{
"NDC": [
{
"NDCCode": "62332-183-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (62332-183-20) ",
"NDC11Code": "62332-0183-20",
"ProductNDC": "62332-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205233",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2020-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151222",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).",
"Description": "Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet)."
},
{
"NDCCode": "62332-183-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (62332-183-30) ",
"NDC11Code": "62332-0183-30",
"ProductNDC": "62332-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205233",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2020-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151222",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).",
"Description": "Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet)."
},
{
"NDCCode": "62332-183-31",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (62332-183-31) ",
"NDC11Code": "62332-0183-31",
"ProductNDC": "62332-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205233",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2020-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151222",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).",
"Description": "Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet)."
},
{
"NDCCode": "62332-183-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (62332-183-91) ",
"NDC11Code": "62332-0183-91",
"ProductNDC": "62332-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205233",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2020-09-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151222",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).",
"Description": "Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet)."
},
{
"NDCCode": "62332-075-20",
"PackageDescription": "20 TABLET, COATED in 1 BOTTLE (62332-075-20) ",
"NDC11Code": "62332-0075-20",
"ProductNDC": "62332-075",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151013",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200891",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2021-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151013",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets)."
},
{
"NDCCode": "62332-076-20",
"PackageDescription": "20 TABLET, COATED in 1 BOTTLE (62332-076-20) ",
"NDC11Code": "62332-0076-20",
"ProductNDC": "62332-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151013",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200891",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2021-10-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151013",
"SamplePackage": "N",
"IndicationAndUsage": "Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets)."
},
{
"NDCCode": "62332-353-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (62332-353-20) ",
"NDC11Code": "62332-0353-20",
"ProductNDC": "62332-353",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline Hyclate",
"NonProprietaryName": "Doxycycline Hyclate",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20200515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210536",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2026-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200515",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate tablets, USP and other antibacterial drugs, doxycycline hyclate tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Treatment:. Doxycycline is indicated for the treatment of the following infections. · Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. · Respiratory tract infections caused by Mycoplasma pneumoniae. · Lymphogranuloma venereum caused by Chlamydia trachomatis. · Psittacosis (ornithosis) caused by Chlamydophila psittaci. · Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. · Inclusion conjunctivitis caused by Chlamydia trachomatis. · Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. · Nongonococcal urethritis caused by Ureaplasma urealyticum. · Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. · Chancroid caused by Haemophilus ducreyi. · Plague due to Yersinia pestis. · Tularemia due to Francisella tularensis. · Cholera caused by Vibrio cholerae. · Campylobacter fetus infections caused by Campylobacter fetus. · Brucellosis due to Brucella species (in conjunction with streptomycin). · Bartonellosis due to Bartonella bacilliformis. · Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative bacteria, when bacteriologic testing indicates appropriate susceptibility to the drug. · Escherichia coli. · Enterobacter aerogenes. · Shigella species. · Acinetobacter species. · Respiratory tract infections caused by Haemophilus influenzae. · Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. · Upper respiratory infections caused by Streptococcus pneumoniae. · Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. · Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. · Syphilis caused by Treponema pallidum. · Yaws caused by Treponema pallidum subspecies pertenue. · Listeriosis due to Listeria monocytogenes. · Vincent’s infection caused by Fusobacterium fusiforme. · Actinomycosis caused by Actinomyces israelii. · Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.Prophylaxis:. Doxycycline is indicated for the prophylaxis of malaria due to Plasmodium falciparum in short-term travelers (<4 months) to areas with chloroquine and/or pyrimethamine-sulfadoxine resistant strains. (See DOSAGE AND ADMINISTRATION section and Information for Patients subsection of the PRECAUTIONS section.).",
"Description": "Doxycycline hyclate, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8HCl)2C2H6OH2O and the molecular weight is 1025.89. Doxycycline hyclate is a yellow to light-yellow powder which is freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates.Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form.Inert ingredients are croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, FD&C Yellow No. 6 Aluminium Lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, pregelatinized starch, and titanium dioxide. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "62332-514-20",
"PackageDescription": "1 VIAL in 1 CARTON (62332-514-20) / 20 mL in 1 VIAL",
"NDC11Code": "62332-0514-20",
"ProductNDC": "62332-514",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211574",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "20",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210211",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is."
},
{
"NDCCode": "62332-515-20",
"PackageDescription": "1 VIAL in 1 CARTON (62332-515-20) / 20 mL in 1 VIAL",
"NDC11Code": "62332-0515-20",
"ProductNDC": "62332-515",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211574",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "50",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210211",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is."
},
{
"NDCCode": "62332-516-20",
"PackageDescription": "1 VIAL in 1 CARTON (62332-516-20) / 20 mL in 1 VIAL",
"NDC11Code": "62332-0516-20",
"ProductNDC": "62332-516",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211574",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "100",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210211",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is."
},
{
"NDCCode": "62332-517-20",
"PackageDescription": "1 VIAL in 1 CARTON (62332-517-20) / 20 mL in 1 VIAL",
"NDC11Code": "62332-0517-20",
"ProductNDC": "62332-517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20210211",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211574",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "200",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-03-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210211",
"SamplePackage": "N",
"IndicationAndUsage": "Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).",
"Description": "Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is."
},
{
"NDCCode": "62332-629-10",
"PackageDescription": "10 VIAL in 1 CARTON (62332-629-10) / 20 mL in 1 VIAL (62332-629-20) ",
"NDC11Code": "62332-0629-10",
"ProductNDC": "62332-629",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20221026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214635",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221026",
"SamplePackage": "N",
"IndicationAndUsage": "In Anesthesia. Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunctto treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated. Glycopyrrolate injection is not indicated as monotherapy for the treatment of peptic ulcer because effectiveness in peptic ulcer healing has not been established.",
"Description": "Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "62332-807-20",
"PackageDescription": "1 TUBE in 1 CARTON (62332-807-20) / 20 g in 1 TUBE",
"NDC11Code": "62332-0807-20",
"ProductNDC": "62332-807",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA217804",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TRETINOIN",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2024-05-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream USP, 0.1%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.1% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure."
},
{
"NDCCode": "62332-808-20",
"PackageDescription": "1 TUBE in 1 CARTON (62332-808-20) / 20 g in 1 TUBE",
"NDC11Code": "62332-0808-20",
"ProductNDC": "62332-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20260611",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214590",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260611",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure."
},
{
"NDCCode": "62332-809-20",
"PackageDescription": "1 TUBE in 1 CARTON (62332-809-20) / 20 g in 1 TUBE",
"NDC11Code": "62332-0809-20",
"ProductNDC": "62332-809",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250816",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218399",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".25",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC], Retinoids [CS]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250816",
"SamplePackage": "N",
"IndicationAndUsage": "Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.",
"Description": "Tretinoin Cream USP, 0.025%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure."
},
{
"NDCCode": "62332-811-20",
"PackageDescription": "10 SYRINGE, GLASS in 1 CARTON (62332-811-20) / 2 mL in 1 SYRINGE, GLASS (62332-811-02) ",
"NDC11Code": "62332-0811-20",
"ProductNDC": "62332-811",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diazepam",
"NonProprietaryName": "Diazepam",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20240425",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218450",
"LabelerName": "Alembic Pharmaceuticals Inc.",
"SubstanceName": "DIAZEPAM",
"StrengthNumber": "10",
"StrengthUnit": "mg/2mL",
"Pharm_Classes": "Benzodiazepine [EPC], Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2024-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240425",
"SamplePackage": "N",
"IndicationAndUsage": "Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures. (See WARNINGS.) Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.",
"Description": "Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1- methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74 Diazepam Injection, USP is a sterile solution intended for intramuscular or intravenous administration and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative."
},
{
"NDCCode": "12634-183-57",
"PackageDescription": "20 CAPSULE in 1 BLISTER PACK (12634-183-57)",
"NDC11Code": "12634-0183-57",
"ProductNDC": "12634-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20051109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).",
"Description": "Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "12634-183-80",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (12634-183-80)",
"NDC11Code": "12634-0183-80",
"ProductNDC": "12634-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20051109",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065271",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).",
"Description": "Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2."
},
{
"NDCCode": "45802-183-02",
"PackageDescription": "1 TUBE in 1 CARTON (45802-183-02) > 20 g in 1 TUBE",
"NDC11Code": "45802-0183-02",
"ProductNDC": "45802-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tretinoin",
"NonProprietaryName": "Tretinoin",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20051201",
"EndMarketingDate": "20151231",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA017340",
"LabelerName": "Perrigo New York Inc",
"SubstanceName": "TRETINOIN",
"StrengthNumber": ".1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Retinoid [EPC],Retinoids [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-01-01"
},
{
"NDCCode": "46708-183-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (46708-183-20) ",
"NDC11Code": "46708-0183-20",
"ProductNDC": "46708-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Linezolid",
"NonProprietaryName": "Linezolid",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205233",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LINEZOLID",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]",
"Status": "Active",
"LastUpdate": "2023-02-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20151222",
"SamplePackage": "N",
"IndicationAndUsage": "Linezolid tablets are indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Linezolid tablets are not indicated for the treatment of Gram-negative infections. It is critical that specific Gram-negative therapy be initiated immediately if a concomitant Gram-negative pathogen is documented or suspected [see Warnings and Precautions (5.4)].",
"Description": "Linezolid tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet)."
},
{
"NDCCode": "56136-183-01",
"PackageDescription": "20 PATCH in 1 PACKAGE (56136-183-01) / .0265 g in 1 PATCH",
"NDC11Code": "56136-0183-01",
"ProductNDC": "56136-183",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "My Beauty Spot Acne Buster",
"NonProprietaryName": "Salicylic Acid 0.5%",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240320",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "Ganzhou Olivee Cosmetic Co., Ltd.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": ".5",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240320",
"SamplePackage": "N",
"IndicationAndUsage": "soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing."
},
{
"NDCCode": "56136-183-02",
"PackageDescription": "20 PATCH in 1 PACKAGE (56136-183-02) / .0185 g in 1 PATCH",
"NDC11Code": "56136-0183-02",
"ProductNDC": "56136-183",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "My Beauty Spot Acne Buster",
"NonProprietaryName": "Salicylic Acid 0.5%",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240320",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "Ganzhou Olivee Cosmetic Co., Ltd.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": ".5",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240320",
"SamplePackage": "N",
"IndicationAndUsage": "soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing."
},
{
"NDCCode": "56136-183-03",
"PackageDescription": "20 PATCH in 1 PACKAGE (56136-183-03) / .0238 g in 1 PATCH",
"NDC11Code": "56136-0183-03",
"ProductNDC": "56136-183",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "My Beauty Spot Acne Buster",
"NonProprietaryName": "Salicylic Acid 0.5%",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20240320",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M006",
"LabelerName": "Ganzhou Olivee Cosmetic Co., Ltd.",
"SubstanceName": "SALICYLIC ACID",
"StrengthNumber": ".5",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2024-03-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240320",
"SamplePackage": "N",
"IndicationAndUsage": "soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing."
},
{
"NDCCode": "58411-183-20",
"PackageDescription": "1 CONTAINER in 1 CARTON (58411-183-20) > 10 g in 1 CONTAINER",
"NDC11Code": "58411-0183-20",
"ProductNDC": "58411-183",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Shiseido The Makeup Foundation",
"ProprietaryNameSuffix": "I20",
"NonProprietaryName": "Titanium Dioxide",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140601",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "SHISEIDO AMERICAS CORPORATION",
"SubstanceName": "TITANIUM DIOXIDE",
"StrengthNumber": "410",
"StrengthUnit": "mg/10g",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20140601",
"SamplePackage": "N"
},
{
"NDCCode": "64220-183-07",
"PackageDescription": "20 kg in 1 DRUM (64220-183-07) ",
"NDC11Code": "64220-0183-07",
"ProductNDC": "64220-183",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Amlodipine Besylate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210501",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.",
"SubstanceName": "AMLODIPINE BESYLATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2021-06-10",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "01-MAY-21"
},
{
"NDCCode": "67253-183-20",
"PackageDescription": "200 mL in 1 BOTTLE, PLASTIC (67253-183-20) ",
"NDC11Code": "67253-0183-20",
"ProductNDC": "67253-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ampicillin",
"NonProprietaryName": "Ampicillin",
"DosageFormName": "SUSPENSION",
"RouteName": "ORAL",
"StartMarketingDate": "19890210",
"EndMarketingDate": "20200831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062982",
"LabelerName": "Par Pharmaceutical",
"SubstanceName": "AMPICILLIN TRIHYDRATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "19890210",
"EndMarketingDatePackage": "20200831",
"SamplePackage": "N"
},
{
"NDCCode": "67457-183-20",
"PackageDescription": "10 VIAL, SINGLE-USE in 1 CARTON (67457-183-20) > 20 mL in 1 VIAL, SINGLE-USE (67457-183-99)",
"NDC11Code": "67457-0183-20",
"ProductNDC": "67457-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Etomidate",
"NonProprietaryName": "Etomidate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20130426",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091297",
"LabelerName": "Mylan Institutional LLC",
"SubstanceName": "ETOMIDATE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "General Anesthesia [PE],General Anesthetic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "71288-183-50",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (71288-183-50) / 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "71288-0183-50",
"ProductNDC": "71288-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Paclitaxel Protein-bound Particles For Injectable Suspension (albumin-bound)",
"NonProprietaryName": "Paclitaxel",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA216355",
"LabelerName": "Meitheal Pharmaceuticals Inc.",
"SubstanceName": "PACLITAXEL",
"StrengthNumber": "100",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-05-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250515",
"SamplePackage": "N",
"IndicationAndUsage": "Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is a microtubule inhibitor indicated for the treatment of: 1 Metastatic breast cancer, after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. (1.1), 2 Locally advanced or metastatic non-small cell lung cancer (NSCLC), as first-line treatment in combination with carboplatin, in patients who are not candidates for curative surgery or radiation therapy. (1.2), 3 Metastatic adenocarcinoma of the pancreas as first-line treatment, in combination with gemcitabine. (1.3).",
"Description": "Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is paclitaxel formulated as albumin-bound nanoparticles with a mean particle size of approximately 130 nanometers. Paclitaxel exists in the particles in a non-crystalline, amorphous state. Paclitaxel is a microtubule inhibitor. The chemical name for paclitaxel is 5β,20-Epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4,10-diacetate 2-benzoate 13-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. The empirical formula is C47H51NO14 and the molecular weight is 853.91. Paclitaxel has the following structural formula. Paclitaxel is a white to off-white crystalline powder. It is highly lipophilic, insoluble in water, and melts at approximately 216°C to 217°C. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is supplied as a white to yellow, sterile, lyophilized powder for reconstitution with 20 mL of 0.9% Sodium Chloride Injection, USP prior to intravenous infusion. Each single‑dose vial contains 100 mg of paclitaxel (bound to human albumin) and approximately 900 mg of human albumin (containing sodium caprylate and sodium acetyltryptophanate). Each milliliter (mL) of reconstituted suspension contains 5 mg paclitaxel formulated as albumin‑bound particles. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is free of solvents."
},
{
"NDCCode": "76420-183-20",
"PackageDescription": "20 CAPSULE in 1 BOTTLE (76420-183-20) ",
"NDC11Code": "76420-0183-20",
"ProductNDC": "76420-183",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dicloxacillin Sodium",
"NonProprietaryName": "Dicloxacillin Sodium",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19900930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062286",
"LabelerName": "Asclemed USA, Inc.",
"SubstanceName": "DICLOXACILLIN SODIUM",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2020-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201114",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of dicloxacillin sodium capsules and other antibacterial drugs, dicloxacillin sodium capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Dicloxacillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organisms and their sensitivity to the drug (see CLINICAL PHARMACOLOGY – Susceptibility Plate Testing) . Dicloxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of laboratory test results. The penicillinase-resistant penicillins should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant staphylococcus, therapy should not be continued with a penicillinase-resistant penicillin.",
"Description": "Dicloxacillin sodium, USP is a semisynthetic antibiotic substance which resists destruction by the enzyme penicillinase (beta - lactamase). It is monosodium (2 S,5 R,6 R)-6-[3-(2,6-dichlorophenyl)-5-methyl-4-isoxazolecarboxamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. Dicloxacillin is administered orally via capsule form or powder for reconstitution. Structurally, dicloxacillin sodium, USP may be represented as follows. C 19H 16Cl 2N 3NaO 5 S·H 2O MW 510.32."
},
{
"NDCCode": "79903-183-20",
"PackageDescription": "566 g in 1 BOTTLE, PLASTIC (79903-183-20) ",
"NDC11Code": "79903-0183-20",
"ProductNDC": "79903-183",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Petroleum Jelly",
"NonProprietaryName": "White Petrolatum",
"DosageFormName": "JELLY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Walmart INC",
"SubstanceName": "WHITE PETROLATUM",
"StrengthNumber": "100",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2026-05-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230501",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily protects minor: 1 cuts, 2 scrapes, 3 burns, 4 temporarily protects and helps relieve chapped or cracked skin and lips., 5 helps protect from the drying effects of wind and cold weather."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62332-183-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (62332-183-20) </PackageDescription>
<NDC11Code>62332-0183-20</NDC11Code>
<ProductNDC>62332-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).</IndicationAndUsage>
<Description>Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet).</Description>
</NDC>
<NDC>
<NDCCode>62332-183-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62332-183-30) </PackageDescription>
<NDC11Code>62332-0183-30</NDC11Code>
<ProductNDC>62332-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).</IndicationAndUsage>
<Description>Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet).</Description>
</NDC>
<NDC>
<NDCCode>62332-183-31</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (62332-183-31) </PackageDescription>
<NDC11Code>62332-0183-31</NDC11Code>
<ProductNDC>62332-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).</IndicationAndUsage>
<Description>Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet).</Description>
</NDC>
<NDC>
<NDCCode>62332-183-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (62332-183-91) </PackageDescription>
<NDC11Code>62332-0183-91</NDC11Code>
<ProductNDC>62332-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-09-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are an oxazolidinone-class antibacterial indicated in adults and children for the treatment of the following infections caused by susceptible Gram-positive bacteria: Nosocomial pneumonia (1.1); Community-acquired pneumonia (1.2); Complicated skin and skin structure infections, including diabetic foot infections, without concomitant osteomyelitis (1.3); Uncomplicated skin and skin structure infections (1.4); Vancomycin-resistant Enterococcus faecium infections. (1.5) Limitations of Use (1.6): Linezolid tablets are not indicated for the treatment of Gram-negative infections. The safety and efficacy of ¬linezolid tablets formulations given for longer than 28 days have not been evaluated in controlled clinical trials.To reduce the development of drug-resistant bacteria and maintain the effectiveness of linezolid tablets and other antibacterial drugs, linezolid tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by bacteria. (1.7).</IndicationAndUsage>
<Description>Linezolid Tablets, contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide.The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below. Linezolid Tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet).</Description>
</NDC>
<NDC>
<NDCCode>62332-075-20</NDCCode>
<PackageDescription>20 TABLET, COATED in 1 BOTTLE (62332-075-20) </PackageDescription>
<NDC11Code>62332-0075-20</NDC11Code>
<ProductNDC>62332-075</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151013</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200891</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>62332-076-20</NDCCode>
<PackageDescription>20 TABLET, COATED in 1 BOTTLE (62332-076-20) </PackageDescription>
<NDC11Code>62332-0076-20</NDC11Code>
<ProductNDC>62332-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151013</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200891</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>N-methyl-D-aspartate Receptor Antagonist [EPC], NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151013</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Memantine hydrochloride is indiacted for the treatment of moderate to severe dementia of the Alzheimer's type.</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine hydrochloride occurs as a fine white to off-white powder and is soluble in methanol and sparingly soluble in water. Memantine hydrochloride is available as tablets. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride. The tablets also contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, macrogol/polyethylene glycol 400, FD&C yellow #6 aluminum lake and FD&C blue #2 aluminum lake (5 mg tablets), and hypromellose, titanium dioxide, macrogol/polyethylene glycol 400 and iron oxide black (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>62332-353-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (62332-353-20) </PackageDescription>
<NDC11Code>62332-0353-20</NDC11Code>
<ProductNDC>62332-353</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline Hyclate</ProprietaryName>
<NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210536</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate tablets, USP and other antibacterial drugs, doxycycline hyclate tablets, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.Treatment:. Doxycycline is indicated for the treatment of the following infections. · Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. · Respiratory tract infections caused by Mycoplasma pneumoniae. · Lymphogranuloma venereum caused by Chlamydia trachomatis. · Psittacosis (ornithosis) caused by Chlamydophila psittaci. · Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated, as judged by immunofluorescence. · Inclusion conjunctivitis caused by Chlamydia trachomatis. · Uncomplicated urethral, endocervical, or rectal infections in adults caused by Chlamydia trachomatis. · Nongonococcal urethritis caused by Ureaplasma urealyticum. · Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. · Chancroid caused by Haemophilus ducreyi. · Plague due to Yersinia pestis. · Tularemia due to Francisella tularensis. · Cholera caused by Vibrio cholerae. · Campylobacter fetus infections caused by Campylobacter fetus. · Brucellosis due to Brucella species (in conjunction with streptomycin). · Bartonellosis due to Bartonella bacilliformis. · Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative bacteria, when bacteriologic testing indicates appropriate susceptibility to the drug. · Escherichia coli. · Enterobacter aerogenes. · Shigella species. · Acinetobacter species. · Respiratory tract infections caused by Haemophilus influenzae. · Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline is indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. · Upper respiratory infections caused by Streptococcus pneumoniae. · Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. · Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. · Syphilis caused by Treponema pallidum. · Yaws caused by Treponema pallidum subspecies pertenue. · Listeriosis due to Listeria monocytogenes. · Vincent’s infection caused by Fusobacterium fusiforme. · Actinomycosis caused by Actinomyces israelii. · Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.Prophylaxis:. Doxycycline is indicated for the prophylaxis of malaria due to Plasmodium falciparum in short-term travelers (<4 months) to areas with chloroquine and/or pyrimethamine-sulfadoxine resistant strains. (See DOSAGE AND ADMINISTRATION section and Information for Patients subsection of the PRECAUTIONS section.).</IndicationAndUsage>
<Description>Doxycycline hyclate, USP is an antibacterial drug synthetically derived from oxytetracycline. The structural formula of doxycycline monohydrate is. with a molecular formula of C22H24N2O8H2O and a molecular weight of 462.46. The chemical designation for doxycycline is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrate. The molecular formula for doxycycline hydrochloride hemiethanolate hemihydrate is (C22H24N2O8HCl)2C2H6OH2O and the molecular weight is 1025.89. Doxycycline hyclate is a yellow to light-yellow powder which is freely soluble in water and in methanol; sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solutions of alkali hydroxides and carbonates.Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form.Inert ingredients are croscarmellose sodium, FD&C Blue No. 2 Aluminium Lake, FD&C Yellow No. 6 Aluminium Lake, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 6000, pregelatinized starch, and titanium dioxide. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>62332-514-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (62332-514-20) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>62332-0514-20</NDC11Code>
<ProductNDC>62332-514</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211574</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is.</Description>
</NDC>
<NDC>
<NDCCode>62332-515-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (62332-515-20) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>62332-0515-20</NDC11Code>
<ProductNDC>62332-515</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211574</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is.</Description>
</NDC>
<NDC>
<NDCCode>62332-516-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (62332-516-20) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>62332-0516-20</NDC11Code>
<ProductNDC>62332-516</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211574</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is.</Description>
</NDC>
<NDC>
<NDCCode>62332-517-20</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (62332-517-20) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>62332-0517-20</NDC11Code>
<ProductNDC>62332-517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20210211</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211574</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210211</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treprostinil injection is a prostacyclin mimetic indicated for: Treatment of pulmonary arterial hypertension (PAH; WHO Group 1) to diminish symptoms associated with exercise. Studies establishing effectiveness included patients with NYHA Functional Class II-IV symptoms and etiologies of idiopathic or heritable PAH (58%), PAH associated with congenital systemic-to-pulmonary shunts (23%), or PAH associated with connective tissue diseases (19%). (1.1) Patients who require transition from epoprostenol, to reduce the rate of clinical deterioration. The risks and benefits of each drug should be carefully considered prior to transition. (1.2).</IndicationAndUsage>
<Description>Treprostinil injection is a sterile solution of treprostinil, a prostacyclin mimetic, formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20-mL multi-dose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contain 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2.Treprostinil is chemically stable at room temperature and neutral pH.Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1-Hbenz[f]inden-5-yl]oxy]acetic acid. Treprostinil has a molecular weight of 390.52 and a molecular formula of C23H34O5. The structural formula of treprostinil is.</Description>
</NDC>
<NDC>
<NDCCode>62332-629-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (62332-629-10) / 20 mL in 1 VIAL (62332-629-20) </PackageDescription>
<NDC11Code>62332-0629-10</NDC11Code>
<ProductNDC>62332-629</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20221026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214635</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>In Anesthesia. Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunctto treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated. Glycopyrrolate injection is not indicated as monotherapy for the treatment of peptic ulcer because effectiveness in peptic ulcer healing has not been established.</IndicationAndUsage>
<Description>Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3 MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>62332-807-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (62332-807-20) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>62332-0807-20</NDC11Code>
<ProductNDC>62332-807</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA217804</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream USP, 0.1%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.1% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62332-808-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (62332-808-20) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>62332-0808-20</NDC11Code>
<ProductNDC>62332-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20260611</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214590</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260611</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream USP, 0.05%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.05% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62332-809-20</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (62332-809-20) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>62332-0809-20</NDC11Code>
<ProductNDC>62332-809</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250816</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218399</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC], Retinoids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250816</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tretinoin Cream is indicated for topical application in the treatment of acne vulgaris. The safety and efficacy of the long-term use of this product in the treatment of other disorders have not been established.</IndicationAndUsage>
<Description>Tretinoin Cream USP, 0.025%, containing tretinoin USP, is used for the topical treatment of acne vulgaris. Tretinoin Cream contains tretinoin USP in 0.025% by weight, in a hydrophilic cream vehicle of stearic acid, isopropyl myristate, polyoxyl 40 stearate, stearyl alcohol, xanthan gum, sorbic acid, butylated hydroxytoluene, and purified water. Chemically, tretinoin is all-trans-retinoic acid and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62332-811-20</NDCCode>
<PackageDescription>10 SYRINGE, GLASS in 1 CARTON (62332-811-20) / 2 mL in 1 SYRINGE, GLASS (62332-811-02) </PackageDescription>
<NDC11Code>62332-0811-20</NDC11Code>
<ProductNDC>62332-811</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diazepam</ProprietaryName>
<NonProprietaryName>Diazepam</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20240425</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218450</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DIAZEPAM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/2mL</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2024-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diazepam is indicated for the management of anxiety disorders or for the short-term relief of the symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. In acute alcohol withdrawal, diazepam may be useful in the symptomatic relief of acute agitation, tremor, impending or acute delirium tremens and hallucinosis. As an adjunct prior to endoscopic procedures if apprehension, anxiety or acute stress reactions are present, and to diminish the patient's recall of the procedures. (See WARNINGS.) Diazepam is a useful adjunct for the relief of skeletal muscle spasm due to reflex spasm to local pathology (such as inflammation of the muscles or joints, or secondary to trauma); spasticity caused by upper motor neuron disorders (such as cerebral palsy and paraplegia); athetosis; stiff-man syndrome; and tetanus. Diazepam injection is a useful adjunct in status epilepticus. Diazepam is a useful premedication (the intramuscular route is preferred) for relief of anxiety and tension in patients who are to undergo surgical procedures. Intravenously, prior to cardioversion for the relief of anxiety and tension and to diminish the patient's recall of the procedure.</IndicationAndUsage>
<Description>Diazepam is a benzodiazepine derivative. Chemically, diazepam is 7-chloro-1,3-dihydro-1- methyl-5-phenyl-2H-1,4-benzodiazepin-2-one. It is a colorless crystalline compound, insoluble in water, with a molecular weight of 284.74 and with the following molecular structure. M.W. 284.74 Diazepam Injection, USP is a sterile solution intended for intramuscular or intravenous administration and each mL contains 5 mg diazepam compounded with 40% propylene glycol, 10% alcohol, 5% sodium benzoate and benzoic acid as buffers, and 1.5% benzyl alcohol as preservative.</Description>
</NDC>
<NDC>
<NDCCode>12634-183-57</NDCCode>
<PackageDescription>20 CAPSULE in 1 BLISTER PACK (12634-183-57)</PackageDescription>
<NDC11Code>12634-0183-57</NDC11Code>
<ProductNDC>12634-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).</IndicationAndUsage>
<Description>Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>12634-183-80</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (12634-183-80)</PackageDescription>
<NDC11Code>12634-0183-80</NDC11Code>
<ProductNDC>12634-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20051109</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065271</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amoxicillin capsules are a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. (1.1 – 1.4), 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5).</IndicationAndUsage>
<Description>Formulation of amoxicillin capsules, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[( R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as: The amoxicillin molecular formula is C 16H 19N 3O 5S3H 2O, and the molecular weight is 419.45. Each capsule of amoxicillin with blue cap and pink body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The body of the 250 mg capsule is imprinted with ‘A44’ in black ink. The body of the 500 mg capsule is imprinted with ‘A45’ in black ink. Inactive ingredients: D&C Red No. 28, FD&C Blue No. 1, FD&C Red No. 40, gelatin, magnesium stearate, microcrystalline cellulose, sodium lauryl sulfate, and titanium dioxide. Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>45802-183-02</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (45802-183-02) > 20 g in 1 TUBE</PackageDescription>
<NDC11Code>45802-0183-02</NDC11Code>
<ProductNDC>45802-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tretinoin</ProprietaryName>
<NonProprietaryName>Tretinoin</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20051201</StartMarketingDate>
<EndMarketingDate>20151231</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA017340</ApplicationNumber>
<LabelerName>Perrigo New York Inc</LabelerName>
<SubstanceName>TRETINOIN</SubstanceName>
<StrengthNumber>.1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Retinoid [EPC],Retinoids [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-01</LastUpdate>
</NDC>
<NDC>
<NDCCode>46708-183-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (46708-183-20) </PackageDescription>
<NDC11Code>46708-0183-20</NDC11Code>
<ProductNDC>46708-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Linezolid</ProprietaryName>
<NonProprietaryName>Linezolid</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205233</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LINEZOLID</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Oxazolidinone Antibacterial [EPC], Oxazolidinones [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-02-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151222</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Linezolid tablets are indicated for the treatment of infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Linezolid tablets are not indicated for the treatment of Gram-negative infections. It is critical that specific Gram-negative therapy be initiated immediately if a concomitant Gram-negative pathogen is documented or suspected [see Warnings and Precautions (5.4)].</IndicationAndUsage>
<Description>Linezolid tablets contain linezolid, which is a synthetic antibacterial agent of the oxazolidinone class. The chemical name for linezolid is (S)-N-[[3-[3-Fluoro-4-(4morpholinyl)phenyl]-2-oxo-5-oxazolidinyl] methyl]-acetamide. The empirical formula is C16H20FN3O4. Its molecular weight is 337.35, and its chemical structure is represented below:. Linezolid tablets for oral administration contain 600 mg linezolid as film-coated compressed tablets. Inactive ingredients are microcrystalline cellulose, hydroxypropyl cellulose, low-substituted hydroxypropyl cellulose, colloidal silicon dioxide, sodium stearyl fumarate, croscarmellose sodium, hypromellose, titanium dioxide and polyethylene glycol. The sodium (Na+) content is 2.92 mg per 600-mg tablet (0.1 mEq per tablet).</Description>
</NDC>
<NDC>
<NDCCode>56136-183-01</NDCCode>
<PackageDescription>20 PATCH in 1 PACKAGE (56136-183-01) / .0265 g in 1 PATCH</PackageDescription>
<NDC11Code>56136-0183-01</NDC11Code>
<ProductNDC>56136-183</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>My Beauty Spot Acne Buster</ProprietaryName>
<NonProprietaryName>Salicylic Acid 0.5%</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240320</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>Ganzhou Olivee Cosmetic Co., Ltd.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>56136-183-02</NDCCode>
<PackageDescription>20 PATCH in 1 PACKAGE (56136-183-02) / .0185 g in 1 PATCH</PackageDescription>
<NDC11Code>56136-0183-02</NDC11Code>
<ProductNDC>56136-183</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>My Beauty Spot Acne Buster</ProprietaryName>
<NonProprietaryName>Salicylic Acid 0.5%</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240320</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>Ganzhou Olivee Cosmetic Co., Ltd.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>56136-183-03</NDCCode>
<PackageDescription>20 PATCH in 1 PACKAGE (56136-183-03) / .0238 g in 1 PATCH</PackageDescription>
<NDC11Code>56136-0183-03</NDC11Code>
<ProductNDC>56136-183</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>My Beauty Spot Acne Buster</ProprietaryName>
<NonProprietaryName>Salicylic Acid 0.5%</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20240320</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M006</ApplicationNumber>
<LabelerName>Ganzhou Olivee Cosmetic Co., Ltd.</LabelerName>
<SubstanceName>SALICYLIC ACID</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2024-03-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>soothe and helps diminish the redness and irritation of blemished skin and absorbs excess oil for faster healing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>58411-183-20</NDCCode>
<PackageDescription>1 CONTAINER in 1 CARTON (58411-183-20) > 10 g in 1 CONTAINER</PackageDescription>
<NDC11Code>58411-0183-20</NDC11Code>
<ProductNDC>58411-183</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Shiseido The Makeup Foundation</ProprietaryName>
<ProprietaryNameSuffix>I20</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Dioxide</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>SHISEIDO AMERICAS CORPORATION</LabelerName>
<SubstanceName>TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>410</StrengthNumber>
<StrengthUnit>mg/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64220-183-07</NDCCode>
<PackageDescription>20 kg in 1 DRUM (64220-183-07) </PackageDescription>
<NDC11Code>64220-0183-07</NDC11Code>
<ProductNDC>64220-183</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Amlodipine Besylate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210501</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>ZHEJIANG HUAHAI PHARMACEUTICAL CO., LTD.</LabelerName>
<SubstanceName>AMLODIPINE BESYLATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2021-06-10</LastUpdate>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>01-MAY-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>67253-183-20</NDCCode>
<PackageDescription>200 mL in 1 BOTTLE, PLASTIC (67253-183-20) </PackageDescription>
<NDC11Code>67253-0183-20</NDC11Code>
<ProductNDC>67253-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ampicillin</ProprietaryName>
<NonProprietaryName>Ampicillin</NonProprietaryName>
<DosageFormName>SUSPENSION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19890210</StartMarketingDate>
<EndMarketingDate>20200831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062982</ApplicationNumber>
<LabelerName>Par Pharmaceutical</LabelerName>
<SubstanceName>AMPICILLIN TRIHYDRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>19890210</StartMarketingDatePackage>
<EndMarketingDatePackage>20200831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>67457-183-20</NDCCode>
<PackageDescription>10 VIAL, SINGLE-USE in 1 CARTON (67457-183-20) > 20 mL in 1 VIAL, SINGLE-USE (67457-183-99)</PackageDescription>
<NDC11Code>67457-0183-20</NDC11Code>
<ProductNDC>67457-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Etomidate</ProprietaryName>
<NonProprietaryName>Etomidate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20130426</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091297</ApplicationNumber>
<LabelerName>Mylan Institutional LLC</LabelerName>
<SubstanceName>ETOMIDATE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>71288-183-50</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (71288-183-50) / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>71288-0183-50</NDC11Code>
<ProductNDC>71288-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Paclitaxel Protein-bound Particles For Injectable Suspension (albumin-bound)</ProprietaryName>
<NonProprietaryName>Paclitaxel</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA216355</ApplicationNumber>
<LabelerName>Meitheal Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PACLITAXEL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is a microtubule inhibitor indicated for the treatment of: 1 Metastatic breast cancer, after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. (1.1), 2 Locally advanced or metastatic non-small cell lung cancer (NSCLC), as first-line treatment in combination with carboplatin, in patients who are not candidates for curative surgery or radiation therapy. (1.2), 3 Metastatic adenocarcinoma of the pancreas as first-line treatment, in combination with gemcitabine. (1.3).</IndicationAndUsage>
<Description>Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is paclitaxel formulated as albumin-bound nanoparticles with a mean particle size of approximately 130 nanometers. Paclitaxel exists in the particles in a non-crystalline, amorphous state. Paclitaxel is a microtubule inhibitor. The chemical name for paclitaxel is 5β,20-Epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4,10-diacetate 2-benzoate 13-ester with (2R,3S)-N-benzoyl-3-phenylisoserine. The empirical formula is C47H51NO14 and the molecular weight is 853.91. Paclitaxel has the following structural formula. Paclitaxel is a white to off-white crystalline powder. It is highly lipophilic, insoluble in water, and melts at approximately 216°C to 217°C. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is supplied as a white to yellow, sterile, lyophilized powder for reconstitution with 20 mL of 0.9% Sodium Chloride Injection, USP prior to intravenous infusion. Each single‑dose vial contains 100 mg of paclitaxel (bound to human albumin) and approximately 900 mg of human albumin (containing sodium caprylate and sodium acetyltryptophanate). Each milliliter (mL) of reconstituted suspension contains 5 mg paclitaxel formulated as albumin‑bound particles. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is free of solvents.</Description>
</NDC>
<NDC>
<NDCCode>76420-183-20</NDCCode>
<PackageDescription>20 CAPSULE in 1 BOTTLE (76420-183-20) </PackageDescription>
<NDC11Code>76420-0183-20</NDC11Code>
<ProductNDC>76420-183</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dicloxacillin Sodium</ProprietaryName>
<NonProprietaryName>Dicloxacillin Sodium</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19900930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062286</ApplicationNumber>
<LabelerName>Asclemed USA, Inc.</LabelerName>
<SubstanceName>DICLOXACILLIN SODIUM</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201114</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of dicloxacillin sodium capsules and other antibacterial drugs, dicloxacillin sodium capsules should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Dicloxacillin is indicated in the treatment of infections caused by penicillinase-producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organisms and their sensitivity to the drug (see CLINICAL PHARMACOLOGY – Susceptibility Plate Testing) . Dicloxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of laboratory test results. The penicillinase-resistant penicillins should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant staphylococcus, therapy should not be continued with a penicillinase-resistant penicillin.</IndicationAndUsage>
<Description>Dicloxacillin sodium, USP is a semisynthetic antibiotic substance which resists destruction by the enzyme penicillinase (beta - lactamase). It is monosodium (2 S,5 R,6 R)-6-[3-(2,6-dichlorophenyl)-5-methyl-4-isoxazolecarboxamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo [3.2.0]heptane-2-carboxylate monohydrate. Dicloxacillin is administered orally via capsule form or powder for reconstitution. Structurally, dicloxacillin sodium, USP may be represented as follows. C 19H 16Cl 2N 3NaO 5 S·H 2O MW 510.32.</Description>
</NDC>
<NDC>
<NDCCode>79903-183-20</NDCCode>
<PackageDescription>566 g in 1 BOTTLE, PLASTIC (79903-183-20) </PackageDescription>
<NDC11Code>79903-0183-20</NDC11Code>
<ProductNDC>79903-183</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Petroleum Jelly</ProprietaryName>
<NonProprietaryName>White Petrolatum</NonProprietaryName>
<DosageFormName>JELLY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Walmart INC</LabelerName>
<SubstanceName>WHITE PETROLATUM</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily protects minor: 1 cuts, 2 scrapes, 3 burns, 4 temporarily protects and helps relieve chapped or cracked skin and lips., 5 helps protect from the drying effects of wind and cold weather.</IndicationAndUsage>
</NDC>
</NDCList>