{
"NDC": [
{
"NDCCode": "62135-262-25",
"PackageDescription": "250 CAPSULE in 1 BOTTLE (62135-262-25) ",
"NDC11Code": "62135-0262-25",
"ProductNDC": "62135-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Monohydrate",
"NonProprietaryName": "Doxycycline Monohydrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19891229",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050641",
"LabelerName": "Chartwell RX, LLC.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210611",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10."
},
{
"NDCCode": "62135-262-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (62135-262-20) ",
"NDC11Code": "62135-0262-20",
"ProductNDC": "62135-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Monohydrate",
"NonProprietaryName": "Doxycycline Monohydrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19891229",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050641",
"LabelerName": "Chartwell RX, LLC.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210611",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10."
},
{
"NDCCode": "62135-262-50",
"PackageDescription": "50 CAPSULE in 1 BOTTLE (62135-262-50) ",
"NDC11Code": "62135-0262-50",
"ProductNDC": "62135-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Monohydrate",
"NonProprietaryName": "Doxycycline Monohydrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19891229",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050641",
"LabelerName": "Chartwell RX, LLC.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210611",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10."
},
{
"NDCCode": "62135-262-60",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (62135-262-60) ",
"NDC11Code": "62135-0262-60",
"ProductNDC": "62135-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Monohydrate",
"NonProprietaryName": "Doxycycline Monohydrate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19891229",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA050641",
"LabelerName": "Chartwell RX, LLC.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210611",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10."
},
{
"NDCCode": "62135-050-24",
"PackageDescription": "2 TRAY in 1 BOX (62135-050-24) / 10 CUP in 1 TRAY / 25 mL in 1 CUP (62135-050-52) ",
"NDC11Code": "62135-0050-24",
"ProductNDC": "62135-050",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "19820412",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA087294",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "HYDROXYZINE DIHYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/25mL",
"Pharm_Classes": "Antihistamine [EPC], Histamine Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240923",
"SamplePackage": "N",
"IndicationAndUsage": "For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.",
"Description": "Hydroxyzine hydrochloride is designated chemically as (±)-2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. Its structural formula is as follows:. Inactive Ingredientsfor Hydroxyzine Hydrochloride Oral Solution, USP (Syrup) are: alcohol 0.5% (v/v); sucrose; methylparaben; peppermint flavor; propylene glycol; propylparaben; and purified water. It may also containcitric acid anhydrous or sodium citrate dihydrate for pH adjustment. The pH range is between 2.0 and 4.3."
},
{
"NDCCode": "62135-717-26",
"PackageDescription": "25 TABLET, COATED in 1 BOTTLE (62135-717-26) ",
"NDC11Code": "62135-0717-26",
"ProductNDC": "62135-717",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chloroquine Phosphate",
"NonProprietaryName": "Chloroquine Phosphate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214756",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "CHLOROQUINE PHOSPHATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230711",
"SamplePackage": "N",
"IndicationAndUsage": "Chloroquine phosphate tablets are indicated for the: 1 Treatment of uncomplicated malaria due to susceptible strains of P. falciparum, P. malariae, P. ovale,and P. vivax. , 2 Prophylaxis of malaria in geographic areas where resistance to chloroquine is not present., 3 Treatment of extraintestinal amebiasis.",
"Description": "Chloroquine Phosphate Tablet, USP, is a 4-aminoquinoline compound for oral administration. It is a white, odorless, bitter tasting, crystalline substance, freely soluble in water. Chloroquine phosphate tablet is an antimalarial and amebicidal drug. Chemically, it is 7-chloro-4-[[4-(diethylamino)-1-methylbutyl]amino]quinoline phosphate (1:2) and has the following structural formula. Each tablet contains 500 mg of chloroquine phosphate USP, equivalent to 300 mg chloroquine base. Inactive Ingredients. microcrystalline cellulose, dibasic calcium phosphate, pregelatinzed starch, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, polyethylene glycol, titanium dioxide, hydroxy propyl methyl cellulose and polysorbate 80."
},
{
"NDCCode": "62135-761-26",
"PackageDescription": "25 TABLET in 1 BOTTLE (62135-761-26) ",
"NDC11Code": "62135-0761-26",
"ProductNDC": "62135-761",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209097",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "METHYLPREDNISOLONE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240514",
"SamplePackage": "N",
"IndicationAndUsage": "Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Synovitis of osteoarthritis Acute nonspecific tenosynovitis Post-traumatic osteoarthritis Psoriatic arthritis Epicondylitis Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Severe seborrheic dermatitis Exfoliative dermatitis Mycosis fungoides Pemphigus Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Drug hypersensitivity reactions Serum sickness Contact dermatitis Bronchial asthma Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Keratitis Optic neuritis Allergic conjunctivitis Chorioretinitis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Berylliosis Loeffler’s syndrome not manageable by other means Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.",
"Description": "Methylprednisolone Tablets, USP contain Methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, odorless, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for Methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)-and the molecular weight is 374.48. The structural formula is represented below. Each Methylprednisolone Tablets, USP for oral administration contains 2 mg, 4 mg, 8 mg, 16 mg or 32 mg of Methylprednisolone, USP. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body’s immune responses to diverse stimuli."
},
{
"NDCCode": "62135-763-26",
"PackageDescription": "25 TABLET in 1 BOTTLE (62135-763-26) ",
"NDC11Code": "62135-0763-26",
"ProductNDC": "62135-763",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone",
"NonProprietaryName": "Methylprednisolone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209097",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "METHYLPREDNISOLONE",
"StrengthNumber": "32",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240514",
"SamplePackage": "N",
"IndicationAndUsage": "Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Synovitis of osteoarthritis Acute nonspecific tenosynovitis Post-traumatic osteoarthritis Psoriatic arthritis Epicondylitis Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Severe seborrheic dermatitis Exfoliative dermatitis Mycosis fungoides Pemphigus Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Drug hypersensitivity reactions Serum sickness Contact dermatitis Bronchial asthma Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Keratitis Optic neuritis Allergic conjunctivitis Chorioretinitis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Berylliosis Loeffler’s syndrome not manageable by other means Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.",
"Description": "Methylprednisolone Tablets, USP contain Methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, odorless, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for Methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)-and the molecular weight is 374.48. The structural formula is represented below. Each Methylprednisolone Tablets, USP for oral administration contains 2 mg, 4 mg, 8 mg, 16 mg or 32 mg of Methylprednisolone, USP. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body’s immune responses to diverse stimuli."
},
{
"NDCCode": "62135-973-25",
"PackageDescription": "25 TABLET in 1 BOTTLE (62135-973-25) ",
"NDC11Code": "62135-0973-25",
"ProductNDC": "62135-973",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mefloquine Hydrochloride",
"NonProprietaryName": "Mefloquine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076175",
"LabelerName": "Chartwell RX, LLC",
"SubstanceName": "MEFLOQUINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimalarial [EPC]",
"Status": "Active",
"LastUpdate": "2024-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241115",
"SamplePackage": "N",
"Description": "Mefloquine hydrochloride is an antimalarial agent available as 250 mg tablets of mefloquine hydrochloride (equivalent to 228.0 mg of the free base) for oral administration. Mefloquine hydrochloride is a 4-quinolinemethanol derivative with the specific chemical name of (R*, S*)-(±)-α-2-piperidinyl-2,8-bis (trifluoromethyl)-4-quinolinemethanol hydrochloride. It is a 2-aryl substituted chemical structural analog of quinine. The drug is a white to almost white crystalline compound, slightly soluble in water. Mefloquine hydrochloride has a calculated molecular weight of 414.78 and the following structural formula. Mefloquine Hydrochloride Tablets USP, 250 mg meets USP Dissolution Test 2. The inactive ingredients are crospovidone, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc."
},
{
"NDCCode": "36000-262-25",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (36000-262-25) / 2 mL in 1 VIAL, SINGLE-DOSE (36000-262-01) ",
"NDC11Code": "36000-0262-25",
"ProductNDC": "36000-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexmedetomidine Hydrochloride",
"NonProprietaryName": "Dexmedetomidine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20260416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208103",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "DEXMEDETOMIDINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260416",
"SamplePackage": "N",
"Description": "Dexmedetomidine Injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection, USP contains dexmedetomidine hydrochloride, USP as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride, USP is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride, USP chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 g/mol and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is solid, white, or almost white powder that is freely soluble in water and alcohol, slightly soluble in methylene chloride and acetone and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride, USP (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers."
},
{
"NDCCode": "55150-262-03",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (55150-262-03) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55150-0262-03",
"ProductNDC": "55150-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Methylprednisolone Sodium Succinate",
"NonProprietaryName": "Methylprednisolone Sodium Succinate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20151215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207667",
"LabelerName": "Eugia US LLC",
"SubstanceName": "METHYLPREDNISOLONE SODIUM SUCCINATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151215",
"SamplePackage": "N",
"IndicationAndUsage": "When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection is indicated as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.",
"Description": "Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. Methylprednisolone sodium succinate USP is the sodium salt of methylprednisolone hemisuccinate USP, which is formed in situ, with the aid of sodium hydroxide. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below: Methylprednisolone sodium succinate USP is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly.Methylprednisolone sodium succinate for injection, USP is a sterile, white color lyophilized cake, available in preservative and preservative-free formulations: 40 mg (Single-Dose Vial): Each mL (when mixed with 1 mL of Water for Injection USP) contains 53 mg of methylprednisolone sodium succinate USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; 25 mg lactose hydrous. This package does not contain diluent. Each mL (when mixed with 1 mL of Bacteriostatic Water for Injection USP) contains 53 mg of methylprednisolone sodium succinate USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; 25 mg lactose hydrous. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 125 mg (Single-Dose Vial): Each 2 mL (when mixed with 2 mL of Water for Injection USP) contains 165.74 mg of methylprednisolone sodium succinate USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. Each 2 mL (when mixed with 2 mL of Bacteriostatic Water for Injection USP) contains 165.74 mg of methylprednisolone sodium succinate USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 500 mg (Multiple-Dose Vial): Each 8 mL (when mixed with 8 mL of Bacteriostatic Water for Injection USP) contains 663 mg of methylprednisolone sodium succinate USP equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 2 grams (Single-Dose Vial): Each 30.6 mL (when mixed with 30 mL of Bacteriostatic Water for Injection USP) contains 2.65 grams of methylprednisolone sodium succinate USP equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. IMPORTANT — Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol as described above when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8."
},
{
"NDCCode": "63323-262-01",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-01) / 1 mL in 1 VIAL",
"NDC11Code": "63323-0262-01",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000319",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preservative free, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each 0.5 mL of the 5,000 units per 0.5 mL preparation contains: 5,000 USP Heparin units (porcine); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with benzyl alcohol, is available as follows:. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 6 mg sodium chloride; 15 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 5 mg sodium chloride; 10.42 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 20,000 units per mL preparation contains: 20,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-262-06",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-06) / 1 mL in 1 VIAL (63323-262-03) ",
"NDC11Code": "63323-0262-06",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200325",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200325",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits):."
},
{
"NDCCode": "63323-262-26",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-26) / 1 mL in 1 VIAL (63323-262-09) ",
"NDC11Code": "63323-0262-26",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200325",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-262-36",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-36) > 1 mL in 1 VIAL (63323-262-11) ",
"NDC11Code": "63323-0262-36",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200302",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2021-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200302",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-262-55",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-55) > 1 mL in 1 VIAL",
"NDC11Code": "63323-0262-55",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000319",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "67877-262-25",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (67877-262-25) > 6 TABLET in 1 BLISTER PACK",
"NDC11Code": "67877-0262-25",
"ProductNDC": "67877-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rizatriptan Benzoate",
"NonProprietaryName": "Rizatriptan Benzoate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120625",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203269",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "RIZATRIPTAN BENZOATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-10-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120625",
"SamplePackage": "N",
"IndicationAndUsage": "Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old.Limitations of Use: 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks., 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache. .",
"Description": "Rizatriptan benzoate tablet, USP contains rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist.Rizatriptan benzoate is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.4. Rizatriptan benzoate is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C.Rizatriptan benzoate Tablets, USP are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), and magnesium stearate."
},
{
"NDCCode": "69039-262-00",
"PackageDescription": "4.25 g in 1 CARTRIDGE (69039-262-00) ",
"NDC11Code": "69039-0262-00",
"ProductNDC": "69039-262",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sun Bum Tinted Spf15 Sunscreen Pinkini",
"NonProprietaryName": "Avobenzone, Octinoxate, Octisalate",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180415",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Sun Bum LLC",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OCTISALATE",
"StrengthNumber": "19; 71; 49",
"StrengthUnit": "mg/g; mg/g; mg/g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180415",
"SamplePackage": "N"
},
{
"NDCCode": "0603-0235-16",
"PackageDescription": "30 TABLET, CHEWABLE in 1 CARTON (0603-0235-16)",
"NDC11Code": "00603-0235-16",
"ProductNDC": "0603-0235",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Pink Bismuth",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20030428",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "Qualitest Pharmaceuticals",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-10-25",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "0703-5656-01",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (0703-5656-01) / 25 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "00703-5656-01",
"ProductNDC": "0703-5656",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Toposar",
"NonProprietaryName": "Etoposide",
"DosageFormName": "INJECTION, SOLUTION, CONCENTRATE",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19960801",
"EndMarketingDate": "20240131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074529",
"LabelerName": "Teva Parenteral Medicines, Inc.",
"SubstanceName": "ETOPOSIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-02-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19960801",
"EndMarketingDatePackage": "20240131",
"SamplePackage": "N",
"IndicationAndUsage": "Toposar (etoposide injection) is indicated in the management of the following neoplasms.",
"Description": "Toposar® (etoposide injection USP) (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Toposar (etoposide injection USP) is available for intravenous use as a sterile 20 mg/mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, yellow liquid is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is. C29H32O13 M.W. 588.56."
},
{
"NDCCode": "11822-0319-0",
"PackageDescription": "5 POUCH in 1 CARTON (11822-0319-0) > 6 TABLET, CHEWABLE in 1 POUCH",
"NDC11Code": "11822-0319-00",
"ProductNDC": "11822-0319",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stomach Relief",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "19980716",
"EndMarketingDate": "20220812",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "Rite Aid Corporation",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2021-05-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19980716",
"EndMarketingDatePackage": "20220812",
"SamplePackage": "N"
},
{
"NDCCode": "16714-262-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (16714-262-01) ",
"NDC11Code": "16714-0262-01",
"ProductNDC": "16714-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amitriptyline Hydrochloride",
"NonProprietaryName": "Amitriptyline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20210825",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210086",
"LabelerName": "Northstar Rx LLC.",
"SubstanceName": "AMITRIPTYLINE HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Active",
"LastUpdate": "2025-06-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20210825",
"SamplePackage": "N",
"IndicationAndUsage": "For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.",
"Description": "Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow."
},
{
"NDCCode": "31722-262-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (31722-262-01) ",
"NDC11Code": "31722-0262-01",
"ProductNDC": "31722-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212414",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230511",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: Multiple myeloma (MM), in combination with dexamethasone ( 1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) ( 1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities ( 1.2). Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib ( 1.3). Previously treated follicular lymphoma (FL), in combination with a rituximab product ( 1.4). Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product ( 1.5). Limitations of Use: Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials ( 1.4).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C 13H 13N 3O 3, and the gram molecular weight is 259.27. Lenalidomide is an off-white to pale-yellow powder. It is slightly soluble in dimethyl formamide. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The capsule shell contains gelatin, titanium dioxide, in addition 2.5 mg, 15 mg, and 20 mg contains iron oxide red, 10 mg contains FD&C Yellow 6, 20 mg contains iron oxide yellow and iron oxide black. The capsules are imprinted with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "31722-262-21",
"PackageDescription": "21 CAPSULE in 1 BOTTLE (31722-262-21) ",
"NDC11Code": "31722-0262-21",
"ProductNDC": "31722-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lenalidomide",
"NonProprietaryName": "Lenalidomide",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230511",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212414",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LENALIDOMIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Thalidomide Analog [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230511",
"SamplePackage": "N",
"IndicationAndUsage": "Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: Multiple myeloma (MM), in combination with dexamethasone ( 1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) ( 1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities ( 1.2). Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib ( 1.3). Previously treated follicular lymphoma (FL), in combination with a rituximab product ( 1.4). Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product ( 1.5). Limitations of Use: Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials ( 1.4).",
"Description": "Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C 13H 13N 3O 3, and the gram molecular weight is 259.27. Lenalidomide is an off-white to pale-yellow powder. It is slightly soluble in dimethyl formamide. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The capsule shell contains gelatin, titanium dioxide, in addition 2.5 mg, 15 mg, and 20 mg contains iron oxide red, 10 mg contains FD&C Yellow 6, 20 mg contains iron oxide yellow and iron oxide black. The capsules are imprinted with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution."
},
{
"NDCCode": "37000-262-50",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (37000-262-50) > 50 mL in 1 BOTTLE, PUMP",
"NDC11Code": "37000-0262-50",
"ProductNDC": "37000-262",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Olay Regenerist Dna Superstructure Uv",
"ProprietaryNameSuffix": "Spf 30",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene, And Oxybenzone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110601",
"EndMarketingDate": "20140601",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Procter & Gamble Manufacturing Company",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE",
"StrengthNumber": "29.4; 147; 49; 25.4; 58.8",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-06-03"
},
{
"NDCCode": "37808-346-08",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (37808-346-08) / 24 TABLET in 1 BOTTLE, PLASTIC",
"NDC11Code": "37808-0346-08",
"ProductNDC": "37808-346",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stomach Relief",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110506",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M008",
"LabelerName": "H E B",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110506",
"SamplePackage": "N",
"IndicationAndUsage": "relieves: 1 travelers' diarrhea, 2 diarrhea, 3 upset stomach due to overindulgence in food and drink, including:heartburnindigestionnauseagasbelchingfullness."
},
{
"NDCCode": "42546-185-30",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (42546-185-30) > 1 KIT in 1 BLISTER PACK",
"NDC11Code": "42546-0185-30",
"ProductNDC": "42546-185",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bal-care Dha Essential",
"NonProprietaryName": "Beta Carotene, Ascorbic Acid, Cholecalciferol, .alpha.-tocopherol Acetate, Dl-, Thiamine Mononitrate, Riboflavin, Niacinamide, Pyridoxine Hydrochloride, Folic Acid, Cyanocobalamin, Calcium Carbonate, Sodium Feredetate, Magnesium Oxide, Zinc Oxide, Cupric Oxide, Iron Sucrose, Iodine, Omega 3 Fatty Acids",
"DosageFormName": "KIT",
"StartMarketingDate": "20120501",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "PruGen, Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"Description": "SUPPLEMENT FACTSServing Size 1 Tablet:VITAMINSA (beta carotene) . . . . . . . . . . . . . . . . . . . . . . . . . . 2,850 IU 36% Daily ValueC (ascorbic acid) . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mg 200% Daily ValueD (cholecalciferol) . . . . . . . . . . . . . . . . . . . . . . . . .840 IU 210% Daily ValueE (dl-alpha tocopheryl acetate) . . . . . . . . . . . . . .3 mg 10% Daily ValueB1 (thiamine mononitrate) . . . . . . . . . . . . . . . . . . .1.8 mg 106% Daily ValueB2 (riboflavin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 mg 200% Daily ValueNiacinamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mg 100% Daily ValueB6 (pyridoxine hydrochloride) . . . . . . . . . . . . . . .50 mg 2000% Daily ValueFolic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 mg 125% Daily ValueB12 (cyanocobalamin) . . . . . . . . . . . . . . . . . . . . . . 12 mcg 150% Daily Value MINERALSCalcium (calcium carbonate) . . . . . . . . . . . . . . . . 219 mg 17% Daily ValueIron (as sodium iron EDTA and polysaccharide iron complex) . . .27 mg 150% Daily ValueMagnesium (magnesium oxide) . . . . . . . . . . . . . 25 mg 6% Daily ValueZinc (zinc oxide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mg 167% Daily ValueCopper (cupric oxide) . . . . . . . . . . . . . . . . . . . . . . . .2 mg 100% Daily ValueService Size 1 Softgel:374 mg purified omega-3 fatty acids including:At least 262 mg DHA (docosahexaenoic acid); also contains at least 112 mg of other omega-3 fatty acids.OTHER TABLET INGREDIENTS:Microcrystalline Cellulose, Hydroxypropyl Methylcellulose, Crospovidone, Maltodextrin, Acacia Gum, Silicon Dioxide, Triacetin, Magnesium Stearate, Titanium Dioxide, Polydextrose, Yellow #6 Lake, Blue #2 Lake, Red #40 Lake.OTHER SOFTGEL INGREDIENTS: Ammonium Hydroxide, Ethylcellulose, Gelatin, Glycerin, Medium Chain Triglycerides, Oleic Acid, Sodium Alginate, Stearic Acid, Vanillin.Softgel contains fish and soybeans."
},
{
"NDCCode": "42961-021-02",
"PackageDescription": "42 g in 1 BOX (42961-021-02) ",
"NDC11Code": "42961-0021-02",
"ProductNDC": "42961-021",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zee Pept-eez",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20211025",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "Cintas Corp",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2022-03-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20211025",
"SamplePackage": "N"
},
{
"NDCCode": "47682-220-13",
"PackageDescription": "250 PACKET in 1 BOX, UNIT-DOSE (47682-220-13) > 2 TABLET, CHEWABLE in 1 PACKET (47682-220-99)",
"NDC11Code": "47682-0220-13",
"ProductNDC": "47682-220",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medique Diotame",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20081230",
"EndMarketingDate": "20170722",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "Unifirst First Aid Corporation",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-07-25"
},
{
"NDCCode": "47682-220-33",
"PackageDescription": "50 PACKET in 1 BOX, UNIT-DOSE (47682-220-33) > 2 TABLET, CHEWABLE in 1 PACKET (47682-220-99)",
"NDC11Code": "47682-0220-33",
"ProductNDC": "47682-220",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medique Diotame",
"NonProprietaryName": "Bismuth Subsalicylate",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20081230",
"EndMarketingDate": "20170722",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part335",
"LabelerName": "Unifirst First Aid Corporation",
"SubstanceName": "BISMUTH SUBSALICYLATE",
"StrengthNumber": "262",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2017-07-25"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62135-262-25</NDCCode>
<PackageDescription>250 CAPSULE in 1 BOTTLE (62135-262-25) </PackageDescription>
<NDC11Code>62135-0262-25</NDC11Code>
<ProductNDC>62135-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Monohydrate</ProprietaryName>
<NonProprietaryName>Doxycycline Monohydrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19891229</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>Chartwell RX, LLC.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10.</Description>
</NDC>
<NDC>
<NDCCode>62135-262-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (62135-262-20) </PackageDescription>
<NDC11Code>62135-0262-20</NDC11Code>
<ProductNDC>62135-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Monohydrate</ProprietaryName>
<NonProprietaryName>Doxycycline Monohydrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19891229</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>Chartwell RX, LLC.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10.</Description>
</NDC>
<NDC>
<NDCCode>62135-262-50</NDCCode>
<PackageDescription>50 CAPSULE in 1 BOTTLE (62135-262-50) </PackageDescription>
<NDC11Code>62135-0262-50</NDC11Code>
<ProductNDC>62135-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Monohydrate</ProprietaryName>
<NonProprietaryName>Doxycycline Monohydrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19891229</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>Chartwell RX, LLC.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10.</Description>
</NDC>
<NDC>
<NDCCode>62135-262-60</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (62135-262-60) </PackageDescription>
<NDC11Code>62135-0262-60</NDC11Code>
<ProductNDC>62135-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Monohydrate</ProprietaryName>
<NonProprietaryName>Doxycycline Monohydrate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19891229</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA050641</ApplicationNumber>
<LabelerName>Chartwell RX, LLC.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline capsules and other antibacterial drugs, doxycycline capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis,although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species(in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli Enterobacter aerogenes Shigella species Acinetobacter species Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis,including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidumsubspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridiumspecies. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline capsules 150 mg, 100 mg, 75 mg, and 50 mg contain doxycycline monohydrate equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8 H 2O M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inert ingredients: colloidal silicon dioxide; magnesium stearate; microcrystalline cellulose; sodium starch glycolate; and a hard gelatin capsule which contains black iron oxide, red iron oxide, titanium dioxide, and yellow iron oxide for the 150 mg, 100 mg and 75 mg strengths, titanium dioxide and yellow iron oxide for the 50 mg strength. The capsules are printed with edible ink containing black iron oxide, FD&C Blue No. 2, FD&C Red No. 40, FD&C Blue No. 1, and D&C Yellow No. 10.</Description>
</NDC>
<NDC>
<NDCCode>62135-050-24</NDCCode>
<PackageDescription>2 TRAY in 1 BOX (62135-050-24) / 10 CUP in 1 TRAY / 25 mL in 1 CUP (62135-050-52) </PackageDescription>
<NDC11Code>62135-0050-24</NDC11Code>
<ProductNDC>62135-050</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19820412</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA087294</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>HYDROXYZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/25mL</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC], Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240923</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For symptomatic relief of anxiety and tension associated with psychoneurosis and as an adjunct in organic disease states in which anxiety is manifested. Useful in the management of pruritus due to allergic conditions such as chronic urticaria and atopic and contact dermatoses, and in histamine-mediated pruritus. As a sedative when used as premedication and following general anesthesia, hydroxyzine may potentiate meperidine and barbiturates, so their use in pre-anesthetic adjunctive therapy should be modified on an individual basis. Atropine and other belladonna alkaloids are not affected by the drug. Hydroxyzine is not known to interfere with the action of digitalis in any way and it may be used concurrently with this agent. The effectiveness of hydroxyzine as an antianxiety agent for long term use, that is more than 4 months, has not been assessed by systematic clinical studies. The physician should reassess periodically the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Hydroxyzine hydrochloride is designated chemically as (±)-2-[2-[4-( p-Chloro-α-phenylbenzyl)-1-piperazinyl]ethoxy]ethanol dihydrochloride. Its structural formula is as follows:. Inactive Ingredientsfor Hydroxyzine Hydrochloride Oral Solution, USP (Syrup) are: alcohol 0.5% (v/v); sucrose; methylparaben; peppermint flavor; propylene glycol; propylparaben; and purified water. It may also containcitric acid anhydrous or sodium citrate dihydrate for pH adjustment. The pH range is between 2.0 and 4.3.</Description>
</NDC>
<NDC>
<NDCCode>62135-717-26</NDCCode>
<PackageDescription>25 TABLET, COATED in 1 BOTTLE (62135-717-26) </PackageDescription>
<NDC11Code>62135-0717-26</NDC11Code>
<ProductNDC>62135-717</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chloroquine Phosphate</ProprietaryName>
<NonProprietaryName>Chloroquine Phosphate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214756</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>CHLOROQUINE PHOSPHATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230711</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chloroquine phosphate tablets are indicated for the: 1 Treatment of uncomplicated malaria due to susceptible strains of P. falciparum, P. malariae, P. ovale,and P. vivax. , 2 Prophylaxis of malaria in geographic areas where resistance to chloroquine is not present., 3 Treatment of extraintestinal amebiasis.</IndicationAndUsage>
<Description>Chloroquine Phosphate Tablet, USP, is a 4-aminoquinoline compound for oral administration. It is a white, odorless, bitter tasting, crystalline substance, freely soluble in water. Chloroquine phosphate tablet is an antimalarial and amebicidal drug. Chemically, it is 7-chloro-4-[[4-(diethylamino)-1-methylbutyl]amino]quinoline phosphate (1:2) and has the following structural formula. Each tablet contains 500 mg of chloroquine phosphate USP, equivalent to 300 mg chloroquine base. Inactive Ingredients. microcrystalline cellulose, dibasic calcium phosphate, pregelatinzed starch, sodium starch glycolate, colloidal silicon dioxide, magnesium stearate, polyethylene glycol, titanium dioxide, hydroxy propyl methyl cellulose and polysorbate 80.</Description>
</NDC>
<NDC>
<NDCCode>62135-761-26</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (62135-761-26) </PackageDescription>
<NDC11Code>62135-0761-26</NDC11Code>
<ProductNDC>62135-761</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209097</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Synovitis of osteoarthritis Acute nonspecific tenosynovitis Post-traumatic osteoarthritis Psoriatic arthritis Epicondylitis Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Severe seborrheic dermatitis Exfoliative dermatitis Mycosis fungoides Pemphigus Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Drug hypersensitivity reactions Serum sickness Contact dermatitis Bronchial asthma Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Keratitis Optic neuritis Allergic conjunctivitis Chorioretinitis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Berylliosis Loeffler’s syndrome not manageable by other means Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Methylprednisolone Tablets, USP contain Methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, odorless, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for Methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)-and the molecular weight is 374.48. The structural formula is represented below. Each Methylprednisolone Tablets, USP for oral administration contains 2 mg, 4 mg, 8 mg, 16 mg or 32 mg of Methylprednisolone, USP. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body’s immune responses to diverse stimuli.</Description>
</NDC>
<NDC>
<NDCCode>62135-763-26</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (62135-763-26) </PackageDescription>
<NDC11Code>62135-0763-26</NDC11Code>
<ProductNDC>62135-763</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone</ProprietaryName>
<NonProprietaryName>Methylprednisolone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209097</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE</SubstanceName>
<StrengthNumber>32</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240514</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Methylprednisolone tablets are indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance). Congenital adrenal hyperplasia Nonsuppurative thyroiditis Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in. Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy) Ankylosing spondylitis Acute and subacute bursitis Synovitis of osteoarthritis Acute nonspecific tenosynovitis Post-traumatic osteoarthritis Psoriatic arthritis Epicondylitis Acute gouty arthritis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of. Systemic lupus erythematosus Systemic dermatomyositis (polymyositis) Acute rheumatic carditis. 4. Dermatologic Diseases. Bullous dermatitis herpetiformis Severe erythema multiforme (Stevens-Johnson syndrome) Severe seborrheic dermatitis Exfoliative dermatitis Mycosis fungoides Pemphigus Severe psoriasis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment. Seasonal or perennial allergic rhinitis Drug hypersensitivity reactions Serum sickness Contact dermatitis Bronchial asthma Atopic dermatitis. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as. Allergic corneal marginal ulcers Herpes zoster ophthalmicus Anterior segment inflammation Diffuse posterior uveitis and choroiditis Sympathetic ophthalmia Keratitis Optic neuritis Allergic conjunctivitis Chorioretinitis Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Berylliosis Loeffler’s syndrome not manageable by other means Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy Aspiration pneumonitis. 8. Hematologic Disorders. Idiopathic thrombocytopenic purpura in adults Secondary thrombocytopenia in adults Acquired (autoimmune) hemolytic anemia Erythroblastopenia (RBC anemia) Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of. Leukemias and lymphomas in adults Acute leukemia of childhood. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in. Ulcerative colitis Regional enteritis. 12. Nervous System. Acute exacerbations of multiple sclerosis. 13. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement.</IndicationAndUsage>
<Description>Methylprednisolone Tablets, USP contain Methylprednisolone, USP which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Methylprednisolone, USP occurs as a white to practically white, odorless, crystalline powder. It is sparingly soluble in alcohol, in dioxane, and in methanol, slightly soluble in acetone, and in chloroform, and very slightly soluble in ether. It is practically insoluble in water. The chemical name for Methylprednisolone, USP is pregna-1,4-diene-3,20-dione, 11,17,21-trihydroxy-6-methyl-, (6α,11β)-and the molecular weight is 374.48. The structural formula is represented below. Each Methylprednisolone Tablets, USP for oral administration contains 2 mg, 4 mg, 8 mg, 16 mg or 32 mg of Methylprednisolone, USP. In addition, each tablet contains the inactive ingredients colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, sodium starch glycolate. ACTIONS. Naturally occurring glucocorticoids (hydrocortisone and cortisone), which also have salt-retaining properties, are used as replacement therapy in adrenocortical deficiency states. Their synthetic analogs are primarily used for their potent anti-inflammatory effects in disorders of many organ systems. Glucocorticoids cause profound and varied metabolic effects. In addition, they modify the body’s immune responses to diverse stimuli.</Description>
</NDC>
<NDC>
<NDCCode>62135-973-25</NDCCode>
<PackageDescription>25 TABLET in 1 BOTTLE (62135-973-25) </PackageDescription>
<NDC11Code>62135-0973-25</NDC11Code>
<ProductNDC>62135-973</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mefloquine Hydrochloride</ProprietaryName>
<NonProprietaryName>Mefloquine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076175</ApplicationNumber>
<LabelerName>Chartwell RX, LLC</LabelerName>
<SubstanceName>MEFLOQUINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimalarial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Mefloquine hydrochloride is an antimalarial agent available as 250 mg tablets of mefloquine hydrochloride (equivalent to 228.0 mg of the free base) for oral administration. Mefloquine hydrochloride is a 4-quinolinemethanol derivative with the specific chemical name of (R*, S*)-(±)-α-2-piperidinyl-2,8-bis (trifluoromethyl)-4-quinolinemethanol hydrochloride. It is a 2-aryl substituted chemical structural analog of quinine. The drug is a white to almost white crystalline compound, slightly soluble in water. Mefloquine hydrochloride has a calculated molecular weight of 414.78 and the following structural formula. Mefloquine Hydrochloride Tablets USP, 250 mg meets USP Dissolution Test 2. The inactive ingredients are crospovidone, lactose monohydrate, low-substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, pregelatinized starch and talc.</Description>
</NDC>
<NDC>
<NDCCode>36000-262-25</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (36000-262-25) / 2 mL in 1 VIAL, SINGLE-DOSE (36000-262-01) </PackageDescription>
<NDC11Code>36000-0262-25</NDC11Code>
<ProductNDC>36000-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexmedetomidine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dexmedetomidine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20260416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208103</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>DEXMEDETOMIDINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC], General Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexmedetomidine Injection, USP (100 mcg/mL) is a sterile, nonpyrogenic solution suitable for intravenous infusion following dilution. Dexmedetomidine Injection, USP contains dexmedetomidine hydrochloride, USP as the active pharmaceutical ingredient. Dexmedetomidine hydrochloride, USP is a central alpha2-adrenergic agonist. Dexmedetomidine hydrochloride, USP is the S-enantiomer of medetomidine. Dexmedetomidine hydrochloride, USP chemical name is 1H-Imidazole, 4-[1-(2,3-dimethylphenyl)ethyl]-, monohydrochloride, (S). Dexmedetomidine hydrochloride, USP has a molecular weight of 236.7 g/mol and the empirical formula is C13H16N2 HCl and the structural formula is. Dexmedetomidine hydrochloride, USP is solid, white, or almost white powder that is freely soluble in water and alcohol, slightly soluble in methylene chloride and acetone and has a pKa of 7.1. Its partition coefficient in-octanol: water at pH 7.4 is 2.89. Dexmedetomidine Injection, USP intended to be used after dilution. It is supplied as a clear, colorless, isotonic solution with a pH between 4.5 to 7.0. Each mL contains 118 mcg of dexmedetomidine hydrochloride, USP (equivalent to 100 mcg or 0.1 mg of dexmedetomidine) and 9 mg of sodium chloride in water for injection. The solution is preservative-free and contains no additives or chemical stabilizers.</Description>
</NDC>
<NDC>
<NDCCode>55150-262-03</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (55150-262-03) / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55150-0262-03</NDC11Code>
<ProductNDC>55150-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Methylprednisolone Sodium Succinate</ProprietaryName>
<NonProprietaryName>Methylprednisolone Sodium Succinate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20151215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207667</ApplicationNumber>
<LabelerName>Eugia US LLC</LabelerName>
<SubstanceName>METHYLPREDNISOLONE SODIUM SUCCINATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151215</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>When oral therapy is not feasible, and the strength, dosage form, and route of administration of the drug reasonably lend the preparation to the treatment of the condition, the intravenous or intramuscular use of methylprednisolone sodium succinate for injection is indicated as follows:. Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis (systemic therapy) and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, congenital (erythroid) hypoplastic anemia (Diamond-Blackfan anemia), idiopathic thrombocytopenic purpura in adults (intravenous administration only; intramuscular administration is contraindicated), pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used concurrently with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous System: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor, or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, uveitis and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis. Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, temporal arteritis, polymyositis, and systemic lupus erythematosus.</IndicationAndUsage>
<Description>Methylprednisolone sodium succinate for injection, USP is an anti-inflammatory glucocorticoid, which contains methylprednisolone sodium succinate as the active ingredient. Methylprednisolone sodium succinate USP, is the sodium succinate ester of methylprednisolone, and it occurs as a white, or nearly white, odorless hygroscopic, amorphous solid. It is very soluble in water and in alcohol; it is insoluble in chloroform and is very slightly soluble in acetone. Methylprednisolone sodium succinate USP is the sodium salt of methylprednisolone hemisuccinate USP, which is formed in situ, with the aid of sodium hydroxide. The chemical name for methylprednisolone sodium succinate is pregna-1,4-diene-3,20-dione,21-(3-carboxy-1-oxopropoxy)-11,17-dihydroxy-6-methyl-monosodium salt, (6α, 11β), and the molecular weight is 496.53. The structural formula is represented below: Methylprednisolone sodium succinate USP is soluble in water; it may be administered in a small volume of diluent and is well suited for intravenous use in situations where high blood levels of methylprednisolone are required rapidly.Methylprednisolone sodium succinate for injection, USP is a sterile, white color lyophilized cake, available in preservative and preservative-free formulations: 40 mg (Single-Dose Vial): Each mL (when mixed with 1 mL of Water for Injection USP) contains 53 mg of methylprednisolone sodium succinate USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; 25 mg lactose hydrous. This package does not contain diluent. Each mL (when mixed with 1 mL of Bacteriostatic Water for Injection USP) contains 53 mg of methylprednisolone sodium succinate USP equivalent to 40 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.46 mg dibasic sodium phosphate dried; 25 mg lactose hydrous. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 125 mg (Single-Dose Vial): Each 2 mL (when mixed with 2 mL of Water for Injection USP) contains 165.74 mg of methylprednisolone sodium succinate USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. Each 2 mL (when mixed with 2 mL of Bacteriostatic Water for Injection USP) contains 165.74 mg of methylprednisolone sodium succinate USP equivalent to 125 mg methylprednisolone; also 1.6 mg monobasic sodium phosphate anhydrous; 17.4 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 500 mg (Multiple-Dose Vial): Each 8 mL (when mixed with 8 mL of Bacteriostatic Water for Injection USP) contains 663 mg of methylprednisolone sodium succinate USP equivalent to 500 mg methylprednisolone; also 6.4 mg monobasic sodium phosphate anhydrous; 69.6 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. 2 grams (Single-Dose Vial): Each 30.6 mL (when mixed with 30 mL of Bacteriostatic Water for Injection USP) contains 2.65 grams of methylprednisolone sodium succinate USP equivalent to 2 grams methylprednisolone; also 25.6 mg monobasic sodium phosphate anhydrous; 278 mg dibasic sodium phosphate dried. This package does not contain diluent. Recommended diluent (Bacteriostatic water) contains benzyl alcohol as a preservative. IMPORTANT — Use only Water for Injection or Bacteriostatic Water for Injection with Benzyl Alcohol as described above when reconstituting methylprednisolone sodium succinate for injection, USP. Use within 48 hours after mixing. When necessary, the pH of each formula was adjusted with sodium hydroxide so that the pH of the reconstituted solution is within the USP specified range of 7 to 8.</Description>
</NDC>
<NDC>
<NDCCode>63323-262-01</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-01) / 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0262-01</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preservative free, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each 0.5 mL of the 5,000 units per 0.5 mL preparation contains: 5,000 USP Heparin units (porcine); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with benzyl alcohol, is available as follows:. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 6 mg sodium chloride; 15 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 5 mg sodium chloride; 10.42 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 20,000 units per mL preparation contains: 20,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-262-06</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-06) / 1 mL in 1 VIAL (63323-262-03) </PackageDescription>
<NDC11Code>63323-0262-06</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200325</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits):.</Description>
</NDC>
<NDC>
<NDCCode>63323-262-26</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-26) / 1 mL in 1 VIAL (63323-262-09) </PackageDescription>
<NDC11Code>63323-0262-26</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200325</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-262-36</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-36) > 1 mL in 1 VIAL (63323-262-11) </PackageDescription>
<NDC11Code>63323-0262-36</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200302</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-262-55</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-55) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0262-55</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>67877-262-25</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (67877-262-25) > 6 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67877-0262-25</NDC11Code>
<ProductNDC>67877-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rizatriptan Benzoate</ProprietaryName>
<NonProprietaryName>Rizatriptan Benzoate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120625</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203269</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>RIZATRIPTAN BENZOATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-10-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120625</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Rizatriptan benzoate tablets are indicated for the acute treatment of migraine with or without aura in adults and in pediatric patients 6 to 17 years old.Limitations of Use: 1 Rizatriptan benzoate tablets should only be used where a clear diagnosis of migraine has been established. If a patient has no response for the first migraine attack treated with rizatriptan benzoate tablets, the diagnosis of migraine should be reconsidered before rizatriptan benzoate tablets are administered to treat any subsequent attacks., 2 Rizatriptan benzoate tablets are not indicated for use in the management of hemiplegic or basilar migraine [see Contraindications (4)]. , 3 Rizatriptan benzoate tablets are not indicated for the prevention of migraine attacks. , 4 Safety and effectiveness of rizatriptan benzoate tablets have not been established for cluster headache. .</IndicationAndUsage>
<Description>Rizatriptan benzoate tablet, USP contains rizatriptan benzoate, a selective 5-hydroxytryptamine1B/1D (5-HT1B/1D) receptor agonist.Rizatriptan benzoate is described chemically as: N,N-dimethyl-5-(1H-1,2,4-triazol-1-ylmethyl)-1H-indole-3-ethanamine monobenzoate and its structural formula is. Its empirical formula is C15H19N5C7H6O2, representing a molecular weight of the free base of 269.4. Rizatriptan benzoate is a white to off-white, crystalline solid that is soluble in water at about 42 mg per mL (expressed as free base) at 25°C.Rizatriptan benzoate Tablets, USP are available for oral administration in strengths of 5 and 10 mg (corresponding to 7.265 mg or 14.53 mg of the benzoate salt, respectively). Each compressed tablet contains the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pregelatinized starch (maize), and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>69039-262-00</NDCCode>
<PackageDescription>4.25 g in 1 CARTRIDGE (69039-262-00) </PackageDescription>
<NDC11Code>69039-0262-00</NDC11Code>
<ProductNDC>69039-262</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sun Bum Tinted Spf15 Sunscreen Pinkini</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Octisalate</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180415</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Sun Bum LLC</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OCTISALATE</SubstanceName>
<StrengthNumber>19; 71; 49</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>0603-0235-16</NDCCode>
<PackageDescription>30 TABLET, CHEWABLE in 1 CARTON (0603-0235-16)</PackageDescription>
<NDC11Code>00603-0235-16</NDC11Code>
<ProductNDC>0603-0235</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Pink Bismuth</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030428</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>Qualitest Pharmaceuticals</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-10-25</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>0703-5656-01</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (0703-5656-01) / 25 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>00703-5656-01</NDC11Code>
<ProductNDC>0703-5656</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Toposar</ProprietaryName>
<NonProprietaryName>Etoposide</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19960801</StartMarketingDate>
<EndMarketingDate>20240131</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074529</ApplicationNumber>
<LabelerName>Teva Parenteral Medicines, Inc.</LabelerName>
<SubstanceName>ETOPOSIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-02-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19960801</StartMarketingDatePackage>
<EndMarketingDatePackage>20240131</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Toposar (etoposide injection) is indicated in the management of the following neoplasms.</IndicationAndUsage>
<Description>Toposar® (etoposide injection USP) (also commonly known as VP-16) is a semisynthetic derivative of podophyllotoxin used in the treatment of certain neoplastic diseases. It is 4'-demethylepipodophyllotoxin 9-[4,6-0-(R)-ethylidene-β-D-glucopyranoside]. It is very soluble in methanol and chloroform, slightly soluble in ethanol, and sparingly soluble in water and ether. It is made more miscible with water by means of organic solvents. Toposar (etoposide injection USP) is available for intravenous use as a sterile 20 mg/mL solution in 100 mg (5 mL), 500 mg (25 mL), or 1 g (50 mL) sterile, multiple dose vials. The pH of the clear, yellow liquid is 3.0 to 4.0. Each mL contains: 20 mg etoposide, USP, 2 mg citric acid anhydrous, 80 mg polysorbate 80, 650 mg polyethylene glycol 300 (57.5% v/v and 65.0% w/v), and 262 mg dehydrated alcohol (33.2% v/v and 26.2% w/v). The structural formula is. C29H32O13 M.W. 588.56.</Description>
</NDC>
<NDC>
<NDCCode>11822-0319-0</NDCCode>
<PackageDescription>5 POUCH in 1 CARTON (11822-0319-0) > 6 TABLET, CHEWABLE in 1 POUCH</PackageDescription>
<NDC11Code>11822-0319-00</NDC11Code>
<ProductNDC>11822-0319</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stomach Relief</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19980716</StartMarketingDate>
<EndMarketingDate>20220812</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>Rite Aid Corporation</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-05-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19980716</StartMarketingDatePackage>
<EndMarketingDatePackage>20220812</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16714-262-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (16714-262-01) </PackageDescription>
<NDC11Code>16714-0262-01</NDC11Code>
<ProductNDC>16714-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amitriptyline Hydrochloride</ProprietaryName>
<NonProprietaryName>Amitriptyline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210825</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210086</ApplicationNumber>
<LabelerName>Northstar Rx LLC.</LabelerName>
<SubstanceName>AMITRIPTYLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210825</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the relief of symptoms of depression. Endogenous depression is more likely to be alleviated than are other depressive states.</IndicationAndUsage>
<Description>Amitriptyline hydrochloride USP, a dibenzocycloheptadiene derivative, is a white, or practically white, odorless or practically odorless, crystalline powder or small crystals and freely soluble in water, alcohol, chloroform and methanol and insoluble in ether. It is designated chemically as 10,11-Dihydro-N,N-dimethyl-5H-dibenzo[a,d] cycloheptene-Δ5, γ-propylamine hydrochloride. It has the following structural formula. Each amitriptyline hydrochloride tablet, USP for oral administration contains 10 mg, 25 mg, 50 mg, 75 mg, 100 mg, or 150 mg amitriptyline hydrochloride, USP. Inactive ingredients are: croscarmellose sodium, colloidal silicon dioxide, hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch (corn), talc, and titanium dioxide. Additionally. 25 mg tablets contain: D&C Yellow #10 Aluminum Lake and FD&C Blue #1 Aluminum Lake;. 50 mg tablets contain: D&C Yellow #10 Aluminum Lake, iron oxide red and iron oxide yellow;. 75 mg tablets contain: FD&C Blue #2 Aluminum Lake and iron oxide yellow;. 100 mg tablets contain: D&C Red #27 Aluminum Lake and D&C Yellow #10 Aluminum Lake;. 150 mg tablets contain: iron oxide red and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>31722-262-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (31722-262-01) </PackageDescription>
<NDC11Code>31722-0262-01</NDC11Code>
<ProductNDC>31722-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212414</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: Multiple myeloma (MM), in combination with dexamethasone ( 1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) ( 1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities ( 1.2). Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib ( 1.3). Previously treated follicular lymphoma (FL), in combination with a rituximab product ( 1.4). Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product ( 1.5). Limitations of Use: Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials ( 1.4).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C 13H 13N 3O 3, and the gram molecular weight is 259.27. Lenalidomide is an off-white to pale-yellow powder. It is slightly soluble in dimethyl formamide. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The capsule shell contains gelatin, titanium dioxide, in addition 2.5 mg, 15 mg, and 20 mg contains iron oxide red, 10 mg contains FD&C Yellow 6, 20 mg contains iron oxide yellow and iron oxide black. The capsules are imprinted with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>31722-262-21</NDCCode>
<PackageDescription>21 CAPSULE in 1 BOTTLE (31722-262-21) </PackageDescription>
<NDC11Code>31722-0262-21</NDC11Code>
<ProductNDC>31722-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lenalidomide</ProprietaryName>
<NonProprietaryName>Lenalidomide</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230511</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212414</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LENALIDOMIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Thalidomide Analog [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230511</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lenalidomide is a thalidomide analogue indicated for the treatment of adult patients with: Multiple myeloma (MM), in combination with dexamethasone ( 1.1). MM, as maintenance following autologous hematopoietic stem cell transplantation (auto-HSCT) ( 1.1). Transfusion-dependent anemia due to low- or intermediate-1-risk myelodysplastic syndromes (MDS) associated with a deletion 5q abnormality with or without additional cytogenetic abnormalities ( 1.2). Mantle cell lymphoma (MCL) whose disease has relapsed or progressed after two prior therapies, one of which included bortezomib ( 1.3). Previously treated follicular lymphoma (FL), in combination with a rituximab product ( 1.4). Previously treated marginal zone lymphoma (MZL), in combination with a rituximab product ( 1.5). Limitations of Use: Lenalidomide capsules are not indicated and are not recommended for the treatment of patients with chronic lymphocytic leukemia (CLL) outside of controlled clinical trials ( 1.4).</IndicationAndUsage>
<Description>Lenalidomide, a thalidomide analogue, is an immunomodulatory agent with antiangiogenic and antineoplastic properties. The chemical name is 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione and it has the following chemical structure:. 3-(4-amino-1-oxo 1,3-dihydro-2 H-isoindol-2-yl) piperidine-2,6-dione. The empirical formula for lenalidomide is C 13H 13N 3O 3, and the gram molecular weight is 259.27. Lenalidomide is an off-white to pale-yellow powder. It is slightly soluble in dimethyl formamide. Solubility was significantly lower in less acidic buffers, ranging from about 0.4 to 0.5 mg/ml. Lenalidomide has an asymmetric carbon atom and can exist as the optically active forms S(-) and R(+), and is produced as a racemic mixture with a net optical rotation of zero. Lenalidomide is available in 2.5 mg, 5 mg, 10 mg, 15 mg, 20 mg and 25 mg capsules for oral administration. Each capsule contains lenalidomide as the active ingredient and the following inactive ingredients: anhydrous lactose, croscarmellose sodium, magnesium stearate and microcrystalline cellulose. The capsule shell contains gelatin, titanium dioxide, in addition 2.5 mg, 15 mg, and 20 mg contains iron oxide red, 10 mg contains FD&C Yellow 6, 20 mg contains iron oxide yellow and iron oxide black. The capsules are imprinted with ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac, and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>37000-262-50</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (37000-262-50) > 50 mL in 1 BOTTLE, PUMP</PackageDescription>
<NDC11Code>37000-0262-50</NDC11Code>
<ProductNDC>37000-262</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Olay Regenerist Dna Superstructure Uv</ProprietaryName>
<ProprietaryNameSuffix>Spf 30</ProprietaryNameSuffix>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene, And Oxybenzone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<EndMarketingDate>20140601</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE; OCTOCRYLENE; OXYBENZONE</SubstanceName>
<StrengthNumber>29.4; 147; 49; 25.4; 58.8</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-06-03</LastUpdate>
</NDC>
<NDC>
<NDCCode>37808-346-08</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (37808-346-08) / 24 TABLET in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>37808-0346-08</NDC11Code>
<ProductNDC>37808-346</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stomach Relief</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110506</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M008</ApplicationNumber>
<LabelerName>H E B</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>relieves: 1 travelers' diarrhea, 2 diarrhea, 3 upset stomach due to overindulgence in food and drink, including:heartburnindigestionnauseagasbelchingfullness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42546-185-30</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (42546-185-30) > 1 KIT in 1 BLISTER PACK</PackageDescription>
<NDC11Code>42546-0185-30</NDC11Code>
<ProductNDC>42546-185</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bal-care Dha Essential</ProprietaryName>
<NonProprietaryName>Beta Carotene, Ascorbic Acid, Cholecalciferol, .alpha.-tocopherol Acetate, Dl-, Thiamine Mononitrate, Riboflavin, Niacinamide, Pyridoxine Hydrochloride, Folic Acid, Cyanocobalamin, Calcium Carbonate, Sodium Feredetate, Magnesium Oxide, Zinc Oxide, Cupric Oxide, Iron Sucrose, Iodine, Omega 3 Fatty Acids</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20120501</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>PruGen, Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<Description>SUPPLEMENT FACTSServing Size 1 Tablet:VITAMINSA (beta carotene) . . . . . . . . . . . . . . . . . . . . . . . . . . 2,850 IU 36% Daily ValueC (ascorbic acid) . . . . . . . . . . . . . . . . . . . . . . . . . . 120 mg 200% Daily ValueD (cholecalciferol) . . . . . . . . . . . . . . . . . . . . . . . . .840 IU 210% Daily ValueE (dl-alpha tocopheryl acetate) . . . . . . . . . . . . . .3 mg 10% Daily ValueB1 (thiamine mononitrate) . . . . . . . . . . . . . . . . . . .1.8 mg 106% Daily ValueB2 (riboflavin) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 mg 200% Daily ValueNiacinamide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 mg 100% Daily ValueB6 (pyridoxine hydrochloride) . . . . . . . . . . . . . . .50 mg 2000% Daily ValueFolic acid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 mg 125% Daily ValueB12 (cyanocobalamin) . . . . . . . . . . . . . . . . . . . . . . 12 mcg 150% Daily Value MINERALSCalcium (calcium carbonate) . . . . . . . . . . . . . . . . 219 mg 17% Daily ValueIron (as sodium iron EDTA and polysaccharide iron complex) . . .27 mg 150% Daily ValueMagnesium (magnesium oxide) . . . . . . . . . . . . . 25 mg 6% Daily ValueZinc (zinc oxide) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 mg 167% Daily ValueCopper (cupric oxide) . . . . . . . . . . . . . . . . . . . . . . . .2 mg 100% Daily ValueService Size 1 Softgel:374 mg purified omega-3 fatty acids including:At least 262 mg DHA (docosahexaenoic acid); also contains at least 112 mg of other omega-3 fatty acids.OTHER TABLET INGREDIENTS:Microcrystalline Cellulose, Hydroxypropyl Methylcellulose, Crospovidone, Maltodextrin, Acacia Gum, Silicon Dioxide, Triacetin, Magnesium Stearate, Titanium Dioxide, Polydextrose, Yellow #6 Lake, Blue #2 Lake, Red #40 Lake.OTHER SOFTGEL INGREDIENTS: Ammonium Hydroxide, Ethylcellulose, Gelatin, Glycerin, Medium Chain Triglycerides, Oleic Acid, Sodium Alginate, Stearic Acid, Vanillin.Softgel contains fish and soybeans.</Description>
</NDC>
<NDC>
<NDCCode>42961-021-02</NDCCode>
<PackageDescription>42 g in 1 BOX (42961-021-02) </PackageDescription>
<NDC11Code>42961-0021-02</NDC11Code>
<ProductNDC>42961-021</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zee Pept-eez</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211025</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>Cintas Corp</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-03-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>47682-220-13</NDCCode>
<PackageDescription>250 PACKET in 1 BOX, UNIT-DOSE (47682-220-13) > 2 TABLET, CHEWABLE in 1 PACKET (47682-220-99)</PackageDescription>
<NDC11Code>47682-0220-13</NDC11Code>
<ProductNDC>47682-220</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medique Diotame</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081230</StartMarketingDate>
<EndMarketingDate>20170722</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>Unifirst First Aid Corporation</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-07-25</LastUpdate>
</NDC>
<NDC>
<NDCCode>47682-220-33</NDCCode>
<PackageDescription>50 PACKET in 1 BOX, UNIT-DOSE (47682-220-33) > 2 TABLET, CHEWABLE in 1 PACKET (47682-220-99)</PackageDescription>
<NDC11Code>47682-0220-33</NDC11Code>
<ProductNDC>47682-220</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medique Diotame</ProprietaryName>
<NonProprietaryName>Bismuth Subsalicylate</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081230</StartMarketingDate>
<EndMarketingDate>20170722</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part335</ApplicationNumber>
<LabelerName>Unifirst First Aid Corporation</LabelerName>
<SubstanceName>BISMUTH SUBSALICYLATE</SubstanceName>
<StrengthNumber>262</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-07-25</LastUpdate>
</NDC>
</NDCList>