RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>62332-628-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-628-25)  / 5 mL in 1 VIAL (62332-628-05) </PackageDescription>
    <NDC11Code>62332-0628-25</NDC11Code>
    <ProductNDC>62332-628</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214635</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In Anesthesia. Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunctto treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.  Glycopyrrolate injection is not indicated as monotherapy for the treatment of peptic ulcer because effectiveness in peptic ulcer healing has not been established.</IndicationAndUsage>
    <Description>Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3                MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>43744-628-25</NDCCode>
    <PackageDescription>25 g in 1 DRUM (43744-628-25)</PackageDescription>
    <NDC11Code>43744-0628-25</NDC11Code>
    <ProductNDC>43744-628</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Monobenzone</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20121001</StartMarketingDate>
    <EndMarketingDate>20130624</EndMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>CBSCHEM LIMITED</LabelerName>
    <SubstanceName>MONOBENZONE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20130624</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>51079-628-19</NDCCode>
    <PackageDescription>25 BLISTER PACK in 1 BOX, UNIT-DOSE (51079-628-19)  &gt; 1 TABLET in 1 BLISTER PACK (51079-628-17)</PackageDescription>
    <NDC11Code>51079-0628-19</NDC11Code>
    <ProductNDC>51079-628</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxybutynin Chloride</ProprietaryName>
    <NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110520</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074625</ApplicationNumber>
    <LabelerName>UDL Laboratories, Inc.</LabelerName>
    <SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-12-19</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>62756-628-11</NDCCode>
    <PackageDescription>25 kg in 1 DRUM (62756-628-11) </PackageDescription>
    <NDC11Code>62756-0628-11</NDC11Code>
    <ProductNDC>62756-628</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20210116</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>SUN PHARMACEUTICAL INDUSTRIES, INC.</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>kg/25kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>16-JAN-21</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>71901-628-01</NDCCode>
    <PackageDescription>25 kg in 1 DRUM (71901-628-01) </PackageDescription>
    <NDC11Code>71901-0628-01</NDC11Code>
    <ProductNDC>71901-628</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Capecitabine</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20250824</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>EMNAR PHARMA PRIVATE LIMITED</LabelerName>
    <SubstanceName>CAPECITABINE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>kg/25kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-08-26</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>24-AUG-25</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>62332-071-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-071-25)  / 10 mL in 1 VIAL</PackageDescription>
    <NDC11Code>62332-0071-25</NDC11Code>
    <ProductNDC>62332-071</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Pantoprazole Sodium</ProprietaryName>
    <NonProprietaryName>Pantoprazole Sodium Injection</NonProprietaryName>
    <DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250331</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219230</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/10mL</StrengthUnit>
    <Pharm_Classes>Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250331</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Pantoprazole sodium for injection is indicated for treatment of: 1 gastroesophageal reflux disease (GERD) and a history of erosive esophagitis (EE) for up to 10 days in adults., 2 pathological hypersecretory conditions including Zollinger-Ellison (ZE) Syndrome in adults.</IndicationAndUsage>
    <Description>The active ingredient in pantoprazole sodium for injection (pantoprazole sodium), a PPI, is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F2N3NaO4S, with a molecular weight of 405.4. The structural formula is. Pantoprazole sodium is a white or almost white powder and is racemic. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium is freely soluble in water, very slightly soluble in phosphate buffer at pH 7.4, and practically insoluble in n-hexane. The reconstituted solution of pantoprazole sodium for injection is in the pH range of 9.0 to 10.5. Pantoprazole sodium for injection is supplied for intravenous administration as a sterile, freeze-dried powder in a single-dose clear glass vial fitted with a rubber stopper and crimp seal. Each vial contains 40 mg pantoprazole (equivalent to 45.1 mg of pantoprazole sodium), edetate disodium (1 mg), and sodium hydroxide to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-486-25</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (62332-486-25)  / 25 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>62332-0486-25</NDC11Code>
    <ProductNDC>62332-486</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clobetasol Propionate</ProprietaryName>
    <NonProprietaryName>Clobetasol Propionate</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20191024</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212881</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>CLOBETASOL PROPIONATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191024</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clobetasol Propionate Topical Solution USP, 0.05% is indicated for short-term topical treatment of inflammatory and pruritic manifestations of moderate to severe corticosteroid-responsive dermatoses of the scalp. Treatment beyond 2 consecutive weeks is not recommended, and the total dosage should not exceed 50 mL/week because of the potential for the drug to suppress the HPA axis. This product is not recommended for use in pediatric patients under 12 years of age.</IndicationAndUsage>
    <Description>Clobetasol Propionate Topical Solution USP, 0.05% contains the active compound clobetasol propionate, a synthetic corticosteroid, for topical dermatologic use. Clobetasol, an analog of prednisolone, has a high degree of glucocorticoid activity and a slight degree of mineralocorticoid activity. Chemically, clobetasol propionate is (11β,16β)-21-chloro-9-fluoro-11-hydroxy-16-methyl-17-(1-oxopropoxy) pregna-1,4-diene-3,20-dione, and it has the following structural formula. Clobetasol propionate has the molecular formula C25H32CIFO5 and a molecular weight of 467. It is a white to cream-colored crystalline powder insoluble in water. Clobetasol Propionate Topical Solution USP, 0.05% contains clobetasol propionate 0.5 mg/g in a base of carbopol 974P, isopropyl alcohol (39.3% w/w), purified water, and sodium hydroxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-507-25</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (62332-507-25)  / 2.5 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>62332-0507-25</NDC11Code>
    <ProductNDC>62332-507</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bimatoprost</ProprietaryName>
    <NonProprietaryName>Bimatoprost</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20190412</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210263</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>BIMATOPROST</SubstanceName>
    <StrengthNumber>.3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190412</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bimatoprost ophthalmic solution, 0.03% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.</IndicationAndUsage>
    <Description>Bimatoprost ophthalmic solution, 0.03% is a synthetic prostamide analog with ocular hypotensive activity. Its chemical name is (Z)-7-[(1R,2R,3R,5S)-3,5-Dihydroxy-2-[(1E,3S)-3-hydroxy-5-phenyl-1- pentenyl]cyclopentyl]-5-N-ethylheptenamide, and its molecular weight is 415.58. Its molecular formula is C25H37NO4. Its chemical structure is. Bimatoprost is a powder, soluble in methanol and alcohol. Bimatoprost ophthalmic solution, 0.03% is a clear, isotonic, colorless, sterile ophthalmic solution with an osmolality of approximately 290 mOsmol/kg. Bimatoprost ophthalmic solution, 0.03% contains Active: bimatoprost 0.3 mg/mL; Inactives: benzalkonium chloride 0.05 mg/mL; disodium hydrogen phosphate heptahydrate, citric acid monohydrate, sodium chloride and water for injection. Sodium hydroxide and/or hydrochloric acid may be added to adjust pH. The pH during its shelf life ranges from 6.8 to 7.8.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-510-25</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (62332-510-25)  &gt; 2.5 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>62332-0510-25</NDC11Code>
    <ProductNDC>62332-510</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Travoprost Ophthalmic Solution Usp, 0.004%</ProprietaryName>
    <ProprietaryNameSuffix>Travoprost</ProprietaryNameSuffix>
    <NonProprietaryName>Travoprost Ophthalmic Solution Usp, 0.004%</NonProprietaryName>
    <DosageFormName>SOLUTION/ DROPS</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20191220</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA210458</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TRAVOPROST</SubstanceName>
    <StrengthNumber>.04</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-07-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20191220</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Travoprost Ophthalmic Solution USP, 0.004% is indicated for the reduction of elevated intraocular pressure in patients with open angle glaucoma or ocular hypertension.</IndicationAndUsage>
    <Description>Travoprost is a synthetic prostaglandin F analogue. Its chemical name is [1R-[1α(Z),2β(1E,3R*),3α,5α]]-7-[3,5Dihydroxy-2-[3-hydroxy-4-[3(trifluoromethyl)phenoxy]-1-butenyl]cyclopentyl]-5heptenoic acid, 1-methylethylester. It has a molecular formula of C26H35F3O6 and a molecular weight of 500.55. The chemical structure of travoprost is. Travoprost is a clear, colorless and viscous oil that is very soluble in acetonitrile, methanol, octanol, and chloroform. It is practically insoluble in water. Travoprost Ophthalmic Solution 0.004% is supplied as sterile, buffered aqueous solution of travoprost with a pH of approximately 6.0 and an osmolality of approximately 290 mOsmol/kg. Travoprost ophthalmic solution contains Active: travoprost 0.04 mg/mL; Preservative: benzalkonium chloride 0.015% w/v; Inactives: polyoxyl 40 hydrogenated castor oil, tromethamine, boric acid, mannitol, edetate disodium, sodium hydroxide and/or hydrochloric acid (to adjust pH)and water for injection.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-525-25</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (62332-525-25)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>62332-0525-25</NDC11Code>
    <ProductNDC>62332-525</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxorubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Doxorubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, LIPOSOMAL</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250627</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219199</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXORUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-23</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250627</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxorubicin hydrochloride liposome injection is an anthracycline topoisomerase inhibitor indicated for: 1 Ovarian cancer: After failure of platinum-based chemotherapy (1.1), 2 AIDS-related Kaposi’s Sarcoma: After failure of prior systemic chemotherapy or intolerance to such therapy (1.2), 3  Multiple Myeloma: In combination with bortezomib in patients who have not previously received bortezomib and have received at least one prior therapy (1.3).</IndicationAndUsage>
    <Description>The active ingredient in Doxorubicin hydrochloride liposome injection is doxorubicin hydrochloride, an anthracycline topoisomerase inhibitor, that is encapsulated in pegylated liposomes for intravenous use. The chemical name of doxorubicin hydrochloride is (8S,10S)-10-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-8-glycolyl-7,8,9,10-tetrahydro-6,8,11-trihydroxy-1-methoxy-5,12-naphthacenedione hydrochloride. The molecular formula is C27H29NO11HCl and the molecular weight is 579.99. The structural formula is. Doxorubicin hydrochloride liposome injection is a sterile, translucent, red liposomal dispersion. Each single-dose vial contains 20 mg or 50 mg doxorubicin hydrochloride at a concentration of 2  mg/mL (equivalent to 1.87 mg/mL of doxorubicin). The pegylated liposome carriers are composed of cholesterol, 3.19 mg/mL; fully hydrogenated soy phosphatidylcholine (HSPC), 9.58 mg/mL; and N-(carbonyl-methoxypolyethylene glycol 2000)-1,2-distearoyl-sn-glycero-3-phosphoethanolamine sodium salt (MPEG-DSPE), 3.19 mg/mL. Each mL also contains ammonium sulfate, approximately 0.6 mg; histidine, 1.55 mg as a buffer; hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (6.0 to 7.0); and sucrose, 94 mg to maintain isotonicity. Greater than 90% of the drug is encapsulated in the pegylated liposomes. MPEG-DSPE has the following structural formula. HSPC has the following structural formula. Representation of a pegylated liposome.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-599-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-599-25)  / 1 mL in 1 VIAL (62332-599-01) </PackageDescription>
    <NDC11Code>62332-0599-25</NDC11Code>
    <ProductNDC>62332-599</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214456</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>15</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult PatientsKetorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
    <Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl- 2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3- propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear, colorless to slight yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-600-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-600-25)  / 1 mL in 1 VIAL (62332-600-01) </PackageDescription>
    <NDC11Code>62332-0600-25</NDC11Code>
    <ProductNDC>62332-600</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214456</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult PatientsKetorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
    <Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl- 2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3- propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear, colorless to slight yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-601-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-601-25)  / 2 mL in 1 VIAL (62332-601-02) </PackageDescription>
    <NDC11Code>62332-0601-25</NDC11Code>
    <ProductNDC>62332-601</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
    <NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214456</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
    <StrengthNumber>60</StrengthNumber>
    <StrengthUnit>mg/2mL</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).Acute Pain in Adult PatientsKetorolac tromethamine is indicated for the short-term (≤5 days) management of moderately severe acute pain that requires analgesia at the opioid level, usually in a postoperative setting. Therapy should always be initiated with intravenous or intramuscular dosing of ketorolac tromethamine, and oral ketorolac tromethamine is to be used only as continuation treatment, if necessary. The total combined duration of use of ketorolac tromethamine injection and oral ketorolac tromethamine is not to exceed 5 days of use because of the potential of increasing the frequency and severity of adverse reactions associated with the recommended doses (see WARNINGS, PRECAUTIONS, DOSAGE AND ADMINISTRATION, and ADVERSE REACTIONS). Patients should be switched to alternative analgesics as soon as possible, but ketorolac tromethamine therapy is not to exceed 5 days.</IndicationAndUsage>
    <Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl- 2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3- propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear, colorless to slight yellow in color.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-607-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-607-25)  / 1 mL in 1 VIAL (62332-607-01) </PackageDescription>
    <NDC11Code>62332-0607-25</NDC11Code>
    <ProductNDC>62332-607</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214635</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In Anesthesia. Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunctto treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.  Glycopyrrolate injection is not indicated as monotherapy for the treatment of peptic ulcer because effectiveness in peptic ulcer healing has not been established.</IndicationAndUsage>
    <Description>Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3                MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-627-25</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (62332-627-25)  / 2 mL in 1 VIAL (62332-627-02) </PackageDescription>
    <NDC11Code>62332-0627-25</NDC11Code>
    <ProductNDC>62332-627</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Glycopyrrolate</ProprietaryName>
    <NonProprietaryName>Glycopyrrolate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20221026</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA214635</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>GLYCOPYRROLATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20221026</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>In Anesthesia. Glycopyrrolate injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, glycopyrrolate injection may be used intraoperatively to counteract surgically or drug-induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. In Peptic Ulcer. For use in adults to reduce symptoms of a peptic ulcer as an adjunctto treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.  Glycopyrrolate injection is not indicated as monotherapy for the treatment of peptic ulcer because effectiveness in peptic ulcer healing has not been established.</IndicationAndUsage>
    <Description>Glycopyrrolate injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, USP 0.2 mg Water for Injection, USP q.s. Benzyl Alcohol, NF 0.9% (preservative) pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide. For Intramuscular (IM) or Intravenous (IV) administration. Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide. The molecular formula is C19H28BrNO3 and the molecular weight is 398.33. Its structural formula is as follows. C19H28BrNO3                MW 398.33. Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate injection, USP, is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol/water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-690-50</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (62332-690-50)  / 2 mL in 1 VIAL, MULTI-DOSE (62332-690-02) </PackageDescription>
    <NDC11Code>62332-0690-50</NDC11Code>
    <ProductNDC>62332-690</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxercalciferol</ProprietaryName>
    <NonProprietaryName>Doxercalciferol</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20230615</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA215810</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>DOXERCALCIFEROL</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>ug/2mL</StrengthUnit>
    <Pharm_Classes>Ergocalciferols [CS], Vitamin D2 Analog [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230615</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxercalciferol Injection is indicated for the treatment of secondary hyperparathyroidism in adult patients with CKD on dialysis.</IndicationAndUsage>
    <Description>Doxercalciferol injection contains doxercalciferol, which is a synthetic vitamin D2 analog. Doxercalciferol undergoes metabolic activation in vivo to form 1α,25-dihydroxyvitamin D2 (1α,25-(OH)2D2), a naturally occurring, biologically active form of vitamin D2.Doxercalciferol is a white to off-white crystallized powder with a calculated molecular weight of 412.66 and a molecular formula of C28H44O2. It is soluble in oils and organic solvents, but is relatively insoluble in water. Chemically, doxercalciferol is (1α,3β,5Z,7E,22E)-9,10-secoergosta-5,7,10(19),22-tetraene-1,3-diol. The structural formula is. Injection. Doxercalciferol Injection is a sterile, clear, and colorless solution. Doxercalciferol Injection 2 mL multiple-dose vials contain 4 mcg/2 mL (2 mcg/mL) of doxercalciferol. Each milliliter (mL) of solution contains 2 mcg doxercalciferol and the following inactive ingredients: butylated hydroxytoluene (0.02 mg); disodium edetate (1.1 mg); dehydrated alcohol (7.5% v/v); polysorbate 20 (10 mg); sodium chloride (1.5 mg); dibasic sodium phosphate, heptahydrate (14.4 mg); and monobasic sodium phosphate, monohydrate (1.8 mg).</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-812-25</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (62332-812-25)  / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>62332-0812-25</NDC11Code>
    <ProductNDC>62332-812</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
    <NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION</DosageFormName>
    <RouteName>INTRA-ARTICULAR; INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20251017</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218601</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intramuscular  Where oral therapy is not feasible, injectable corticosteroid therapy, including triamcinolone acetonide injectable suspension is indicated for intramuscular use as follows:Allergic states: Control of severe or incapacitating allergic conditions intractable to adequate trials of conventional treatment in asthma, atopic dermatitis, contact dermatitis, drug hypersensitivity reactions, perennial or seasonal allergic rhinitis, serum sickness, transfusion reactions. Dermatologic diseases: Bullous dermatitis herpetiformis, exfoliative erythroderma, mycosis fungoides, pemphigus, severe erythema multiforme (Stevens-Johnson syndrome). Endocrine disorders: Primary or secondary adrenocortical insufficiency (hydrocortisone or cortisone is the drug of choice; synthetic analogs may be used in conjunction with mineralocorticoids where applicable; in infancy, mineralocorticoid supplementation is of particular importance), congenital adrenal hyperplasia, hypercalcemia associated with cancer, nonsuppurative thyroiditis. Gastrointestinal diseases: To tide the patient over a critical period of the disease in regional enteritis and ulcerative colitis. Hematologic disorders: Acquired (autoimmune) hemolytic anemia, Diamond-Blackfan anemia, pure red cell aplasia, selected cases of secondary thrombocytopenia. Miscellaneous: Trichinosis with neurologic or myocardial involvement, tuberculous meningitis with subarachnoid block or impending block when used with appropriate antituberculous chemotherapy. Neoplastic diseases: For the palliative management of leukemias and lymphomas. Nervous system: Acute exacerbations of multiple sclerosis; cerebral edema associated with primary or metastatic brain tumor or craniotomy. Ophthalmic diseases: Sympathetic ophthalmia, temporal arteritis, uveitis, and ocular inflammatory conditions unresponsive to topical corticosteroids. Renal diseases: To induce diuresis or remission of proteinuria in idiopathic nephrotic syndrome or that due to lupus erythematosus. Respiratory diseases: Berylliosis, fulminating or disseminated pulmonary tuberculosis when used concurrently with appropriate antituberculous chemotherapy, idiopathic eosinophilic pneumonias, symptomatic sarcoidosis.Rheumatic disorders: As adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis; acute rheumatic carditis; ankylosing spondylitis; psoriatic arthritis; rheumatoid arthritis, including juvenile rheumatoid arthritis (selected cases may require low-dose maintenance therapy). For the treatment of dermatomyositis, polymyositis, and systemic lupus erythematosus. Intra-Articular The intra-articular or soft tissue administration of triamcinolone acetonide injectable suspension is indicated as adjunctive therapy for short-term administration (to tide the patient over an acute episode or exacerbation) in acute gouty arthritis, acute and subacute bursitis, acute nonspecific tenosynovitis, epicondylitis, rheumatoid arthritis, synovitis of osteoarthritis.</IndicationAndUsage>
    <Description>Triamcinolone acetonide injectable suspension, USP is a synthetic glucocorticoid corticosteroid with anti-inflammatory action. THESE FORMULATION ARE SUITABLE FOR INTRAMUSCULAR AND INTRA-ARTICULAR USE ONLY. THESE FORMULATION ARE NOT FOR INTRADERMAL INJECTION.  Each mL of the sterile aqueous suspension provides 40 mg triamcinolone acetonide, USP with 0.66% sodium chloride for isotonicity, 0.94% (v/v) benzyl alcohol as a preservative, 0.63% carboxymethylcellulose sodium, and 0.04% polysorbate 80. Sodium hydroxide or hydrochloric acid may be present to adjust pH to 5.0 to 7.5. At the time of manufacture, the air in the container is replaced by nitrogen.  The chemical name for triamcinolone acetonide is 9-Fluoro-11β,16α,17,21-tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with acetone. Its structural formula is. MW 434.50            Triamcinolone acetonide occurs as a white to almost-white, crystalline powder and is sparingly soluble in alcohol, methanol and chloroform; very slightly soluble in ether; practically insoluble in water.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-0522-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0074-0522-60) </PackageDescription>
    <NDC11Code>00074-0522-60</NDC11Code>
    <ProductNDC>0074-0522</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>100; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use: : 1 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Microbiology (12.4)]. .</IndicationAndUsage>
    <Description>KALETRA is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula:. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula:. KALETRA tablets are available for oral administration in two strengths: : 1 Yellow or red tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pale yellow or pink tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-3008-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (0074-3008-60) </PackageDescription>
    <NDC11Code>00074-3008-60</NDC11Code>
    <ProductNDC>0074-3008</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200408</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>100; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240614</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use: : 1 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Microbiology (12.4)]. .</IndicationAndUsage>
    <Description>KALETRA is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula:. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula:. KALETRA tablets are available for oral administration in two strengths: : 1 Red tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pink tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-3956-46</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (0074-3956-46)  / 160 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00074-3956-46</NDC11Code>
    <ProductNDC>0074-3956</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021251</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>80; 20</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use: : 1 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Microbiology (12.4)]. .</IndicationAndUsage>
    <Description>KALETRA is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula:. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula:. KALETRA tablets are available for oral administration in two strengths: : 1 Red tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pink tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-4014-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (0074-4014-12) </PackageDescription>
    <NDC11Code>00074-4014-12</NDC11Code>
    <ProductNDC>0074-4014</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200408</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-08-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use: : 1 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Microbiology (12.4)]. .</IndicationAndUsage>
    <Description>KALETRA is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula:. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula:. KALETRA tablets are available for oral administration in two strengths: : 1 Red tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pink tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>0074-6799-22</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (0074-6799-22) </PackageDescription>
    <NDC11Code>00074-6799-22</NDC11Code>
    <ProductNDC>0074-6799</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>AbbVie Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-08-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use: : 1 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Microbiology (12.4)]. .</IndicationAndUsage>
    <Description>KALETRA is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula:. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula:. KALETRA tablets are available for oral administration in two strengths: : 1 Yellow or red tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pale yellow or pink tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>10544-628-90</NDCCode>
    <PackageDescription>90 TABLET in 1 BOTTLE (10544-628-90)</PackageDescription>
    <NDC11Code>10544-0628-90</NDC11Code>
    <ProductNDC>10544-628</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Topiramate</ProprietaryName>
    <NonProprietaryName>Topiramate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140122</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079162</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>TOPIRAMATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Topiramate Tablets USP are an antiepileptic (AED) agent indicated for: 1 Monotherapy epilepsy: Initial monotherapy in patients ≥ 10 years of age with partial onset or primary generalized tonic-clonic seizures (1.1), 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥ 2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2).</IndicationAndUsage>
    <Description>Topiramate, USP is a sulfamate-substituted monosaccharide. Topiramate Tablets USP are available as 25 mg, 50 mg, 100 mg, and 200 mg capsule-shaped tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate, USP is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2, 3:4, 5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula. Topiramate tablets contain the following inactive ingredients: lactose monohydrate, microcrystalline cellulose, pre-gelatinized starch (maize), sodium starch glycolate, magnesium stearate, opadry white (titanium dioxide, hypromellose 3cp, hypromellose 6cp, PEG 400, polysorbate 80) for 25 mg tablets, opadry yellow (titanium dioxide, hypromellose 3cp, hypromellose 6cp, PEG 400, polysorbate 80, iron oxide yellow) for 50 mg tablets, opadry yellow (hypromellose 3cp, hypromellose 6cp, titanium dioxide, PEG 400, iron oxide yellow, polysorbate 80, iron oxide red) for 100 mg tablets and, opadry pink (titanium dioxide, hypromellose 6cp, PEG 400, iron oxide red) for 200 mg tablets.</Description>
  </NDC>
  <NDC>
    <NDCCode>11819-342-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (11819-342-20)</PackageDescription>
    <NDC11Code>11819-0342-20</NDC11Code>
    <ProductNDC>11819-342</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>HHS/Program Support Center/Supply Service Center</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>HIV Protease Inhibitors [MoA],Cytochrome P450 3A Inhibitor [EPC],Protease Inhibitor [EPC],Cytochrome P450 3A Inhibitors [MoA],Cytochrome P450 2D6 Inhibitors [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],UDP Glucuronosyltransferases Inducers [MoA],HIV Protease Inhibitors [MoA],Protease Inhibitor [EPC],P-Glycoprotein Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. The following points should be considered when initiating therapy with KALETRA: 1 The use of other active agents with KALETRA is associated with a greater likelihood of treatment response [see Clinical Pharmacology (12.4) and Clinical Studies (14)]., 2 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA [see Clinical Pharmacology (12.4)]. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Clinical Pharmacology (12.4)]., 3 Once daily administration of KALETRA is not recommended for any pediatric patients.</IndicationAndUsage>
    <Description>KALETRA (lopinavir/ritonavir) is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula. KALETRA film-coated tablets are available for oral administration in two strengths: : 1 Yellow tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pale yellow tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>21695-362-12</NDCCode>
    <PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (21695-362-12)</PackageDescription>
    <NDC11Code>21695-0362-12</NDC11Code>
    <ProductNDC>21695-362</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Kaletra</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100618</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021906</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>HIV Protease Inhibitors [MoA],Cytochrome P450 3A Inhibitor [EPC],Protease Inhibitor [EPC],Cytochrome P450 3A Inhibitors [MoA],Cytochrome P450 2D6 Inhibitors [MoA],Cytochrome P450 2C19 Inducers [MoA],Cytochrome P450 3A Inducers [MoA],P-Glycoprotein Inhibitors [MoA],Breast Cancer Resistance Protein Inhibitors [MoA],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 1A2 Inducers [MoA],Cytochrome P450 2C9 Inducers [MoA],Cytochrome P450 2B6 Inducers [MoA],UDP Glucuronosyltransferases Inducers [MoA],HIV Protease Inhibitors [MoA],Protease Inhibitor [EPC],P-Glycoprotein Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>KALETRA is indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection. The following points should be considered when initiating therapy with KALETRA: 1 The use of other active agents with KALETRA is associated with a greater likelihood of treatment response [see Clinical Pharmacology (12.4) and Clinical Studies (14)]., 2 Genotypic or phenotypic testing and/or treatment history should guide the use of KALETRA [see Clinical Pharmacology (12.4)]. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to KALETRA [see Clinical Pharmacology (12.4)]., 3 Once daily administration of KALETRA is not recommended for any pediatric patients.</IndicationAndUsage>
    <Description>KALETRA (lopinavir/ritonavir) is a co-formulation of lopinavir and ritonavir. Lopinavir is an inhibitor of the HIV-1 protease. As co-formulated in KALETRA, ritonavir inhibits the CYP3A-mediated metabolism of lopinavir, thereby providing increased plasma levels of lopinavir. Lopinavir is chemically designated as [1S-[1R*,(R*), 3R*, 4R*]]-N-[4-[[(2,6-dimethylphenoxy)acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2H)-pyrimidineacetamide. Its molecular formula is C37H48N4O5, and its molecular weight is 628.80. Lopinavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Lopinavir has the following structural formula. Ritonavir is chemically designated as 10-hydroxy-2-methyl-5-(1-methylethyl)-1- [2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-2,4,7,12-tetraazatridecan-13-oic acid, 5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C37H48N6O5S2, and its molecular weight is 720.95. Ritonavir is a white to light tan powder. It is freely soluble in methanol and ethanol, soluble in isopropanol and practically insoluble in water. Ritonavir has the following structural formula. KALETRA film-coated tablets are available for oral administration in two strengths: : 1 Yellow tablets containing 200 mg of lopinavir and 50 mg of ritonavir, 2 Pale yellow tablets containing 100 mg of lopinavir and 25 mg of ritonavir.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (31722-556-12) </PackageDescription>
    <NDC11Code>31722-0556-12</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-31</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (31722-556-31)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0556-31</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-32</NDCCode>
    <PackageDescription>8 BLISTER PACK in 1 CARTON (31722-556-32)  &gt; 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>31722-0556-32</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-556-60</NDCCode>
    <PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (31722-556-60) </PackageDescription>
    <NDC11Code>31722-0556-60</NDC11Code>
    <ProductNDC>31722-556</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>200; 50</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>31722-603-12</NDCCode>
    <PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (31722-603-12) </PackageDescription>
    <NDC11Code>31722-0603-12</NDC11Code>
    <ProductNDC>31722-603</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lopinavir And Ritonavir</ProprietaryName>
    <NonProprietaryName>Lopinavir And Ritonavir</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210607</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091677</ApplicationNumber>
    <LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>LOPINAVIR; RITONAVIR</SubstanceName>
    <StrengthNumber>100; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Breast Cancer Resistance Protein Inhibitors [MoA], Cytochrome P450 1A2 Inducers [MoA], Cytochrome P450 2B6 Inducers [MoA], Cytochrome P450 2C19 Inducers [MoA], Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inducers [MoA], Cytochrome P450 3A Inhibitor [EPC], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Cytochrome P450 3A4 Inhibitors [MoA], HIV Protease Inhibitors [MoA], HIV Protease Inhibitors [MoA], Organic Anion Transporting Polypeptide 1B1 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA], Protease Inhibitor [EPC], Protease Inhibitor [EPC], UDP Glucuronosyltransferases Inducers [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-06-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210607</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lopinavir and ritonavir tablets are indicated in combination with other antiretroviral agents for the treatment of HIV-1 infection in adults and pediatric patients 14 days and older. Limitations of Use:   Genotypic or phenotypic testing and/or treatment history should guide the use of lopinavir and ritonavir tablets. The number of baseline lopinavir resistance-associated substitutions affects the virologic response to lopinavir and ritonavir tablets [see Microbiology  (12.4)].</IndicationAndUsage>
    <Description>Lopinavir and Ritonavir Tablets, USP is a co-formulation of lopinavir USP and ritonavir USP. Lopinavir USP is an inhibitor of the HIV-1 protease. As co-formulated in lopinavir and ritonavir, ritonavir USP inhibits the CYP3A-mediated metabolism of lopinavir USP, thereby providing increased plasma levels of lopinavir USP. Lopinavir USP is chemically designated as [1 S-[1 R*, ( R*),3 R*,4 R*]]- N-[4-[[(2,6-dimethylphenoxy) acetyl]amino]-3-hydroxy-5-phenyl-1-(phenylmethyl)pentyl]tetrahydro-alpha-(1-methylethyl)-2-oxo-1(2 H)-pyrimidineacetamide. Its molecular formula is C 37H 48N 4O 5, and its molecular weight is 628.80. Lopinavir USP is a white to off-white powder. It is practically insoluble in water, freely soluble in methanol, ethanol and in isopropyl alcohol. Lopinavir USP has the following structural formula:. Ritonavir USP is chemically designated as 2,4,7,12-tetraazatridecan-13-oic acid, 10-hydroxy-2-methyl-5-(1-methylethyl)-1-[2-(1-methylethyl)-4-thiazolyl]-3,6-dioxo-8,11-bis(phenylmethyl)-5-thiazolylmethyl ester, [5S-(5R*,8R*,10R*,11R*)]. Its molecular formula is C 37H 48N 6O 5S 2, and its molecular weight is 720.94. Ritonavir USP is a white to off-white powder. It is freely soluble in methanol, methylene chloride, sparingly soluble in acetonitrile and practically insoluble in water. Ritonavir USP has the following structural formula:. Lopinavir and ritonavir film coated tablets USP are available for oral administration in two strengths:  Yellow tablets containing 200 mg of lopinavir USP and 50 mg of ritonavir USP  Yellow tablets containing 100 mg of lopinavir USP and 25 mg of ritonavir USP The yellow, 200 mg lopinavir/50 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide. The yellow, 100 mg lopinavir/25 mg ritonavir, tablets contain the following inactive ingredients: colloidal silicon dioxide, copovidone, sodium stearyl fumarate, sorbitan monolaurate and opadry yellow which contains colloidal anhydrous silica, hypromellose, hydroxypropyl cellulose, iron oxide yellow, polyethylene glycol, polysorbate 80, talc and titanium dioxide.</Description>
  </NDC>
</NDCList>