{
"NDC": [
{
"NDCCode": "62756-310-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-310-81)",
"NDC11Code": "62756-0310-81",
"ProductNDC": "62756-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-310-08",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (62756-310-08)",
"NDC11Code": "62756-0310-08",
"ProductNDC": "62756-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-310-18",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (62756-310-18)",
"NDC11Code": "62756-0310-18",
"ProductNDC": "62756-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-310-83",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (62756-310-83)",
"NDC11Code": "62756-0310-83",
"ProductNDC": "62756-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-310-88",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (62756-310-88)",
"NDC11Code": "62756-0310-88",
"ProductNDC": "62756-310",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-064-81",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (62756-064-81) ",
"NDC11Code": "62756-0064-81",
"ProductNDC": "62756-064",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fingolimod",
"NonProprietaryName": "Fingolimod",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20221025",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208014",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "FINGOLIMOD HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]",
"Status": "Active",
"LastUpdate": "2025-09-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20221025",
"SamplePackage": "N",
"IndicationAndUsage": "Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.",
"Description": "Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to off white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate and polacrilin potassium. Components of the gelatin capsule include gelatin, iron oxide yellow, sodium lauryl sulfate, titanium dioxide and water. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution."
},
{
"NDCCode": "62756-144-81",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (62756-144-81)",
"NDC11Code": "62756-0144-81",
"ProductNDC": "62756-144",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141215",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077058",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-17"
},
{
"NDCCode": "62756-160-81",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (62756-160-81) ",
"NDC11Code": "62756-0160-81",
"ProductNDC": "62756-160",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100715",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090931",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2021-01-05",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20100715",
"SamplePackage": "N",
"IndicationAndUsage": "Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.",
"Description": "Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. It meets USP Dissolution Test 9."
},
{
"NDCCode": "62756-194-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-194-81) ",
"NDC11Code": "62756-0194-81",
"ProductNDC": "62756-194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20150617",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204293",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "23",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2018-11-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20150617",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride tablets are indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil hydrochloride tablets, USP are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are lactose monohydrate, corn starch, microcrystalline cellulose, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, talc and magnesium stearate. The film coating contains talc, polyethylene glycol, hypromellose and titanium dioxide. Additionally, the 10 mg tablet contains yellow iron oxide as a coloring agent. Donepezil hydrochloride tablets are available for oral administration in film-coated tablets containing 23 mg of donepezil hydrochloride, USP. Inactive ingredients in 23 mg tablets include lactose monohydrate, microcrystalline cellulose, hypromellose, methacrylic acid copolymer Type C, and magnesium stearate. The film coating includes hypromellose, iron oxide yellow, polyethylene glycol, iron oxide red, titanium dioxide and lactose monohydrate. USP dissolution test pending for 23 mg tablet."
},
{
"NDCCode": "62756-311-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-311-81)",
"NDC11Code": "62756-0311-81",
"ProductNDC": "62756-311",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-312-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-312-81)",
"NDC11Code": "62756-0312-81",
"ProductNDC": "62756-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-313-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-313-81)",
"NDC11Code": "62756-0313-81",
"ProductNDC": "62756-313",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Quinapril",
"NonProprietaryName": "Quinapril",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090618",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090800",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "QUINAPRIL HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.",
"Description": "Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "62756-440-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-440-81)",
"NDC11Code": "62756-0440-81",
"ProductNDC": "62756-440",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090493",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-17"
},
{
"NDCCode": "62756-445-81",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (62756-445-81)",
"NDC11Code": "62756-0445-81",
"ProductNDC": "62756-445",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090493",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-02-17"
},
{
"NDCCode": "62756-580-81",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (62756-580-81)",
"NDC11Code": "62756-0580-81",
"ProductNDC": "62756-580",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20141215",
"EndMarketingDate": "20171130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077058",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-12-07"
},
{
"NDCCode": "62756-232-55",
"PackageDescription": "1 BOTTLE in 1 CARTON (62756-232-55) / 10 mL in 1 BOTTLE",
"NDC11Code": "62756-0232-55",
"ProductNDC": "62756-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210501",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212450",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210501",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg."
},
{
"NDCCode": "62756-232-56",
"PackageDescription": "1 BOTTLE in 1 CARTON (62756-232-56) / 15 mL in 1 BOTTLE",
"NDC11Code": "62756-0232-56",
"ProductNDC": "62756-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210501",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212450",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210501",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg."
},
{
"NDCCode": "62756-232-90",
"PackageDescription": "1 BOTTLE in 1 CARTON (62756-232-90) / 5 mL in 1 BOTTLE",
"NDC11Code": "62756-0232-90",
"ProductNDC": "62756-232",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Loteprednol Etabonate",
"NonProprietaryName": "Loteprednol Etabonate",
"DosageFormName": "SUSPENSION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20210501",
"EndMarketingDate": "20261231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212450",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "LOTEPREDNOL ETABONATE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20210501",
"EndMarketingDatePackage": "20261231",
"SamplePackage": "N",
"IndicationAndUsage": "Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.",
"Description": "Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg."
},
{
"NDCCode": "62756-329-90",
"PackageDescription": "1 BOTTLE in 1 CARTON (62756-329-90) > 5 mL in 1 BOTTLE",
"NDC11Code": "62756-0329-90",
"ProductNDC": "62756-329",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Epinastine Hydrochloride",
"NonProprietaryName": "Epinastine Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20111101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091626",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "EPINASTINE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Adrenergic Agonists [MoA],Adrenergic Receptor Agonist [EPC],Decreased Histamine Release [PE],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20111101",
"SamplePackage": "N",
"IndicationAndUsage": "Epinastine hydrochloride ophthalmic solution is indicated for the prevention of itching associated with allergic conjunctivitis.",
"Description": "Epinastine hydrochloride ophthalmic solution 0.05% is a clear, colorless, sterile isotonic solution containing epinastine hydrochloride, an antihistamine and an inhibitor of histamine release from the mast cell for topical administration to the eyes.Epinastine hydrochloride is represented by the following structural formula. Chemical Name: 3-Amino-9, 13b-dihydro-1H-dibenz[c,f]imidazo[1,5-a]azepine hydrochloride Each mL contains: Active: Epinastine hydrochloride 0.05% (0.5 mg/mL) equivalent to epinastine 0.044% (0.44 mg/mL); Preservative: Benzalkonium chloride solution (50%) 0.02%; Inactives: Edetate disodium; water for injection; sodium chloride; monobasic sodium phosphate; and sodium hydroxide and/or hydrochloric acid (to adjust the pH). Epinastine hydrochloride ophthalmic solution has a pH of approximately 7 and an osmolality range of 250 to 310 mOsm/kg."
},
{
"NDCCode": "62756-523-08",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (62756-523-08) ",
"NDC11Code": "62756-0523-08",
"ProductNDC": "62756-523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078359",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20101124",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.",
"Description": "Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "62756-523-13",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (62756-523-13) ",
"NDC11Code": "62756-0523-13",
"ProductNDC": "62756-523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078359",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20101124",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.",
"Description": "Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "62756-523-18",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (62756-523-18) ",
"NDC11Code": "62756-0523-18",
"ProductNDC": "62756-523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078359",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20101124",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.",
"Description": "Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "62756-523-83",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (62756-523-83) ",
"NDC11Code": "62756-0523-83",
"ProductNDC": "62756-523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078359",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20101124",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.",
"Description": "Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "62756-523-88",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (62756-523-88) ",
"NDC11Code": "62756-0523-88",
"ProductNDC": "62756-523",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desloratadine",
"NonProprietaryName": "Desloratadine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078359",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESLORATADINE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20101124",
"SamplePackage": "N",
"IndicationAndUsage": "Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.",
"Description": "Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure."
},
{
"NDCCode": "68982-810-01",
"PackageDescription": "1 VIAL, GLASS in 1 CARTON (68982-810-01) > 6 mL in 1 VIAL, GLASS (68982-810-81) ",
"NDC11Code": "68982-0810-01",
"ProductNDC": "68982-810",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Cutaquig",
"NonProprietaryName": "Immunoglobulin G",
"DosageFormName": "SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125668",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "165",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2022-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.",
"Description": "CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable."
},
{
"NDCCode": "68982-820-01",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-820-01) > 10 mL in 1 BOTTLE, GLASS (68982-820-81) ",
"NDC11Code": "68982-0820-01",
"ProductNDC": "68982-820",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "68982-822-01",
"PackageDescription": "1 BOTTLE, GLASS in 1 CARTON (68982-822-01) / 10 mL in 1 BOTTLE, GLASS (68982-822-81) ",
"NDC11Code": "68982-0822-01",
"ProductNDC": "68982-822",
"ProductTypeName": "PLASMA DERIVATIVE",
"ProprietaryName": "Panzyga",
"NonProprietaryName": "Immune Globulin Intravenous (human)",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181112",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA125587",
"LabelerName": "Octapharma USA Inc",
"SubstanceName": "HUMAN IMMUNOGLOBULIN G",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]",
"Status": "Active",
"LastUpdate": "2026-01-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181112",
"SamplePackage": "N",
"Description": "Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed."
},
{
"NDCCode": "70920-310-01",
"PackageDescription": "27 mL in 1 POUCH (70920-310-01) ",
"NDC11Code": "70920-0310-01",
"ProductNDC": "70920-310",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Jayjun Pollution Proof Refreshing Mask",
"NonProprietaryName": "Glycerin",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181201",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "JAYJUN COSMETIC Co.,Ltd.",
"SubstanceName": "GLYCERIN",
"StrengthNumber": ".81",
"StrengthUnit": "g/27mL",
"Status": "Deprecated",
"LastUpdate": "2019-12-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N"
},
{
"NDCCode": "62756-001-11",
"PackageDescription": "25 kg in 1 DRUM (62756-001-11) ",
"NDC11Code": "62756-0001-11",
"ProductNDC": "62756-001",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Tofacitinib Citrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20160404",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "SUN PHARMACEUTICAL INDUSTRIES, INC.",
"SubstanceName": "TOFACITINIB CITRATE",
"StrengthNumber": "25",
"StrengthUnit": "kg/25kg",
"Status": "Unfinished",
"LastUpdate": "2025-11-24",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "21-NOV-25"
},
{
"NDCCode": "62756-008-60",
"PackageDescription": "1 POUCH in 1 CARTON (62756-008-60) > 1 BAG in 1 POUCH > 130 mL in 1 BAG",
"NDC11Code": "62756-0008-60",
"ProductNDC": "62756-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Infugem",
"NonProprietaryName": "Gemcitabine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20181001",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208313",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "GEMCITABINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20181001",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62756-310-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-310-81)</PackageDescription>
<NDC11Code>62756-0310-81</NDC11Code>
<ProductNDC>62756-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-310-08</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (62756-310-08)</PackageDescription>
<NDC11Code>62756-0310-08</NDC11Code>
<ProductNDC>62756-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-310-18</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (62756-310-18)</PackageDescription>
<NDC11Code>62756-0310-18</NDC11Code>
<ProductNDC>62756-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-310-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62756-310-83)</PackageDescription>
<NDC11Code>62756-0310-83</NDC11Code>
<ProductNDC>62756-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-310-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (62756-310-88)</PackageDescription>
<NDC11Code>62756-0310-88</NDC11Code>
<ProductNDC>62756-310</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-064-81</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (62756-064-81) </PackageDescription>
<NDC11Code>62756-0064-81</NDC11Code>
<ProductNDC>62756-064</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fingolimod</ProprietaryName>
<NonProprietaryName>Fingolimod</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20221025</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208014</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>FINGOLIMOD HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sphingosine 1-Phosphate Receptor Modulators [MoA], Sphingosine 1-phosphate Receptor Modulator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20221025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fingolimod capsules are indicated for the treatment of relapsing forms of multiple sclerosis (MS), to include clinically isolated syndrome, relapsing-remitting disease, and active secondary progressive disease, in patients 10 years of age and older.</IndicationAndUsage>
<Description>Fingolimod is a sphingosine 1-phosphate receptor modulator. Chemically, fingolimod is 2-amino-2-[2-(4-octylphenyl)ethyl]propan-1,3-diol hydrochloride. Its structure is shown below. Fingolimod hydrochloride is a white to off white powder that is freely soluble in water and alcohol and soluble in propylene glycol. It has a molecular weight of 343.93 g/mol. Fingolimod is provided as 0.5 mg hard gelatin capsules for oral use. Each capsule contains 0.56 mg of fingolimod hydrochloride, USP equivalent to 0.5 mg of fingolimod. Each fingolimod 0.5 mg capsule contains the following inactive ingredients: colloidal silicon dioxide, crospovidone, magnesium stearate and polacrilin potassium. Components of the gelatin capsule include gelatin, iron oxide yellow, sodium lauryl sulfate, titanium dioxide and water. The imprinting black ink contains black iron oxide, butyl alcohol, potassium hydroxide, propylene glycol, shellac and strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>62756-144-81</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (62756-144-81)</PackageDescription>
<NDC11Code>62756-0144-81</NDC11Code>
<ProductNDC>62756-144</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077058</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>62756-160-81</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (62756-160-81) </PackageDescription>
<NDC11Code>62756-0160-81</NDC11Code>
<ProductNDC>62756-160</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100715</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090931</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-01-05</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tamsulosin hydrochloride capsules, USP are indicated for the treatment of the signs and symptoms of benign prostatic hyperplasia (BPH) [see Clinical Studies (14)]. Tamsulosin hydrochloride capsules are not indicated for the treatment of hypertension.</IndicationAndUsage>
<Description>Tamsulosin hydrochloride is an antagonist of alpha1A adrenoceptors in the prostate.Tamsulosin hydrochloride is (-)-(R)-5-[2-[[2-(o-Ethoxyphenoxy) ethyl]amino]propyl]-2-methoxybenzenesulfonamide, monohydrochloride. Tamsulosin hydrochloride is a white or almost white crystalline powder that melts with decomposition at approximately 230°C. It is slightly soluble in water, freely soluble in formic acid, slightly soluble in anhydrous ethanol, sparingly soluble in methanol, slightly soluble in glacial acetic acid, and practically insoluble in ether. The molecular formula of tamsulosin hydrochloride is C20H28N2O5S HCl. The molecular weight of tamsulosin hydrochloride is 444.98. Its structural formula is. Each tamsulosin hydrochloride capsule USP for oral administration contains tamsulosin hydrochloride USP 0.4 mg, and the following inactive ingredients: microcrystalline cellulose, methacrylic acid copolymer dispersion, hypromellose acetate succinate, triethyl citrate, talc, and sodium lauryl sulfate. The capsule shell contains gelatin, sodium lauryl sulfate, FD&C blue No. 2, ferric oxide red, ferric oxide yellow, and titanium dioxide.Imprinting black ink contains shellac, dehydrated alcohol, butyl alcohol, propylene glycol, strong ammonia solution, black iron oxide, and potassium hydroxide. It meets USP Dissolution Test 9.</Description>
</NDC>
<NDC>
<NDCCode>62756-194-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-194-81) </PackageDescription>
<NDC11Code>62756-0194-81</NDC11Code>
<ProductNDC>62756-194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150617</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204293</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>23</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-11-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150617</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride tablets are indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white crystalline powder and is freely soluble in chloroform, soluble in water and in glacial acetic acid, slightly soluble in ethanol and in acetonitrile, and practically insoluble in ethyl acetate and in n-hexane. Donepezil hydrochloride tablets, USP are available for oral administration in film-coated tablets containing 5 mg or 10 mg of donepezil hydrochloride, USP. Inactive ingredients in 5 mg and 10 mg tablets are lactose monohydrate, corn starch, microcrystalline cellulose, hydroxypropyl cellulose, low substituted hydroxypropyl cellulose, talc and magnesium stearate. The film coating contains talc, polyethylene glycol, hypromellose and titanium dioxide. Additionally, the 10 mg tablet contains yellow iron oxide as a coloring agent. Donepezil hydrochloride tablets are available for oral administration in film-coated tablets containing 23 mg of donepezil hydrochloride, USP. Inactive ingredients in 23 mg tablets include lactose monohydrate, microcrystalline cellulose, hypromellose, methacrylic acid copolymer Type C, and magnesium stearate. The film coating includes hypromellose, iron oxide yellow, polyethylene glycol, iron oxide red, titanium dioxide and lactose monohydrate. USP dissolution test pending for 23 mg tablet.</Description>
</NDC>
<NDC>
<NDCCode>62756-311-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-311-81)</PackageDescription>
<NDC11Code>62756-0311-81</NDC11Code>
<ProductNDC>62756-311</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-312-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-312-81)</PackageDescription>
<NDC11Code>62756-0312-81</NDC11Code>
<ProductNDC>62756-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-313-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-313-81)</PackageDescription>
<NDC11Code>62756-0313-81</NDC11Code>
<ProductNDC>62756-313</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Quinapril</ProprietaryName>
<NonProprietaryName>Quinapril</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090618</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090800</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>QUINAPRIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Hypertension. Quinapril hydrochloride tablets are indicated for the treatment of hypertension. It may be used alone or in combination with thiazide diuretics. In using quinapril hydrochloride tablets, consideration should be given to the fact that another angiotensin-converting enzyme inhibitor, captopril, has caused agranulocytosis, particularly in patients with renal impairment or collagen vascular disease. Available data are insufficient to show that quinapril hydrochloride tablets do not have a similar risk (see WARNINGS). Angioedema in Black Patients. Black patients receiving ACE inhibitor monotherapy have been reported to have a higher incidence of angioedema compared to non-blacks. It should also be noted that in controlled clinical trials ACE inhibitors have an effect on blood pressure that is less in black patients than in non-blacks.</IndicationAndUsage>
<Description>Quinapril hydrochloride is the hydrochloride salt of quinapril, the ethyl ester of a non-sulfhydryl, angiotensin-converting enzyme (ACE) inhibitor, quinaprilat. Quinapril hydrochloride is chemically described as [3S-[2[R*(R*)], 3R*]]-2-[2-[[1-(ethoxycarbonyl)-3-phenylpropyl]amino]-1-oxopropyl]-1,2,3,4-tetrahydro-3- isoquinolinecarboxylic acid, monohydrochloride. Its molecular formula is C25H30N2O5HCl and its structural formula is. Quinapril hydrochloride, USP is a white to off-white amorphous powder that is freely soluble in aqueous solvents. Quinapril tablets, USP contain 5 mg, 10 mg, 20 mg, or 40 mg of quinapril for oral administration. Each tablet also contains magnesium carbonate, lactose monohydrate, crospovidone, gelatin, magnesium stearate, hydroxypropyl cellulose, hypromellose, iron oxide red, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>62756-440-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-440-81)</PackageDescription>
<NDC11Code>62756-0440-81</NDC11Code>
<ProductNDC>62756-440</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090493</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>62756-445-81</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62756-445-81)</PackageDescription>
<NDC11Code>62756-0445-81</NDC11Code>
<ProductNDC>62756-445</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090493</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>62756-580-81</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (62756-580-81)</PackageDescription>
<NDC11Code>62756-0580-81</NDC11Code>
<ProductNDC>62756-580</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141215</StartMarketingDate>
<EndMarketingDate>20171130</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077058</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-07</LastUpdate>
</NDC>
<NDC>
<NDCCode>62756-232-55</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62756-232-55) / 10 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>62756-0232-55</NDC11Code>
<ProductNDC>62756-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212450</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg.</Description>
</NDC>
<NDC>
<NDCCode>62756-232-56</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62756-232-56) / 15 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>62756-0232-56</NDC11Code>
<ProductNDC>62756-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212450</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg.</Description>
</NDC>
<NDC>
<NDCCode>62756-232-90</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62756-232-90) / 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>62756-0232-90</NDC11Code>
<ProductNDC>62756-232</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Loteprednol Etabonate</ProprietaryName>
<NonProprietaryName>Loteprednol Etabonate</NonProprietaryName>
<DosageFormName>SUSPENSION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20210501</StartMarketingDate>
<EndMarketingDate>20261231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212450</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>LOTEPREDNOL ETABONATE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20210501</StartMarketingDatePackage>
<EndMarketingDatePackage>20261231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Loteprednol etabonate ophthalmic suspension is indicated for the treatment of steroid responsive inflammatory conditions of the palpebral and bulbar conjunctiva, cornea and anterior segment of the globe such as allergic conjunctivitis, acne rosacea, superficial punctate keratitis, herpes zoster keratitis, iritis, cyclitis, selected infective conjunctivitides, when the inherent hazard of steroid use is accepted to obtain an advisable diminution in edema and inflammation. Loteprednol etabonate ophthalmic suspension is less effective than prednisolone acetate 1% in two 28-day controlled clinical studies in acute anterior uveitis, where 72% of patients treated with loteprednol etabonate ophthalmic suspension experienced resolution of anterior chamber cells, compared to 87% of patients treated with prednisolone acetate 1%. The incidence of patients with clinically significant increases in IOP (≥10 mmHg) was 1% with loteprednol etabonate ophthalmic suspension and 6% with prednisolone acetate 1%. Loteprednol etabonate ophthalmic suspension should not be used in patients who require a more potent corticosteroid for this indication. Loteprednol etabonate ophthalmic suspension is also indicated for the treatment of post-operative inflammation following ocular surgery.</IndicationAndUsage>
<Description>Loteprednol etabonate ophthalmic suspension contains a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. Loteprednol etabonate is a white to off-white powder. Loteprednol etabonate is represented by the following structural formula. C 24H 31ClO 7. Mol. Wt. 466.96. Chemical name: Chloromethyl 17α-[(ethoxycarbonyl)oxy]-11β-hydroxy-3-oxoandrosta-1,4-diene-17β-carboxylate. Each mL contains. ACTIVE: Loteprednol Etabonate 5 mg (0.5%);. INACTIVES: Edetate Disodium, Glycerin, Povidone, Water for Injection and Tyloxapol. Hydrochloric Acid and/or Sodium Hydroxide may be added to adjust the pH to 5.0 - 6.0. The suspension is essentially isotonic with a tonicity of 250 to 310 mOsmol/kg. PRESERVATIVE ADDED: Benzalkonium Chloride Solution (50%) 0.2 mg.</Description>
</NDC>
<NDC>
<NDCCode>62756-329-90</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (62756-329-90) > 5 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>62756-0329-90</NDC11Code>
<ProductNDC>62756-329</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Epinastine Hydrochloride</ProprietaryName>
<NonProprietaryName>Epinastine Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20111101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091626</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>EPINASTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Adrenergic Agonists [MoA],Adrenergic Receptor Agonist [EPC],Decreased Histamine Release [PE],Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20111101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Epinastine hydrochloride ophthalmic solution is indicated for the prevention of itching associated with allergic conjunctivitis.</IndicationAndUsage>
<Description>Epinastine hydrochloride ophthalmic solution 0.05% is a clear, colorless, sterile isotonic solution containing epinastine hydrochloride, an antihistamine and an inhibitor of histamine release from the mast cell for topical administration to the eyes.Epinastine hydrochloride is represented by the following structural formula. Chemical Name: 3-Amino-9, 13b-dihydro-1H-dibenz[c,f]imidazo[1,5-a]azepine hydrochloride Each mL contains: Active: Epinastine hydrochloride 0.05% (0.5 mg/mL) equivalent to epinastine 0.044% (0.44 mg/mL); Preservative: Benzalkonium chloride solution (50%) 0.02%; Inactives: Edetate disodium; water for injection; sodium chloride; monobasic sodium phosphate; and sodium hydroxide and/or hydrochloric acid (to adjust the pH). Epinastine hydrochloride ophthalmic solution has a pH of approximately 7 and an osmolality range of 250 to 310 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>62756-523-08</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (62756-523-08) </PackageDescription>
<NDC11Code>62756-0523-08</NDC11Code>
<ProductNDC>62756-523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078359</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62756-523-13</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (62756-523-13) </PackageDescription>
<NDC11Code>62756-0523-13</NDC11Code>
<ProductNDC>62756-523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078359</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62756-523-18</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (62756-523-18) </PackageDescription>
<NDC11Code>62756-0523-18</NDC11Code>
<ProductNDC>62756-523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078359</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62756-523-83</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62756-523-83) </PackageDescription>
<NDC11Code>62756-0523-83</NDC11Code>
<ProductNDC>62756-523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078359</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>62756-523-88</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (62756-523-88) </PackageDescription>
<NDC11Code>62756-0523-88</NDC11Code>
<ProductNDC>62756-523</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desloratadine</ProprietaryName>
<NonProprietaryName>Desloratadine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078359</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESLORATADINE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desloratadine is a histamine-1 (H1) receptor antagonist indicated for.</IndicationAndUsage>
<Description>Desloratadine tablets are blue, circular, film-coated tablets containing 5 mg desloratadine, an antihistamine, to be administered orally. Desloratadine tablets also contain the following excipients: corn starch, microcrystalline cellulose, meglumine, pregelatinized maize starch, sodium starch glycolate and sodium stearyl fumarate, coating material consisting of hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80 and FD&C Blue #2 Aluminum Lake. Desloratadine is a white to off-white powder that is slightly soluble in water, but very soluble in ethanol and propylene glycol. It has a molecular formula: C19H19ClN2 and a molecular weight of 310.8. The chemical name is 8-chloro-6,11-dihydro-11-(4-piperdinylidene)-5H-benzo[5,6]cyclohepta[1,2-b]pyridine and has the following structure.</Description>
</NDC>
<NDC>
<NDCCode>68982-810-01</NDCCode>
<PackageDescription>1 VIAL, GLASS in 1 CARTON (68982-810-01) > 6 mL in 1 VIAL, GLASS (68982-810-81) </PackageDescription>
<NDC11Code>68982-0810-01</NDC11Code>
<ProductNDC>68982-810</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Cutaquig</ProprietaryName>
<NonProprietaryName>Immunoglobulin G</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125668</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>165</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp) is a 16.5% immune globulin solution for subcutaneous infusion (IGSC), indicated as replacement therapy for primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older. This includes, but is not limited to, common variable immunodeficiency (CVID), X-linked agammaglobulinemia, congenital agammaglobulinemia, Wiskott-Aldrich syndrome, and severe combined immunodeficiencies.</IndicationAndUsage>
<Description>CUTAQUIG (Immune Globulin Subcutaneous (Human) - hipp), is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. CUTAQUIG is a solution for injection to be administered subcutaneously. This preparation contains approximately 165 mg of protein per mL (16.5%), of which not less than 96% is normal human immunoglobulin G. CUTAQUIG contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 3% fragments. The product contains on average 0.206 mg of IgA /mL. The sodium content of the final solution is not more than 30 mmol/L and the pH is between 5.0 and 5.5. The osmolality is 310 - 380 mOsmol/kg. The manufacturing process for CUTAQUIG isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. CUTAQUIG contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percent of total IgG: IgG1 is 70%, IgG2 is 25%, IgG3 is 3% and IgG4 is 2%. CUTAQUIG contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. It contains maltose (79 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of CUTAQUIG are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV-1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by ultrafiltration and chromatography. The manufacturing process includes treatment with an organic S/D mixture composed of tri-n-butyl phosphate (TNBP) and Octoxynol. The CUTAQUIG manufacturing process shows significant viral reduction in in vitro studies ( Table 6 ). These reductions are achieved through a combination of process steps including cold ethanol fractionation, S/D treatment and pH 4 treatment. Table 6 Pathogen Reduction During CUTAQUIG Manufacturing. * Not calculated for global Log 10 Reduction Factor. HIV-1: Human Immunodeficiency Virus - 1. PRV: Pseudorabies Virus, model virus for e.g. Hepatitis B Virus (HBV). SBV: Sindbis Virus, model virus for Hepatitis C Virus (HCV). MEV: Mouse Encephalomyelitis Virus, model virus for Human Parvovirus B19. PPV: Porcine Parvovirus, model virus for Hepatitis A Virus (HAV). n.a.: not applicable.</Description>
</NDC>
<NDC>
<NDCCode>68982-820-01</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-820-01) > 10 mL in 1 BOTTLE, GLASS (68982-820-81) </PackageDescription>
<NDC11Code>68982-0820-01</NDC11Code>
<ProductNDC>68982-820</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 90% monomers and dimers, and not more than 3% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>68982-822-01</NDCCode>
<PackageDescription>1 BOTTLE, GLASS in 1 CARTON (68982-822-01) / 10 mL in 1 BOTTLE, GLASS (68982-822-81) </PackageDescription>
<NDC11Code>68982-0822-01</NDC11Code>
<ProductNDC>68982-822</ProductNDC>
<ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
<ProprietaryName>Panzyga</ProprietaryName>
<NonProprietaryName>Immune Globulin Intravenous (human)</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181112</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA125587</ApplicationNumber>
<LabelerName>Octapharma USA Inc</LabelerName>
<SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181112</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Immune Globulin Intravenous (Human), PANZYGA, is a solvent/detergent (S/D)-treated, sterile preparation of highly purified immunoglobulin G (IgG) derived from large pools of human plasma. PANZYGA is a solution for infusion to be administered intravenously. This preparation contains approximately 100 mg of protein per mL (10%), of which not less than 96% is normal human immunoglobulin G. PANZYGA contains not more than 3% aggregates, not less than 94% monomers and dimers, and not more than 4% fragments. On average, the product contains 100 µg/mL of IgA, and lower amounts of IgM. PANZYGA contains only trace amounts of sodium, and the pH is between 4.5 and 5.0. The osmolality is in the range of 240-310 mosmol/kg. The manufacturing process for PANZYGA isolates IgG without additional chemical or enzymatic modification, and the Fc portion is maintained intact. PANZYGA contains the IgG antibody activities present in the donor population. IgG subclasses are fully represented with the following approximate percents of total IgG: IgG 1 is 65%, IgG 2 is 28%, IgG 3 is 3% and IgG 4 is 4%. PANZYGA contains a broad spectrum of IgG antibodies against bacterial and viral agents that are capable of opsonization and neutralization of microbes and toxins. PANZYGA contains glycine (15.0-19.5 mg/mL), but no preservatives or sucrose. All units of human plasma used in the manufacture of PANZYGA are provided by FDA-approved blood and plasma establishments, and are tested by FDA-licensed serological tests for HBsAg, antibodies to HCV and HIV and Nucleic Acid Test (NAT) for HCV and HIV1 and found to be non-reactive (negative). The product is manufactured by the cold ethanol fractionation process followed by purification methodologies, as well as S/D treatment and nanofiltration (20 nm). The S/D mixture used is composed of tri-n-butyl phosphate (TNBP, solvent) and Triton X-100 (Octoxynol, detergent). The PANZYGA manufacturing process shows significant viral reduction and inactivation, demonstrated by in vitro infectivity studies ( Table 4 ). The virus safety of PANZYGA is achieved through a combination of various process steps, including S/D treatment, ion-exchange chromatography, and nanofiltration (20 nm). Table 4 shows the virus clearance during the manufacturing process for PANZYGA, expressed as the mean log 10 reduction factor (LRF). Table 4: Virus Reduction by PANZYGA Manufacturing Process. HIV-1: Human Immunodeficiency Virus – 1, a model for HIV-1 and HIV-2;. PRV: Pseudorabies Virus, a model for large enveloped DNA viruses (e.g., herpes virus);. BVDV: Bovine Viral Diarrhea Virus, a model for e.g., Hepatitis C virus (HCV) and West-Nile virus (WNV);. MEV: Mouse Encephalomyelitis virus, a model for Hepatitis A virus (HAV);. PPV: Porcine Parvovirus, a model for Human Parvovirus B19;. n.a.: not applicable;. n.d: not done. Additionally, the manufacturing process was investigated for its capacity to decrease the infectivity of an experimental agent of transmissible spongiform encephalopathy (TSE), considered as a model for the vCJD and CJD agents. [ 10 ]. Several of the individual production steps in the PANZYGA manufacturing process were shown to decrease TSE infectivity of that experimental model agent. TSE reduction steps include ion-exchange chromatography and nanofiltration, which together give a total of at least 10.4 log10 decrease of infectivity. These studies provide reasonable assurance that low levels of CJD/vCJD agent infectivity, if present in the starting material, would be removed.</Description>
</NDC>
<NDC>
<NDCCode>70920-310-01</NDCCode>
<PackageDescription>27 mL in 1 POUCH (70920-310-01) </PackageDescription>
<NDC11Code>70920-0310-01</NDC11Code>
<ProductNDC>70920-310</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Jayjun Pollution Proof Refreshing Mask</ProprietaryName>
<NonProprietaryName>Glycerin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181201</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>JAYJUN COSMETIC Co.,Ltd.</LabelerName>
<SubstanceName>GLYCERIN</SubstanceName>
<StrengthNumber>.81</StrengthNumber>
<StrengthUnit>g/27mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-12-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62756-001-11</NDCCode>
<PackageDescription>25 kg in 1 DRUM (62756-001-11) </PackageDescription>
<NDC11Code>62756-0001-11</NDC11Code>
<ProductNDC>62756-001</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Tofacitinib Citrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20160404</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>SUN PHARMACEUTICAL INDUSTRIES, INC.</LabelerName>
<SubstanceName>TOFACITINIB CITRATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>kg/25kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-24</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>21-NOV-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>62756-008-60</NDCCode>
<PackageDescription>1 POUCH in 1 CARTON (62756-008-60) > 1 BAG in 1 POUCH > 130 mL in 1 BAG</PackageDescription>
<NDC11Code>62756-0008-60</NDC11Code>
<ProductNDC>62756-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Infugem</ProprietaryName>
<NonProprietaryName>Gemcitabine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20181001</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208313</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>GEMCITABINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>