{
"NDC": [
{
"NDCCode": "61958-3301-2",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (61958-3301-2) ",
"NDC11Code": "61958-3301-02",
"ProductNDC": "61958-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Livdelzi",
"NonProprietaryName": "Seladelpar Lysine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240814",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217899",
"LabelerName": "Gilead Sciences, Inc",
"SubstanceName": "SELADELPAR LYSINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"IndicationAndUsage": "LIVDELZI is indicated for the treatment of primary biliary cholangitis (PBC) in combination with ursodeoxycholic acid (UDCA) in adults who have had an inadequate response to UDCA, or as monotherapy in patients unable to tolerate UDCA. This indication is approved under accelerated approval based on a reduction of alkaline phosphatase (ALP) [see Clinical Studies (14)]. Improvement in survival or prevention of liver decompensation events have not been demonstrated. Continued approval for this indication may be contingent upon verification and description of clinical benefit in confirmatory trial(s).",
"Description": "LIVDELZI capsules contain seladelpar lysine, a peroxisome proliferator-activated receptor (PPAR)-delta (δ) agonist. Seladelpar is a single enantiomer of the R-configuration and is present as a lysine dihydrate salt. Seladelpar lysine dihydrate is a white to off-white powder with a molecular formula of C21H23F3O5S ∙C6H14N2O2 ∙2H2O and a molecular weight of 626.7 g/mol. Its solubility in water is pH dependent. It is slightly soluble at low pH and very soluble at high pH. The chemical name for seladelpar lysine dihydrate is 2-[4-[[(2R)-2-ethoxy-3-[4-(trifluoromethyl)phenoxy]propyl]thio]-2-methylphenoxy]acetic acid, lysine dihydrate, and the chemical structure is. LIVDELZI (seladelpar) capsules are supplied in a 10 mg strength for oral administration. Each capsule contains 14.1 mg of seladelpar lysine and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, and hard gelatin shells. The light gray opaque (body)/dark blue opaque (cap) capsule shells contain gelatin, titanium dioxide, black iron oxide, yellow iron oxide, red iron oxide and the colorant FD&C Blue #2."
},
{
"NDCCode": "61958-3301-1",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (61958-3301-1) ",
"NDC11Code": "61958-3301-01",
"ProductNDC": "61958-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Livdelzi",
"NonProprietaryName": "Seladelpar Lysine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240814",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA217899",
"LabelerName": "Gilead Sciences, Inc",
"SubstanceName": "SELADELPAR LYSINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240814",
"SamplePackage": "N",
"IndicationAndUsage": "LIVDELZI is indicated for the treatment of primary biliary cholangitis (PBC) in combination with ursodeoxycholic acid (UDCA) in adults who have had an inadequate response to UDCA, or as monotherapy in patients unable to tolerate UDCA. This indication is approved under accelerated approval based on a reduction of alkaline phosphatase (ALP) [see Clinical Studies (14)]. Improvement in survival or prevention of liver decompensation events have not been demonstrated. Continued approval for this indication may be contingent upon verification and description of clinical benefit in confirmatory trial(s).",
"Description": "LIVDELZI capsules contain seladelpar lysine, a peroxisome proliferator-activated receptor (PPAR)-delta (δ) agonist. Seladelpar is a single enantiomer of the R-configuration and is present as a lysine dihydrate salt. Seladelpar lysine dihydrate is a white to off-white powder with a molecular formula of C21H23F3O5S ∙C6H14N2O2 ∙2H2O and a molecular weight of 626.7 g/mol. Its solubility in water is pH dependent. It is slightly soluble at low pH and very soluble at high pH. The chemical name for seladelpar lysine dihydrate is 2-[4-[[(2R)-2-ethoxy-3-[4-(trifluoromethyl)phenoxy]propyl]thio]-2-methylphenoxy]acetic acid, lysine dihydrate, and the chemical structure is. LIVDELZI (seladelpar) capsules are supplied in a 10 mg strength for oral administration. Each capsule contains 14.1 mg of seladelpar lysine and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, and hard gelatin shells. The light gray opaque (body)/dark blue opaque (cap) capsule shells contain gelatin, titanium dioxide, black iron oxide, yellow iron oxide, red iron oxide and the colorant FD&C Blue #2."
},
{
"NDCCode": "10106-3301-2",
"PackageDescription": "158.76 kg in 1 DRUM (10106-3301-2) ",
"NDC11Code": "10106-3301-02",
"ProductNDC": "10106-3301",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "GRANULE",
"StartMarketingDate": "20180626",
"EndMarketingDate": "20250124",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Avantor Performance Materials International, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "26-JUN-18",
"EndMarketingDatePackage": "24-JAN-25"
},
{
"NDCCode": "36987-3301-2",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (36987-3301-2)",
"NDC11Code": "36987-3301-02",
"ProductNDC": "36987-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Palmers Amaranth",
"NonProprietaryName": "Palmers Amaranth",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRADERMAL; SUBCUTANEOUS",
"StartMarketingDate": "19720829",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA102192",
"LabelerName": "Nelco Laboratories, Inc.",
"SubstanceName": "AMARANTHUS PALMERI POLLEN",
"StrengthNumber": "10000",
"StrengthUnit": "[PNU]/mL",
"Pharm_Classes": "Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.",
"Description": "Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections."
},
{
"NDCCode": "37662-3301-2",
"PackageDescription": "500 PELLET in 1 VIAL, GLASS (37662-3301-2) ",
"NDC11Code": "37662-3301-02",
"ProductNDC": "37662-3301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Quercus Rubra Glandium",
"NonProprietaryName": "Quercus Rubra Glandium",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20230602",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, INC.",
"SubstanceName": "QUERCUS RUBRA WHOLE",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/1",
"Status": "Active",
"LastUpdate": "2023-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230602",
"SamplePackage": "N"
},
{
"NDCCode": "55346-3301-2",
"PackageDescription": "236 mL in 1 BOTTLE, SPRAY (55346-3301-2) ",
"NDC11Code": "55346-3301-02",
"ProductNDC": "55346-3301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "San-ez",
"NonProprietaryName": "Isopropyl Alcohol Antiseptic 75% Topical Solution",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200325",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Dental Technologies, Inc.",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "75",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2021-11-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200325",
"SamplePackage": "N"
},
{
"NDCCode": "63629-3301-2",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (63629-3301-2)",
"NDC11Code": "63629-3301-02",
"ProductNDC": "63629-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Celebrex",
"NonProprietaryName": "Celecoxib",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19981002",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020998",
"LabelerName": "Bryant Ranch Prepack",
"SubstanceName": "CELECOXIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-05-30",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "61958-0801-2",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (61958-0801-2) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "61958-0801-02",
"ProductNDC": "61958-0801",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Letairis",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022081",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070615",
"SamplePackage": "N",
"IndicationAndUsage": "Letairis is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)].",
"Description": "Letairis contains ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1 Ambrisentan Structural Formula. Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Letairis is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each square, pale pink Letairis tablet contains 5 mg of ambrisentan. Each oval, deep pink Letairis tablet contains 10 mg of ambrisentan. Letairis tablets are unscored."
},
{
"NDCCode": "61958-0802-2",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (61958-0802-2) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "61958-0802-02",
"ProductNDC": "61958-0802",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Letairis",
"NonProprietaryName": "Ambrisentan",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022081",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "AMBRISENTAN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20070615",
"SamplePackage": "N",
"IndicationAndUsage": "Letairis is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)].",
"Description": "Letairis contains ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1 Ambrisentan Structural Formula. Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Letairis is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each square, pale pink Letairis tablet contains 5 mg of ambrisentan. Each oval, deep pink Letairis tablet contains 10 mg of ambrisentan. Letairis tablets are unscored."
},
{
"NDCCode": "61958-0901-1",
"PackageDescription": "2 CARTON in 1 PACKAGE (61958-0901-1) / 1 KIT in 1 CARTON * 1 mL in 1 VIAL * 1 mL in 1 AMPULE",
"NDC11Code": "61958-0901-01",
"ProductNDC": "61958-0901",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cayston",
"NonProprietaryName": "Aztreonam",
"DosageFormName": "KIT",
"StartMarketingDate": "20100222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050814",
"LabelerName": "Gilead Sciences, Inc.",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100222",
"SamplePackage": "N",
"IndicationAndUsage": "CAYSTON® is indicated to improve respiratory symptoms in cystic fibrosis (CF) patients with Pseudomonas aeruginosa. Safety and effectiveness have not been established in pediatric patients below the age of 7 years, patients with FEV1 <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)]. To reduce the development of drug-resistant bacteria and maintain the effectiveness of CAYSTON and other antibacterial drugs, CAYSTON should be used only to treat patients with CF known to have Pseudomonas aeruginosa in the lungs.",
"Description": "A dose of CAYSTON consists of a 2 mL amber glass vial containing lyophilized aztreonam (75 mg) and lysine (46.7 mg), and a low-density polyethylene ampule containing 1 mL sterile diluent (0.17% sodium chloride). The reconstituted solution is for inhalation. The formulation contains no preservatives or arginine. The active ingredient in CAYSTON is aztreonam, a monobactam antibacterial. The monobactams are structurally different from beta-lactam antibiotics (e.g., penicillins, cephalosporins, carbapenems) due to a monocyclic nucleus. This nucleus contains several side chains; sulfonic acid in the 1-position activates the nucleus, an aminothiazolyl oxime side chain in the 3-position confers specificity for aerobic Gram-negative bacteria including Pseudomonas spp., and a methyl group in the 4-position enhances beta-lactamase stability. Aztreonam is designated chemically as (Z)-2-[[[(2-amino-4-thiazolyl)[[(2S,3S)-2-methyl-4-oxo-1-sulfo-3-azetidinyl]carbamoyl]methylene]amino]oxy]-2-methylpropionic acid. The structural formula is presented below. CAYSTON is a white to off-white powder. CAYSTON is sterile, hygroscopic, and light sensitive. Once reconstituted with the supplied diluent, the pH range is 4.5 to 6.0."
},
{
"NDCCode": "61958-1003-2",
"PackageDescription": "14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (61958-1003-2) ",
"NDC11Code": "61958-1003-02",
"ProductNDC": "61958-1003",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranexa",
"NonProprietaryName": "Ranolazine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20060127",
"EndMarketingDate": "20231231",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021526",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "RANOLAZINE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060127",
"EndMarketingDatePackage": "20231231",
"SamplePackage": "N",
"IndicationAndUsage": "RANEXA® is indicated for the treatment of chronic angina. RANEXA may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.",
"Description": "RANEXA (ranolazine) is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white solid. Ranolazine is soluble in dichloromethane and methanol; sparingly soluble in tetrahydrofuran, ethanol, acetonitrile, and acetone; slightly soluble in ethyl acetate, isopropanol, toluene, and ethyl ether; and very slightly soluble in water. RANEXA tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, methacrylic acid copolymer (Type C), microcrystalline cellulose, polyethylene glycol, sodium hydroxide, and titanium dioxide. Additional inactive ingredients for the 500 mg tablet include polyvinyl alcohol, talc, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include lactose monohydrate, triacetin, and Iron Oxide Yellow."
},
{
"NDCCode": "61958-1004-2",
"PackageDescription": "14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (61958-1004-2) ",
"NDC11Code": "61958-1004-02",
"ProductNDC": "61958-1004",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranexa",
"NonProprietaryName": "Ranolazine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20070212",
"EndMarketingDate": "20240131",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021526",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "RANOLAZINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20070212",
"EndMarketingDatePackage": "20240131",
"SamplePackage": "N",
"IndicationAndUsage": "RANEXA® is indicated for the treatment of chronic angina. RANEXA may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.",
"Description": "RANEXA (ranolazine) is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white solid. Ranolazine is soluble in dichloromethane and methanol; sparingly soluble in tetrahydrofuran, ethanol, acetonitrile, and acetone; slightly soluble in ethyl acetate, isopropanol, toluene, and ethyl ether; and very slightly soluble in water. RANEXA tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, methacrylic acid copolymer (Type C), microcrystalline cellulose, polyethylene glycol, sodium hydroxide, and titanium dioxide. Additional inactive ingredients for the 500 mg tablet include polyvinyl alcohol, talc, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include lactose monohydrate, triacetin, and Iron Oxide Yellow."
},
{
"NDCCode": "61958-2002-2",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (61958-2002-2) ",
"NDC11Code": "61958-2002-02",
"ProductNDC": "61958-2002",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Descovy",
"NonProprietaryName": "Emtricitabine And Tenofovir Alafenamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20160404",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208215",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "EMTRICITABINE; TENOFOVIR ALAFENAMIDE FUMARATE",
"StrengthNumber": "200; 25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2026-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200122",
"SamplePackage": "N",
"IndicationAndUsage": "HIV-1 Treatment (1.1). DESCOVY is a two-drug combination of emtricitabine (FTC) and tenofovir alafenamide (TAF), both HIV nucleoside analog reverse transcriptase inhibitors (NRTIs), and is indicated: 1 in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and adolescent patients weighing at least 35 kg., 2 for the treatment of HIV-1 infection in pediatric patients weighing at least 14 kg to less than 35 kg in combination with other antiretroviral agents, including darunavir and cobicistat but not other protease inhibitors that require a CYP3A inhibitor.",
"Description": "DESCOVY (emtricitabine and tenofovir alafenamide) is a fixed dose combination tablet containing emtricitabine (FTC) and tenofovir alafenamide (TAF) for oral administration. : 1 FTC, a synthetic nucleoside analog of cytidine, is an HIV nucleoside analog reverse transcriptase inhibitor (HIV NRTI)., 2 TAF, an HIV NRTI, is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5′-monophosphate."
},
{
"NDCCode": "61958-2501-2",
"PackageDescription": "7 TABLET in 1 BOTTLE, PLASTIC (61958-2501-2) ",
"NDC11Code": "61958-2501-02",
"ProductNDC": "61958-2501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Biktarvy",
"NonProprietaryName": "Bictegravir Sodium, Emtricitabine, And Tenofovir Alafenamide Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20180207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210251",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "BICTEGRAVIR SODIUM; EMTRICITABINE; TENOFOVIR ALAFENAMIDE FUMARATE",
"StrengthNumber": "50; 200; 25",
"StrengthUnit": "mg/1; mg/1; mg/1",
"Pharm_Classes": "Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS], Nucleosides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180726",
"SamplePackage": "N",
"IndicationAndUsage": "BIKTARVY is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adults and pediatric patients weighing at least 14 kg: : 1 with no antiretroviral treatment history, or, 2 with an antiretroviral treatment history and not virologically suppressed, with no known or suspected substitutions associated with resistance to the integrase strand inhibitor class, emtricitabine, or tenofovir, or, 3 to replace the current antiretroviral regimen in those who are virologically-suppressed (HIV-1 RNA less than 50 copies per mL) on a stable antiretroviral regimen with no known or suspected substitutions associated with resistance to bictegravir or tenofovir [see Dosage and Administration (2.4), and Use in Specific Populations (8.1)].",
"Description": "BIKTARVY (bictegravir, emtricitabine, and tenofovir alafenamide) is a fixed dose combination tablet containing bictegravir (BIC), emtricitabine (FTC), and tenofovir alafenamide (TAF) for oral administration. : 1 BIC is an integrase strand transfer inhibitor (INSTI)., 2 FTC, a synthetic nucleoside analog of cytidine, is an HIV nucleoside analog reverse transcriptase inhibitor (HIV NRTI)., 3 TAF, an HIV NRTI, is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5′-monophosphate."
},
{
"NDCCode": "61958-2901-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61958-2901-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61958-2901-02",
"ProductNDC": "61958-2901",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Veklury",
"NonProprietaryName": "Remdesivir",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20201101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214787",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "REMDESIVIR",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "SARS-CoV-2 Nucleotide Analog RNA Polymerase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201101",
"SamplePackage": "N",
"IndicationAndUsage": "VEKLURY is indicated for the treatment of coronavirus disease 2019 (COVID-19) in adults and pediatric patients (birth to less than 18 years of age weighing at least 1.5 kg) who are [see Clinical Studies (14)]: : 1 Hospitalized, or, 2 Not hospitalized and have mild-to-moderate COVID-19, and are at high risk for progression to severe COVID-19, including hospitalization or death.",
"Description": "VEKLURY contains remdesivir, a SARS-CoV-2 nucleotide analog RNA polymerase inhibitor. The chemical name for remdesivir is 2-ethylbutyl N-{(S)-[2-C-(4-aminopyrrolo[2,1-f][1,2,4]triazin-7-yl)-2,5-anhydro-d-altrononitril-6-O-yl]phenoxyphosphoryl}-L-alaninate. It has a molecular formula of C27H35N6O8P and a molecular weight of 602.6 g/mol. Remdesivir has the following structural formula. VEKLURY for injection contains 100 mg of remdesivir as a sterile, preservative-free lyophilized white to off-white to yellow powder in a single-dose clear glass vial. It requires reconstitution and then further dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5)]. The inactive ingredients are 3 g betadex sulfobutyl ether sodium and may include hydrochloric acid and/or sodium hydroxide for pH adjustment."
},
{
"NDCCode": "61958-2902-2",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (61958-2902-2) / 20 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "61958-2902-02",
"ProductNDC": "61958-2902",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Veklury",
"NonProprietaryName": "Remdesivir",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220325",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA214787",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "REMDESIVIR",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "SARS-CoV-2 Nucleotide Analog RNA Polymerase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-10-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220325",
"SamplePackage": "N",
"IndicationAndUsage": "VEKLURY is indicated for the treatment of coronavirus disease 2019 (COVID-19) in adults and pediatric patients (birth to less than 18 years of age weighing at least 1.5 kg) who are [see Clinical Studies (14)]: : 1 Hospitalized, or, 2 Not hospitalized and have mild-to-moderate COVID-19, and are at high risk for progression to severe COVID-19, including hospitalization or death.",
"Description": "VEKLURY contains remdesivir, a SARS-CoV-2 nucleotide analog RNA polymerase inhibitor. The chemical name for remdesivir is 2-ethylbutyl N-{(S)-[2-C-(4-aminopyrrolo[2,1-f][1,2,4]triazin-7-yl)-2,5-anhydro-d-altrononitril-6-O-yl]phenoxyphosphoryl}-L-alaninate. It has a molecular formula of C27H35N6O8P and a molecular weight of 602.6 g/mol. Remdesivir has the following structural formula. VEKLURY for injection contains 100 mg of remdesivir as a sterile, preservative-free lyophilized white to off-white to yellow powder in a single-dose clear glass vial. It requires reconstitution and then further dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5, 2.6)]. The inactive ingredients are 3 g betadex sulfobutyl ether sodium and may include hydrochloric acid and/or sodium hydroxide for pH adjustment. VEKLURY injection contains 100 mg/20 mL (5 mg/mL) of remdesivir as a sterile, preservative-free, clear, colorless to yellow solution in a single-dose clear glass vial. It requires dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5, 2.6)]. The inactive ingredients are 6 g betadex sulfobutyl ether sodium, Water for Injection, USP, and may include hydrochloric acid and/or sodium hydroxide for pH adjustment."
},
{
"NDCCode": "61958-3001-2",
"PackageDescription": "1 POUCH in 1 CARTON (61958-3001-2) / 1 BLISTER PACK in 1 POUCH / 5 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "61958-3001-02",
"ProductNDC": "61958-3001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sunlenca",
"NonProprietaryName": "Lenacapavir Sodium",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20221222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215974",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "LENACAPAVIR SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Capsid Inhibitors [MoA], Human Immunodeficiency Virus 1 Capsid Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20221222",
"SamplePackage": "N",
"IndicationAndUsage": "SUNLENCA, a human immunodeficiency virus type 1 (HIV-1) capsid inhibitor, is indicated: 1 in combination with other antiretroviral(s), for the treatment of HIV-1 infection in heavily treatment-experienced adults with multidrug resistant HIV-1 whose current antiretroviral regimen is failing due to resistance, intolerance, or safety considerations. (1.1), 2 for oral loading as a component of the initiation regimen for BIXLENVO (bictegravir [BIC]/lenacapavir [LEN]), a complete regimen for the treatment of HIV-1 infection, in adults to replace the current antiretroviral regimen in those who are virologically suppressed (HIV-1 RNA less than 50 copies per mL) on a stable antiretroviral regimen with no known or suspected resistance to the individual components of BIXLENVO. (1.2).",
"Description": "SUNLENCA tablets and SUNLENCA injection contain lenacapavir sodium, a capsid inhibitor. The chemical name of lenacapavir sodium is: Sodium (4-chloro-7-(2-((S)-1-(2-((3bS,4aR)-5,5-difluoro-3-(trifluoromethyl)-3b,4,4a,5-tetrahydro-1H-cyclopropa[3,4]cyclopenta[1,2-c]pyrazol-1-yl)acetamido)-2-(3,5-difluorophenyl)ethyl)-6-(3-methyl-3-(methylsulfonyl)but-1-yn-1-yl)pyridin-3-yl)-1-(2,2,2-trifluoroethyl)-1H-indazol-3-yl)(methylsulfonyl)amide. Lenacapavir sodium has a molecular formula of C39H31ClF10N7NaO5S2, a molecular weight of 990.3, and the following structural formula. Lenacapavir sodium is a light yellow to yellow solid and is practically insoluble in water."
},
{
"NDCCode": "61958-3104-1",
"PackageDescription": "30 VIAL, SINGLE-DOSE in 1 CARTON (61958-3104-1) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (61958-3104-2) ",
"NDC11Code": "61958-3104-01",
"ProductNDC": "61958-3104",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hepcludex",
"NonProprietaryName": "Bulevirtide",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20260522",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761468",
"LabelerName": "Gilead Sciences, Inc.",
"SubstanceName": "BULEVIRTIDE ACETATE",
"StrengthNumber": "8.5",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260522",
"SamplePackage": "N",
"IndicationAndUsage": "HEPCLUDEX is indicated for the treatment of chronic hepatitis delta virus (HDV) infection in adults without cirrhosis or with compensated cirrhosis. This indication is approved under accelerated approval based on a decrease in HDV RNA and alanine aminotransferase (ALT) normalization [see Clinical Studies (14)]. An improvement in disease-related clinical outcomes has not been established. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s).",
"Description": "Bulevirtide-gmod is an NTCP-directed HDV attachment inhibitor. Bulevirtide as an acetate salt, is a 47-amino acid protein with a fatty acid myristoyl residue at the N-terminus and an amidated C-terminus. All chiral amino acids are in the L-configuration. The counter ion acetate is bound in ionic form to basic groups of the peptide molecule in a nonstoichiometric ratio. Bulevirtide acetate has a molecular formula of C248H355N65O72 (net) and a molecular weight of 5398.9 Da (average mass, net), and has the following structural formula. HEPCLUDEX (bulevirtide-gmod) for injection is a sterile, preservative-free, white to off-white lyophilized powder or cake for subcutaneous injection after reconstitution. Each single-dose vial delivers 8.5 mg of bulevirtide-gmod (equivalent to approximately 8.6 mg of bulevirtide acetate). The inactive ingredients are histidine (3.3 mg), mannitol (51 mg), and sucrose (8.5 mg), and may include hydrochloric acid and/or sodium hydroxide to adjust the pH to 8.5. HEPCLUDEX requires reconstitution prior to administration by subcutaneous injection [see Dosage and Administration (2.2)]."
},
{
"NDCCode": "0093-3301-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (0093-3301-01) ",
"NDC11Code": "00093-3301-01",
"ProductNDC": "0093-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075977",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240917",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including tramadol hydrochloride tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol hydrochloride. Its structural formula is. C16H25NO2HCl M.W. 299.84. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP (equivalent to 43.9 mg of tramadol) and are white in color. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 4000, pregelatinized corn starch, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "0093-3301-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (0093-3301-05) ",
"NDC11Code": "00093-3301-05",
"ProductNDC": "0093-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tramadol Hydrochloride",
"NonProprietaryName": "Tramadol Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240912",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075977",
"LabelerName": "Teva Pharmaceuticals USA, Inc.",
"SubstanceName": "TRAMADOL HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240912",
"SamplePackage": "N",
"IndicationAndUsage": "Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including tramadol hydrochloride tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol hydrochloride. Its structural formula is. C16H25NO2HCl M.W. 299.84. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP (equivalent to 43.9 mg of tramadol) and are white in color. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 4000, pregelatinized corn starch, sodium starch glycolate, and titanium dioxide."
},
{
"NDCCode": "0264-3301-10",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER",
"NDC11Code": "00264-3301-10",
"ProductNDC": "0264-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium In Sodium Chloride",
"NonProprietaryName": "Heparin Sodium In Sodium Chloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250718",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019953",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250718",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector."
},
{
"NDCCode": "0409-3301-10",
"PackageDescription": "10 VIAL in 1 CARTON (0409-3301-10) / 20 mL in 1 VIAL (0409-3301-01) ",
"NDC11Code": "00409-3301-10",
"ProductNDC": "0409-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Precedex",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220307",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021038",
"LabelerName": "Hospira, Inc.",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220307",
"SamplePackage": "N",
"Description": "PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 ∙ HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "15054-3301-1",
"PackageDescription": "1 BOTTLE in 1 CARTON (15054-3301-1) / 30 CAPSULE, COATED PELLETS in 1 BOTTLE",
"NDC11Code": "15054-3301-01",
"ProductNDC": "15054-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bylvay",
"NonProprietaryName": "Odevixibat",
"DosageFormName": "CAPSULE, COATED PELLETS",
"RouteName": "ORAL",
"StartMarketingDate": "20240110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215498",
"LabelerName": "Ipsen Biopharmaceuticals, Inc.",
"SubstanceName": "ODEVIXIBAT",
"StrengthNumber": "200",
"StrengthUnit": "ug/1",
"Pharm_Classes": "Ileal Bile Acid Transporter Inhibitor [EPC], Ileal Bile Acid Transporter Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240110",
"SamplePackage": "N",
"IndicationAndUsage": "BYLVAY is an ileal bile acid transporter (IBAT) inhibitor indicated for:. Progressive Familial Intrahepatic Cholestasis (PFIC): 1 the treatment of pruritus in patients 3 months of age and older with progressive familial intrahepatic cholestasis (PFIC). (1.1).",
"Description": "The active ingredient in BYLVAY (odevixibat) capsules and BYLVAY (odevixibat) oral pellets, an ileal bile acid transporter (IBAT) inhibitor, is (2S)-2-{[(2R)-2-(2-{[3,3-dibutyl-7-(methylsulfanyl)-1,1-dioxo-5-phenyl-2,3,4,5-tetrahydro-1H-1λ6,2,5-benzothiadiazepin-8yl]oxy}acetamido)-2-(4-hydroxyphenyl)acetly]amino}butanoic acid, which is formulated as the sesquihydrate having the following chemical structure:. The molecular formula is C37H48N4O8S2 × 1.5 H2O, with a molecular weight of 768.0 g/mol (anhydrous 740.9 g/mol). Odevixibat sesquihydrate is a white to off-white solid. Its solubility in aqueous solutions is pH-dependent and increases with increased pH. BYLVAY is available for oral administration as oral pellets containing odevixibat sesquihydrate equivalent to 200 mcg or 600 mcg of odevixibat, and as capsules containing odevixibat sesquihydrate equivalent to 400 mcg or 1200 mcg of odevixibat, and the following excipients: hypromellose and microcrystalline cellulose. The capsule shells for the oral pellets contain hypromellose, titanium dioxide and yellow iron oxide. The capsule shells for the capsules contain hypromellose, red iron oxide, titanium dioxide and yellow iron oxide. The imprinting ink contains ferrosoferric oxide/black iron oxide and shellac glaze."
},
{
"NDCCode": "0363-3301-52",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (0363-3301-52) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "00363-3301-52",
"ProductNDC": "0363-3301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nasal Decongestant D",
"NonProprietaryName": "Pseudoephedrine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075153",
"LabelerName": "Walgreen Company",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220406",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure."
},
{
"NDCCode": "0363-3301-60",
"PackageDescription": "20 BLISTER PACK in 1 CARTON (0363-3301-60) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "00363-3301-60",
"ProductNDC": "0363-3301",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nasal Decongestant D",
"NonProprietaryName": "Pseudoephedrine Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220406",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075153",
"LabelerName": "Walgreen Company",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220406",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure."
},
{
"NDCCode": "0548-3301-00",
"PackageDescription": "10 SYRINGE in 1 PACKAGE (0548-3301-00) > 50 mL in 1 SYRINGE",
"NDC11Code": "00548-3301-00",
"ProductNDC": "0548-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose Monohydrate",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION",
"RouteName": "PARENTERAL",
"StartMarketingDate": "20000601",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Amphastar Pharmaceuticals, Inc.",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2016-12-06"
},
{
"NDCCode": "0703-3301-04",
"PackageDescription": "25 VIAL, SINGLE-USE in 1 TRAY (0703-3301-04) / 1 mL in 1 VIAL, SINGLE-USE (0703-3301-01) ",
"NDC11Code": "00703-3301-04",
"ProductNDC": "0703-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Octreotide Acetate",
"NonProprietaryName": "Octreotide Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20051114",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075957",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "OCTREOTIDE ACETATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20051114",
"SamplePackage": "N"
},
{
"NDCCode": "0781-3301-95",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (0781-3301-95) > 1 INJECTION in 1 VIAL, SINGLE-DOSE (0781-3301-85)",
"NDC11Code": "00781-3301-95",
"ProductNDC": "0781-3301",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20101221",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090291",
"LabelerName": "Sandoz Inc",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-08-02"
},
{
"NDCCode": "10106-3301-1",
"PackageDescription": "49.9 kg in 1 DRUM (10106-3301-1) ",
"NDC11Code": "10106-3301-01",
"ProductNDC": "10106-3301",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "GRANULE",
"StartMarketingDate": "20180626",
"EndMarketingDate": "20250124",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Avantor Performance Materials International, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"StartMarketingDatePackage": "26-JUN-18",
"EndMarketingDatePackage": "24-JAN-25"
},
{
"NDCCode": "11054-005-31",
"PackageDescription": "3301 L in 1 CYLINDER (11054-005-31) ",
"NDC11Code": "11054-0005-31",
"ProductNDC": "11054-005",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrogen",
"ProprietaryNameSuffix": "Compressed, Nf",
"NonProprietaryName": "Nitrogen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19971106",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205839",
"LabelerName": "AIRGAS USA, LLC",
"SubstanceName": "NITROGEN",
"StrengthNumber": "992",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2026-06-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19971106",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>61958-3301-2</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (61958-3301-2) </PackageDescription>
<NDC11Code>61958-3301-02</NDC11Code>
<ProductNDC>61958-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Livdelzi</ProprietaryName>
<NonProprietaryName>Seladelpar Lysine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240814</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217899</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc</LabelerName>
<SubstanceName>SELADELPAR LYSINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIVDELZI is indicated for the treatment of primary biliary cholangitis (PBC) in combination with ursodeoxycholic acid (UDCA) in adults who have had an inadequate response to UDCA, or as monotherapy in patients unable to tolerate UDCA. This indication is approved under accelerated approval based on a reduction of alkaline phosphatase (ALP) [see Clinical Studies (14)]. Improvement in survival or prevention of liver decompensation events have not been demonstrated. Continued approval for this indication may be contingent upon verification and description of clinical benefit in confirmatory trial(s).</IndicationAndUsage>
<Description>LIVDELZI capsules contain seladelpar lysine, a peroxisome proliferator-activated receptor (PPAR)-delta (δ) agonist. Seladelpar is a single enantiomer of the R-configuration and is present as a lysine dihydrate salt. Seladelpar lysine dihydrate is a white to off-white powder with a molecular formula of C21H23F3O5S ∙C6H14N2O2 ∙2H2O and a molecular weight of 626.7 g/mol. Its solubility in water is pH dependent. It is slightly soluble at low pH and very soluble at high pH. The chemical name for seladelpar lysine dihydrate is 2-[4-[[(2R)-2-ethoxy-3-[4-(trifluoromethyl)phenoxy]propyl]thio]-2-methylphenoxy]acetic acid, lysine dihydrate, and the chemical structure is. LIVDELZI (seladelpar) capsules are supplied in a 10 mg strength for oral administration. Each capsule contains 14.1 mg of seladelpar lysine and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, and hard gelatin shells. The light gray opaque (body)/dark blue opaque (cap) capsule shells contain gelatin, titanium dioxide, black iron oxide, yellow iron oxide, red iron oxide and the colorant FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>61958-3301-1</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (61958-3301-1) </PackageDescription>
<NDC11Code>61958-3301-01</NDC11Code>
<ProductNDC>61958-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Livdelzi</ProprietaryName>
<NonProprietaryName>Seladelpar Lysine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240814</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA217899</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc</LabelerName>
<SubstanceName>SELADELPAR LYSINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LIVDELZI is indicated for the treatment of primary biliary cholangitis (PBC) in combination with ursodeoxycholic acid (UDCA) in adults who have had an inadequate response to UDCA, or as monotherapy in patients unable to tolerate UDCA. This indication is approved under accelerated approval based on a reduction of alkaline phosphatase (ALP) [see Clinical Studies (14)]. Improvement in survival or prevention of liver decompensation events have not been demonstrated. Continued approval for this indication may be contingent upon verification and description of clinical benefit in confirmatory trial(s).</IndicationAndUsage>
<Description>LIVDELZI capsules contain seladelpar lysine, a peroxisome proliferator-activated receptor (PPAR)-delta (δ) agonist. Seladelpar is a single enantiomer of the R-configuration and is present as a lysine dihydrate salt. Seladelpar lysine dihydrate is a white to off-white powder with a molecular formula of C21H23F3O5S ∙C6H14N2O2 ∙2H2O and a molecular weight of 626.7 g/mol. Its solubility in water is pH dependent. It is slightly soluble at low pH and very soluble at high pH. The chemical name for seladelpar lysine dihydrate is 2-[4-[[(2R)-2-ethoxy-3-[4-(trifluoromethyl)phenoxy]propyl]thio]-2-methylphenoxy]acetic acid, lysine dihydrate, and the chemical structure is. LIVDELZI (seladelpar) capsules are supplied in a 10 mg strength for oral administration. Each capsule contains 14.1 mg of seladelpar lysine and the following inactive ingredients: butylated hydroxytoluene, colloidal silicon dioxide, croscarmellose sodium, magnesium stearate, mannitol, microcrystalline cellulose, and hard gelatin shells. The light gray opaque (body)/dark blue opaque (cap) capsule shells contain gelatin, titanium dioxide, black iron oxide, yellow iron oxide, red iron oxide and the colorant FD&C Blue #2.</Description>
</NDC>
<NDC>
<NDCCode>10106-3301-2</NDCCode>
<PackageDescription>158.76 kg in 1 DRUM (10106-3301-2) </PackageDescription>
<NDC11Code>10106-3301-02</NDC11Code>
<ProductNDC>10106-3301</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<StartMarketingDate>20180626</StartMarketingDate>
<EndMarketingDate>20250124</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Avantor Performance Materials International, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>26-JUN-18</StartMarketingDatePackage>
<EndMarketingDatePackage>24-JAN-25</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>36987-3301-2</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (36987-3301-2)</PackageDescription>
<NDC11Code>36987-3301-02</NDC11Code>
<ProductNDC>36987-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Palmers Amaranth</ProprietaryName>
<NonProprietaryName>Palmers Amaranth</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRADERMAL; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720829</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA102192</ApplicationNumber>
<LabelerName>Nelco Laboratories, Inc.</LabelerName>
<SubstanceName>AMARANTHUS PALMERI POLLEN</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[PNU]/mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Pollen Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Pollen [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Allergenic extracts are indicated for use in diagnostic testing and as part of a treatment regime for allergic disease, as established by allergy history and skin test reactivity. Allergenic extracts are indicated for the treatment of allergen specific allergic disease for use as hyposensitization or immunotherapy when avoidance of specific allergens can not be attained. The use of allergenic extracts for therapeutic purpose has been established by well-controlled clinical studies. Allergenic extracts may be used as adjunctive therapy along with pharmacotherapy which includes antihistamines, corticosteroids, and cromoglycate, and avoidance measures. Allergenic extracts for therapeutic use should be given using only the allergen selection to which the patient is allergic, has a history of exposure and are likely to be exposed to again.</IndicationAndUsage>
<Description>Allergenic extracts are sterile solutions consisting of the extractable components from various biological sources including pollens, inhalants, molds, animal epidermals and insects. Aqueous extracts are prepared using cocas fluid containing NaCl 0.5%, NaHCO3 0.0275%, WFI, preservative 0.4% Phenol. Glycerinated allergenic extracts are prepared with cocas fluid and glycerin to produce a 50% (v/v) allergenic extract. Allergenic Extracts are supplied as concentrations designated as protein nitrogen units (PNU) or weight/volume (w/v) ratio. Standardized extracts are designated in Bioequivalent Allergy Units (BAU) or Allergy Units (AU). (See product insert for standardized extracts). For diagnostic purposes, allergenic extracts are to be administered by prick-puncture or intradermal routes. Allergenic extracts are administered subcutaneously for immunotherapy injections.</Description>
</NDC>
<NDC>
<NDCCode>37662-3301-2</NDCCode>
<PackageDescription>500 PELLET in 1 VIAL, GLASS (37662-3301-2) </PackageDescription>
<NDC11Code>37662-3301-02</NDC11Code>
<ProductNDC>37662-3301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Quercus Rubra Glandium</ProprietaryName>
<NonProprietaryName>Quercus Rubra Glandium</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230602</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, INC.</LabelerName>
<SubstanceName>QUERCUS RUBRA WHOLE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>55346-3301-2</NDCCode>
<PackageDescription>236 mL in 1 BOTTLE, SPRAY (55346-3301-2) </PackageDescription>
<NDC11Code>55346-3301-02</NDC11Code>
<ProductNDC>55346-3301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>San-ez</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol Antiseptic 75% Topical Solution</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200325</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Dental Technologies, Inc.</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-11-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63629-3301-2</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (63629-3301-2)</PackageDescription>
<NDC11Code>63629-3301-02</NDC11Code>
<ProductNDC>63629-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Celebrex</ProprietaryName>
<NonProprietaryName>Celecoxib</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981002</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020998</ApplicationNumber>
<LabelerName>Bryant Ranch Prepack</LabelerName>
<SubstanceName>CELECOXIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-30</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>61958-0801-2</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (61958-0801-2) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>61958-0801-02</NDC11Code>
<ProductNDC>61958-0801</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Letairis</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022081</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Letairis is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Letairis contains ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1 Ambrisentan Structural Formula. Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Letairis is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each square, pale pink Letairis tablet contains 5 mg of ambrisentan. Each oval, deep pink Letairis tablet contains 10 mg of ambrisentan. Letairis tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>61958-0802-2</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (61958-0802-2) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>61958-0802-02</NDC11Code>
<ProductNDC>61958-0802</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Letairis</ProprietaryName>
<NonProprietaryName>Ambrisentan</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022081</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>AMBRISENTAN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Endothelin Receptor Antagonist [EPC], Endothelin Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20070615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Letairis is indicated for the treatment of pulmonary arterial hypertension (PAH) (WHO Group 1) in adult patients: 1 To improve exercise ability and delay clinical worsening. , 2 In combination with tadalafil to reduce the risks of disease progression and hospitalization for worsening PAH, and to improve exercise ability [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Letairis contains ambrisentan, an endothelin receptor antagonist. The chemical name of ambrisentan is (+)-(2S)-2-[(4,6-dimethylpyrimidin-2-yl)oxy]-3-methoxy-3,3-diphenylpropanoic acid. It has a molecular formula of C22H22N2O4 and a molecular weight of 378.42 and has the following structural formula:. Figure 1 Ambrisentan Structural Formula. Ambrisentan is a white to off-white, crystalline solid. It is a carboxylic acid with a pKa of 4.0. Ambrisentan is practically insoluble in water and in aqueous solutions at low pH. Solubility increases in aqueous solutions at higher pH. In the solid state ambrisentan is very stable, is not hygroscopic, and is not light sensitive. Letairis is available as 5 mg and 10 mg film-coated tablets for once daily oral administration. The tablets include the following inactive ingredients: croscarmellose sodium, lactose monohydrate, magnesium stearate and microcrystalline cellulose. The tablets are film-coated with a coating material containing FD&C Red #40 aluminum lake, lecithin, polyethylene glycol, polyvinyl alcohol, talc, and titanium dioxide. Each square, pale pink Letairis tablet contains 5 mg of ambrisentan. Each oval, deep pink Letairis tablet contains 10 mg of ambrisentan. Letairis tablets are unscored.</Description>
</NDC>
<NDC>
<NDCCode>61958-0901-1</NDCCode>
<PackageDescription>2 CARTON in 1 PACKAGE (61958-0901-1) / 1 KIT in 1 CARTON * 1 mL in 1 VIAL * 1 mL in 1 AMPULE</PackageDescription>
<NDC11Code>61958-0901-01</NDC11Code>
<ProductNDC>61958-0901</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cayston</ProprietaryName>
<NonProprietaryName>Aztreonam</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20100222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050814</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CAYSTON® is indicated to improve respiratory symptoms in cystic fibrosis (CF) patients with Pseudomonas aeruginosa. Safety and effectiveness have not been established in pediatric patients below the age of 7 years, patients with FEV1 <25% or >75% predicted, or patients colonized with Burkholderia cepacia [see Clinical Studies (14)]. To reduce the development of drug-resistant bacteria and maintain the effectiveness of CAYSTON and other antibacterial drugs, CAYSTON should be used only to treat patients with CF known to have Pseudomonas aeruginosa in the lungs.</IndicationAndUsage>
<Description>A dose of CAYSTON consists of a 2 mL amber glass vial containing lyophilized aztreonam (75 mg) and lysine (46.7 mg), and a low-density polyethylene ampule containing 1 mL sterile diluent (0.17% sodium chloride). The reconstituted solution is for inhalation. The formulation contains no preservatives or arginine. The active ingredient in CAYSTON is aztreonam, a monobactam antibacterial. The monobactams are structurally different from beta-lactam antibiotics (e.g., penicillins, cephalosporins, carbapenems) due to a monocyclic nucleus. This nucleus contains several side chains; sulfonic acid in the 1-position activates the nucleus, an aminothiazolyl oxime side chain in the 3-position confers specificity for aerobic Gram-negative bacteria including Pseudomonas spp., and a methyl group in the 4-position enhances beta-lactamase stability. Aztreonam is designated chemically as (Z)-2-[[[(2-amino-4-thiazolyl)[[(2S,3S)-2-methyl-4-oxo-1-sulfo-3-azetidinyl]carbamoyl]methylene]amino]oxy]-2-methylpropionic acid. The structural formula is presented below. CAYSTON is a white to off-white powder. CAYSTON is sterile, hygroscopic, and light sensitive. Once reconstituted with the supplied diluent, the pH range is 4.5 to 6.0.</Description>
</NDC>
<NDC>
<NDCCode>61958-1003-2</NDCCode>
<PackageDescription>14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (61958-1003-2) </PackageDescription>
<NDC11Code>61958-1003-02</NDC11Code>
<ProductNDC>61958-1003</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranexa</ProprietaryName>
<NonProprietaryName>Ranolazine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060127</StartMarketingDate>
<EndMarketingDate>20231231</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021526</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>RANOLAZINE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060127</StartMarketingDatePackage>
<EndMarketingDatePackage>20231231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>RANEXA® is indicated for the treatment of chronic angina. RANEXA may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.</IndicationAndUsage>
<Description>RANEXA (ranolazine) is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white solid. Ranolazine is soluble in dichloromethane and methanol; sparingly soluble in tetrahydrofuran, ethanol, acetonitrile, and acetone; slightly soluble in ethyl acetate, isopropanol, toluene, and ethyl ether; and very slightly soluble in water. RANEXA tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, methacrylic acid copolymer (Type C), microcrystalline cellulose, polyethylene glycol, sodium hydroxide, and titanium dioxide. Additional inactive ingredients for the 500 mg tablet include polyvinyl alcohol, talc, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include lactose monohydrate, triacetin, and Iron Oxide Yellow.</Description>
</NDC>
<NDC>
<NDCCode>61958-1004-2</NDCCode>
<PackageDescription>14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (61958-1004-2) </PackageDescription>
<NDC11Code>61958-1004-02</NDC11Code>
<ProductNDC>61958-1004</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranexa</ProprietaryName>
<NonProprietaryName>Ranolazine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070212</StartMarketingDate>
<EndMarketingDate>20240131</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021526</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>RANOLAZINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20070212</StartMarketingDatePackage>
<EndMarketingDatePackage>20240131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>RANEXA® is indicated for the treatment of chronic angina. RANEXA may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.</IndicationAndUsage>
<Description>RANEXA (ranolazine) is available as a film-coated, non-scored, extended-release tablet for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N-(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has an empirical formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is a white to off-white solid. Ranolazine is soluble in dichloromethane and methanol; sparingly soluble in tetrahydrofuran, ethanol, acetonitrile, and acetone; slightly soluble in ethyl acetate, isopropanol, toluene, and ethyl ether; and very slightly soluble in water. RANEXA tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: carnauba wax, hypromellose, magnesium stearate, methacrylic acid copolymer (Type C), microcrystalline cellulose, polyethylene glycol, sodium hydroxide, and titanium dioxide. Additional inactive ingredients for the 500 mg tablet include polyvinyl alcohol, talc, Iron Oxide Yellow, and Iron Oxide Red; additional inactive ingredients for the 1000 mg tablet include lactose monohydrate, triacetin, and Iron Oxide Yellow.</Description>
</NDC>
<NDC>
<NDCCode>61958-2002-2</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (61958-2002-2) </PackageDescription>
<NDC11Code>61958-2002-02</NDC11Code>
<ProductNDC>61958-2002</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Descovy</ProprietaryName>
<NonProprietaryName>Emtricitabine And Tenofovir Alafenamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160404</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208215</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>EMTRICITABINE; TENOFOVIR ALAFENAMIDE FUMARATE</SubstanceName>
<StrengthNumber>200; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200122</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HIV-1 Treatment (1.1). DESCOVY is a two-drug combination of emtricitabine (FTC) and tenofovir alafenamide (TAF), both HIV nucleoside analog reverse transcriptase inhibitors (NRTIs), and is indicated: 1 in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and adolescent patients weighing at least 35 kg., 2 for the treatment of HIV-1 infection in pediatric patients weighing at least 14 kg to less than 35 kg in combination with other antiretroviral agents, including darunavir and cobicistat but not other protease inhibitors that require a CYP3A inhibitor.</IndicationAndUsage>
<Description>DESCOVY (emtricitabine and tenofovir alafenamide) is a fixed dose combination tablet containing emtricitabine (FTC) and tenofovir alafenamide (TAF) for oral administration. : 1 FTC, a synthetic nucleoside analog of cytidine, is an HIV nucleoside analog reverse transcriptase inhibitor (HIV NRTI)., 2 TAF, an HIV NRTI, is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5′-monophosphate.</Description>
</NDC>
<NDC>
<NDCCode>61958-2501-2</NDCCode>
<PackageDescription>7 TABLET in 1 BOTTLE, PLASTIC (61958-2501-2) </PackageDescription>
<NDC11Code>61958-2501-02</NDC11Code>
<ProductNDC>61958-2501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Biktarvy</ProprietaryName>
<NonProprietaryName>Bictegravir Sodium, Emtricitabine, And Tenofovir Alafenamide Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210251</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>BICTEGRAVIR SODIUM; EMTRICITABINE; TENOFOVIR ALAFENAMIDE FUMARATE</SubstanceName>
<StrengthNumber>50; 200; 25</StrengthNumber>
<StrengthUnit>mg/1; mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Hepatitis B Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Human Immunodeficiency Virus Nucleoside Analog Reverse Transcriptase Inhibitor [EPC], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleoside Reverse Transcriptase Inhibitors [MoA], Nucleosides [CS], Nucleosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180726</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BIKTARVY is indicated as a complete regimen for the treatment of human immunodeficiency virus type 1 (HIV-1) infection in adults and pediatric patients weighing at least 14 kg: : 1 with no antiretroviral treatment history, or, 2 with an antiretroviral treatment history and not virologically suppressed, with no known or suspected substitutions associated with resistance to the integrase strand inhibitor class, emtricitabine, or tenofovir, or, 3 to replace the current antiretroviral regimen in those who are virologically-suppressed (HIV-1 RNA less than 50 copies per mL) on a stable antiretroviral regimen with no known or suspected substitutions associated with resistance to bictegravir or tenofovir [see Dosage and Administration (2.4), and Use in Specific Populations (8.1)].</IndicationAndUsage>
<Description>BIKTARVY (bictegravir, emtricitabine, and tenofovir alafenamide) is a fixed dose combination tablet containing bictegravir (BIC), emtricitabine (FTC), and tenofovir alafenamide (TAF) for oral administration. : 1 BIC is an integrase strand transfer inhibitor (INSTI)., 2 FTC, a synthetic nucleoside analog of cytidine, is an HIV nucleoside analog reverse transcriptase inhibitor (HIV NRTI)., 3 TAF, an HIV NRTI, is converted in vivo to tenofovir, an acyclic nucleoside phosphonate (nucleotide) analog of adenosine 5′-monophosphate.</Description>
</NDC>
<NDC>
<NDCCode>61958-2901-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61958-2901-2) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61958-2901-02</NDC11Code>
<ProductNDC>61958-2901</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Veklury</ProprietaryName>
<NonProprietaryName>Remdesivir</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20201101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214787</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>REMDESIVIR</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>SARS-CoV-2 Nucleotide Analog RNA Polymerase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VEKLURY is indicated for the treatment of coronavirus disease 2019 (COVID-19) in adults and pediatric patients (birth to less than 18 years of age weighing at least 1.5 kg) who are [see Clinical Studies (14)]: : 1 Hospitalized, or, 2 Not hospitalized and have mild-to-moderate COVID-19, and are at high risk for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>VEKLURY contains remdesivir, a SARS-CoV-2 nucleotide analog RNA polymerase inhibitor. The chemical name for remdesivir is 2-ethylbutyl N-{(S)-[2-C-(4-aminopyrrolo[2,1-f][1,2,4]triazin-7-yl)-2,5-anhydro-d-altrononitril-6-O-yl]phenoxyphosphoryl}-L-alaninate. It has a molecular formula of C27H35N6O8P and a molecular weight of 602.6 g/mol. Remdesivir has the following structural formula. VEKLURY for injection contains 100 mg of remdesivir as a sterile, preservative-free lyophilized white to off-white to yellow powder in a single-dose clear glass vial. It requires reconstitution and then further dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5)]. The inactive ingredients are 3 g betadex sulfobutyl ether sodium and may include hydrochloric acid and/or sodium hydroxide for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>61958-2902-2</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (61958-2902-2) / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>61958-2902-02</NDC11Code>
<ProductNDC>61958-2902</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Veklury</ProprietaryName>
<NonProprietaryName>Remdesivir</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220325</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA214787</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>REMDESIVIR</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>SARS-CoV-2 Nucleotide Analog RNA Polymerase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-10-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>VEKLURY is indicated for the treatment of coronavirus disease 2019 (COVID-19) in adults and pediatric patients (birth to less than 18 years of age weighing at least 1.5 kg) who are [see Clinical Studies (14)]: : 1 Hospitalized, or, 2 Not hospitalized and have mild-to-moderate COVID-19, and are at high risk for progression to severe COVID-19, including hospitalization or death.</IndicationAndUsage>
<Description>VEKLURY contains remdesivir, a SARS-CoV-2 nucleotide analog RNA polymerase inhibitor. The chemical name for remdesivir is 2-ethylbutyl N-{(S)-[2-C-(4-aminopyrrolo[2,1-f][1,2,4]triazin-7-yl)-2,5-anhydro-d-altrononitril-6-O-yl]phenoxyphosphoryl}-L-alaninate. It has a molecular formula of C27H35N6O8P and a molecular weight of 602.6 g/mol. Remdesivir has the following structural formula. VEKLURY for injection contains 100 mg of remdesivir as a sterile, preservative-free lyophilized white to off-white to yellow powder in a single-dose clear glass vial. It requires reconstitution and then further dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5, 2.6)]. The inactive ingredients are 3 g betadex sulfobutyl ether sodium and may include hydrochloric acid and/or sodium hydroxide for pH adjustment. VEKLURY injection contains 100 mg/20 mL (5 mg/mL) of remdesivir as a sterile, preservative-free, clear, colorless to yellow solution in a single-dose clear glass vial. It requires dilution prior to administration by intravenous infusion [see Dosage and Administration (2.5, 2.6)]. The inactive ingredients are 6 g betadex sulfobutyl ether sodium, Water for Injection, USP, and may include hydrochloric acid and/or sodium hydroxide for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>61958-3001-2</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (61958-3001-2) / 1 BLISTER PACK in 1 POUCH / 5 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>61958-3001-02</NDC11Code>
<ProductNDC>61958-3001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sunlenca</ProprietaryName>
<NonProprietaryName>Lenacapavir Sodium</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215974</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>LENACAPAVIR SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], HIV Capsid Inhibitors [MoA], Human Immunodeficiency Virus 1 Capsid Inhibitor [EPC], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SUNLENCA, a human immunodeficiency virus type 1 (HIV-1) capsid inhibitor, is indicated: 1 in combination with other antiretroviral(s), for the treatment of HIV-1 infection in heavily treatment-experienced adults with multidrug resistant HIV-1 whose current antiretroviral regimen is failing due to resistance, intolerance, or safety considerations. (1.1), 2 for oral loading as a component of the initiation regimen for BIXLENVO (bictegravir [BIC]/lenacapavir [LEN]), a complete regimen for the treatment of HIV-1 infection, in adults to replace the current antiretroviral regimen in those who are virologically suppressed (HIV-1 RNA less than 50 copies per mL) on a stable antiretroviral regimen with no known or suspected resistance to the individual components of BIXLENVO. (1.2).</IndicationAndUsage>
<Description>SUNLENCA tablets and SUNLENCA injection contain lenacapavir sodium, a capsid inhibitor. The chemical name of lenacapavir sodium is: Sodium (4-chloro-7-(2-((S)-1-(2-((3bS,4aR)-5,5-difluoro-3-(trifluoromethyl)-3b,4,4a,5-tetrahydro-1H-cyclopropa[3,4]cyclopenta[1,2-c]pyrazol-1-yl)acetamido)-2-(3,5-difluorophenyl)ethyl)-6-(3-methyl-3-(methylsulfonyl)but-1-yn-1-yl)pyridin-3-yl)-1-(2,2,2-trifluoroethyl)-1H-indazol-3-yl)(methylsulfonyl)amide. Lenacapavir sodium has a molecular formula of C39H31ClF10N7NaO5S2, a molecular weight of 990.3, and the following structural formula. Lenacapavir sodium is a light yellow to yellow solid and is practically insoluble in water.</Description>
</NDC>
<NDC>
<NDCCode>61958-3104-1</NDCCode>
<PackageDescription>30 VIAL, SINGLE-DOSE in 1 CARTON (61958-3104-1) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE (61958-3104-2) </PackageDescription>
<NDC11Code>61958-3104-01</NDC11Code>
<ProductNDC>61958-3104</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hepcludex</ProprietaryName>
<NonProprietaryName>Bulevirtide</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20260522</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761468</ApplicationNumber>
<LabelerName>Gilead Sciences, Inc.</LabelerName>
<SubstanceName>BULEVIRTIDE ACETATE</SubstanceName>
<StrengthNumber>8.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260522</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HEPCLUDEX is indicated for the treatment of chronic hepatitis delta virus (HDV) infection in adults without cirrhosis or with compensated cirrhosis. This indication is approved under accelerated approval based on a decrease in HDV RNA and alanine aminotransferase (ALT) normalization [see Clinical Studies (14)]. An improvement in disease-related clinical outcomes has not been established. Continued approval for this indication may be contingent upon verification and description of clinical benefit in a confirmatory trial(s).</IndicationAndUsage>
<Description>Bulevirtide-gmod is an NTCP-directed HDV attachment inhibitor. Bulevirtide as an acetate salt, is a 47-amino acid protein with a fatty acid myristoyl residue at the N-terminus and an amidated C-terminus. All chiral amino acids are in the L-configuration. The counter ion acetate is bound in ionic form to basic groups of the peptide molecule in a nonstoichiometric ratio. Bulevirtide acetate has a molecular formula of C248H355N65O72 (net) and a molecular weight of 5398.9 Da (average mass, net), and has the following structural formula. HEPCLUDEX (bulevirtide-gmod) for injection is a sterile, preservative-free, white to off-white lyophilized powder or cake for subcutaneous injection after reconstitution. Each single-dose vial delivers 8.5 mg of bulevirtide-gmod (equivalent to approximately 8.6 mg of bulevirtide acetate). The inactive ingredients are histidine (3.3 mg), mannitol (51 mg), and sucrose (8.5 mg), and may include hydrochloric acid and/or sodium hydroxide to adjust the pH to 8.5. HEPCLUDEX requires reconstitution prior to administration by subcutaneous injection [see Dosage and Administration (2.2)].</Description>
</NDC>
<NDC>
<NDCCode>0093-3301-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (0093-3301-01) </PackageDescription>
<NDC11Code>00093-3301-01</NDC11Code>
<ProductNDC>0093-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075977</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240917</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including tramadol hydrochloride tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol hydrochloride. Its structural formula is. C16H25NO2HCl M.W. 299.84. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP (equivalent to 43.9 mg of tramadol) and are white in color. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 4000, pregelatinized corn starch, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0093-3301-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (0093-3301-05) </PackageDescription>
<NDC11Code>00093-3301-05</NDC11Code>
<ProductNDC>0093-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
<NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240912</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075977</ApplicationNumber>
<LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
<SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240912</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tramadol hydrochloride tablets are indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including tramadol hydrochloride tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Tramadol hydrochloride tablets, USP, for oral use, are an opioid agonist. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino)methyl]-1-(3-methoxyphenyl)cyclohexanol hydrochloride. Its structural formula is. C16H25NO2HCl M.W. 299.84. Tramadol hydrochloride, USP is a white, bitter, crystalline and odorless powder. It is readily soluble in water and ethanol and has a pKa of 9.41. The n-octanol/water log partition coefficient (logP) is 1.35 at pH 7. Tramadol hydrochloride tablets, USP contain 50 mg of tramadol hydrochloride, USP (equivalent to 43.9 mg of tramadol) and are white in color. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol 4000, pregelatinized corn starch, sodium starch glycolate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0264-3301-10</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3301-10) / 500 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3301-10</NDC11Code>
<ProductNDC>0264-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium In Sodium Chloride</ProprietaryName>
<NonProprietaryName>Heparin Sodium In Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250718</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019953</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250718</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium in 0.45% Sodium Chloride Injection is indicated for: 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism;, 2 Prophylaxis and treatment of thromboembolic complications associated with atrial fibrillation;, 3 Treatment of acute and chronic consumption coagulopathies (disseminated intravascular coagulation);, 4 Prevention of clotting in arterial and cardiac surgery;, 5 Prophylaxis and treatment of peripheral arterial embolism;, 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogenous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans having anticoagulant properties. It is composed of polymers of alternating derivations of alpha-L-iduronic acid 2-sulfate (1), 2-deoxy-2-sulfamino- alpha-D-glucose 6-sulfate (2), beta-D-glucuronic acid (3), 2-acetamido-2- deoxy-alpha-D-glucose (4), and alpha-L-iduronic acid (5). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection is a sterile, single-dose, clear, nonpyrogenic solution prepared from Heparin Sodium USP (derived from porcine intestinal mucosa and standardized for use as an anticoagulant) in 0.45% Sodium Chloride Injection. It is to be administered by intravenous injection. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. The pH range is 7.0 (6.8-7.2) and the osmolarity mOsmol/L (calc.) is 206. The concentration of electrolytes is 109 mEq/L Sodium, 77 mEq/L Chloride, 32 mEq/L Phosphate, and 6 mEq/L Citrate. 50 USP units/mL: Each 100 mL of the 25,000 USP units per 500 mL preparation contains: 5,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. 100 USP units/mL: Each 100 mL of the 25,000 USP units per 250 mL preparation contains: 10,000 USP units of heparin sodium, 0.45 g Sodium Chloride USP, 0.43 g Dibasic Sodium Phosphate USP, 0.037 g Citric Acid Anhydrous USP, and Water for Injection USP until quantity sufficient. The plastic container is made from a multilayered film specifically developed for parenteral drugs. The solution contact layer is a rubberized copolymer of ethylene and propylene. The container is nontoxic and biologically inert. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional moisture barrier when necessary. The plastic container is not made with natural rubber latex, PVC or DEHP. The closure system has two ports; the one for the administration set has a tamper evident plastic protector.</Description>
</NDC>
<NDC>
<NDCCode>0409-3301-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0409-3301-10) / 20 mL in 1 VIAL (0409-3301-01) </PackageDescription>
<NDC11Code>00409-3301-10</NDC11Code>
<ProductNDC>0409-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Precedex</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220307</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021038</ApplicationNumber>
<LabelerName>Hospira, Inc.</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>PRECEDEX (dexmedetomidine hydrochloride) in 0.9% Sodium Chloride Injection (4 mcg/mL) is a sterile, nonpyrogenic ready to use solution suitable for intravenous infusion. PRECEDEX contains dexmedetomidine hydrochloride as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride is the S-enantiomer of medetomidine Dexmedetomidine hydrochloride chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride has a molecular weight of 236.7 and the empirical formula is C13H16N2 ∙ HCl and the structural formula is. PRECEDEX in 0.9% Sodium Chloride Injection is ready to be used. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 8.0. Each mL contains 4.72 mcg of dexmedetomidine hydrochloride (equivalent to 4 mcg or 0.004 mg of dexmedetomidine) and 9 mg sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>15054-3301-1</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (15054-3301-1) / 30 CAPSULE, COATED PELLETS in 1 BOTTLE</PackageDescription>
<NDC11Code>15054-3301-01</NDC11Code>
<ProductNDC>15054-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bylvay</ProprietaryName>
<NonProprietaryName>Odevixibat</NonProprietaryName>
<DosageFormName>CAPSULE, COATED PELLETS</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240110</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215498</ApplicationNumber>
<LabelerName>Ipsen Biopharmaceuticals, Inc.</LabelerName>
<SubstanceName>ODEVIXIBAT</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/1</StrengthUnit>
<Pharm_Classes>Ileal Bile Acid Transporter Inhibitor [EPC], Ileal Bile Acid Transporter Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BYLVAY is an ileal bile acid transporter (IBAT) inhibitor indicated for:. Progressive Familial Intrahepatic Cholestasis (PFIC): 1 the treatment of pruritus in patients 3 months of age and older with progressive familial intrahepatic cholestasis (PFIC). (1.1).</IndicationAndUsage>
<Description>The active ingredient in BYLVAY (odevixibat) capsules and BYLVAY (odevixibat) oral pellets, an ileal bile acid transporter (IBAT) inhibitor, is (2S)-2-{[(2R)-2-(2-{[3,3-dibutyl-7-(methylsulfanyl)-1,1-dioxo-5-phenyl-2,3,4,5-tetrahydro-1H-1λ6,2,5-benzothiadiazepin-8yl]oxy}acetamido)-2-(4-hydroxyphenyl)acetly]amino}butanoic acid, which is formulated as the sesquihydrate having the following chemical structure:. The molecular formula is C37H48N4O8S2 × 1.5 H2O, with a molecular weight of 768.0 g/mol (anhydrous 740.9 g/mol). Odevixibat sesquihydrate is a white to off-white solid. Its solubility in aqueous solutions is pH-dependent and increases with increased pH. BYLVAY is available for oral administration as oral pellets containing odevixibat sesquihydrate equivalent to 200 mcg or 600 mcg of odevixibat, and as capsules containing odevixibat sesquihydrate equivalent to 400 mcg or 1200 mcg of odevixibat, and the following excipients: hypromellose and microcrystalline cellulose. The capsule shells for the oral pellets contain hypromellose, titanium dioxide and yellow iron oxide. The capsule shells for the capsules contain hypromellose, red iron oxide, titanium dioxide and yellow iron oxide. The imprinting ink contains ferrosoferric oxide/black iron oxide and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>0363-3301-52</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (0363-3301-52) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00363-3301-52</NDC11Code>
<ProductNDC>0363-3301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nasal Decongestant D</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075153</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0363-3301-60</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 CARTON (0363-3301-60) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>00363-3301-60</NDC11Code>
<ProductNDC>0363-3301</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nasal Decongestant D</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220406</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075153</ApplicationNumber>
<LabelerName>Walgreen Company</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220406</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves nasal congestion due to the common cold, hay fever or other upper respiratory allergies. temporarily relieves sinus congestion and pressure.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>0548-3301-00</NDCCode>
<PackageDescription>10 SYRINGE in 1 PACKAGE (0548-3301-00) > 50 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>00548-3301-00</NDC11Code>
<ProductNDC>0548-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose Monohydrate</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>PARENTERAL</RouteName>
<StartMarketingDate>20000601</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Amphastar Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-12-06</LastUpdate>
</NDC>
<NDC>
<NDCCode>0703-3301-04</NDCCode>
<PackageDescription>25 VIAL, SINGLE-USE in 1 TRAY (0703-3301-04) / 1 mL in 1 VIAL, SINGLE-USE (0703-3301-01) </PackageDescription>
<NDC11Code>00703-3301-04</NDC11Code>
<ProductNDC>0703-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Octreotide Acetate</ProprietaryName>
<NonProprietaryName>Octreotide Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20051114</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075957</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>OCTREOTIDE ACETATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Somatostatin Analog [EPC], Somatostatin Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0781-3301-95</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (0781-3301-95) > 1 INJECTION in 1 VIAL, SINGLE-DOSE (0781-3301-85)</PackageDescription>
<NDC11Code>00781-3301-95</NDC11Code>
<ProductNDC>0781-3301</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20101221</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090291</ApplicationNumber>
<LabelerName>Sandoz Inc</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-08-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>10106-3301-1</NDCCode>
<PackageDescription>49.9 kg in 1 DRUM (10106-3301-1) </PackageDescription>
<NDC11Code>10106-3301-01</NDC11Code>
<ProductNDC>10106-3301</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<StartMarketingDate>20180626</StartMarketingDate>
<EndMarketingDate>20250124</EndMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Avantor Performance Materials International, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<StartMarketingDatePackage>26-JUN-18</StartMarketingDatePackage>
<EndMarketingDatePackage>24-JAN-25</EndMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>11054-005-31</NDCCode>
<PackageDescription>3301 L in 1 CYLINDER (11054-005-31) </PackageDescription>
<NDC11Code>11054-0005-31</NDC11Code>
<ProductNDC>11054-005</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrogen</ProprietaryName>
<ProprietaryNameSuffix>Compressed, Nf</ProprietaryNameSuffix>
<NonProprietaryName>Nitrogen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19971106</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205839</ApplicationNumber>
<LabelerName>AIRGAS USA, LLC</LabelerName>
<SubstanceName>NITROGEN</SubstanceName>
<StrengthNumber>992</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-06-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19971106</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>