{
"NDC": [
{
"NDCCode": "61919-282-12",
"PackageDescription": "12 BLISTER PACK in 1 PACKAGE (61919-282-12) > 1 TABLET in 1 BLISTER PACK (61919-282-01)",
"NDC11Code": "61919-0282-12",
"ProductNDC": "61919-282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluconazole",
"NonProprietaryName": "Fluconazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076077",
"LabelerName": "DIRECT RX",
"SubstanceName": "FLUCONAZOLE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 2C9 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Fluconazole Tablets USP are indicated for the treatment of. 1.Vaginal candidiasis (vaginal yeast infections due to Candida).2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia.3.Cryptococcal meningitis. Before prescribing Fluconazole Tablets USP for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted.Prophylaxis. Fluconazole Tablets USP are also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.",
"Description": "Fluconazole, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole, USP is designated chemically as 2,4-Difluoro-1′,1′-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol and has the following structural formula. Fluconazole, USP is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Tablets USP, for oral administration, contain 50, 100, 150, or 200 mg of fluconazole, USP and have the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, FD&C red #40 aluminum lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and talc."
},
{
"NDCCode": "11673-282-09",
"PackageDescription": "1 KIT in 1 CARTON (11673-282-09) * 12 TABLET, FILM COATED in 1 BLISTER PACK * 8 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "11673-0282-09",
"ProductNDC": "11673-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime Nighttime Sinus Relief",
"NonProprietaryName": "Acetaminophen, Diphenhydramine Hcl, Guaifenesin, Phenylephrine Hcl",
"DosageFormName": "KIT",
"StartMarketingDate": "20240415",
"EndMarketingDate": "20260930",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Target Corporation",
"Status": "Deprecated",
"LastUpdate": "2026-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240415",
"EndMarketingDatePackage": "20260930",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these common cold symptoms: nasal congestionheadacheminor aches and painssinus congestion and pressurecough (Nighttime only)runny nose and sneezing (Nighttime only). temporarily promotes nasal and/or sinus drainage. helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive (Daytime only)."
},
{
"NDCCode": "13537-282-12",
"PackageDescription": "1 TUBE in 1 BOX (13537-282-12) > 4 g in 1 TUBE (13537-282-11)",
"NDC11Code": "13537-0282-12",
"ProductNDC": "13537-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Extreme Moisturizing Spf 16",
"ProprietaryNameSuffix": "(granate Seductor) - Purple",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131216",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".066; .015",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "33342-282-12",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (33342-282-12) / 10 TABLET in 1 BLISTER PACK",
"NDC11Code": "33342-0282-12",
"ProductNDC": "33342-282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241016",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207292",
"LabelerName": "Macleods Pharmaceuticals Limited",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "10; 320",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2026-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241016",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and valsartan tablets, USP are the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure: In patients not adequately controlled on monotherapy (1) As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1). Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.",
"Description": "Amlodipine and valsartan tablets, USP are a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: Its molecular formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is: Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets, USP are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, (6.9 mg or 13.9 mg, equivalent to 5 mg or 10 mg of amlodipine respectively) with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients of all strengths of the tablets are microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Additionally the 5/320 mg and 10/320 mg strengths contain ferric oxide yellow. The film coating contains hypromellose, polyethylene glycol, talc, titanium dioxide, iron oxide yellow. Additionally the 5/320 mg and 10/160 mg contain iron oxide red. Meets USP Dissolution Test 3."
},
{
"NDCCode": "68428-282-12",
"PackageDescription": "600 PELLET in 1 BOTTLE, GLASS (68428-282-12) ",
"NDC11Code": "68428-0282-12",
"ProductNDC": "68428-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Camphora",
"NonProprietaryName": "Camphor (natural)",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100203",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "CAMPHOR (NATURAL)",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2023-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20100203",
"SamplePackage": "N"
},
{
"NDCCode": "61919-008-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-008-12)",
"NDC11Code": "61919-0008-12",
"ProductNDC": "61919-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride Tablet",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091179",
"LabelerName": "Direct Rx",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC],Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Promethazine hydrochloride tablets are useful for:Perennial and seasonal allergic rhinitis.Vasomotor rhinitis.Allergic conjunctivitis due to inhalant allergens and foods.Mild, uncomplicated allergic skin manifestations of urticaria and angioedema.Amelioration of allergic reactions to blood or plasma.Dermographism.Anaphylactic reactions as adjunctive therapy to epinephrine and other standard measures after the acute manifestations have been controlled.Preoperative, postoperative and obstetric sedation.Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery.Therapy adjunctive to meperidine or other analgesics for control of postoperative pain.Sedation in both children and adults as well as relief of apprehension and production of light sleep from which the patient can be easily aroused.Active and prophylactic treatment of motion sickness.Antiemetic therapy in postoperative patients.",
"Description": "Rx only. DESCRIPTION. Promethazine Hydrochloride, a phenothiazine derivative, is designated chemically as 10- [2-(Dimethylamino)propyl]phenothiazine monohydochloride and has the following structural formula. Promethazine hydrochloride is a racemic compound; the empirical formula is C17H20N2S HCl and its molecular weight is 320.88. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol. Each tablet for oral administration contains 12.5 mg, 25 mg or 50 mg promethazine hydrochloride, USP. The inactive ingredients include: lactose anhydrous, magnesium stearate, and microcrystalline cellulose. The 50 mg also contains D&C Red # 27 Lake."
},
{
"NDCCode": "61919-047-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-047-12) ",
"NDC11Code": "61919-0047-12",
"ProductNDC": "61919-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190819",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091179",
"LabelerName": "Direct_Rx",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20190819",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine Hydrochloride Tablets are useful for: Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions as adjunctive therapy to epinephrine and other standard measures after the acute manifestations have been controlled. Preoperative, postoperative and obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of postoperative pain. Sedation in both children and adults as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10- [2-(Dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. [Structure]. Promethazine hydrochloride is a racemic compound; the empirical formula is C17H20N2S HCl and its molecular weight is 320.88. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol. Each tablet for oral administration contains 12.5 mg, 25 mg or 50 mg promethazine hydrochloride, USP. The inactive ingredients include: lactose anhydrous, magnesium stearate, and microcrystalline cellulose. The 50 mg also contains D&C Red # 27 Lake."
},
{
"NDCCode": "61919-108-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-108-12) ",
"NDC11Code": "61919-0108-12",
"ProductNDC": "61919-108",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190807",
"EndMarketingDate": "20260501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040362",
"LabelerName": "Direct_Rx",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20190807",
"EndMarketingDatePackage": "20260501",
"SamplePackage": "N",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis of osteoarthritis Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic derznatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Allergic conjunctivitis Keratitis Chorioretinitis Optic neuritis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Loeffler’s syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.",
"Description": "Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1, 4-diene-3, 11, 20-trione, 17, 21-dihydroxy-. The structural formula is represented below. [Image]. Molecular weight: 358.44. Prednisone Tablets, USP are available in three strengths: 5 mg, 10 mg, and 20 mg. In addition, each tablet contains the following Inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow #6 aluminum lake HT 15-18%."
},
{
"NDCCode": "61919-184-12",
"PackageDescription": "12 BOTTLE in 1 BOTTLE (61919-184-12) > 10 TABLET in 1 BOTTLE (61919-184-10) ",
"NDC11Code": "61919-0184-12",
"ProductNDC": "61919-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenazopyridine Hydrochloride",
"NonProprietaryName": "Phenazopyridine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Direct Rx",
"SubstanceName": "PHENAZOPYRIDINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150101",
"SamplePackage": "N",
"IndicationAndUsage": "Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).",
"Description": "Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch."
},
{
"NDCCode": "61919-191-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-191-12) ",
"NDC11Code": "61919-0191-12",
"ProductNDC": "61919-191",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Promethazine Hydrochloride",
"NonProprietaryName": "Promethazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083426",
"LabelerName": "DIRECT RX",
"SubstanceName": "PROMETHAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150101",
"SamplePackage": "N",
"IndicationAndUsage": "Promethazine hydrochloride tablets are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.",
"Description": "Promethazine hydrochloride is a racemic compound. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. Each tablet, for oral administration, contains 25 mg or 50 mg of promethazine hydrochloride. In addition each tablet contains the following inactive ingredients: dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and stearic acid. Promethazine Hydrochloride Tablets USP, 50 mg also contain anhydrous lactose."
},
{
"NDCCode": "61919-229-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-229-12) ",
"NDC11Code": "61919-0229-12",
"ProductNDC": "61919-229",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190820",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075964",
"LabelerName": "Direct_Rx",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190820",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia.",
"Description": "Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadolhydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. [Structure]. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP, and are white in color. Inactive ingredients in the tablet are pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, hypromellose and polysorbate 80."
},
{
"NDCCode": "61919-342-12",
"PackageDescription": "12 TABLET in 1 BOTTLE (61919-342-12)",
"NDC11Code": "61919-0342-12",
"ProductNDC": "61919-342",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Prednisone",
"NonProprietaryName": "Prednisone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA083677",
"LabelerName": "DIRECT RX",
"SubstanceName": "PREDNISONE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Prednisone Tablets, USP are indicated in the following conditions. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic DiseasesPemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory DiseasesSymptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic DiseasesFor palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.",
"Description": "Each tablet for oral administration contains:Prednisone.................................................5 mg, 10 mg and 20 mgInactive IngredientsPrednisone Tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc.Prednisone Tablets, USP of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.Prednisone Tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below:C21H26O5 M.W. 358.43Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol."
},
{
"NDCCode": "61919-423-12",
"PackageDescription": "12 CAPSULE in 1 BOTTLE (61919-423-12) ",
"NDC11Code": "61919-0423-12",
"ProductNDC": "61919-423",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loperamide Hydrochloride",
"NonProprietaryName": "Loperamide Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073192",
"LabelerName": "DIRECT RX",
"SubstanceName": "LOPERAMIDE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20150101",
"SamplePackage": "N",
"IndicationAndUsage": "Loperamide hydrochloride capsules are indicated for the control and symptomatic relief of acute nonspecific diarrhea and of chronic diarrhea associated with inflammatory bowel disease. Loperamide hydrochloride capsules are also indicated for reducing the volume of discharge from ileostomies.",
"Description": "Loperamide hydrochloride is a white to slightly yellow powder and is freely soluble in methanol, isopropyl alcohol, chloroform and slightly soluble in water. Loperamide hydrochloride, 4-(p-chlorophenyl)-4-hydroxy-N,N-dimethyl-α,α-diphenyl-1-piperidinebutyramide monohydrochloride, is a synthetic antidiarrheal for oral use. Its structural formula is. Loperamide hydrochloride is available in 2 mg capsules. Each capsule, for oral administration, contains 2 mg loperamide hydrochloride. Loperamide hydrochloride capsules USP also contain the inactive ingredients: dimethylpolysiloxane, gelatin, iron oxide black, iron oxide red, iron oxide yellow, lactose monohydrate, pregelatinized corn starch, magnesium stearate, shellac, and titanium dioxide."
},
{
"NDCCode": "61919-565-12",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE (61919-565-12) ",
"NDC11Code": "61919-0565-12",
"ProductNDC": "61919-565",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20190906",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078539",
"LabelerName": "Direct_Rx",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20190906",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.",
"Description": "The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: [Chemical Structure] The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6."
},
{
"NDCCode": "61919-656-12",
"PackageDescription": "12 TABLET in 1 CARTON (61919-656-12) ",
"NDC11Code": "61919-0656-12",
"ProductNDC": "61919-656",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190422",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202490",
"LabelerName": "DIRECT RX",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190422",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use. Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. Safety and effectiveness of rizatriptan benzoate tablets has not been established for cluster headache.",
"Description": "Rizatriptan benzoate tablets, USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D(5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. [Image]. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.4. Rizatriptan benzoate, USP is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate tablets are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, starch (corn starch), pregelatinized starch ( maize), colloidal silicon dioxide, ferric oxide (red), and magnesium stearate."
},
{
"NDCCode": "0019-0953-10",
"PackageDescription": "12 BOTTLE, GLASS in 1 BOX (0019-0953-10) / 100 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00019-0953-10",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0019-0953-50",
"PackageDescription": "12 BOTTLE, GLASS in 1 BOX (0019-0953-50) / 150 mL in 1 BOTTLE, GLASS",
"NDC11Code": "00019-0953-50",
"ProductNDC": "0019-0953",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Conray",
"NonProprietaryName": "Iothalamate Meglumine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVASCULAR",
"StartMarketingDate": "20031014",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA013295",
"LabelerName": "Liebel-Flarsheim Company LLC",
"SubstanceName": "IOTHALAMATE MEGLUMINE",
"StrengthNumber": "600",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20031014",
"SamplePackage": "N",
"IndicationAndUsage": "Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.",
"Description": "Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen."
},
{
"NDCCode": "0456-1500-55",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (0456-1500-55) / 1 KIT in 1 BLISTER PACK",
"NDC11Code": "00456-1500-55",
"ProductNDC": "0456-1500",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"EndMarketingDate": "20270831",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20090417",
"EndMarketingDatePackage": "20270831",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1510-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1510-60) ",
"NDC11Code": "00456-1510-60",
"ProductNDC": "0456-1510",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1512-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1512-60) ",
"NDC11Code": "00456-1512-60",
"ProductNDC": "0456-1512",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1525-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1525-60) ",
"NDC11Code": "00456-1525-60",
"ProductNDC": "0456-1525",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0456-1550-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (0456-1550-60) ",
"NDC11Code": "00456-1550-60",
"ProductNDC": "0456-1550",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "Allergan, Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090417",
"SamplePackage": "N",
"IndicationAndUsage": "SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "0941-0679-05",
"PackageDescription": "2500 mL in 1 BAG (0941-0679-05) ",
"NDC11Code": "00941-0679-05",
"ProductNDC": "0941-0679",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extraneal",
"NonProprietaryName": "Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "20021220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021321",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "7.5; 535; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021220",
"SamplePackage": "N",
"IndicationAndUsage": "EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].",
"Description": "EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0941-0679-06",
"PackageDescription": "2000 mL in 1 BAG (0941-0679-06) ",
"NDC11Code": "00941-0679-06",
"ProductNDC": "0941-0679",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extraneal",
"NonProprietaryName": "Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "20021220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021321",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "7.5; 535; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021220",
"SamplePackage": "N",
"IndicationAndUsage": "EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].",
"Description": "EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0941-0679-52",
"PackageDescription": "2000 mL in 1 BAG (0941-0679-52) ",
"NDC11Code": "00941-0679-52",
"ProductNDC": "0941-0679",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extraneal",
"NonProprietaryName": "Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "20021220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021321",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "7.5; 535; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021220",
"SamplePackage": "N",
"IndicationAndUsage": "EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].",
"Description": "EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "0941-0679-53",
"PackageDescription": "2500 mL in 1 BAG (0941-0679-53) ",
"NDC11Code": "00941-0679-53",
"ProductNDC": "0941-0679",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Extraneal",
"NonProprietaryName": "Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAPERITONEAL",
"StartMarketingDate": "20021220",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021321",
"LabelerName": "Vantive US Healthcare LLC",
"SubstanceName": "ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE",
"StrengthNumber": "7.5; 535; 448; 25.7; 5.08",
"StrengthUnit": "g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021220",
"SamplePackage": "N",
"IndicationAndUsage": "EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].",
"Description": "EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies."
},
{
"NDCCode": "11090-282-01",
"PackageDescription": "1 TUBE in 1 CARTON (11090-282-01) / 32 mL in 1 TUBE",
"NDC11Code": "11090-0282-01",
"ProductNDC": "11090-282",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Deep",
"NonProprietaryName": "Octocrylene, Homosalate, Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220318",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Beauty Manufacturing Solutions Corp.",
"SubstanceName": "HOMOSALATE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "83; 45; 56",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20220318",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "14290-282-20",
"PackageDescription": "1 TUBE in 1 CARTON (14290-282-20) > 20 g in 1 TUBE",
"NDC11Code": "14290-0282-20",
"ProductNDC": "14290-282",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090310",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA075265",
"LabelerName": "Triax Pharmaceuticals, LLC",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC],Retinoids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02",
"IndicationAndUsage": "Tretinoin gel and cream are indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Gel, USP and Tretinoin Cream, USP are used for the topical treatment of acne vulgaris. Each gram of tretinoin gel contains tretinoin in either of two strengths, 0.025% (0.25 mg) or 0.01% (0.1 mg) in a gel vehicle of hydroxypropyl cellulose, butylated hydroxytoluene, and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Each gram of tretinoin cream contains tretinoin in either of three strengths, 0.1% (1 mg), 0.05% (0.5 mg), or 0.025% (0.25 mg) in a hydrophilic cream vehicle of: stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid. It has a molecular weight of 300.44 and has the following structural formula:."
},
{
"NDCCode": "16590-845-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16590-845-30)",
"NDC11Code": "16590-0845-30",
"ProductNDC": "16590-845",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Savella is indicated for the management of fibromyalgia. Savella is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. Savella is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. Additionally, the following inactive ingredients are also present as components of the film coat. 12.5 mg. FD&C Red #40 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide. 25 mg. Hypromellose, polyethylene glycol, titanium dioxide. 50 mg. FD&C Blue #1, Blue #2, and Yellow #5 Aluminum Lake dyes; hypromellose; polyethylene glycol; titanium dioxide. 100 mg. FD&C Blue #1 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide."
},
{
"NDCCode": "16590-845-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16590-845-60)",
"NDC11Code": "16590-0845-60",
"ProductNDC": "16590-845",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Savella",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090417",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022256",
"LabelerName": "STAT RX USA LLC",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Savella is indicated for the management of fibromyalgia. Savella is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].",
"Description": "Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. Savella is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. Additionally, the following inactive ingredients are also present as components of the film coat. 12.5 mg. FD&C Red #40 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide. 25 mg. Hypromellose, polyethylene glycol, titanium dioxide. 50 mg. FD&C Blue #1, Blue #2, and Yellow #5 Aluminum Lake dyes; hypromellose; polyethylene glycol; titanium dioxide. 100 mg. FD&C Blue #1 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>61919-282-12</NDCCode>
<PackageDescription>12 BLISTER PACK in 1 PACKAGE (61919-282-12) > 1 TABLET in 1 BLISTER PACK (61919-282-01)</PackageDescription>
<NDC11Code>61919-0282-12</NDC11Code>
<ProductNDC>61919-282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluconazole</ProprietaryName>
<NonProprietaryName>Fluconazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076077</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>FLUCONAZOLE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Azole Antifungal [EPC],Azoles [CS],Cytochrome P450 2C19 Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 2C9 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Fluconazole Tablets USP are indicated for the treatment of. 1.Vaginal candidiasis (vaginal yeast infections due to Candida).2.Oropharyngeal and esophageal candidiasis. In open noncomparative studies of relatively small numbers of patients, fluconazole was also effective for the treatment of Candida urinary tract infections, peritonitis, and systemic Candida infections including candidemia, disseminated candidiasis, and pneumonia.3.Cryptococcal meningitis. Before prescribing Fluconazole Tablets USP for AIDS patients with cryptococcal meningitis, please see CLINICAL STUDIES section. Studies comparing fluconazole to amphotericin B in non-HIV infected patients have not been conducted.Prophylaxis. Fluconazole Tablets USP are also indicated to decrease the incidence of candidiasis in patients undergoing bone marrow transplantation who receive cytotoxic chemotherapy and/or radiation therapy. Specimens for fungal culture and other relevant laboratory studies (serology, histopathology) should be obtained prior to therapy to isolate and identify causative organisms. Therapy may be instituted before the results of the cultures and other laboratory studies are known; however, once these results become available, anti-infective therapy should be adjusted accordingly.</IndicationAndUsage>
<Description>Fluconazole, USP, the first of a new subclass of synthetic triazole antifungal agents, is available as tablets for oral administration. Fluconazole, USP is designated chemically as 2,4-Difluoro-1′,1′-bis(1H-1,2,4-triazol-1-ylmethyl) benzyl alcohol and has the following structural formula. Fluconazole, USP is a white crystalline solid which is slightly soluble in water and saline. Fluconazole Tablets USP, for oral administration, contain 50, 100, 150, or 200 mg of fluconazole, USP and have the following inactive ingredients: colloidal silicon dioxide, corn starch, croscarmellose sodium, FD&C red #40 aluminum lake, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and talc.</Description>
</NDC>
<NDC>
<NDCCode>11673-282-09</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (11673-282-09) * 12 TABLET, FILM COATED in 1 BLISTER PACK * 8 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>11673-0282-09</NDC11Code>
<ProductNDC>11673-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime Nighttime Sinus Relief</ProprietaryName>
<NonProprietaryName>Acetaminophen, Diphenhydramine Hcl, Guaifenesin, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240415</StartMarketingDate>
<EndMarketingDate>20260930</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2026-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240415</StartMarketingDatePackage>
<EndMarketingDatePackage>20260930</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these common cold symptoms: nasal congestionheadacheminor aches and painssinus congestion and pressurecough (Nighttime only)runny nose and sneezing (Nighttime only). temporarily promotes nasal and/or sinus drainage. helps loosen phlegm (mucus) and thin bronchial secretions to rid the bronchial passageways of bothersome mucus and make coughs more productive (Daytime only).</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13537-282-12</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-282-12) > 4 g in 1 TUBE (13537-282-11)</PackageDescription>
<NDC11Code>13537-0282-12</NDC11Code>
<ProductNDC>13537-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Extreme Moisturizing Spf 16</ProprietaryName>
<ProprietaryNameSuffix>(granate Seductor) - Purple</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131216</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.066; .015</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>33342-282-12</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (33342-282-12) / 10 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>33342-0282-12</NDC11Code>
<ProductNDC>33342-282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241016</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207292</ApplicationNumber>
<LabelerName>Macleods Pharmaceuticals Limited</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 320</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and valsartan tablets, USP are the combination tablet of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and valsartan tablets, USP are indicated for the treatment of hypertension, to lower blood pressure: In patients not adequately controlled on monotherapy (1) As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1). Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions.</IndicationAndUsage>
<Description>Amlodipine and valsartan tablets, USP are a fixed combination of amlodipine and valsartan. Amlodipine and valsartan tablets, USP contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to pale yellow crystalline powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: Its molecular formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to practically white fine powder, soluble in ethanol and methanol and slightly soluble in water. Valsartan’s chemical name is N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl) [1,1’-biphenyl]-4-yl]methyl]-L-valine; its structural formula is: Its molecular formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and valsartan tablets, USP are formulated in 4 strengths for oral administration with a combination of amlodipine besylate, (6.9 mg or 13.9 mg, equivalent to 5 mg or 10 mg of amlodipine respectively) with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients of all strengths of the tablets are microcrystalline cellulose, crospovidone, colloidal silicon dioxide, magnesium stearate. Additionally the 5/320 mg and 10/320 mg strengths contain ferric oxide yellow. The film coating contains hypromellose, polyethylene glycol, talc, titanium dioxide, iron oxide yellow. Additionally the 5/320 mg and 10/160 mg contain iron oxide red. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>68428-282-12</NDCCode>
<PackageDescription>600 PELLET in 1 BOTTLE, GLASS (68428-282-12) </PackageDescription>
<NDC11Code>68428-0282-12</NDC11Code>
<ProductNDC>68428-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Camphora</ProprietaryName>
<NonProprietaryName>Camphor (natural)</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100203</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>CAMPHOR (NATURAL)</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100203</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>61919-008-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-008-12)</PackageDescription>
<NDC11Code>61919-0008-12</NDC11Code>
<ProductNDC>61919-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride Tablet</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091179</ApplicationNumber>
<LabelerName>Direct Rx</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC],Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Promethazine hydrochloride tablets are useful for:Perennial and seasonal allergic rhinitis.Vasomotor rhinitis.Allergic conjunctivitis due to inhalant allergens and foods.Mild, uncomplicated allergic skin manifestations of urticaria and angioedema.Amelioration of allergic reactions to blood or plasma.Dermographism.Anaphylactic reactions as adjunctive therapy to epinephrine and other standard measures after the acute manifestations have been controlled.Preoperative, postoperative and obstetric sedation.Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery.Therapy adjunctive to meperidine or other analgesics for control of postoperative pain.Sedation in both children and adults as well as relief of apprehension and production of light sleep from which the patient can be easily aroused.Active and prophylactic treatment of motion sickness.Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Rx only. DESCRIPTION. Promethazine Hydrochloride, a phenothiazine derivative, is designated chemically as 10- [2-(Dimethylamino)propyl]phenothiazine monohydochloride and has the following structural formula. Promethazine hydrochloride is a racemic compound; the empirical formula is C17H20N2S HCl and its molecular weight is 320.88. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol. Each tablet for oral administration contains 12.5 mg, 25 mg or 50 mg promethazine hydrochloride, USP. The inactive ingredients include: lactose anhydrous, magnesium stearate, and microcrystalline cellulose. The 50 mg also contains D&C Red # 27 Lake.</Description>
</NDC>
<NDC>
<NDCCode>61919-047-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-047-12) </PackageDescription>
<NDC11Code>61919-0047-12</NDC11Code>
<ProductNDC>61919-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190819</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091179</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190819</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine Hydrochloride Tablets are useful for: Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions as adjunctive therapy to epinephrine and other standard measures after the acute manifestations have been controlled. Preoperative, postoperative and obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of postoperative pain. Sedation in both children and adults as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10- [2-(Dimethylamino)propyl]phenothiazine monohydrochloride and has the following structural formula. [Structure]. Promethazine hydrochloride is a racemic compound; the empirical formula is C17H20N2S HCl and its molecular weight is 320.88. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is freely soluble in water and soluble in alcohol. Each tablet for oral administration contains 12.5 mg, 25 mg or 50 mg promethazine hydrochloride, USP. The inactive ingredients include: lactose anhydrous, magnesium stearate, and microcrystalline cellulose. The 50 mg also contains D&C Red # 27 Lake.</Description>
</NDC>
<NDC>
<NDCCode>61919-108-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-108-12) </PackageDescription>
<NDC11Code>61919-0108-12</NDC11Code>
<ProductNDC>61919-108</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190807</StartMarketingDate>
<EndMarketingDate>20260501</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040362</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20190807</StartMarketingDatePackage>
<EndMarketingDatePackage>20260501</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Psoriatic arthritis Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Acute nonspecific tenosynovitis Acute gouty arthritis Post-traumatic osteoarthritis Synovitis of osteoarthritis Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic derznatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Pemphigus Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Exfoliative dermatitis Mycosis fungoides Severe psoriasis Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Bronchial asthma Contact dermatitis Atopic dermatitis Serum sickness Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Allergic conjunctivitis Keratitis Chorioretinitis Optic neuritis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Loeffler’s syndrome not manageable by other means Berylliosis Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy. Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or, impending block when used concurrently with appropriate antituberculous chemotherapy Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Prednisone is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, in chloroform, in dioxane, and in methanol. The chemical name for prednisone is pregna-1, 4-diene-3, 11, 20-trione, 17, 21-dihydroxy-. The structural formula is represented below. [Image]. Molecular weight: 358.44. Prednisone Tablets, USP are available in three strengths: 5 mg, 10 mg, and 20 mg. In addition, each tablet contains the following Inactive Ingredients: Lactose Monohydrate, Magnesium Stearate, Pregelatinized Starch, Sodium Lauryl Sulfate and Sodium Starch Glycolate. Also Prednisone Tablets USP, 20 mg contains FD & C yellow #6 aluminum lake HT 15-18%.</Description>
</NDC>
<NDC>
<NDCCode>61919-184-12</NDCCode>
<PackageDescription>12 BOTTLE in 1 BOTTLE (61919-184-12) > 10 TABLET in 1 BOTTLE (61919-184-10) </PackageDescription>
<NDC11Code>61919-0184-12</NDC11Code>
<ProductNDC>61919-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenazopyridine Hydrochloride</ProprietaryName>
<NonProprietaryName>Phenazopyridine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Direct Rx</LabelerName>
<SubstanceName>PHENAZOPYRIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Phenazopyridine HCl is indicated for the symptomatic relief of pain, burning, urgency, frequency, and other discomforts arising from irritation of the lower urinary tract mucosa caused by infection, trauma, surgery, endoscopic procedures, or the passage of sounds or catheters. The use of Phenazopyridine HCl for relief of symptoms should not delay definitive diagnosis and treatment of causative conditions. Because it provides only symptomatic relief, prompt appropriate treatment of the cause of pain must be instituted and Phenazopyridine HCl should be discontinued when symptoms are controlled. The analgesic action may reduce or eliminate the need for systemic analgesics or narcotics. It is, however, compatible with antibacterial therapy and can help to relieve pain and discomfort during the interval before antibacterial therapy controls the infection. Treatment of a urinary tract infection with Phenazopyridine HCl should not exceed 2 days because there is a lack of evidence that the combined administration of Phenazopyridine HCl and an antibacterial provides greater benefit than administration of the antibacterial alone after 2 days. (See DOSAGE AND ADMINISTRATION section.).</IndicationAndUsage>
<Description>Phenazopyridine Hydrochloride is light or dark red to dark violet, odorless, slightly bitter, crystalline powder. It has a specific local analgesic effect in the urinary tract, promptly relieving burning and pain. It has the following structural formula. Phenazopyridine HCl tablets contain the following inactive ingredients: carnauba wax, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, povidone, pregelatinized starch.</Description>
</NDC>
<NDC>
<NDCCode>61919-191-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-191-12) </PackageDescription>
<NDC11Code>61919-0191-12</NDC11Code>
<ProductNDC>61919-191</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Promethazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Promethazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083426</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>PROMETHAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Promethazine hydrochloride tablets are useful for. Perennial and seasonal allergic rhinitis. Vasomotor rhinitis. Allergic conjunctivitis due to inhalant allergens and foods. Mild, uncomplicated allergic skin manifestations of urticaria and angioedema. Amelioration of allergic reactions to blood or plasma. Dermographism. Anaphylactic reactions, as adjunctive therapy to epinephrine and other standard measures, after the acute manifestations have been controlled. Preoperative, postoperative, or obstetric sedation. Prevention and control of nausea and vomiting associated with certain types of anesthesia and surgery. Therapy adjunctive to meperidine or other analgesics for control of post-operative pain. Sedation in both children and adults, as well as relief of apprehension and production of light sleep from which the patient can be easily aroused. Active and prophylactic treatment of motion sickness. Antiemetic therapy in postoperative patients.</IndicationAndUsage>
<Description>Promethazine hydrochloride is a racemic compound. Promethazine hydrochloride, a phenothiazine derivative, is designated chemically as 10 H-Phenothiazine-10-ethanamine, N, N,α-trimethyl-, monohydrochloride, (±)- with the following structural formula. Promethazine hydrochloride occurs as a white to faint yellow, practically odorless, crystalline powder which slowly oxidizes and turns blue on prolonged exposure to air. It is soluble in water and freely soluble in alcohol. Each tablet, for oral administration, contains 25 mg or 50 mg of promethazine hydrochloride. In addition each tablet contains the following inactive ingredients: dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate and stearic acid. Promethazine Hydrochloride Tablets USP, 50 mg also contain anhydrous lactose.</Description>
</NDC>
<NDC>
<NDCCode>61919-229-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-229-12) </PackageDescription>
<NDC11Code>61919-0229-12</NDC11Code>
<ProductNDC>61919-229</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190820</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075964</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190820</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadolhydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. [Structure]. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP, and are white in color. Inactive ingredients in the tablet are pregelatinized starch, lactose anhydrous, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, titanium dioxide, hypromellose and polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>61919-342-12</NDCCode>
<PackageDescription>12 TABLET in 1 BOTTLE (61919-342-12)</PackageDescription>
<NDC11Code>61919-0342-12</NDC11Code>
<ProductNDC>61919-342</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Prednisone</ProprietaryName>
<NonProprietaryName>Prednisone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA083677</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>PREDNISONE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Prednisone Tablets, USP are indicated in the following conditions. Endocrine DisordersPrimary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance); congenital adrenal hyperplasia; hypercalcemia associated with cancer; nonsuppurative thyroiditis. Rheumatic DisordersAs adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in: psoriatic arthritis, rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy), ankylosing spondylitis, acute and subacute bursitis, acute nonspecific tenosynovitis, acute gouty arthritis, post-traumatic osteoarthritis, synovitis of osteoarthritis, epicondylitis. Collagen DiseasesDuring an exacerbation or as maintenance therapy in selected cases of: systemic lupus erythematosus, systemic dermatomyositis (polymyositis), acute rheumatic carditis. Dermatologic DiseasesPemphigus; bullous dermatitis herpetiformis; severe erythema multiforme (Stevens-Johnson syndrome); exfoliative dermatitis; mycosis fungoides; severe psoriasis; severe seborrheic dermatitis. Allergic StatesControl of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment: seasonal or perennial allergic rhinitis; bronchial asthma; contact dermatitis; atopic dermatitis; serum sickness; drug hypersensitivity reactions. Ophthalmic DiseasesSevere acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as: allergic corneal marginal ulcers, herpes zoster ophthalmicus, anterior segment inflammation, diffuse posterior uveitis and choroiditis, sympathetic ophthalmia, allergic conjunctivitis, keratitis, chorioretinitis, optic neuritis, iritis and iridocyclitis. Respiratory DiseasesSymptomatic sarcoidosis; Loeffler’s syndrome not manageable by other means; berylliosis; fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy; aspiration pneumonitis. Hematologic DisordersIdiopathic thrombocytopenic purpura in adults; secondary thrombocytopenia in adults; acquired (autoimmune) hemolytic anemia; erythroblastopenia (RBC anemia); congenital (erythroid) hypoplastic anemia. Neoplastic DiseasesFor palliative management of: leukemias and lymphomas in adults, acute leukemia of childhood. Edematous StatesTo induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. Gastrointestinal DiseasesTo tide the patient over a critical period of the disease in: ulcerative colitis, regional enteritis. MiscellaneousTuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy; trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Each tablet for oral administration contains:Prednisone.................................................5 mg, 10 mg and 20 mgInactive IngredientsPrednisone Tablets, USP of 5 mg and 10 mg strengths contain anhydrous lactose, colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, and talc.Prednisone Tablets, USP of 20 mg strength contain anhydrous lactose, D&C Yellow No. 10 Aluminum Lake, FD&C Yellow No. 6 Aluminum Lake, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.Prednisone Tablets, USP contain prednisone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. The chemical name for prednisone is pregna-1,4-diene-3,11,20-trione monohydrate,17,21-dihydroxy-. The structural formula is represented below:C21H26O5 M.W. 358.43Prednisone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water; slightly soluble in alcohol, chloroform, dioxane, and methanol.</Description>
</NDC>
<NDC>
<NDCCode>61919-423-12</NDCCode>
<PackageDescription>12 CAPSULE in 1 BOTTLE (61919-423-12) </PackageDescription>
<NDC11Code>61919-0423-12</NDC11Code>
<ProductNDC>61919-423</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loperamide Hydrochloride</ProprietaryName>
<NonProprietaryName>Loperamide Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073192</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>LOPERAMIDE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loperamide hydrochloride capsules are indicated for the control and symptomatic relief of acute nonspecific diarrhea and of chronic diarrhea associated with inflammatory bowel disease. Loperamide hydrochloride capsules are also indicated for reducing the volume of discharge from ileostomies.</IndicationAndUsage>
<Description>Loperamide hydrochloride is a white to slightly yellow powder and is freely soluble in methanol, isopropyl alcohol, chloroform and slightly soluble in water. Loperamide hydrochloride, 4-(p-chlorophenyl)-4-hydroxy-N,N-dimethyl-α,α-diphenyl-1-piperidinebutyramide monohydrochloride, is a synthetic antidiarrheal for oral use. Its structural formula is. Loperamide hydrochloride is available in 2 mg capsules. Each capsule, for oral administration, contains 2 mg loperamide hydrochloride. Loperamide hydrochloride capsules USP also contain the inactive ingredients: dimethylpolysiloxane, gelatin, iron oxide black, iron oxide red, iron oxide yellow, lactose monohydrate, pregelatinized corn starch, magnesium stearate, shellac, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>61919-565-12</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (61919-565-12) </PackageDescription>
<NDC11Code>61919-0565-12</NDC11Code>
<ProductNDC>61919-565</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190906</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078539</ApplicationNumber>
<LabelerName>Direct_Rx</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190906</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with. highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m2 initial and repeat courses of moderately emetogenic cancer chemotherapy radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen. Ondansetron tablets are also indicated for the prevention of postoperative nausea and/or vomiting.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets, USP is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula: [Chemical Structure] The molecular formula is C18H19N3OHCl2H2O, representing a molecular weight of 365.9. Ondansetron hydrochloride USP (dihydrate) is a white to off-white powder that is soluble in water and normal saline. Ondansetron tablets, USP for oral administration contain ondansetron hydrochloride USP (dihydrate) equivalent to 4 mg or 8 mg or 24 mg of ondansetron. Each film-coated tablet also contains the inactive ingredients anhydrous lactose, microcrystalline cellulose, pregelatinized starch (maize), magnesium stearate, triacetin, titanium dioxide and hypromellose. In addition 8 mg tablet also contains iron oxide yellow and 24 mg tablet also contains iron oxide red. Meets USP dissolution test 6.</Description>
</NDC>
<NDC>
<NDCCode>61919-656-12</NDCCode>
<PackageDescription>12 TABLET in 1 CARTON (61919-656-12) </PackageDescription>
<NDC11Code>61919-0656-12</NDC11Code>
<ProductNDC>61919-656</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190422</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202490</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190422</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old. Limitations of Use. Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks. Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. Safety and effectiveness of rizatriptan benzoate tablets has not been established for cluster headache.</IndicationAndUsage>
<Description>Rizatriptan benzoate tablets, USP contain rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D(5-HT1B/1D) receptor agonist. Rizatriptan benzoate, USP is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. [Image]. Its molecular formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.4. Rizatriptan benzoate, USP is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C. Rizatriptan benzoate tablets are available for oral administration in strengths of 5 mg and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, starch (corn starch), pregelatinized starch ( maize), colloidal silicon dioxide, ferric oxide (red), and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>0019-0953-10</NDCCode>
<PackageDescription>12 BOTTLE, GLASS in 1 BOX (0019-0953-10) / 100 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00019-0953-10</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0019-0953-50</NDCCode>
<PackageDescription>12 BOTTLE, GLASS in 1 BOX (0019-0953-50) / 150 mL in 1 BOTTLE, GLASS</PackageDescription>
<NDC11Code>00019-0953-50</NDC11Code>
<ProductNDC>0019-0953</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Conray</ProprietaryName>
<NonProprietaryName>Iothalamate Meglumine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVASCULAR</RouteName>
<StartMarketingDate>20031014</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA013295</ApplicationNumber>
<LabelerName>Liebel-Flarsheim Company LLC</LabelerName>
<SubstanceName>IOTHALAMATE MEGLUMINE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20031014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Conray is indicated for use in excretory urography, cerebral angiography, peripheral arteriography, venography, arthrography, direct cholangiography, endoscopic retrograde cholangiopancreatography, contrast enhancement of computed tomographic brain images, cranial computerized angiotomography, intravenous digital subtraction angiography and arterial digital subtraction angiography. Conray may also be used for enhancement of computed tomographic scans performed for detection and evaluation of lesions in the liver, pancreas, kidneys, abdominal aorta, mediastinum, abdominal cavity and retroperitoneal space. Continuous or multiple scans separated by intervals of 1 to 3 seconds during the first 30 to 90 seconds post-injection of the contrast medium (dynamic CT scanning) may provide enhancement of diagnostic significance, and may be of benefit in establishing diagnoses of certain lesions in these sites with greater assurance than is possible with CT alone, and in supplying additional features of the lesions. In other cases, the contrast agent may allow visualization of lesions not seen with CT alone, or may help to define suspicious lesions seen with unenhanced CT (see CLINICAL PHARMACOLOGY). Subsets of patients in whom delayed body CT scans might be helpful have not been identified. Inconsistent results have been reported and abnormal and normal tissues may be isodense during the time frame used for delayed CT scanning. The risks of such indiscriminate use of contrast media are well known and such use is not recommended. At present, consistent results have been documented using dynamic CT techniques only.</IndicationAndUsage>
<Description>Conray is a sterile aqueous solution intended for use as a diagnostic radiopaque medium. Conray contains 60% w/v iothalamate meglumine, which is 1-deoxy-1-(methylamino)-D-glucitol 5-acetamido-2,4,6 triiodo-N-methylisophthalamate (salt), and has the following structural formula:. Each milliliter contains 600 mg of iothalamate meglumine, 0.09 mg edetate calcium disodium as a stabilizer and 0.125 mg of monobasic sodium phosphate as a buffer. The solution provides 28.2% (282 mg/mL) organically bound iodine. Conray has an osmolarity of approximately 1000 mOsmol per liter, an osmolality of approximately 1400 mOsmol per kilogram and is, therefore, hypertonic under conditions of use. The viscosity (cps) is approximately 6 at 25°C and 4 at 37°C. The pH is 6.5 to 7.7. Conray is a clear solution containing no undissolved solids. Crystallization does not occur at normal room temperatures. It is supplied in containers from which the air has been displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>0456-1500-55</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (0456-1500-55) / 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00456-1500-55</NDC11Code>
<ProductNDC>0456-1500</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<EndMarketingDate>20270831</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<EndMarketingDatePackage>20270831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1510-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1510-60) </PackageDescription>
<NDC11Code>00456-1510-60</NDC11Code>
<ProductNDC>0456-1510</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1512-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1512-60) </PackageDescription>
<NDC11Code>00456-1512-60</NDC11Code>
<ProductNDC>0456-1512</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1525-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1525-60) </PackageDescription>
<NDC11Code>00456-1525-60</NDC11Code>
<ProductNDC>0456-1525</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0456-1550-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0456-1550-60) </PackageDescription>
<NDC11Code>00456-1550-60</NDC11Code>
<ProductNDC>0456-1550</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>Allergan, Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA], Serotonin Uptake Inhibitors [MoA], Serotonin and Norepinephrine Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090417</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SAVELLA is indicated for the management of fibromyalgia. SAVELLA is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. SAVELLA is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. The film coat contains the following additional inactive ingredients. 12.5 mg. FD&C Blue #2 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide. 25 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 50 mg. Polyvinyl alcohol, polyethylene glycol, titanium dioxide. 100 mg. FD&C Red #40 Aluminum Lake, polyvinyl alcohol, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0941-0679-05</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0679-05) </PackageDescription>
<NDC11Code>00941-0679-05</NDC11Code>
<ProductNDC>0941-0679</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extraneal</ProprietaryName>
<NonProprietaryName>Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>20021220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021321</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>7.5; 535; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].</IndicationAndUsage>
<Description>EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0679-06</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0941-0679-06) </PackageDescription>
<NDC11Code>00941-0679-06</NDC11Code>
<ProductNDC>0941-0679</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extraneal</ProprietaryName>
<NonProprietaryName>Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>20021220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021321</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>7.5; 535; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].</IndicationAndUsage>
<Description>EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0679-52</NDCCode>
<PackageDescription>2000 mL in 1 BAG (0941-0679-52) </PackageDescription>
<NDC11Code>00941-0679-52</NDC11Code>
<ProductNDC>0941-0679</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extraneal</ProprietaryName>
<NonProprietaryName>Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>20021220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021321</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>7.5; 535; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].</IndicationAndUsage>
<Description>EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>0941-0679-53</NDCCode>
<PackageDescription>2500 mL in 1 BAG (0941-0679-53) </PackageDescription>
<NDC11Code>00941-0679-53</NDC11Code>
<ProductNDC>0941-0679</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Extraneal</ProprietaryName>
<NonProprietaryName>Icodextrin, Sodium Chloride, Sodium Lactate, Calcium Chloride, Magnesium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAPERITONEAL</RouteName>
<StartMarketingDate>20021220</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021321</ApplicationNumber>
<LabelerName>Vantive US Healthcare LLC</LabelerName>
<SubstanceName>ICODEXTRIN; SODIUM CHLORIDE; SODIUM LACTATE; CALCIUM CHLORIDE; MAGNESIUM CHLORIDE</SubstanceName>
<StrengthNumber>7.5; 535; 448; 25.7; 5.08</StrengthNumber>
<StrengthUnit>g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EXTRANEAL (icodextrin) is indicated for a single daily exchange for the long (8- to 16- hour) dwell during continuous ambulatory peritoneal dialysis (CAPD) or automated peritoneal dialysis (APD) for the management of kidney failure in patients requiring long-term kidney replacement therapy. EXTRANEAL is also indicated to improve (compared to 4.25% dextrose) long-dwell ultrafiltration and clearance of creatinine and urea nitrogen in patients with high average or greater transport characteristics, as defined using the peritoneal equilibration test (PET) [see Clinical Pharmacology (12), Clinical Studies (14)].</IndicationAndUsage>
<Description>EXTRANEAL (icodextrin) Peritoneal Dialysis Solution is a solution intended for intraperitoneal administration that contains the colloid osmotic agent icodextrin. Icodextrin is a cornstarch-derived, water-soluble glucose polymer linked by alpha (1-4) and less than 10% alpha (1-6) glucosidic bonds with a weight-average molecular weight between 13,000 and 19,000 Daltons and a number average molecular weight between 5,000 and 6,500 Daltons. The representative structural formula of icodextrin is. Each 100 mL of EXTRANEAL contains. Electrolyte content per liter. Water for Injection, USP qs. HCl/NaOH may have been used to adjust pH. EXTRANEAL contains no bacteriostatic or antimicrobial agents. Calculated osmolarity: 282-286 mOsm/L; pH=5.0-6.0. EXTRANEAL is a sterile, nonpyrogenic, clear solution packaged in AMBU-FLEX II and ULTRABAG containers. The container systems are composed of polyvinyl chloride. Solutions in contact with the plastic container can leach out certain of its chemical components in very small amounts within the expiration period, e.g., di-2-ethylhexyl phthalate (DEHP), up to 5 parts per million; however, the safety of the plastic has been confirmed in tests in animals according to USP biological tests for plastic containers as well as by tissue culture toxicity studies.</Description>
</NDC>
<NDC>
<NDCCode>11090-282-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11090-282-01) / 32 mL in 1 TUBE</PackageDescription>
<NDC11Code>11090-0282-01</NDC11Code>
<ProductNDC>11090-282</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>It Cosmetics Your Skin But Better Cc Plus Nude Glow Color Correcting Medium Coverage Skin Tint Brightening Glow Serum Broad Spectrum Spf 40 Sunscreen - Deep</ProprietaryName>
<NonProprietaryName>Octocrylene, Homosalate, Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220318</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Beauty Manufacturing Solutions Corp.</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>83; 45; 56</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220318</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14290-282-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (14290-282-20) > 20 g in 1 TUBE</PackageDescription>
<NDC11Code>14290-0282-20</NDC11Code>
<ProductNDC>14290-282</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090310</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA075265</ApplicationNumber>
<LabelerName>Triax Pharmaceuticals, LLC</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC],Retinoids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
<IndicationAndUsage>Tretinoin gel and cream are indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Gel, USP and Tretinoin Cream, USP are used for the topical treatment of acne vulgaris. Each gram of tretinoin gel contains tretinoin in either of two strengths, 0.025% (0.25 mg) or 0.01% (0.1 mg) in a gel vehicle of hydroxypropyl cellulose, butylated hydroxytoluene, and alcohol (denatured with tert-butyl alcohol and brucine sulfate) 90% w/w. Each gram of tretinoin cream contains tretinoin in either of three strengths, 0.1% (1 mg), 0.05% (0.5 mg), or 0.025% (0.25 mg) in a hydrophilic cream vehicle of: stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid. It has a molecular weight of 300.44 and has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>16590-845-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16590-845-30)</PackageDescription>
<NDC11Code>16590-0845-30</NDC11Code>
<ProductNDC>16590-845</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Savella is indicated for the management of fibromyalgia. Savella is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. Savella is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. Additionally, the following inactive ingredients are also present as components of the film coat. 12.5 mg. FD&C Red #40 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide. 25 mg. Hypromellose, polyethylene glycol, titanium dioxide. 50 mg. FD&C Blue #1, Blue #2, and Yellow #5 Aluminum Lake dyes; hypromellose; polyethylene glycol; titanium dioxide. 100 mg. FD&C Blue #1 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16590-845-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16590-845-60)</PackageDescription>
<NDC11Code>16590-0845-60</NDC11Code>
<ProductNDC>16590-845</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Savella</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090417</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022256</ApplicationNumber>
<LabelerName>STAT RX USA LLC</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Savella is indicated for the management of fibromyalgia. Savella is not approved for use in pediatric patients [see Use in Specific Populations (8.4)].</IndicationAndUsage>
<Description>Milnacipran hydrochloride is a selective norepinephrine and serotonin reuptake inhibitor; it inhibits norepinephrine uptake with greater potency than serotonin. It is a racemic mixture with the chemical name: (±)-[1R(S),2S(R)]-2-(aminomethyl)-N,N-diethyl-1-phenylcyclopropanecarboxamide hydrochloride. The structural formula is. Milnacipran hydrochloride is a white to off-white crystalline powder with a melting point of 179°C. It is freely soluble in water, methanol, ethanol, chloroform, and methylene chloride and sparingly soluble in diethyl ether. It has an empirical formula of C15H23ClN2O and a molecular weight of 282.8 g/mol. Savella is available for oral administration as film-coated tablets containing 12.5 mg, 25 mg, 50 mg, and 100 mg milnacipran hydrochloride. Each tablet also contains dibasic calcium phosphate, povidone, carboxymethylcellulose calcium, colloidal silicon dioxide, magnesium stearate, and talc as inactive ingredients. Additionally, the following inactive ingredients are also present as components of the film coat. 12.5 mg. FD&C Red #40 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide. 25 mg. Hypromellose, polyethylene glycol, titanium dioxide. 50 mg. FD&C Blue #1, Blue #2, and Yellow #5 Aluminum Lake dyes; hypromellose; polyethylene glycol; titanium dioxide. 100 mg. FD&C Blue #1 Aluminum Lake dye, hypromellose, polyethylene glycol, titanium dioxide.</Description>
</NDC>
</NDCList>