RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "62332-150-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-150-10) ",
      "NDC11Code": "62332-0150-10",
      "ProductNDC": "62332-150",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170424",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204233",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "40; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2025-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170424",
      "SamplePackage": "N",
      "IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension.",
      "Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are a combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil is a white or almost white, crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide   tablets   are   available   for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropyl cellulose, hypromellose, iron oxide yellow, lactose, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, PEG 4000, titanium dioxide."
    },
    {
      "NDCCode": "62332-150-08",
      "PackageDescription": "80 TABLET in 1 CARTON (62332-150-08) ",
      "NDC11Code": "62332-0150-08",
      "ProductNDC": "62332-150",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170424",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204233",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "40; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2025-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170424",
      "SamplePackage": "N",
      "IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension.",
      "Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are a combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil is a white or almost white, crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide   tablets   are   available   for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropyl cellulose, hypromellose, iron oxide yellow, lactose, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, PEG 4000, titanium dioxide."
    },
    {
      "NDCCode": "62332-150-30",
      "PackageDescription": "30 TABLET in 1 BOTTLE (62332-150-30) ",
      "NDC11Code": "62332-0150-30",
      "ProductNDC": "62332-150",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170424",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204233",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "40; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2025-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170424",
      "SamplePackage": "N",
      "IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension.",
      "Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are a combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil is a white or almost white, crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide   tablets   are   available   for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropyl cellulose, hypromellose, iron oxide yellow, lactose, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, PEG 4000, titanium dioxide."
    },
    {
      "NDCCode": "62332-150-90",
      "PackageDescription": "90 TABLET in 1 BOTTLE (62332-150-90) ",
      "NDC11Code": "62332-0150-90",
      "ProductNDC": "62332-150",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170424",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204233",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "40; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2025-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170424",
      "SamplePackage": "N",
      "IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension.",
      "Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are a combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil is a white or almost white, crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide   tablets   are   available   for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropyl cellulose, hypromellose, iron oxide yellow, lactose, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, PEG 4000, titanium dioxide."
    },
    {
      "NDCCode": "62332-150-91",
      "PackageDescription": "1000 TABLET in 1 BOTTLE (62332-150-91) ",
      "NDC11Code": "62332-0150-91",
      "ProductNDC": "62332-150",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "NonProprietaryName": "Olmesartan Medoxomil And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170424",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA204233",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "OLMESARTAN MEDOXOMIL; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "40; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2025-07-03",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170424",
      "SamplePackage": "N",
      "IndicationAndUsage": "Olmesartan medoxomil and hydrochlorothiazide tablets are indicated for the treatment of hypertension, to lower blood pressure [see Dosage and Administration (2)]. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular (CV) events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including the class to which this drug principally belongs. There are no controlled trials demonstrating risk reduction with olmesartan medoxomil and hydrochlorothiazide tablets. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Olmesartan medoxomil and hydrochlorothiazide tablets may be used alone or in combination with other antihypertensive drugs. Limitations of Use. Olmesartan medoxomil and hydrochlorothiazide tablet is not indicated for the initial therapy of hypertension.",
      "Description": "Olmesartan medoxomil and hydrochlorothiazide tablets are a combination of an angiotensin II receptor antagonist (AT1 subtype), olmesartan medoxomil, and a thiazide diuretic, hydrochlorothiazide (HCTZ). Olmesartan medoxomil is 2,3-dihydroxy-2-butenyl 4-(1-hydroxy-1-methylethyl)-2-propyl-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-carboxylate, cyclic 2,3-carbonate. Its empirical formula is C29H30N6O6 and its structural formula is. Olmesartan medoxomil is a white or almost white, crystalline powder with a molecular weight of 558.6. It is practically insoluble in water and sparingly soluble in methanol.Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide is a white, or practically white, crystalline powder with a molecular weight of 297.7. Hydrochlorothiazide is slightly soluble in water but freely soluble in sodium hydroxide solution.Olmesartan medoxomil and hydrochlorothiazide   tablets   are   available   for oral administration in tablets containing 20 mg or 40 mg of olmesartan medoxomil combined with 12.5 mg of hydrochlorothiazide, or 40 mg of olmesartan medoxomil combined with 25 mg of hydrochlorothiazide. Inactive ingredients include: hydroxypropyl cellulose, hypromellose, iron oxide yellow, lactose, low substituted hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, PEG 4000, titanium dioxide."
    },
    {
      "NDCCode": "62332-491-41",
      "PackageDescription": "150 CAPSULE in 1 BOTTLE (62332-491-41) ",
      "NDC11Code": "62332-0491-41",
      "ProductNDC": "62332-491",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Tizanidine Hydrochloride",
      "NonProprietaryName": "Tizanidine Hydrochloride",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20200115",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213223",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "TIZANIDINE HYDROCHLORIDE",
      "StrengthNumber": "2",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200115",
      "SamplePackage": "N",
      "IndicationAndUsage": "Tizanidine hydrochloride is indicated for the treatment management of spasticity in adults.",
      "Description": "Tizanidine hydrochloride capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol.  Tizanidine hydrochloride capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride, respectively), and the inactive ingredients, colloidal silicon dioxide, ethyl acrylate copolymer, hypromellose, methacrylic acid, sugar spheres (composed of corn starch, purified water, and sucrose), talc and triethyl citrate. Each empty hard gelatin capsule shell contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains iron oxide black, potassium hydroxide and shellac."
    },
    {
      "NDCCode": "62332-492-41",
      "PackageDescription": "150 CAPSULE in 1 BOTTLE (62332-492-41) ",
      "NDC11Code": "62332-0492-41",
      "ProductNDC": "62332-492",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Tizanidine Hydrochloride",
      "NonProprietaryName": "Tizanidine Hydrochloride",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20200115",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213223",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "TIZANIDINE HYDROCHLORIDE",
      "StrengthNumber": "4",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200115",
      "SamplePackage": "N",
      "IndicationAndUsage": "Tizanidine hydrochloride is indicated for the treatment management of spasticity in adults.",
      "Description": "Tizanidine hydrochloride capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol.  Tizanidine hydrochloride capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride, respectively), and the inactive ingredients, colloidal silicon dioxide, ethyl acrylate copolymer, hypromellose, methacrylic acid, sugar spheres (composed of corn starch, purified water, and sucrose), talc and triethyl citrate. Each empty hard gelatin capsule shell contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains iron oxide black, potassium hydroxide and shellac."
    },
    {
      "NDCCode": "62332-493-41",
      "PackageDescription": "150 CAPSULE in 1 BOTTLE (62332-493-41) ",
      "NDC11Code": "62332-0493-41",
      "ProductNDC": "62332-493",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Tizanidine Hydrochloride",
      "NonProprietaryName": "Tizanidine Hydrochloride",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20200115",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA213223",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "TIZANIDINE HYDROCHLORIDE",
      "StrengthNumber": "6",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-02-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200115",
      "SamplePackage": "N",
      "IndicationAndUsage": "Tizanidine hydrochloride is indicated for the treatment management of spasticity in adults.",
      "Description": "Tizanidine hydrochloride capsules contains tizanidine hydrochloride as the active ingredient, which is a central alpha2-adrenergic agonist. Its chemical name is 5-chloro-4-(2-imidazolin-2-ylamino)-2,1,3-benzothiadiazole monohydrochloride. It has a molecular formula of C9H8ClN5S-HCl and a molecular weight of 290.2. Its structural formula is. Tizanidine hydrochloride is almost white to slightly yellow crystalline substance. Tizanidine is slightly soluble in water and methanol.  Tizanidine hydrochloride capsules are for oral administration and contain 2, 4, or 6 mg tizanidine (equivalent to 2.29 mg, 4.58 mg, and 6.87 mg tizanidine hydrochloride, respectively), and the inactive ingredients, colloidal silicon dioxide, ethyl acrylate copolymer, hypromellose, methacrylic acid, sugar spheres (composed of corn starch, purified water, and sucrose), talc and triethyl citrate. Each empty hard gelatin capsule shell contains FD&C Blue No.1, gelatin, sodium lauryl sulfate and titanium dioxide. Additionally, 4 mg and 6 mg empty hard gelatin capsule shell contains FD&C Red No. 3. The printing ink contains iron oxide black, potassium hydroxide and shellac."
    },
    {
      "NDCCode": "62332-001-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-001-10) ",
      "NDC11Code": "62332-0001-10",
      "ProductNDC": "62332-001",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Famotidine",
      "NonProprietaryName": "Famotidine",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160129",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078916",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "FAMOTIDINE",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-01-22",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160129",
      "SamplePackage": "N",
      "IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: : 1 active duodenal ulcer (DU). , 2 active gastric ulcer (GU). , 3 symptomatic nonerosive gastroesophageal reflux disease (GERD). , 4 erosive esophagitis due to GERD, diagnosed by biopsy. .",
      "Description": "The active ingredient in famotidine tablets, USP is a histamine-2 (H2) receptor antagonist. Famotidine is N’-(aminosulfonyl)-3-[[[2[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.43. Its structural formula is. Each famotidine tablet, USP for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, yellow iron oxide and red iron oxide, Lecithin, macrogel/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Famotidine, USP is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol."
    },
    {
      "NDCCode": "62332-002-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-002-10) ",
      "NDC11Code": "62332-0002-10",
      "ProductNDC": "62332-002",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Famotidine",
      "NonProprietaryName": "Famotidine",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160129",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078916",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "FAMOTIDINE",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-01-22",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160129",
      "SamplePackage": "N",
      "IndicationAndUsage": "Famotidine tablets are indicated in adult and pediatric patients 40 kg and greater for the treatment of: : 1 active duodenal ulcer (DU). , 2 active gastric ulcer (GU). , 3 symptomatic nonerosive gastroesophageal reflux disease (GERD). , 4 erosive esophagitis due to GERD, diagnosed by biopsy. .",
      "Description": "The active ingredient in famotidine tablets, USP is a histamine-2 (H2) receptor antagonist. Famotidine is N’-(aminosulfonyl)-3-[[[2[(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propanimidamide. The empirical formula of famotidine is C8H15N7O2S3 and its molecular weight is 337.43. Its structural formula is. Each famotidine tablet, USP for oral administration contains either 20 mg or 40 mg of famotidine and the following inactive ingredients: colloidal silicon dioxide, yellow iron oxide and red iron oxide, Lecithin, macrogel/PEG 3350, magnesium stearate, microcrystalline cellulose, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Famotidine, USP is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol."
    },
    {
      "NDCCode": "62332-044-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-044-10) ",
      "NDC11Code": "62332-0044-10",
      "ProductNDC": "62332-044",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160520",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091367",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-08-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160520",
      "SamplePackage": "N",
      "Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
    },
    {
      "NDCCode": "62332-045-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-045-10) ",
      "NDC11Code": "62332-0045-10",
      "ProductNDC": "62332-045",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160520",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091367",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "80",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-08-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160520",
      "SamplePackage": "N",
      "Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
    },
    {
      "NDCCode": "62332-046-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-046-10) ",
      "NDC11Code": "62332-0046-10",
      "ProductNDC": "62332-046",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Valsartan",
      "NonProprietaryName": "Valsartan",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160520",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091367",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "VALSARTAN",
      "StrengthNumber": "160",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-08-31",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160520",
      "SamplePackage": "N",
      "Description": "Valsartan is a nonpeptide, orally active, and specific angiotensin II receptor blocker acting on the AT1 receptor subtype. Valsartan is chemically described as N-(1-oxopentyl)-N-[[2'-(1H-tetrazol-5-yl) [1,1'-biphenyl]-4-yl]methyl]-L-valine. Its empirical formula is C24H29N5O3, its molecular weight is 435.5, and its structural formula is. Valsartan is a white to practically white fine powder. It is soluble in ethanol and methanol and slightly soluble in water. Valsartan is available as tablets for oral administration, containing 40 mg, 80 mg, 160 mg or 320 mg of valsartan. The inactive ingredients of the tablets are microcrystalline cellulose, lactose monohydrate, croscarmellose sodium, pregelatinised starch, poloxamer 188, colloidal silicon dioxide, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol. Additionally Valsartan 40 mg contains Iron Oxide Yellow, Valsartan 80 mg contains Iron Oxide Red, Valsartan 160 mg contains Iron Oxide Yellow, Iron Oxide Red and Valsartan 320 mg contains Iron Oxide Yellow, Iron Oxide Black, Iron Oxide Red."
    },
    {
      "NDCCode": "62332-048-10",
      "PackageDescription": "100 BLISTER PACK in 1 CARTON (62332-048-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK",
      "NDC11Code": "62332-0048-10",
      "ProductNDC": "62332-048",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091617",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "50; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-01-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Losartan potassium and hydrochlorothiazide tablets are a combination of losartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide, a diuretic indicated for:. ·        Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). ·        Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2).",
      "Description": "Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg combine an angiotensin II receptor blocker acting on the AT1 receptor subtype and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan potassium and hydrochlorothiazide tablets USP are available for oral administration in three tablet combinations of losartan USP and hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and titanium dioxide. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg and 100 mg/25 mg also contain D&C yellow No. 10 aluminum lake. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium."
    },
    {
      "NDCCode": "62332-049-10",
      "PackageDescription": "100 BLISTER PACK in 1 CARTON (62332-049-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK",
      "NDC11Code": "62332-0049-10",
      "ProductNDC": "62332-049",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091617",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "100; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-01-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Losartan potassium and hydrochlorothiazide tablets are a combination of losartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide, a diuretic indicated for:. ·        Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). ·        Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2).",
      "Description": "Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg combine an angiotensin II receptor blocker acting on the AT1 receptor subtype and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan potassium and hydrochlorothiazide tablets USP are available for oral administration in three tablet combinations of losartan USP and hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and titanium dioxide. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg and 100 mg/25 mg also contain D&C yellow No. 10 aluminum lake. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium."
    },
    {
      "NDCCode": "62332-050-10",
      "PackageDescription": "100 BLISTER PACK in 1 CARTON (62332-050-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK",
      "NDC11Code": "62332-0050-10",
      "ProductNDC": "62332-050",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "NonProprietaryName": "Losartan Potassium And Hydrochlorothiazide",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091617",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "LOSARTAN POTASSIUM; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "100; 25",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-01-05",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Losartan potassium and hydrochlorothiazide tablets are a combination of losartan, an angiotensin II receptor blocker (ARB) and hydrochlorothiazide, a diuretic indicated for:. ·        Treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and nonfatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1). ·        Reduction of the risk of stroke in patients with hypertension and left ventricular hypertrophy. There is evidence that this benefit does not apply to Black patients. (1.2).",
      "Description": "Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg combine an angiotensin II receptor blocker acting on the AT1 receptor subtype and a diuretic, hydrochlorothiazide. Losartan potassium, a non-peptide molecule, is chemically described as 2-butyl-4-chloro-1-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]imidazole-5-methanol monopotassium salt. Its empirical formula is C22H22ClKN6O, and its structural formula is. Losartan potassium, USP is a white to off-white free-flowing crystalline powder with a molecular weight of 461.01. It is freely soluble in water, soluble in alcohols, and slightly soluble in common organic solvents, such as acetonitrile and methyl ethyl ketone. Oxidation of the 5-hydroxymethyl group on the imidazole ring results in the active metabolite of losartan. Hydrochlorothiazide is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.74, which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Losartan potassium and hydrochlorothiazide tablets USP are available for oral administration in three tablet combinations of losartan USP and hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 50 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 100 mg of losartan potassium USP and 12.5 mg of hydrochlorothiazide USP. Losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 100 mg of losartan potassium USP and 25 mg of hydrochlorothiazide USP. Inactive ingredients are hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, and titanium dioxide. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg and 100 mg/25 mg also contain D&C yellow No. 10 aluminum lake. Losartan potassium and hydrochlorothiazide tablet USP 50 mg/12.5 mg contain 4.24 mg (0.108 mEq) of potassium, losartan potassium and hydrochlorothiazide tablet USP 100 mg/12.5 mg contain 8.48 mg (0.216 mEq) of potassium, and losartan potassium and hydrochlorothiazide tablet USP 100 mg/25 mg contain 8.48 mg (0.216 mEq) of potassium."
    },
    {
      "NDCCode": "62332-051-10",
      "PackageDescription": "10 TABLET in 1 BLISTER PACK (62332-051-10) ",
      "NDC11Code": "62332-0051-10",
      "ProductNDC": "62332-051",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091370",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "IRBESARTAN; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "150; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-02-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan  or  hydrochlorothiazide (HCTZ)   monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. *For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to- treat analysis).The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures.For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone).The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).",
      "Description": "Irbesartan and hydrochlorothiazide tablets, USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide, USP (HCTZ). Irbesartan, USP is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and its structural formula is. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7  Hydrochlorothiazide, USP is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in tablets containing 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP or 300 mg of irbesartan, USP combined with 25 mg hydrochlorothiazide, USP. Inactive ingredients include: croscarmellose sodium, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate and povidone. In addition, the 300/25 mg pinkish brown film-coated tablet contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
    },
    {
      "NDCCode": "62332-052-10",
      "PackageDescription": "10 TABLET in 1 BLISTER PACK (62332-052-10) ",
      "NDC11Code": "62332-0052-10",
      "ProductNDC": "62332-052",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091370",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "IRBESARTAN; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "300; 12.5",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-02-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan  or  hydrochlorothiazide (HCTZ)   monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. *For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to- treat analysis).The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures.For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone).The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).",
      "Description": "Irbesartan and hydrochlorothiazide tablets, USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide, USP (HCTZ). Irbesartan, USP is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and its structural formula is. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7  Hydrochlorothiazide, USP is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in tablets containing 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP or 300 mg of irbesartan, USP combined with 25 mg hydrochlorothiazide, USP. Inactive ingredients include: croscarmellose sodium, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate and povidone. In addition, the 300/25 mg pinkish brown film-coated tablet contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
    },
    {
      "NDCCode": "62332-053-10",
      "PackageDescription": "10 TABLET, FILM COATED in 1 BLISTER PACK (62332-053-10) ",
      "NDC11Code": "62332-0053-10",
      "ProductNDC": "62332-053",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "NonProprietaryName": "Irbesartan And Hydrochlorothiazide",
      "DosageFormName": "TABLET, FILM COATED",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160523",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091370",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "IRBESARTAN; HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "300; 25",
      "StrengthUnit": "mg/1; mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC], Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2026-02-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160523",
      "SamplePackage": "N",
      "IndicationAndUsage": "Irbesartan and hydrochlorothiazide tablets are indicated for the treatment of hypertension. Irbesartan and hydrochlorothiazide tablets may be used in patients whose blood pressure is not adequately controlled on monotherapy. Irbesartan and hydrochlorothiazide tablets may also be used as initial therapy in patients who are likely to need multiple drugs to achieve their blood pressure goals. The choice of irbesartan and hydrochlorothiazide tablets as initial therapy for hypertension should be based on an assessment of potential benefits and risks. Patients with stage 2 (moderate or severe) hypertension are at relatively high risk for cardiovascular events (such as strokes, heart attacks, and heart failure), kidney failure, and vision problems, so prompt treatment is clinically relevant. The decision to use a combination as initial therapy should be individualized and may be shaped by considerations such as the baseline blood pressure, the target goal, and the incremental likelihood of achieving goal with a combination compared with monotherapy. Data from Studies V and VI [see Clinical Studies (14.2)] provide estimates of the probability of reaching a blood pressure goal with irbesartan and hydrochlorothiazide tablets compared to irbesartan  or  hydrochlorothiazide (HCTZ)   monotherapy. The relationship between baseline blood pressure and achievement of a SeSBP <140 or <130 mmHg or SeDBP <90 or <80 mmHg in patients treated with irbesartan and hydrochlorothiazide tablets compared to patients treated with irbesartan or HCTZ monotherapy are shown in Figures 1a through 2b. *For all probability curves, patients without blood pressure measurements at Week 7 (Study VI) and Week 8 (Study V) were counted as not reaching goal (intent-to- treat analysis).The above graphs provide a rough approximation of the likelihood of reaching a targeted blood pressure goal (e.g., Week 8 sitting systolic blood pressure ≤140 mmHg) for the treatment groups. The curve of each treatment group in each study was estimated by logistic regression modeling from all available data of that treatment group. The estimated likelihood at the right tail of each curve is less reliable due to small numbers of subjects with high baseline blood pressures.For example, a patient with a blood pressure of 180/105 mmHg has about a 25% likelihood of achieving a goal of <140 mmHg (systolic) and 50% likelihood of achieving <90 mmHg (diastolic) on irbesartan alone (and lower still likelihoods on HCTZ alone).The likelihood of achieving these goals on irbesartan and hydrochlorothiazide tablets rises to about 40% (systolic) or 70% (diastolic).",
      "Description": "Irbesartan and hydrochlorothiazide tablets, USP are a combination of an angiotensin II receptor antagonist (AT1 subtype), irbesartan, USP and a thiazide diuretic, hydrochlorothiazide, USP (HCTZ). Irbesartan, USP is a non-peptide compound, chemically described as a 2-butyl-3-[p-(o-1H-tetrazol-5-ylphenyl)benzyl]-1,3-diazaspiro [4.4]non-1-en-4-one. Its empirical formula is C25H28N6O, and its structural formula is. Irbesartan, USP is a white to off-white crystalline powder with a molecular weight of 428.5. It is a nonpolar compound with a partition coefficient (octanol/water) of 10.1 at pH of 7.4. Irbesartan, USP is slightly soluble in alcohol and methylene chloride and practically insoluble in water. Hydrochlorothiazide, USP is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1- dioxide. Its empirical formula is C7H8ClN3O4S2 and its structural formula is. Hydrochlorothiazide, USP is a white, or practically white, crystalline powder with a molecular weight of 297.7  Hydrochlorothiazide, USP is slightly soluble in water and freely soluble in sodium hydroxide solution. Irbesartan and hydrochlorothiazide tablets, USP are available for oral administration in tablets containing 150 mg or 300 mg of irbesartan, USP combined with 12.5 mg of hydrochlorothiazide, USP or 300 mg of irbesartan, USP combined with 25 mg hydrochlorothiazide, USP. Inactive ingredients include: croscarmellose sodium, iron oxide red, iron oxide yellow, lactose monohydrate, magnesium stearate and povidone. In addition, the 300/25 mg pinkish brown film-coated tablet contains hypromellose, iron oxide black, polyethylene glycol and titanium dioxide."
    },
    {
      "NDCCode": "62332-054-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-054-10) ",
      "NDC11Code": "62332-0054-10",
      "ProductNDC": "62332-054",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Clonidine Hydrochloride",
      "NonProprietaryName": "Clonidine Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160503",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091368",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "CLONIDINE HYDROCHLORIDE",
      "StrengthNumber": ".1",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-10-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160503",
      "SamplePackage": "N",
      "IndicationAndUsage": "Clonidine hydrochloride is indicated in the treatment of hypertension. Clonidine hydrochloride may be employed alone or concomitantly with other antihypertensive agents.",
      "Description": "Clonidine hydrochloride is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The inactive ingredients are lactose monohydrate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, magnesium stearate and FD&C Yellow No. 6 Aluminum Lake. Clonidine hydrochloride 0.1 mg tablets also contain FD&C Red No. 40 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula:. C9H9Cl2N3.HCl                                                                           Mol Wt. 266.56. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
    },
    {
      "NDCCode": "62332-055-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-055-10) ",
      "NDC11Code": "62332-0055-10",
      "ProductNDC": "62332-055",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Clonidine Hydrochloride",
      "NonProprietaryName": "Clonidine Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160503",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091368",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "CLONIDINE HYDROCHLORIDE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-10-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160503",
      "SamplePackage": "N",
      "IndicationAndUsage": "Clonidine hydrochloride is indicated in the treatment of hypertension. Clonidine hydrochloride may be employed alone or concomitantly with other antihypertensive agents.",
      "Description": "Clonidine hydrochloride is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The inactive ingredients are lactose monohydrate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, magnesium stearate and FD&C Yellow No. 6 Aluminum Lake. Clonidine hydrochloride 0.1 mg tablets also contain FD&C Red No. 40 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula:. C9H9Cl2N3.HCl                                                                           Mol Wt. 266.56. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
    },
    {
      "NDCCode": "62332-056-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-056-10) ",
      "NDC11Code": "62332-0056-10",
      "ProductNDC": "62332-056",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Clonidine Hydrochloride",
      "NonProprietaryName": "Clonidine Hydrochloride",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160503",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091368",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "CLONIDINE HYDROCHLORIDE",
      "StrengthNumber": ".3",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Adrenergic alpha2-Agonists [MoA], Central alpha-2 Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-10-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20160503",
      "SamplePackage": "N",
      "IndicationAndUsage": "Clonidine hydrochloride is indicated in the treatment of hypertension. Clonidine hydrochloride may be employed alone or concomitantly with other antihypertensive agents.",
      "Description": "Clonidine hydrochloride is a centrally acting alpha-agonist hypotensive agent available as tablets for oral administration in three dosage strengths: 0.1 mg, 0.2 mg and 0.3 mg. The 0.1 mg tablet is equivalent to 0.087 mg of the free base. The inactive ingredients are lactose monohydrate, microcrystalline cellulose, pregelatinized starch, sodium starch glycolate, magnesium stearate and FD&C Yellow No. 6 Aluminum Lake. Clonidine hydrochloride 0.1 mg tablets also contain FD&C Red No. 40 Aluminum Lake and FD&C Blue No. 1 Aluminum Lake. Clonidine hydrochloride is an imidazoline derivative and exists as a mesomeric compound. The chemical name is 2-(2,6-dichlorophenylamino)-2-imidazoline hydrochloride. The following is the structural formula:. C9H9Cl2N3.HCl                                                                           Mol Wt. 266.56. Clonidine hydrochloride is an odorless, bitter, white, crystalline substance soluble in water and alcohol."
    },
    {
      "NDCCode": "62332-060-10",
      "PackageDescription": "100 TABLET in 1 CARTON (62332-060-10) ",
      "NDC11Code": "62332-0060-10",
      "ProductNDC": "62332-060",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Candesartan Cilexetil",
      "NonProprietaryName": "Candesartan Cilexetil",
      "DosageFormName": "TABLET",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170621",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209119",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "CANDESARTAN CILEXETIL",
      "StrengthNumber": "32",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA], Angiotensin 2 Receptor Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2021-10-06",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170621",
      "SamplePackage": "N",
      "IndicationAndUsage": "Candesartan cilexetil tablets are an angiotensin II receptor blocker (ARB) indicated for:. ·      Treatment of hypertension in adults and children 1 to <17 years of age, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions (1.1). ·      Treatment of heart failure (NYHA class II-IV); candesartan cilexetil tablets reduces  cardiovascular  death and heart failure hospitalization (1.2).",
      "Description": "Candesartan cilexetil,  a  prodrug,  is  hydrolyzed  to  candesartan  during  absorption  from  the  gastrointestinal  tract.   Candesartan  is  a  selective  AT1  subtype  angiotensin  II  receptor  antagonist. Candesartan  cilexetil,  a  nonpeptide,  is  chemically  described  as  (±) - 1 - Hydroxyethyl  2 - ethoxy - 1 - [ p - ( o - 1 H - tetrazol - 5­ ylphenyl) benzyl] - 7 -benzimidazolecarboxylate,  cyclohexyl  carbonate  (ester). Its  empirical  formula  is  C33H34N6O6,  and  its  structural  formula  is Candesartan cilexetil, USP is a white to off-white powder with a molecular weight of 610.67. It is practically insoluble in water and sparingly soluble in methanol. Candesartan cilexetil is a racemic mixture containing one chiral center at the cyclohexyloxycarbonyloxy ethyl ester group. Following oral administration, candesartan cilexetil undergoes hydrolysis at the ester link to form the active drug, candesartan, which is achiral. Candesartan cilexetil is available for oral use as tablet containing 32 mg of candesartan cilexetil, USP and the following inactive ingredients: mannitol, pullulan, carboxymethylcellulose calcium, corn starch, polyethylene glycol, hydroxypropyl cellulose, magnesium stearate and lactose monohydrate. The 32 mg tablet contains iron oxide red as a colorant."
    },
    {
      "NDCCode": "62332-063-10",
      "PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (62332-063-10)  > 10 CAPSULE in 1 BLISTER PACK",
      "NDC11Code": "62332-0063-10",
      "ProductNDC": "62332-063",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Rivastigmine Tartrate",
      "NonProprietaryName": "Rivastigmine Tartrate",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220612",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091689",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "RIVASTIGMINE TARTRATE",
      "StrengthNumber": "1.5",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2022-06-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220612",
      "SamplePackage": "N",
      "IndicationAndUsage": "Rivastigmine tartrate capsules are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild-to-moderate dementia of the Alzheimer’s type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson’s disease (PD) (1.2).",
      "Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 g/mol (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate , equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
    },
    {
      "NDCCode": "62332-064-10",
      "PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (62332-064-10)  > 10 CAPSULE in 1 BLISTER PACK",
      "NDC11Code": "62332-0064-10",
      "ProductNDC": "62332-064",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Rivastigmine Tartrate",
      "NonProprietaryName": "Rivastigmine Tartrate",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220612",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091689",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "RIVASTIGMINE TARTRATE",
      "StrengthNumber": "3",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2022-06-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220612",
      "SamplePackage": "N",
      "IndicationAndUsage": "Rivastigmine tartrate capsules are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild-to-moderate dementia of the Alzheimer’s type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson’s disease (PD) (1.2).",
      "Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 g/mol (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate , equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
    },
    {
      "NDCCode": "62332-065-10",
      "PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (62332-065-10)  > 10 CAPSULE in 1 BLISTER PACK",
      "NDC11Code": "62332-0065-10",
      "ProductNDC": "62332-065",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Rivastigmine Tartrate",
      "NonProprietaryName": "Rivastigmine Tartrate",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220612",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091689",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "RIVASTIGMINE TARTRATE",
      "StrengthNumber": "4.5",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2022-06-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220612",
      "SamplePackage": "N",
      "IndicationAndUsage": "Rivastigmine tartrate capsules are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild-to-moderate dementia of the Alzheimer’s type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson’s disease (PD) (1.2).",
      "Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 g/mol (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate , equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
    },
    {
      "NDCCode": "62332-066-10",
      "PackageDescription": "100 BLISTER PACK in 1 BOX, UNIT-DOSE (62332-066-10)  > 10 CAPSULE in 1 BLISTER PACK",
      "NDC11Code": "62332-0066-10",
      "ProductNDC": "62332-066",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Rivastigmine Tartrate",
      "NonProprietaryName": "Rivastigmine Tartrate",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20220612",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA091689",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "RIVASTIGMINE TARTRATE",
      "StrengthNumber": "6",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2022-06-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20220612",
      "SamplePackage": "N",
      "IndicationAndUsage": "Rivastigmine tartrate capsules are an acetylcholinesterase inhibitor indicated for treatment of: : 1 Mild-to-moderate dementia of the Alzheimer’s type (AD) (1.1), 2 Mild-to-moderate dementia associated with Parkinson’s disease (PD) (1.2).",
      "Description": "Rivastigmine tartrate is a reversible cholinesterase inhibitor and is known chemically as (S)-N-Ethyl-N-methyl-3-[1-(dimethylamino)ethyl]-phenyl carbamate hydrogen-(2R,3R)-tartrate. Rivastigmine tartrate is commonly referred to in the pharmacological literature as SDZ ENA 713 or ENA 713. It has an empirical formula of C14H22N2O2 C4H6O6 (hydrogen tartrate salt – hta salt) and a molecular weight of 400.43 g/mol (hta salt). Rivastigmine tartrate is a white to off-white, fine crystalline powder that is very soluble in water, soluble in ethanol and acetonitrile, slightly soluble in n-octanol and very slightly soluble in ethyl acetate. The distribution coefficient at 37°C in n-octanol/phosphate buffer solution pH 7 is 3. Rivastigmine Tartrate Capsules USP contain rivastigmine tartrate , equivalent to 1.5 mg, 3 mg, 4.5 mg and 6 mg of rivastigmine base for oral administration. Inactive ingredients are hypromellose, magnesium stearate, microcrystalline cellulose, and colloidal silicon dioxide. Each hard-gelatin capsule contains gelatin, titanium dioxide and red and/or yellow iron oxides."
    },
    {
      "NDCCode": "62332-070-10",
      "PackageDescription": "10 BLISTER PACK in 1 CARTON (62332-070-10)  > 10 CAPSULE in 1 BLISTER PACK",
      "NDC11Code": "62332-0070-10",
      "ProductNDC": "62332-070",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Hydrochlorothiazide",
      "NonProprietaryName": "Hydrochlorothiazide",
      "DosageFormName": "CAPSULE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20170302",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA200645",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "HYDROCHLOROTHIAZIDE",
      "StrengthNumber": "12.5",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]",
      "Status": "Active",
      "LastUpdate": "2020-09-30",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20170302",
      "SamplePackage": "N",
      "IndicationAndUsage": "Hydrochlorothiazide capsules, USP  are indicated in the management of hypertension either as the sole therapeutic agent, or in combination with other antihypertensives. Unlike potassium sparing combination diuretic products, hydrochlorothiazide may be used in those patients in whom the development of hyperkalemia cannot be risked, including patients taking ACE inhibitors. Usage in Pregnancy: The routine use of diuretics in an otherwise healthy woman is inappropriate and exposes mother and fetus to unnecessary hazard. Diuretics do not prevent development of toxemia of pregnancy, and there is no satisfactory evidence that they are useful in the treatment of developed toxemia.Edema during pregnancy may arise from pathological causes or from the physiologic and mechanical consequences of pregnancy. Diuretics are indicated in pregnancy when edema is due to pathologic causes, just as they are in the absence of pregnancy. Dependent edema in pregnancy resulting from restriction of venous return by the expanded uterus is properly treated through elevation of the lower extremities and use of support hose; use of diuretics to lower intravascular volume in this case is illogical and unnecessary. There is hypervolemia during normal pregnancy which is harmful to neither the fetus nor the mother (in the absence of cardiovascular disease), but which is associated with edema, including generalized edema in the majority of pregnant women. If this edema produces discomfort, increased recumbency will often provide relief. In rare instances this edema may cause extreme discomfort which is not relieved by rest. In these cases a short course of diuretics may provide relief and may be appropriate.",
      "Description": "Hydrochlorothiazide, USP is the 3,4-dihydro derivative of chlorothiazide. Its chemical name is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. Its empirical formula is C7H8ClN3O4S2; its molecular weight is 297.74; and its structural formula is. It is a white, or practically white, crystalline powder which is slightly soluble in water, but freely soluble in sodium hydroxide solution. Hydrochlorothiazide is supplied as 12.5 mg capsules for oral use. Inactive ingredients: colloidal silicon dioxide, pregelatinized starch, lactose monohydrate, magnesium stearate. Gelatin capsules contain D&C Red # 28, D&C Yellow # 10, FD&C Blue # 1, gelatin, titanium dioxide. The capsules are printed with edible ink containing black iron oxide and pharmaceutical glaze."
    },
    {
      "NDCCode": "62332-071-01",
      "PackageDescription": "1 VIAL in 1 CARTON (62332-071-01)  / 10 mL in 1 VIAL",
      "NDC11Code": "62332-0071-01",
      "ProductNDC": "62332-071",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Pantoprazole Sodium",
      "NonProprietaryName": "Pantoprazole Sodium Injection",
      "DosageFormName": "POWDER, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20250331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA219230",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "PANTOPRAZOLE SODIUM",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-04-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20250331",
      "SamplePackage": "N",
      "IndicationAndUsage": "Pantoprazole sodium for injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.",
      "Description": "The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white or almost white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of pantoprazole sodium for injection is in the pH range of 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
    },
    {
      "NDCCode": "62332-071-10",
      "PackageDescription": "10 VIAL in 1 CARTON (62332-071-10)  / 10 mL in 1 VIAL",
      "NDC11Code": "62332-0071-10",
      "ProductNDC": "62332-071",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Pantoprazole Sodium",
      "NonProprietaryName": "Pantoprazole Sodium Injection",
      "DosageFormName": "POWDER, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20250331",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA219230",
      "LabelerName": "Alembic Pharmaceuticals Inc.",
      "SubstanceName": "PANTOPRAZOLE SODIUM",
      "StrengthNumber": "40",
      "StrengthUnit": "mg/10mL",
      "Pharm_Classes": "Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-04-10",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20250331",
      "SamplePackage": "N",
      "IndicationAndUsage": "Pantoprazole sodium for injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.",
      "Description": "The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white or almost white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of pantoprazole sodium for injection is in the pH range of 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"62332-150-10","ProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide","NonProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide"},{"NDCCode":"62332-150-08","ProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide","NonProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide"},{"NDCCode":"62332-150-30","ProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide","NonProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide"},{"NDCCode":"62332-150-90","ProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide","NonProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide"},{"NDCCode":"62332-150-91","ProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide","NonProprietaryName":"Olmesartan Medoxomil And Hydrochlorothiazide"},{"NDCCode":"62332-491-41","ProprietaryName":"Tizanidine Hydrochloride","NonProprietaryName":"Tizanidine Hydrochloride"},{"NDCCode":"62332-492-41","ProprietaryName":"Tizanidine Hydrochloride","NonProprietaryName":"Tizanidine Hydrochloride"},{"NDCCode":"62332-493-41","ProprietaryName":"Tizanidine Hydrochloride","NonProprietaryName":"Tizanidine Hydrochloride"},{"NDCCode":"62332-001-10","ProprietaryName":"Famotidine","NonProprietaryName":"Famotidine"},{"NDCCode":"62332-002-10","ProprietaryName":"Famotidine","NonProprietaryName":"Famotidine"},{"NDCCode":"62332-044-10","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"62332-045-10","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"62332-046-10","ProprietaryName":"Valsartan","NonProprietaryName":"Valsartan"},{"NDCCode":"62332-048-10","ProprietaryName":"Losartan Potassium And Hydrochlorothiazide","NonProprietaryName":"Losartan Potassium And Hydrochlorothiazide"},{"NDCCode":"62332-049-10","ProprietaryName":"Losartan Potassium And Hydrochlorothiazide","NonProprietaryName":"Losartan Potassium And Hydrochlorothiazide"},{"NDCCode":"62332-050-10","ProprietaryName":"Losartan Potassium And Hydrochlorothiazide","NonProprietaryName":"Losartan Potassium And Hydrochlorothiazide"},{"NDCCode":"62332-051-10","ProprietaryName":"Irbesartan And Hydrochlorothiazide","NonProprietaryName":"Irbesartan And Hydrochlorothiazide"},{"NDCCode":"62332-052-10","ProprietaryName":"Irbesartan And Hydrochlorothiazide","NonProprietaryName":"Irbesartan And Hydrochlorothiazide"},{"NDCCode":"62332-053-10","ProprietaryName":"Irbesartan And Hydrochlorothiazide","NonProprietaryName":"Irbesartan And Hydrochlorothiazide"},{"NDCCode":"62332-054-10","ProprietaryName":"Clonidine Hydrochloride","NonProprietaryName":"Clonidine Hydrochloride"},{"NDCCode":"62332-055-10","ProprietaryName":"Clonidine Hydrochloride","NonProprietaryName":"Clonidine Hydrochloride"},{"NDCCode":"62332-056-10","ProprietaryName":"Clonidine Hydrochloride","NonProprietaryName":"Clonidine Hydrochloride"},{"NDCCode":"62332-060-10","ProprietaryName":"Candesartan Cilexetil","NonProprietaryName":"Candesartan Cilexetil"},{"NDCCode":"62332-063-10","ProprietaryName":"Rivastigmine Tartrate","NonProprietaryName":"Rivastigmine Tartrate"},{"NDCCode":"62332-064-10","ProprietaryName":"Rivastigmine Tartrate","NonProprietaryName":"Rivastigmine Tartrate"},{"NDCCode":"62332-065-10","ProprietaryName":"Rivastigmine Tartrate","NonProprietaryName":"Rivastigmine Tartrate"},{"NDCCode":"62332-066-10","ProprietaryName":"Rivastigmine Tartrate","NonProprietaryName":"Rivastigmine Tartrate"},{"NDCCode":"62332-070-10","ProprietaryName":"Hydrochlorothiazide","NonProprietaryName":"Hydrochlorothiazide"},{"NDCCode":"62332-071-01","ProprietaryName":"Pantoprazole Sodium","NonProprietaryName":"Pantoprazole Sodium Injection"},{"NDCCode":"62332-071-10","ProprietaryName":"Pantoprazole Sodium","NonProprietaryName":"Pantoprazole Sodium Injection"}]}
                    

<NDCList><NDC><NDCCode>62332-150-10</NDCCode><ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-150-08</NDCCode><ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-150-30</NDCCode><ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-150-90</NDCCode><ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-150-91</NDCCode><ProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Olmesartan Medoxomil And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-491-41</NDCCode><ProprietaryName>Tizanidine Hydrochloride</ProprietaryName><NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-492-41</NDCCode><ProprietaryName>Tizanidine Hydrochloride</ProprietaryName><NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-493-41</NDCCode><ProprietaryName>Tizanidine Hydrochloride</ProprietaryName><NonProprietaryName>Tizanidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-001-10</NDCCode><ProprietaryName>Famotidine</ProprietaryName><NonProprietaryName>Famotidine</NonProprietaryName></NDC><NDC><NDCCode>62332-002-10</NDCCode><ProprietaryName>Famotidine</ProprietaryName><NonProprietaryName>Famotidine</NonProprietaryName></NDC><NDC><NDCCode>62332-044-10</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>62332-045-10</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>62332-046-10</NDCCode><ProprietaryName>Valsartan</ProprietaryName><NonProprietaryName>Valsartan</NonProprietaryName></NDC><NDC><NDCCode>62332-048-10</NDCCode><ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-049-10</NDCCode><ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-050-10</NDCCode><ProprietaryName>Losartan Potassium And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Losartan Potassium And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-051-10</NDCCode><ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-052-10</NDCCode><ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-053-10</NDCCode><ProprietaryName>Irbesartan And Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Irbesartan And Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-054-10</NDCCode><ProprietaryName>Clonidine Hydrochloride</ProprietaryName><NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-055-10</NDCCode><ProprietaryName>Clonidine Hydrochloride</ProprietaryName><NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-056-10</NDCCode><ProprietaryName>Clonidine Hydrochloride</ProprietaryName><NonProprietaryName>Clonidine Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>62332-060-10</NDCCode><ProprietaryName>Candesartan Cilexetil</ProprietaryName><NonProprietaryName>Candesartan Cilexetil</NonProprietaryName></NDC><NDC><NDCCode>62332-063-10</NDCCode><ProprietaryName>Rivastigmine Tartrate</ProprietaryName><NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName></NDC><NDC><NDCCode>62332-064-10</NDCCode><ProprietaryName>Rivastigmine Tartrate</ProprietaryName><NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName></NDC><NDC><NDCCode>62332-065-10</NDCCode><ProprietaryName>Rivastigmine Tartrate</ProprietaryName><NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName></NDC><NDC><NDCCode>62332-066-10</NDCCode><ProprietaryName>Rivastigmine Tartrate</ProprietaryName><NonProprietaryName>Rivastigmine Tartrate</NonProprietaryName></NDC><NDC><NDCCode>62332-070-10</NDCCode><ProprietaryName>Hydrochlorothiazide</ProprietaryName><NonProprietaryName>Hydrochlorothiazide</NonProprietaryName></NDC><NDC><NDCCode>62332-071-01</NDCCode><ProprietaryName>Pantoprazole Sodium</ProprietaryName><NonProprietaryName>Pantoprazole Sodium Injection</NonProprietaryName></NDC><NDC><NDCCode>62332-071-10</NDCCode><ProprietaryName>Pantoprazole Sodium</ProprietaryName><NonProprietaryName>Pantoprazole Sodium Injection</NonProprietaryName></NDC></NDCList>