{
"NDC": [
{
"NDCCode": "63304-725-82",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE (63304-725-82)",
"NDC11Code": "63304-0725-82",
"ProductNDC": "63304-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-726-82",
"PackageDescription": "12 TABLET, FILM COATED in 1 BOTTLE (63304-726-82)",
"NDC11Code": "63304-0726-82",
"ProductNDC": "63304-726",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-725-01",
"PackageDescription": "100 TABLET, FILM COATED in 1 BOTTLE (63304-725-01)",
"NDC11Code": "63304-0725-01",
"ProductNDC": "63304-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-725-05",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (63304-725-05)",
"NDC11Code": "63304-0725-05",
"ProductNDC": "63304-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-725-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (63304-725-60)",
"NDC11Code": "63304-0725-60",
"ProductNDC": "63304-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-725-77",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (63304-725-77) > 1 TABLET, FILM COATED in 1 BLISTER PACK (63304-725-11)",
"NDC11Code": "63304-0725-77",
"ProductNDC": "63304-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clarithromycin",
"NonProprietaryName": "Clarithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20050525",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065174",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "CLARITHROMYCIN",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics."
},
{
"NDCCode": "63304-008-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-008-30) ",
"NDC11Code": "63304-0008-30",
"ProductNDC": "63304-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210428",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2018-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180207",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "63304-009-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-009-30) ",
"NDC11Code": "63304-0009-30",
"ProductNDC": "63304-009",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210428",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2018-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180207",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "63304-010-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-010-30) ",
"NDC11Code": "63304-0010-30",
"ProductNDC": "63304-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210428",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2018-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180207",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "63304-011-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-011-30) ",
"NDC11Code": "63304-0011-30",
"ProductNDC": "63304-011",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metoprolol Succinate",
"NonProprietaryName": "Metoprolol Succinate",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA210428",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "METOPROLOL SUCCINATE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2018-02-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180207",
"SamplePackage": "N",
"IndicationAndUsage": "Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).",
"Description": "Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "63304-047-30",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-047-30) ",
"NDC11Code": "63304-0047-30",
"ProductNDC": "63304-047",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pregabalin",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20210413",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211889",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "82.5",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2025-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20210413",
"SamplePackage": "N",
"IndicationAndUsage": "Pregabalin extended-release tablets are indicated for the management of:.",
"Description": "Pregabalin extended-release tablets are for oral use and contain pregabalin. Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is:."
},
{
"NDCCode": "63304-433-03",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (63304-433-03)",
"NDC11Code": "63304-0433-03",
"ProductNDC": "63304-433",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levocetirizine Dihydrochloride",
"NonProprietaryName": "Levocetirizine Dihydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201653",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "LEVOCETIRIZINE DIHYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).",
"Description": "Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide."
},
{
"NDCCode": "63304-433-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-433-10)",
"NDC11Code": "63304-0433-10",
"ProductNDC": "63304-433",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levocetirizine Dihydrochloride",
"NonProprietaryName": "Levocetirizine Dihydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201653",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "LEVOCETIRIZINE DIHYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).",
"Description": "Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide."
},
{
"NDCCode": "63304-433-69",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (63304-433-69) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63304-0433-69",
"ProductNDC": "63304-433",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levocetirizine Dihydrochloride",
"NonProprietaryName": "Levocetirizine Dihydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20130225",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201653",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "LEVOCETIRIZINE DIHYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).",
"Description": "Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide."
},
{
"NDCCode": "0143-9382-10",
"PackageDescription": "10 VIAL in 1 CARTON (0143-9382-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "00143-9382-10",
"ProductNDC": "0143-9382",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20250922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250922",
"SamplePackage": "N",
"Description": "Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "0143-9383-10",
"PackageDescription": "10 VIAL in 1 CARTON (0143-9383-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL",
"NDC11Code": "00143-9383-10",
"ProductNDC": "0143-9383",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20250922",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2025-10-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250922",
"SamplePackage": "N",
"Description": "Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "0143-9477-10",
"PackageDescription": "10 VIAL in 1 CARTON (0143-9477-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9477-01) ",
"NDC11Code": "00143-9477-10",
"ProductNDC": "0143-9477",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20251031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"Description": "Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "0143-9478-10",
"PackageDescription": "10 VIAL in 1 CARTON (0143-9478-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9478-01) ",
"NDC11Code": "00143-9478-10",
"ProductNDC": "0143-9478",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20251031",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214402",
"LabelerName": "Hikma Pharmaceuticals USA Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-06-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251031",
"SamplePackage": "N",
"Description": "Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber."
},
{
"NDCCode": "0264-3193-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3193-11) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3193-11",
"ProductNDC": "0264-3193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride And Dextrose",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100506",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050821",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100506",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for Injection and Dextrose Injection is a cephalosporin antibacterial indicated in the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia (1.1) , 2 Empiric therapy for febrile neutropenic patients (1.2) , 3 Uncomplicated and complicated urinary tract infections (1.3) , 4 Uncomplicated skin and skin structure infections (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) (1.5).",
"Description": "Cefepime hydrochloride, USP is a semi-synthetic, broad spectrum, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride (monohydrate) has a molecular mass of 571.50 and a molecular formula of C19H25ClN6O5S2HClH2O. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection USP and Dextrose Injection USP in the DUPLEX® dual chamber container is supplied for intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection USP and Dextrose Injection USP is supplied as a sterile, nonpyrogenic, single-dose packaged combination of cefepime hydrochloride with L-arginine (drug chamber) and 50 mL of 5% dextrose injection (diluent) in the DUPLEX® sterile container. The powder chamber of the DUPLEX® container contains a sterile, dry mixture of cefepime hydrochloride and L-arginine. It contains the equivalent of not less than 90.0 percent and not more than 115.0 percent of the labeled amount of cefepime (C19H24N6O5S2). The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the reconstituted solution at 4.0 - 6.0. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. The DUPLEX® container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. Each 50 mL contains cefepime hydrochloride equivalent to either 1 gram or 2 grams of cefepime. Reconstituted solutions of Cefepime for Injection USP and Dextrose Injection USP range in color from colorless to amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container is supported by USP biological evaluation procedures."
},
{
"NDCCode": "0264-3195-11",
"PackageDescription": "24 CONTAINER in 1 CASE (0264-3195-11) / 50 mL in 1 CONTAINER",
"NDC11Code": "00264-3195-11",
"ProductNDC": "0264-3195",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefepime Hydrochloride And Dextrose",
"NonProprietaryName": "Cefepime Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20100506",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050821",
"LabelerName": "B. Braun Medical Inc.",
"SubstanceName": "CEFEPIME HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "g/50mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100506",
"SamplePackage": "N",
"IndicationAndUsage": "Cefepime for Injection and Dextrose Injection is a cephalosporin antibacterial indicated in the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia (1.1) , 2 Empiric therapy for febrile neutropenic patients (1.2) , 3 Uncomplicated and complicated urinary tract infections (1.3) , 4 Uncomplicated skin and skin structure infections (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) (1.5).",
"Description": "Cefepime hydrochloride, USP is a semi-synthetic, broad spectrum, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride (monohydrate) has a molecular mass of 571.50 and a molecular formula of C19H25ClN6O5S2HClH2O. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection USP and Dextrose Injection USP in the DUPLEX® dual chamber container is supplied for intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection USP and Dextrose Injection USP is supplied as a sterile, nonpyrogenic, single-dose packaged combination of cefepime hydrochloride with L-arginine (drug chamber) and 50 mL of 5% dextrose injection (diluent) in the DUPLEX® sterile container. The powder chamber of the DUPLEX® container contains a sterile, dry mixture of cefepime hydrochloride and L-arginine. It contains the equivalent of not less than 90.0 percent and not more than 115.0 percent of the labeled amount of cefepime (C19H24N6O5S2). The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the reconstituted solution at 4.0 - 6.0. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. The DUPLEX® container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. Each 50 mL contains cefepime hydrochloride equivalent to either 1 gram or 2 grams of cefepime. Reconstituted solutions of Cefepime for Injection USP and Dextrose Injection USP range in color from colorless to amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container is supported by USP biological evaluation procedures."
},
{
"NDCCode": "10135-725-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (10135-725-01) ",
"NDC11Code": "10135-0725-01",
"ProductNDC": "10135-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fluphenazine Hydrochloride",
"NonProprietaryName": "Fluphenazine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20210601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214674",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "FLUPHENAZINE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2025-11-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210601",
"SamplePackage": "N",
"IndicationAndUsage": "Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.",
"Description": "Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium."
},
{
"NDCCode": "10695-114-06",
"PackageDescription": ".725 kg in 1 CONTAINER (10695-114-06) ",
"NDC11Code": "10695-0114-06",
"ProductNDC": "10695-114",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Naltrexone Hcl",
"DosageFormName": "POWDER",
"StartMarketingDate": "20250227",
"MarketingCategoryName": "BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING",
"LabelerName": "Willow Birch Pharma, Inc.",
"SubstanceName": "NALTREXONE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-03-04",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "27-FEB-25"
},
{
"NDCCode": "11527-725-07",
"PackageDescription": "1 TUBE in 1 CARTON (11527-725-07) / 20 g in 1 TUBE",
"NDC11Code": "11527-0725-07",
"ProductNDC": "11527-725",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sheffield Advanced Scar Gel",
"NonProprietaryName": "Advanced Scar Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20211014",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Sheffield Pharmaceuticals LLC",
"SubstanceName": "ALLANTOIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2023-12-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211014",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily protects and helps chapped or cracked skin."
},
{
"NDCCode": "11559-725-01",
"PackageDescription": "1 CYLINDER in 1 CARTON (11559-725-01) > 3.8 g in 1 CYLINDER",
"NDC11Code": "11559-0725-01",
"ProductNDC": "11559-725",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lip Conditioner Spf 15",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "19980101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "ESTEE LAUDER INC",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": "3.5",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "11673-725-27",
"PackageDescription": "1 TUBE in 1 CARTON (11673-725-27) / 20 g in 1 TUBE",
"NDC11Code": "11673-0725-27",
"ProductNDC": "11673-725",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Target Advanced Scar Gel",
"NonProprietaryName": "Advanced Scar Gel",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200815",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M016",
"LabelerName": "Target Corporation",
"SubstanceName": "ALLANTOIN",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Status": "Active",
"LastUpdate": "2026-04-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200815",
"SamplePackage": "N",
"IndicationAndUsage": "Temporarily protects and helps chapped or cracked skin."
},
{
"NDCCode": "12546-725-24",
"PackageDescription": "1 KIT in 1 KIT (12546-725-24) * 80 LOZENGE in 1 BAG (12546-109-80) * 80 LOZENGE in 1 BAG (12546-116-80) * 80 LOZENGE in 1 BAG (12546-110-80) ",
"NDC11Code": "12546-0725-24",
"ProductNDC": "12546-725",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Halls",
"ProprietaryNameSuffix": "Variety Pack Mentholyptus Honey Lemon Cherry",
"NonProprietaryName": "Menthol",
"DosageFormName": "KIT",
"RouteName": "ORAL",
"StartMarketingDate": "20260720",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "Mondelez Global LLC",
"Status": "Active",
"LastUpdate": "2026-07-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260720",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves: 1 cough due to cold, 2 occasional minor irritation or sore throat."
},
{
"NDCCode": "13537-725-01",
"PackageDescription": "50 mL in 1 BOTTLE (13537-725-01)",
"NDC11Code": "13537-0725-01",
"ProductNDC": "13537-725",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Bravio Christian Meier Antiperspirant Roll-on Deodorant Fm",
"NonProprietaryName": "Aluminum Sesquichlorohydrate",
"DosageFormName": "EMULSION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151222",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part350",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "ALUMINUM SESQUICHLOROHYDRATE",
"StrengthNumber": ".136",
"StrengthUnit": "g/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Reduces underarm perspiration."
},
{
"NDCCode": "16571-725-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (16571-725-01) ",
"NDC11Code": "16571-0725-01",
"ProductNDC": "16571-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213126",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "375",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220405",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16571-725-50",
"PackageDescription": "500 TABLET in 1 BOTTLE (16571-725-50) ",
"NDC11Code": "16571-0725-50",
"ProductNDC": "16571-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorzoxazone",
"NonProprietaryName": "Chlorzoxazone",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220405",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA213126",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "CHLORZOXAZONE",
"StrengthNumber": "375",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]",
"Status": "Active",
"LastUpdate": "2023-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220405",
"SamplePackage": "N",
"IndicationAndUsage": "Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.",
"Description": "For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16714-725-01",
"PackageDescription": "1 VIAL in 1 CARTON (16714-725-01) > 2 mL in 1 VIAL",
"NDC11Code": "16714-0725-01",
"ProductNDC": "16714-725",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irinotecan Hydrochloride",
"NonProprietaryName": "Irinotecan Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170615",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077219",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "IRINOTECAN HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-07-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20170615",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63304-725-82</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (63304-725-82)</PackageDescription>
<NDC11Code>63304-0725-82</NDC11Code>
<ProductNDC>63304-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-726-82</NDCCode>
<PackageDescription>12 TABLET, FILM COATED in 1 BOTTLE (63304-726-82)</PackageDescription>
<NDC11Code>63304-0726-82</NDC11Code>
<ProductNDC>63304-726</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-725-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (63304-725-01)</PackageDescription>
<NDC11Code>63304-0725-01</NDC11Code>
<ProductNDC>63304-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-725-05</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (63304-725-05)</PackageDescription>
<NDC11Code>63304-0725-05</NDC11Code>
<ProductNDC>63304-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-725-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (63304-725-60)</PackageDescription>
<NDC11Code>63304-0725-60</NDC11Code>
<ProductNDC>63304-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-725-77</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (63304-725-77) > 1 TABLET, FILM COATED in 1 BLISTER PACK (63304-725-11)</PackageDescription>
<NDC11Code>63304-0725-77</NDC11Code>
<ProductNDC>63304-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clarithromycin</ProprietaryName>
<NonProprietaryName>Clarithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20050525</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065174</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>CLARITHROMYCIN</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC],Macrolides [CS],Cytochrome P450 3A4 Inhibitors [MoA],Cytochrome P450 3A Inhibitors [MoA],P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Clarithromycin tablets, USP and clarithromycin for oral suspension, USP are indicated for the treatment of mild to moderate infections caused by susceptible isolates of the designated bacteria in the conditions as listed below. Adults (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes (The usual drug of choice in the treatment and prevention of streptococcal infections and the prophylaxis of rheumatic fever is penicillin administered by either the intramuscular or the oral route. Clarithromycin is generally effective in the eradication of S. pyogenes from the nasopharynx; however, data establishing the efficacy of clarithromycin in the subsequent prevention of rheumatic fever are not available at present). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute bacterial exacerbation of chronic bronchitis due to Haemophilus influenzae, Haemophilus parainfluenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Community-Acquired Pneumonia due to Haemophilus influenzae, Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Clarithromycin tablets in combination with amoxicillin and PREVACID (lansoprazole) or PRILOSEC (omeprazole) Delayed-Release Capsules, as triple therapy, are indicated for the treatment of patients with Helicobacter pylori infection and duodenal ulcer disease (active or five-year history of duodenal ulcer) to eradicate H. pylori. Clarithromycin tablets in combination with PRILOSEC (omeprazole) capsules or TRITEC (ranitidine bismuth citrate) tablets are also indicated for the treatment of patients with an active duodenal ulcer associated with H. pylori infection. However, regimens which contain clarithromycin as the single antimicrobial agent are more likely to be associated with the development of clarithromycin resistance among patients who fail therapy. Clarithromycin-containing regimens should not be used in patients with known or suspected clarithromycin resistant isolates because the efficacy of treatment is reduced in this setting. In patients who fail therapy, susceptibility testing should be done if possible. If resistance to clarithromycin is demonstrated, a non-clarithromycin-containing therapy is recommended. (For information on development of resistance see Microbiology section.) The eradication of H. pylori has been demonstrated to reduce the risk of duodenal ulcer recurrence. Children (clarithromycin immediate-release tablets and clarithromycin for oral suspension). Pharyngitis/Tonsillitis due to Streptococcus pyogenes. Community-Acquired Pneumonia due to Mycoplasma pneumoniae, Streptococcus pneumoniae, or Chlamydophila pneumoniae (TWAR). Acute maxillary sinusitis due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. Acute otitis media due to Haemophilus influenzae, Moraxella catarrhalis, or Streptococcus pneumoniae. NOTE: For information on otitis media, see CLINICAL STUDIES - Otitis Media. Uncomplicated skin and skin structure infections due to Staphylococcus aureus, or Streptococcus pyogenes (Abscesses usually require surgical drainage.). Disseminated mycobacterial infections due to Mycobacterium avium, or Mycobacterium intracellulare. Prophylaxis. Clarithromycin immediate-release tablets and clarithromycin for oral suspension are indicated for the prevention of disseminated Mycobacterium avium complex (MAC) disease in patients with advanced HIV infection. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clarithromycin and other antibacterial drugs, clarithromycin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Clarithromycin is a semi-synthetic macrolide antibiotic. Chemically, it is 6-0-methylerythromycin. The molecular formula is C38H69NO13, and the molecular weight is 747.95. The structural formula is. Clarithromycin is a white to off-white crystalline powder. It is soluble in acetone, slightly soluble in methanol, ethanol, and acetonitrile, and practically insoluble in water. Clarithromycin is available as immediate-release tablets, USP and granules for oral suspension, USP. Each light yellow capsule-shaped film-coated immediate-release clarithromycin tablet contains 250 mg or 500 mg of clarithromycin, USP and the following inactive ingredients: ammonium hydroxide, colloidal silicon dioxide, croscarmellose sodium, D&C Yellow No. 10 lake, iron-oxide black, hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, propylene glycol, shellac glaze, stearic acid, talc, and titanium dioxide. After constitution, each 5 mL of clarithromycin for oral suspension contains 125 mg or 250 mg of clarithromycin, USP. Each bottle of clarithromycin for oral suspension, contains 1250 mg (50 mL size), 2500 mg (50 and 100 mL sizes) or 5000 mg (100 mL size) of clarithromycin and the following inactive ingredients: alginic acid, aspartame*, castor oil, citric acid anhydrous, colloidal silicon dioxide, croscarmellose sodium, tutti fruitti flavor, hydroxypropyl cellulose, hypromellose, hypromellose phthalate, maltodextrin, povidone, peppermint flavor, sodium benzoate, sodium chloride, sodium citrate dihydrate, sucrose, titanium dioxide, xanthan gum. *See PRECAUTIONS – Information for Patient/ Phenylketonurics.</Description>
</NDC>
<NDC>
<NDCCode>63304-008-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-008-30) </PackageDescription>
<NDC11Code>63304-0008-30</NDC11Code>
<ProductNDC>63304-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210428</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-009-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-009-30) </PackageDescription>
<NDC11Code>63304-0009-30</NDC11Code>
<ProductNDC>63304-009</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210428</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-010-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-010-30) </PackageDescription>
<NDC11Code>63304-0010-30</NDC11Code>
<ProductNDC>63304-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210428</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-011-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE (63304-011-30) </PackageDescription>
<NDC11Code>63304-0011-30</NDC11Code>
<ProductNDC>63304-011</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metoprolol Succinate</ProprietaryName>
<NonProprietaryName>Metoprolol Succinate</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA210428</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>METOPROLOL SUCCINATE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-02-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metoprolol succinate extended-release capsules are beta1-selective adrenoceptor blocking agent indicated for the treatment of: : 1 Hypertension, to lower blood pressure. Lowering blood pressure reduces the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. (1.1) , 2 Angina Pectoris. (1.2) , 3 Heart Failure, to reduce the risk of cardiovascular mortality and heart-failure hospitalization in patients with heart failure. (1.3).</IndicationAndUsage>
<Description>Metoprolol succinate, is a beta1-selective (cardioselective) adrenoceptor blocking agent, for oral administration, available as extended-release capsules. Metoprolol succinate extended-release capsules have been formulated to provide a controlled and predictable release of metoprolol for once-daily administration. The extended-release capsules comprise a multiple unit system containing metoprolol succinate in a multitude of controlled release pellets. Each pellet acts as a separate drug delivery unit and is designed to deliver metoprolol continuously over the dosage interval. The extended-release capsules contain 10.24 mg, 20.48 mg, 40.96 mg, and 81.92 mg of metoprolol free base, present as 23.75 mg, 47.5 mg, 95 mg, and 190 mg of metoprolol succinate and are equivalent to 25 mg, 50 mg, 100 mg, and 200 mg of metoprolol tartrate, USP, respectively. Its chemical name is (±)-1-(Isopropylamino)-3-[p-(2-methoxyethyl)phenoxy]-2-propanol succinate (2:1) (salt). Its structural formula is. Metoprolol succinate, USP is a white to off-white powder with a molecular weight of 652.82. It is freely soluble in water, soluble in methanol, sparingly soluble in alcohol, slightly soluble in isopropyl alcohol. Inactive ingredients: ethyl cellulose, hypromellose, polyethylene glycol 400, polyethylene glycol 6000, sugar spheres (corn starch and sucrose), talc and triethyl citrate. The capsule shell and imprinting ink has the following composition: ferric oxide yellow (25 mg, 50 mg and 200 mg), ferrosoferric oxide, gelatin, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-047-30</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-047-30) </PackageDescription>
<NDC11Code>63304-0047-30</NDC11Code>
<ProductNDC>63304-047</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pregabalin</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210413</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211889</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>82.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210413</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Pregabalin extended-release tablets are indicated for the management of:.</IndicationAndUsage>
<Description>Pregabalin extended-release tablets are for oral use and contain pregabalin. Pregabalin is described chemically as (S)-3-(aminomethyl)-5-methylhexanoic acid. The molecular formula is C8H17NO2 and the molecular weight is 159.23. The chemical structure of pregabalin is:.</Description>
</NDC>
<NDC>
<NDCCode>63304-433-03</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (63304-433-03)</PackageDescription>
<NDC11Code>63304-0433-03</NDC11Code>
<ProductNDC>63304-433</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levocetirizine Dihydrochloride</ProprietaryName>
<NonProprietaryName>Levocetirizine Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201653</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVOCETIRIZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).</IndicationAndUsage>
<Description>Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-433-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-433-10)</PackageDescription>
<NDC11Code>63304-0433-10</NDC11Code>
<ProductNDC>63304-433</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levocetirizine Dihydrochloride</ProprietaryName>
<NonProprietaryName>Levocetirizine Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201653</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVOCETIRIZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).</IndicationAndUsage>
<Description>Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-433-69</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (63304-433-69) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63304-0433-69</NDC11Code>
<ProductNDC>63304-433</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levocetirizine Dihydrochloride</ProprietaryName>
<NonProprietaryName>Levocetirizine Dihydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130225</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201653</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>LEVOCETIRIZINE DIHYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA],Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Levocetirizine dihydrochloride tablets are a histamine H 1-receptor antagonist indicated for: 1 The relief of symptoms associated with seasonal and perennial allergic rhinitis (1.1, 1.2), 2 The treatment of the uncomplicated skin manifestations of chronic idiopathic urticaria (1.3).</IndicationAndUsage>
<Description>Levocetirizine dihydrochloride, the active component of levocetirizine dihydrochloride tablets, is an orally active H 1-receptor antagonist. The chemical name is (R)-[2-[4-[(4-chlorophenyl) phenylmethyl]-1-piperazinyl] ethoxy] acetic acid dihydrochloride. Levocetirizine dihydrochloride is the R enantiomer of cetirizine hydrochloride, a racemic compound with antihistaminic properties. The molecular formula of levocetirizine dihydrochloride is C21H25ClN2O32HCl. The molecular weight is 461.82 and the chemical structure is shown below. Levocetirizine dihydrochloride is a white to off-white, crystalline powder and is soluble in water and methanol. Levocetirizine dihydrochloride 5 mg tablets are formulated as immediate release, white to off-white, oval-shaped, biconvex, scored, film-coated tablets, debossed with ‘R’ and ‘I’ on either side of the scoreline on one side and ‘7’ and ‘3’ on either side of the scoreline on the other side. Inactive ingredients are: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, and microcrystalline cellulose. The film-coating contains hypromellose, polyethylene glycol 400, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>0143-9382-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0143-9382-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>00143-9382-10</NDC11Code>
<ProductNDC>0143-9382</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20250922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>0143-9383-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0143-9383-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL</PackageDescription>
<NDC11Code>00143-9383-10</NDC11Code>
<ProductNDC>0143-9383</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20250922</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250922</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>0143-9477-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0143-9477-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9477-01) </PackageDescription>
<NDC11Code>00143-9477-10</NDC11Code>
<ProductNDC>0143-9477</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20251031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>0143-9478-10</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (0143-9478-10) / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (0143-9478-01) </PackageDescription>
<NDC11Code>00143-9478-10</NDC11Code>
<ProductNDC>0143-9478</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20251031</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214402</ApplicationNumber>
<LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251031</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Cefepime for Injection, USP (cefepime hydrochloride, USP) is a semi-synthetic, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0] oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride,72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection, USP is supplied for intramuscular or intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection, USP is a sterile, dry mixture of cefepime hydrochloride and L-arginine. The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the constituted solution at 4 to 6. Freshly constituted solutions of Cefepime for Injection, USP will range in color from pale yellow to amber.</Description>
</NDC>
<NDC>
<NDCCode>0264-3193-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3193-11) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3193-11</NDC11Code>
<ProductNDC>0264-3193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride And Dextrose</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100506</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050821</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for Injection and Dextrose Injection is a cephalosporin antibacterial indicated in the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia (1.1) , 2 Empiric therapy for febrile neutropenic patients (1.2) , 3 Uncomplicated and complicated urinary tract infections (1.3) , 4 Uncomplicated skin and skin structure infections (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) (1.5).</IndicationAndUsage>
<Description>Cefepime hydrochloride, USP is a semi-synthetic, broad spectrum, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride (monohydrate) has a molecular mass of 571.50 and a molecular formula of C19H25ClN6O5S2HClH2O. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection USP and Dextrose Injection USP in the DUPLEX® dual chamber container is supplied for intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection USP and Dextrose Injection USP is supplied as a sterile, nonpyrogenic, single-dose packaged combination of cefepime hydrochloride with L-arginine (drug chamber) and 50 mL of 5% dextrose injection (diluent) in the DUPLEX® sterile container. The powder chamber of the DUPLEX® container contains a sterile, dry mixture of cefepime hydrochloride and L-arginine. It contains the equivalent of not less than 90.0 percent and not more than 115.0 percent of the labeled amount of cefepime (C19H24N6O5S2). The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the reconstituted solution at 4.0 - 6.0. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. The DUPLEX® container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. Each 50 mL contains cefepime hydrochloride equivalent to either 1 gram or 2 grams of cefepime. Reconstituted solutions of Cefepime for Injection USP and Dextrose Injection USP range in color from colorless to amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>0264-3195-11</NDCCode>
<PackageDescription>24 CONTAINER in 1 CASE (0264-3195-11) / 50 mL in 1 CONTAINER</PackageDescription>
<NDC11Code>00264-3195-11</NDC11Code>
<ProductNDC>0264-3195</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefepime Hydrochloride And Dextrose</ProprietaryName>
<NonProprietaryName>Cefepime Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20100506</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050821</ApplicationNumber>
<LabelerName>B. Braun Medical Inc.</LabelerName>
<SubstanceName>CEFEPIME HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>g/50mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100506</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefepime for Injection and Dextrose Injection is a cephalosporin antibacterial indicated in the treatment of the following infections caused by susceptible strains of the designated microorganisms: : 1 Pneumonia (1.1) , 2 Empiric therapy for febrile neutropenic patients (1.2) , 3 Uncomplicated and complicated urinary tract infections (1.3) , 4 Uncomplicated skin and skin structure infections (1.4), 5 Complicated intra-abdominal infections (used in combination with metronidazole) (1.5).</IndicationAndUsage>
<Description>Cefepime hydrochloride, USP is a semi-synthetic, broad spectrum, cephalosporin antibacterial for parenteral administration. The chemical name is 1-[[(6R,7R)-7-[2-(2-amino-4-thiazolyl)-glyoxylamido]-2-carboxy-8-oxo-5-thia-1-azabicyclo[4.2.0]oct-2-en-3-yl]methyl]-1-methylpyrrolidinium chloride, 72-(Z)-(O-methyloxime), monohydrochloride, monohydrate, which corresponds to the following structural formula. Cefepime hydrochloride (monohydrate) has a molecular mass of 571.50 and a molecular formula of C19H25ClN6O5S2HClH2O. Cefepime hydrochloride is a white to pale yellow powder. Cefepime hydrochloride contains the equivalent of not less than 825 mcg and not more than 911 mcg of cefepime (C19H24N6O5S2) per mg, calculated on an anhydrous basis. It is highly soluble in water. Cefepime for Injection USP and Dextrose Injection USP in the DUPLEX® dual chamber container is supplied for intravenous administration in strengths equivalent to 1 g and 2 g of cefepime. Cefepime for Injection USP and Dextrose Injection USP is supplied as a sterile, nonpyrogenic, single-dose packaged combination of cefepime hydrochloride with L-arginine (drug chamber) and 50 mL of 5% dextrose injection (diluent) in the DUPLEX® sterile container. The powder chamber of the DUPLEX® container contains a sterile, dry mixture of cefepime hydrochloride and L-arginine. It contains the equivalent of not less than 90.0 percent and not more than 115.0 percent of the labeled amount of cefepime (C19H24N6O5S2). The L-arginine, at an approximate concentration of 725 mg/g of cefepime, is added to control the pH of the reconstituted solution at 4.0 - 6.0. The diluent chamber contains Dextrose Injection USP, an iso-osmotic diluent using Hydrous Dextrose USP in Water for Injection USP. Dextrose Injection USP is sterile, nonpyrogenic, and contains no bacteriostatic or antimicrobial agents. Its empirical formula is C6H12O6H2O and its molecular weight is 198.17. Hydrous Dextrose USP has the following structural (molecular) formula. The DUPLEX® container is a flexible dual chamber container. After removing the peelable foil strip, activating the seals, and thoroughly mixing, the reconstituted drug product is hyperosmotic and is intended for single intravenous use. Each 50 mL contains cefepime hydrochloride equivalent to either 1 gram or 2 grams of cefepime. Reconstituted solutions of Cefepime for Injection USP and Dextrose Injection USP range in color from colorless to amber. The DUPLEX® dual chamber container is made from a specially formulated material. The product (diluent and drug) contact layer is a mixture of thermoplastic rubber and a polypropylene ethylene copolymer that contains no plasticizers. The safety of the container is supported by USP biological evaluation procedures.</Description>
</NDC>
<NDC>
<NDCCode>10135-725-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (10135-725-01) </PackageDescription>
<NDC11Code>10135-0725-01</NDC11Code>
<ProductNDC>10135-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fluphenazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Fluphenazine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214674</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>FLUPHENAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-11-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fluphenazine hydrochloride tablets are indicated in the management of manifestations of psychotic disorders. Fluphenazine hydrochloride has not been shown effective in the management of behavioral complications in patients with mental retardation.</IndicationAndUsage>
<Description>Fluphenazine hydrochloride is a trifluoromethyl phenothiazine derivative intended for the management of schizophrenia. The chemical designation is 4-[3-[2-(Trifluoromethyl) phenothiazin-10-yl] propyl]-1- piperazineethanol Dihydrochloride. The structural formula is represented below. Fluphenazine Hydrochloride Tablets, USP, for oral administration, contain 1 mg, 2.5 mg, 5 mg, or 10 mg fluphenazine hydrochloride, USP per tablet. Each tablet also contains FD&C Ye low #6 (1 mg tablet), FD&C Red #40 (1 mg tablet), lactose monohydrate, magnesium stearate, polysorbate 80, dibasic calcium phosphate dihydrate, pregelatinized starch, purified water, microcrystalline cellulose, croscarmellose sodium.</Description>
</NDC>
<NDC>
<NDCCode>10695-114-06</NDCCode>
<PackageDescription>.725 kg in 1 CONTAINER (10695-114-06) </PackageDescription>
<NDC11Code>10695-0114-06</NDC11Code>
<ProductNDC>10695-114</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Naltrexone Hcl</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20250227</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT FOR HUMAN PRESCRIPTION COMPOUNDING</MarketingCategoryName>
<LabelerName>Willow Birch Pharma, Inc.</LabelerName>
<SubstanceName>NALTREXONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-03-04</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>27-FEB-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>11527-725-07</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11527-725-07) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>11527-0725-07</NDC11Code>
<ProductNDC>11527-725</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sheffield Advanced Scar Gel</ProprietaryName>
<NonProprietaryName>Advanced Scar Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20211014</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Sheffield Pharmaceuticals LLC</LabelerName>
<SubstanceName>ALLANTOIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2023-12-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211014</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily protects and helps chapped or cracked skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11559-725-01</NDCCode>
<PackageDescription>1 CYLINDER in 1 CARTON (11559-725-01) > 3.8 g in 1 CYLINDER</PackageDescription>
<NDC11Code>11559-0725-01</NDC11Code>
<ProductNDC>11559-725</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lip Conditioner Spf 15</ProprietaryName>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19980101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>ESTEE LAUDER INC</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>3.5</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>11673-725-27</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (11673-725-27) / 20 g in 1 TUBE</PackageDescription>
<NDC11Code>11673-0725-27</NDC11Code>
<ProductNDC>11673-725</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Target Advanced Scar Gel</ProprietaryName>
<NonProprietaryName>Advanced Scar Gel</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200815</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M016</ApplicationNumber>
<LabelerName>Target Corporation</LabelerName>
<SubstanceName>ALLANTOIN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-04-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200815</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporarily protects and helps chapped or cracked skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>12546-725-24</NDCCode>
<PackageDescription>1 KIT in 1 KIT (12546-725-24) * 80 LOZENGE in 1 BAG (12546-109-80) * 80 LOZENGE in 1 BAG (12546-116-80) * 80 LOZENGE in 1 BAG (12546-110-80) </PackageDescription>
<NDC11Code>12546-0725-24</NDC11Code>
<ProductNDC>12546-725</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Halls</ProprietaryName>
<ProprietaryNameSuffix>Variety Pack Mentholyptus Honey Lemon Cherry</ProprietaryNameSuffix>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260720</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>Mondelez Global LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-07-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260720</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves: 1 cough due to cold, 2 occasional minor irritation or sore throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13537-725-01</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE (13537-725-01)</PackageDescription>
<NDC11Code>13537-0725-01</NDC11Code>
<ProductNDC>13537-725</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Bravio Christian Meier Antiperspirant Roll-on Deodorant Fm</ProprietaryName>
<NonProprietaryName>Aluminum Sesquichlorohydrate</NonProprietaryName>
<DosageFormName>EMULSION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151222</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part350</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>ALUMINUM SESQUICHLOROHYDRATE</SubstanceName>
<StrengthNumber>.136</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Reduces underarm perspiration.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16571-725-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (16571-725-01) </PackageDescription>
<NDC11Code>16571-0725-01</NDC11Code>
<ProductNDC>16571-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213126</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>375</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16571-725-50</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (16571-725-50) </PackageDescription>
<NDC11Code>16571-0725-50</NDC11Code>
<ProductNDC>16571-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorzoxazone</ProprietaryName>
<NonProprietaryName>Chlorzoxazone</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220405</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA213126</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>CHLORZOXAZONE</SubstanceName>
<StrengthNumber>375</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Centrally-mediated Muscle Relaxation [PE], Muscle Relaxant [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Chlorzoxazone is indicated as an adjunct to rest, physical therapy, and other measures for the relief of discomfort associated with acute, painful musculoskeletal conditions. The mode of action of this drug has not been clearly identified, but may be related to its sedative properties. Chlorzoxazone does not directly relax tense skeletal muscles in man.</IndicationAndUsage>
<Description>For Painful Musculoskeletal ConditionsPRESCRIBING INFORMATIONDESCRIPTION Each 375 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 375 mg. Each 500 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 500 mg. Each 750 mg Chlorzoxazone tablet contains: Chlorzoxazone USP 750 mg.Chemical Name: 5-Chloro-2-benzoxazolinone.Structural Formula. Molecular Formula: C7H4CINO2 Molecular Weight: 169.56 Chlorzoxazone USP is a white or practically white, practically odorless, crystalline powder. Chlorzoxazone is slightly soluble in water; sparingly soluble in alcohol, in isopropyl alcohol, and in methanol; soluble in solutions of alkali hydroxides and ammonia. Inactive ingredients: anhydrous lactose, croscarmellose sodium, docusate sodium with sodium benzoate, magnesium stearate, microcrystalline cellulose and pregelatinized maize starch. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16714-725-01</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (16714-725-01) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>16714-0725-01</NDC11Code>
<ProductNDC>16714-725</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irinotecan Hydrochloride</ProprietaryName>
<NonProprietaryName>Irinotecan Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170615</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077219</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-07-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>