RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>62935-756-80</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (62935-756-80)  / .25 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>62935-0756-80</NDC11Code>
    <ProductNDC>62935-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20231101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021343</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/.25mL</StrengthUnit>
    <Pharm_Classes>Gonadotropin Releasing Hormone Receptor Agonist [EPC], Gonadotropin Releasing Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD is indicated for the treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four, or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD is supplied as a pre-connected syringe system comprised of two prefilled syringes (syringe A and syringe B) connected using a coupling device.  Immediately prior to administration, the contents of the pre-connected syringe system are mixed until homogenous.  ELIGARD is administered subcutaneously, where it forms a solid drug delivery depot. Syringe A contains the in situ polymeric extended release technology consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP) and syringe B contains leuprolide acetate. Refer to Table 5 for the delivery system composition and reconstituted product formulation for each ELIGARD product. Table 5.  ELIGARD Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>12634-756-80</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (12634-756-80)</PackageDescription>
    <NDC11Code>12634-0756-80</NDC11Code>
    <ProductNDC>12634-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metformin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20110131</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091184</ApplicationNumber>
    <LabelerName>Apotheca Inc.</LabelerName>
    <SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-08-02</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Metformin hydrochloride tablets USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults and children with type 2 diabetes mellitus.</IndicationAndUsage>
    <Description>Metformin hydrochloride tablets USP are oral antihyperglycemic drug used in the management of type 2 diabetes. Metformin hydrochloride ( N,N-­dimethylimidodicarbonimidic diamide hydrochloride) is not chemically or pharmacologically related to any other classes of oral antihyperglycemic agents. The structural formula is as shown:. Metformin hydrochloride USP is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5  HCl and a molecular weight of 165.63. Metformin hydrochloride is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK a of metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride tablets USP contain 500 mg, 850 mg, or 1000 mg of metformin hydrochloride USP. Each tablet contains the inactive ingredients corn starch, povidone and magnesium stearate. In addition, the coating for each tablet contains hypromellose, talc, titanium dioxide, polyethylene glycol, and propylene glycol.</Description>
  </NDC>
  <NDC>
    <NDCCode>41250-756-31</NDCCode>
    <PackageDescription>80 TABLET, COATED in 1 BOTTLE, PLASTIC (41250-756-31) </PackageDescription>
    <NDC11Code>41250-0756-31</NDC11Code>
    <ProductNDC>41250-756</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Pain Relief Pm</ProprietaryName>
    <NonProprietaryName>Acetaminophen, Diphenhydramine Hcl</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200818</StartMarketingDate>
    <EndMarketingDate>20251205</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M013</ApplicationNumber>
    <LabelerName>Meijer Distribution Inc</LabelerName>
    <SubstanceName>ACETAMINOPHEN; DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>500; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20200818</StartMarketingDatePackage>
    <EndMarketingDatePackage>20251205</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporary relief of occasional headaches and minor aches and pains with accompanying sleeplessness.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>43353-756-80</NDCCode>
    <PackageDescription>180 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (43353-756-80)</PackageDescription>
    <NDC11Code>43353-0756-80</NDC11Code>
    <ProductNDC>43353-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20070406</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA086242</ApplicationNumber>
    <LabelerName>Aphena Pharma Solutions - Tennessee, LLC</LabelerName>
    <SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Arteriolar Vasodilation [PE],Arteriolar Vasodilator [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-01-01</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Essential hypertension, alone or as an adjunct.</IndicationAndUsage>
    <Description>HydrALAZINE hydrochloride, USP, is an antihypertensive, for oral administration. Its chemical name is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. HydrALAZINE hydrochloride, USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition, and has a molecular weight of 196.64. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, or 100 mg hydrALAZINE hydrochloride, USP. Tablets also contain FD&amp;C Red #40/Allura Red AC Aluminum Lake, hypromellose, lactose anhydrous, light mineral oil, microcrystalline cellulose, magnesium stearate, pregelatinized starch, sodium lauryl sulfate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>60687-756-09</NDCCode>
    <PackageDescription>80 BLISTER PACK in 1 CARTON (60687-756-09)  / 1 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (60687-756-11) </PackageDescription>
    <NDC11Code>60687-0756-09</NDC11Code>
    <ProductNDC>60687-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Potassium Chloride</ProprietaryName>
    <NonProprietaryName>Potassium Chloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240126</StartMarketingDate>
    <EndMarketingDate>20261231</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075604</ApplicationNumber>
    <LabelerName>American Health Packaging</LabelerName>
    <SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>meq/1</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-06-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20240126</StartMarketingDatePackage>
    <EndMarketingDatePackage>20261231</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED-RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, eg, digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
    <Description>The Potassium Chloride Extended-Release Tablets, USP 20 mEq product is an immediately dispersing extended-release oral dosage form of potassium chloride containing 1500 mg of microencapsulated potassium chloride, USP equivalent to 20 mEq of potassium in a tablet. The Potassium Chloride Extended-Release Tablets, USP 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium chloride is an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium chloride is a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, potassium chloride tablets begin disintegrating into microencapsulated crystals within seconds and completely disintegrate within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>16714-756-01</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (16714-756-01) </PackageDescription>
    <NDC11Code>16714-0756-01</NDC11Code>
    <ProductNDC>16714-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atomoxetine</ProprietaryName>
    <NonProprietaryName>Atomoxetine</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180601</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079019</ApplicationNumber>
    <LabelerName>Northstar Rx LLC</LabelerName>
    <SubstanceName>ATOMOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>18</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Norepinephrine Reuptake Inhibitor [EPC], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-09-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atomoxetine capsules are indicated for the treatment of attention-deficit/hyperactivity disorder (ADHD) in adults and pediatric patients 6 years of age and older. Atomoxetine capsules is indicated as an integral part of a total treatment program for ADHD that may include other measures (psychological, educational, social) for patients with ADHD.</IndicationAndUsage>
    <Description>Atomoxetine is a selective norepinephrine reuptake inhibitor. Atomoxetine hydrochloride, USP is the R(-) isomer as. determined by x-ray diffraction. and its chemical designation is (-)-N-Methyl-3-phenyl-3-(o-tolyloxy)-propylamine. hydrochloride and its molecular formula is C17H21NOHCl, which corresponds to a molecular weight of 291.82. The chemical structure is. Atomoxetine hydrochloride, USP is a white to off-white crystalline powder; sparingly soluble in water. Atomoxetine Capsules, USP are for oral administration only. Each capsule contains atomoxetine hydrochloride USP equivalent to 10 mg, 18 mg, 25 mg, 40 mg, 60 mg, 80 mg. or 100 mg of atomoxetine. The capsules also contain pregelatinized starch. The capsule shell for Atomoxetine Capsules, USP 10 mg contains gelatin, and titanium dioxide. The capsule shell for Atomoxetine Capsules, USP 18 mg contains D&amp;C Yellow No. 10, FD&amp;C Yellow No. 6, gelatin. sodium lauryl sulfate, and titanium dioxide. The capsule shell for Atomoxetine Capsules, USP 25 mg and 40 mg contains D&amp;C Red No. 28, FD&amp;C Blue No.1. gelatin, and titanium dioxide. The capsule shell for Atomoxetine Capsules, USP 60 mg contains D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, FD&amp;C Red. No. 3, FD&amp;C Yellow No. 6, gelatin, sodium lauryl sulfate, and titanium dioxide. The capsule shell for Atomoxetine Capsules, USP 80 mg and 100 mg contains D&amp;C Red No. 28, D&amp;C Yellow No. 10, FD&amp;C Blue No. 1, gelatin, and titanium dioxide. The imprinting ink for Atomoxetine Capsules, USP 10 mg, 25 mg, 40 mg, 80 mg and 100 mg has the following. components: black iron oxide, D&amp;C Yellow No. 10, FD&amp;C Blue No. 2, FD&amp;C Blue No. 1, FD&amp;C Red No. 40. propylene glycol, and shellac. The imprinting ink for Atomoxetine Capsules, USP 18 mg and 60 mg has the following components: black iron. oxide, propylene glycol, potassium hydroxide, strong ammonia solution, and shellac.</Description>
  </NDC>
  <NDC>
    <NDCCode>21695-407-01</NDCCode>
    <PackageDescription>6 DIALPACK in 1 CARTON (21695-407-01)  &gt; 1 KIT in 1 DIALPACK</PackageDescription>
    <NDC11Code>21695-0407-01</NDC11Code>
    <ProductNDC>21695-407</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Trinessa</ProprietaryName>
    <NonProprietaryName>Norgestimate And Ethinyl Estradiol</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20070817</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019697</ApplicationNumber>
    <LabelerName>Rebel Distributors Corp</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>TriNessa® is indicated for the prevention of pregnancy in women who elect to use oral contraceptives as a method of contraception. TriNessa is indicated for the treatment of moderate acne vulgaris in females at least 15 years of age, who have no known contraindications to oral contraceptive therapy, and have achieved menarche. TriNessa should be used for the treatment of acne only if the patient desires an oral contraceptive for birth control. Oral contraceptives are highly effective for pregnancy prevention. Table II lists the typical accidental pregnancy rates for users of combination oral contraceptives and other methods of contraception. The efficacy of these contraceptive methods, except sterilization, the IUD, and the Norplant System depends upon the reliability with which they are used. Correct and consistent use of methods can result in lower failure rates. TriNessa has not been studied for and is not indicated for use in emergency contraception. In four clinical trials with TriNessa, a total of 4,756 subjects completed 45,244 cycles, and the use-efficacy pregnancy rate was approximately 1 pregnancy per 100 womenyears. TriNessa was evaluated for the treatment of acne vulgaris in two randomized, double-blind, placebo-controlled, multicenter, Phase 3, six (28 day) cycle studies.221 patients received TriNessa and 234 patients received placebo. Mean age at enrollment for both groups was 28 years. At the end of 6 months, the mean total lesion count changes from 55 to 31 (42% reduction) in patients treated with TriNessa and from 54 to 38 (27% reduction) in patients similarly treated with placebo.Table III summarizes the changes in lesion count for each type of lesion in the ITT population. Based on the investigator’s global assessment conducted at the final visit, patients treated with TriNessa showed a statistically significant improvement in total lesions compared to those treated with placebo.</IndicationAndUsage>
    <Description>The following product is a combination oral contraceptive containing the progestational compound norgestimate and the estrogenic compound ethinyl estradiol. TriNessa® Tablets. Each white tablet contains 0.180 mg of the progestational compound, norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-, oxime,(17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, purified water and titanium dioxide. Each light blue tablet contains 0.215 mg of the progestational compound norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one,17-(acetyloxy)-13-ethyl-,oxime, (17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include FD &amp; C Blue No.2 Aluminum Lake, carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, purified water and titanium dioxide. Each blue tablet contains 0.250 mg of the progestational compound norgestimate (18,19-Dinor-17-pregn-4-en-20-yn-3-one, 17-(acetyloxy)-13-ethyl-,oxime,(17α)-(+)-) and 0.035 mg of the estrogenic compound, ethinyl estradiol (19-nor-17α-pregna,1,3,5(10)-trien-20-yne-3,17-diol). Inactive ingredients include FD &amp; C Blue No.2 Aluminum Lake, carnauba wax, croscarmellose sodium, hypromellose, lactose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, purified water and titanium dioxide. Each dark green tablet contains only inert ingredients, as follows: FD &amp; C Blue No. 2 Aluminum Lake, ferric oxide, hypromellose, lactose, magnesium stearate, polyethylene glycol, pregelatinized corn starch, purified water, talc and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-756-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (46708-756-30) </PackageDescription>
    <NDC11Code>46708-0756-30</NDC11Code>
    <ProductNDC>46708-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amlodipine And Atorvastatin</ProprietaryName>
    <NonProprietaryName>Amlodipine And Atorvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217279</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
    <StrengthNumber>2.5; 20</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amlodipine and atorvastatin tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.AmlodipineHypertension Amlodipine is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine may be used alone or in combination with other antihypertensive agents.Coronary Artery Disease (CAD)Chronic Stable Angina Amlodipine is indicated for the symptomatic treatment of chronic stable angina. Amlodipine may be used alone or in combination with other antianginal agents.Vasospastic Angina (Prinzmetal’s or Variant Angina) Amlodipine is indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine may be used as monotherapy or in combination with other antianginal agents.Angiographically Documented CAD In patients with recently documented CAD by angiography and without heart failure or an ejection fraction &lt; 40%, amlodipine is indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.Atorvastatin  Atorvastatin is indicated:   To reduce the risk of:          o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD          o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD           o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD   As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:          o Adults with primary hyperlipidemia.           o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).   As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH).   As an adjunct to diet for the treatment of adults with:          o Primary dysbetalipoproteinemia          o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Amlodipine and atorvastatin tablets, USP combine the calcium channel blocker amlodipine besylate, USP with the HMG-CoA-reductase inhibitor atorvastatin calcium, USP. Amlodipine besylate, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro­ 6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S. Atorvastatin calcium, USP is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl­4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34FN2O5)2Ca3H2O. The structural formulae for amlodipine besylate, USP and atorvastatin calcium, USP are shown below. Amlodipine besylate. Atorvastatin calcium. Amlodipine and atorvastatin tablets, USP contain amlodipine besylate, USP, a white or almost white powder, and atorvastatin calcium, USP, a white to off-white powder. Amlodipine besylate, USP has a molecular weight of 567.1 and atorvastatin calcium, USP has a molecular weight of 1209.42. Amlodipine besylate, USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Atorvastatin calcium, USP is freely soluble in methanol, slightly soluble in ethanol, very slightly soluble in water and in pH 7.4 phosphate buffer, insoluble in aqueous solution of pH 4 and in acetonitrile. Amlodipine and atorvastatin tablets, USP are available as film-coated tablets for oral administration containing.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP. Each film-coated tablet also contains calcium carbonate, colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 3000, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Additionally 10 mg/10 mg, 10 mg/20 mg, 10 mg/40 mg and 10 mg/80 mg also contains FD&amp;C Blue #2 Aluminum Lake. Amlodipine and atorvastatin tablets, USP meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-756-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (46708-756-90) </PackageDescription>
    <NDC11Code>46708-0756-90</NDC11Code>
    <ProductNDC>46708-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amlodipine And Atorvastatin</ProprietaryName>
    <NonProprietaryName>Amlodipine And Atorvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217279</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
    <StrengthNumber>2.5; 20</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amlodipine and atorvastatin tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.AmlodipineHypertension Amlodipine is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine may be used alone or in combination with other antihypertensive agents.Coronary Artery Disease (CAD)Chronic Stable Angina Amlodipine is indicated for the symptomatic treatment of chronic stable angina. Amlodipine may be used alone or in combination with other antianginal agents.Vasospastic Angina (Prinzmetal’s or Variant Angina) Amlodipine is indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine may be used as monotherapy or in combination with other antianginal agents.Angiographically Documented CAD In patients with recently documented CAD by angiography and without heart failure or an ejection fraction &lt; 40%, amlodipine is indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.Atorvastatin  Atorvastatin is indicated:   To reduce the risk of:          o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD          o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD           o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD   As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:          o Adults with primary hyperlipidemia.           o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).   As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH).   As an adjunct to diet for the treatment of adults with:          o Primary dysbetalipoproteinemia          o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Amlodipine and atorvastatin tablets, USP combine the calcium channel blocker amlodipine besylate, USP with the HMG-CoA-reductase inhibitor atorvastatin calcium, USP. Amlodipine besylate, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro­ 6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S. Atorvastatin calcium, USP is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl­4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34FN2O5)2Ca3H2O. The structural formulae for amlodipine besylate, USP and atorvastatin calcium, USP are shown below. Amlodipine besylate. Atorvastatin calcium. Amlodipine and atorvastatin tablets, USP contain amlodipine besylate, USP, a white or almost white powder, and atorvastatin calcium, USP, a white to off-white powder. Amlodipine besylate, USP has a molecular weight of 567.1 and atorvastatin calcium, USP has a molecular weight of 1209.42. Amlodipine besylate, USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Atorvastatin calcium, USP is freely soluble in methanol, slightly soluble in ethanol, very slightly soluble in water and in pH 7.4 phosphate buffer, insoluble in aqueous solution of pH 4 and in acetonitrile. Amlodipine and atorvastatin tablets, USP are available as film-coated tablets for oral administration containing.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP. Each film-coated tablet also contains calcium carbonate, colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 3000, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Additionally 10 mg/10 mg, 10 mg/20 mg, 10 mg/40 mg and 10 mg/80 mg also contains FD&amp;C Blue #2 Aluminum Lake. Amlodipine and atorvastatin tablets, USP meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-756-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (62332-756-30) </PackageDescription>
    <NDC11Code>62332-0756-30</NDC11Code>
    <ProductNDC>62332-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amlodipine And Atorvastatin</ProprietaryName>
    <NonProprietaryName>Amlodipine And Atorvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217279</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
    <StrengthNumber>2.5; 20</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amlodipine and atorvastatin tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.AmlodipineHypertension Amlodipine is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine may be used alone or in combination with other antihypertensive agents.Coronary Artery Disease (CAD)Chronic Stable Angina Amlodipine is indicated for the symptomatic treatment of chronic stable angina. Amlodipine may be used alone or in combination with other antianginal agents.Vasospastic Angina (Prinzmetal’s or Variant Angina) Amlodipine is indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine may be used as monotherapy or in combination with other antianginal agents.Angiographically Documented CAD In patients with recently documented CAD by angiography and without heart failure or an ejection fraction &lt; 40%, amlodipine is indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.Atorvastatin  Atorvastatin is indicated:   To reduce the risk of:          o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD          o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD           o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD   As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:          o Adults with primary hyperlipidemia.           o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).   As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH).   As an adjunct to diet for the treatment of adults with:          o Primary dysbetalipoproteinemia          o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Amlodipine and atorvastatin tablets, USP combine the calcium channel blocker amlodipine besylate, USP with the HMG-CoA-reductase inhibitor atorvastatin calcium, USP. Amlodipine besylate, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro­ 6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S. Atorvastatin calcium, USP is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl­4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34FN2O5)2Ca3H2O. The structural formulae for amlodipine besylate, USP and atorvastatin calcium, USP are shown below. Amlodipine besylate. Atorvastatin calcium. Amlodipine and atorvastatin tablets, USP contain amlodipine besylate, USP, a white or almost white powder, and atorvastatin calcium, USP, a white to off-white powder. Amlodipine besylate, USP has a molecular weight of 567.1 and atorvastatin calcium, USP has a molecular weight of 1209.42. Amlodipine besylate, USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Atorvastatin calcium, USP is freely soluble in methanol, slightly soluble in ethanol, very slightly soluble in water and in pH 7.4 phosphate buffer, insoluble in aqueous solution of pH 4 and in acetonitrile. Amlodipine and atorvastatin tablets, USP are available as film-coated tablets for oral administration containing.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP. Each film-coated tablet also contains calcium carbonate, colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 3000, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Additionally 10 mg/10 mg, 10 mg/20 mg, 10 mg/40 mg and 10 mg/80 mg also contains FD&amp;C Blue #2 Aluminum Lake. Amlodipine and atorvastatin tablets, USP meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-756-90</NDCCode>
    <PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (62332-756-90) </PackageDescription>
    <NDC11Code>62332-0756-90</NDC11Code>
    <ProductNDC>62332-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amlodipine And Atorvastatin</ProprietaryName>
    <NonProprietaryName>Amlodipine And Atorvastatin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250523</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA217279</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>AMLODIPINE BESYLATE; ATORVASTATIN CALCIUM TRIHYDRATE</SubstanceName>
    <StrengthNumber>2.5; 20</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC], Cytochrome P450 3A Inhibitors [MoA], Dihydropyridine Calcium Channel Blocker [EPC], Dihydropyridines [CS], HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250523</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amlodipine and atorvastatin tablets are indicated in patients for whom treatment with both amlodipine and atorvastatin is appropriate.AmlodipineHypertension Amlodipine is indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including amlodipine. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than one drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program’s Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Amlodipine may be used alone or in combination with other antihypertensive agents.Coronary Artery Disease (CAD)Chronic Stable Angina Amlodipine is indicated for the symptomatic treatment of chronic stable angina. Amlodipine may be used alone or in combination with other antianginal agents.Vasospastic Angina (Prinzmetal’s or Variant Angina) Amlodipine is indicated for the treatment of confirmed or suspected vasospastic angina. Amlodipine may be used as monotherapy or in combination with other antianginal agents.Angiographically Documented CAD In patients with recently documented CAD by angiography and without heart failure or an ejection fraction &lt; 40%, amlodipine is indicated to reduce the risk of hospitalization for angina and to reduce the risk of a coronary revascularization procedure.Atorvastatin  Atorvastatin is indicated:   To reduce the risk of:          o Myocardial infarction (MI), stroke, revascularization procedures, and angina in adults with multiple risk factors for coronary heart disease (CHD) but without clinically evident CHD          o MI and stroke in adults with type 2 diabetes mellitus with multiple risk factors for CHD but without clinically evident CHD           o Non-fatal MI, fatal and non-fatal stroke, revascularization procedures, hospitalization for congestive heart failure, and angina in adults with clinically evident CHD   As an adjunct to diet to reduce low-density lipoprotein cholesterol (LDL-C) in:          o Adults with primary hyperlipidemia.           o Adults and pediatric patients aged 10 years and older with heterozygous familial hypercholesterolemia (HeFH).   As an adjunct to other LDL-C-lowering therapies, or alone if such treatments are unavailable, to reduce LDL-C in adults and pediatric patients aged 10 years and older with homozygous familial hypercholesterolemia (HoFH).   As an adjunct to diet for the treatment of adults with:          o Primary dysbetalipoproteinemia          o Hypertriglyceridemia.</IndicationAndUsage>
    <Description>Amlodipine and atorvastatin tablets, USP combine the calcium channel blocker amlodipine besylate, USP with the HMG-CoA-reductase inhibitor atorvastatin calcium, USP. Amlodipine besylate, USP is chemically described as 3-ethyl-5-methyl (±)-2-[(2-aminoethoxy)methyl]-4-(o-chlorophenyl)-1,4-dihydro­ 6-methyl-3,5-pyridinedicarboxylate, monobenzenesulphonate. Its empirical formula is C20H25ClN2O5C6H6O3S. Atorvastatin calcium, USP is chemically described as [R-(R*, R*)]-2-(4-fluorophenyl)-ß, δ-dihydroxy-5-(1-methylethyl)-3-phenyl­4-[(phenylamino)carbonyl]-1H-pyrrole-1-heptanoic acid, calcium salt (2:1) trihydrate. Its empirical formula is (C33H34FN2O5)2Ca3H2O. The structural formulae for amlodipine besylate, USP and atorvastatin calcium, USP are shown below. Amlodipine besylate. Atorvastatin calcium. Amlodipine and atorvastatin tablets, USP contain amlodipine besylate, USP, a white or almost white powder, and atorvastatin calcium, USP, a white to off-white powder. Amlodipine besylate, USP has a molecular weight of 567.1 and atorvastatin calcium, USP has a molecular weight of 1209.42. Amlodipine besylate, USP is freely soluble in methanol, sparingly soluble in ethanol, slightly soluble in 2-propanol and in water. Atorvastatin calcium, USP is freely soluble in methanol, slightly soluble in ethanol, very slightly soluble in water and in pH 7.4 phosphate buffer, insoluble in aqueous solution of pH 4 and in acetonitrile. Amlodipine and atorvastatin tablets, USP are available as film-coated tablets for oral administration containing.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  2.5 mg amlodipine equivalent to 3.5 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  5 mg amlodipine equivalent to 6.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 10 mg atorvastatin equivalent to 10.3 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 20 mg atorvastatin equivalent to 20.7 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 40 mg atorvastatin equivalent to 41.4 mg atorvastatin  calcium, USP.  10 mg amlodipine equivalent to 13.9 mg amlodipine besylate, USP and 80 mg atorvastatin equivalent to 82.7 mg atorvastatin  calcium, USP. Each film-coated tablet also contains calcium carbonate, colloidal silicon dioxide, croscarmellose sodium, hydroxypropyl cellulose, magnesium stearate, microcrystalline cellulose, polyethylene glycol 3000, polysorbate 80, polyvinyl alcohol, pregelatinized starch, talc and titanium dioxide. Additionally 10 mg/10 mg, 10 mg/20 mg, 10 mg/40 mg and 10 mg/80 mg also contains FD&amp;C Blue #2 Aluminum Lake. Amlodipine and atorvastatin tablets, USP meets USP Dissolution Test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>70934-756-30</NDCCode>
    <PackageDescription>30 TABLET, COATED in 1 BOTTLE, PLASTIC (70934-756-30) </PackageDescription>
    <NDC11Code>70934-0756-30</NDC11Code>
    <ProductNDC>70934-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Methocarbamol</ProprietaryName>
    <NonProprietaryName>Methocarbamol Tablets</NonProprietaryName>
    <DosageFormName>TABLET, COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200529</StartMarketingDate>
    <EndMarketingDate>20260331</EndMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209312</ApplicationNumber>
    <LabelerName>Denton Pharma, Inc. dba Northwind Pharmaceuticals</LabelerName>
    <SubstanceName>METHOCARBAMOL</SubstanceName>
    <StrengthNumber>750</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20220503</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Methocarbamol tablets, USP are indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of methocarbamol has not been clearly identified, but may be related to its sedative properties. Methocarbamol does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
    <Description>Methocarbamol tablet, USP, a carbamate derivative of guaifenesin, is a central nervous system (CNS) depressant with sedative and musculoskeletal relaxant properties. The chemical name of methocarbamol is 1,2-Propanediol,3-(2-methoxyphenoxy)-,1-Carbamate,(±)-.(or) (±)-3-(o-Methoxyphenoxy)-1,2-Propanediol 1-carbamate and has the empirical formula C11H15NO5. Its molecular weight is 241.24g/mol. The structural formula is shown below. Methocarbamol is a white powder, sparingly soluble in water and in chloroform, soluble in alcohol (only with heating), insoluble in benzene and in n-hexane. Methocarbamol tablets, USP are available as 500 mg and 750 mg tablets for oral administration. Methocarbamol tablets, USP 500 mg are light orange colored, round shaped film coated tablets debossed with "G" above the score line on one side and "500" on other side. Methocarbamol tablets, USP 750 mg are light orange colored, caplet shaped film coated tablets debossed with "G" on one side and "750" on other side. Methocarbamol tablets, USP 500 mg and 750 mg contain the following inactive ingredients: colloidal silicon dioxide, maize starch, povidone, sodium lauryl sulfate, sodium starch glycolate, and stearic acid. The tabets are coated with Aquarius Prime which contains FD&amp;C yellow 6, hydroxypropylcellulose, hypromellose, polysorbate 80, propylene glycol, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-153-50</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-153-50)  *  .375 mL in 1 SYRINGE (62935-154-50)  *  .375 mL in 1 SYRINGE (62935-155-40) </PackageDescription>
    <NDC11Code>62935-0153-50</NDC11Code>
    <ProductNDC>62935-153</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fensolvi</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20200603</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213150</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2023-12-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200603</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FENSOLVI is indicated for the treatment of pediatric patients 2 years of age and older with central precocious puberty (CPP).</IndicationAndUsage>
    <Description>FENSOLVI for injectable suspension is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous use. It is designed to deliver leuprolide acetate at a controlled rate over a six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone. The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. FENSOLVI is prefilled and supplied in two separate, sterile syringes whose contents are mixed immediately prior to administration. The two syringes are joined and the single dose product is mixed until it is homogenous. FENSOLVI is administered subcutaneously, where it forms a solid drug delivery depot. One syringe contains the ATRIGEL Delivery System and the other contains the leuprolide acetate. ATRIGEL is a polymeric (non-gelatin containing) delivery system consisting of a biodegradable poly(DL-lactide-co-glycolide) (PLG) polymer formulation dissolved in the biocompatible solvent, N-methyl-2-pyrrolidone (NMP). Refer to Table 3 for the delivery system composition and reconstituted product formulation for FENSOLVI product. Table 3: FENSOLVI Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-163-60</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (62935-163-60)  / .375 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>62935-0163-60</NDC11Code>
    <ProductNDC>62935-163</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fensolvi</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230306</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213150</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.375mL</StrengthUnit>
    <Pharm_Classes>Gonadotropin Releasing Hormone Receptor Agonist [EPC], Gonadotropin Releasing Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-26</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230306</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>FENSOLVI® is indicated for the treatment of pediatric patients 2 years of age and older with central precocious puberty (CPP).</IndicationAndUsage>
    <Description>FENSOLVI for injectable suspension is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous use. It is designed to deliver leuprolide acetate at a controlled rate over a six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone. The analog possesses greater potency than the natural hormone. The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. FENSOLVI is supplied as a pre-connected syringe system.  Immediately prior to administration, the content of the pre-connected syringe system are mixed until homogenous. FENSOLVI is administered subcutaneously, where it forms a solid drug delivery depot. Syringe A contains the in situ polymeric extended release technology consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2pyrrolidone (NMP) and syringe B contains the leuprolide acetate. Refer to Table 2 for the delivery system composition and reconstituted product formulation for FENSOLVI product. Table 2: FENSOLVI Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-222-05</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-222-05)  *  .375 mL in 1 SYRINGE (62935-220-04)  *  .375 mL in 1 SYRINGE (62935-225-05) </PackageDescription>
    <NDC11Code>62935-0222-05</NDC11Code>
    <ProductNDC>62935-222</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20020826</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021379</ApplicationNumber>
    <LabelerName>TOLMAR PHARMACEUTICALS INC.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2019-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020826</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62935-223-05</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-223-05)  *  .375 mL in 1 SYRINGE (62935-221-04)  *  .375 mL in 1 SYRINGE (62935-224-05) </PackageDescription>
    <NDC11Code>62935-0223-05</NDC11Code>
    <ProductNDC>62935-223</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20020826</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021379</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020826</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD® is indicated for the palliative treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD® is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four- or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD® is prefilled and supplied in two separate, sterile syringes whose contents are mixed immediately prior to administration.  The two syringes are joined and the single dose product is mixed until it is homogenous.  ELIGARD® is administered subcutaneously, where it forms a solid drug delivery depot. One syringe contains the ATRIGEL® Delivery System and the other contains leuprolide acetate.  ATRIGEL® is a polymeric (non-gelatin containing) delivery system consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP). Refer to Table 6 for the delivery system composition and reconstituted product formulation for each ELIGARD® product. Table 6.  ELIGARD® Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-227-10</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (62935-227-10)  / .375 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>62935-0227-10</NDC11Code>
    <ProductNDC>62935-227</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20231127</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021379</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
    <StrengthNumber>22.5</StrengthNumber>
    <StrengthUnit>mg/.375mL</StrengthUnit>
    <Pharm_Classes>Gonadotropin Releasing Hormone Receptor Agonist [EPC], Gonadotropin Releasing Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20231127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD is indicated for the treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four, or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD is supplied as a pre-connected syringe system comprised of two prefilled syringes (syringe A and syringe B) connected using a coupling device.  Immediately prior to administration, the contents of the pre-connected syringe system are mixed until homogenous.  ELIGARD is administered subcutaneously, where it forms a solid drug delivery depot. Syringe A contains the in situ polymeric extended release technology consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP) and syringe B contains leuprolide acetate. Refer to Table 5 for the delivery system composition and reconstituted product formulation for each ELIGARD product. Table 5.  ELIGARD Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-302-30</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-302-30)  *  .5 mL in 1 SYRINGE (62935-301-29)  *  .5 mL in 1 SYRINGE (62935-300-30) </PackageDescription>
    <NDC11Code>62935-0302-30</NDC11Code>
    <ProductNDC>62935-302</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20030226</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021488</ApplicationNumber>
    <LabelerName>TOLMAR PHARMACEUTICALS INC.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2019-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62935-303-30</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-303-30)  *  .5 mL in 1 SYRINGE (62935-305-29)  *  .5 mL in 1 SYRINGE (62935-304-30) </PackageDescription>
    <NDC11Code>62935-0303-30</NDC11Code>
    <ProductNDC>62935-303</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20030226</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021488</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20030226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD® is indicated for the palliative treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD® is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four- or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD® is prefilled and supplied in two separate, sterile syringes whose contents are mixed immediately prior to administration.  The two syringes are joined and the single dose product is mixed until it is homogenous.  ELIGARD® is administered subcutaneously, where it forms a solid drug delivery depot. One syringe contains the ATRIGEL® Delivery System and the other contains leuprolide acetate.  ATRIGEL® is a polymeric (non-gelatin containing) delivery system consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP). Refer to Table 6 for the delivery system composition and reconstituted product formulation for each ELIGARD® product. Table 6.  ELIGARD® Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-306-40</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (62935-306-40)  / .5 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>62935-0306-40</NDC11Code>
    <ProductNDC>62935-306</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20240111</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021488</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/.5mL</StrengthUnit>
    <Pharm_Classes>Gonadotropin Releasing Hormone Receptor Agonist [EPC], Gonadotropin Releasing Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240111</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD is indicated for the treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four, or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD is supplied as a pre-connected syringe system comprised of two prefilled syringes (syringe A and syringe B) connected using a coupling device.  Immediately prior to administration, the contents of the pre-connected syringe system are mixed until homogenous.  ELIGARD is administered subcutaneously, where it forms a solid drug delivery depot. Syringe A contains the in situ polymeric extended release technology consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP) and syringe B contains leuprolide acetate. Refer to Table 5 for the delivery system composition and reconstituted product formulation for each ELIGARD product. Table 5.  ELIGARD Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-452-45</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-452-45)  *  .375 mL in 1 SYRINGE (62935-451-44)  *  .375 mL in 1 SYRINGE (62935-450-45) </PackageDescription>
    <NDC11Code>62935-0452-45</NDC11Code>
    <ProductNDC>62935-452</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20050107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021731</ApplicationNumber>
    <LabelerName>TOLMAR PHARMACEUTICALS INC.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2019-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62935-453-45</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-453-45)  *  .375 mL in 1 SYRINGE (62935-454-44)  *  .375 mL in 1 SYRINGE (62935-455-45) </PackageDescription>
    <NDC11Code>62935-0453-45</NDC11Code>
    <ProductNDC>62935-453</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20050107</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021731</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20050107</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD® is indicated for the palliative treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD® is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four- or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD® is prefilled and supplied in two separate, sterile syringes whose contents are mixed immediately prior to administration.  The two syringes are joined and the single dose product is mixed until it is homogenous.  ELIGARD® is administered subcutaneously, where it forms a solid drug delivery depot. One syringe contains the ATRIGEL® Delivery System and the other contains leuprolide acetate.  ATRIGEL® is a polymeric (non-gelatin containing) delivery system consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP). Refer to Table 6 for the delivery system composition and reconstituted product formulation for each ELIGARD® product. Table 6.  ELIGARD® Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-461-50</NDCCode>
    <PackageDescription>1 SYRINGE in 1 CARTON (62935-461-50)  / .375 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>62935-0461-50</NDC11Code>
    <ProductNDC>62935-461</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SUSPENSION, EXTENDED RELEASE</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20230306</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021731</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
    <StrengthNumber>45</StrengthNumber>
    <StrengthUnit>mg/.375mL</StrengthUnit>
    <Pharm_Classes>Gonadotropin Releasing Hormone Receptor Agonist [EPC], Gonadotropin Releasing Hormone Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-05-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20230306</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD is indicated for the treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four, or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD is supplied as a pre-connected syringe system comprised of two prefilled syringes (syringe A and syringe B) connected using a coupling device.  Immediately prior to administration, the contents of the pre-connected syringe system are mixed until homogenous.  ELIGARD is administered subcutaneously, where it forms a solid drug delivery depot. Syringe A contains the in situ polymeric extended release technology consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP) and syringe B contains leuprolide acetate. Refer to Table 5 for the delivery system composition and reconstituted product formulation for each ELIGARD product. Table 5.  ELIGARD Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>62935-752-75</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-752-75)  *  .25 mL in 1 SYRINGE (62935-751-74)  *  .25 mL in 1 SYRINGE (62935-750-75) </PackageDescription>
    <NDC11Code>62935-0752-75</NDC11Code>
    <ProductNDC>62935-752</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20020515</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021343</ApplicationNumber>
    <LabelerName>TOLMAR PHARMACEUTICALS INC.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2019-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62935-753-75</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (62935-753-75)  *  .25 mL in 1 SYRINGE (62935-754-74)  *  .25 mL in 1 SYRINGE (62935-755-75) </PackageDescription>
    <NDC11Code>62935-0753-75</NDC11Code>
    <ProductNDC>62935-753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Eligard</ProprietaryName>
    <NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20020515</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021343</ApplicationNumber>
    <LabelerName>TOLMAR Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2024-08-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ELIGARD® is indicated for the palliative treatment of advanced prostate cancer.</IndicationAndUsage>
    <Description>ELIGARD® is a sterile polymeric matrix formulation of leuprolide acetate, a GnRH agonist, for subcutaneous injection.  It is designed to deliver leuprolide acetate at a controlled rate over a one-, three-, four- or six-month therapeutic period. Leuprolide acetate is a synthetic nonapeptide analog of naturally occurring gonadotropin releasing hormone (GnRH) that, when given continuously, inhibits pituitary gonadotropin secretion and suppresses testicular and ovarian steroidogenesis.  The analog possesses greater potency than the natural hormone.  The chemical name is 5-oxo-L-prolyl-L-histidyl-L-tryptophyl-L-seryl-L-tyrosyl-D-leucyl-L-leucyl-L-arginyl-N-ethyl-L-prolinamide acetate (salt) with the following structural formula. ELIGARD® is prefilled and supplied in two separate, sterile syringes whose contents are mixed immediately prior to administration.  The two syringes are joined and the single dose product is mixed until it is homogenous.  ELIGARD® is administered subcutaneously, where it forms a solid drug delivery depot. One syringe contains the ATRIGEL® Delivery System and the other contains leuprolide acetate.  ATRIGEL® is a polymeric (non-gelatin containing) delivery system consisting of a biodegradable poly (DL-lactide-co-glycolide) (PLGH or PLG) polymer formulation dissolved in a biocompatible solvent, N-methyl-2-pyrrolidone (NMP). Refer to Table 6 for the delivery system composition and reconstituted product formulation for each ELIGARD® product. Table 6.  ELIGARD® Delivery System Composition and Reconstituted Product Formulation.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-756-01</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (10135-756-01) </PackageDescription>
    <NDC11Code>10135-0756-01</NDC11Code>
    <ProductNDC>10135-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071173</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
    <Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&amp;C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&amp;C Red No. 40 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-756-10</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (10135-756-10) </PackageDescription>
    <NDC11Code>10135-0756-10</NDC11Code>
    <ProductNDC>10135-756</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Haloperidol</ProprietaryName>
    <NonProprietaryName>Haloperidol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA071173</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>HALOPERIDOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Typical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Haloperidol tablets, USP are indicated for use in the management of manifestations of psychotic disorders. Haloperidol tablets, USP are indicated for the control of tics and vocal utterances of Tourette’s Disorder in children and adults. Haloperidol tablets, USP are effective for the treatment of severe behavior problems in children of combative, explosive hyperexcitability (which cannot be accounted for by immediate provocation). Haloperidol tablets, USP are also effective in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability, and poor frustration tolerance. Haloperidol tablets, USP should be reserved for these two groups of children only after failure to respond to psychotherapy or medications other than antipsychotics.</IndicationAndUsage>
    <Description>Haloperidol is the first of the butyrophenone series of major tranquilizers. The chemical designation is 4-[4-(p-chloro-phenyl)-4-hydroxypiperidino]-4’—fluorobutyrophenone and it has the following structural formula. Haloperidol is supplied as tablets for oral administration containing 0.5 mg, 1 mg, 2 mg, 5 mg, 10 mg or 20 mg of haloperidol, USP and contains the following inactive ingredients: magnesium stearate, microcrystalline cellulose, pregelatinized starch. In addition, the 1 mg, 5 mg and 10 mg tablets contain D&amp;C Yellow No. 10 Aluminum Lake. The 5 mg and 10 mg tablets contain FD&amp;C Blue No. 1 Aluminum Lake, 20 mg tablets contain FD&amp;C Red No. 40 Aluminum Lake.</Description>
  </NDC>
  <NDC>
    <NDCCode>10237-756-02</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 PACKAGE (10237-756-02)  &gt; .02 g in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>10237-0756-02</NDC11Code>
    <ProductNDC>10237-756</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Orajel For Cold Sores</ProprietaryName>
    <ProprietaryNameSuffix>Single Dose</ProprietaryNameSuffix>
    <NonProprietaryName>Benzalkonium Chloride, Benzocaine</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20120701</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part356</ApplicationNumber>
    <LabelerName>Church &amp; Dwight Co., Inc.</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE; BENZOCAINE</SubstanceName>
    <StrengthNumber>.13; .5</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>10237-756-03</NDCCode>
    <PackageDescription>2 VIAL, SINGLE-DOSE in 1 PACKAGE (10237-756-03)  &gt; .02 g in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>10237-0756-03</NDC11Code>
    <ProductNDC>10237-756</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Orajel For Cold Sores</ProprietaryName>
    <ProprietaryNameSuffix>Single Dose</ProprietaryNameSuffix>
    <NonProprietaryName>Benzalkonium Chloride, Benzocaine</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20120701</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part356</ApplicationNumber>
    <LabelerName>Church &amp; Dwight Co., Inc.</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE; BENZOCAINE</SubstanceName>
    <StrengthNumber>.13; .5</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-12-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20120701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>10237-756-04</NDCCode>
    <PackageDescription>4 VIAL, SINGLE-DOSE in 1 PACKAGE (10237-756-04)  &gt; 2.4 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>10237-0756-04</NDC11Code>
    <ProductNDC>10237-756</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Orajel For Cold Sores</ProprietaryName>
    <ProprietaryNameSuffix>Single Dose</ProprietaryNameSuffix>
    <NonProprietaryName>Benzalkonium Chloride, Benzocaine</NonProprietaryName>
    <DosageFormName>LIQUID</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20120701</StartMarketingDate>
    <EndMarketingDate>20240930</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part356</ApplicationNumber>
    <LabelerName>Church &amp; Dwight Co., Inc.</LabelerName>
    <SubstanceName>BENZALKONIUM CHLORIDE; BENZOCAINE</SubstanceName>
    <StrengthNumber>1.3; 50</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Increased Histamine Release [PE], Standardized Chemical Allergen [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20120701</StartMarketingDatePackage>
    <EndMarketingDatePackage>20240930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>USES: 1 to treat cold sores / fever blisters.</IndicationAndUsage>
  </NDC>
</NDCList>