RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>62135-480-49</NDCCode>
    <PackageDescription>200 mL in 1 BOTTLE (62135-480-49) </PackageDescription>
    <NDC11Code>62135-0480-49</NDC11Code>
    <ProductNDC>62135-480</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065336</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O          M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: strawberry powder, methylcellulose, sodium lauryl sulfate, sucrose and FD&amp;C Red No. 40.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-481-49</NDCCode>
    <PackageDescription>200 mL in 1 BOTTLE (62135-481-49) </PackageDescription>
    <NDC11Code>62135-0481-49</NDC11Code>
    <ProductNDC>62135-481</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065336</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O          M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: strawberry powder, methylcellulose, sodium lauryl sulfate, sucrose and FD&amp;C Red No. 40.</Description>
  </NDC>
  <NDC>
    <NDCCode>71970-303-49</NDCCode>
    <PackageDescription>480 mL in 1 BOTTLE (71970-303-49) </PackageDescription>
    <NDC11Code>71970-0303-49</NDC11Code>
    <ProductNDC>71970-303</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Active Again</ProprietaryName>
    <NonProprietaryName>Menthol</NonProprietaryName>
    <DosageFormName>LOTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20180830</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part348</ApplicationNumber>
    <LabelerName>Hope Science Inc</LabelerName>
    <SubstanceName>MENTHOL</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180830</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62135-250-47</NDCCode>
    <PackageDescription>480 mL in 1 BOTTLE (62135-250-47) </PackageDescription>
    <NDC11Code>62135-0250-47</NDC11Code>
    <ProductNDC>62135-250</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisolone</ProprietaryName>
    <NonProprietaryName>Prednisolone Oral</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20221120</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040323</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>PREDNISOLONE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-06-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Prednisolone Oral Solution, USP is indicated in the following conditions. 1. Endocrine Disorders. Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the first choice: synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy mineralocorticoid supplementation is of particular importance).    Congenital adrenal hyperplasia    Nonsuppurative thyroiditis    Hypercalcemia associated with cancer. 2. Rheumatic Disorders. As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in.    Psoriatic arthritis    Rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy)    Ankylosing spondylitis    Acute and subacute bursitis    Acute nonspecific tenosynovitis    Acute gouty arthritis    Post-traumatic osteoarthritis    Synovitis of osteoarthritis    Epicondylitis. 3. Collagen Diseases. During an exacerbation or as maintenance therapy in selected cases of.    Systemic lupus erythematosus    Acute rheumatic carditis. 4. Dermatologic Diseases.    Pemphigus    Bullous dermatitis herpetiformis    Severe erythema multiforme (Stevens-Johnson syndrome)    Exfoliative dermatitis    Mycosis fungoides    Severe psoriasis    Severe seborrheic dermatitis. 5. Allergic States. Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment.    Seasonal or perennial allergic rhinitis    Bronchial asthma    Contact dermatitis    Atopic dermatitis    Serum sickness    Drug hypersensitivity reactions. 6. Ophthalmic Diseases. Severe acute and chronic allergic and inflammatory processes involving the eye and its adnexa such as.    Allergic corneal marginal ulcers    Herpes zoster ophthalmicus    Anterior segment inflammation    Diffuse posterior uveitis and choroiditis    Sympathetic ophthalmia    Allergic conjunctivitis    Keratitis    Chorioretinitis    Optic neuritis    Iritis and iridocyclitis. 7. Respiratory Diseases. Symptomatic sarcoidosis Loeffler’s syndrome not manageable by other means.    Berylliosis    Fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate chemotherapy    Aspiration pneumonitis. 8. Hematologic Disorders.    Idiopathic thrombocytopenic purpura in adults    Secondary thrombocytopenia in adults    Acquired (autoimmune) hemolytic anemia    Erythroblastopenia (RBC anemia)    Congenital (erythroid) hypoplastic anemia. 9. Neoplastic Diseases. For palliative management of.    Acute leukemia of childhood    Leukemias and lymphomas in adults. 10. Edematous States. To induce a diuresis or remission of proteinuria in the nephrotic syndrome, without uremia, of the idiopathic type or that due to lupus erythematosus. 11. Gastrointestinal Diseases. To tide the patient over a critical period of the disease in.    Ulcerative colitis    Regional enteritis. 12. Miscellaneous. Tuberculous meningitis with subarachnoid block or impending block used concurrently with appropriate antituberculous chemotherapy. Trichinosis with neurologic or myocardial involvement. In addition to the above indications prednisolone oral solution is indicated for systemic dermatomyositis (polymyositis).</IndicationAndUsage>
    <Description>Prednisolone oral solution contains prednisolone which is a glucocorticoid. Glucocorticoids are adrenocortical steroids, both naturally occurring and synthetic, which are readily absorbed from the gastrointestinal tract. Prednisolone is a white to practically white, odorless, crystalline powder. It is very slightly soluble in water, soluble in methanol and in dioxane; sparingly soluble in acetone and in alcohol, slightly soluble in chloroform. The chemical name for Prednisolone is Pregna-1,4 -diene -3, 20 - dione, 11, 17, 21- trihydroxy-,(11β). Its molecular weight is 360.45. The molecular formula is C 21H 28O 5 and the structural formula is:. Prednisolone oral solution contains 15 mg of prednisolone in each 5 mL. Benzoic acid, 0.1% is added as a preservative. It also contains ethyl alcohol 5% (v/v), citric acid, edetate disodium, glycerin, propylene glycol, purified water, saccharin sodium, sucrose, natural and artificial wild cherry flavor, FD&amp;C red #40.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-480-42</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (62135-480-42) </PackageDescription>
    <NDC11Code>62135-0480-42</NDC11Code>
    <ProductNDC>62135-480</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cephalexin</ProprietaryName>
    <NonProprietaryName>Cephalexin</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180228</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065336</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>CEPHALEXIN</SubstanceName>
    <StrengthNumber>125</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid, monohydrate. Cephalexin, USP has the following structural formula. C 16H 17N 3O 4SH 2O          M.W. 365.41. The nucleus of cephalexin, USP is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin, USP in water is approximately 4.5 to 5. The crystalline form of cephalexin, USP which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin, USP has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. After mixing, each 5 mL of cephalexin for oral suspension USP will contain cephalexin monohydrate, USP equivalent to 125 mg (360 μmol) or 250 mg (720 μmol) of cephalexin. Inactive Ingredients: strawberry powder, methylcellulose, sodium lauryl sulfate, sucrose and FD&amp;C Red No. 40.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-225-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (62135-225-01) </PackageDescription>
    <NDC11Code>62135-0225-01</NDC11Code>
    <ProductNDC>62135-225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-225-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (62135-225-05) </PackageDescription>
    <NDC11Code>62135-0225-05</NDC11Code>
    <ProductNDC>62135-225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-225-20</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE (62135-225-20) </PackageDescription>
    <NDC11Code>62135-0225-20</NDC11Code>
    <ProductNDC>62135-225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-225-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (62135-225-60) </PackageDescription>
    <NDC11Code>62135-0225-60</NDC11Code>
    <ProductNDC>62135-225</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>250</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-266-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (62135-266-01) </PackageDescription>
    <NDC11Code>62135-0266-01</NDC11Code>
    <ProductNDC>62135-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-266-05</NDCCode>
    <PackageDescription>500 CAPSULE in 1 BOTTLE (62135-266-05) </PackageDescription>
    <NDC11Code>62135-0266-05</NDC11Code>
    <ProductNDC>62135-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-266-20</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE (62135-266-20) </PackageDescription>
    <NDC11Code>62135-0266-20</NDC11Code>
    <ProductNDC>62135-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-266-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (62135-266-60) </PackageDescription>
    <NDC11Code>62135-0266-60</NDC11Code>
    <ProductNDC>62135-266</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tetracycline Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tetracycline Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19880812</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062752</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>TETRACYCLINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Antimicrobial [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of tetracycline hydrochloride and other antibacterial drugs, tetracycline hydrochloride should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Tetracycline is indicated in the treatment of infections caused by susceptible strains of the designated organisms in the conditions listed below: 1 Upper respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae and  Hemophilus influenzae. Note: Tetracycline should not be used for streptococcal disease unless the organism has been demonstrated to be susceptible. , 2 Lower respiratory tract infections caused by  Streptococcus pyogenes, Streptococcus pneumoniae, Mycoplasma pneumoniae (Eaton agent, and  Klebsiellasp .) , 3 Skin and soft tissue infections caused by  Streptococcus pyogenes, Staphylococcus aureaus. (Tetracyclines are not the drugs of choice in the treatment of any type of staphylococcal infections.) , 4 Infections caused by rickettsia including Rocky Mountain spotted fever, typhus group infections, Q fever, rickettsialpox. , 5 Psittacosis caused by  Chlamydophila psittaci., 6 Infections caused by  Chlamydia trachomatis such as uncomplicated urethral, endocervical or rectal infections, inclusion conjunctivitis, trachoma, and lymphogranuloma venereum. , 7 Granuloma inquinale caused by  Klebsiella granulomatis. , 8 Relapsing fever caused by  Borreliasp. , 9 Bartonellosis caused by  Bartonella bacilliformis. , 10 Chancroid caused by  Hemophilus ducreyi. , 11 Tularemia caused by  Francisella tularensis. , 12 Plaque caused by  Yersinia pestis. , 13 Cholera caused by  Vibrio cholerae. , 14 Brucellosis caused by  Brucella species (tetracycline may be used in conjunction with an aminoglycoside). , 15 Infections due to  Campylobacter fetus. , 16 As adjunctive therapy in intestinal amebiasis caused by  Entamoeba histolytica. , 17 Urinary tract infections caused by susceptible strains of  Escherichia coli, Klebsiella,etc. , 18 Other infections caused by susceptible gram-negative organisms such as  E. coli, Enterobacter aerogenes, Shigellasp ., Acinetobactersp ., Klebsiellasp. ,and  Bacteroidessp. , 19 In severe acne, adjunctive therapy with tetracycline may be useful.</IndicationAndUsage>
    <Description>Tetracycline is a yellow, odorless, crystalline powder. Tetracycline is stable in air but exposure to strong sunlight causes it to darken. Its potency is affected in solutions of pH below 2 and is rapidly destroyed by alkali hydroxide solutions. Tetracycline is very slightly soluble in water, freely soluble in dilute acid and in alkali hydroxide solutions, sparingly soluble in alcohol, and practically insoluble in chloroform and in ether. The chemical name for tetracycline hydrochloride is 4-(Dimethylamino) -1,4,4a,5,5a,6,11,12a-octahydro-3,6,10,12,-12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. Its structural formula is as follows. C 22H 24N 20 8·HCI    M.W. 480.90. Each capsule, for oral administration, contains 250 mg or 500 mg tetracycline hydrochloride. Inactive Ingredients: Lactose, and magnesium stearate. The 250 mg and 500 mg capsule shells contain D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The imprinting ink for the 250 mg and 500 mg capsules contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Blue No. 2, FD&amp;C Red No. 40, iron oxide black, pharmaceutical shellac glaze, propylene glycol, n-butyl alcohol, and ferrosoferric oxide. This product complies with USP dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-600-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-600-60) </PackageDescription>
    <NDC11Code>62135-0600-60</NDC11Code>
    <ProductNDC>62135-600</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-601-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-601-60) </PackageDescription>
    <NDC11Code>62135-0601-60</NDC11Code>
    <ProductNDC>62135-601</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-602-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-602-60) </PackageDescription>
    <NDC11Code>62135-0602-60</NDC11Code>
    <ProductNDC>62135-602</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-603-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-603-60) </PackageDescription>
    <NDC11Code>62135-0603-60</NDC11Code>
    <ProductNDC>62135-603</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-604-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-604-60) </PackageDescription>
    <NDC11Code>62135-0604-60</NDC11Code>
    <ProductNDC>62135-604</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-605-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-605-60) </PackageDescription>
    <NDC11Code>62135-0605-60</NDC11Code>
    <ProductNDC>62135-605</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110518</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077543</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Risperidone is an atypical antipsychotic indicated for: 1 Treatment of schizophrenia ( 1.1) , 2 As monotherapy or adjunctive therapy with lithium or valproate, for the treatment of acute manic or mixed episodes associated with Bipolar I Disorder ( 1.2) , 3 Treatment of irritability associated with autistic disorder ( 1.3) .</IndicationAndUsage>
    <Description>Risperidone Tablets, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 NHCl. Risperidone Tablets, USP are available in 0.25 mg (light orange), 0.5 mg (orange), 1 mg (white), 2 mg (white), 3 mg (white), and 4 mg (white) strengths. Each tablet for oral administration contains the following inactive ingredients: corn starch, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate and titanium dioxide. In addition the 0.25 mg and 0.5 mg also contain FD&amp;C yellow #6.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-929-43</NDCCode>
    <PackageDescription>30 mL in 1 BOTTLE (62135-929-43) </PackageDescription>
    <NDC11Code>62135-0929-43</NDC11Code>
    <ProductNDC>62135-929</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Risperidone</ProprietaryName>
    <NonProprietaryName>Risperidone</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150112</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202386</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RISPERIDONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220728</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Risperidone Oral Solution, USP contains risperidone, an atypical antipsychotic belonging to the chemical class of benzisoxazole derivatives. The chemical designation is 3-[2-[4-(6-fluoro-1,2-benzisoxazol-3-yl)-1-piperidinyl]ethyl]-6,7,8,9-tetrahydro-2-methyl-4H-pyrido[1,2-a]pyrimidin-4-one. Its molecular formula is C 23H 27FN 4O 2 and its molecular weight is 410.49. The structural formula is:. Risperidone is a white to slightly beige powder. It is practically insoluble in water, freely soluble in methylene chloride, and soluble in methanol and 0.1 N HCl. Risperidone Oral Solution, USP is available as a 1 mg/mL oral solution. Risperidone Oral Solution, USP contains the following inactive ingredients: benzoic acid, sorbitol, and purified water.</Description>
  </NDC>
  <NDC>
    <NDCCode>59088-480-58</NDCCode>
    <PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (59088-480-58) </PackageDescription>
    <NDC11Code>59088-0480-58</NDC11Code>
    <ProductNDC>59088-480</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Foliflex</ProprietaryName>
    <NonProprietaryName>Ferrous Fumarate, Folic Acid</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20211025</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>PureTek Corporation</LabelerName>
    <SubstanceName>VITAMIN A ACETATE; ASCORBIC ACID; CHOLECALCIFEROL; .ALPHA.-TOCOPHEROL ACETATE, DL-; THIAMINE MONONITRATE; RIBOFLAVIN; NIACINAMIDE; PYRIDOXINE HYDROCHLORIDE; FOLIC ACID; CYANOCOBALAMIN; BIOTIN; PANTOTHENIC ACID; CALCIUM CARBONATE; FERROUS FUMARATE; POTASSIUM IODIDE; MAGNESIUM OXIDE; ZINC OXIDE; SELENIUM; CUPROUS OXIDE; MANGANESE SULFATE; CHROMIUM NICOTINATE; MOLYBDENUM; POTASSIUM CHLORIDE; BORON</SubstanceName>
    <StrengthNumber>1500; 250; 13.75; 45; 3.25; 3.35; 22.5; 6; 500; 13; 100; 15; 75; 9; 25; 37.5; 15; 30; 1; .75; 37.5; 25; 24.5; 25</StrengthNumber>
    <StrengthUnit>ug/1; mg/1; ug/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; ug/1; ug/1; mg/1; mg/1; mg/1; ug/1; mg/1; mg/1; ug/1; mg/1; mg/1; ug/1; ug/1; mg/1; ug/1</StrengthUnit>
    <Pharm_Classes>Analogs/Derivatives [Chemical/Ingredient], Ascorbic Acid [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Copper Absorption Inhibitor [EPC], Decreased Copper Ion Absorption [PE], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Magnetic Resonance Contrast Activity [MoA], Nicotinic Acid [EPC], Nicotinic Acids [CS], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Paramagnetic Contrast Agent [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE], Vitamin A [CS], Vitamin A [EPC], Vitamin B 12 [CS], Vitamin B 6 [Chemical/Ingredient], Vitamin B12 [EPC], Vitamin B6 Analog [EPC], Vitamin C [EPC], Vitamin D [CS], Vitamin D [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-11-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20211025</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Foliflex TM is indicated for the treatment of iron deficiency anemia and folate deficiency as in extended convalescence, menorrhagia, pregnancy, puberty, excessive blood loss, and advanced age. Also for the treatment of the condition in which iron deficiency and vitamin C deficiency occur together, along with a deficient intake or increased need for B-Complex vitamins in chronic and acute illness, as well as cases of metabolic stress, and in convalescence.</IndicationAndUsage>
    <Description>Full Prescribing Information. Each Serving Size of 2 caplets contain. Vitamin A (as Retinyl Acetate) 3000 mcg RAE Vitamin C (as Ascorbic Acid) 500 mg Vitamin D3 (as Cholecalciferol) 27.5 mcg (1100 IU) Vitamin E (as DL-alpha Tocopheryl Acetate) 90 mg Thiamin (as Thiamine Mononitrate) 6.5 mg Riboflavin 6.7 mg Niacin (as Niacinamide) 45 mg Vitamin B6 (as Pyridoxine HCl) 12 mg Folate 1700 mcg DFE (as L-5-Methyltetrahydrofolate calcium salt) (1000 mcg as L-Methyfolate) Vitamin B12 (as Methylcobalamin) 26 mcg Biotin 200 mcg Pantothenic Acid (as Calcium Pantothenate) 30 mg Calcium (as Calcium Carbonate) 150 mg Iron (as Ferrous Fumarate) 18 mg Iodine (as Potassium Iodide) 50 mcg Magnesium (as Magnesium Oxide) 75 mg Zinc (as Zinc Gluconate) 30 mg Selenium (as Selenomethionine) 60 mcg Copper (as Copper Oxide) 2 mg Manganese (as Manganese Sulfate) 1.5 mg Chromium (as Chromium Polynicotinate) 75 mcg Molybdenum (as Sodium Molybdate) 50 mcg Potassium (as Potassium Chloride) 49 mg Boron (as Boron Citrate) 50 mcg. Other Ingredients: Microcrystalline Cellulose, Silicon Dioxide, Crospovidone, Magnesium Stearate, Coating:(Sodium Carboxymethylcellulose, Dextrose Monohydrate, Titanium Dioxide, Dextrin, Purified Stearic Acid, FD&amp;C Yellow #6/Sunset Yellow FCF Aluminum Lake).</Description>
  </NDC>
  <NDC>
    <NDCCode>70748-195-07</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-195-07) </PackageDescription>
    <NDC11Code>70748-0195-07</NDC11Code>
    <ProductNDC>70748-195</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213808</ApplicationNumber>
    <LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>24; 26</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250729</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>70748-196-07</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-196-07) </PackageDescription>
    <NDC11Code>70748-0196-07</NDC11Code>
    <ProductNDC>70748-196</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213808</ApplicationNumber>
    <LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>49; 51</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250729</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>70748-197-07</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (70748-197-07) </PackageDescription>
    <NDC11Code>70748-0197-07</NDC11Code>
    <ProductNDC>70748-197</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sacubitril And Valsartan</ProprietaryName>
    <NonProprietaryName>Sacubitril And Valsartan</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250729</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213808</ApplicationNumber>
    <LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>SACUBITRIL; VALSARTAN</SubstanceName>
    <StrengthNumber>97; 103</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Neprilysin Inhibitor [EPC], Neprilysin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250729</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sacubitril and valsartan tablets are a combination of sacubitril, a neprilisin inhibitor, and valsartan, an angiotensin II receptor blocker, and is indicated: 1 to reduce the risk of cardiovascular death and hospitalization for heart failure in adult patients with chronic heart failure and reduced ejection fraction. (1.1).</IndicationAndUsage>
    <Description>Sacubitril and valsartan tablets (sacubitril and valsartan) are a combination of a neprilysin inhibitor and an angiotensin II receptor blocker. Sacubitril and valsartan tablets contains sacubitril, sodium and valsartan, disodium. Following oral administration, sacubitril metabolizes to LBQ657. Sacubitril sodium is described chemically as 4-[[(2S,4R)-5-ethoxy-4-methyl-5-oxo-1-(4-phenylphenyl)pentan-2-yl]amino]-4-oxobutanoate; sodium salt with an empirical formula of C24H28NNaO5 and a molecular weight of 432.47 g/mol. The structural formula is. Valsartan is described chemically as N-[p-(o-1H-Tetrazol-5-ylphenyl)benzyl]-N-valeryl-L-valine, disodium salt with an empirical formula of C24H27N5Na2O3 and a molecular weight of 480.52 g/mol. The structural formula is. Sacubitril and valsartan tablets are available as film-coated tablets for oral administration, containing 24 mg of sacubitril and 26 mg of valsartan; 49 mg of sacubitril and 51 mg of valsartan; and 97 mg of sacubitril and 103 mg of valsartan. The tablet inactive ingredients are microcrystalline cellulose, low-substituted hydroxypropylcellulose, crospovidone, mannitol, magnesium stearate (vegetable origin), talc, and silicon dioxide. The film-coat inactive ingredients are hypromellose, Macrogol and titanium dioxide. The 97 mg of sacubitril and 103 mg of valsartan tablet also contains talc.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-002-24</NDCCode>
    <PackageDescription>2 TRAY in 1 BOX (62135-002-24)  / 10 CUP, UNIT-DOSE in 1 TRAY / 15 mL in 1 CUP, UNIT-DOSE (62135-002-51) </PackageDescription>
    <NDC11Code>62135-0002-24</NDC11Code>
    <ProductNDC>62135-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution, USP contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-002-37</NDCCode>
    <PackageDescription>237 mL in 1 PACKAGE (62135-002-37) </PackageDescription>
    <NDC11Code>62135-0002-37</NDC11Code>
    <ProductNDC>62135-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution, USP contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-002-47</NDCCode>
    <PackageDescription>473 mL in 1 PACKAGE (62135-002-47) </PackageDescription>
    <NDC11Code>62135-0002-47</NDC11Code>
    <ProductNDC>62135-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution, USP contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-002-78</NDCCode>
    <PackageDescription>3785 mL in 1 PACKAGE (62135-002-78) </PackageDescription>
    <NDC11Code>62135-0002-78</NDC11Code>
    <ProductNDC>62135-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution, USP contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-002-94</NDCCode>
    <PackageDescription>946 mL in 1 PACKAGE (62135-002-94) </PackageDescription>
    <NDC11Code>62135-0002-94</NDC11Code>
    <ProductNDC>62135-002</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240319</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of Lactulose Solution, USP contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-003-37</NDCCode>
    <PackageDescription>237 mL in 1 BOTTLE, PLASTIC (62135-003-37) </PackageDescription>
    <NDC11Code>62135-0003-37</NDC11Code>
    <ProductNDC>62135-003</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactulose</ProprietaryName>
    <NonProprietaryName>Lactulose</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20181123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209517</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>LACTULOSE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>g/15mL</StrengthUnit>
    <Pharm_Classes>Acidifying Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210110</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>For the treatment of constipation. In patients with a history of chronic constipation, lactulose solution therapy increases the number of bowel movements per day and the number of days on which bowel movements occur.</IndicationAndUsage>
    <Description>Lactulose is a synthetic disaccharide in solution form for oral administration. Each 15 mL of lactulose solution contains: 10 g lactulose (and less than 1.6 g galactose, less than 1.2 g lactose, and 1.2 g or less of other sugars). Also contains water. The pH range is 2.5 to 6.5. Lactulose is a colonic acidifier which promotes laxation. The chemical name for lactulose is 4-O-β-D-galactopyranosyl-D-fructofuranose. The molecular formula is C 12H 22O 11. It has the following structural formula:. The molecular weight is 342.30. It is freely soluble in water.</Description>
  </NDC>
</NDCList>