RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>61919-530-35</NDCCode>
    <PackageDescription>35 TABLET in 1 BOTTLE (61919-530-35) </PackageDescription>
    <NDC11Code>61919-0530-35</NDC11Code>
    <ProductNDC>61919-530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203834</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>ACYCLOVIR</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200122</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
    <Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&amp;C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C8H11N5O3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:. Mechanism of Antiviral Action: Acyclovir is a synthetic purine nucleoside analogue with in vitro and in vivo inhibitory activity against herpes simplex virus types 1 (HSV-1), 2 (HSV-2), and varicella-zoster virus (VZV). The inhibitory activity of acyclovir is highly selective due to its affinity for the enzyme thymidine kinase (TK) encoded by HSV and VZV. This viral enzyme converts acyclovir into acyclovir monophosphate, a nucleotide analogue. The monophosphate is further converted into diphosphate by cellular guanylate kinase and into triphosphate by a number of cellular enzymes. In vitro, acyclovir triphosphate stops replication of herpes viral DNA. This is accomplished in 3 ways: 1) competitive inhibition of viral DNA polymerase, 2) incorporation into and termination of the growing viral DNA chain, and 3) inactivation of the viral DNA polymerase. The greater antiviral activity of acyclovir against HSV compared with VZV is due to its more efficient phosphorylation by the viral TK. Antiviral Activities: The quantitative relationship between the in vitro susceptibility of herpes viruses to antivirals and the clinical response to therapy has not been established in humans, and virus sensitivity testing has not been standardized. Sensitivity testing results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (IC50), vary greatly depending upon a number of factors. Using plaque-reduction assays, the IC50 against herpes simplex virus isolates ranges from 0.02 to 13.5 mcg/mL for HSV-1 and from 0.01 to 9.9 mcg/mL for HSV-2. The IC50 for acyclovir against most laboratory strains and clinical isolates of VZV ranges from 0.12 to 10.8 mcg/mL. Acyclovir also demonstrates activity against the Oka vaccine strain of VZV with a mean IC50 of 1.35 mcg/mL. Drug Resistance: Resistance of HSV and VZV to acyclovir can result from qualitative and quantitative changes in the viral TK and/or DNA polymerase. Clinical isolates of HSV and VZV with reduced susceptibility to acyclovir have been recovered from immunocompromised patients, especially with advanced HIV infection. While most of the acyclovir-resistant mutants isolated thus far from immunocompromised patients have been found to be TK-deficient mutants, other mutants involving the viral TK gene (TK partial and TK altered) and DNA polymerase have been isolated. TK-negative mutants may cause severe disease in infants and immunocompromised adults. The possibility of viral resistance to acyclovir should be considered in patients who show poor clinical response during therapy.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-530-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (61919-530-30) </PackageDescription>
    <NDC11Code>61919-0530-30</NDC11Code>
    <ProductNDC>61919-530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203834</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>ACYCLOVIR</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151228</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Herpes Zoster Infections: Acyclovir tablets, USP are indicated for the acute treatment of herpes zoster (shingles). Genital Herpes: Acyclovir tablets, USP are indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox: Acyclovir tablets, USP are indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
    <Description>Acyclovir is a synthetic nucleoside analogue active against herpesviruses. Acyclovir tablets, USP is a formulation for oral administration. Each Acyclovir Tablet contains 400 mg or 800 mg of acyclovir. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate. The 400 mg and 800 mg tablet also contains ferric oxide and FD&amp;C blue lake # 2 Indigo carmine AL, respectively. Acyclovir USP is a white to off white crystalline powder, slightly hygroscopic with the molecular formula C8H11N5O3 and a molecular weight of 225.20. The maximum solubility in water at 37°C is 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 6H-Purin-6-one, 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-. It has the following structural formula:. Mechanism of Antiviral Action: Acyclovir is a synthetic purine nucleoside analogue with in vitro and in vivo inhibitory activity against herpes simplex virus types 1 (HSV-1), 2 (HSV-2), and varicella-zoster virus (VZV). The inhibitory activity of acyclovir is highly selective due to its affinity for the enzyme thymidine kinase (TK) encoded by HSV and VZV. This viral enzyme converts acyclovir into acyclovir monophosphate, a nucleotide analogue. The monophosphate is further converted into diphosphate by cellular guanylate kinase and into triphosphate by a number of cellular enzymes. In vitro, acyclovir triphosphate stops replication of herpes viral DNA. This is accomplished in 3 ways: 1) competitive inhibition of viral DNA polymerase, 2) incorporation into and termination of the growing viral DNA chain, and 3) inactivation of the viral DNA polymerase. The greater antiviral activity of acyclovir against HSV compared with VZV is due to its more efficient phosphorylation by the viral TK. Antiviral Activities: The quantitative relationship between the in vitro susceptibility of herpes viruses to antivirals and the clinical response to therapy has not been established in humans, and virus sensitivity testing has not been standardized. Sensitivity testing results, expressed as the concentration of drug required to inhibit by 50% the growth of virus in cell culture (IC50), vary greatly depending upon a number of factors. Using plaque-reduction assays, the IC50 against herpes simplex virus isolates ranges from 0.02 to 13.5 mcg/mL for HSV-1 and from 0.01 to 9.9 mcg/mL for HSV-2. The IC50 for acyclovir against most laboratory strains and clinical isolates of VZV ranges from 0.12 to 10.8 mcg/mL. Acyclovir also demonstrates activity against the Oka vaccine strain of VZV with a mean IC50 of 1.35 mcg/mL. Drug Resistance: Resistance of HSV and VZV to acyclovir can result from qualitative and quantitative changes in the viral TK and/or DNA polymerase. Clinical isolates of HSV and VZV with reduced susceptibility to acyclovir have been recovered from immunocompromised patients, especially with advanced HIV infection. While most of the acyclovir-resistant mutants isolated thus far from immunocompromised patients have been found to be TK-deficient mutants, other mutants involving the viral TK gene (TK partial and TK altered) and DNA polymerase have been isolated. TK-negative mutants may cause severe disease in infants and immunocompromised adults. The possibility of viral resistance to acyclovir should be considered in patients who show poor clinical response during therapy.</Description>
  </NDC>
  <NDC>
    <NDCCode>12634-530-09</NDCCode>
    <PackageDescription>35 TABLET in 1 BOTTLE (12634-530-09)</PackageDescription>
    <NDC11Code>12634-0530-09</NDC11Code>
    <ProductNDC>12634-530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diethylpropion Hydrochloride</ProprietaryName>
    <NonProprietaryName>Diethylpropion Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19590806</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA011722</ApplicationNumber>
    <LabelerName>Apotheca Inc.</LabelerName>
    <SubstanceName>DIETHYLPROPION HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Appetite Suppression [PE], Increased Sympathetic Activity [PE], Sympathomimetic Amine Anorectic [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2022-08-02</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Diethylpropion hydrochloride is indicated in the management of exogenous obesity as a short-term adjunct (a few weeks) in a regimen of weight reduction based on caloric restriction in patients with an initial body mass index (BMI) of 30 kg/m 2 or higher and who have not responded to appropriate weight reducing regimen (diet and/or exercise) alone. Below is a chart of BMI based on various heights and weights. BMI is calculated by taking the patient’s weight, in kilograms (kg), divided by the patient’s height, in meters (m), squared. Metric conversions are as follows: pounds divided by 2.2 = kg; inches x 0.0254 = meters. The usefulness of agents of this class (see CLINICAL PHARMACOLOGY) should be measured against possible risk factors inherent in their use such as those described below. Diethylpropion hydrochloride is indicated for use as monotherapy only.</IndicationAndUsage>
    <Description>Diethylpropion hydrochloride is available for oral administration in immediate-release tablets containing 25 mg diethylpropion hydrochloride and in controlled-release tablets containing 75 mg diethylpropion hydrochloride. The inactive ingredients in each immediate-release tablet are: cornstarch, lactose, magnesium stearate, pregelatinized cornstarch, talc, and tartaric acid. The inactive ingredients in each controlled-release tablet are: carbomer 934P, mannitol, povidone, tartaric acid, zinc stearate. Diethylpropion hydrochloride is a sympathomimetic agent. The chemical name for diethylpropion hydrochloride is 1-phenyl-2-diethylamino-1-propanone hydrochloride. Its chemical structure is. The diethylpropion hydrochloride 75 mg formulation is dispersed in a hydrophilic matrix. On exposure to water, the diethylpropion hydrochloride is released at a relatively uniform rate as a result of slow hydration of the matrix. The result is controlled release of the anorectic agent.</Description>
  </NDC>
  <NDC>
    <NDCCode>67457-530-35</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (67457-530-35)  &gt; 17.5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>67457-0530-35</NDC11Code>
    <ProductNDC>67457-530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Leucovorin Calcium</ProprietaryName>
    <NonProprietaryName>Leucovorin Calcium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20190102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203800</ApplicationNumber>
    <LabelerName>Mylan Institutional LLC</LabelerName>
    <SubstanceName>LEUCOVORIN CALCIUM</SubstanceName>
    <StrengthNumber>350</StrengthNumber>
    <StrengthUnit>mg/17.5mL</StrengthUnit>
    <Pharm_Classes>Folate Analog [EPC], Folic Acid [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-01-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Leucovorin calcium rescue is indicated after high dose methotrexate therapy in osteosarcoma. Leucovorin calcium is also indicated to diminish the toxicity and counteract the effects of impaired methotrexate elimination and of inadvertent over dosages of folic acid antagonists. Leucovorin calcium is indicated in the treatment of megaloblastic anemias due to folic acid deficiency when oral therapy is not feasible. Leucovorin is also indicated for use in combination with 5-fluorouracil to prolong survival in the palliative treatment of patients with advanced colorectal cancer. Leucovorin should not be mixed in the same infusion as 5-fluorouracil because a precipitate may form.</IndicationAndUsage>
    <Description>Leucovorin is one of several active, chemically reduced derivatives of folic acid. It is useful as an antidote to drugs which act as folic acid antagonists. Also known as folinic acid, Citrovorum factor, or 5-formyl-5,6,7,8-tetrahydrofolic acid, this compound has the chemical designation of Calcium N-[p-[[[(6RS)-2-amino-5-formyl-5,6,7,8-tetrahydro-4-hydroxy-6-pteridinyl]methyl]amino]benzoyl]-L-glutamate (1:1). The structural formula of leucovorin calcium is. C20H21CaN7O7 M.W.=511.51. Leucovorin Calcium for Injection, USP, is a sterile product indicated for intramuscular (IM) or intravenous (IV) administration and is supplied in 100 mg, 200 mg, and 350 mg vials. Each 100 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 10 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 200 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 20 mL of sterile diluent, contains leucovorin (as the calcium salt) 10 mg/mL. Each 350 mg vial of Leucovorin Calcium for Injection, USP, when reconstituted with 17.5 mL of sterile diluent, contains leucovorin (as the calcium salt) 20 mg/mL. In each dosage form, one milligram of leucovorin calcium, USP contains 0.002 mmol of leucovorin and 0.002 mmol of calcium. These lyophilized products contain no preservative. The inactive ingredient is Sodium Chloride added to adjust tonicity and sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is between 6.5 and 8.5. Reconstitute with Bacteriostatic Water for Injection, USP, which contains benzyl alcohol (see WARNINGS section), or with Sterile Water for Injection, USP.</Description>
  </NDC>
  <NDC>
    <NDCCode>68462-530-35</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (68462-530-35)  / 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>68462-0530-35</NDC11Code>
    <ProductNDC>68462-530</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20170320</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208933</ApplicationNumber>
    <LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170320</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol propionate ointment is a super-high potency corticosteroid formulation indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 grams per week because of the potential for the drug to suppress the hypothalamic-pituitary-adrenal (HPA) axis. Use in pediatric patients under 12 years of age is not recommended. As with other highly active corticosteroids, therapy should be discontinued when control has been achieved. If no improvement is seen within 2 weeks, reassessment of the diagnosis may be necessary.</IndicationAndUsage>
    <Description>Clobetasol Propionate Ointment USP, 0.05% contains the active compound clobetasol propionate USP, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate USP is 21-Chloro-9-fluoro-11β,17-dihydroxy-16β-methylpregna-1,4-diene-3,20-dione 17-propionate, and it has the following structural formula. Clobetasol propionate USP has the empirical formula of C25H32ClFO5 and a molecular weight of 466.97 g/mol. It is a white to almost white, crystalline powder, practically insoluble in water, slightly soluble in benzene and diethyl ether; sparingly soluble in ethanol; freely soluble in acetone, in dimethylsulfoxide, in chloroform, in methanol and in dioxane. Clobetasol Propionate Ointment USP, 0.05% contains clobetasol propionate USP 0.5 mg/g in a base of propylene glycol, sorbitan sesquioleate, and white petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>73928-530-01</NDCCode>
    <PackageDescription>35 mL in 1 BOTTLE (73928-530-01) </PackageDescription>
    <NDC11Code>73928-0530-01</NDC11Code>
    <ProductNDC>73928-530</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Baja Blast Hydrating Hand Sanitizer</ProprietaryName>
    <NonProprietaryName>Alcohol Antiseptic</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20260401</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M003</ApplicationNumber>
    <LabelerName>Kingkey MBC Life Technology Group Co.,Ltd</LabelerName>
    <SubstanceName>ALCOHOL</SubstanceName>
    <StrengthNumber>62</StrengthNumber>
    <StrengthUnit>mL/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-06-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260402</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hand Sanitizer to help reduce bacteria that potentially can cause disease. For use when soap and water are not available.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>61919-003-35</NDCCode>
    <PackageDescription>35 TABLET in 1 BOTTLE (61919-003-35) </PackageDescription>
    <NDC11Code>61919-0003-35</NDC11Code>
    <ProductNDC>61919-003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077309</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>ACYCLOVIR</SubstanceName>
    <StrengthNumber>800</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Herpes Zoster Infections. Acyclovir tablet is indicated for the acute treatment of herpes zoster (shingles). Genital Herpes. Acyclovir tablet is indicated for the treatment of initial episodes and the management of recurrent episodes of genital herpes. Chickenpox. Acyclovir tablet is indicated for the treatment of chickenpox (varicella).</IndicationAndUsage>
    <Description>Acyclovir is a synthetic nucleoside analogue active against herpes viruses. Acyclovir tablet is a formulation for oral administration. Each 800 mg tablet of acyclovir contains 800 mg of acyclovir and the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. Each 400 mg tablet of acyclovir contains 400 mg of acyclovir and the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. Acyclovir is a white, crystalline powder with the molecular formula C8H11N5O3 and a molecular weight of 225.2. The maximum solubility in water at 37°C is 2.5 mg/mL. The pKa’s of acyclovir are 2.27 and 9.25. The chemical name of acyclovir is 2-amino-1,9-dihydro-9-[(2-hydroxyethoxy)methyl]-6H-purin-6-one; it has the following structural formula.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-090-35</NDCCode>
    <PackageDescription>3.5 g in 1 CARTON (61919-090-35) </PackageDescription>
    <NDC11Code>61919-0090-35</NDC11Code>
    <ProductNDC>61919-090</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Erythromycin</ProprietaryName>
    <NonProprietaryName>Erythromycin</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064067</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>ERYTHROMYCIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Macrolide Antimicrobial [EPC], Macrolide [EPC], Macrolides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of superficial ocular infections involving the conjunctiva and/or cornea caused by organisms susceptible to erythromycin. For prophylaxis of ophthalmia neonatorum due to N. gonorrhoeae or C. trachomatis. The effectiveness of erythromycin in the prevention of ophthalmia caused by penicillinase-producing N. gonorrhoeae is not established. For infants born to mothers with clinically apparent gonorrhea, intravenous or intramuscular injections of aqueous crystalline penicillin G should be given; a single dose of 50,000 units for term infants or 20,000 units for infants of low birth weight. Topical prophylaxis alone is inadequate for these infants.</IndicationAndUsage>
    <Description>Erythromycin Ophthalmic Ointment USP belongs to the macrolide group of antibiotics. The sterile ophthalmic ointment flows freely over the conjunctiva. Erythromycin base, as crystals or powder, is slightly soluble in water, moderately soluble in ether, and readily soluble in alcohol or chloroform. Erythromycin is an antibiotic produced from a strain of Streptomyces erythraeus. It is basic and readily forms a salt when combined with an acid. It has the following structural formula. Chemical Name: (3R, 4S, 5S, 6R, 7R, 9R, 11R, 12R, 13S, 14R)-4-[(2,6-Dideoxy-3-C-methyl-3-0-methyl-α-L-ribo-hexopyranosyl)oxy]-14-ethyl-7, 12, 13-trihydroxy-3, 5, 7, 9, 11, 13-hexamethyl-6-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]oxacyclotetradecane-2, 10-dione. Each Gram Contains: ACTIVE: Erythromycin, USP 5 mg (0.5%); INACTIVES: Mineral Oil, White Petrolatum.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-111-35</NDCCode>
    <PackageDescription>1 g in 1 CARTON (61919-111-35) </PackageDescription>
    <NDC11Code>61919-0111-35</NDC11Code>
    <ProductNDC>61919-111</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polycin</ProprietaryName>
    <NonProprietaryName>Bacitracin Zinc And Polymyxin B Sulfates</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20170329</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065022</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>BACITRACIN ZINC; POLYMYXIN B SULFATE</SubstanceName>
    <StrengthNumber>500; 10000</StrengthNumber>
    <StrengthUnit>[USP'U]/g; [USP'U]/g</StrengthUnit>
    <Pharm_Classes>Decreased Cell Wall Synthesis &amp; Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170329</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Polycin® Ophthalmic Ointment is indicated for the topical treatment of superficial infections of the external eye and its adnexa caused by susceptible bacteria. Such infections encompass conjunctivitis, keratitis and keratoconjunctivitis, blepharitis and blepharoconjunctivitis.</IndicationAndUsage>
    <Description>Bacitracin Zinc and Polymyxin B Sulfate Ophthalmic Ointment USP, is a sterile antimicrobial ointment for ophthalmic use. Each gram contains: bacitracin zinc equivalent to 500 bacitracin units, polymyxin B sulfate equivalent to 10,000 polymyxin B units, mineral oil, and white petrolatum. Bacitracin zinc is the zinc salt of bacitracin, a mixture of related cyclic polypeptides (mainly bacitracin A) produced by the growth of an organism of the licheniformisgroup of Bacillus subtilisvar Tracy. It has a potency of not less than 40 bacitracin units per mg. The structural formula for bacitracin A is. [Structural Formula Image 1]. Polymyxin B sulfate is the sulfate salt of polymyxin B1 and B2 which are produced by the growth of Bacillus polymyxa(Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are. [Structural Formula Image 2].</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-113-35</NDCCode>
    <PackageDescription>3.5 g in 1 CARTON (61919-113-35) </PackageDescription>
    <NDC11Code>61919-0113-35</NDC11Code>
    <ProductNDC>61919-113</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Neomycin And Polymyxin B Sulfates And Dexamethasone</ProprietaryName>
    <NonProprietaryName>Neomycin, Polymyxin B Sulfates, Dexamethasone</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20170317</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062938</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>DEXAMETHASONE; NEOMYCIN SULFATE; POLYMYXIN B SULFATE</SubstanceName>
    <StrengthNumber>1; 3.5; 10000</StrengthNumber>
    <StrengthUnit>mg/g; mg/g; [USP'U]/g</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170317</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For steroid-responsive inflammatory ocular conditions for which a corticosteroid is indicated and where bacterial infection or risk of bacterial ocular infection exists. Ocular steroids are indicated in inflammatory conditions of the palpebral and bulbar conjunctiva, cornea, and anterior segment of the globe where the inherent risk of steroid use in certain infective conjunctivitises is accepted to obtain a diminution in edema and inflammation. They are also indicated in chronic anterior uveitis and corneal injury from chemical, radiation or thermal burns; or penetration of foreign bodies. The use of a combination drug with an anti-infective component is indicated where the risk of infection is high or where there is an expectation that potentially dangerous numbers of bacteria will be present in the eye. The particular anti-infective drugs in this product is active against the following common bacterial eye pathogens: Staphylococcus aureus, Escherichia coli, Haemophilusinfluenzae, Klebsiella/Enterobacterspecies, Niesseriaspecies, and Pseudomonas aeruginosa. This product does not provide adequate coverage against: Serratiamarcescensand Streptococci, including Streptococcus pneumoniae.</IndicationAndUsage>
    <Description>Neomycin and Polymyxin B Sulfates and Dexamethasone Ophthalmic Ointment USP is a multiple dose anti-infective steroid combination in a sterile ointment for topical application. The active ingredient dexamethasone, is represented by the following structural formula. [Structural Formula Image 1]. C22H29FO5 Mol. Wt. 392.47. Chemical Name: Pregna-1,4-diene-3,20-dione, 9-fluoro-11, 17,21-trihydroxy-16-methyl-, (11ß, 16α)-. Neomycin Sulfate is the sulfate salt of neomycin B and C which are produced by the growth of Streptomyces fradiaeWaksman (Fam. Streptomycetaceae). It has a potency equivalent to not less than 600 micrograms of neomycin base per milligram, calculated on an anhydrous basis. The structural formula are. [Structural Formula Image 2]. Polymyxin B Sulfate is the sulfate salt of polymyxin B1 and B2 which are produced by the growth of Bacillus polymyxa(Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per milligram, calculated on an anhydrous basis. The structural formula are. [Structural Formula Image 3]. Each gram of ointment contains: ACTIVES: Dexamethasone 1 mg (0.1%), Neomycin Sulfate equivalent to Neomycin 3.5 mg base, Polymyxin B Sulfate 10,000 units in a base containing INACTIVES: White Petrolatum and Mineral Oil.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-469-35</NDCCode>
    <PackageDescription>35 TABLET in 1 BOTTLE (61919-469-35) </PackageDescription>
    <NDC11Code>61919-0469-35</NDC11Code>
    <ProductNDC>61919-469</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meloxicam</ProprietaryName>
    <NonProprietaryName>Meloxicam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077927</ApplicationNumber>
    <LabelerName>Direct Rx</LabelerName>
    <SubstanceName>MELOXICAM</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>61919-774-35</NDCCode>
    <PackageDescription>35.44 g in 1 TUBE (61919-774-35) </PackageDescription>
    <NDC11Code>61919-0774-35</NDC11Code>
    <ProductNDC>61919-774</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20190401</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205318</ApplicationNumber>
    <LabelerName>DIRECTRX</LabelerName>
    <SubstanceName>LIDOCAINE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190401</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine Ointment USP, 5% is indicated for production of anesthesia of accessible mucous membranes of the oropharynx. It is also useful as an anesthetic lubricant for intubation and for the temporary relief of pain associated with minor burns, including sunburn, abrasions of the skin, and insect bites.</IndicationAndUsage>
    <Description>Lidocaine Ointment USP, 5% contains a local anesthetic agent and is administered topically. See INDICATIONS AND USAGE for specific uses. Lidocaine Ointment USP, 5% contains lidocaine, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, and has the following structural formula. [Structural Formula]. Composition of Lidocaine Ointment USP, 5%: acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, (lidocaine) 5% in a water miscible ointment vehicle containing polyethylene glycol 300 and polyethylene glycol 1450.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-989-35</NDCCode>
    <PackageDescription>3.5 g in 1 CARTON (61919-989-35) </PackageDescription>
    <NDC11Code>61919-0989-35</NDC11Code>
    <ProductNDC>61919-989</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ak-poly-bac</ProprietaryName>
    <NonProprietaryName>Ak-poly-bac</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA064028</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>BACITRACIN ZINC; POLYMYXIN B SULFATE</SubstanceName>
    <StrengthNumber>500; 10000</StrengthNumber>
    <StrengthUnit>[USP'U]/g; [USP'U]/g</StrengthUnit>
    <Pharm_Classes>Decreased Cell Wall Synthesis &amp; Repair [PE], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of superficial ocular infections involving the conjunctiva and/or cornea caused by organisms susceptible to bacitracin zinc and polymyxin B sulfate.</IndicationAndUsage>
    <Description>Polymyxin B Sulfate is the sulfate salt of polymyxin B1 and B2 which are produced by the growth of Bacillus polymyxa (Prazmowski) Migula (Fam. Bacillaceae). It has a potency of not less than 6,000 polymyxin B units per mg, calculated on an anhydrous basis. The structural formulae are. Each gram contains: Bacitracin zinc equal to 500 bacitracin units and polymyxin B sulfate equal to 10,000 polymyxin B units, white petrolatum and mineral oil.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-311-35</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (46708-311-35) </PackageDescription>
    <NDC11Code>46708-0311-35</NDC11Code>
    <ProductNDC>46708-311</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bosutinib</ProprietaryName>
    <NonProprietaryName>Bosutinib</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260519</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209543</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>BOSUTINIB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260519</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bosutinib tablets are indicated for the treatment of.  Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)].  Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water.  Bosutinib tablets are supplied for oral administration in two strengths: 100 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients:  croscarmellose sodium, hypromellose, iron oxide red (for 500 mg tablet), iron oxide yellow (for 100 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, talc (for 500 mg tablet) and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-311-35</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (62332-311-35) </PackageDescription>
    <NDC11Code>62332-0311-35</NDC11Code>
    <ProductNDC>62332-311</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bosutinib</ProprietaryName>
    <NonProprietaryName>Bosutinib</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20260519</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209543</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>BOSUTINIB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260519</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bosutinib tablets are indicated for the treatment of.  Adult patients with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), resistant or intolerant to prior therapy [see Clinical Studies (14.2)].  Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)]. Pediatric use information is approved for PF PRISM CV’s BOSULIF® (bosutinib) tablets. However, due to PF PRISM CV’s marketing exclusivity rights, this drug product is not labeled with that information.</IndicationAndUsage>
    <Description>Bosutinib tablet contains bosutinib, a kinase inhibitor. The chemical name for bosutinib is 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]. Its chemical formula is C26H29Cl2N5O3; its molecular weight is 530.45. Bosutinib has the following chemical structure. Bosutinib is a white to yellowish-tan powder. Bosutinib is freely soluble in dimethyl sulfoxide, very slightly soluble in ethyl acetate and practically insoluble in water. Bosutinib tablets are supplied for oral administration in two strengths: a 100 mg yellow colored, oval shaped, biconvex, film coated tablet, debossed with L603 on one side and plain on other side; and a 500 mg red colored, oval shaped, biconvex, film coated tablet debossed with L604 on one side and plain on the other. Each 100 mg bosutinib tablet contains 100 mg of bosutinib; each 500 mg bosutinib tablet contains 500 mg of bosutinib. The following inactive ingredients are included in the tablets: croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, poloxamer 188, polyethylene glycol 6000, povidone K-25, titanium dioxide. Additionally 100 mg tablet contain iron oxide yellow and 500 mg tablet contains iron oxide red and talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-002-30</NDCCode>
    <PackageDescription>30 CAPSULE, COATED, EXTENDED RELEASE in 1 BOTTLE (61919-002-30)</PackageDescription>
    <NDC11Code>61919-0002-30</NDC11Code>
    <ProductNDC>61919-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022370</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol Hydrochloride Extended-Release is indicated for the management of moderate to moderately severe chronic pain in adults who require around-the-clock treatment of their pain for an extended period of time.</IndicationAndUsage>
    <Description>Tramadol Hydrochloride Extended-Release (tramadol hydrochloride) capsules is a centrally acting synthetic analgesic in an extended-release oral formulation. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Figure 1. The molecular weight of tramadol hydrochloride is 299.8. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Extended-Release capsules contain a total dose of tramadol HCl 100, 200 and 300 mg in a combination of immediate-release and extended-release components. Tramadol Hydrochloride Extended-Release capsules are white in color. Inactive ingredients include gelatin, titanium dioxide, shellac, yellow iron oxide, lactose monohydrate 200 mesh, microcrystalline cellulose, povidone K30, corn starch, sodium starch glycolate, magnesium stearate, sucrose stearate, hypromellose, talc, polysorbate 80, Eudragit NE 30D, and simethicone emulsion.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-002-60</NDCCode>
    <PackageDescription>60 CAPSULE, COATED, EXTENDED RELEASE in 1 BOTTLE (61919-002-60)</PackageDescription>
    <NDC11Code>61919-0002-60</NDC11Code>
    <ProductNDC>61919-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022370</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol Hydrochloride Extended-Release is indicated for the management of moderate to moderately severe chronic pain in adults who require around-the-clock treatment of their pain for an extended period of time.</IndicationAndUsage>
    <Description>Tramadol Hydrochloride Extended-Release (tramadol hydrochloride) capsules is a centrally acting synthetic analgesic in an extended-release oral formulation. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Figure 1. The molecular weight of tramadol hydrochloride is 299.8. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Extended-Release capsules contain a total dose of tramadol HCl 100, 200 and 300 mg in a combination of immediate-release and extended-release components. Tramadol Hydrochloride Extended-Release capsules are white in color. Inactive ingredients include gelatin, titanium dioxide, shellac, yellow iron oxide, lactose monohydrate 200 mesh, microcrystalline cellulose, povidone K30, corn starch, sodium starch glycolate, magnesium stearate, sucrose stearate, hypromellose, talc, polysorbate 80, Eudragit NE 30D, and simethicone emulsion.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-002-72</NDCCode>
    <PackageDescription>100 CAPSULE, COATED, EXTENDED RELEASE in 1 BOTTLE (61919-002-72)</PackageDescription>
    <NDC11Code>61919-0002-72</NDC11Code>
    <ProductNDC>61919-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022370</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol Hydrochloride Extended-Release is indicated for the management of moderate to moderately severe chronic pain in adults who require around-the-clock treatment of their pain for an extended period of time.</IndicationAndUsage>
    <Description>Tramadol Hydrochloride Extended-Release (tramadol hydrochloride) capsules is a centrally acting synthetic analgesic in an extended-release oral formulation. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Figure 1. The molecular weight of tramadol hydrochloride is 299.8. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Extended-Release capsules contain a total dose of tramadol HCl 100, 200 and 300 mg in a combination of immediate-release and extended-release components. Tramadol Hydrochloride Extended-Release capsules are white in color. Inactive ingredients include gelatin, titanium dioxide, shellac, yellow iron oxide, lactose monohydrate 200 mesh, microcrystalline cellulose, povidone K30, corn starch, sodium starch glycolate, magnesium stearate, sucrose stearate, hypromellose, talc, polysorbate 80, Eudragit NE 30D, and simethicone emulsion.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-002-90</NDCCode>
    <PackageDescription>90 CAPSULE, COATED, EXTENDED RELEASE in 1 BOTTLE (61919-002-90)</PackageDescription>
    <NDC11Code>61919-0002-90</NDC11Code>
    <ProductNDC>61919-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA022370</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol Hydrochloride Extended-Release is indicated for the management of moderate to moderately severe chronic pain in adults who require around-the-clock treatment of their pain for an extended period of time.</IndicationAndUsage>
    <Description>Tramadol Hydrochloride Extended-Release (tramadol hydrochloride) capsules is a centrally acting synthetic analgesic in an extended-release oral formulation. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Figure 1. The molecular weight of tramadol hydrochloride is 299.8. It is a white, bitter, crystalline and odorless powder that is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol Hydrochloride Extended-Release capsules contain a total dose of tramadol HCl 100, 200 and 300 mg in a combination of immediate-release and extended-release components. Tramadol Hydrochloride Extended-Release capsules are white in color. Inactive ingredients include gelatin, titanium dioxide, shellac, yellow iron oxide, lactose monohydrate 200 mesh, microcrystalline cellulose, povidone K30, corn starch, sodium starch glycolate, magnesium stearate, sucrose stearate, hypromellose, talc, polysorbate 80, Eudragit NE 30D, and simethicone emulsion.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-055-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (61919-055-30) </PackageDescription>
    <NDC11Code>61919-0055-30</NDC11Code>
    <ProductNDC>61919-055</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Citalopram Hydrobromide</ProprietaryName>
    <NonProprietaryName>Citalopram Hydrobromide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077032</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Citalopram HBr, USP is indicated for the treatment of depression. The efficacy of Citalopram tablets, USP in the treatment of depression was established in 4-6 week, controlled trials of outpatients whose diagnosis corresponded most closely to the DSM-lll and DSM-lll-R category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The antidepressant action of Citalopram tablets, USP in hospitalized depressed patients has not been adequately studied. The efficacy of Citalopram tablets, USP in maintaining an antidepressant response for up to 24 weeks following 6 to 8 weeks of acute treatment was demonstrated in two placebo-controlled trials (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use Citalopram tablets, USP for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Citalopram HBr is an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram HBr is a racemic bicyclic phthalane derivative designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5- carbonitrile, HBr with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram HBr occurs as a fine, white to off-white powder. Citalopram HBr is sparingly soluble in water and soluble in ethanol. Citalopram 10 mg tablets, USP are film-coated, round, plain tablets containing citalopram HBr in strengths equivalent to 10 mg citalopram base. Citalopram 20 mg and 40 mg tablets, USP are film coated, oval, scored tablets containing citalopram HBr in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: Copolyvidone, Corn Starch, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Colloidal Silicon Dioxide, Microcrystalline Cellulose, Titanium Dioxide, Hypromellose 6, and Polyethylene Glycol-4000. In addition, citalopram 10 mg tablet contains iron oxide red and yellow iron oxide; 20 mg tablet contains iron oxide red and black iron oxide; 40 mg tablet contains polysorbate 80.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-056-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (61919-056-30)</PackageDescription>
    <NDC11Code>61919-0056-30</NDC11Code>
    <ProductNDC>61919-056</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Citalopram</ProprietaryName>
    <NonProprietaryName>Citalopram</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077032</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Citalopram HBr, USP is indicated for the treatment of depression. The efficacy of Citalopram tablets, USP in the treatment of depression was established in 4-6 week, controlled trials of outpatients whose diagnosis corresponded most closely to the DSM-lll and DSM-lll-R category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The antidepressant action of Citalopram tablets, USP in hospitalized depressed patients has not been adequately studied. The efficacy of Citalopram tablets, USP in maintaining an antidepressant response for up to 24 weeks following 6 to 8 weeks of acute treatment was demonstrated in two placebo-controlled trials (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use Citalopram tablets, USP for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Citalopram HBr is an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram HBr is a racemic bicyclic phthalane derivative designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5- carbonitrile, HBr with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram HBr occurs as a fine, white to off-white powder. Citalopram HBr is sparingly soluble in water and soluble in ethanol. Citalopram 10 mg tablets, USP are film-coated, round, plain tablets containing citalopram HBr in strengths equivalent to 10 mg citalopram base. Citalopram 20 mg and 40 mg tablets, USP are film coated, oval, scored tablets containing citalopram HBr in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: Copolyvidone, Corn Starch, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Colloidal Silicon Dioxide, Microcrystalline Cellulose, Titanium Dioxide, Hypromellose 6, and Polyethylene Glycol-4000. In addition, citalopram 10 mg tablet contains iron oxide red and yellow iron oxide; 20 mg tablet contains iron oxide red and black iron oxide; 40 mg tablet contains polysorbate 80.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-056-60</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE (61919-056-60)</PackageDescription>
    <NDC11Code>61919-0056-60</NDC11Code>
    <ProductNDC>61919-056</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Citalopram</ProprietaryName>
    <NonProprietaryName>Citalopram</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077032</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Citalopram HBr, USP is indicated for the treatment of depression. The efficacy of Citalopram tablets, USP in the treatment of depression was established in 4-6 week, controlled trials of outpatients whose diagnosis corresponded most closely to the DSM-lll and DSM-lll-R category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The antidepressant action of Citalopram tablets, USP in hospitalized depressed patients has not been adequately studied. The efficacy of Citalopram tablets, USP in maintaining an antidepressant response for up to 24 weeks following 6 to 8 weeks of acute treatment was demonstrated in two placebo-controlled trials (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use Citalopram tablets, USP for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Citalopram HBr is an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram HBr is a racemic bicyclic phthalane derivative designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5- carbonitrile, HBr with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram HBr occurs as a fine, white to off-white powder. Citalopram HBr is sparingly soluble in water and soluble in ethanol. Citalopram 10 mg tablets, USP are film-coated, round, plain tablets containing citalopram HBr in strengths equivalent to 10 mg citalopram base. Citalopram 20 mg and 40 mg tablets, USP are film coated, oval, scored tablets containing citalopram HBr in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: Copolyvidone, Corn Starch, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Colloidal Silicon Dioxide, Microcrystalline Cellulose, Titanium Dioxide, Hypromellose 6, and Polyethylene Glycol-4000. In addition, citalopram 10 mg tablet contains iron oxide red and yellow iron oxide; 20 mg tablet contains iron oxide red and black iron oxide; 40 mg tablet contains polysorbate 80.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-056-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (61919-056-90)</PackageDescription>
    <NDC11Code>61919-0056-90</NDC11Code>
    <ProductNDC>61919-056</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Citalopram</ProprietaryName>
    <NonProprietaryName>Citalopram</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077032</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>CITALOPRAM HYDROBROMIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Citalopram HBr, USP is indicated for the treatment of depression. The efficacy of Citalopram tablets, USP in the treatment of depression was established in 4-6 week, controlled trials of outpatients whose diagnosis corresponded most closely to the DSM-lll and DSM-lll-R category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The antidepressant action of Citalopram tablets, USP in hospitalized depressed patients has not been adequately studied. The efficacy of Citalopram tablets, USP in maintaining an antidepressant response for up to 24 weeks following 6 to 8 weeks of acute treatment was demonstrated in two placebo-controlled trials (see CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use Citalopram tablets, USP for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient.</IndicationAndUsage>
    <Description>Citalopram HBr is an orally administered selective serotonin reuptake inhibitor (SSRI) with a chemical structure unrelated to that of other SSRIs or of tricyclic, tetracyclic, or other available antidepressant agents. Citalopram HBr is a racemic bicyclic phthalane derivative designated (±)-1-(3-dimethylaminopropyl)-1-(4-fluorophenyl)-1,3-dihydroisobenzofuran-5- carbonitrile, HBr with the following structural formula. The molecular formula is C20H22BrFN2O and its molecular weight is 405.35. Citalopram HBr occurs as a fine, white to off-white powder. Citalopram HBr is sparingly soluble in water and soluble in ethanol. Citalopram 10 mg tablets, USP are film-coated, round, plain tablets containing citalopram HBr in strengths equivalent to 10 mg citalopram base. Citalopram 20 mg and 40 mg tablets, USP are film coated, oval, scored tablets containing citalopram HBr in strengths equivalent to 20 mg or 40 mg citalopram base. The tablets also contain the following inactive ingredients: Copolyvidone, Corn Starch, Croscarmellose Sodium, Lactose Monohydrate, Magnesium Stearate, Colloidal Silicon Dioxide, Microcrystalline Cellulose, Titanium Dioxide, Hypromellose 6, and Polyethylene Glycol-4000. In addition, citalopram 10 mg tablet contains iron oxide red and yellow iron oxide; 20 mg tablet contains iron oxide red and black iron oxide; 40 mg tablet contains polysorbate 80.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-20</NDCCode>
    <PackageDescription>20 TABLET, COATED in 1 BOTTLE (61919-073-20)</PackageDescription>
    <NDC11Code>61919-0073-20</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are a centrally acting analgesic. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H25NO2HCl and its molecular weight is 299.8. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Each tramadol hydrochloride tablet, USP intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, it also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-21</NDCCode>
    <PackageDescription>21 TABLET, COATED in 1 BOTTLE (61919-073-21) </PackageDescription>
    <NDC11Code>61919-0073-21</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2026-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tramadol hydrochloride extended-release tablets are indicated for the management of moderate to moderately severe chronic pain in adults who require around-the-clock treatment of their pain for an extended period of time.</IndicationAndUsage>
    <Description>Tramadol hydrochloride is a centrally acting synthetic analgesic in an extended-release formulation. The chemical name is (±)cis-2-[(dimethylamino) methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. Figure 1. The molecular weight of tramadol hydrochloride is 299.84. It is a white, crystalline powder that is freely soluble in water and methanol, very slightly soluble in acetone and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride extended-release tablets contain 100 mg, 200 mg or 300 mg of tramadol hydrochloride, USP in an extended-release formulation. The tablets are white in color and contain the inactive ingredients pregelatinized maize starch, hypromellose, mannitol, magnesium stearate, cellulose acetate and polyethylene glycol. Imprinting ink contains, shellac glaze, iron oxide black, N-butyl alcohol, ammonium hydroxide and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-30</NDCCode>
    <PackageDescription>30 TABLET, COATED in 1 BOTTLE (61919-073-30)</PackageDescription>
    <NDC11Code>61919-0073-30</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are a centrally acting analgesic. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H25NO2HCl and its molecular weight is 299.8. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Each tramadol hydrochloride tablet, USP intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, it also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-40</NDCCode>
    <PackageDescription>40 TABLET, COATED in 1 BOTTLE (61919-073-40) </PackageDescription>
    <NDC11Code>61919-0073-40</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190709</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>Direct_Rx</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve tramadol hydrochloride tablets for use in patients for whom alternative treatment options [e.g., non-opioid analgesics]. Have not been tolerated or are not expected to be tolerated. Have not provided adequate analgesia or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl) cyclohexanol hydrochloride. The structural formula is. [10]. The molecular weight of tramadol hydrochloride is 299.8. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP and are white in color. Inactive ingredients in the tablet are hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-60</NDCCode>
    <PackageDescription>60 TABLET, COATED in 1 BOTTLE (61919-073-60)</PackageDescription>
    <NDC11Code>61919-0073-60</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are a centrally acting analgesic. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H25NO2HCl and its molecular weight is 299.8. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Each tramadol hydrochloride tablet, USP intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, it also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-71</NDCCode>
    <PackageDescription>100 TABLET, COATED in 1 BOTTLE (61919-073-71)</PackageDescription>
    <NDC11Code>61919-0073-71</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are a centrally acting analgesic. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H25NO2HCl and its molecular weight is 299.8. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Each tramadol hydrochloride tablet, USP intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, it also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-073-72</NDCCode>
    <PackageDescription>120 TABLET, COATED in 1 BOTTLE (61919-073-72)</PackageDescription>
    <NDC11Code>61919-0073-72</NDC11Code>
    <ProductNDC>61919-073</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076003</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Tramadol hydrochloride tablets, USP are indicated for the management of moderate to moderately severe pain in adults.</IndicationAndUsage>
    <Description>Tramadol hydrochloride tablets, USP are a centrally acting analgesic. The chemical name for tramadol hydrochloride is (±)cis-2-[(dimethylamino)methyl]-1-(3methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular formula of tramadol hydrochloride is C16H25NO2HCl and its molecular weight is 299.8. Tramadol hydrochloride is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Each tramadol hydrochloride tablet, USP intended for oral administration contains 50 mg of tramadol hydrochloride. In addition, it also contains the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, pregelatinized starch, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
</NDCList>