RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>62135-822-84</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (62135-822-84)  / 5 AMPULE in 1 POUCH / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>62135-0822-84</NDC11Code>
    <ProductNDC>62135-822</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20131001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078202</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C 25H 34O 6and its molecular weight is 430.5. Its structural formula is:. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water, sparingly soluble in ethanol, and freely soluble in methylene chloride. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients citric acid, edetate disodium dihydrate, polysorbate 80, sodium chloride, sodium citrate, and water for injection. Two dose strengths are available in single-dose ampules: 0.25 mg and 0.5 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitroconditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration(2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>68462-849-29</NDCCode>
    <PackageDescription>3 CARTON in 1 BOX (68462-849-29)  / 1 BLISTER PACK in 1 CARTON (68462-849-84)  / 1 KIT in 1 BLISTER PACK *  24 CAPSULE, LIQUID FILLED in 1 BLISTER PACK (68462-821-40)  *  4 CAPSULE, LIQUID FILLED in 1 BLISTER PACK (68462-822-40) </PackageDescription>
    <NDC11Code>68462-0849-29</NDC11Code>
    <ProductNDC>68462-849</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Norethindrone Acetate And Ethinyl Estradiol And Ferrous Fumarate</ProprietaryName>
    <NonProprietaryName>Norethindrone Acetate And Ethinyl Estradiol And Ferrous Fumarate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20220727</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213418</ApplicationNumber>
    <LabelerName>Glenmark Pharmaceuticals Inc., USA</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220727</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Norethindrone acetate and ethinyl estradiol capsules and ferrous fumarate capsules are indicated for use by females of reproductive age to prevent pregnancy [see Clinical Studies (14)]. The efficacy of norethindrone acetate and ethinyl estradiol capsules and ferrous fumarate capsules in women with a body mass index (BMI) of more than 35 kg/m2 has not been evaluated.</IndicationAndUsage>
    <Description>Norethindrone Acetate and Ethinyl Estradiol Capsules and Ferrous Fumarate Capsules contain norethindrone acetate, USP a progestin, and ethinyl estradiol, USP an estrogen. Norethindrone Acetate and Ethinyl Estradiol Capsules and Ferrous Fumarate Capsules provides an oral contraceptive regimen consisting of 24 pink active soft gelatin capsules that contain the active ingredients, followed by 4 maroon non-hormonal placebo soft gelatin capsules as specified below: : 1 24 oval, opaque, pale pink soft gelatin capsules each containing 1 mg norethindrone acetate, USP and 20 mcg ethinyl estradiol, USP. , 2 4 oval, opaque, maroon, capsules each containing 75 mg ferrous fumarate, USP. .</Description>
  </NDC>
  <NDC>
    <NDCCode>68982-822-04</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-822-04)  / 100 mL in 1 BOTTLE, GLASS (68982-822-84) </PackageDescription>
    <NDC11Code>68982-0822-04</NDC11Code>
    <ProductNDC>68982-822</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Panzyga</ProprietaryName>
    <NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20181112</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125587</ApplicationNumber>
    <LabelerName>Octapharma USA Inc</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20181112</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-823-84</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (62135-823-84)  / 5 AMPULE in 1 POUCH / 2 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>62135-0823-84</NDC11Code>
    <ProductNDC>62135-823</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Budesonide</ProprietaryName>
    <NonProprietaryName>Budesonide</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20131001</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078202</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>BUDESONIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Budesonide, the active component of budesonide inhalation suspension, is a corticosteroid designated chemically as (RS)-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is provided as a mixture of two epimers (22R and 22S). The empirical formula of budesonide is C 25H 34O 6and its molecular weight is 430.5. Its structural formula is:. Budesonide is a white or almost white, crystalline powder that is practically insoluble in water, sparingly soluble in ethanol, and freely soluble in methylene chloride. Budesonide inhalation suspension is a sterile suspension for inhalation via jet nebulizer and contains the active ingredient budesonide (micronized), and the inactive ingredients citric acid, edetate disodium dihydrate, polysorbate 80, sodium chloride, sodium citrate, and water for injection. Two dose strengths are available in single-dose ampules: 0.25 mg and 0.5 mg per 2 mL ampule. For budesonide inhalation suspension, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Jet Plus Nebulizer/Pari Master compressor system, under in vitroconditions, the mean delivered dose at the mouthpiece (% nominal dose) was approximately 17% at a mean flow rate of 5.5 L/min. The mean nebulization time was 5 minutes or less. Budesonide inhalation suspension should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces [see Dosage and Administration(2)].</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-826-84</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (62135-826-84)  / 1 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>62135-0826-84</NDC11Code>
    <ProductNDC>62135-826</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20100331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076355</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>.63</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).</IndicationAndUsage>
    <Description>Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α'-diol sulfate (2:1) (salt), and its established chemical structure is as follows:. The molecular weight of albuterol sulfate is 576.7 and the empirical formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit-dose vials. Each unit-dose vial contains either 0.75 mg of albuterol sulfate (equivalent to 0.021% or 0.63 mg of albuterol) or 1.5 mg of albuterol sulfate (equivalent to 0.042% or 1.25 mg of albuterol) with sodium chloride and sulfuric acid in a 3 mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to between 3 and 5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB compressor, under in vitroconditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (0.042% or 1.25 mg strength) and 39% of albuterol (0.021% or 0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-827-84</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (62135-827-84)  / 1 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>62135-0827-84</NDC11Code>
    <ProductNDC>62135-827</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20040628</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076355</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>1.25</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 to 12 years of age with asthma (reversible obstructive airway disease).</IndicationAndUsage>
    <Description>Albuterol sulfate inhalation solution is a sterile, clear, colorless solution of the sulfate salt of racemic albuterol, albuterol sulfate. Albuterol sulfate is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGY). The chemical name for albuterol sulfate is α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α'-diol sulfate (2:1) (salt), and its established chemical structure is as follows:. The molecular weight of albuterol sulfate is 576.7 and the empirical formula is (C 13H 21NO 3) 2 H 2SO 4. Albuterol sulfate is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol is salbutamol. Albuterol sulfate inhalation solution is supplied in two strengths in unit-dose vials. Each unit-dose vial contains either 0.75 mg of albuterol sulfate (equivalent to 0.021% or 0.63 mg of albuterol) or 1.5 mg of albuterol sulfate (equivalent to 0.042% or 1.25 mg of albuterol) with sodium chloride and sulfuric acid in a 3 mL isotonic, sterile, aqueous solution. Sodium chloride is added to adjust isotonicity of the solution and sulfuric acid is added to adjust pH of the solution to between 3 and 5 (see HOW SUPPLIED). Albuterol sulfate inhalation solution does not require dilution prior to administration by nebulization. For albuterol sulfate inhalation solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari LC Plus nebulizer (with face mask or mouthpiece) connected to a Pari PRONEB compressor, under in vitroconditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 43% of albuterol (0.042% or 1.25 mg strength) and 39% of albuterol (0.021% or 0.63 mg strength) at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Albuterol sulfate inhalation solution should be administered from a jet nebulizer at an adequate flow rate, via a mouthpiece or face mask (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-828-84</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (62135-828-84)  / 5 VIAL in 1 POUCH / 3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>62135-0828-84</NDC11Code>
    <ProductNDC>62135-828</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>19970917</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074880</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240118</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 2 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
    <Description>Albuterol sulfate inhalation solution is a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate, the racemic form of albuterol, has the chemical name α 1-[( tert-Butylamino)methyl]-4-hydroxy- m-xylene-α,α′-diol sulfate (2:1) (salt) and the following structural formula:. Albuterol sulfate has a molecular weight of 576.7, and the molecular formula is (C 13H 21NO 3) 2H 2SO 4. Albuterol sulfate is a white or practically white powder, freely soluble in water and slightly soluble in alcohol. The World Health Organization’s recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution 0.083% requires no dilution before administration. Each mL of albuterol sulfate inhalation solution (0.083%) contains 0.83 mg of albuterol (as 1 mg of albuterol sulfate) in an isotonic, sterile, aqueous solution containing sodium chloride; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol sulfate inhalation solution (0.083%) contains no sulfiting agents. Albuterol sulfate inhalation solution is a clear, colorless solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-829-84</NDCCode>
    <PackageDescription>30 POUCH in 1 CARTON (62135-829-84)  / 1 VIAL, SINGLE-DOSE in 1 POUCH / .5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>62135-0829-84</NDC11Code>
    <ProductNDC>62135-829</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20010626</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075664</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC.</LabelerName>
    <SubstanceName>ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Albuterol sulfate inhalation solution is indicated for the relief of bronchospasm in patients 12 years of age and older with reversible obstructive airway disease and acute attacks of bronchospasm.</IndicationAndUsage>
    <Description>Albuterol Sulfate Inhalation Solution, 0.5% contains albuterol sulfate, USP, the racemic form of albuterol and a relatively selective beta 2-adrenergic bronchodilator (see CLINICAL PHARMACOLOGYsection below). Albuterol sulfate has the chemical name α 1-[( tert-Butylamino) methyl]-4-hydroxy- m-xylene-α,α′-diol sulfate (2:1) (salt) and the following chemical structure:. (C 13H 21NO 3) 2 H 2SO 4. Mol. Wt. 576.7. Albuterol sulfate is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol base is salbutamol. Albuterol sulfate inhalation solution, 0.5%, is in concentrated form.  Dilute 0.5 mL of the solution to 3 mL with sterile normal saline solution prior to administration by nebulization (see DOSAGE AND ADMINISTRATION). Each 0.5 mL Unit-of-Use Vial Contains:ACTIVE: 2.5 mg of albuterol (equivalent to 3 mg of albuterol sulfate, USP) in a sterile, aqueous solution; sulfuric acid is used to adjust the pH to between 3 and 5. Albuterol sulfate inhalation solution contains no sulfiting agents or preservatives.  It is supplied in 0.5 mL sterile Unit-of-Use Vials. Albuterol sulfate inhalation solution is a clear, colorless to light yellow solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-830-84</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (62135-830-84)  / 5 VIAL in 1 POUCH / 2.5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>62135-0830-84</NDC11Code>
    <ProductNDC>62135-830</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ipratropium Bromide</ProprietaryName>
    <NonProprietaryName>Ipratropium Bromide</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20010927</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075562</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>IPRATROPIUM BROMIDE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/2.5mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ipratropium bromide inhalation solution administered either alone or with other bronchodilators, especially beta adrenergics, is indicated as a bronchodilator for maintenance treatment of bronchospasm associated with chronic obstructive pulmonary disease, including chronic bronchitis and emphysema.</IndicationAndUsage>
    <Description>The active ingredient in ipratropium bromide inhalation solution is ipratropium bromide monohydrate. It is an anticholinergic bronchodilator chemically described as 8-Azoniabicyclo [3.2.1]-octane,-3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate ( endo, syn)-,(±)-; a synthetic quaternary ammonium compound, chemically related to atropine. Ipratropium bromide is a white crystalline substance, freely soluble in water and lower alcohols. It is a quaternary ammonium compound and thus exists in an ionized state in aqueous solutions. It is relatively insoluble in non-polar media. Ipratropium bromide inhalation solution is administered by oral inhalation with the aid of a nebulizer. Each mL contains ipratropium bromide 0.02% (anhydrous basis) in a sterile, preservative-free, isotonic saline solution, pH-adjusted to 3.4 (3 to 4) with hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-831-84</NDCCode>
    <PackageDescription>6 POUCH in 1 CARTON (62135-831-84)  / 5 VIAL, SINGLE-DOSE in 1 POUCH / 3 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>62135-0831-84</NDC11Code>
    <ProductNDC>62135-831</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ipratropium Bromide And Albuterol Sulfate</ProprietaryName>
    <NonProprietaryName>Ipratropium Bromide And Albuterol Sulfate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>RESPIRATORY (INHALATION)</RouteName>
    <StartMarketingDate>20071231</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076749</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>IPRATROPIUM BROMIDE; ALBUTEROL SULFATE</SubstanceName>
    <StrengthNumber>.5; 3</StrengthNumber>
    <StrengthUnit>mg/3mL; mg/3mL</StrengthUnit>
    <Pharm_Classes>Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], beta2-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is indicated for the treatment of bronchospasm associated with COPD in patients requiring more than one bronchodilator.</IndicationAndUsage>
    <Description>The active components in Ipratropium Bromide and Albuterol Sulfate Inhalation Solution are albuterol sulfate and ipratropium bromide. Albuterol sulfate is a salt of racemic albuterol and a relatively selective β 2-adrenergic bronchodilator chemically described as α 1-[( tert-Butylamino) methyl]-4-hydroxy- m-xylene- α,α′-diol sulfate (2:1) (salt). It has a molecular weight of 576.7 and the empirical formula is (C 13H 21NO 3) 2H 2SO 4. It is a white crystalline powder, soluble in water and slightly soluble in ethanol. The World Health Organization’s recommended name for albuterol base is salbutamol. Ipratropium bromide is an anticholinergic bronchodilator chemically described as 8-azoniabicyclo[3.2.1]-octane,3-(3-hydroxy-1-oxo-2-phenylpropoxy)-8-methyl-8-(1-methylethyl)-, bromide, monohydrate (endo,syn)-, (±)-; a synthetic quaternary ammonium compound, chemically related to atropine. It has a molecular weight of 430.4 and the empirical formula is C 20H 30BrNO 3H 2O. It is a white crystalline substance, freely soluble in water and lower alcohols, and insoluble in lipophilic solvents such as ether, chloroform, and fluorocarbons. Each 3 mL vial of Ipratropium Bromide and Albuterol Sulfate Inhalation Solution contains 3 mg (0.1%) of albuterol sulfate (equivalent to 2.5 mg (0.083%) of albuterol base) and 0.5 mg (0.017%) of ipratropium bromide in an isotonic, sterile, aqueous solution containing sodium chloride and hydrochloric acid to adjust to pH 4. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution is a clear, colorless solution. It does not require dilution prior to administration by nebulization. For Ipratropium Bromide and Albuterol Sulfate Inhalation Solution, like all other nebulized treatments, the amount delivered to the lungs will depend on patient factors, the jet nebulizer utilized, and compressor performance. Using the Pari-LC-Plus nebulizer (with face mask or mouthpiece) connected to a PRONEB compressor system, under in vitroconditions, the mean delivered dose from the mouth piece (% nominal dose) was approximately 46% of albuterol and 42% of ipratropium bromide at a mean flow rate of 3.6 L/min. The mean nebulization time was 15 minutes or less. Ipratropium Bromide and Albuterol Sulfate Inhalation Solution should be administered from jet nebulizers at adequate flow rates, via face masks or mouthpieces (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-833-84</NDCCode>
    <PackageDescription>30 VIAL, SINGLE-DOSE in 1 CARTON (62135-833-84)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>62135-0833-84</NDC11Code>
    <ProductNDC>62135-833</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Sterile Water</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA211222</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-02-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240125</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62135-315-30</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (62135-315-30) </PackageDescription>
    <NDC11Code>62135-0315-30</NDC11Code>
    <ProductNDC>62135-315</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065390</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230405</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified. Tuberculosis. Rifampin is indicated in the treatment of all forms of tuberculosis. A three-drug regimen consisting of rifampin, isoniazid, and pyrazinamide is recommended in the initial phase of short-course therapy which is usually continued for 2 months. The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and Centers for Disease Control and Prevention recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin, and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Following the initial phase, treatment should be continued with rifampin and isoniazid for at least 4 months. Treatment should be continued for longer if the patient is still sputum or culture positive, if resistant organisms are present, or if the patient is HIV positive. Rifampin IV is indicated for the initial treatment and retreatment of tuberculosis when the drug cannot be taken by mouth. Meningococcal Carriers. Rifampin is indicated for the treatment of asymptomatic carriers of Neisseria meningitidis to eliminate meningococci from the nasopharynx. Rifampin is not indicated for the treatment of meningococcal infection because of the possibility of the rapid emergence of resistant organisms. (See WARNINGS.). Rifampin should not be used indiscriminately, and, therefore, diagnostic laboratory procedures, including serotyping and susceptibility testing, should be performed for establishment of the carrier state and the correct treatment. So that the usefulness of rifampin in the treatment of asymptomatic meningococcal carriers is preserved, the drug should be used only when the risk of meningococcal disease is high. To reduce the development of drug-resistant bacteria and maintain the effectiveness of rifampin and other antibacterial drugs, rifampin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Rifampin Capsules, USP for oral administration contains 150 mg or 300 mg rifampin, USP per capsule. The 150 mg and 300 mg capsules also contain, as inactive ingredients: pregelatinized starch, colloidal silicon dioxide, talc, magnesium stearate, gelatin, titanium dioxide, D&amp;C Red #28, FD&amp;C Blue #1, and FD&amp;C Red #40.  The capsules are printed with ink containing shellac, black iron oxide, n-butyl alcohol, propylene glycol, FD&amp;C Blue #2 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, D&amp;C Yellow #10 Aluminum Lake, and FD&amp;C Blue #1 Aluminum Lake. Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C 43H 58N 4O 12. The chemical name for rifampin is either:. 3-[[(4-Methyl-1-piperazinyl)imino]methyl]rifamycin. or. 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22– heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13]trienimino)naphtho[2,1- b]furan-1,11(2H)-dione 21-acetate. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-316-60</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (62135-316-60) </PackageDescription>
    <NDC11Code>62135-0316-60</NDC11Code>
    <ProductNDC>62135-316</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20080420</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065390</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230405</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified. Tuberculosis. Rifampin is indicated in the treatment of all forms of tuberculosis. A three-drug regimen consisting of rifampin, isoniazid, and pyrazinamide is recommended in the initial phase of short-course therapy which is usually continued for 2 months. The Advisory Council for the Elimination of Tuberculosis, the American Thoracic Society, and Centers for Disease Control and Prevention recommend that either streptomycin or ethambutol be added as a fourth drug in a regimen containing isoniazid (INH), rifampin, and pyrazinamide for initial treatment of tuberculosis unless the likelihood of INH resistance is very low. The need for a fourth drug should be reassessed when the results of susceptibility testing are known. If community rates of INH resistance are currently less than 4%, an initial treatment regimen with less than four drugs may be considered. Following the initial phase, treatment should be continued with rifampin and isoniazid for at least 4 months. Treatment should be continued for longer if the patient is still sputum or culture positive, if resistant organisms are present, or if the patient is HIV positive. Rifampin IV is indicated for the initial treatment and retreatment of tuberculosis when the drug cannot be taken by mouth. Meningococcal Carriers. Rifampin is indicated for the treatment of asymptomatic carriers of Neisseria meningitidis to eliminate meningococci from the nasopharynx. Rifampin is not indicated for the treatment of meningococcal infection because of the possibility of the rapid emergence of resistant organisms. (See WARNINGS.). Rifampin should not be used indiscriminately, and, therefore, diagnostic laboratory procedures, including serotyping and susceptibility testing, should be performed for establishment of the carrier state and the correct treatment. So that the usefulness of rifampin in the treatment of asymptomatic meningococcal carriers is preserved, the drug should be used only when the risk of meningococcal disease is high. To reduce the development of drug-resistant bacteria and maintain the effectiveness of rifampin and other antibacterial drugs, rifampin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Rifampin Capsules, USP for oral administration contains 150 mg or 300 mg rifampin, USP per capsule. The 150 mg and 300 mg capsules also contain, as inactive ingredients: pregelatinized starch, colloidal silicon dioxide, talc, magnesium stearate, gelatin, titanium dioxide, D&amp;C Red #28, FD&amp;C Blue #1, and FD&amp;C Red #40.  The capsules are printed with ink containing shellac, black iron oxide, n-butyl alcohol, propylene glycol, FD&amp;C Blue #2 Aluminum Lake, FD&amp;C Red #40 Aluminum Lake, D&amp;C Yellow #10 Aluminum Lake, and FD&amp;C Blue #1 Aluminum Lake. Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C 43H 58N 4O 12. The chemical name for rifampin is either:. 3-[[(4-Methyl-1-piperazinyl)imino]methyl]rifamycin. or. 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22– heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13]trienimino)naphtho[2,1- b]furan-1,11(2H)-dione 21-acetate. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-484-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (62135-484-60) </PackageDescription>
    <NDC11Code>62135-0484-60</NDC11Code>
    <ProductNDC>62135-484</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quinapril</ProprietaryName>
    <NonProprietaryName>Quinapril</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050302</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076803</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypertension Quinapril tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
    <Description>Quinapril hydrochloride, USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C 25H 30N 2O 5HCI and its structural formula is:. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets, USP contain quinapril hydrochloride, USP equivalent to 5 mg (equivalent to 5.42 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.84 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.66 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.33 mg Quinapril Hydrochloride) of quinapril for oral administration. Each tablet also contains magnesium carbonate, hydroxypropyl cellulose, crospovidone, magnesium stearate, polyethylene glycol, talc, FD&amp;C yellow No. 6, FD&amp;C red No. 40, titanium dioxide, FD&amp;C blue No. 1, and polyvinyl alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-485-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62135-485-90) </PackageDescription>
    <NDC11Code>62135-0485-90</NDC11Code>
    <ProductNDC>62135-485</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quinapril</ProprietaryName>
    <NonProprietaryName>Quinapril</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050302</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076803</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypertension Quinapril tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
    <Description>Quinapril hydrochloride, USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C 25H 30N 2O 5HCI and its structural formula is:. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets, USP contain quinapril hydrochloride, USP equivalent to 5 mg (equivalent to 5.42 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.84 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.66 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.33 mg Quinapril Hydrochloride) of quinapril for oral administration. Each tablet also contains magnesium carbonate, hydroxypropyl cellulose, crospovidone, magnesium stearate, polyethylene glycol, talc, FD&amp;C yellow No. 6, FD&amp;C red No. 40, titanium dioxide, FD&amp;C blue No. 1, and polyvinyl alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-486-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62135-486-90) </PackageDescription>
    <NDC11Code>62135-0486-90</NDC11Code>
    <ProductNDC>62135-486</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quinapril</ProprietaryName>
    <NonProprietaryName>Quinapril</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050302</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076803</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypertension Quinapril tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
    <Description>Quinapril hydrochloride, USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C 25H 30N 2O 5HCI and its structural formula is:. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets, USP contain quinapril hydrochloride, USP equivalent to 5 mg (equivalent to 5.42 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.84 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.66 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.33 mg Quinapril Hydrochloride) of quinapril for oral administration. Each tablet also contains magnesium carbonate, hydroxypropyl cellulose, crospovidone, magnesium stearate, polyethylene glycol, talc, FD&amp;C yellow No. 6, FD&amp;C red No. 40, titanium dioxide, FD&amp;C blue No. 1, and polyvinyl alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-487-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62135-487-90) </PackageDescription>
    <NDC11Code>62135-0487-90</NDC11Code>
    <ProductNDC>62135-487</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quinapril</ProprietaryName>
    <NonProprietaryName>Quinapril</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20050302</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076803</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC], Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Hypertension Quinapril tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with quinapril tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Quinapril tablets may be used alone or in combination with thiazide diuretics. Heart Failure. Quinapril tablets are indicated in the management of heart failure as adjunctive therapy when added to conventional therapy including diuretics and/or digitalis. In using quinapril tablets, consideration should be given to the fact that another ACE inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients: Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
    <Description>Quinapril hydrochloride, USP is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)],3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3-isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C 25H 30N 2O 5HCI and its structural formula is:. Quinapril hydrochloride is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril Tablets, USP contain quinapril hydrochloride, USP equivalent to 5 mg (equivalent to 5.42 mg Quinapril Hydrochloride), 10 mg (equivalent to 10.84 mg Quinapril Hydrochloride), 20 mg (equivalent to 21.66 mg Quinapril Hydrochloride), or 40 mg (equivalent to 43.33 mg Quinapril Hydrochloride) of quinapril for oral administration. Each tablet also contains magnesium carbonate, hydroxypropyl cellulose, crospovidone, magnesium stearate, polyethylene glycol, talc, FD&amp;C yellow No. 6, FD&amp;C red No. 40, titanium dioxide, FD&amp;C blue No. 1, and polyvinyl alcohol.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-528-09</NDCCode>
    <PackageDescription>210 mL in 1 BOTTLE (62135-528-09) </PackageDescription>
    <NDC11Code>62135-0528-09</NDC11Code>
    <ProductNDC>62135-528</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atovaquone</ProprietaryName>
    <NonProprietaryName>Atovaquone</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207833</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>ATOVAQUONE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antiprotozoal [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230718</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jiroveciipneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprimsulfamethoxazole (TMP-SMX). ( 1.1) , 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. ( 1.2) .</IndicationAndUsage>
    <Description>Atovaquone Oral Suspension, USP is a quinone antimicrobial drug. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. Atovaquone Oral Suspension, USP is a formulation of micro-fine particles of atovaquone. Each 5 mL of atovaquone oral suspension contains 750 mg of atovaquone and the inactive ingredients benzyl alcohol, fruity flavor, poloxamer 188, purified water, saccharin sodium, and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-528-24</NDCCode>
    <PackageDescription>2 TRAY in 1 BOX (62135-528-24)  / 10 CUP in 1 TRAY / 5 mL in 1 CUP (62135-528-45) </PackageDescription>
    <NDC11Code>62135-0528-24</NDC11Code>
    <ProductNDC>62135-528</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atovaquone</ProprietaryName>
    <NonProprietaryName>Atovaquone</NonProprietaryName>
    <DosageFormName>SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207833</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>ATOVAQUONE</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Antimalarial [EPC], Antiprotozoal [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atovaquone oral suspension is a quinone antimicrobial drug indicated for: 1 Prevention of Pneumocystis jiroveciipneumonia (PCP) in adults and adolescents aged 13 years and older who cannot tolerate trimethoprimsulfamethoxazole (TMP-SMX). ( 1.1) , 2 Treatment of mild-to-moderate PCP in adults and adolescents aged 13 years and older who cannot tolerate TMP-SMX. ( 1.2) .</IndicationAndUsage>
    <Description>Atovaquone Oral Suspension, USP is a quinone antimicrobial drug. The chemical name of atovaquone is trans-2-[4-(4-chlorophenyl)cyclohexyl]-3-hydroxy-1,4-naphthalenedione. Atovaquone is a yellow crystalline solid that is practically insoluble in water. It has a molecular weight of 366.84 and the molecular formula C 22H 19ClO 3. The compound has the following structural formula:. Atovaquone Oral Suspension, USP is a formulation of micro-fine particles of atovaquone. Each 5 mL of atovaquone oral suspension contains 750 mg of atovaquone and the inactive ingredients benzyl alcohol, fruity flavor, poloxamer 188, purified water, saccharin sodium, and xanthan gum.</Description>
  </NDC>
  <NDC>
    <NDCCode>0068-0597-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (0068-0597-01)  / 10 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00068-0597-01</NDC11Code>
    <ProductNDC>0068-0597</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifadin Iv</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19890525</StartMarketingDate>
    <EndMarketingDate>20260930</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050627</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>19890525</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>RIFADIN (rifampin capsules USP) for oral administration contains 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain, as inactive ingredients: corn starch, D&amp;C Red No. 28, FD&amp;C Blue No. 1, FD&amp;C Red No. 40, gelatin, magnesium stearate, and titanium dioxide. RIFADIN IV (rifampin for injection USP) contains rifampin 600 mg, sodium formaldehyde sulfoxylate 10 mg, and sodium hydroxide to adjust pH. Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either. 3-[[(4-Methyl-1-piperazinyl)imino]methyl]rifamycin. or. 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18,20,22–heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca [1,11,13]trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>0068-0599-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (0068-0599-01)  / 10 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00068-0599-01</NDC11Code>
    <ProductNDC>0068-0599</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifadin Iv Novaplus</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170201</StartMarketingDate>
    <EndMarketingDate>20251031</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050627</ApplicationNumber>
    <LabelerName>Sanofi-Aventis U.S. LLC</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20170201</StartMarketingDatePackage>
    <EndMarketingDatePackage>20251031</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to rifampin and they should be repeated throughout therapy to monitor the response to treatment. Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to rifampin and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>RIFADIN (rifampin capsules USP) for oral administration contains 150 mg or 300 mg rifampin per capsule. The 150 mg and 300 mg capsules also contain, as inactive ingredients: corn starch, D&amp;C Red No. 28, FD&amp;C Blue No. 1, FD&amp;C Red No. 40, gelatin, magnesium stearate, and titanium dioxide. RIFADIN IV (rifampin for injection USP) contains rifampin 600 mg, sodium formaldehyde sulfoxylate 10 mg, and sodium hydroxide to adjust pH. Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either. 3-[[(4-Methyl-1-piperazinyl)imino]methyl]rifamycin. or. 5,6,9,17,19,21-Hexahydroxy-23-methoxy-2,4,12,16,18,20,22–heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca[1,11,13]trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3428-10</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3428-10)  / 100 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3428-10</NDC11Code>
    <ProductNDC>0093-3428</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3428-30</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3428-30)  / 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3428-30</NDC11Code>
    <ProductNDC>0093-3428</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3428-92</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3428-92)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3428-92</NDC11Code>
    <ProductNDC>0093-3428</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3429-10</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3429-10)  / 100 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3429-10</NDC11Code>
    <ProductNDC>0093-3429</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3429-30</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3429-30)  / 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3429-30</NDC11Code>
    <ProductNDC>0093-3429</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0093-3429-92</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0093-3429-92)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>00093-3429-92</NDC11Code>
    <ProductNDC>0093-3429</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20220909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>Teva Pharmaceuticals USA, Inc.</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-06-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9230-01</NDCCode>
    <PackageDescription>1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (0143-9230-01) </PackageDescription>
    <NDC11Code>00143-9230-01</NDC11Code>
    <ProductNDC>0143-9230</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Rifampin</ProprietaryName>
    <NonProprietaryName>Rifampin</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20160303</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205039</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>RIFAMPIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Rifamycin Antibacterial [EPC], Rifamycins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20160303</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In the treatment of both tuberculosis and the meningococcal carrier state, the small number of resistant cells present within large populations of susceptible cells can rapidly become the predominant type. Bacteriologic cultures should be obtained before the start of therapy to confirm the susceptibility of the organism to Rifampin for Injection, USP and they should be repeated throughout therapy to monitor the response to treatment.  Since resistance can emerge rapidly, susceptibility tests should be performed in the event of persistent positive cultures during the course of treatment. If test results show resistance to Rifampin for Injection, USP and the patient is not responding to therapy, the drug regimen should be modified.</IndicationAndUsage>
    <Description>Rifampin for Injection, USP contains rifampin 600 mg, sodium formaldehyde sulfoxylate 10 mg, and sodium hydroxide to adjust pH. Rifampin is a semisynthetic antibiotic derivative of rifamycin SV. Rifampin is a red-brown crystalline powder very slightly soluble in water at neutral pH, freely soluble in chloroform, soluble in ethyl acetate and in methanol. Its molecular weight is 822.95 and its chemical formula is C43H58N4O12. The chemical name for rifampin is either:. 3-[[(4-Methyl-1-piperazinyl)imino]methyl]rifamycin. or. 5,6,9,17,19,21-hexahydroxy-23-methoxy-2,4,12,16,18, 20,22– heptamethyl-8-[N-(4-methyl-1-piperazinyl)formimidoyl]-2,7-(epoxypentadeca [1,11,13]trienimino)naphtho[2,1-b]furan-1,11(2H)-dione 21-acetate. Its structural formula is.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0416-30</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0168-0416-30)  / 30 g in 1 TUBE</PackageDescription>
    <NDC11Code>00168-0416-30</NDC11Code>
    <ProductNDC>0168-0416</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20140909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
  <NDC>
    <NDCCode>0168-0416-60</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0168-0416-60)  / 60 g in 1 TUBE</PackageDescription>
    <NDC11Code>00168-0416-60</NDC11Code>
    <ProductNDC>0168-0416</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tacrolimus</ProprietaryName>
    <NonProprietaryName>Tacrolimus</NonProprietaryName>
    <DosageFormName>OINTMENT</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20140909</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA200744</ApplicationNumber>
    <LabelerName>E. Fougera &amp; Co. a division of Fougera Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>TACROLIMUS</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Pharm_Classes>Calcineurin Inhibitor Immunosuppressant [EPC], Calcineurin Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20140909</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tacrolimus ointment, both 0.03% and 0.1% for adults, and only 0.03% for children aged 2 to 15 years, is indicated as second-line therapy for the short-term and non-continuous chronic treatment of moderate to severe atopic dermatitis in non-immunocompromised adults and children who have failed to respond adequately to other topical prescription treatments for atopic dermatitis, or when those treatments are not advisable. Tacrolimus ointment is not indicated for children younger than 2 years of age (see boxed WARNING, WARNINGS and PRECAUTIONS: Pediatric Use).</IndicationAndUsage>
    <Description>Tacrolimus ointment contains tacrolimus, a macrolide immunosuppressant produced by Streptomyces tsukubaensis. It is for topical dermatologic use only. Chemically, tacrolimus is designated as [3S-[3R*[E(1S*,3S*,4S*)],4S*,5R*,8S*,9E,12R*,14R*,15S*,16R*,18S*,19S*,26aR*]]-5,6,8,11,12,13,14,15,16,17,18,19,24,25,26,26a-hexadecahydro-5,19-dihydroxy-3-[2-(4-hydroxy-3-methoxycyclohexyl)-1-methylethenyl]-14,16-dimethoxy-4,10,12,18-tetramethyl-8-(2-propenyl)-15,19-epoxy-3H-pyrido[2,1-c][1,4]oxaazacyclotricosine-1,7,20,21(4H,23H)-tetrone, monohydrate. It has the following structural formula:. Tacrolimus has a molecular formula of C44H69NO12 H2O and a formula weight of 822.03. Each gram of tacrolimus ointment contains (w/w) either 0.03% or 0.1% of tacrolimus in a base of mineral oil, paraffin, propylene carbonate, white petrolatum and white wax.</Description>
  </NDC>
</NDCList>