{
"NDC": [
{
"NDCCode": "63304-076-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-05) ",
"NDC11Code": "63304-0076-05",
"ProductNDC": "63304-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride Extended-release",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076368",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191120",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.",
"Description": "The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose."
},
{
"NDCCode": "63304-076-01",
"PackageDescription": "100 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-01) ",
"NDC11Code": "63304-0076-01",
"ProductNDC": "63304-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride Extended-release",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076368",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191120",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.",
"Description": "The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose."
},
{
"NDCCode": "63304-076-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-10) ",
"NDC11Code": "63304-0076-10",
"ProductNDC": "63304-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride Extended-release",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076368",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191120",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.",
"Description": "The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose."
},
{
"NDCCode": "11084-076-05",
"PackageDescription": "3780 mL in 1 BOTTLE, PLASTIC (11084-076-05)",
"NDC11Code": "11084-0076-05",
"ProductNDC": "11084-076",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Deb Gold",
"NonProprietaryName": "Triclosan",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Deb USA, Inc.",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".15",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Uses. For handwashing to reduce bacteria on the skin."
},
{
"NDCCode": "21922-076-05",
"PackageDescription": "1 TUBE in 1 CARTON (21922-076-05) / 30 g in 1 TUBE",
"NDC11Code": "21922-0076-05",
"ProductNDC": "21922-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine And Prilocaine",
"ProprietaryNameSuffix": "Lidocaine And Prilocaine",
"NonProprietaryName": "Lidocaine And Prilocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20241212",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076320",
"LabelerName": "Encube Ethicals, Inc.",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241212",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine and prilocaine cream USP, 2.5%/2.5% (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. normal intact skin for local analgesia. genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).",
"Description": "Lidocaine and prilocaine cream USP, 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1 : 1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2- methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg. prilocaine 25 mg, purified water, PEG-60/hydrogenated castor oil, carbopol 5984 and sodium hydroxide to adjust pH to approximately 9. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00."
},
{
"NDCCode": "58159-076-05",
"PackageDescription": "5 kg in 1 DRUM (58159-076-05) ",
"NDC11Code": "58159-0076-05",
"ProductNDC": "58159-076",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Betaine Anhydrous",
"DosageFormName": "POWDER",
"StartMarketingDate": "20241210",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "NURAY CHEMICALS PRIVATE LIMITED",
"SubstanceName": "BETAINE",
"StrengthNumber": "35",
"StrengthUnit": "kg/35kg",
"Status": "Unfinished",
"LastUpdate": "2024-12-28",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "10-DEC-24"
},
{
"NDCCode": "71209-076-05",
"PackageDescription": "100 TABLET in 1 BOTTLE (71209-076-05) ",
"NDC11Code": "71209-0076-05",
"ProductNDC": "71209-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Olanzapine",
"NonProprietaryName": "Olanzapine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210022",
"LabelerName": "Cadila Pharmaceuticals Limited",
"SubstanceName": "OLANZAPINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Active",
"LastUpdate": "2025-03-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20231004",
"SamplePackage": "N",
"IndicationAndUsage": "Olanzapine is an atypical antipsychotic indicated:As oral formulation for the: Treatment of schizophrenia. (1.1) Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1) Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1) Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2) Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2) Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2) Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3) Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2) Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine IntraMuscular for the: Treatment of acute agitation associated with schizophrenia and bipolar I mania. (1.4) Efficacy was established in three 1-day trials in adults. (14.3)As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. (1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. (1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.",
"Description": "Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b][1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each film-coated tablet contains olanzapine, USP equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH101) and microcrystalline cellulose (Avicel PH102). The color coating contains hypromellose, titanium dioxide and triacetin."
},
{
"NDCCode": "72189-076-05",
"PackageDescription": "3 mL in 1 BOTTLE (72189-076-05) ",
"NDC11Code": "72189-0076-05",
"ProductNDC": "72189-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Moxifloxacin",
"NonProprietaryName": "Moxifloxacin",
"DosageFormName": "SOLUTION/ DROPS",
"RouteName": "OPHTHALMIC",
"StartMarketingDate": "20200304",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206242",
"LabelerName": "DIRECT RX",
"SubstanceName": "MOXIFLOXACIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Quinolone Antimicrobial [EPC], Quinolones [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20200304",
"SamplePackage": "N",
"IndicationAndUsage": "Moxifloxacin Ophthalmic Solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms: Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis *Efficacy for this organism was studied in fewer than 10 infections.",
"Description": "Moxifloxacin Ophthalmic Solution USP, 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride USP is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. [Chemical Structure] C21H24FN3O4HCl Mol Wt 437.9 Chemical Name: 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro- 6H-pyrrolol[3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. Moxifloxacin hydrochloride USP is a slightly yellow to yellow powder or crystals, slightly hygroscopic. Each mL of Moxifloxacin Ophthalmic Solution USP contains 5.45 mg moxifloxacin hydrochloride USP, equivalent to 5 mg moxifloxacin base. Contains: Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, and water for injection. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin Ophthalmic Solution, USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg."
},
{
"NDCCode": "72888-076-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (72888-076-05) ",
"NDC11Code": "72888-0076-05",
"ProductNDC": "72888-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20220725",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA215725",
"LabelerName": "Advagen Pharma Ltd",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "1500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220725",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release tablets are indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release tablets are a solid oral dosage form of potassium chloride containing 750 mg, 1125 mg and 1500 mg of potassium chloride, USP, equivalent to 10 mEq, 15 mEq and 20 mEq of potassium, respectively, in a film-coated matrix tablet. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The 10 mEq, 15 mEq and 20 mEq tablets contain colloidal silicon dioxide, magnesium stearate, paraffin, polyethylene glycol, polyvinyl acetate, povidone, sodium lauryl sulphate, polyvinyl alcohol, talc, titanium dioxide, triethyl citrate, D&C yellow # 10 (for 15 mEq) and FD&C yellow # 6 (for 15 mEq). FDA approved dissolution test specifications and assay sample preparation method differs from USP."
},
{
"NDCCode": "73152-076-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (73152-076-05) ",
"NDC11Code": "73152-0076-05",
"ProductNDC": "73152-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amantadine Hydrochloride",
"NonProprietaryName": "Amantadine Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20210219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210129",
"LabelerName": "ATHEM LLC",
"SubstanceName": "AMANTADINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Influenza A M2 Protein Inhibitor [EPC], M2 Protein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210219",
"SamplePackage": "N",
"IndicationAndUsage": "Amantadine Hydrochloride is indicated for the prophylaxis and treatment of signs and symptoms of infection caused by various strains of influenza A virus. Amantadine Hydrochloride is also indicated in the treatment of parkinsonism and drug-induced extrapyramidal reactions. Influenza A Prophylaxis. Amantadine Hydrochloride is indicated for chemoprophylaxis against signs and symptoms of influenza A virus infection. Because Amantadine Hydrochloride Tablets do not completely prevent the host immune response to influenza A infection, individuals who take this drug may still develop immune responses to natural disease or vaccination and may be protected when later exposed to antigenically related viruses. Following vaccination during an influenza A outbreak, Amantadine Hydrochloride Tablets prophylaxis should be considered for the 2- to 4- week time period required to develop an antibody response. Influenza A Treatment. Amantadine Hydrochloride is also indicated in the treatment of uncomplicated respiratory tract illness caused by influenza A virus strains especially when administered early in the course of illness. There are no well-controlled clinical studies demonstrating that treatment with Amantadine Hydrochloride will avoid the development of influenza A virus pneumonitis or other complications in high risk patients. There is no clinical evidence indicating that Amantadine Hydrochloride Tablets and Capsules are effective in the prophylaxis or treatment of viral respiratory tract illnesses other than those caused by influenza A virus strains. The following points should be considered before initiating treatment or prophylaxis with Amantadine Hydrochloride. Amantadine Hydrochloride is not a substitute for early vaccination on an annual basis as recommended by the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices. Influenza viruses change over time. Emergence of resistance mutations could decrease drug effectiveness. Other factors (for example, changes in viral virulence) might also diminish clinical benefit of antiviral drugs. Prescribers should consider available information on influenza drug susceptibility patterns and treatment effects when deciding whether to use Amantadine Hydrochloride. Parkinson's Disease / Syndrome. Amantadine Hydrochloride is indicated in the treatment of idiopathic Parkinson's disease (Paralysis Agitans), postencephalitic parkinsonism, and symptomatic parkinsonism which may follow injury to the nervous system by carbon monoxide intoxication. It is indicated in those elderly patients believed to develop parkinsonism in association with cerebral arteriosclerosis. In the treatment of Parkinson's disease, Amantadine Hydrochloride is less effective than levodopa, (-)-3-(3,4-dihydroxyphenyl)-L-alanine, and its efficacy in comparison with the anticholinergic antiparkinson drugs has not yet been established. Drug-Induced Extrapyramidal Reactions. Amantadine Hydrochloride is indicated in the treatment of drug-induced extrapyramidal reactions. Although anticholinergic-type side effects have been noted with Amantadine Hydrochloride Tablets when used in patients with drug-induced extrapyramidal reactions, there is a lower incidence of these side effects than that observed with the anticholinergic antiparkinson drugs.",
"Description": "Amantadine hydrochloride is designated generically as amantadine hydrochloride and chemically as 1-adamantanamine hydrochloride. C10H17NHCl. Amantadine hydrochloride is a stable white or nearly white crystalline powder, freely soluble in water and soluble in alcohol and in chloroform. Amantadine hydrochloride has pharmacological actions as both an anti-Parkinson and an antiviral drug. Each tablet intended for oral administration contains 100 mg amantadine hydrochloride and has the following inactive ingredients: microcrystalline cellulose, povidone, sodium starch glycolate, magnesium stearate, colloidal silicon dioxide. Each capsule intended for oral administration contains 100mg amantadine hydrochloride. Inactive ingredients: magnesium stearate, microcrystalline cellulose, Povidone , Sodium Starch Glycolate, Colloidal Silicon Dioxide. The capsule shells and imprinting ink contain FD&C Blue #1, FD&C Red #40, gelatin, FD&C Yellow #6, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "73212-076-05",
"PackageDescription": "5 g in 1 BOTTLE (73212-076-05) ",
"NDC11Code": "73212-0076-05",
"ProductNDC": "73212-076",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Bimatoprost",
"DosageFormName": "POWDER",
"StartMarketingDate": "20230602",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Qingdao Biopeptek Co., Ltd.",
"SubstanceName": "BIMATOPROST",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-01-12",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "02-JUN-23"
},
{
"NDCCode": "73569-076-05",
"PackageDescription": "20 g in 1 BOTTLE (73569-076-05) ",
"NDC11Code": "73569-0076-05",
"ProductNDC": "73569-076",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Leuprolide Acetate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250314",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Zhejiang Peptites Biotech Co., Ltd.",
"SubstanceName": "LEUPROLIDE ACETATE",
"StrengthNumber": "1",
"StrengthUnit": "g/g",
"Status": "Unfinished",
"LastUpdate": "2026-03-09",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "14-MAR-25"
},
{
"NDCCode": "83254-076-05",
"PackageDescription": "500 mL in 1 BOTTLE (83254-076-05) ",
"NDC11Code": "83254-0076-05",
"ProductNDC": "83254-076",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Calamine",
"NonProprietaryName": "Nanz Relieve Calamine Lotion",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230505",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "M016",
"LabelerName": "1201258 Ontario Inc. O/A Nanz Pharma",
"SubstanceName": "FERRIC OXIDE RED; ZINC OXIDE",
"StrengthNumber": "7.6; 7.6",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20230505",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of skin irritations and itching caused by insect bites, sunburn, poison ivy, sumac, and poison oak."
},
{
"NDCCode": "63304-017-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-017-05) ",
"NDC11Code": "63304-0017-05",
"ProductNDC": "63304-017",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranolazine",
"NonProprietaryName": "Ranolazine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211707",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "RANOLAZINE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190528",
"SamplePackage": "N",
"IndicationAndUsage": "Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.",
"Description": "Ranolazine tablets are available as film-coated, non-scored, extended-release tablets for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N‑(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has a molecular formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is an off-white to white powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium hydroxide, sodium lauryl sulfate, titanium dioxide and triacetin. Additional inactive ingredients for the 500 mg tablet include ferric oxide yellow, ferric oxide red; additional inactive ingredients for the 1000 mg tablet include ferric oxide yellow."
},
{
"NDCCode": "63304-018-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-018-05) ",
"NDC11Code": "63304-0018-05",
"ProductNDC": "63304-018",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ranolazine",
"NonProprietaryName": "Ranolazine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20190528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211707",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "RANOLAZINE",
"StrengthNumber": "1000",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2020-08-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190528",
"SamplePackage": "N",
"IndicationAndUsage": "Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.",
"Description": "Ranolazine tablets are available as film-coated, non-scored, extended-release tablets for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N‑(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has a molecular formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is an off-white to white powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium hydroxide, sodium lauryl sulfate, titanium dioxide and triacetin. Additional inactive ingredients for the 500 mg tablet include ferric oxide yellow, ferric oxide red; additional inactive ingredients for the 1000 mg tablet include ferric oxide yellow."
},
{
"NDCCode": "63304-090-05",
"PackageDescription": "500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-090-05) ",
"NDC11Code": "63304-0090-05",
"ProductNDC": "63304-090",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208864",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200102",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3."
},
{
"NDCCode": "63304-165-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (63304-165-05)",
"NDC11Code": "63304-0165-05",
"ProductNDC": "63304-165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077977",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).",
"Description": "Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide."
},
{
"NDCCode": "63304-166-05",
"PackageDescription": "500 TABLET, COATED in 1 BOTTLE (63304-166-05)",
"NDC11Code": "63304-0166-05",
"ProductNDC": "63304-166",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20070206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077977",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).",
"Description": "Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide."
},
{
"NDCCode": "63304-193-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (63304-193-05)",
"NDC11Code": "63304-0193-05",
"ProductNDC": "63304-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milnacipran Hydrochloride",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205088",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63304-194-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (63304-194-05)",
"NDC11Code": "63304-0194-05",
"ProductNDC": "63304-194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milnacipran Hydrochloride",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205088",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63304-212-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (63304-212-05)",
"NDC11Code": "63304-0212-05",
"ProductNDC": "63304-212",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milnacipran Hydrochloride",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205088",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63304-213-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (63304-213-05)",
"NDC11Code": "63304-0213-05",
"ProductNDC": "63304-213",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Milnacipran Hydrochloride",
"NonProprietaryName": "Milnacipran Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20141127",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205088",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "MILNACIPRAN HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63304-218-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-218-05)",
"NDC11Code": "63304-0218-05",
"ProductNDC": "63304-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-219-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-219-05)",
"NDC11Code": "63304-0219-05",
"ProductNDC": "63304-219",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-220-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-220-05)",
"NDC11Code": "63304-0220-05",
"ProductNDC": "63304-220",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-221-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-221-05)",
"NDC11Code": "63304-0221-05",
"ProductNDC": "63304-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-222-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-222-05)",
"NDC11Code": "63304-0222-05",
"ProductNDC": "63304-222",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-223-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-223-05)",
"NDC11Code": "63304-0223-05",
"ProductNDC": "63304-223",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-224-05",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-224-05)",
"NDC11Code": "63304-0224-05",
"ProductNDC": "63304-224",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20150413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203506",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA],Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows."
},
{
"NDCCode": "63304-254-05",
"PackageDescription": "500 TABLET in 1 BOTTLE (63304-254-05)",
"NDC11Code": "63304-0254-05",
"ProductNDC": "63304-254",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pioglitazone",
"NonProprietaryName": "Pioglitazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130207",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202467",
"LabelerName": "Ranbaxy Pharmaceuticals Inc",
"SubstanceName": "PIOGLITAZONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [Chemical/Ingredient],PPAR gamma [Chemical/Ingredient],Thiazolidinedione [EPC],Thiazolidinediones [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2016-01-22"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63304-076-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-05) </PackageDescription>
<NDC11Code>63304-0076-05</NDC11Code>
<ProductNDC>63304-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride Extended-release</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076368</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
<Description>The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>63304-076-01</NDCCode>
<PackageDescription>100 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-01) </PackageDescription>
<NDC11Code>63304-0076-01</NDC11Code>
<ProductNDC>63304-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride Extended-release</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076368</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
<Description>The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>63304-076-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-10) </PackageDescription>
<NDC11Code>63304-0076-10</NDC11Code>
<ProductNDC>63304-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride Extended-release</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076368</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
<Description>The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>11084-076-05</NDCCode>
<PackageDescription>3780 mL in 1 BOTTLE, PLASTIC (11084-076-05)</PackageDescription>
<NDC11Code>11084-0076-05</NDC11Code>
<ProductNDC>11084-076</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Deb Gold</ProprietaryName>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Deb USA, Inc.</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Uses. For handwashing to reduce bacteria on the skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21922-076-05</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (21922-076-05) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>21922-0076-05</NDC11Code>
<ProductNDC>21922-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine And Prilocaine</ProprietaryName>
<ProprietaryNameSuffix>Lidocaine And Prilocaine</ProprietaryNameSuffix>
<NonProprietaryName>Lidocaine And Prilocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20241212</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076320</ApplicationNumber>
<LabelerName>Encube Ethicals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amide Local Anesthetic [EPC], Amides [CS], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine and prilocaine cream USP, 2.5%/2.5% (a eutectic mixture of lidocaine 2.5% and prilocaine 2.5%) is indicated as a topical anesthetic for use on. normal intact skin for local analgesia. genital mucous membranes for superficial minor surgery and as pretreatment for infiltration anesthesia.Lidocaine and prilocaine cream is not recommended in any clinical situation when penetration or migration beyond the tympanic membrane into the middle ear is possible because of the ototoxic effects observed in animal studies (see WARNINGS).</IndicationAndUsage>
<Description>Lidocaine and prilocaine cream USP, 2.5%/2.5% is an emulsion in which the oil phase is a eutectic mixture of lidocaine and prilocaine in a ratio of 1 : 1 by weight. This eutectic mixture has a melting point below room temperature and therefore both local anesthetics exist as a liquid oil rather than as crystals. It is packaged in 5 gram and 30 gram tubes. Lidocaine is chemically designated as acetamide, 2- (diethylamino)-N-(2,6-dimethylphenyl), has an octanol: water partition ratio of 43 at pH 7.4, and has the following structure. Prilocaine is chemically designated as propanamide, N-(2- methylphenyl)-2-(propylamino), has an octanol: water partition ratio of 25 at pH 7.4, and has the following structure. Each gram of lidocaine and prilocaine cream contains lidocaine 25 mg. prilocaine 25 mg, purified water, PEG-60/hydrogenated castor oil, carbopol 5984 and sodium hydroxide to adjust pH to approximately 9. Lidocaine and prilocaine cream contains no preservative, however it passes the USP antimicrobial effectiveness test due to the pH. The specific gravity of lidocaine and prilocaine cream is 1.00.</Description>
</NDC>
<NDC>
<NDCCode>58159-076-05</NDCCode>
<PackageDescription>5 kg in 1 DRUM (58159-076-05) </PackageDescription>
<NDC11Code>58159-0076-05</NDC11Code>
<ProductNDC>58159-076</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Betaine Anhydrous</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20241210</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>NURAY CHEMICALS PRIVATE LIMITED</LabelerName>
<SubstanceName>BETAINE</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>kg/35kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-12-28</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-DEC-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>71209-076-05</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (71209-076-05) </PackageDescription>
<NDC11Code>71209-0076-05</NDC11Code>
<ProductNDC>71209-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Olanzapine</ProprietaryName>
<NonProprietaryName>Olanzapine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210022</ApplicationNumber>
<LabelerName>Cadila Pharmaceuticals Limited</LabelerName>
<SubstanceName>OLANZAPINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-03-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231004</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Olanzapine is an atypical antipsychotic indicated:As oral formulation for the: Treatment of schizophrenia. (1.1) Adults: Efficacy was established in three clinical trials in patients with schizophrenia: two 6-week trials and one maintenance trial. (14.1) Adolescents (ages 13 to 17): Efficacy was established in one 6-week trial in patients with schizophrenia (14.1). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.1) Acute treatment of manic or mixed episodes associated with bipolar I disorder and maintenance treatment of bipolar I disorder. (1.2) Adults: Efficacy was established in three clinical trials in patients with manic or mixed episodes of bipolar I disorder: two 3- to 4-week trials and one maintenance trial. (14.2) Adolescents (ages 13 to 17): Efficacy was established in one 3-week trial in patients with manic or mixed episodes associated with bipolar I disorder (14.2). The increased potential (in adolescents compared with adults) for weight gain and dyslipidemia may lead clinicians to consider prescribing other drugs first in adolescents. (1.2) Medication therapy for pediatric patients with schizophrenia or bipolar I disorder should be undertaken only after a thorough diagnostic evaluation and with careful consideration of the potential risks. (1.3) Adjunct to valproate or lithium in the treatment of manic or mixed episodes associated with bipolar I disorder. (1.2) Efficacy was established in two 6-week clinical trials in adults (14.2). Maintenance efficacy has not been systematically evaluated.As Olanzapine IntraMuscular for the: Treatment of acute agitation associated with schizophrenia and bipolar I mania. (1.4) Efficacy was established in three 1-day trials in adults. (14.3)As Olanzapine and Fluoxetine in Combination for the: Treatment of depressive episodes associated with bipolar I disorder. (1.5) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination); refer to the product label for Symbyax. Treatment of treatment resistant depression. (1.6) Efficacy was established with Symbyax (olanzapine and fluoxetine in combination) in adults; refer to the product label for Symbyax.</IndicationAndUsage>
<Description>Olanzapine, USP is an atypical antipsychotic that belongs to the thienobenzodiazepine class. The chemical designation is 2-methyl-4-(4-methyl-1-piperazinyl)-10H-thieno[2,3-b][1,5]benzodiazepine. The molecular formula is C17H20N4S, which corresponds to a molecular weight of 312.44. The chemical structure is. Olanzapine, USP is a yellow crystalline solid, which is practically insoluble in water. Olanzapine tablets, USP are intended for oral administration only. Each film-coated tablet contains olanzapine, USP equivalent to 2.5 mg (8 mcmol), 5 mg (16 mcmol), 7.5 mg (24 mcmol), 10 mg (32 mcmol), 15 mg (48 mcmol), or 20 mg (64 mcmol). Inactive ingredients are crospovidone, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose (Avicel PH101) and microcrystalline cellulose (Avicel PH102). The color coating contains hypromellose, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>72189-076-05</NDCCode>
<PackageDescription>3 mL in 1 BOTTLE (72189-076-05) </PackageDescription>
<NDC11Code>72189-0076-05</NDC11Code>
<ProductNDC>72189-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Moxifloxacin</ProprietaryName>
<NonProprietaryName>Moxifloxacin</NonProprietaryName>
<DosageFormName>SOLUTION/ DROPS</DosageFormName>
<RouteName>OPHTHALMIC</RouteName>
<StartMarketingDate>20200304</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206242</ApplicationNumber>
<LabelerName>DIRECT RX</LabelerName>
<SubstanceName>MOXIFLOXACIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Quinolone Antimicrobial [EPC], Quinolones [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200304</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Moxifloxacin Ophthalmic Solution is indicated for the treatment of bacterial conjunctivitis caused by susceptible strains of the following organisms: Corynebacterium species* Micrococcus luteus* Staphylococcus aureus Staphylococcus epidermidis Staphylococcus haemolyticus Staphylococcus hominis Staphylococcus warneri* Streptococcus pneumoniae Streptococcus viridans group Acinetobacter lwoffii* Haemophilus influenzae Haemophilus parainfluenzae* Chlamydia trachomatis *Efficacy for this organism was studied in fewer than 10 infections.</IndicationAndUsage>
<Description>Moxifloxacin Ophthalmic Solution USP, 0.5% is a sterile solution for topical ophthalmic use. Moxifloxacin hydrochloride USP is an 8-methoxy fluoroquinolone anti-infective, with a diazabicyclononyl ring at the C7 position. [Chemical Structure] C21H24FN3O4HCl Mol Wt 437.9 Chemical Name: 1-Cyclopropyl-6-fluoro-1,4-dihydro-8-methoxy-7-[(4aS,7aS)-octahydro- 6H-pyrrolol[3,4b]pyridin-6-yl]-4-oxo-3-quinolinecarboxylic acid, monohydrochloride. Moxifloxacin hydrochloride USP is a slightly yellow to yellow powder or crystals, slightly hygroscopic. Each mL of Moxifloxacin Ophthalmic Solution USP contains 5.45 mg moxifloxacin hydrochloride USP, equivalent to 5 mg moxifloxacin base. Contains: Active: Moxifloxacin 0.5% (5 mg/mL); Inactives: Boric acid, sodium chloride, and water for injection. May also contain hydrochloric acid/sodium hydroxide to adjust pH to approximately 6.8. Moxifloxacin Ophthalmic Solution, USP is an isotonic solution with an osmolality of approximately 290 mOsm/kg.</Description>
</NDC>
<NDC>
<NDCCode>72888-076-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (72888-076-05) </PackageDescription>
<NDC11Code>72888-0076-05</NDC11Code>
<ProductNDC>72888-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220725</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA215725</ApplicationNumber>
<LabelerName>Advagen Pharma Ltd</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>1500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220725</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release tablets are indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release tablets are a solid oral dosage form of potassium chloride containing 750 mg, 1125 mg and 1500 mg of potassium chloride, USP, equivalent to 10 mEq, 15 mEq and 20 mEq of potassium, respectively, in a film-coated matrix tablet. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP, occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. The 10 mEq, 15 mEq and 20 mEq tablets contain colloidal silicon dioxide, magnesium stearate, paraffin, polyethylene glycol, polyvinyl acetate, povidone, sodium lauryl sulphate, polyvinyl alcohol, talc, titanium dioxide, triethyl citrate, D&C yellow # 10 (for 15 mEq) and FD&C yellow # 6 (for 15 mEq). FDA approved dissolution test specifications and assay sample preparation method differs from USP.</Description>
</NDC>
<NDC>
<NDCCode>73152-076-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (73152-076-05) </PackageDescription>
<NDC11Code>73152-0076-05</NDC11Code>
<ProductNDC>73152-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amantadine Hydrochloride</ProprietaryName>
<NonProprietaryName>Amantadine Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210129</ApplicationNumber>
<LabelerName>ATHEM LLC</LabelerName>
<SubstanceName>AMANTADINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Influenza A M2 Protein Inhibitor [EPC], M2 Protein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amantadine Hydrochloride is indicated for the prophylaxis and treatment of signs and symptoms of infection caused by various strains of influenza A virus. Amantadine Hydrochloride is also indicated in the treatment of parkinsonism and drug-induced extrapyramidal reactions. Influenza A Prophylaxis. Amantadine Hydrochloride is indicated for chemoprophylaxis against signs and symptoms of influenza A virus infection. Because Amantadine Hydrochloride Tablets do not completely prevent the host immune response to influenza A infection, individuals who take this drug may still develop immune responses to natural disease or vaccination and may be protected when later exposed to antigenically related viruses. Following vaccination during an influenza A outbreak, Amantadine Hydrochloride Tablets prophylaxis should be considered for the 2- to 4- week time period required to develop an antibody response. Influenza A Treatment. Amantadine Hydrochloride is also indicated in the treatment of uncomplicated respiratory tract illness caused by influenza A virus strains especially when administered early in the course of illness. There are no well-controlled clinical studies demonstrating that treatment with Amantadine Hydrochloride will avoid the development of influenza A virus pneumonitis or other complications in high risk patients. There is no clinical evidence indicating that Amantadine Hydrochloride Tablets and Capsules are effective in the prophylaxis or treatment of viral respiratory tract illnesses other than those caused by influenza A virus strains. The following points should be considered before initiating treatment or prophylaxis with Amantadine Hydrochloride. Amantadine Hydrochloride is not a substitute for early vaccination on an annual basis as recommended by the Centers for Disease Control and Prevention Advisory Committee on Immunization Practices. Influenza viruses change over time. Emergence of resistance mutations could decrease drug effectiveness. Other factors (for example, changes in viral virulence) might also diminish clinical benefit of antiviral drugs. Prescribers should consider available information on influenza drug susceptibility patterns and treatment effects when deciding whether to use Amantadine Hydrochloride. Parkinson's Disease / Syndrome. Amantadine Hydrochloride is indicated in the treatment of idiopathic Parkinson's disease (Paralysis Agitans), postencephalitic parkinsonism, and symptomatic parkinsonism which may follow injury to the nervous system by carbon monoxide intoxication. It is indicated in those elderly patients believed to develop parkinsonism in association with cerebral arteriosclerosis. In the treatment of Parkinson's disease, Amantadine Hydrochloride is less effective than levodopa, (-)-3-(3,4-dihydroxyphenyl)-L-alanine, and its efficacy in comparison with the anticholinergic antiparkinson drugs has not yet been established. Drug-Induced Extrapyramidal Reactions. Amantadine Hydrochloride is indicated in the treatment of drug-induced extrapyramidal reactions. Although anticholinergic-type side effects have been noted with Amantadine Hydrochloride Tablets when used in patients with drug-induced extrapyramidal reactions, there is a lower incidence of these side effects than that observed with the anticholinergic antiparkinson drugs.</IndicationAndUsage>
<Description>Amantadine hydrochloride is designated generically as amantadine hydrochloride and chemically as 1-adamantanamine hydrochloride. C10H17NHCl. Amantadine hydrochloride is a stable white or nearly white crystalline powder, freely soluble in water and soluble in alcohol and in chloroform. Amantadine hydrochloride has pharmacological actions as both an anti-Parkinson and an antiviral drug. Each tablet intended for oral administration contains 100 mg amantadine hydrochloride and has the following inactive ingredients: microcrystalline cellulose, povidone, sodium starch glycolate, magnesium stearate, colloidal silicon dioxide. Each capsule intended for oral administration contains 100mg amantadine hydrochloride. Inactive ingredients: magnesium stearate, microcrystalline cellulose, Povidone , Sodium Starch Glycolate, Colloidal Silicon Dioxide. The capsule shells and imprinting ink contain FD&C Blue #1, FD&C Red #40, gelatin, FD&C Yellow #6, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>73212-076-05</NDCCode>
<PackageDescription>5 g in 1 BOTTLE (73212-076-05) </PackageDescription>
<NDC11Code>73212-0076-05</NDC11Code>
<ProductNDC>73212-076</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Bimatoprost</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20230602</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Qingdao Biopeptek Co., Ltd.</LabelerName>
<SubstanceName>BIMATOPROST</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-01-12</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>02-JUN-23</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>73569-076-05</NDCCode>
<PackageDescription>20 g in 1 BOTTLE (73569-076-05) </PackageDescription>
<NDC11Code>73569-0076-05</NDC11Code>
<ProductNDC>73569-076</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Leuprolide Acetate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250314</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Zhejiang Peptites Biotech Co., Ltd.</LabelerName>
<SubstanceName>LEUPROLIDE ACETATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2026-03-09</LastUpdate>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>14-MAR-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>83254-076-05</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE (83254-076-05) </PackageDescription>
<NDC11Code>83254-0076-05</NDC11Code>
<ProductNDC>83254-076</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Calamine</ProprietaryName>
<NonProprietaryName>Nanz Relieve Calamine Lotion</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230505</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>1201258 Ontario Inc. O/A Nanz Pharma</LabelerName>
<SubstanceName>FERRIC OXIDE RED; ZINC OXIDE</SubstanceName>
<StrengthNumber>7.6; 7.6</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of skin irritations and itching caused by insect bites, sunburn, poison ivy, sumac, and poison oak.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63304-017-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-017-05) </PackageDescription>
<NDC11Code>63304-0017-05</NDC11Code>
<ProductNDC>63304-017</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranolazine</ProprietaryName>
<NonProprietaryName>Ranolazine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211707</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>RANOLAZINE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.</IndicationAndUsage>
<Description>Ranolazine tablets are available as film-coated, non-scored, extended-release tablets for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N‑(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has a molecular formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is an off-white to white powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium hydroxide, sodium lauryl sulfate, titanium dioxide and triacetin. Additional inactive ingredients for the 500 mg tablet include ferric oxide yellow, ferric oxide red; additional inactive ingredients for the 1000 mg tablet include ferric oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>63304-018-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-018-05) </PackageDescription>
<NDC11Code>63304-0018-05</NDC11Code>
<ProductNDC>63304-018</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ranolazine</ProprietaryName>
<NonProprietaryName>Ranolazine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211707</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>RANOLAZINE</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-anginal [EPC], Cytochrome P450 2D6 Inhibitors [MoA], Cytochrome P450 3A Inhibitors [MoA], Organic Cation Transporter 2 Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-08-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ranolazine extended-release tablets are indicated for the treatment of chronic angina. Ranolazine extended-release tablets may be used with beta-blockers, nitrates, calcium channel blockers, anti-platelet therapy, lipid-lowering therapy, ACE inhibitors, and angiotensin receptor blockers.</IndicationAndUsage>
<Description>Ranolazine tablets are available as film-coated, non-scored, extended-release tablets for oral administration. Ranolazine is a racemic mixture, chemically described as 1-piperazineacetamide, N‑(2,6-dimethylphenyl)-4-[2-hydroxy-3-(2-methoxyphenoxy)propyl]-, (±)-. It has a molecular formula of C24H33N3O4, a molecular weight of 427.54 g/mole, and the following structural formula. Ranolazine is an off-white to white powder. Ranolazine is soluble in dichloromethane and methanol. Ranolazine extended-release tablets contain 500 mg or 1000 mg of ranolazine and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium hydroxide, sodium lauryl sulfate, titanium dioxide and triacetin. Additional inactive ingredients for the 500 mg tablet include ferric oxide yellow, ferric oxide red; additional inactive ingredients for the 1000 mg tablet include ferric oxide yellow.</Description>
</NDC>
<NDC>
<NDCCode>63304-090-05</NDCCode>
<PackageDescription>500 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-090-05) </PackageDescription>
<NDC11Code>63304-0090-05</NDC11Code>
<ProductNDC>63304-090</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208864</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release capsules are indicated for the treatment and prophylaxis of hypokalemia in adults and children with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release capsules, USP, are an oral dosage form of microencapsulated potassium chloride containing 600 mg and 750 mg of potassium chloride, USP, equivalent to 8 mEq and 10 mEq of potassium, respectively. The chemical name of the active ingredient is potassium chloride and the structural formula is KCl. It has a molecular mass of 74.55. Potassium chloride, USP, occurs as a white granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Inactive ingredients: ethylcellulose, gelatin, magnesium stearate, sodium lauryl sulfate, titanium dioxide and edible black ink. The 10 mEq capsules also contain black iron oxide, FD&C blue No.1 and FD&C red No.3.</Description>
</NDC>
<NDC>
<NDCCode>63304-165-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (63304-165-05)</PackageDescription>
<NDC11Code>63304-0165-05</NDC11Code>
<ProductNDC>63304-165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077977</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).</IndicationAndUsage>
<Description>Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-166-05</NDCCode>
<PackageDescription>500 TABLET, COATED in 1 BOTTLE (63304-166-05)</PackageDescription>
<NDC11Code>63304-0166-05</NDC11Code>
<ProductNDC>63304-166</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20070206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077977</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Major Depressive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of major depressive disorder in adults. The efficacy of sertraline hydrochloride in the treatment of a major depressive episode was established in six to eight week controlled trials of adult outpatients whose diagnoses corresponded most closely to the DSM-III category of major depressive disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). A major depressive episode implies a prominent and relatively persistent depressed or dysphoric mood that usually interferes with daily functioning (nearly every day for at least 2 weeks); it should include at least 4 of the following 8 symptoms: change in appetite, change in sleep, psychomotor agitation or retardation, loss of interest in usual activities or decrease in sexual drive, increased fatigue, feelings of guilt or worthlessness, slowed thinking or impaired concentration, and a suicide attempt or suicidal ideation. The antidepressant action of sertraline hydrochloride in hospitalized depressed patients has not been adequately studied. The efficacy of sertraline hydrochloride in maintaining an antidepressant response for up to 44 weeks following 8 weeks of open-label acute treatment (52 weeks total) was demonstrated in a placebo-controlled trial. The usefulness of the drug in patients receiving sertraline hydrochloride for extended periods should be reevaluated periodically (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-Compulsive Disorder–Sertraline hydrochloride tablets are indicated for the treatment of obsessions and compulsions in patients with obsessive-compulsive disorder (OCD), as defined in the DSM-III-R; i.e., the obsessions or compulsions cause marked distress, are time-consuming, or significantly interfere with social or occupational functioning. The efficacy of sertraline hydrochloride was established in 12-week trials with obsessive-compulsive outpatients having diagnoses of obsessive-compulsive disorder as defined according to DSM-III or DSM-III-R criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Obsessive-compulsive disorder is characterized by recurrent and persistent ideas, thoughts, impulses, or images (obsessions) that are ego-dystonic and/or repetitive, purposeful, and intentional behaviors (compulsions) that are recognized by the person as excessive or unreasonable. The efficacy of sertraline hydrochloride in maintaining a response, in patients with OCD who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Panic Disorder–Sertraline hydrochloride is indicated for the treatment of panic disorder in adults, with or without agoraphobia, as defined in DSM-IV. Panic disorder is characterized by the occurrence of unexpected panic attacks and associated concern about having additional attacks, worry about the implications or consequences of the attacks, and/or a significant change in behavior related to the attacks. The efficacy of sertraline hydrochloride was established in three 10 to 12 week trials in adult panic disorder patients whose diagnoses corresponded to the DSM-III-R category of panic disorder (see Clinical Trials under CLINICAL PHARMACOLOGY). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, i.e., a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. The efficacy of sertraline hydrochloride in maintaining a response, in adult patients with panic disorder who responded during a 52-week treatment phase while taking sertraline hydrochloride and were then observed for relapse during a period of up to 28 weeks, was demonstrated in a placebo-controlled trial (see Clinical Trials under CLINICAL PHARMACOLOGY). Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Posttraumatic Stress Disorder (PTSD)–Sertraline hydrochloride is indicated for the treatment of posttraumatic stress disorder in adults. The efficacy of sertraline hydrochloride in the treatment of PTSD was established in two 12-week placebo-controlled trials of adult outpatients whose diagnosis met criteria for the DSM-III-R category of PTSD (see Clinical Trials under CLINICAL PHARMACOLOGY). PTSD, as defined by DSM-III-R/IV, requires exposure to a traumatic event that involved actual or threatened death or serious injury, or threat to the physical integrity of self or others, and a response which involves intense fear, helplessness, or horror. Symptoms that occur as a result of exposure to the traumatic event include reexperiencing of the event in the form of intrusive thoughts, flashbacks or dreams, and intense psychological distress and physiological reactivity on exposure to cues to the event; avoidance of situations reminiscent of the traumatic event, inability to recall details of the event, and/or numbing of general responsiveness manifested as diminished interest in significant activities, estrangement from others, restricted range of affect, or sense of foreshortened future; and symptoms of autonomic arousal including hypervigilance, exaggerated startle response, sleep disturbance, impaired concentration, and irritability or outbursts of anger. A PTSD diagnosis requires that the symptoms are present for at least a month and that they cause clinically significant distress or impairment in social, occupational, or other important areas of functioning. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with PTSD for up to 28 weeks following 24 weeks of open-label treatment was demonstrated in a placebo-controlled trial. Nevertheless, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Premenstrual Dysphoric Disorder (PMDD) – Sertraline hydrochloride is indicated for the treatment of premenstrual dysphoric disorder (PMDD) in adults. The efficacy of sertraline hydrochloride in the treatment of PMDD was established in 2 placebo-controlled trials of female adult outpatients treated for 3 menstrual cycles who met criteria for the DSM-III-R/IV category of PMDD (see Clinical Trials under CLINICAL PHARMACOLOGY). The essential features of PMDD include markedly depressed mood, anxiety or tension, affective lability, and persistent anger or irritability. Other features include decreased interest in activities, difficulty concentrating, lack of energy, change in appetite or sleep, and feeling out of control. Physical symptoms associated with PMDD include breast tenderness, headache, joint and muscle pain, bloating and weight gain. These symptoms occur regularly during the luteal phase and remit within a few days following onset of menses; the disturbance markedly interferes with work or school or with usual social activities and relationships with others. In making the diagnosis, care should be taken to rule out other cyclical mood disorders that may be exacerbated by treatment with an antidepressant. The effectiveness of sertraline hydrochloride in long-term use, that is, for more than 3 menstrual cycles, has not been systematically evaluated in controlled trials. Therefore, the physician who elects to use sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see DOSAGE AND ADMINISTRATION). Social Anxiety Disorder – Sertraline hydrochloride tablets are indicated for the treatment of social anxiety disorder, also known as social phobia in adults. The efficacy of sertraline hydrochloride in the treatment of social anxiety disorder was established in two placebo-controlled trials of adult outpatients with a diagnosis of social anxiety disorder as defined by DSM-IV criteria (see Clinical Trials under CLINICAL PHARMACOLOGY). Social anxiety disorder, as defined by DSM-IV, is characterized by marked and persistent fear of social or performance situations involving exposure to unfamiliar people or possible scrutiny by others and by fears of acting in a humiliating or embarrassing way. Exposure to the feared social situation almost always provokes anxiety and feared social or performance situations are avoided or else are endured with intense anxiety or distress. In addition, patients recognize that the fear is excessive or unreasonable and the avoidance and anticipatory anxiety of the feared situation is associated with functional impairment or marked distress. The efficacy of sertraline hydrochloride in maintaining a response in adult patients with social anxiety disorder for up to 24 weeks following 20 weeks of sertraline hydrochloride treatment was demonstrated in a placebo-controlled trial. Physicians who prescribe sertraline hydrochloride for extended periods should periodically re-evaluate the long-term usefulness of the drug for the individual patient (see Clinical Trials under CLINICAL PHARMACOLOGY).</IndicationAndUsage>
<Description>Sertraline hydrochloride is a selective serotonin reuptake inhibitor (SSRI) for oral administration. It has a molecular weight of 342.7. Sertraline hydrochloride has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The molecular formula C17H17NCl2HCl is represented by the following molecular structure. Sertraline hydrochloride is a white to off-white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride is supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50, 100, 150, and 200 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate dihydrate, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-193-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (63304-193-05)</PackageDescription>
<NDC11Code>63304-0193-05</NDC11Code>
<ProductNDC>63304-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milnacipran Hydrochloride</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205088</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63304-194-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (63304-194-05)</PackageDescription>
<NDC11Code>63304-0194-05</NDC11Code>
<ProductNDC>63304-194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milnacipran Hydrochloride</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205088</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63304-212-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (63304-212-05)</PackageDescription>
<NDC11Code>63304-0212-05</NDC11Code>
<ProductNDC>63304-212</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milnacipran Hydrochloride</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205088</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63304-213-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (63304-213-05)</PackageDescription>
<NDC11Code>63304-0213-05</NDC11Code>
<ProductNDC>63304-213</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Milnacipran Hydrochloride</ProprietaryName>
<NonProprietaryName>Milnacipran Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141127</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205088</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>MILNACIPRAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Norepinephrine Uptake Inhibitors [MoA],Serotonin and Norepinephrine Reuptake Inhibitor [EPC],Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63304-218-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-218-05)</PackageDescription>
<NDC11Code>63304-0218-05</NDC11Code>
<ProductNDC>63304-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-219-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-219-05)</PackageDescription>
<NDC11Code>63304-0219-05</NDC11Code>
<ProductNDC>63304-219</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-220-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-220-05)</PackageDescription>
<NDC11Code>63304-0220-05</NDC11Code>
<ProductNDC>63304-220</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-221-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-221-05)</PackageDescription>
<NDC11Code>63304-0221-05</NDC11Code>
<ProductNDC>63304-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-222-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-222-05)</PackageDescription>
<NDC11Code>63304-0222-05</NDC11Code>
<ProductNDC>63304-222</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-223-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-223-05)</PackageDescription>
<NDC11Code>63304-0223-05</NDC11Code>
<ProductNDC>63304-223</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-224-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (63304-224-05)</PackageDescription>
<NDC11Code>63304-0224-05</NDC11Code>
<ProductNDC>63304-224</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203506</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA],Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxymorphone hydrochloride extended-release tablets are indicated for the management of pain severe enough to require daily, around-the-clock, long-term opioid treatment and for which alternative treatment options are inadequate. Limitations of Usage. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses, and because of the greater risks of overdose and death with extended-release opioid formulations, reserve oxymorphone hydrochloride extended-release tablets for use in patients for whom alternative treatment options (e.g., non-opioid analgesics or immediate-release opioids) are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain. Oxymorphone hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone hydrochloride extended-release tablets are for oral use and contain oxymorphone, a semi-synthetic opioid analgesic. Oxymorphone hydrochloride extended-release tablets are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg, and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride, USP per tablet. The tablets contain the following inactive ingredients: hydrophobic colloidal silica, hypromellose, polyethylene glycol, polyvinyl alcohol, silicified microcrystalline cellulose, sodium stearyl fumarate, talc, and titanium dioxide. In addition, the 5 mg and 30 mg tablets contain FD&C red No. 40. The 7.5 mg tablets contain ferric oxide black, and ferric oxide yellow. The 10 mg tablets contain ferric oxide yellow and FD&C yellow No. 6. The 20 mg tablets contain D&C yellow No. 10, FD&C blue No. 1, and FD&C yellow No. 6. The 30 mg tablets contain FD&C blue No. 1 and FD&C yellow No. 6. The 40 mg tablets contain D&C yellow No. 10 and FD&C yellow No. 6. The chemical name of oxymorphone hydrochloride is 4, 5α -epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride, a white to off-white powder, which is sparingly soluble in alcohol, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The molecular formula of oxymorphone hydrochloride is C17H19NO4.HCl. The pKa1 and pKa2 of oxymorphone at 37° C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37° C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows.</Description>
</NDC>
<NDC>
<NDCCode>63304-254-05</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (63304-254-05)</PackageDescription>
<NDC11Code>63304-0254-05</NDC11Code>
<ProductNDC>63304-254</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pioglitazone</ProprietaryName>
<NonProprietaryName>Pioglitazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130207</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202467</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc</LabelerName>
<SubstanceName>PIOGLITAZONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Peroxisome Proliferator Receptor alpha Agonist [EPC],Peroxisome Proliferator Receptor gamma Agonist [EPC],Peroxisome Proliferator-activated Receptor Activity [MoA],PPAR alpha [Chemical/Ingredient],PPAR gamma [Chemical/Ingredient],Thiazolidinedione [EPC],Thiazolidinediones [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-01-22</LastUpdate>
</NDC>
</NDCList>