{
"NDC": [
{
"NDCCode": "62756-529-26",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (62756-529-26) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "62756-0529-26",
"ProductNDC": "62756-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desmopressin Acetate",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20140220",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091280",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]",
"Status": "Active",
"LastUpdate": "2020-01-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20140220",
"SamplePackage": "N",
"IndicationAndUsage": "Hemophilia A: Desmopressin Acetate Injection 4 mcg/mL is indicated for patients with hemophilia A with factor VIII coagulant activity levels greater than 5%.Desmopressin acetate injection will often maintain hemostasis in patients with hemophilia A during surgical procedures and postoperatively when administered 30 minutes prior to scheduled procedure.Desmopressin acetate injection will also stop bleeding in hemophilia A patients with episodes of spontaneous or trauma-induced injuries such as hemarthroses, intramuscular hematomas or mucosal bleeding. In certain clinical situations, it may be justified to try desmopressin acetate injection in patients with factor VIII levels between 2% to 5%; however, these patients should be carefully monitored.von Willebrand’s Disease (Type I): Desmopressin acetate injection 4 mcg/mL is indicated for patients with mild to moderate classic von Willebrand’s disease (Type I) with factor VIII levels greater than 5%. Desmopressin acetate injection will often maintain hemostasis in patients with mild to moderate von Willebrand’s disease during surgical procedures and postoperatively when administered 30 minutes prior to the scheduled procedure.Desmopressin acetate injection will usually stop bleeding in mild to moderate von Willebrand’s patients with episodes of spontaneous or trauma-induced injuries such as hemarthroses, intramuscular hematomas or mucosal bleeding.Those von Willebrand’s disease patients who are least likely to respond are those with severe homozygous von Willebrand’s disease with factor VIII coagulant activity and factor VIII von Willebrand factor antigen levels less than 1%. Other patients may respond in a variable fashion depending on the type of molecular defect they have. Bleeding time and factor VIII coagulant activity, ristocetin cofactor activity, and von Willebrand factor antigen should be checked during administration of desmopressin acetate injection to ensure that adequate levels are being achieved.Desmopressin acetate injection is not indicated for the treatment of severe classic von Willebrand’s disease (Type I) and when there is evidence of an abnormal molecular form of factor VIII antigen. (See WARNINGS.)Diabetes Insipidus: Desmopressin acetate injection 4 mcg/mL is indicated as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. Desmopressin acetate injection is ineffective for the treatment of nephrogenic diabetes insipidus.Desmopressin acetate is also available as an intranasal preparation. However, this means of delivery can be compromised by a variety of factors that can make nasal insufflation ineffective or inappropriate. These include poor intranasal absorption, nasal congestion and blockage, nasal discharge, atrophy of nasal mucosa, and severe atrophic rhinitis. Intranasal delivery may be inappropriate where there is an impaired level of consciousness. In addition, cranial surgical procedures, such as transsphenoidal hypophysectomy, create situations where an alternative route of administration is needed as in cases of nasal packing or recovery from surgery.",
"Description": "Desmopressin acetate. injection, USP 4 mcg/mL is a synthetic analogue of the natural pituitary hormone 8-arginine vasopressin (ADH), an antidiuretic hormone affecting renal water conservation. It is chemically defined as follows:Mol. Wt. 1069.23Molecular Formula: C46H64N14O12S2. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin acetate.Desmopressin acetate. Injection, USP 4 mcg/mL is provided as a sterile, aqueous solution for injection.Each mL provides:Desmopressin acetate, USP, 4 mcgSodium chloride, 9 mgHydrochloric acid to adjust pH to 4Water for injection, q.s. to 1 mLThe 10 mL vial contains chlorobutanol as a preservative (5 mg/mL)."
},
{
"NDCCode": "62756-529-40",
"PackageDescription": "1 VIAL in 1 CARTON (62756-529-40) > 10 mL in 1 VIAL",
"NDC11Code": "62756-0529-40",
"ProductNDC": "62756-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Desmopressin Acetate",
"NonProprietaryName": "Desmopressin Acetate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20130130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091280",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "DESMOPRESSIN ACETATE",
"StrengthNumber": "4",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]",
"Status": "Active",
"LastUpdate": "2022-08-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20130130",
"SamplePackage": "N",
"IndicationAndUsage": "Desmopressin acetate injection is a vasopressin analog used for. · Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1). · Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2). · von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3). Limitations of Use. · Desmopressin acetate is ineffective and not indicated for the treatment of nephrogenic diabetes insipidus. (1.3). von Willebrand’s disease (severe Type I) - not indicated for the treatment of patients with severe Type I von Willebrand’s disease and when there is evidence of an abnormal molecular form of factor VIII antigen. (1.3).",
"Description": "Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows: Mol. Wt. 1129.27 Molecular Formula: C46H64N14O12S2CH3COOH. 1-(3-mercaptopropanoic acid)-8-D-arginine-vasopressin monoacetate. Desmopressin acetate injection, USP is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH."
},
{
"NDCCode": "62756-014-26",
"PackageDescription": "25 g in 1 BOTTLE, GLASS (62756-014-26)",
"NDC11Code": "62756-0014-26",
"ProductNDC": "62756-014",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Lubiprostone",
"DosageFormName": "POWDER",
"StartMarketingDate": "20100114",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Sun Pharmaceutical Industries Limited",
"SubstanceName": "LUBIPROSTONE",
"StrengthNumber": "25",
"StrengthUnit": "g/25g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "46708-494-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-494-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0494-10",
"ProductNDC": "46708-494",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-494-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-494-30) ",
"NDC11Code": "46708-0494-30",
"ProductNDC": "46708-494",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-494-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-494-71) ",
"NDC11Code": "46708-0494-71",
"ProductNDC": "46708-494",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-494-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-494-90) ",
"NDC11Code": "46708-0494-90",
"ProductNDC": "46708-494",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-494-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-494-91) ",
"NDC11Code": "46708-0494-91",
"ProductNDC": "46708-494",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-495-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-495-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0495-10",
"ProductNDC": "46708-495",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-495-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-495-30) ",
"NDC11Code": "46708-0495-30",
"ProductNDC": "46708-495",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-495-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-495-71) ",
"NDC11Code": "46708-0495-71",
"ProductNDC": "46708-495",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-495-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-495-90) ",
"NDC11Code": "46708-0495-90",
"ProductNDC": "46708-495",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-495-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-495-91) ",
"NDC11Code": "46708-0495-91",
"ProductNDC": "46708-495",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-496-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-496-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0496-10",
"ProductNDC": "46708-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-496-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-496-30) ",
"NDC11Code": "46708-0496-30",
"ProductNDC": "46708-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-496-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-496-71) ",
"NDC11Code": "46708-0496-71",
"ProductNDC": "46708-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-496-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-496-90) ",
"NDC11Code": "46708-0496-90",
"ProductNDC": "46708-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-496-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-496-91) ",
"NDC11Code": "46708-0496-91",
"ProductNDC": "46708-496",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-497-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-497-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0497-10",
"ProductNDC": "46708-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-497-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-497-30) ",
"NDC11Code": "46708-0497-30",
"ProductNDC": "46708-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-497-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-497-71) ",
"NDC11Code": "46708-0497-71",
"ProductNDC": "46708-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-497-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-497-90) ",
"NDC11Code": "46708-0497-90",
"ProductNDC": "46708-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-497-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-497-91) ",
"NDC11Code": "46708-0497-91",
"ProductNDC": "46708-497",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "80",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-498-10",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (46708-498-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "46708-0498-10",
"ProductNDC": "46708-498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-498-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (46708-498-30) ",
"NDC11Code": "46708-0498-30",
"ProductNDC": "46708-498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-498-71",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (46708-498-71) ",
"NDC11Code": "46708-0498-71",
"ProductNDC": "46708-498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-498-90",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (46708-498-90) ",
"NDC11Code": "46708-0498-90",
"ProductNDC": "46708-498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "46708-498-91",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (46708-498-91) ",
"NDC11Code": "46708-0498-91",
"ProductNDC": "46708-498",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lurasidone Hydrochloride",
"NonProprietaryName": "Lurasidone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20230124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213248",
"LabelerName": "Alembic Pharmaceuticals Limited",
"SubstanceName": "LURASIDONE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2023-01-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230124",
"SamplePackage": "N",
"IndicationAndUsage": "Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].",
"Description": "Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake."
},
{
"NDCCode": "53489-529-01",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (53489-529-01)",
"NDC11Code": "53489-0529-01",
"ProductNDC": "53489-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073475",
"LabelerName": "Mutual Pharmaceutical Company, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Atenolol is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol is available as 25 mg, 50 mg, and 100 mg tablets for oral administration. Inactive ingredients are: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
},
{
"NDCCode": "53489-529-02",
"PackageDescription": "50 TABLET in 1 BOTTLE, PLASTIC (53489-529-02)",
"NDC11Code": "53489-0529-02",
"ProductNDC": "53489-529",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19930330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073475",
"LabelerName": "Mutual Pharmaceutical Company, Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Atenolol is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol is available as 25 mg, 50 mg, and 100 mg tablets for oral administration. Inactive ingredients are: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>62756-529-26</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (62756-529-26) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>62756-0529-26</NDC11Code>
<ProductNDC>62756-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desmopressin Acetate</ProprietaryName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20140220</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091280</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-01-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140220</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hemophilia A: Desmopressin Acetate Injection 4 mcg/mL is indicated for patients with hemophilia A with factor VIII coagulant activity levels greater than 5%.Desmopressin acetate injection will often maintain hemostasis in patients with hemophilia A during surgical procedures and postoperatively when administered 30 minutes prior to scheduled procedure.Desmopressin acetate injection will also stop bleeding in hemophilia A patients with episodes of spontaneous or trauma-induced injuries such as hemarthroses, intramuscular hematomas or mucosal bleeding. In certain clinical situations, it may be justified to try desmopressin acetate injection in patients with factor VIII levels between 2% to 5%; however, these patients should be carefully monitored.von Willebrand’s Disease (Type I): Desmopressin acetate injection 4 mcg/mL is indicated for patients with mild to moderate classic von Willebrand’s disease (Type I) with factor VIII levels greater than 5%. Desmopressin acetate injection will often maintain hemostasis in patients with mild to moderate von Willebrand’s disease during surgical procedures and postoperatively when administered 30 minutes prior to the scheduled procedure.Desmopressin acetate injection will usually stop bleeding in mild to moderate von Willebrand’s patients with episodes of spontaneous or trauma-induced injuries such as hemarthroses, intramuscular hematomas or mucosal bleeding.Those von Willebrand’s disease patients who are least likely to respond are those with severe homozygous von Willebrand’s disease with factor VIII coagulant activity and factor VIII von Willebrand factor antigen levels less than 1%. Other patients may respond in a variable fashion depending on the type of molecular defect they have. Bleeding time and factor VIII coagulant activity, ristocetin cofactor activity, and von Willebrand factor antigen should be checked during administration of desmopressin acetate injection to ensure that adequate levels are being achieved.Desmopressin acetate injection is not indicated for the treatment of severe classic von Willebrand’s disease (Type I) and when there is evidence of an abnormal molecular form of factor VIII antigen. (See WARNINGS.)Diabetes Insipidus: Desmopressin acetate injection 4 mcg/mL is indicated as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. Desmopressin acetate injection is ineffective for the treatment of nephrogenic diabetes insipidus.Desmopressin acetate is also available as an intranasal preparation. However, this means of delivery can be compromised by a variety of factors that can make nasal insufflation ineffective or inappropriate. These include poor intranasal absorption, nasal congestion and blockage, nasal discharge, atrophy of nasal mucosa, and severe atrophic rhinitis. Intranasal delivery may be inappropriate where there is an impaired level of consciousness. In addition, cranial surgical procedures, such as transsphenoidal hypophysectomy, create situations where an alternative route of administration is needed as in cases of nasal packing or recovery from surgery.</IndicationAndUsage>
<Description>Desmopressin acetate. injection, USP 4 mcg/mL is a synthetic analogue of the natural pituitary hormone 8-arginine vasopressin (ADH), an antidiuretic hormone affecting renal water conservation. It is chemically defined as follows:Mol. Wt. 1069.23Molecular Formula: C46H64N14O12S2. 1-(3-mercaptopropionic acid)-8-D-arginine vasopressin acetate.Desmopressin acetate. Injection, USP 4 mcg/mL is provided as a sterile, aqueous solution for injection.Each mL provides:Desmopressin acetate, USP, 4 mcgSodium chloride, 9 mgHydrochloric acid to adjust pH to 4Water for injection, q.s. to 1 mLThe 10 mL vial contains chlorobutanol as a preservative (5 mg/mL).</Description>
</NDC>
<NDC>
<NDCCode>62756-529-40</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (62756-529-40) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>62756-0529-40</NDC11Code>
<ProductNDC>62756-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Desmopressin Acetate</ProprietaryName>
<NonProprietaryName>Desmopressin Acetate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20130130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091280</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>DESMOPRESSIN ACETATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Factor VIII Activator [EPC], Increased Coagulation Factor VIII Activity [PE], Increased Coagulation Factor VIII Concentration [PE], Vasopressin Analog [EPC], Vasopressins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Desmopressin acetate injection is a vasopressin analog used for. · Central Diabetes Insipidus - as antidiuretic replacement therapy in the management of central (cranial) diabetes insipidus and for the management of the temporary polyuria and polydipsia following head trauma or surgery in the pituitary region. (1.1). · Hemophilia A- for patients with factor VIII coagulant activity levels greater than 5% to maintain hemostasis during surgical procedures and postoperatively or reduce bleeding with episodes of spontaneous or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.2). · von Willebrand’s disease (Type I) - for patients with mild to moderate disease with factor VIII levels greater than 5% to maintain hemostasis during surgical procedures or traumatic injuries such as hemarthroses, intramuscular hematomas, or mucosal bleeding. (1.3). Limitations of Use. · Desmopressin acetate is ineffective and not indicated for the treatment of nephrogenic diabetes insipidus. (1.3). von Willebrand’s disease (severe Type I) - not indicated for the treatment of patients with severe Type I von Willebrand’s disease and when there is evidence of an abnormal molecular form of factor VIII antigen. (1.3).</IndicationAndUsage>
<Description>Desmopressin acetate injection, USP is a synthetic vasopressin analog for intravenous or subcutaneous use. It is chemically defined as follows: Mol. Wt. 1129.27 Molecular Formula: C46H64N14O12S2CH3COOH. 1-(3-mercaptopropanoic acid)-8-D-arginine-vasopressin monoacetate. Desmopressin acetate injection, USP is a sterile solution in a 10 mL multiple-dose vial: Each mL contains 4 mcg of desmopressin acetate, USP which is equivalent to 3.6 mcg of desmopressin free base. The inactive ingredients are sodium chloride, chlorobutanol (5 mg per mL), hydrochloric acid and water for injection. Sodium chloride is used to adjust tonicity. Hydrochloric acid is used to adjust pH.</Description>
</NDC>
<NDC>
<NDCCode>62756-014-26</NDCCode>
<PackageDescription>25 g in 1 BOTTLE, GLASS (62756-014-26)</PackageDescription>
<NDC11Code>62756-0014-26</NDC11Code>
<ProductNDC>62756-014</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Lubiprostone</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20100114</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Sun Pharmaceutical Industries Limited</LabelerName>
<SubstanceName>LUBIPROSTONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>g/25g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>46708-494-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-494-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0494-10</NDC11Code>
<ProductNDC>46708-494</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-494-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-494-30) </PackageDescription>
<NDC11Code>46708-0494-30</NDC11Code>
<ProductNDC>46708-494</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-494-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-494-71) </PackageDescription>
<NDC11Code>46708-0494-71</NDC11Code>
<ProductNDC>46708-494</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-494-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-494-90) </PackageDescription>
<NDC11Code>46708-0494-90</NDC11Code>
<ProductNDC>46708-494</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-494-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-494-91) </PackageDescription>
<NDC11Code>46708-0494-91</NDC11Code>
<ProductNDC>46708-494</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-495-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-495-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0495-10</NDC11Code>
<ProductNDC>46708-495</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-495-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-495-30) </PackageDescription>
<NDC11Code>46708-0495-30</NDC11Code>
<ProductNDC>46708-495</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-495-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-495-71) </PackageDescription>
<NDC11Code>46708-0495-71</NDC11Code>
<ProductNDC>46708-495</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-495-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-495-90) </PackageDescription>
<NDC11Code>46708-0495-90</NDC11Code>
<ProductNDC>46708-495</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-495-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-495-91) </PackageDescription>
<NDC11Code>46708-0495-91</NDC11Code>
<ProductNDC>46708-495</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-496-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-496-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0496-10</NDC11Code>
<ProductNDC>46708-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-496-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-496-30) </PackageDescription>
<NDC11Code>46708-0496-30</NDC11Code>
<ProductNDC>46708-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-496-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-496-71) </PackageDescription>
<NDC11Code>46708-0496-71</NDC11Code>
<ProductNDC>46708-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-496-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-496-90) </PackageDescription>
<NDC11Code>46708-0496-90</NDC11Code>
<ProductNDC>46708-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-496-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-496-91) </PackageDescription>
<NDC11Code>46708-0496-91</NDC11Code>
<ProductNDC>46708-496</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-497-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-497-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0497-10</NDC11Code>
<ProductNDC>46708-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-497-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-497-30) </PackageDescription>
<NDC11Code>46708-0497-30</NDC11Code>
<ProductNDC>46708-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-497-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-497-71) </PackageDescription>
<NDC11Code>46708-0497-71</NDC11Code>
<ProductNDC>46708-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-497-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-497-90) </PackageDescription>
<NDC11Code>46708-0497-90</NDC11Code>
<ProductNDC>46708-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-497-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-497-91) </PackageDescription>
<NDC11Code>46708-0497-91</NDC11Code>
<ProductNDC>46708-497</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>80</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-498-10</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (46708-498-10) / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>46708-0498-10</NDC11Code>
<ProductNDC>46708-498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-498-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-498-30) </PackageDescription>
<NDC11Code>46708-0498-30</NDC11Code>
<ProductNDC>46708-498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-498-71</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (46708-498-71) </PackageDescription>
<NDC11Code>46708-0498-71</NDC11Code>
<ProductNDC>46708-498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-498-90</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-498-90) </PackageDescription>
<NDC11Code>46708-0498-90</NDC11Code>
<ProductNDC>46708-498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>46708-498-91</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (46708-498-91) </PackageDescription>
<NDC11Code>46708-0498-91</NDC11Code>
<ProductNDC>46708-498</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lurasidone Hydrochloride</ProprietaryName>
<NonProprietaryName>Lurasidone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213248</ApplicationNumber>
<LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
<SubstanceName>LURASIDONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-01-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lurasidone hydrochloride tablets are indicated for: 1 Monotherapy treatment of adult and pediatric patients (10 to 17 years) with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)]., 2 Adjunctive treatment with lithium or valproate in adult patients with major depressive episode associated with bipolar I disorder (bipolar depression) [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>Lurasidone hydrochloride is an atypical antipsychotic belonging to the chemical class of benzisothiazol derivatives. Its chemical name is (3aR,4S,7R,7aS)-2-{(1R,2R)-2-[4-(1,2-benzisothiazol-3-yl)piperazin-1 ylmethyl] cyclohexylmethyl}hexahydro-4,7-methano-2H-isoindole-1,3-dione hydrochloride. Its molecular formula is C28H36N4O2S·HCl and its molecular weight is 529.14. The chemical structure is. Lurasidone hydrochloride is a white to cream powder. It is very slightly soluble to insoluble in water, sparingly soluble in methanol. Practically insoluble in toluene. Lurasidone hydrochloride tablets are intended for oral administration only. Each tablet contains 20 mg, 40 mg, 60 mg, 80 mg or 120 mg of lurasidone hydrochloride. Inactive ingredients are mannitol, corn starch, croscarmellose sodium, hypromellose and magnesium stearate. The tablets are film-coated with coating material containing hypromellose, titanium dioxide and polyethylene glycol 8000. Additionally, the 80 mg tablet contains iron oxide yellow and FD&C Blue No. 2 Aluminum Lake.</Description>
</NDC>
<NDC>
<NDCCode>53489-529-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (53489-529-01)</PackageDescription>
<NDC11Code>53489-0529-01</NDC11Code>
<ProductNDC>53489-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073475</ApplicationNumber>
<LabelerName>Mutual Pharmaceutical Company, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol is available as 25 mg, 50 mg, and 100 mg tablets for oral administration. Inactive ingredients are: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>53489-529-02</NDCCode>
<PackageDescription>50 TABLET in 1 BOTTLE, PLASTIC (53489-529-02)</PackageDescription>
<NDC11Code>53489-0529-02</NDC11Code>
<ProductNDC>53489-529</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19930330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073475</ApplicationNumber>
<LabelerName>Mutual Pharmaceutical Company, Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4-[2'-hydroxy-3'-[(1-methylethyl) amino] propoxy]-. The molecular and structural formulas are. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol is available as 25 mg, 50 mg, and 100 mg tablets for oral administration. Inactive ingredients are: magnesium stearate, microcrystalline cellulose, povidone, and sodium starch glycolate.</Description>
</NDC>
</NDCList>