{
"NDC": [
{
"NDCCode": "62175-490-64",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (62175-490-64) > 115 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "62175-0490-64",
"ProductNDC": "62175-490",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Polistirex And Chlorpheniramine Polistirex Pennkinetic",
"NonProprietaryName": "Hydrocodone Polistirex And Chlorpheniramine Polistirex",
"DosageFormName": "SUSPENSION, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19871231",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA019111",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "HYDROCODONE; CHLORPHENIRAMINE",
"StrengthNumber": "10; 8",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Opioid Agonist [EPC],Opioid Agonists [MoA],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "10019-651-64",
"PackageDescription": "6 BOTTLE in 1 CARTON (10019-651-64) / 250 mL in 1 BOTTLE",
"NDC11Code": "10019-0651-64",
"ProductNDC": "10019-651",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevoflurane",
"NonProprietaryName": "Sevoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20020702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075895",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "SEVOFLURANE",
"StrengthNumber": "250",
"StrengthUnit": "mL/250mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020702",
"SamplePackage": "N",
"IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
"Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
},
{
"NDCCode": "10019-653-64",
"PackageDescription": "6 BOTTLE in 1 CARTON (10019-653-64) / 250 mL in 1 BOTTLE",
"NDC11Code": "10019-0653-64",
"ProductNDC": "10019-653",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sevoflurane",
"NonProprietaryName": "Sevoflurane",
"DosageFormName": "LIQUID",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20020707",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075895",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SEVOFLURANE",
"StrengthNumber": "250",
"StrengthUnit": "mL/250mL",
"Pharm_Classes": "General Anesthesia [PE], General Anesthetic [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20020707",
"SamplePackage": "N",
"IndicationAndUsage": "Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.",
"Description": "Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels."
},
{
"NDCCode": "72603-490-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (72603-490-01) ",
"NDC11Code": "72603-0490-01",
"ProductNDC": "72603-490",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "72603-490-02",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (72603-490-02) ",
"NDC11Code": "72603-0490-02",
"ProductNDC": "72603-490",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "72603-490-03",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (72603-490-03) ",
"NDC11Code": "72603-0490-03",
"ProductNDC": "72603-490",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluoxetine",
"NonProprietaryName": "Fluoxetine",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20250901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078619",
"LabelerName": "NorthStar Rx LLC",
"SubstanceName": "FLUOXETINE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250901",
"SamplePackage": "N",
"IndicationAndUsage": "Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.",
"Description": "Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "62175-106-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (62175-106-01) ",
"NDC11Code": "62175-0106-01",
"ProductNDC": "62175-106",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930630",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020215",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2022-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19930630",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Tablets are indicated for the prevention and treatment of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The empirical formula is C6H9NO6 and the molecular weight is 191.14. The chemical name for isosorbide mononitrate is 1,4:3,6-Dianhydro-D-glucitol 5-nitrate and the compound has the following structural formula. Isosorbide Mononitrate Tablets, USP are available as 10 mg and 20 mg tablets. Each tablet also contains as inactive ingredients: lactose, talc, colloidal silicon dioxide, starch, microcrystalline cellulose and aluminum stearate."
},
{
"NDCCode": "62175-107-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (62175-107-01) ",
"NDC11Code": "62175-0107-01",
"ProductNDC": "62175-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930630",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020215",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2022-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19930630",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Tablets are indicated for the prevention and treatment of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The empirical formula is C6H9NO6 and the molecular weight is 191.14. The chemical name for isosorbide mononitrate is 1,4:3,6-Dianhydro-D-glucitol 5-nitrate and the compound has the following structural formula. Isosorbide Mononitrate Tablets, USP are available as 10 mg and 20 mg tablets. Each tablet also contains as inactive ingredients: lactose, talc, colloidal silicon dioxide, starch, microcrystalline cellulose and aluminum stearate."
},
{
"NDCCode": "62175-114-32",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-32) ",
"NDC11Code": "62175-0114-32",
"ProductNDC": "62175-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030903",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-114-37",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-37) ",
"NDC11Code": "62175-0114-37",
"ProductNDC": "62175-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030903",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-114-46",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-46) ",
"NDC11Code": "62175-0114-46",
"ProductNDC": "62175-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030903",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-114-49",
"PackageDescription": "72000 CAPSULE, DELAYED RELEASE in 1 DRUM (62175-114-49) ",
"NDC11Code": "62175-0114-49",
"ProductNDC": "62175-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030903",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20030903",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-118-32",
"PackageDescription": "30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-32) ",
"NDC11Code": "62175-0118-32",
"ProductNDC": "62175-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021104",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-118-37",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-37) ",
"NDC11Code": "62175-0118-37",
"ProductNDC": "62175-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021104",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-118-43",
"PackageDescription": "1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-43) ",
"NDC11Code": "62175-0118-43",
"ProductNDC": "62175-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021104",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-118-46",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-46) ",
"NDC11Code": "62175-0118-46",
"ProductNDC": "62175-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021104",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-118-49",
"PackageDescription": "54000 CAPSULE, DELAYED RELEASE in 1 DRUM (62175-118-49) ",
"NDC11Code": "62175-0118-49",
"ProductNDC": "62175-118",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20021104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075410",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20021104",
"SamplePackage": "N",
"IndicationAndUsage": "Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .",
"Description": "The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol."
},
{
"NDCCode": "62175-119-37",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-37) ",
"NDC11Code": "62175-0119-37",
"ProductNDC": "62175-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-119-41",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-41) ",
"NDC11Code": "62175-0119-41",
"ProductNDC": "62175-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-119-43",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-43) ",
"NDC11Code": "62175-0119-43",
"ProductNDC": "62175-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-119-46",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-46) ",
"NDC11Code": "62175-0119-46",
"ProductNDC": "62175-119",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-123-01",
"PackageDescription": "30 FILM, EXTENDED RELEASE in 1 BOX, UNIT-DOSE (62175-123-01)",
"NDC11Code": "62175-0123-01",
"ProductNDC": "62175-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "20.8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-123-11",
"PackageDescription": "100 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-123-11)",
"NDC11Code": "62175-0123-11",
"ProductNDC": "62175-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "20.8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-123-31",
"PackageDescription": "30 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-123-31)",
"NDC11Code": "62175-0123-31",
"ProductNDC": "62175-123",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "20.8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-124-01",
"PackageDescription": "30 FILM, EXTENDED RELEASE in 1 BOX, UNIT-DOSE (62175-124-01)",
"NDC11Code": "62175-0124-01",
"ProductNDC": "62175-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "37.4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-124-11",
"PackageDescription": "100 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-124-11)",
"NDC11Code": "62175-0124-11",
"ProductNDC": "62175-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "37.4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-124-31",
"PackageDescription": "30 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-124-31)",
"NDC11Code": "62175-0124-31",
"ProductNDC": "62175-124",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "FILM, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20040810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075115",
"LabelerName": "Kremers Urban Pharmaceuticals Inc.",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": "37.4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.",
"Description": "Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system."
},
{
"NDCCode": "62175-128-37",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-37) ",
"NDC11Code": "62175-0128-37",
"ProductNDC": "62175-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-128-41",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-41) ",
"NDC11Code": "62175-0128-41",
"ProductNDC": "62175-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
},
{
"NDCCode": "62175-128-43",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-43) ",
"NDC11Code": "62175-0128-43",
"ProductNDC": "62175-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isosorbide Mononitrate",
"NonProprietaryName": "Isosorbide Mononitrate",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981030",
"EndMarketingDate": "20240331",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075155",
"LabelerName": "Lannett Company, Inc.",
"SubstanceName": "ISOSORBIDE MONONITRATE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Deprecated",
"LastUpdate": "2024-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19981030",
"EndMarketingDatePackage": "20240331",
"SamplePackage": "N",
"IndicationAndUsage": "Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.",
"Description": "Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62175-490-64</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (62175-490-64) > 115 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>62175-0490-64</NDC11Code>
<ProductNDC>62175-490</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Polistirex And Chlorpheniramine Polistirex Pennkinetic</ProprietaryName>
<NonProprietaryName>Hydrocodone Polistirex And Chlorpheniramine Polistirex</NonProprietaryName>
<DosageFormName>SUSPENSION, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19871231</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA019111</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>HYDROCODONE; CHLORPHENIRAMINE</SubstanceName>
<StrengthNumber>10; 8</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC],Opioid Agonists [MoA],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>10019-651-64</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (10019-651-64) / 250 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>10019-0651-64</NDC11Code>
<ProductNDC>10019-651</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevoflurane</ProprietaryName>
<NonProprietaryName>Sevoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20020702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075895</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>SEVOFLURANE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mL/250mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
<Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (˃ 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
</NDC>
<NDC>
<NDCCode>10019-653-64</NDCCode>
<PackageDescription>6 BOTTLE in 1 CARTON (10019-653-64) / 250 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>10019-0653-64</NDC11Code>
<ProductNDC>10019-653</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sevoflurane</ProprietaryName>
<NonProprietaryName>Sevoflurane</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20020707</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075895</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SEVOFLURANE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mL/250mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020707</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sevoflurane is indicated for induction and maintenance of general anesthesia in adult and pediatric patients for inpatient and outpatient surgery. Sevoflurane should be administered only by persons trained in the administration of general anesthesia. Facilities for maintenance of a patent airway, artificial ventilation, oxygen enrichment, and circulatory resuscitation must be immediately available. Since level of anesthesia may be altered rapidly, only vaporizers producing predictable concentrations of sevoflurane should be used.</IndicationAndUsage>
<Description>Sevoflurane, USP, volatile liquid for inhalation, a nonflammable and nonexplosive liquid administered by vaporization, is a halogenated general inhalation anesthetic drug. Sevoflurane, USP is fluoromethyl 2,2,2,-trifluoro-1-(trifluoromethyl) ethyl ether and its structural formula is. Sevoflurane, USP is nonflammable and nonexplosive as defined by the requirements of International Electrotechnical Commission 601-2-13. Sevoflurane, USP is a clear, colorless, liquid containing no additives. Sevoflurane, USP is not corrosive to stainless steel, brass, aluminum, nickel-plated brass, chrome-plated brass or copper beryllium. Sevoflurane, USP is nonpungent. It is miscible with ethanol, ether, chloroform, and benzene, and it is slightly soluble in water. Sevoflurane, USP is stable when stored under normal room lighting conditions according to instructions. No discernible degradation of sevoflurane, USP occurs in the presence of strong acids or heat. When in contact with alkaline CO2 absorbents (e.g., Baralyme® and to a lesser extent soda lime) within the anesthesia machine, Sevoflurane, USP can undergo degradation under certain conditions. Degradation of sevoflurane, USP is minimal, and degradants are either undetectable or present in non-toxic amounts when used as directed with fresh absorbents. Sevoflurane, USP degradation and subsequent degradant formation are enhanced by increasing absorbent temperature increased sevoflurane, USP concentration, decreased fresh gas flow and desiccated CO2 absorbents (especially with potassium hydroxide containing absorbents e.g., Baralyme). Sevoflurane, USP alkaline degradation occurs by two pathways. The first results from the loss of hydrogen fluoride with the formation of pentafluoroisopropenyl fluoromethyl ether, (PIFE, C4H2F6O), also known as Compound A, and trace amounts of pentafluoromethoxy isopropyl fluoromethyl ether, (PMFE, C5H6F6O), also known as Compound B. The second pathway for degradation of sevoflurane, USP, which occurs primarily in the presence of desiccated CO2 absorbents, is discussed later. In the first pathway, the defluorination pathway, the production of degradants in the anesthesia circuit results from the extraction of the acidic proton in the presence of a strong base (KOH and/or NaOH) forming an alkene (Compound A) from sevoflurane, USP similar to formation of 2-bromo-2-chloro-1,1-difluoro ethylene (BCDFE) from halothane. Laboratory simulations have shown that the concentration of these degradants is inversely correlated with the fresh gas flow rate (See Figure 1). Since the reaction of carbon dioxide with absorbents is exothermic, the temperature increase will be determined by quantities of CO2 absorbed, which in turn will depend on fresh gas flow in the anesthesia circle system, metabolic status of the patient, and ventilation. The relationship of temperature produced by varying levels of CO2 and Compound A production is illustrated in the following in vitro simulation where CO2 was added to a circle absorber system. Compound A concentration in a circle absorber system increases as a function of increasing CO2 absorbent temperature and composition (Baralyme producing higher levels than soda lime), increased body temperature, and increased minute ventilation, and decreasing fresh gas flow rates. It has been reported that the concentration of Compound A increases significantly with prolonged dehydration of Baralyme. Compound A exposure in patients also has been shown to rise with increased sevoflurane, USP concentrations and duration of anesthesia. In a clinical study in which sevoflurane, USP was administered to patients under low flow conditions for ≥ 2 hours at flow rates of 1 Liter/minute, Compound A levels were measured in an effort to determine the relationship between MAC hours and Compound A levels produced. The relationship between Compound A levels and sevoflurane, USP exposure are shown in Figure 2a. Compound A has been shown to be nephrotoxic in rats after exposures that have varied in duration from one to three hours. No histopathologic change was seen at a concentration of up to 270 ppm for one hour. Sporadic single cell necrosis of proximal tubule cells has been reported at a concentration of 114 ppm after a 3-hour exposure to Compound A in rats. The LC50 reported at 1 hour is 1050-1090 ppm (male-female) and, at 3 hours, 350-490 ppm (male-female). An experiment was performed comparing sevoflurane, USP plus 75 or 100 ppm Compound A with an active control to evaluate the potential nephrotoxicity of Compound A in non-human primates. A single 8-hour exposure of Sevoflurane, USP in the presence of Compound A produced single-cell renal tubular degeneration and single-cell necrosis in cynomolgus monkeys. These changes are consistent with the increased urinary protein, glucose level and enzymic activity noted on days one and three on the clinical pathology evaluation. This nephrotoxicity produced by Compound A is dose and duration of exposure dependent. At a fresh gas flow rate of 1 L/min, mean maximum concentrations of Compound A in the anesthesia circuit in clinical settings are approximately 20 ppm (0.002%) with soda lime and 30 ppm (0.003%) with Baralyme in adult patients; mean maximum concentrations in pediatric patients with soda lime are about half those found in adults. The highest concentration observed in a single patient with Baralyme was 61 ppm (0.0061%) and 32 ppm (0.0032%) with soda lime. The levels of Compound A at which toxicity occurs in humans is not known. The second pathway for degradation of sevoflurane, USP occurs primarily in the presence of desiccated CO2 absorbents and leads to the dissociation of sevoflurane, USP into hexafluoroisopropanol (HFIP) and formaldehyde. HFIP is inactive, non-genotoxic, rapidly glucuronidated and cleared by the liver. Formaldehyde is present during normal metabolic processes. Upon exposure to a highly desiccated absorbent, formaldehyde can further degrade into methanol and formate. Formate can contribute to the formation of carbon monoxide in the presence of high temperature that can be associated with desiccated Baralyme®. Methanol can react with Compound A to form the methoxy addition product Compound B. Compound B can undergo further HF elimination to form Compounds C, D, and E. Sevoflurane, USP degradants were observed in the respiratory circuit of an experimental anesthesia machine using desiccated CO2 absorbents and maximum sevoflurane, USP concentrations (8%) for extended periods of time (> 2 hours). Concentrations of formaldehyde observed with desiccated soda lime in this experimental anesthesia respiratory circuit were consistent with levels that could potentially result in respiratory irritation. Although KOH containing CO2 absorbents are no longer commercially available, in the laboratory experiments, exposure of sevoflurane, USP to the desiccated KOH containing CO2 absorbent, Baralyme, resulted in the detection of substantially greater degradant levels.</Description>
</NDC>
<NDC>
<NDCCode>72603-490-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (72603-490-01) </PackageDescription>
<NDC11Code>72603-0490-01</NDC11Code>
<ProductNDC>72603-490</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>72603-490-02</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (72603-490-02) </PackageDescription>
<NDC11Code>72603-0490-02</NDC11Code>
<ProductNDC>72603-490</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>72603-490-03</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (72603-490-03) </PackageDescription>
<NDC11Code>72603-0490-03</NDC11Code>
<ProductNDC>72603-490</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluoxetine</ProprietaryName>
<NonProprietaryName>Fluoxetine</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078619</ApplicationNumber>
<LabelerName>NorthStar Rx LLC</LabelerName>
<SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluoxetine capsules are indicated for the treatment of. Fluoxetine capsules and Olanzapine in Combination are indicated for the treatment of. Fluoxetine capsules monotherapy is not indicated for the treatment of depressive episodes associated with Bipolar I Disorder or the treatment of treatment resistant depression. When using fluoxetine capsules and olanzapine in combination, also refer to the Clinical Studies section of the package insert for Symbyax®.</IndicationAndUsage>
<Description>Fluoxetine capsules, USP are a selective serotonin reuptake inhibitor for oral administration. It is designated (±)-N-methyl-3-phenyl-3-[(α,α,α-trifluoro-p-tolyl)oxy]propylamine hydrochloride and has the molecular formula of C17H18F3NOHCl. Its molecular weight is 345.79. The structural formula is:. Fluoxetine hydrochloride is a white to off-white crystalline solid with a solubility of 14 mg/mL in water. Each capsule contains fluoxetine hydrochloride equivalent to 10 mg (32.3 μmol), 20 mg (64.7 μmol), or 40 mg (129.3 μmol) of fluoxetine. The capsules also contain the following inactive ingredients: FD&C Blue #1, gelatin, pregelatinized starch (maize), sodium lauryl sulphate, titanium dioxide and yellow iron oxide. In addition 40 mg also contains FD&C Yellow #6. The capsules are printed with edible ink containing black iron oxide, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>62175-106-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (62175-106-01) </PackageDescription>
<NDC11Code>62175-0106-01</NDC11Code>
<ProductNDC>62175-106</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930630</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020215</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Tablets are indicated for the prevention and treatment of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The empirical formula is C6H9NO6 and the molecular weight is 191.14. The chemical name for isosorbide mononitrate is 1,4:3,6-Dianhydro-D-glucitol 5-nitrate and the compound has the following structural formula. Isosorbide Mononitrate Tablets, USP are available as 10 mg and 20 mg tablets. Each tablet also contains as inactive ingredients: lactose, talc, colloidal silicon dioxide, starch, microcrystalline cellulose and aluminum stearate.</Description>
</NDC>
<NDC>
<NDCCode>62175-107-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (62175-107-01) </PackageDescription>
<NDC11Code>62175-0107-01</NDC11Code>
<ProductNDC>62175-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930630</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020215</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19930630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Tablets are indicated for the prevention and treatment of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate, an organic nitrate, is a vasodilator with effects on both arteries and veins. The empirical formula is C6H9NO6 and the molecular weight is 191.14. The chemical name for isosorbide mononitrate is 1,4:3,6-Dianhydro-D-glucitol 5-nitrate and the compound has the following structural formula. Isosorbide Mononitrate Tablets, USP are available as 10 mg and 20 mg tablets. Each tablet also contains as inactive ingredients: lactose, talc, colloidal silicon dioxide, starch, microcrystalline cellulose and aluminum stearate.</Description>
</NDC>
<NDC>
<NDCCode>62175-114-32</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-32) </PackageDescription>
<NDC11Code>62175-0114-32</NDC11Code>
<ProductNDC>62175-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-114-37</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-37) </PackageDescription>
<NDC11Code>62175-0114-37</NDC11Code>
<ProductNDC>62175-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-114-46</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-114-46) </PackageDescription>
<NDC11Code>62175-0114-46</NDC11Code>
<ProductNDC>62175-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-114-49</NDCCode>
<PackageDescription>72000 CAPSULE, DELAYED RELEASE in 1 DRUM (62175-114-49) </PackageDescription>
<NDC11Code>62175-0114-49</NDC11Code>
<ProductNDC>62175-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030903</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030903</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-118-32</NDCCode>
<PackageDescription>30 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-32) </PackageDescription>
<NDC11Code>62175-0118-32</NDC11Code>
<ProductNDC>62175-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-118-37</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-37) </PackageDescription>
<NDC11Code>62175-0118-37</NDC11Code>
<ProductNDC>62175-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-118-43</NDCCode>
<PackageDescription>1000 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-43) </PackageDescription>
<NDC11Code>62175-0118-43</NDC11Code>
<ProductNDC>62175-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-118-46</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (62175-118-46) </PackageDescription>
<NDC11Code>62175-0118-46</NDC11Code>
<ProductNDC>62175-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-118-49</NDCCode>
<PackageDescription>54000 CAPSULE, DELAYED RELEASE in 1 DRUM (62175-118-49) </PackageDescription>
<NDC11Code>62175-0118-49</NDC11Code>
<ProductNDC>62175-118</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075410</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021104</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Omeprazole Delayed-Release Capsules is a proton pump inhibitor (PPI) indicated for the: 1 Treatment of active duodenal ulcer in adults (1.1) , 2 Eradication of Helicobacter pylori to reduce the risk of duodenal ulcer recurrence in adults (1.2) , 3 Treatment of active benign gastric ulcer in adults (1.3) , 4 Treatment of symptomatic gastroesophageal reflux disease (GERD) in patients 1 year of age and older (1.4) , 5 Treatment of erosive esophagitis (EE) due to acid-mediated GERD in patients 1 year of age and older (1.5) , 6 Maintenance of healing of EE due to acid-mediated GERD in patients 1 year of age and older (1.6) , 7 Pathologic hypersecretory conditions in adults (1.7) .</IndicationAndUsage>
<Description>The active ingredient in Omeprazole Delayed-Release Capsules is a substituted benzimidazole, 5-methoxy-2-[[(4-methoxy-3, 5-dimethyl-2-pyridinyl) methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C17H19N3O3S, with a molecular weight of 345.42. The structural formula is. Omeprazole is a white to off-white crystalline powder that melts with decomposition at about 155°C. It is a weak base, freely soluble in ethanol and methanol, and slightly soluble in acetone and isopropanol and very slightly soluble in water. The stability of omeprazole is a function of pH; it is rapidly degraded in acid media, but has acceptable stability under alkaline conditions. Omeprazole Delayed-Release Capsules meet USP Dissolution Test 2. Omeprazole Delayed-Release Capsules is supplied as delayed-release capsules for oral administration. Each delayed-release capsule contains either 10 mg, 20 mg, or 40 mg of omeprazole in the form of enteric-coated microtablets with the following inactive ingredients: crospovidone, glyceryl dibehenate, hypromellose, lactose monohydrate, methacrylic acid copolymer dispersion, silicon dioxide, talc, titanium dioxide and triethyl citrate. In addition, the capsule shells contain gelatin and may contain sodium lauryl sulfate. In addition, the 20 mg and 40 mg capsule shells also contain yellow iron oxide. The imprinting ink also contains ammonium hydroxide, butyl alcohol, black iron oxide, isopropyl alcohol, propylene glycol and shellac glaze. The ink may also contain dehydrated alcohol.</Description>
</NDC>
<NDC>
<NDCCode>62175-119-37</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-37) </PackageDescription>
<NDC11Code>62175-0119-37</NDC11Code>
<ProductNDC>62175-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-119-41</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-41) </PackageDescription>
<NDC11Code>62175-0119-41</NDC11Code>
<ProductNDC>62175-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-119-43</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-43) </PackageDescription>
<NDC11Code>62175-0119-43</NDC11Code>
<ProductNDC>62175-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-119-46</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-119-46) </PackageDescription>
<NDC11Code>62175-0119-46</NDC11Code>
<ProductNDC>62175-119</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-123-01</NDCCode>
<PackageDescription>30 FILM, EXTENDED RELEASE in 1 BOX, UNIT-DOSE (62175-123-01)</PackageDescription>
<NDC11Code>62175-0123-01</NDC11Code>
<ProductNDC>62175-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>20.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-123-11</NDCCode>
<PackageDescription>100 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-123-11)</PackageDescription>
<NDC11Code>62175-0123-11</NDC11Code>
<ProductNDC>62175-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>20.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-123-31</NDCCode>
<PackageDescription>30 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-123-31)</PackageDescription>
<NDC11Code>62175-0123-31</NDC11Code>
<ProductNDC>62175-123</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>20.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-124-01</NDCCode>
<PackageDescription>30 FILM, EXTENDED RELEASE in 1 BOX, UNIT-DOSE (62175-124-01)</PackageDescription>
<NDC11Code>62175-0124-01</NDC11Code>
<ProductNDC>62175-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>37.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-124-11</NDCCode>
<PackageDescription>100 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-124-11)</PackageDescription>
<NDC11Code>62175-0124-11</NDC11Code>
<ProductNDC>62175-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>37.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-124-31</NDCCode>
<PackageDescription>30 FILM, EXTENDED RELEASE in 1 PACKAGE (62175-124-31)</PackageDescription>
<NDC11Code>62175-0124-31</NDC11Code>
<ProductNDC>62175-124</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>FILM, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20040810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075115</ApplicationNumber>
<LabelerName>Kremers Urban Pharmaceuticals Inc.</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>37.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC],Nitrates [CS],Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Transdermal nitroglycerin is indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of transdermal nitroglycerin is not sufficiently rapid for this product to be useful in aborting an acute attack.</IndicationAndUsage>
<Description>Nitroglycerin is 1,2,3-propanetriol trinitrate, an organic nitrate whose structural formula is. and whose molecular weight is 227.09. The organic nitrates are vasodilators, active on both arteries and veins. The Nitroglycerin Transdermal System is a flat unit designed to provide continuous controlled release of nitroglycerin through intact skin. The rate of release of nitroglycerin is linearly dependent upon the area of the applied system; each cm2 of applied system delivers approximately .02 mg of nitroglycerin per hour. Thus, the 10 cm2 and 18 cm2 systems deliver approximately 0.2 and 0.4 mg of nitroglycerin per hour, respectively. Each 10 cm2 and 18 cm2 system contains 20.8 and 37.4 mg of nitroglycerin, respectively. The remainder of the nitroglycerin in each system serves as a reservoir and is not delivered in normal use. After 12 hours, for example, each system has delivered approximately 12% of its original content of nitroglycerin. The Nitroglycerin Transdermal System comprises two layers. Proceeding from the visible surface toward the surface attached to the skin, these layers are 1) polypropylene foil backing layer that is impermeable to nitroglycerin and 2) nitroglycerin in an acrylic-based polymer adhesive with a cross-linking agent to provide a continuous source of active ingredient. Prior to use, a peelable protective liner is removed from the adhesive surface. Each unit is sealed in a paper foil-lined pouch. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>62175-128-37</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-37) </PackageDescription>
<NDC11Code>62175-0128-37</NDC11Code>
<ProductNDC>62175-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-128-41</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-41) </PackageDescription>
<NDC11Code>62175-0128-41</NDC11Code>
<ProductNDC>62175-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
<NDC>
<NDCCode>62175-128-43</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (62175-128-43) </PackageDescription>
<NDC11Code>62175-0128-43</NDC11Code>
<ProductNDC>62175-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isosorbide Mononitrate</ProprietaryName>
<NonProprietaryName>Isosorbide Mononitrate</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981030</StartMarketingDate>
<EndMarketingDate>20240331</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075155</ApplicationNumber>
<LabelerName>Lannett Company, Inc.</LabelerName>
<SubstanceName>ISOSORBIDE MONONITRATE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19981030</StartMarketingDatePackage>
<EndMarketingDatePackage>20240331</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isosorbide Mononitrate Extended-Release Tablets are indicated for the prevention of angina pectoris due to coronary artery disease. The onset of action of oral isosorbide mononitrate is not sufficiently rapid for this product to be useful in aborting an acute anginal episode.</IndicationAndUsage>
<Description>Isosorbide mononitrate (ISMN), an organic nitrate and the major biologically active metabolite of isosorbide dinitrate (ISDN), is a vasodilator with effects on both arteries and veins. Each tablet, for oral administration, contains either 30 mg, 60 mg or 120 mg of isosorbide mononitrate in an extended-release formulation. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose and talc. The molecular formula of ISMN is C6H9NO6 and the molecular weight is 191.14. The chemical name for ISMN is 1,4:3,6-dianhydro-,D-glucitol 5-nitrate; the compound has the following structural formula. ISMN is a white, crystalline, odorless compound which is stable in air and in solution, has a melting point of about 90°C, and an optical rotation of +144° (2% in water, 20°C). Isosorbide mononitrate is freely soluble in water, ethanol, methanol, chloroform, ethyl acetate, and dichloromethane.</Description>
</NDC>
</NDCList>