{
"NDC": [
{
"NDCCode": "62332-082-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (62332-082-30) ",
"NDC11Code": "62332-0082-30",
"ProductNDC": "62332-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "62332-082-10",
"PackageDescription": "100 TABLET, FILM COATED in 1 CARTON (62332-082-10) ",
"NDC11Code": "62332-0082-10",
"ProductNDC": "62332-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "62332-082-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (62332-082-71) ",
"NDC11Code": "62332-0082-71",
"ProductNDC": "62332-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "62332-082-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62332-082-90) ",
"NDC11Code": "62332-0082-90",
"ProductNDC": "62332-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valsartan And Hydrochlorothiazide",
"NonProprietaryName": "Valsartan And Hydrochlorothiazide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160520",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201662",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "VALSARTAN; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "320; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160520",
"SamplePackage": "N",
"IndicationAndUsage": "Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).",
"Description": "Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2."
},
{
"NDCCode": "10544-082-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (10544-082-30)",
"NDC11Code": "10544-0082-30",
"ProductNDC": "10544-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cephalexin",
"NonProprietaryName": "Cephalexin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20120801",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062713",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "CEPHALEXIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Cephalexin capsules are indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, cephalexin capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain anhydrous lactose, gelatin, magnesium stearate, talc and titanium dioxide. The capsules are imprinted with edible ink containing black iron oxide."
},
{
"NDCCode": "13107-082-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (13107-082-30) ",
"NDC11Code": "13107-0082-30",
"ProductNDC": "13107-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Trazodone Hydrochloride",
"NonProprietaryName": "Trazodone Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150915",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204852",
"LabelerName": "Aurolife Pharma LLC",
"SubstanceName": "TRAZODONE HYDROCHLORIDE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150915",
"SamplePackage": "N",
"IndicationAndUsage": "Trazodone Hydrochloride Tablets are indicated for the treatment of major depressive disorder (MDD) in adults.",
"Description": "Trazodone hydrochloride tablets for oral administration contain trazodone hydrochloride, a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1piperazinyl]propyl]-1,2,4-triazolo [4,3-a]pyridin-3(2H)-one hydrochloride. It is a white odorless crystalline powder which is freely soluble in water. The structural formula is represented as follows. Molecular Formula: C19H22CIN5O HCl. Molecular Weight: 408.33. Each tablet, for oral administration, contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (physically modified corn (maize) starch), sodium lauryl sulfate, and sodium starch glycolate."
},
{
"NDCCode": "13537-082-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-082-02) > 30 g in 1 TUBE (13537-082-01)",
"NDC11Code": "13537-0082-02",
"ProductNDC": "13537-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Effet Parfait Mineral Natural Skin Effect Mousse Foundation Spf 16",
"ProprietaryNameSuffix": "Medium 6- Beige",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "PASTE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161102",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": ".065; .024; .015",
"StrengthUnit": "g/g; g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "13811-082-30",
"PackageDescription": "30 mL in 1 BOTTLE (13811-082-30)",
"NDC11Code": "13811-0082-30",
"ProductNDC": "13811-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Trigofen Dm",
"NonProprietaryName": "Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Hydrochloride",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20110401",
"EndMarketingDate": "20140830",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "TRIGEN Laboratories, Inc.",
"SubstanceName": "CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "1; 3; 2",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2014-09-05"
},
{
"NDCCode": "14141-082-02",
"PackageDescription": "1 TUBE in 1 BOX (14141-082-02) > 30 g in 1 TUBE (14141-082-01) ",
"NDC11Code": "14141-0082-02",
"ProductNDC": "14141-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Mousse Matiffiant Matte Finish Mousse Foundation Spf 15",
"ProprietaryNameSuffix": "Claire 4/ Beige",
"NonProprietaryName": "Octinoxate, Titanium Dioxide, And Zinc Oxide",
"DosageFormName": "PASTE",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180808",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Bel Star S.A. (Colombia)",
"SubstanceName": "OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": ".065; .0244; .0157",
"StrengthUnit": "g/g; g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20180808",
"SamplePackage": "N",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "16590-082-30",
"PackageDescription": "30 CAPSULE in 1 BOTTLE, PLASTIC (16590-082-30)",
"NDC11Code": "16590-0082-30",
"ProductNDC": "16590-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19840507",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062396",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Hyclate Capsules, USP and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide."
},
{
"NDCCode": "16714-082-01",
"PackageDescription": "30 TABLET in 1 BOTTLE (16714-082-01)",
"NDC11Code": "16714-0082-01",
"ProductNDC": "16714-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040842",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2015-07-17"
},
{
"NDCCode": "16714-082-07",
"PackageDescription": "30 TABLET in 1 BOTTLE (16714-082-07)",
"NDC11Code": "16714-0082-07",
"ProductNDC": "16714-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040842",
"LabelerName": "Northstar RxLLC",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2015-07-17"
},
{
"NDCCode": "21695-082-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (21695-082-30)",
"NDC11Code": "21695-0082-30",
"ProductNDC": "21695-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mirtazapine",
"NonProprietaryName": "Mirtazapine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20041022",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076921",
"LabelerName": "Rebel Distributors Corp.",
"SubstanceName": "MIRTAZAPINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Mirtazapine tablets are indicated for the treatment of major depressive disorder. The efficacy of mirtazapine in the treatment of major depressive disorder was established in six week controlled trials of outpatients whose diagnoses corresponded most closely to the Diagnostic and Statistical Manual of Mental Disorders-3rd edition (DSM-III) category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The effectiveness of mirtazapine in hospitalized depressed patients has not been adequately studied. The efficacy of mirtazapine in maintaining a response in patients with major depressive disorder for up to 40 weeks following 8 to 12 weeks of initial open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use mirtazapine for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see CLINICAL PHARMACOLOGY).",
"Description": "Mirtazapine tablets are an orally administered drug. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino[2,1-a] pyrido [2,3-c] benzazepine and has the empirical formula of C17H19N3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture. Mirtazapine is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are supplied for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine. Each tablet also contains corn starch, hydroxypropyl cellulose, magnesium stearate, colloidal silicon dioxide, lactose monohydrate, hypromellose and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black and iron oxide yellow."
},
{
"NDCCode": "24236-082-02",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (24236-082-02)",
"NDC11Code": "24236-0082-02",
"ProductNDC": "24236-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lithium Carbonate",
"NonProprietaryName": "Lithium Carbonate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20100812",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018558",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "LITHIUM CARBONATE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-09-22",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "27808-082-01",
"PackageDescription": "1 BOTTLE, UNIT-DOSE in 1 CARTON (27808-082-01) / 30 mL in 1 BOTTLE, UNIT-DOSE",
"NDC11Code": "27808-0082-01",
"ProductNDC": "27808-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Morphine Sulfate",
"NonProprietaryName": "Morphine Sulfate",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20150921",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203518",
"LabelerName": "Cranbury Pharmaceuticals, LLC",
"SubstanceName": "MORPHINE SULFATE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150921",
"SamplePackage": "N",
"IndicationAndUsage": "Morphine Sulfate Oral Solution 2 mg/mL is indicated for the management of: 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate., 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine)., 2 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine)."
},
{
"NDCCode": "31722-082-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (31722-082-30) ",
"NDC11Code": "31722-0082-30",
"ProductNDC": "31722-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20240821",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218174",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240821",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)]. Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is:. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, polyethylene glycol, pregelatinized starch (maize), and titanium dioxide."
},
{
"NDCCode": "40032-082-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (40032-082-03)",
"NDC11Code": "40032-0082-03",
"ProductNDC": "40032-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202829",
"LabelerName": "Novel Laboratories, Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "10; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": ". .",
"Description": "Amlodipine and Valsartan Tablets are a fixed combination of amlodipine and valsartan. Amlodipine and Valsartan Tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: 1 ."
},
{
"NDCCode": "41250-082-30",
"PackageDescription": "30 LOZENGE in 1 BAG (41250-082-30)",
"NDC11Code": "41250-0082-30",
"ProductNDC": "41250-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menthol Cough Drops",
"NonProprietaryName": "Menthol",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20140610",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Meijer Distribution Inc.",
"SubstanceName": "MENTHOL",
"StrengthNumber": "5.4",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2018-11-03",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "42291-082-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (42291-082-30) ",
"NDC11Code": "42291-0082-30",
"ProductNDC": "42291-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220411",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210000",
"LabelerName": "AvKARE",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220411",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].",
"Description": "Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "42731-082-01",
"PackageDescription": "30 mL in 1 BOTTLE, DROPPER (42731-082-01) ",
"NDC11Code": "42731-0082-01",
"ProductNDC": "42731-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Triple Flu Defense",
"NonProprietaryName": "Aconitum Napellus, Anas Barbariae, Hepatis Et Cordis Extractum, Bryonia (alba), Eupatorium Perfoliatum, Gelsemium Sempervirens, Influenzinum, Ipecacuanha, Nux Vomica, Phosphorus, Phytolacca Decandra, Sanguinaria Canadensis, Sticta Pulmonaria",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20250131",
"EndMarketingDate": "20291226",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Nenningers Naturals",
"SubstanceName": "ACONITUM NAPELLUS WHOLE; CAIRINA MOSCHATA HEART/LIVER AUTOLYSATE; BRYONIA ALBA ROOT; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; INFLUENZA A VIRUS WHOLE; INFLUENZA A VIRUS A/DARWIN/6/2021 (H3N2) WHOLE; INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 WHOLE; INFLUENZA B VIRUS B/PHUKET/3073/2013 BVR-1B WHOLE; IPECAC; STRYCHNOS NUX-VOMICA SEED; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; SANGUINARIA CANADENSIS ROOT; LOBARIA PULMONARIA",
"StrengthNumber": "30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30",
"StrengthUnit": "[hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20250131",
"EndMarketingDatePackage": "20291226",
"SamplePackage": "N",
"IndicationAndUsage": "Reduce duration and severity of flu-like symptoms.*. *This product has not been tested or the uses evaluated by the FDA."
},
{
"NDCCode": "42794-082-08",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (42794-082-08)",
"NDC11Code": "42794-0082-08",
"ProductNDC": "42794-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Acitretin",
"NonProprietaryName": "Acitretin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20150701",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204633",
"LabelerName": "Sigmapharm Laboratories, LLC",
"SubstanceName": "ACITRETIN",
"StrengthNumber": "22.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Retinoid [EPC],Retinoids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2015-11-18"
},
{
"NDCCode": "43353-082-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (43353-082-30) ",
"NDC11Code": "43353-0082-30",
"ProductNDC": "43353-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203769",
"LabelerName": "Aphena Pharma Solutions - Tennessee, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "850",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200513",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride tablet are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Tablets USP, are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin hydrochloride is a white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene hydrochloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Each Metformin Hydrochloride Tablets contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients pregelatinized starch (maize), povidone, crospovidone, magnesium stearate. In addition, the coating for the tablets contains hypromellose polyethylene glycol, titanium dioxide and flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol and silicon dioxide."
},
{
"NDCCode": "43386-082-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (43386-082-03) ",
"NDC11Code": "43386-0082-03",
"ProductNDC": "43386-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amlodipine And Valsartan",
"NonProprietaryName": "Amlodipine And Valsartan",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202829",
"LabelerName": "Lupin Pharmaceuticals,Inc.",
"SubstanceName": "AMLODIPINE BESYLATE; VALSARTAN",
"StrengthNumber": "10; 160",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150330",
"SamplePackage": "N",
"IndicationAndUsage": "Amlodipine and Valsartan Tablet are the combination tablets of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and Valsartan Tablets are indicated for the treatment of hypertension, to lower blood pressure: 1 In patients not adequately controlled on monotherapy (1), 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1).",
"Description": "Amlodipine and Valsartan Tablets are a fixed combination of amlodipine and valsartan. Amlodipine and Valsartan Tablets contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is. Its empirical formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to off-white hygroscopic powder, soluble in ethanol and methanol and insoluble in water. Valsartan's chemical name is N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4yl]methyl]-L-valine; its structural formula is. Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and Valsartan Tablets are formulated in 4 strengths for oral administration with a combination of amlodipine besylate (6.9 mg or 13.9 mg), equivalent to 5 mg or 10 mg of amlodipine respectively, with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, mannitol and sodium starch glycolate."
},
{
"NDCCode": "44717-082-01",
"PackageDescription": "30 mL in 1 BOTTLE, PLASTIC (44717-082-01) ",
"NDC11Code": "44717-0082-01",
"ProductNDC": "44717-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bronzing Blendrops Broad Spectrum Spf 40",
"NonProprietaryName": "Homosalate, Octisalate, Zinc Oxide",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240202",
"EndMarketingDate": "20270228",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Wasatch Product Development, LLC",
"SubstanceName": "HOMOSALATE; OCTISALATE; ZINC OXIDE",
"StrengthNumber": "6; 5; 12",
"StrengthUnit": "g/100mL; g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2025-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20240202",
"EndMarketingDatePackage": "20270228",
"SamplePackage": "N"
},
{
"NDCCode": "49348-082-30",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (49348-082-30) > 15 CAPSULE, LIQUID FILLED in 1 BLISTER PACK",
"NDC11Code": "49348-0082-30",
"ProductNDC": "49348-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Gas Relief",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Simethicone",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20130930",
"EndMarketingDate": "20191231",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "McKesson (Sunmark)",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130930",
"EndMarketingDatePackage": "20191231",
"SamplePackage": "N"
},
{
"NDCCode": "49349-082-02",
"PackageDescription": "30 CAPSULE in 1 BLISTER PACK (49349-082-02)",
"NDC11Code": "49349-0082-02",
"ProductNDC": "49349-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicyclomine Hydrochloride",
"NonProprietaryName": "Dicyclomine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20101120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA085082",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "DICYCLOMINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anticholinergic [EPC],Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2016-12-02"
},
{
"NDCCode": "49873-082-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (49873-082-01) / 30 TABLET in 1 BOTTLE",
"NDC11Code": "49873-0082-01",
"ProductNDC": "49873-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ringl",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19960509",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Sato Pharmaceutical Co., Ltd.",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "325",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2023-12-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19960509",
"SamplePackage": "N",
"IndicationAndUsage": "Uses■ for the temporary relief of minor aches and pains associated with: ■ a cold ■ sore throat ■ headache ■ toothache ■ muscular aches ■ backache ■ the premenstrual and menstrual periods (dysmenorrhea) ■ for minor pain from arthritis ■ to reduce fever."
},
{
"NDCCode": "51060-082-01",
"PackageDescription": "1 BOTTLE in 1 CARTON (51060-082-01) > 30 mL in 1 BOTTLE",
"NDC11Code": "51060-0082-01",
"ProductNDC": "51060-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rainforest Of The Sea Water Foundation Broad Spectrum Spf 15 Sunscreen",
"ProprietaryNameSuffix": "Light",
"NonProprietaryName": "Titanium Dioxide And Zinc Oxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150901",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Tarte, Inc",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "60; 40",
"StrengthUnit": "mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "51346-082-01",
"PackageDescription": "30 mL in 1 CARTON (51346-082-01)",
"NDC11Code": "51346-0082-01",
"ProductNDC": "51346-082",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The First Eye",
"NonProprietaryName": "Dimethicone",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110401",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part347",
"LabelerName": "NATURE REPUBLIC CO., LTD.",
"SubstanceName": "DIMETHICONE",
"StrengthNumber": ".81",
"StrengthUnit": "g/30mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "51407-082-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (51407-082-30) ",
"NDC11Code": "51407-0082-30",
"ProductNDC": "51407-082",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Colchicine",
"NonProprietaryName": "Colchicine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200205",
"EndMarketingDate": "20271231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210425",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "COLCHICINE",
"StrengthNumber": ".6",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Alkaloid [EPC], Alkaloids [CS]",
"Status": "Active",
"LastUpdate": "2026-08-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200724",
"EndMarketingDatePackage": "20270630",
"SamplePackage": "N",
"IndicationAndUsage": "Colchicine is an alkaloid indicated for: Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).",
"Description": "Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3,10-tetramethoxy-9-oxobenzo[alpha]heptalen-7-yl) acetamide with a molecular formula of C 22H 25NO 6and a molecular weight of 399.4. The structural formula of colchicine is given below:. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine tablets, USP are supplied for oral administration as purple, film-coated, capsule-shaped tablets (0.1575” X 0.3030”), debossed with “G 02” on one side and scored on the other, containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62332-082-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62332-082-30) </PackageDescription>
<NDC11Code>62332-0082-30</NDC11Code>
<ProductNDC>62332-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>62332-082-10</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 CARTON (62332-082-10) </PackageDescription>
<NDC11Code>62332-0082-10</NDC11Code>
<ProductNDC>62332-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>62332-082-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (62332-082-71) </PackageDescription>
<NDC11Code>62332-0082-71</NDC11Code>
<ProductNDC>62332-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>62332-082-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62332-082-90) </PackageDescription>
<NDC11Code>62332-0082-90</NDC11Code>
<ProductNDC>62332-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valsartan And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Valsartan And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160520</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201662</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VALSARTAN; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>320; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160520</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valsartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes, including hydrochlorothiazide and the angiotensin II receptor blocker (ARB) class to which valsartan principally belongs. There are no controlled trials demonstrating risk reduction with valsartan and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly.Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension e.g., patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Add-On Therapy. Valsartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Replacement Therapy. Valsartan and hydrochlorothiazide tabletsmay be substituted for the titrated components. Initial Therapy. Valsartan and hydrochlorothiazide tablets may be used as initial therapy in patients who are likely to need multiple drugs to achieve blood pressure goals. The choice of valsartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 hypertension are at a relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and should be shaped by considerations such as baseline blood pressure, the target goal and the incremental likelihood of achieving goal with a combination compared to monotherapy. Individual blood pressure goals may vary based upon the patient's risk. Data from the high dose multifactorial trial [see Clinical Studies (14.1)] provides estimates of the probability of reaching a target blood pressure with valsartan and hydrochlorothiazide tablets compared to valsartan or hydrochlorothiazide monotherapy. The figures below provide estimates of the likelihood of achieving systolic or diastolic blood pressure control with valsartan and hydrochlorothiazide tablets 320/25 mg, based upon baseline systolic or diastolic blood pressure. The curve of each treatment group was estimated by logistic regression modeling. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures. For example, a patient with a baseline blood pressure of 160/100 mmHg has about a 41% likelihood of achieving a goal of <140 mmHg (systolic) and 60% likelihood of achieving <90 mmHg (diastolic) on valsartan alone and the likelihood of achieving these goals on HCTZ alone is about 50% (systolic) or 57% (diastolic). The likelihood of achieving these goals on valsartan and hydrochlorothiazide tablets rises to about 84% (systolic) or 80% (diastolic). The likelihood of achieving these goals on placebo is about 23% (systolic) or 36% (diastolic).</IndicationAndUsage>
<Description>Valsartan and hydrochlorothiazide tablets are combination of valsartan, an orally active, specific angiotensin II receptor blocker (ARB) acting on the AT1 receptor subtype, and hydrochlorothiazide, a diuretic. Valsartan, a nonpeptide molecule, is chemically described as N-(1-oxopentyl)-N-[[2’-(1H-tetrazol-5-yl)[1,1’-biphenyl]-4-yl]methyl]-L-Valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan, USP is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Hydrochlorothiazide, USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide is chemically described as 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Hydrochlorothiazide is a thiazide diuretic. Its empirical formula is C7H8ClN3O4S2, its molecular weight is 297.73, and its structural formula is. Valsartan and hydrochlorothiazide tablets, USP are formulated for oral administration to contain valsartan and hydrochlorothiazide, USP 80/12.5 mg, 160/12.5 mg, 160/25 mg, 320/12.5 mg and 320/25 mg. The inactive ingredients of the tablets are colloidal silicon dioxide, crospovidone, hydroxypropyl methylcellulose, red iron oxide, yellow iron oxide, black iron oxide, magnesium stearate, microcrystalline cellulose, polyethylene glycol, talc, and titanium dioxide. Drug product complies with USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>10544-082-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (10544-082-30)</PackageDescription>
<NDC11Code>10544-0082-30</NDC11Code>
<ProductNDC>10544-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cephalexin</ProprietaryName>
<NonProprietaryName>Cephalexin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120801</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062713</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>CEPHALEXIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Cephalexin capsules are indicated for the treatment of the following infections when caused by susceptible strains of the designated microorganisms. Respiratory tract infections caused by Streptococcus pneumoniae and Streptococcus pyogenes (Penicillin is the usual drug of choice in the treatment and prevention of streptococcal infections, including the prophylaxis of rheumatic fever. Cephalexin is generally effective in the eradication of streptococci from the nasopharynx; however, substantial data establishing the efficacy of cephalexin in the subsequent prevention of rheumatic fever are not available at present.). Otitis media due to Streptococcus pneumoniae, Haemophilus influenzae, Staphylococcus aureus, Streptococcus pyogenes, and Moraxella catarrhalis. Skin and skin structure infections caused by Staphylococcus aureus and/or Streptococcus pyogenes. Bone infections caused by Staphylococcus aureus and/or Proteus mirabilis. Genitourinary tract infections, including acute prostatitis, caused by Escherichia coli, Proteus mirabilis, and Klebsiella pneumoniae. Note: Culture and susceptibility tests should be initiated prior to and during therapy. Renal function studies should be performed when indicated. To reduce the development of drug-resistant bacteria and maintain the effectiveness of cephalexin and other antibacterial drugs, cephalexin capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Cephalexin, USP is a semisynthetic cephalosporin antibiotic intended for oral administration. It is 7-(D-α-Amino-α-phenylacetamido)-3-methyl-3-cephem-4-carboxylic acid monohydrate. Cephalexin has the molecular formula C 16H 17N 3O 4SH 2O and the molecular weight is 365.41. Cephalexin has the following structural formula. The nucleus of cephalexin is related to that of other cephalosporin antibiotics. The compound is a zwitterion; i.e., the molecule contains both a basic and an acidic group. The isoelectric point of cephalexin in water is approximately 4.5 to 5. The crystalline form of cephalexin which is available is a monohydrate. It is a white crystalline solid having a bitter taste. Solubility in water is low at room temperature; 1 or 2 mg/mL may be dissolved readily, but higher concentrations are obtained with increasing difficulty. The cephalosporins differ from penicillins in the structure of the bicyclic ring system. Cephalexin has a D-phenylglycyl group as substituent at the 7-amino position and an unsubstituted methyl group at the 3-position. Each capsule contains cephalexin monohydrate equivalent to 250 mg or 500 mg of cephalexin. The capsules also contain anhydrous lactose, gelatin, magnesium stearate, talc and titanium dioxide. The capsules are imprinted with edible ink containing black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>13107-082-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (13107-082-30) </PackageDescription>
<NDC11Code>13107-0082-30</NDC11Code>
<ProductNDC>13107-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Trazodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Trazodone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150915</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204852</ApplicationNumber>
<LabelerName>Aurolife Pharma LLC</LabelerName>
<SubstanceName>TRAZODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Trazodone Hydrochloride Tablets are indicated for the treatment of major depressive disorder (MDD) in adults.</IndicationAndUsage>
<Description>Trazodone hydrochloride tablets for oral administration contain trazodone hydrochloride, a selective serotonin reuptake inhibitor and 5HT2 receptor antagonist. Trazodone hydrochloride is a triazolopyridine derivative designated as 2-[3-[4-(3-chlorophenyl)-1piperazinyl]propyl]-1,2,4-triazolo [4,3-a]pyridin-3(2H)-one hydrochloride. It is a white odorless crystalline powder which is freely soluble in water. The structural formula is represented as follows. Molecular Formula: C19H22CIN5O HCl. Molecular Weight: 408.33. Each tablet, for oral administration, contains 50 mg, 100 mg, 150 mg or 300 mg of trazodone hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (physically modified corn (maize) starch), sodium lauryl sulfate, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>13537-082-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-082-02) > 30 g in 1 TUBE (13537-082-01)</PackageDescription>
<NDC11Code>13537-0082-02</NDC11Code>
<ProductNDC>13537-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Effet Parfait Mineral Natural Skin Effect Mousse Foundation Spf 16</ProprietaryName>
<ProprietaryNameSuffix>Medium 6- Beige</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>PASTE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161102</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>.065; .024; .015</StrengthNumber>
<StrengthUnit>g/g; g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13811-082-30</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE (13811-082-30)</PackageDescription>
<NDC11Code>13811-0082-30</NDC11Code>
<ProductNDC>13811-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Trigofen Dm</ProprietaryName>
<NonProprietaryName>Chlorpheniramine Maleate, Dextromethorphan Hydrobromide, And Phenylephrine Hydrochloride</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110401</StartMarketingDate>
<EndMarketingDate>20140830</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>TRIGEN Laboratories, Inc.</LabelerName>
<SubstanceName>CHLORPHENIRAMINE MALEATE; DEXTROMETHORPHAN HYDROBROMIDE; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1; 3; 2</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-09-05</LastUpdate>
</NDC>
<NDC>
<NDCCode>14141-082-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (14141-082-02) > 30 g in 1 TUBE (14141-082-01) </PackageDescription>
<NDC11Code>14141-0082-02</NDC11Code>
<ProductNDC>14141-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Mousse Matiffiant Matte Finish Mousse Foundation Spf 15</ProprietaryName>
<ProprietaryNameSuffix>Claire 4/ Beige</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate, Titanium Dioxide, And Zinc Oxide</NonProprietaryName>
<DosageFormName>PASTE</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180808</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Bel Star S.A. (Colombia)</LabelerName>
<SubstanceName>OCTINOXATE; TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>.065; .0244; .0157</StrengthNumber>
<StrengthUnit>g/g; g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16590-082-30</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE, PLASTIC (16590-082-30)</PackageDescription>
<NDC11Code>16590-0082-30</NDC11Code>
<ProductNDC>16590-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19840507</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062396</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of Doxycycline Hyclate Capsules, USP and other antibacterial drugs, doxycycline hyclate capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Doxycycline hyclate is a broad-spectrum antibiotic synthetically derived from oxytetracycline. The structural formula is as follows. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. Doxycycline is a light yellow crystalline powder. Doxycycline hyclate is soluble in water. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Each capsule for oral administration contains doxycycline hyclate equivalent to 50 mg or 100 mg of doxycycline (anhydrous). Inactive ingredients: lactose monohydrate, microcrystalline cellulose, magnesium stearate. 100 mg gelatin capsule shell contains: FD&C Blue #1, silicon dioxide, sodium lauryl sulfate and titanium dioxide. The printing ink contains: D&C Yellow #10, FD&C Blue #1, FD&C Blue #2, FD&C Red #40, n-Butyl Alcohol, Pharmaceutical Glaze, Propylene Glycol, SDA-3A Alcohol and Synthetic Black Iron Oxide.</Description>
</NDC>
<NDC>
<NDCCode>16714-082-01</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (16714-082-01)</PackageDescription>
<NDC11Code>16714-0082-01</NDC11Code>
<ProductNDC>16714-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040842</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-07-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>16714-082-07</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (16714-082-07)</PackageDescription>
<NDC11Code>16714-0082-07</NDC11Code>
<ProductNDC>16714-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040842</ApplicationNumber>
<LabelerName>Northstar RxLLC</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-07-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>21695-082-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (21695-082-30)</PackageDescription>
<NDC11Code>21695-0082-30</NDC11Code>
<ProductNDC>21695-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mirtazapine</ProprietaryName>
<NonProprietaryName>Mirtazapine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041022</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076921</ApplicationNumber>
<LabelerName>Rebel Distributors Corp.</LabelerName>
<SubstanceName>MIRTAZAPINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Mirtazapine tablets are indicated for the treatment of major depressive disorder. The efficacy of mirtazapine in the treatment of major depressive disorder was established in six week controlled trials of outpatients whose diagnoses corresponded most closely to the Diagnostic and Statistical Manual of Mental Disorders-3rd edition (DSM-III) category of major depressive disorder (see CLINICAL PHARMACOLOGY). A major depressive episode (DSM-IV) implies a prominent and relatively persistent (nearly every day for at least 2 weeks) depressed or dysphoric mood that usually interferes with daily functioning, and includes at least five of the following nine symptoms: depressed mood, loss of interest in usual activities, significant change in weight and/or appetite, insomnia or hypersomnia, psychomotor agitation or retardation, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, a suicide attempt or suicidal ideation. The effectiveness of mirtazapine in hospitalized depressed patients has not been adequately studied. The efficacy of mirtazapine in maintaining a response in patients with major depressive disorder for up to 40 weeks following 8 to 12 weeks of initial open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use mirtazapine for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see CLINICAL PHARMACOLOGY).</IndicationAndUsage>
<Description>Mirtazapine tablets are an orally administered drug. Mirtazapine has a tetracyclic chemical structure and belongs to the piperazino-azepine group of compounds. It is designated 1,2,3,4,10,14b-hexahydro-2-methylpyrazino[2,1-a] pyrido [2,3-c] benzazepine and has the empirical formula of C17H19N3. Its molecular weight is 265.36. The structural formula is the following and it is the racemic mixture. Mirtazapine is a white to creamy white crystalline powder which is slightly soluble in water. Mirtazapine tablets are supplied for oral administration as scored film-coated tablets containing 15 or 30 mg of mirtazapine, and unscored film-coated tablets containing 7.5 or 45 mg of mirtazapine. Each tablet also contains corn starch, hydroxypropyl cellulose, magnesium stearate, colloidal silicon dioxide, lactose monohydrate, hypromellose and titanium dioxide. In addition, the 15 mg contains iron oxide yellow and 30 mg contains iron oxide red, iron oxide black and iron oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>24236-082-02</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (24236-082-02)</PackageDescription>
<NDC11Code>24236-0082-02</NDC11Code>
<ProductNDC>24236-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lithium Carbonate</ProprietaryName>
<NonProprietaryName>Lithium Carbonate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100812</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018558</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>LITHIUM CARBONATE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-09-22</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>27808-082-01</NDCCode>
<PackageDescription>1 BOTTLE, UNIT-DOSE in 1 CARTON (27808-082-01) / 30 mL in 1 BOTTLE, UNIT-DOSE</PackageDescription>
<NDC11Code>27808-0082-01</NDC11Code>
<ProductNDC>27808-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Morphine Sulfate</ProprietaryName>
<NonProprietaryName>Morphine Sulfate</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150921</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203518</ApplicationNumber>
<LabelerName>Cranbury Pharmaceuticals, LLC</LabelerName>
<SubstanceName>MORPHINE SULFATE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Morphine Sulfate Oral Solution 2 mg/mL is indicated for the management of: 1 adults with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate., 2 pediatric patients 2 years of age and older with pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Morphine Sulfate Oral Solution is an opioid agonist, available in the following concentrations for oral administration: 1 10 mg per 5 mL (2 mg/mL): Each 1 mL of oral solution contains 2 mg of morphine sulfate, USP (equivalent to 1.5 mg morphine)., 2 100 mg per 5 mL (20 mg/mL): Each 1 mL of oral solution contains 20 mg of morphine sulfate, USP (equivalent to 15 mg morphine).</Description>
</NDC>
<NDC>
<NDCCode>31722-082-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (31722-082-30) </PackageDescription>
<NDC11Code>31722-0082-30</NDC11Code>
<ProductNDC>31722-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240821</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218174</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240821</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: Treatment of adult and adolescent patients (13 to 17 years) with schizophrenia [see Clinical Studies ( 14.1)] . Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)]. Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies ( 14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3a R,4 S,7 R,7a S)-2-{(1 R,2 R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1-ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2 H-isoindole-1,3-dione hydrochloride. Its molecular formula is C 28H 36N 4O 2S·HCl and its molecular weight is 529.14. The chemical structure is:. Lurasidone hydrochloride is a white to off-white powder. It is very slightly soluble in methanol. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg, or 120 mg of lurasidone hydrochloride. Inactive ingredients are croscarmellose sodium, hypromellose, magnesium stearate, mannitol, polyethylene glycol, pregelatinized starch (maize), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>40032-082-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (40032-082-03)</PackageDescription>
<NDC11Code>40032-0082-03</NDC11Code>
<ProductNDC>40032-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202829</ApplicationNumber>
<LabelerName>Novel Laboratories, Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA],Dihydropyridine Calcium Channel Blocker [EPC],Dihydropyridines [CS],Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>. .</IndicationAndUsage>
<Description>Amlodipine and Valsartan Tablets are a fixed combination of amlodipine and valsartan. Amlodipine and Valsartan Tablets contain the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate’s chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is: 1 .</Description>
</NDC>
<NDC>
<NDCCode>41250-082-30</NDCCode>
<PackageDescription>30 LOZENGE in 1 BAG (41250-082-30)</PackageDescription>
<NDC11Code>41250-0082-30</NDC11Code>
<ProductNDC>41250-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menthol Cough Drops</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140610</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Meijer Distribution Inc.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>5.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-11-03</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>42291-082-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (42291-082-30) </PackageDescription>
<NDC11Code>42291-0082-30</NDC11Code>
<ProductNDC>42291-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220411</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210000</ApplicationNumber>
<LabelerName>AvKARE</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220411</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin tablets are macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration ( 2)].</IndicationAndUsage>
<Description>Azithromycin tablets, USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)13-[(2,6-dideoxy-3-C-methyl-3-O-methyl- α-L-ribo-hexopyranosyl) oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)- β-D-xylo-hexopyranosyl]oxy]-1 oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38H 72N 2O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C 38H 72N 2O 122H 2O and a molecular weight of 785.02. Azithromycin is supplied as tablets containing azithromycin dihydrate, USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, polyethylene glycol, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>42731-082-01</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, DROPPER (42731-082-01) </PackageDescription>
<NDC11Code>42731-0082-01</NDC11Code>
<ProductNDC>42731-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Triple Flu Defense</ProprietaryName>
<NonProprietaryName>Aconitum Napellus, Anas Barbariae, Hepatis Et Cordis Extractum, Bryonia (alba), Eupatorium Perfoliatum, Gelsemium Sempervirens, Influenzinum, Ipecacuanha, Nux Vomica, Phosphorus, Phytolacca Decandra, Sanguinaria Canadensis, Sticta Pulmonaria</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250131</StartMarketingDate>
<EndMarketingDate>20291226</EndMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Nenningers Naturals</LabelerName>
<SubstanceName>ACONITUM NAPELLUS WHOLE; CAIRINA MOSCHATA HEART/LIVER AUTOLYSATE; BRYONIA ALBA ROOT; EUPATORIUM PERFOLIATUM FLOWERING TOP; GELSEMIUM SEMPERVIRENS ROOT; INFLUENZA A VIRUS WHOLE; INFLUENZA A VIRUS A/DARWIN/6/2021 (H3N2) WHOLE; INFLUENZA B VIRUS B/AUSTRIA/1359417/2021 BVR-26 WHOLE; INFLUENZA B VIRUS B/PHUKET/3073/2013 BVR-1B WHOLE; IPECAC; STRYCHNOS NUX-VOMICA SEED; PHOSPHORUS; PHYTOLACCA AMERICANA ROOT; SANGUINARIA CANADENSIS ROOT; LOBARIA PULMONARIA</SubstanceName>
<StrengthNumber>30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30; 30</StrengthNumber>
<StrengthUnit>[hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL; [hp_C]/mL</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Increased IgG Production [PE], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Seed Storage Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20250131</StartMarketingDatePackage>
<EndMarketingDatePackage>20291226</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduce duration and severity of flu-like symptoms.*. *This product has not been tested or the uses evaluated by the FDA.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>42794-082-08</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (42794-082-08)</PackageDescription>
<NDC11Code>42794-0082-08</NDC11Code>
<ProductNDC>42794-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Acitretin</ProprietaryName>
<NonProprietaryName>Acitretin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150701</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204633</ApplicationNumber>
<LabelerName>Sigmapharm Laboratories, LLC</LabelerName>
<SubstanceName>ACITRETIN</SubstanceName>
<StrengthNumber>22.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Retinoid [EPC],Retinoids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2015-11-18</LastUpdate>
</NDC>
<NDC>
<NDCCode>43353-082-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43353-082-30) </PackageDescription>
<NDC11Code>43353-0082-30</NDC11Code>
<ProductNDC>43353-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203769</ApplicationNumber>
<LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>850</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200513</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride tablet are indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Tablets USP, are oral antihyperglycemic drugs used in the management of type 2 diabetes. Metformin hydrochloride (N,N-dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown. Metformin hydrochloride is a white crystalline compound with a molecular formula of C4H11N5 HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water, slightly soluble in alcohol, practically insoluble in acetone and in methylene hydrochloride. The pKa of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Each Metformin Hydrochloride Tablets contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride. Each tablet contains the inactive ingredients pregelatinized starch (maize), povidone, crospovidone, magnesium stearate. In addition, the coating for the tablets contains hypromellose polyethylene glycol, titanium dioxide and flavoring agent contains dextrose, ethyl alcohol, gum arabic, propylene glycol and silicon dioxide.</Description>
</NDC>
<NDC>
<NDCCode>43386-082-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (43386-082-03) </PackageDescription>
<NDC11Code>43386-0082-03</NDC11Code>
<ProductNDC>43386-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amlodipine And Valsartan</ProprietaryName>
<NonProprietaryName>Amlodipine And Valsartan</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202829</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals,Inc.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE; VALSARTAN</SubstanceName>
<StrengthNumber>10; 160</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amlodipine and Valsartan Tablet are the combination tablets of amlodipine, a dihydropyridine calcium channel blocker (DHP CCB), and valsartan, an angiotensin II receptor blocker (ARB). Amlodipine and Valsartan Tablets are indicated for the treatment of hypertension, to lower blood pressure: 1 In patients not adequately controlled on monotherapy (1), 2 As initial therapy in patients likely to need multiple drugs to achieve their blood pressure goals (1).</IndicationAndUsage>
<Description>Amlodipine and Valsartan Tablets are a fixed combination of amlodipine and valsartan. Amlodipine and Valsartan Tablets contains the besylate salt of amlodipine, a dihydropyridine calcium-channel blocker (CCB). Amlodipine besylate is a white to almost white powder, slightly soluble in water and sparingly soluble in ethanol. Amlodipine besylate's chemical name is 3-Ethyl-5-methyl(4RS)-2-[(2-aminoethoxy)methyl]-4-(2-chlorophenyl)-6-methyl-1,4-dihydropyridine-3,5-dicarboxylate benzenesulphonate; its structural formula is. Its empirical formula is C20H25ClN2O5C6H6O3S and its molecular weight is 567.1. Valsartan is a nonpeptide, orally active, and specific angiotensin II antagonist acting on the AT1 receptor subtype. Valsartan is a white to off-white hygroscopic powder, soluble in ethanol and methanol and insoluble in water. Valsartan's chemical name is N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4yl]methyl]-L-valine; its structural formula is. Its empirical formula is C24H29N5O3 and its molecular weight is 435.5. Amlodipine and Valsartan Tablets are formulated in 4 strengths for oral administration with a combination of amlodipine besylate (6.9 mg or 13.9 mg), equivalent to 5 mg or 10 mg of amlodipine respectively, with 160 mg, or 320 mg of valsartan providing for the following available combinations: 5/160 mg, 10/160 mg, 5/320 mg, and 10/320 mg. The inactive ingredients for all strengths of the tablets are colloidal silicon dioxide, crospovidone, magnesium stearate, microcrystalline cellulose, mannitol and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>44717-082-01</NDCCode>
<PackageDescription>30 mL in 1 BOTTLE, PLASTIC (44717-082-01) </PackageDescription>
<NDC11Code>44717-0082-01</NDC11Code>
<ProductNDC>44717-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bronzing Blendrops Broad Spectrum Spf 40</ProprietaryName>
<NonProprietaryName>Homosalate, Octisalate, Zinc Oxide</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240202</StartMarketingDate>
<EndMarketingDate>20270228</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Wasatch Product Development, LLC</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; ZINC OXIDE</SubstanceName>
<StrengthNumber>6; 5; 12</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20240202</StartMarketingDatePackage>
<EndMarketingDatePackage>20270228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49348-082-30</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (49348-082-30) > 15 CAPSULE, LIQUID FILLED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>49348-0082-30</NDC11Code>
<ProductNDC>49348-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Gas Relief</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Simethicone</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130930</StartMarketingDate>
<EndMarketingDate>20191231</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>McKesson (Sunmark)</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130930</StartMarketingDatePackage>
<EndMarketingDatePackage>20191231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>49349-082-02</NDCCode>
<PackageDescription>30 CAPSULE in 1 BLISTER PACK (49349-082-02)</PackageDescription>
<NDC11Code>49349-0082-02</NDC11Code>
<ProductNDC>49349-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicyclomine Hydrochloride</ProprietaryName>
<NonProprietaryName>Dicyclomine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA085082</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>DICYCLOMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC],Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-12-02</LastUpdate>
</NDC>
<NDC>
<NDCCode>49873-082-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (49873-082-01) / 30 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>49873-0082-01</NDC11Code>
<ProductNDC>49873-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ringl</ProprietaryName>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19960509</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Sato Pharmaceutical Co., Ltd.</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>325</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-12-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960509</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses■ for the temporary relief of minor aches and pains associated with: ■ a cold ■ sore throat ■ headache ■ toothache ■ muscular aches ■ backache ■ the premenstrual and menstrual periods (dysmenorrhea) ■ for minor pain from arthritis ■ to reduce fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51060-082-01</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (51060-082-01) > 30 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>51060-0082-01</NDC11Code>
<ProductNDC>51060-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rainforest Of The Sea Water Foundation Broad Spectrum Spf 15 Sunscreen</ProprietaryName>
<ProprietaryNameSuffix>Light</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide And Zinc Oxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150901</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Tarte, Inc</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>60; 40</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51346-082-01</NDCCode>
<PackageDescription>30 mL in 1 CARTON (51346-082-01)</PackageDescription>
<NDC11Code>51346-0082-01</NDC11Code>
<ProductNDC>51346-082</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The First Eye</ProprietaryName>
<NonProprietaryName>Dimethicone</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110401</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part347</ApplicationNumber>
<LabelerName>NATURE REPUBLIC CO., LTD.</LabelerName>
<SubstanceName>DIMETHICONE</SubstanceName>
<StrengthNumber>.81</StrengthNumber>
<StrengthUnit>g/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>51407-082-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (51407-082-30) </PackageDescription>
<NDC11Code>51407-0082-30</NDC11Code>
<ProductNDC>51407-082</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Colchicine</ProprietaryName>
<NonProprietaryName>Colchicine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200205</StartMarketingDate>
<EndMarketingDate>20271231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210425</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>COLCHICINE</SubstanceName>
<StrengthNumber>.6</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Alkaloid [EPC], Alkaloids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200724</StartMarketingDatePackage>
<EndMarketingDatePackage>20270630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Colchicine is an alkaloid indicated for: Familial Mediterranean fever (FMF) in adults and children 4 years or older (1.2).</IndicationAndUsage>
<Description>Colchicine is an alkaloid chemically described as (S)N-(5,6,7,9-tetrahydro-1,2,3,10-tetramethoxy-9-oxobenzo[alpha]heptalen-7-yl) acetamide with a molecular formula of C 22H 25NO 6and a molecular weight of 399.4. The structural formula of colchicine is given below:. Colchicine occurs as a pale yellow powder that is soluble in water. Colchicine tablets, USP are supplied for oral administration as purple, film-coated, capsule-shaped tablets (0.1575” X 0.3030”), debossed with “G 02” on one side and scored on the other, containing 0.6 mg of the active ingredient colchicine, USP. Inactive ingredients: FD&C blue #2, FD&C red #40, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polydextrose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, titanium dioxide and triacetin.</Description>
</NDC>
</NDCList>