>5 VIAL, MULTI-DOSE in 1 CARTON (61703-350-38) / 2 mL in 1 VIAL, MULTI-DOSE (61703-350-37) </PackageDescription>
<NDC11Code>61703-0350-38</NDC11Code>
<ProductNDC>61703-350</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20050727</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20050727</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>61703-408-25</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-408-25) / 40 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0408-25</NDC11Code>
<ProductNDC>61703-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20131111</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>61703-408-41</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61703-408-41) / 40 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61703-0408-41</NDC11Code>
<ProductNDC>61703-408</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methotrexate</ProprietaryName>
<NonProprietaryName>Methotrexate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20010226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA011719</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>METHOTREXATE SODIUM</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Folate Analog Metabolic Inhibitor [EPC], Folic Acid Metabolism Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methotrexate Injection is a folate analog metabolic inhibitor indicated for: 1 The following neoplastic diseases for the:oTreatment of adult and pediatric patients with acute lymphoblastic leukemia as part of a combination chemotherapy regimen. (1.1)oProphylaxis and treatment of adult and pediatric patients with meningeal leukemia. (1.2)oTreatment of adult and pediatric patients with non-Hodgkin lymphoma. (1.3)oTreatment of adult and pediatric patients with osteosarcoma as part of a combination chemotherapy regimen. (1.4)oTreatment of adults with breast cancer as part of a combination chemotherapy regimen. (1.5)oTreatment of adults with squamous cell carcinoma of the head and neck as a single agent. (1.6)oTreatment of adults with gestational trophoblastic neoplasia as part of a combination chemotherapy regimen. (1.7), 2 Treatment of adults with rheumatoid arthritis (RA). (1.8), 3 Treatment of pediatric patients with polyarticular juvenile idiopathic arthritis (pJIA). (1.9), 4 Treatment of adults with severe psoriasis. (1.10).</IndicationAndUsage>
<Description>Methotrexate is a folate analog metabolic inhibitor with the chemical name of N-[4-[[(2,4-diamino-6-pteridinyl) methyl]methylamino]benzoyl]-L-glutamic acid and a molecular weight of 454.44. The molecular formula is C20H22N8O5 , and the structural formula is shown below. Methotrexate Injection with preservative is supplied in sterile multiple-dose vials for intravenous, intramuscular, or subcutaneous use. : 1 Each 25 mg/mL, 2 mL vial contains 50 mg methotrexate equivalent to 54.8 mg of methotrexate sodium, 18.8 mg of benzyl alcohol as a preservative and Sodium chloride 5.2 mg. May contain sodium hydroxide and/or hydrochloric acid to adjust the pH to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>0093-5376-01</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5376-01) </PackageDescription>
<NDC11Code>00093-5376-01</NDC11Code>
<ProductNDC>0093-5376</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5376-84</NDCCode>
<PackageDescription>48 BLISTER PACK in 1 CARTON (0093-5376-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5376-19) </PackageDescription>
<NDC11Code>00093-5376-84</NDC11Code>
<ProductNDC>0093-5376</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5377-01</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5377-01) </PackageDescription>
<NDC11Code>00093-5377-01</NDC11Code>
<ProductNDC>0093-5377</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5377-84</NDCCode>
<PackageDescription>48 BLISTER PACK in 1 CARTON (0093-5377-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5377-19) </PackageDescription>
<NDC11Code>00093-5377-84</NDC11Code>
<ProductNDC>0093-5377</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200730</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200730</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5416-01</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5416-01) </PackageDescription>
<NDC11Code>00093-5416-01</NDC11Code>
<ProductNDC>0093-5416</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180417</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5417-01</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5417-01) </PackageDescription>
<NDC11Code>00093-5417-01</NDC11Code>
<ProductNDC>0093-5417</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5417-84</NDCCode>
<PackageDescription>48 BLISTER PACK in 1 CARTON (0093-5417-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5417-19) </PackageDescription>
<NDC11Code>00093-5417-84</NDC11Code>
<ProductNDC>0093-5417</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5419-01</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOTTLE (0093-5419-01) </PackageDescription>
<NDC11Code>00093-5419-01</NDC11Code>
<ProductNDC>0093-5419</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
<NDC>
<NDCCode>0093-5419-84</NDCCode>
<PackageDescription>48 BLISTER PACK in 1 CARTON (0093-5419-84) / 1 TABLET, ORALLY DISINTEGRATING in 1 BLISTER PACK (0093-5419-19) </PackageDescription>
<NDC11Code>00093-5419-84</NDC11Code>
<ProductNDC>0093-5419</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clozapine</ProprietaryName>
<NonProprietaryName>Clozapine</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090308</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>CLOZAPINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clozapine orally disintegrating tablets (Clozapine ODT) is an atypical antipsychotic indicated for: : 1 Treatment of severely ill patients with schizophrenia who fail to respond adequately to standard antipsychotic treatment. Because of the risks of severe neutropenia and of seizure associated with its use, Clozapine ODT should be used only in patients who have failed to respond adequately to standard antipsychotic treatment (1.1) , 2 Reducing the risk of recurrent suicidal behavior in patients with schizophrenia or schizoaffective disorder who are judged to be at chronic risk for re-experiencing suicidal behavior (1.2).</IndicationAndUsage>
<Description>Clozapine, USP an atypical antipsychotic drug, is a tricyclic dibenzodiazepine derivative, 8-chloro-11-(4-methyl-1-piperazinyl)-5H-dibenzo [b,e] [1,4] diazepine. The structural formula is. C18H19CIN4 M.W. 326.82. Clozapine Orally Disintegrating Tablets (referred to as Clozapine ODT) is available as yellow, orally disintegrating tablets of 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg for oral administration without water. Clozapine Orally Disintegrating Tablets may be chewed. Each orally disintegrating tablet contains clozapine, USP, equivalent to 12.5 mg, 25 mg, 100 mg, 150 mg, and 200 mg. The active component of Clozapine Orally Disintegrating Tablets is clozapine, USP. Inactive ingredients include aspartame powder, colloidal silicon dioxide, crospovidone, magnesium stearate, mannitol, microcrystalline cellulose, peppermint flavor, sodium stearyl fumarate and xylitol. Clozapine ODT contains aspartame [see Warnings and Precautions (5.18)]. Phenylalanine is a component of aspartame. Each 12.5 mg, orally disintegrating tablet contains 2.5 mg aspartame, thus, 1.4 mg phenylalanine. Each 25 mg, orally disintegrating tablet contains 5 mg aspartame, thus, 2.8 mg phenylalanine. Each 100 mg, orally disintegrating tablet contains 20 mg aspartame, thus, 11.2 mg phenylalanine. Each 150 mg, orally disintegrating tablet contains 30 mg aspartame, thus, 16.8 mg phenylalanine. Each 200 mg, orally disintegrating tablet contains 40 mg aspartame, thus, 22.4 mg phenylalanine.</Description>
</NDC>
</NDCList>