RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "61919-234-80",
      "PackageDescription": "80 g in 1 TUBE (61919-234-80) ",
      "NDC11Code": "61919-0234-80",
      "ProductNDC": "61919-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Triamcinolone Acetonide",
      "NonProprietaryName": "Triamcinolone Acetonide",
      "DosageFormName": "CREAM",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20260316",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA088042",
      "LabelerName": "Direct_Rx",
      "SubstanceName": "TRIAMCINOLONE ACETONIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/g",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-04-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260316",
      "SamplePackage": "N",
      "IndicationAndUsage": "Triamcinolone acetonide cream, 0.1% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
      "Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide is designated chemically as 9-Fluoro-11β, 16α, 17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. [Chemical Structure]. Each gram of 0.1% triamcinolone acetonide cream provides 1 mg triamcinolone acetonide, respectively, in a vanishing cream base containing cetyl alcohol, cetyl esters wax, glyceryl monostearate, isopropyl palmitate, polysorbate-60, polysorbate-80, propylene glycol and purified water."
    },
    {
      "NDCCode": "61919-313-80",
      "PackageDescription": "80 TABLET in 1 BOTTLE (61919-313-80) ",
      "NDC11Code": "61919-0313-80",
      "ProductNDC": "61919-313",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Metformin Hydrochloride",
      "NonProprietaryName": "Metformin Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20190827",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA090564",
      "LabelerName": "Direct_Rx",
      "SubstanceName": "METFORMIN HYDROCHLORIDE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Biguanide [EPC],Biguanides [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2021-01-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20211231",
      "StartMarketingDatePackage": "20190827",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "61919-234-15",
      "PackageDescription": "15 g in 1 TUBE (61919-234-15)",
      "NDC11Code": "61919-0234-15",
      "ProductNDC": "61919-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Triamcinolone Acetonide",
      "NonProprietaryName": "Triamcinolone Acetonide",
      "DosageFormName": "CREAM",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20140101",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA088042",
      "LabelerName": "DIRECT RX",
      "SubstanceName": "TRIAMCINOLONE ACETONIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/g",
      "Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "INDICATIONS AND USAGE    Triamcinolone acetonide cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
      "Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Chemically triamcinolone acetonide is pregna-1, 4-diene-3, 20-dione, 9-flouro-11, 21-dihydroxy-16, 17-[(1-methylethylidene)bis(oxy)]-(11β16a). Its structural formula is. Each gram of triamcinolone acetonide cream contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate."
    },
    {
      "NDCCode": "61919-234-30",
      "PackageDescription": "30 g in 1 TUBE (61919-234-30) ",
      "NDC11Code": "61919-0234-30",
      "ProductNDC": "61919-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Triamcinolone Acetonide",
      "NonProprietaryName": "Triamcinolone Acetonide",
      "DosageFormName": "CREAM",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20260316",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA088042",
      "LabelerName": "Direct_Rx",
      "SubstanceName": "TRIAMCINOLONE ACETONIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/g",
      "Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-04-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260316",
      "SamplePackage": "N",
      "IndicationAndUsage": "Triamcinolone acetonide cream, 0.1% is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
      "Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone acetonide is designated chemically as 9-Fluoro-11β, 16α, 17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. [Chemical Structure]. Each gram of 0.1% triamcinolone acetonide cream provides 1 mg triamcinolone acetonide, respectively, in a vanishing cream base containing cetyl alcohol, cetyl esters wax, glyceryl monostearate, isopropyl palmitate, polysorbate-60, polysorbate-80, propylene glycol and purified water."
    },
    {
      "NDCCode": "16590-234-80",
      "PackageDescription": "80 g in 1 TUBE (16590-234-80)",
      "NDC11Code": "16590-0234-80",
      "ProductNDC": "16590-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Triamcinolone Acetonide",
      "NonProprietaryName": "Triamcinolone Acetonide",
      "DosageFormName": "CREAM",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "19810409",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA086414",
      "LabelerName": "STAT RX LLC USA",
      "SubstanceName": "TRIAMCINOLONE ACETONIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/g",
      "Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2018-02-07",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Topical corticosteroids are indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
      "Description": "Rx Only. The topical corticosteriods constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is designated chemically as pregna-1,4-diene-3, 20-dione, 9-fluoro-11, 21-dihydroxy-16, 17-[(1-methylethylidene)bis (0xy)]-, (11β, 16α)-. C24H31FO6,M.W.:434.51; CAS Reg.No.:76-25-5. Each gram of 0.025%, 0.1% and 0.5% Triamcinolone Acetonide Ointment USP provides 0.25 mg, 1 mg, or 5 mg triamcinolone acetonide respectively in an ointment base of White Petrolatum and Light Mineral Oil."
    },
    {
      "NDCCode": "42961-234-05",
      "PackageDescription": "80 PACKAGE in 1 BOX (42961-234-05)  / 2 TABLET in 1 PACKAGE (42961-234-01) ",
      "NDC11Code": "42961-0234-05",
      "ProductNDC": "42961-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Xpect Pain Away Extra Strength",
      "NonProprietaryName": "Acetaminophen Aspirin Caffeine",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20230726",
      "MarketingCategoryName": "OTC MONOGRAPH DRUG",
      "ApplicationNumber": "M013",
      "LabelerName": "Cintas Corporation",
      "SubstanceName": "ACETAMINOPHEN; ASPIRIN; CAFFEINE",
      "StrengthNumber": "250; 250; 65",
      "StrengthUnit": "mg/1; mg/1; mg/1",
      "Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Central Nervous System Stimulant [EPC], Central Nervous System Stimulation [PE], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Methylxanthine [EPC], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC], Xanthines [CS]",
      "Status": "Active",
      "LastUpdate": "2025-09-25",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20241227",
      "SamplePackage": "N",
      "IndicationAndUsage": "Uses: 1 temporarily relieves minor aches and pains due to:  a cold  toothache  headache  muscular aches  arthritis  premenstrual and menstrual cramps ."
    },
    {
      "NDCCode": "61919-247-32",
      "PackageDescription": "100 mL in 1 BOTTLE (61919-247-32) ",
      "NDC11Code": "61919-0247-32",
      "ProductNDC": "61919-247",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Lidocaine Hydrochloride",
      "NonProprietaryName": "Lidocaine Hydrochloride",
      "DosageFormName": "SOLUTION",
      "RouteName": "OROPHARYNGEAL",
      "StartMarketingDate": "20140101",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA040708",
      "LabelerName": "DIRECT RX",
      "SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
      "Status": "Deprecated",
      "LastUpdate": "2023-01-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20221231",
      "StartMarketingDatePackage": "20150325",
      "SamplePackage": "N",
      "IndicationAndUsage": "Lidocaine hydrochloride oral topical solution USP, 2% (viscous) is indicated for the production of topical anesthesia of irritated or inflamed mucous membranes of the mouth and pharynx. It is also useful for reducing gagging during the taking of X-ray pictures and dental impressions.",
      "Description": "Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains a local anesthetic agent and is administered topically. Lidocaine hydrochloride oral topical solution USP, 2% (viscous) contains lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the following structural formula. The molecular formula of lidocaine is C14H22N2O. The molecular weight is 234.34. COMPOSITION OF SOLUTION. Each mL contains 20 mg of lidocaine HCl, artificial cherry flavor, methylparaben, propylparaben, saccharin sodium, sodium carboxymethylcellulose, and sodium hydroxide in purified water. The pH is adjusted to 5.0 to 7.0 with hydrochloric acid and/or sodium hydroxide."
    },
    {
      "NDCCode": "61919-520-32",
      "PackageDescription": "20 mL in 1 BOTTLE (61919-520-32) ",
      "NDC11Code": "61919-0520-32",
      "ProductNDC": "61919-520",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Lidocaine Hydrochloride",
      "NonProprietaryName": "Lidocaine Hydrochloride",
      "DosageFormName": "SOLUTION",
      "RouteName": "ORAL; TOPICAL",
      "StartMarketingDate": "20170222",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA040014",
      "LabelerName": "DIRECT RX",
      "SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
      "Status": "Deprecated",
      "LastUpdate": "2023-01-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20221231",
      "StartMarketingDatePackage": "20170222",
      "SamplePackage": "N",
      "IndicationAndUsage": "Lidocaine Hydrochloride Oral Topical Solution, USP (Viscous) 2% is indicated for the production of topical anesthesia of irritated or inflamed mucous membranes of the mouth and pharynx. It is also useful for reducing gagging during the taking of X-ray pictures and dental impressions.",
      "Description": "Lidocaine Hydrochloride Oral Topical Solution, USP (Viscous) 2% contains a local anesthetic agent and is administered topically. Lidocaine Hydrochloride Oral Topical Solution, USP (Viscous) 2% contains lidocaine hydrochloride, which is chemically designated as acetamide, 2-(diethylamino)-N- (2,6 dimethylphenyl)-, monohydrochloride and has the following structural formula. [Chemical Structure]. The molecular formula of lidocaine is C14H22N2O. The molecular weight is 234.34."
    },
    {
      "NDCCode": "0026-3942-25",
      "PackageDescription": "1 KIT in 1 BOX (0026-3942-25)  *  2.5 mL in 1 VIAL (0026-4942-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
      "NDC11Code": "00026-3942-25",
      "ProductNDC": "0026-3942",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3942-99",
      "PackageDescription": "1 KIT in 1 BOX (0026-3942-99)  *  2.5 mL in 1 VIAL (0026-4942-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4942-01) ",
      "NDC11Code": "00026-3942-99",
      "ProductNDC": "0026-3942",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3944-25",
      "PackageDescription": "1 KIT in 1 BOX (0026-3944-25)  *  2.5 mL in 1 VIAL (0026-4944-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
      "NDC11Code": "00026-3944-25",
      "ProductNDC": "0026-3944",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3944-99",
      "PackageDescription": "1 KIT in 1 BOX (0026-3944-99)  *  2.5 mL in 1 VIAL (0026-4944-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4944-01) ",
      "NDC11Code": "00026-3944-99",
      "ProductNDC": "0026-3944",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3946-25",
      "PackageDescription": "1 KIT in 1 BOX (0026-3946-25)  *  2.5 mL in 1 VIAL (0026-4946-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
      "NDC11Code": "00026-3946-25",
      "ProductNDC": "0026-3946",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3946-99",
      "PackageDescription": "1 KIT in 1 BOX (0026-3946-99)  *  2.5 mL in 1 VIAL (0026-4946-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4946-01) ",
      "NDC11Code": "00026-3946-99",
      "ProductNDC": "0026-3946",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3948-25",
      "PackageDescription": "1 KIT in 1 BOX (0026-3948-25)  *  2.5 mL in 1 VIAL (0026-4948-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
      "NDC11Code": "00026-3948-25",
      "ProductNDC": "0026-3948",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3948-99",
      "PackageDescription": "1 KIT in 1 BOX (0026-3948-99)  *  2.5 mL in 1 VIAL (0026-4948-99)  *  2.5 mL in 1 SYRINGE (0026-0426-02)  *  2.5 mL in 1 VIAL, SINGLE-USE (0026-4948-01) ",
      "NDC11Code": "00026-3948-99",
      "ProductNDC": "0026-3948",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180830",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20180830",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3950-50",
      "PackageDescription": "1 KIT in 1 BOX (0026-3950-50)  *  5 mL in 1 VIAL (0026-4950-99)  *  5 mL in 1 SYRINGE (0026-0426-05)  *  5 mL in 1 VIAL, SINGLE-USE (0026-4950-01)  *  5 mL in 1 SYRINGE (0026-0426-15) ",
      "NDC11Code": "00026-3950-50",
      "ProductNDC": "0026-3950",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20241202",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20241202",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "0026-3950-99",
      "PackageDescription": "1 KIT in 1 BOX (0026-3950-99)  *  5 mL in 1 VIAL (0026-4950-99)  *  5 mL in 1 SYRINGE (0026-0426-05)  *  5 mL in 1 VIAL, SINGLE-USE (0026-4950-01)  *  5 mL in 1 SYRINGE (0026-0426-15) ",
      "NDC11Code": "00026-3950-99",
      "ProductNDC": "0026-3950",
      "ProductTypeName": "PLASMA DERIVATIVE",
      "ProprietaryName": "Jivi",
      "NonProprietaryName": "Antihemophilic Factor (recombinant) Pegylated-aucl",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20241202",
      "MarketingCategoryName": "BLA",
      "ApplicationNumber": "BLA125661",
      "LabelerName": "Bayer HealthCare LLC",
      "Status": "Active",
      "LastUpdate": "2026-03-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20241202",
      "SamplePackage": "N",
      "IndicationAndUsage": "JIVI, is indicated for use in previously treated adults and pediatric patients 7 years of age and older with hemophilia A (congenital Factor VIII deficiency) for: 1 On-demand treatment and control of bleeding episodes, 2 Perioperative management of bleeding, 3 Routine prophylaxis to reduce the frequency of bleeding episodes .",
      "Description": "JIVI [antihemophilic factor (recombinant), PEGylated-aucl] is a sterile, nonpyrogenic, preservative-free, white to slightly yellow lyophilized powder for reconstitution with sterile Water for Injection (sWFI) as diluent for intravenous (IV) administration. The product is supplied in single-dose vials containing dosage strengths of 500, 1000, 2000 and 3000 IU in 2.5 mL fill size and 4000 IU in 5 mL fill size. For each dosage strength, the actual assayed potency is directly printed on each vial label. The container closure system consists of a 10 mL, Type I glass vial sealed with a bromobutyl grey stopper and an aluminum crimp seal with plastic flip-off cap plus vial adapter. The vial adapter was designed to connect with the sWFI, prefilled diluent syringe. The 500, 1000, 2000, and 3000 IU vials of JIVI are formulated with the following excipients: 59 mg glycine, 27 mg sucrose, 8.4 mg histidine, 4.7 mg sodium chloride, 0.7 mg calcium chloride, and 0.216 mg polysorbate 80. The 4000 IU vial of Jivi is formulated with the following quantities of these excipients: 114 mg glycine, 52 mg sucrose, 16.1 mg histidine, 9.1 mg sodium chloride, 1.9 mg calcium chloride, and 0.416 mg polysorbate 80. The pH of the reconstituted product is 6.6 to 7.0. The specific activity of JIVI is approximately 10,000 IU/mg protein. The active protein (or starting molecule), prior to conjugation is a recombinant B-domain deleted human coagulation Factor VIII (BDD-rFVIII) produced by recombinant DNA technology in Baby Hamster Kidney (BHK) cells. JIVI is produced by site-specific conjugation of the BDD-rFVIII variant K1804C at the cysteine amino acid position 1804 (within the A3 domain) with a single maleimide-derivatized, 60 kilodalton (kDa) branched PEG (two 30 kDa PEG) moiety. The A3 domain was selected for conjugation to provide both a consistent coagulation activity and high PEGylation efficiency. The molecular weight of JIVI is approximately 234 kDa based on the calculated average molecular weight of the BDD-rFVIII variant of 165 kDa, plus glycosylation (~4 kDa), and the average molecular weight of the PEG-maleimide of approximately 60 kDa. Functional characterization of JIVI shows comparable mechanism of action to that of rFVIII product with an extended plasma half-life [see Clinical Pharmacology (12.1)]. The manufacturing process of JIVI involves propagation of the recombinant production cell line with the harvest isolation process consisting of continuous filtration of tissue culture fluid and anion exchange chromatography on a membrane adsorber capsule. The process intermediate is purified from process- and product-related impurities using a series of chromatography and filtration steps, including 20 nm viral filtration, prior to conjugation to the 60 kDa maleimide PEG moiety. The mono-PEGylated JIVI active molecule is separated from product-related species by chromatography and then formulated by ultrafiltration. The cell culture, PEGylation, purification process and formulation used in the manufacture of JIVI do not use any additives of human or animal origins."
    },
    {
      "NDCCode": "16729-234-01",
      "PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16729-234-01) ",
      "NDC11Code": "16729-0234-01",
      "ProductNDC": "16729-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ropinirole",
      "NonProprietaryName": "Ropinirole",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20181017",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204022",
      "LabelerName": "Accord Healthcare Inc.",
      "SubstanceName": "ROPINIROLE HYDROCHLORIDE",
      "StrengthNumber": "1",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Dopamine Agonists [MoA], Nonergot Dopamine Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2024-10-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20181017",
      "SamplePackage": "N",
      "IndicationAndUsage": "Ropinirole tablets are a non-ergoline dopamine agonist indicated for the treatment of Parkinson’s disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). ( 1.1,1.2).",
      "Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the molecular formula is C 16H 24N 2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to yellow solid with a melting range of 243°C to 250°C and a solubility of 133 mg/mL in water. Each film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25, 0.5, 1, 2, 3, 4, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, and magnesium stearate, microcrystalline cellulose. The film coating of the tablet consists of following inactive ingredients. 0.25 mg: hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide. 0.5 mg: FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol and titanium dioxide. 1 mg: FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, iron oxide yellow, polyethylene glycol and titanium dioxide. 2 mg: hypromellose, iron oxide red, iron oxide yellow, polyethylene glycol and titanium dioxide. 3 mg: carmine, FD&C Blue #2/Indigo carmine aluminum lake, FD&C Yellow No. 6/Sunset yellow FCF aluminum lake, hypromellose, polyethylene glycol and titanium dioxide. 4 mg: hypromellose, iron oxide black, iron oxide red, iron oxide yellow, polyethylene glycol and titanium dioxide. 5 mg: FD&C Blue #2/Indigo carmine aluminum lake, hypromellose, polyethylene glycol, polysorbate 80 and titanium dioxide."
    },
    {
      "NDCCode": "21695-407-01",
      "PackageDescription": "6 DIALPACK in 1 CARTON (21695-407-01)  > 1 KIT in 1 DIALPACK",
      "NDC11Code": "21695-0407-01",
      "ProductNDC": "21695-407",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trinessa",
      "NonProprietaryName": "Norgestimate And Ethinyl Estradiol",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20070817",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA019697",
      "LabelerName": "Rebel Distributors Corp",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "TriNessa® is indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. TriNessa is indicated for the treatment of moderate acne vulgaris in females at least 15 years of age, who have no known contraindications to oral contraceptive therapy, and have achieved menarche. TriNessa should be used for the treatment of acne only if the patient desires an oral contraceptive for birth control. Oral contraceptives are highly effective for pregnancy prevention. Table II lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates. TriNessa has not been studied for and is not indicated for use in emergency contraception. In four clinical trials with TriNessa, a total of 4,756 subjects completed 45,244 cycles, and the use-efficacy pregnancy rate was approximately 1 pregnancy per 100 womenyears. TriNessa was evaluated for the treatment of acne vulgaris in two randomized, double-blind, placebo-controlled, multicenter, Phase 3, six (28 day) cycle studies.221 patients received TriNessa and 234 patients received placebo. Mean age at enrollment for both groups was 28 years. At the end of 6 months, the mean total lesion count changes from 55 to 31 (42% reduction) in patients treated with TriNessa and from 54 to 38 (27% reduction) in patients similarly treated with placebo.Table III summarizes the changes in lesion count for each type of lesion in the ITT population. Based on the investigator’s global assessment conducted at the final visit, patients treated with TriNessa showed a statistically significant improvement in total lesions compared to those treated with placebo.",
      "Description": "The following product is a combination oral contraceptive containing the progestational compound norgestimate and the estrogenic compound ethinyl estradiol. TriNessa® Tablets. Each white tablet contains 0.180 mg of the progestational compound, norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-, oxime,(17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, purified water and titanium dioxide. Each light blue tablet contains 0.215 mg of the progestational compound norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-,oxime, (17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include FD & C Blue No.2 Aluminum Lake, carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, purified water and titanium dioxide. Each blue tablet contains 0.250 mg of the progestational compound norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one, 17-(acetyloxy)-13-ethyl-,oxime,(17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include FD & C Blue No.2 Aluminum Lake, carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, purified water and titanium dioxide. Each dark green tablet contains only inert ingredients, as follows: FD & C Blue No. 2 Aluminum Lake, ferric oxide, hypromellose, lactose, magnesium stearate, polyethylene glycol, pregelatinized corn starch, purified water, talc and titanium dioxide."
    },
    {
      "NDCCode": "29300-234-10",
      "PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (29300-234-10) ",
      "NDC11Code": "29300-0234-10",
      "ProductNDC": "29300-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20180504",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209261",
      "LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "160",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-09-17",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20180515",
      "SamplePackage": "N",
      "IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension , to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart  failure in adults (1.2), 3 Post-myocardial infarction , for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
      "Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan, USP is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white or almost white, hygroscopic powder. It is freely soluble in anhydrous ethanol, sparingly soluble in methylene chloride, practically insoluble in water. Valsartan, USP is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, ferric oxide yellow (in 80 mg, and 160 mg), hypromellose, lactose monhydrate, magnesium stearate, microcrystalline cellulose, polyethelene glycol, povidone, sodium lauryl sulphate, talc (in 40 mg, and 320 mg) and titanium dioxide."
    },
    {
      "NDCCode": "29300-234-13",
      "PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (29300-234-13) ",
      "NDC11Code": "29300-0234-13",
      "ProductNDC": "29300-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20180504",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209261",
      "LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "160",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-09-17",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20180515",
      "SamplePackage": "N",
      "IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension , to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart  failure in adults (1.2), 3 Post-myocardial infarction , for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
      "Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan, USP is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white or almost white, hygroscopic powder. It is freely soluble in anhydrous ethanol, sparingly soluble in methylene chloride, practically insoluble in water. Valsartan, USP is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, ferric oxide yellow (in 80 mg, and 160 mg), hypromellose, lactose monhydrate, magnesium stearate, microcrystalline cellulose, polyethelene glycol, povidone, sodium lauryl sulphate, talc (in 40 mg, and 320 mg) and titanium dioxide."
    },
    {
      "NDCCode": "29300-234-19",
      "PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (29300-234-19) ",
      "NDC11Code": "29300-0234-19",
      "ProductNDC": "29300-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20180504",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209261",
      "LabelerName": "Unichem Pharmaceuticals (USA), Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "160",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-09-17",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20180515",
      "SamplePackage": "N",
      "IndicationAndUsage": "Valsartan tablets are an angiotensin II receptor blocker (ARB) indicated for: 1 Hypertension , to lower blood pressure in adults and children 6 years and older. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions (1.1), 2 Heart failure (NYHA class II-IV), to reduce hospitalization for heart  failure in adults (1.2), 3 Post-myocardial infarction , for the reduction of cardiovascular mortality in clinically stable patients with left ventricular failure or left ventricular dysfunction following myocardial infarction in adults (1.3).",
      "Description": "Valsartan, USP is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan, USP is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its molecular formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white or almost white, hygroscopic powder. It is freely soluble in anhydrous ethanol, sparingly soluble in methylene chloride, practically insoluble in water. Valsartan, USP is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, ferric oxide yellow (in 80 mg, and 160 mg), hypromellose, lactose monhydrate, magnesium stearate, microcrystalline cellulose, polyethelene glycol, povidone, sodium lauryl sulphate, talc (in 40 mg, and 320 mg) and titanium dioxide."
    },
    {
      "NDCCode": "42858-234-01",
      "PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (42858-234-01) ",
      "NDC11Code": "42858-0234-01",
      "ProductNDC": "42858-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Dilaudid",
      "NonProprietaryName": "Hydromorphone Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170515",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA019892",
      "LabelerName": "Rhodes Pharmaceuticals LLC",
      "SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
      "StrengthNumber": "4",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
      "DEASchedule": "CII",
      "Status": "Active",
      "LastUpdate": "2026-05-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170515",
      "SamplePackage": "N",
      "IndicationAndUsage": "DILAUDID Oral Solution and DILAUDID Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.2)], reserve opioid analgesics, including DILAUDID Oral Solution and DILAUDID Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
      "Description": "DILAUDID (hydromorphone hydrochloride), a hydrogenated ketone of morphine, is an opioid agonist. DILAUDID Tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. DILAUDID Oral Solution is supplied as 5 mg/5 mL (1 mg/mL) viscous liquid. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3∙HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. DILAUDID Tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye. Each 5 mL (1 teaspoon) of DILAUDID Oral Solution contains 5 mg of hydromorphone hydrochloride. The inactive ingredients are purified water, methylparaben, propylparaben, sucrose, and glycerin. DILAUDID Oral Solution may contain traces of sodium metabisulfite."
    },
    {
      "NDCCode": "42858-234-50",
      "PackageDescription": "500 TABLET in 1 BOTTLE, PLASTIC (42858-234-50) ",
      "NDC11Code": "42858-0234-50",
      "ProductNDC": "42858-234",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Dilaudid",
      "NonProprietaryName": "Hydromorphone Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170515",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA019892",
      "LabelerName": "Rhodes Pharmaceuticals LLC",
      "SubstanceName": "HYDROMORPHONE HYDROCHLORIDE",
      "StrengthNumber": "4",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
      "DEASchedule": "CII",
      "Status": "Active",
      "LastUpdate": "2026-05-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170515",
      "SamplePackage": "N",
      "IndicationAndUsage": "DILAUDID Oral Solution and DILAUDID Tablets are indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.2)], reserve opioid analgesics, including DILAUDID Oral Solution and DILAUDID Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
      "Description": "DILAUDID (hydromorphone hydrochloride), a hydrogenated ketone of morphine, is an opioid agonist. DILAUDID Tablets are supplied in 2 mg, 4 mg, and 8 mg tablets for oral administration. The tablet strengths describe the amount of hydromorphone hydrochloride in each tablet. DILAUDID Oral Solution is supplied as 5 mg/5 mL (1 mg/mL) viscous liquid. The chemical name is 4,5α-epoxy-3-hydroxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 321.80. Its molecular formula is C17H19NO3∙HCl, and it has the following chemical structure. Hydromorphone hydrochloride is a white or almost white crystalline powder that is freely soluble in water, very slightly soluble in ethanol (96%), and practically insoluble in methylene chloride. The 2 mg, 4 mg, and 8 mg tablets contain the following inactive ingredients: lactose anhydrous and magnesium stearate. DILAUDID Tablets may also contain traces of sodium metabisulfite. The 2 mg tablets also contain D&C red #30 Lake dye and D&C yellow #10 Lake dye. The 4 mg tablets also contain D&C yellow #10 Lake dye. Each 5 mL (1 teaspoon) of DILAUDID Oral Solution contains 5 mg of hydromorphone hydrochloride. The inactive ingredients are purified water, methylparaben, propylparaben, sucrose, and glycerin. DILAUDID Oral Solution may contain traces of sodium metabisulfite."
    },
    {
      "NDCCode": "50021-234-01",
      "PackageDescription": "234 g in 1 TUBE (50021-234-01)",
      "NDC11Code": "50021-0234-01",
      "ProductNDC": "50021-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sunzone Spf-60",
      "ProprietaryNameSuffix": "Broad Spectrum",
      "NonProprietaryName": "Avobenzone And Octinoxate",
      "DosageFormName": "LOTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20121113",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part352",
      "LabelerName": "Empack Spraytech Inc.",
      "SubstanceName": "OCTINOXATE; AVOBENZONE",
      "StrengthNumber": "9.36; 7.02",
      "StrengthUnit": "g/234g; g/234g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Apply liberally and spread evenly 15 minutes before sun exposure. Reapply after 80 minutes of swimmin or sweating. immediately after swimming, towel drying. At least every 2 hours."
    },
    {
      "NDCCode": "50021-234-02",
      "PackageDescription": "234 g in 1 TUBE (50021-234-02)",
      "NDC11Code": "50021-0234-02",
      "ProductNDC": "50021-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sunzone Spf-60",
      "ProprietaryNameSuffix": "Broad Spectrum",
      "NonProprietaryName": "Avobenzone And Octinoxate",
      "DosageFormName": "LOTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20121113",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part352",
      "LabelerName": "Empack Spraytech Inc.",
      "SubstanceName": "OCTINOXATE; AVOBENZONE",
      "StrengthNumber": "9.36; 7.02",
      "StrengthUnit": "g/234g; g/234g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Apply liberally and spread evenly 15 minutes before sun exposure. Reapply after 80 minutes of swimmin or sweating. immediately after swimming, towel drying. At least every 2 hours."
    },
    {
      "NDCCode": "50021-234-03",
      "PackageDescription": "234 g in 1 TUBE (50021-234-03)",
      "NDC11Code": "50021-0234-03",
      "ProductNDC": "50021-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sunzone Spf-60",
      "ProprietaryNameSuffix": "Broad Spectrum",
      "NonProprietaryName": "Avobenzone And Octinoxate",
      "DosageFormName": "LOTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20121113",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part352",
      "LabelerName": "Empack Spraytech Inc.",
      "SubstanceName": "OCTINOXATE; AVOBENZONE",
      "StrengthNumber": "9.36; 7.02",
      "StrengthUnit": "g/234g; g/234g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Apply liberally and spread evenly 15 minutes before sun exposure. Reapply after 80 minutes of swimmin or sweating. immediately after swimming, towel drying. At least every 2 hours."
    },
    {
      "NDCCode": "50021-234-04",
      "PackageDescription": "234 g in 1 TUBE (50021-234-04)",
      "NDC11Code": "50021-0234-04",
      "ProductNDC": "50021-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sunzone Spf-60",
      "ProprietaryNameSuffix": "Broad Spectrum",
      "NonProprietaryName": "Avobenzone And Octinoxate",
      "DosageFormName": "LOTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20121113",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part352",
      "LabelerName": "Empack Spraytech Inc.",
      "SubstanceName": "OCTINOXATE; AVOBENZONE",
      "StrengthNumber": "9.36; 7.02",
      "StrengthUnit": "g/234g; g/234g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Apply liberally and spread evenly 15 minutes before sun exposure. Reapply after 80 minutes of swimmin or sweating. immediately after swimming, towel drying. At least every 2 hours."
    },
    {
      "NDCCode": "50021-234-05",
      "PackageDescription": "234 g in 1 TUBE (50021-234-05)",
      "NDC11Code": "50021-0234-05",
      "ProductNDC": "50021-234",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Sunzone Spf-60",
      "ProprietaryNameSuffix": "Broad Spectrum",
      "NonProprietaryName": "Avobenzone And Octinoxate",
      "DosageFormName": "LOTION",
      "RouteName": "TOPICAL",
      "StartMarketingDate": "20121113",
      "MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
      "ApplicationNumber": "part352",
      "LabelerName": "Empack Spraytech Inc.",
      "SubstanceName": "OCTINOXATE; AVOBENZONE",
      "StrengthNumber": "9.36; 7.02",
      "StrengthUnit": "g/234g; g/234g",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20171231",
      "IndicationAndUsage": "Apply liberally and spread evenly 15 minutes before sun exposure. Reapply after 80 minutes of swimmin or sweating. immediately after swimming, towel drying. At least every 2 hours."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"61919-234-80","ProprietaryName":"Triamcinolone Acetonide","NonProprietaryName":"Triamcinolone Acetonide"},{"NDCCode":"61919-313-80","ProprietaryName":"Metformin Hydrochloride","NonProprietaryName":"Metformin Hydrochloride"},{"NDCCode":"61919-234-15","ProprietaryName":"Triamcinolone Acetonide","NonProprietaryName":"Triamcinolone Acetonide"},{"NDCCode":"61919-234-30","ProprietaryName":"Triamcinolone Acetonide","NonProprietaryName":"Triamcinolone Acetonide"},{"NDCCode":"16590-234-80","ProprietaryName":"Triamcinolone Acetonide","NonProprietaryName":"Triamcinolone Acetonide"},{"NDCCode":"42961-234-05","ProprietaryName":"Xpect Pain Away Extra Strength","NonProprietaryName":"Acetaminophen Aspirin Caffeine"},{"NDCCode":"61919-247-32","ProprietaryName":"Lidocaine Hydrochloride","NonProprietaryName":"Lidocaine Hydrochloride"},{"NDCCode":"61919-520-32","ProprietaryName":"Lidocaine Hydrochloride","NonProprietaryName":"Lidocaine Hydrochloride"},{"NDCCode":"0026-3942-25","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3942-99","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3944-25","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3944-99","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3946-25","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3946-99","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3948-25","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3948-99","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3950-50","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"0026-3950-99","ProprietaryName":"Jivi","NonProprietaryName":"Antihemophilic Factor (recombinant) Pegylated-aucl"},{"NDCCode":"16729-234-01","ProprietaryName":"Ropinirole","NonProprietaryName":"Ropinirole"},{"NDCCode":"21695-407-01","ProprietaryName":"Trinessa","NonProprietaryName":"Norgestimate And Ethinyl Estradiol"},{"NDCCode":"29300-234-10","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"29300-234-13","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"29300-234-19","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"42858-234-01","ProprietaryName":"Dilaudid","NonProprietaryName":"Hydromorphone Hydrochloride"},{"NDCCode":"42858-234-50","ProprietaryName":"Dilaudid","NonProprietaryName":"Hydromorphone Hydrochloride"},{"NDCCode":"50021-234-01","ProprietaryName":"Sunzone Spf-60","NonProprietaryName":"Avobenzone And Octinoxate"},{"NDCCode":"50021-234-02","ProprietaryName":"Sunzone Spf-60","NonProprietaryName":"Avobenzone And Octinoxate"},{"NDCCode":"50021-234-03","ProprietaryName":"Sunzone Spf-60","NonProprietaryName":"Avobenzone And Octinoxate"},{"NDCCode":"50021-234-04","ProprietaryName":"Sunzone Spf-60","NonProprietaryName":"Avobenzone And Octinoxate"},{"NDCCode":"50021-234-05","ProprietaryName":"Sunzone Spf-60","NonProprietaryName":"Avobenzone And Octinoxate"}]}
                    

<NDCList><NDC><NDCCode>61919-234-80</NDCCode><ProprietaryName>Triamcinolone Acetonide</ProprietaryName><NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName></NDC><NDC><NDCCode>61919-313-80</NDCCode><ProprietaryName>Metformin Hydrochloride</ProprietaryName><NonProprietaryName>Metformin Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>61919-234-15</NDCCode><ProprietaryName>Triamcinolone Acetonide</ProprietaryName><NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName></NDC><NDC><NDCCode>61919-234-30</NDCCode><ProprietaryName>Triamcinolone Acetonide</ProprietaryName><NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName></NDC><NDC><NDCCode>16590-234-80</NDCCode><ProprietaryName>Triamcinolone Acetonide</ProprietaryName><NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName></NDC><NDC><NDCCode>42961-234-05</NDCCode><ProprietaryName>Xpect Pain Away Extra Strength</ProprietaryName><NonProprietaryName>Acetaminophen Aspirin Caffeine</NonProprietaryName></NDC><NDC><NDCCode>61919-247-32</NDCCode><ProprietaryName>Lidocaine Hydrochloride</ProprietaryName><NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>61919-520-32</NDCCode><ProprietaryName>Lidocaine Hydrochloride</ProprietaryName><NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>0026-3942-25</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3942-99</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3944-25</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3944-99</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3946-25</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3946-99</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3948-25</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3948-99</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3950-50</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>0026-3950-99</NDCCode><ProprietaryName>Jivi</ProprietaryName><NonProprietaryName>Antihemophilic Factor (recombinant) Pegylated-aucl</NonProprietaryName></NDC><NDC><NDCCode>16729-234-01</NDCCode><ProprietaryName>Ropinirole</ProprietaryName><NonProprietaryName>Ropinirole</NonProprietaryName></NDC><NDC><NDCCode>21695-407-01</NDCCode><ProprietaryName>Trinessa</ProprietaryName><NonProprietaryName>Norgestimate And Ethinyl Estradiol</NonProprietaryName></NDC><NDC><NDCCode>29300-234-10</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>29300-234-13</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>29300-234-19</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>42858-234-01</NDCCode><ProprietaryName>Dilaudid</ProprietaryName><NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>42858-234-50</NDCCode><ProprietaryName>Dilaudid</ProprietaryName><NonProprietaryName>Hydromorphone Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>50021-234-01</NDCCode><ProprietaryName>Sunzone Spf-60</ProprietaryName><NonProprietaryName>Avobenzone And Octinoxate</NonProprietaryName></NDC><NDC><NDCCode>50021-234-02</NDCCode><ProprietaryName>Sunzone Spf-60</ProprietaryName><NonProprietaryName>Avobenzone And Octinoxate</NonProprietaryName></NDC><NDC><NDCCode>50021-234-03</NDCCode><ProprietaryName>Sunzone Spf-60</ProprietaryName><NonProprietaryName>Avobenzone And Octinoxate</NonProprietaryName></NDC><NDC><NDCCode>50021-234-04</NDCCode><ProprietaryName>Sunzone Spf-60</ProprietaryName><NonProprietaryName>Avobenzone And Octinoxate</NonProprietaryName></NDC><NDC><NDCCode>50021-234-05</NDCCode><ProprietaryName>Sunzone Spf-60</ProprietaryName><NonProprietaryName>Avobenzone And Octinoxate</NonProprietaryName></NDC></NDCList>