{
"NDC": [
{
"NDCCode": "63304-968-10",
"PackageDescription": "1000 TABLET, DELAYED RELEASE in 1 BOTTLE (63304-968-10)",
"NDC11Code": "63304-0968-10",
"ProductNDC": "63304-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200794",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets, USP are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3."
},
{
"NDCCode": "63304-968-77",
"PackageDescription": "100 TABLET, DELAYED RELEASE in 1 CARTON (63304-968-77)",
"NDC11Code": "63304-0968-77",
"ProductNDC": "63304-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200794",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets, USP are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3."
},
{
"NDCCode": "63304-968-90",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (63304-968-90)",
"NDC11Code": "63304-0968-90",
"ProductNDC": "63304-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pantoprazole Sodium",
"NonProprietaryName": "Pantoprazole Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120502",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA200794",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "PANTOPRAZOLE SODIUM",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Pantoprazole sodium delayed-release tablets, USP are indicated for.",
"Description": "The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3."
},
{
"NDCCode": "23155-968-78",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (23155-968-78) / 10 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "23155-0968-78",
"ProductNDC": "23155-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20260810",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210729",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2026-08-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260810",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride Capsules are indicated for the treatment of C. difficile-associated diarrhea. Vancomycin Hydrochloride Capsules are also used for the treatment of enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) in adult and pediatric patients less than 18 years of age. Limitations of Use: 1 Parenteral administration of vancomycin is not effective for the above infections; therefore, Vancomycin Hydrochloride Capsules must be given orally for these infections., 2 Orally administered vancomycin hydrochloride capsules is not effective for other types of infections.",
"Description": "Vancomycin Hydrochloride Capsules USP for oral administration contain chromatographically purified vancomycin hydrochloride, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis), which has the chemical formula C66H75Cl2N9O24HCl. The molecular weight of vancomycin hydrochloride is 1485.73; 500 mg of the base is equivalent to 0.34 mmol. The capsules contain 125 mg vancomycin (equivalent to 128 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, FD&C Yellow No. 5, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate and gelatin. The capsules contain 250 mg vancomycin (equivalent to 256 mg vancomycin hydrochloride).These capsules also contain polyethylene glycol 6000, yellow iron oxide, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate, gelatin. Both 125 mg and 250 mg capsules are imprinted with ink which may contain titanium dioxide, carnauba wax, white shellac, glyceryl monooleate. Vancomycin hydrochloride has the structural formula."
},
{
"NDCCode": "51407-968-10",
"PackageDescription": "1000 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51407-968-10) ",
"NDC11Code": "51407-0968-10",
"ProductNDC": "51407-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium",
"ProprietaryNameSuffix": "Delayed Release",
"NonProprietaryName": "Diclofenac Sodium",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "19981113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075185",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "DICLOFENAC SODIUM",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251204",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals ( see WARNINGS; Gastrointestinal Bleeding, Ulceration, and Perforation). Diclofenac is indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.",
"Description": "Diclofenac sodium delayed-release tablets is a benzene-acetic acid derivative. Diclofenac sodium is a white or slightly yellowish crystalline powder and is sparingly soluble in water at 25°C. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula. The inactive ingredients in diclofenac sodium delayed-release tablets include: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, sodium starch glycolate, talc, titanium dioxide, triethyl citrate and ink fine black."
},
{
"NDCCode": "54458-968-10",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (54458-968-10)",
"NDC11Code": "54458-0968-10",
"ProductNDC": "54458-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glimepiride",
"NonProprietaryName": "Glimepiride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090206",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077091",
"LabelerName": "International Laboratories, LLC",
"SubstanceName": "GLIMEPIRIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Sulfonylurea [EPC],Sulfonylurea Compounds [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-02-28",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "54575-968-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-968-10)",
"NDC11Code": "54575-0968-10",
"ProductNDC": "54575-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Upland Sumac Pollen",
"NonProprietaryName": "Rhus Glabra Pollen",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "RHUS GLABRA POLLEN",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "60429-968-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE, PLASTIC (60429-968-10) ",
"NDC11Code": "60429-0968-10",
"ProductNDC": "60429-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxepin Hydrochloride",
"NonProprietaryName": "Doxepin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19860513",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070791",
"LabelerName": "Golden State Medical Supply, Inc.",
"SubstanceName": "DOXEPIN HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tricyclic Antidepressant [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20180205",
"SamplePackage": "N",
"IndicationAndUsage": "Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.",
"Description": "Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b, e]oxepin-11 (6 H)ylidene- N, N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg, 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow No. 6 and the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green No. 3. The imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze."
},
{
"NDCCode": "62504-968-10",
"PackageDescription": "35260 L in 1 DEWAR (62504-968-10) ",
"NDC11Code": "62504-0968-10",
"ProductNDC": "62504-968",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19960101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206023",
"LabelerName": "Cryogenic Medical Gases, LLC",
"SubstanceName": "OXYGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "19960101",
"SamplePackage": "N"
},
{
"NDCCode": "75990-968-10",
"PackageDescription": "1000 mL in 1 CARTRIDGE (75990-968-10) ",
"NDC11Code": "75990-0968-10",
"ProductNDC": "75990-968",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Recens Foam",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110519",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Certus Medical, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2019-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110519",
"SamplePackage": "N"
},
{
"NDCCode": "79903-968-20",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (79903-968-20) / 10 TABLET, CHEWABLE in 1 BLISTER PACK",
"NDC11Code": "79903-0968-20",
"ProductNDC": "79903-968",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Walmart",
"ProprietaryNameSuffix": "Dye Free Chidrens Allergy Chews Bubblegum",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20260130",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "WALMART STORES INC",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260130",
"SamplePackage": "N",
"IndicationAndUsage": "▪ temporarily relieves these symptoms due to hay fever or other upper respiratory allergies.▪runny nose▪itchy, watery eyes▪sneezing▪itching of the nose or throat."
},
{
"NDCCode": "63304-076-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-10) ",
"NDC11Code": "63304-0076-10",
"ProductNDC": "63304-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride Extended-release",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076368",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191120",
"SamplePackage": "N",
"IndicationAndUsage": "BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.",
"Description": "The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose."
},
{
"NDCCode": "63304-083-10",
"PackageDescription": "1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-083-10) ",
"NDC11Code": "63304-0083-10",
"ProductNDC": "63304-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine",
"DosageFormName": "TABLET, SUGAR COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214256",
"LabelerName": "Sun Pharmaceutical Industries Inc",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201118",
"SamplePackage": "N",
"IndicationAndUsage": "For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.",
"Description": "Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "63304-095-11",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (63304-095-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-095-31) ",
"NDC11Code": "63304-0095-11",
"ProductNDC": "63304-095",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erlotinib",
"NonProprietaryName": "Erlotinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210300",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ERLOTINIB",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191105",
"SamplePackage": "N",
"IndicationAndUsage": "Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).",
"Description": "Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "63304-096-11",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (63304-096-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-096-31) ",
"NDC11Code": "63304-0096-11",
"ProductNDC": "63304-096",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erlotinib",
"NonProprietaryName": "Erlotinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210300",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ERLOTINIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191105",
"SamplePackage": "N",
"IndicationAndUsage": "Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).",
"Description": "Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "63304-114-10",
"PackageDescription": "1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-114-10) ",
"NDC11Code": "63304-0114-10",
"ProductNDC": "63304-114",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine",
"DosageFormName": "TABLET, SUGAR COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214256",
"LabelerName": "Sun Pharmaceutical Industries Inc",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201118",
"SamplePackage": "N",
"IndicationAndUsage": "For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.",
"Description": "Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "63304-122-10",
"PackageDescription": "1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-122-10) ",
"NDC11Code": "63304-0122-10",
"ProductNDC": "63304-122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine",
"DosageFormName": "TABLET, SUGAR COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214256",
"LabelerName": "Sun Pharmaceutical Industries Inc",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201118",
"SamplePackage": "N",
"IndicationAndUsage": "For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.",
"Description": "Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "63304-128-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-128-10)",
"NDC11Code": "63304-0128-10",
"ProductNDC": "63304-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-128-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (63304-128-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63304-0128-31",
"ProductNDC": "63304-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-128-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63304-128-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63304-0128-77",
"ProductNDC": "63304-128",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-129-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-129-10)",
"NDC11Code": "63304-0129-10",
"ProductNDC": "63304-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-129-31",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (63304-129-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63304-0129-31",
"ProductNDC": "63304-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-129-77",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63304-129-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63304-0129-77",
"ProductNDC": "63304-129",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20101129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA076786",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2."
},
{
"NDCCode": "63304-130-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-130-10) ",
"NDC11Code": "63304-0130-10",
"ProductNDC": "63304-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065356",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2018-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180806",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form."
},
{
"NDCCode": "63304-131-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-131-10) ",
"NDC11Code": "63304-0131-10",
"ProductNDC": "63304-131",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065356",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2018-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180806",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form."
},
{
"NDCCode": "63304-132-10",
"PackageDescription": "1000 TABLET, FILM COATED in 1 BOTTLE (63304-132-10) ",
"NDC11Code": "63304-0132-10",
"ProductNDC": "63304-132",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxycycline",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065356",
"LabelerName": "Sun Pharmaceutical Industries Inc.",
"SubstanceName": "DOXYCYCLINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2018-08-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180806",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.",
"Description": "Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form."
},
{
"NDCCode": "63304-135-11",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (63304-135-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-135-31) ",
"NDC11Code": "63304-0135-11",
"ProductNDC": "63304-135",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Erlotinib",
"NonProprietaryName": "Erlotinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20191105",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210300",
"LabelerName": "Sun Pharmaceutical Industries, Inc.",
"SubstanceName": "ERLOTINIB",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2019-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191105",
"SamplePackage": "N",
"IndicationAndUsage": "Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).",
"Description": "Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide."
},
{
"NDCCode": "63304-143-10",
"PackageDescription": "1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-143-10) ",
"NDC11Code": "63304-0143-10",
"ProductNDC": "63304-143",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chlorpromazine Hydrochloride",
"NonProprietaryName": "Chlorpromazine",
"DosageFormName": "TABLET, SUGAR COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20201118",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214256",
"LabelerName": "Sun Pharmaceutical Industries Inc",
"SubstanceName": "CHLORPROMAZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Phenothiazine [EPC], Phenothiazines [CS]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20201118",
"SamplePackage": "N",
"IndicationAndUsage": "For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.",
"Description": "Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "63304-154-10",
"PackageDescription": "1000 TABLET, COATED in 1 BOTTLE (63304-154-10)",
"NDC11Code": "63304-0154-10",
"ProductNDC": "63304-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benazepril Hydrochloride And Hydrochlorothiazide",
"NonProprietaryName": "Benazepril Hydrochloride And Hydrochlorothiazide",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20060410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077483",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "BENAZEPRIL HYDROCHLORIDE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "5; 6.25",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Benazepril hydrochloride and hydrochlorothiazide tablets are indicated for the treatment of hypertension. This fixed combination drug is not indicated for the initial therapy of hypertension (see DOSAGE AND ADMINISTRATION).",
"Description": "Benazepril hydrochloride is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride's chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide's chemical name is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide; its structural formula is. Its molecular formula is C7H8ClN3O4S2, and its molecular weight is 297.73. Hydrochlorothiazide is a thiazide diuretic. Benazepril hydrochloride and hydrochlorothiazide tablets are a combination of benazepril hydrochloride and hydrochlorothiazide USP. The tablets are formulated for oral administration with a combination of 5, 10, or 20 mg of benazepril hydrochloride and 6.25, 12.5, or 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are crospovidone, hydrogenated castor oil, hypromellose, iron oxide (black), iron oxide (red), lactose monohydrate, magnesium stearate, polyethylene glycol, talc, and titanium dioxide."
},
{
"NDCCode": "63304-155-10",
"PackageDescription": "1000 TABLET, COATED in 1 BOTTLE (63304-155-10)",
"NDC11Code": "63304-0155-10",
"ProductNDC": "63304-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benazepril Hydrochloride And Hydrochlorothiazide",
"NonProprietaryName": "Benazepril Hydrochloride And Hydrochlorothiazide",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20060410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077483",
"LabelerName": "Ranbaxy Pharmaceuticals Inc.",
"SubstanceName": "BENAZEPRIL HYDROCHLORIDE; HYDROCHLOROTHIAZIDE",
"StrengthNumber": "10; 12.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Benazepril hydrochloride and hydrochlorothiazide tablets are indicated for the treatment of hypertension. This fixed combination drug is not indicated for the initial therapy of hypertension (see DOSAGE AND ADMINISTRATION).",
"Description": "Benazepril hydrochloride is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride's chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide's chemical name is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide; its structural formula is. Its molecular formula is C7H8ClN3O4S2, and its molecular weight is 297.73. Hydrochlorothiazide is a thiazide diuretic. Benazepril hydrochloride and hydrochlorothiazide tablets are a combination of benazepril hydrochloride and hydrochlorothiazide USP. The tablets are formulated for oral administration with a combination of 5, 10, or 20 mg of benazepril hydrochloride and 6.25, 12.5, or 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are crospovidone, hydrogenated castor oil, hypromellose, iron oxide (black), iron oxide (red), lactose monohydrate, magnesium stearate, polyethylene glycol, talc, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63304-968-10</NDCCode>
<PackageDescription>1000 TABLET, DELAYED RELEASE in 1 BOTTLE (63304-968-10)</PackageDescription>
<NDC11Code>63304-0968-10</NDC11Code>
<ProductNDC>63304-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200794</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets, USP are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>63304-968-77</NDCCode>
<PackageDescription>100 TABLET, DELAYED RELEASE in 1 CARTON (63304-968-77)</PackageDescription>
<NDC11Code>63304-0968-77</NDC11Code>
<ProductNDC>63304-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200794</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets, USP are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>63304-968-90</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (63304-968-90)</PackageDescription>
<NDC11Code>63304-0968-90</NDC11Code>
<ProductNDC>63304-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pantoprazole Sodium</ProprietaryName>
<NonProprietaryName>Pantoprazole Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120502</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA200794</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>PANTOPRAZOLE SODIUM</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Proton Pump Inhibitor [EPC],Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Pantoprazole sodium delayed-release tablets, USP are indicated for.</IndicationAndUsage>
<Description>The active ingredient in pantoprazole sodium delayed-release tablets, USP is a substituted benzimidazole, sodium 5-(difluoromethoxy)-2-[[(3,4-dimethoxy-2-pyridinyl)methyl] sulfinyl]-1H-benzimidazole sesquihydrate, a compound that inhibits gastric acid secretion. Its molecular formula is C16H14F2N3NaO4S x 1.5 H2O, with a molecular weight of 432.4. The structural formula is:. Pantoprazole sodium, USP sesquihydrate is a white to off-white powder. Pantoprazole has weakly basic and acidic properties. Pantoprazole sodium, USP sesquihydrate is freely soluble in water and in dehydrated alcohol, very soluble in methanol, practically insoluble in hexane and dichloromethane. The stability of the compound in aqueous solution is pH-dependent. The rate of degradation increases with decreasing pH. At ambient temperature, the degradation half-life is approximately 2.8 hours at pH 5 and approximately 220 hours at pH 7.8. Pantoprazole sodium, USP is supplied as a delayed-release tablet, available in two strengths (20 mg and 40 mg). Each pantoprazole sodium delayed-release tablet, USP contains 45.1 mg or 22.56 mg of pantoprazole sodium sesquihydrate (equivalent to 40 mg or 20 mg pantoprazole, respectively) with the following inactive ingredients: calcium stearate, crospovidone, ferric oxide black, ferric oxide yellow, hydroxypropyl cellulose, hypromellose, mannitol, methacrylic acid copolymer, microcrystalline cellulose, povidone, propylene glycol, shellac, sodium carbonate, sodium lauryl sulfate, talc, titanium dioxide, and triethyl citrate. Pantoprazole sodium delayed-release tablets, USP (40 mg and 20 mg) complies with USP dissolution test 3.</Description>
</NDC>
<NDC>
<NDCCode>23155-968-78</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (23155-968-78) / 10 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>23155-0968-78</NDC11Code>
<ProductNDC>23155-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260810</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210729</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride Capsules are indicated for the treatment of C. difficile-associated diarrhea. Vancomycin Hydrochloride Capsules are also used for the treatment of enterocolitis caused by Staphylococcus aureus (including methicillin-resistant strains) in adult and pediatric patients less than 18 years of age. Limitations of Use: 1 Parenteral administration of vancomycin is not effective for the above infections; therefore, Vancomycin Hydrochloride Capsules must be given orally for these infections., 2 Orally administered vancomycin hydrochloride capsules is not effective for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride Capsules USP for oral administration contain chromatographically purified vancomycin hydrochloride, a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis), which has the chemical formula C66H75Cl2N9O24HCl. The molecular weight of vancomycin hydrochloride is 1485.73; 500 mg of the base is equivalent to 0.34 mmol. The capsules contain 125 mg vancomycin (equivalent to 128 mg vancomycin hydrochloride). These capsules also contain polyethylene glycol 6000, FD&C Yellow No. 5, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate and gelatin. The capsules contain 250 mg vancomycin (equivalent to 256 mg vancomycin hydrochloride).These capsules also contain polyethylene glycol 6000, yellow iron oxide, titanium dioxide, FD&C Blue No. 1, sodium lauryl sulfate, gelatin. Both 125 mg and 250 mg capsules are imprinted with ink which may contain titanium dioxide, carnauba wax, white shellac, glyceryl monooleate. Vancomycin hydrochloride has the structural formula.</Description>
</NDC>
<NDC>
<NDCCode>51407-968-10</NDCCode>
<PackageDescription>1000 TABLET, DELAYED RELEASE in 1 BOTTLE, PLASTIC (51407-968-10) </PackageDescription>
<NDC11Code>51407-0968-10</NDC11Code>
<ProductNDC>51407-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium</ProprietaryName>
<ProprietaryNameSuffix>Delayed Release</ProprietaryNameSuffix>
<NonProprietaryName>Diclofenac Sodium</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19981113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075185</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>DICLOFENAC SODIUM</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251204</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of diclofenac sodium delayed-release tablets and other treatment options before deciding to use diclofenac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals ( see WARNINGS; Gastrointestinal Bleeding, Ulceration, and Perforation). Diclofenac is indicated: 1 For relief of the signs and symptoms of osteoarthritis, 2 For relief of the signs and symptoms of rheumatoid arthritis, 3 For acute or long-term use in the relief of signs and symptoms of ankylosing spondylitis.</IndicationAndUsage>
<Description>Diclofenac sodium delayed-release tablets is a benzene-acetic acid derivative. Diclofenac sodium is a white or slightly yellowish crystalline powder and is sparingly soluble in water at 25°C. The chemical name is 2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monosodium salt. The molecular weight is 318.14. Its molecular formula is C 14H 10Cl 2NNaO 2, and it has the following structural formula. The inactive ingredients in diclofenac sodium delayed-release tablets include: hydroxypropyl methylcellulose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, microcrystalline cellulose, polyethylene glycol, povidone, propylene glycol, sodium starch glycolate, talc, titanium dioxide, triethyl citrate and ink fine black.</Description>
</NDC>
<NDC>
<NDCCode>54458-968-10</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (54458-968-10)</PackageDescription>
<NDC11Code>54458-0968-10</NDC11Code>
<ProductNDC>54458-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glimepiride</ProprietaryName>
<NonProprietaryName>Glimepiride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090206</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077091</ApplicationNumber>
<LabelerName>International Laboratories, LLC</LabelerName>
<SubstanceName>GLIMEPIRIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Sulfonylurea [EPC],Sulfonylurea Compounds [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-02-28</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>54575-968-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-968-10)</PackageDescription>
<NDC11Code>54575-0968-10</NDC11Code>
<ProductNDC>54575-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Upland Sumac Pollen</ProprietaryName>
<NonProprietaryName>Rhus Glabra Pollen</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>RHUS GLABRA POLLEN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>60429-968-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE, PLASTIC (60429-968-10) </PackageDescription>
<NDC11Code>60429-0968-10</NDC11Code>
<ProductNDC>60429-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
<NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19860513</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070791</ApplicationNumber>
<LabelerName>Golden State Medical Supply, Inc.</LabelerName>
<SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180205</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
<Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b, e]oxepin-11 (6 H)ylidene- N, N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The empty gelatin capsule shells contain D&C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg, 25 mg and 50 mg empty gelatin capsule shells contain FD&C Yellow No. 6 and the 75 mg and 100 mg empty gelatin capsule shells contain FD&C Green No. 3. The imprinting ink contains black iron oxide, D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1 Aluminum Lake, FD&C Blue No. 2 Aluminum Lake, FD&C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
</NDC>
<NDC>
<NDCCode>62504-968-10</NDCCode>
<PackageDescription>35260 L in 1 DEWAR (62504-968-10) </PackageDescription>
<NDC11Code>62504-0968-10</NDC11Code>
<ProductNDC>62504-968</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19960101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206023</ApplicationNumber>
<LabelerName>Cryogenic Medical Gases, LLC</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19960101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>75990-968-10</NDCCode>
<PackageDescription>1000 mL in 1 CARTRIDGE (75990-968-10) </PackageDescription>
<NDC11Code>75990-0968-10</NDC11Code>
<ProductNDC>75990-968</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Recens Foam</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110519</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Certus Medical, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110519</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>79903-968-20</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (79903-968-20) / 10 TABLET, CHEWABLE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>79903-0968-20</NDC11Code>
<ProductNDC>79903-968</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Walmart</ProprietaryName>
<ProprietaryNameSuffix>Dye Free Chidrens Allergy Chews Bubblegum</ProprietaryNameSuffix>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260130</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>WALMART STORES INC</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>▪ temporarily relieves these symptoms due to hay fever or other upper respiratory allergies.▪runny nose▪itchy, watery eyes▪sneezing▪itching of the nose or throat.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63304-076-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (63304-076-10) </PackageDescription>
<NDC11Code>63304-0076-10</NDC11Code>
<ProductNDC>63304-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride Extended-release</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076368</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BECAUSE OF REPORTS OF INTESTINAL AND GASTRIC ULCERATION AND BLEEDING WITH CONTROLLED RELEASE POTASSIUM CHLORIDE PREPARATIONS, THESE DRUGS SHOULD BE RESERVED FOR THOSE PATIENTS WHO CANNOT TOLERATE OR REFUSE TO TAKE LIQUID OR EFFERVESCENT POTASSIUM PREPARATIONS OR FOR PATIENTS IN WHOM THERE IS A PROBLEM OF COMPLIANCE WITH THESE PREPARATIONS. : 1 For the treatment of patients with hypokalemia with or without metabolic alkalosis, in digitalis intoxication, and in patients with hypokalemic familial periodic paralysis. If hypokalemia is the result of diuretic therapy, consideration should be given to the use of a lower dose of diuretic, which may be sufficient without leading to hypokalemia., 2 For the prevention of hypokalemia in patients who would be at particular risk if hypokalemia were to develop, e.g. digitalized patients or patients with significant cardiac arrhythmias.</IndicationAndUsage>
<Description>The Potassium Chloride Extended Release Tablets, USP, 10 mEq product is an immediately dispersing extended release oral dosage form of potassium chloride containing 750 mg of microencapsulated potassium chloride, USP equivalent to 10 mEq of potassium in a tablet. These formulations are intended to slow the release of potassium so that the likelihood of a high localized concentration of potassium chloride within the gastrointestinal tract is reduced. Potassium Chloride Extended Release Tablets, USP, 10mEq are an electrolyte replenisher. The chemical name of the active ingredient is potassium chloride, and the structural formula is KCl. Potassium chloride, USP occurs as a white, granular powder or as colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and insoluble in alcohol. Potassium Chloride Extended Release Tablets, USP, 10mEq are a tablet formulation (not enteric coated or wax matrix) containing individually microencapsulated potassium chloride crystals which disperse upon tablet disintegration. In simulated gastric fluid at 37°C and in the absence of outside agitation, Potassium Chloride Extended Release Tablets, USP, 10 mEq begin disintegrating into micro-encapsulated crystals within seconds and completely disintegrates within 1 minute. The microencapsulated crystals are formulated to provide an extended release of potassium chloride. FDA approved dissolution test specifications differ from USP. Inactive Ingredients:Colloidal silicon dioxide, crospovidone, diethyl phthalate, ethylcellulose, microcrystalline cellulose.</Description>
</NDC>
<NDC>
<NDCCode>63304-083-10</NDCCode>
<PackageDescription>1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-083-10) </PackageDescription>
<NDC11Code>63304-0083-10</NDC11Code>
<ProductNDC>63304-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine</NonProprietaryName>
<DosageFormName>TABLET, SUGAR COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214256</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>63304-095-11</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (63304-095-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-095-31) </PackageDescription>
<NDC11Code>63304-0095-11</NDC11Code>
<ProductNDC>63304-095</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erlotinib</ProprietaryName>
<NonProprietaryName>Erlotinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210300</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ERLOTINIB</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).</IndicationAndUsage>
<Description>Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-096-11</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (63304-096-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-096-31) </PackageDescription>
<NDC11Code>63304-0096-11</NDC11Code>
<ProductNDC>63304-096</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erlotinib</ProprietaryName>
<NonProprietaryName>Erlotinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210300</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ERLOTINIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).</IndicationAndUsage>
<Description>Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-114-10</NDCCode>
<PackageDescription>1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-114-10) </PackageDescription>
<NDC11Code>63304-0114-10</NDC11Code>
<ProductNDC>63304-114</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine</NonProprietaryName>
<DosageFormName>TABLET, SUGAR COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214256</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>63304-122-10</NDCCode>
<PackageDescription>1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-122-10) </PackageDescription>
<NDC11Code>63304-0122-10</NDC11Code>
<ProductNDC>63304-122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine</NonProprietaryName>
<DosageFormName>TABLET, SUGAR COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214256</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>63304-128-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-128-10)</PackageDescription>
<NDC11Code>63304-0128-10</NDC11Code>
<ProductNDC>63304-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-128-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (63304-128-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63304-0128-31</NDC11Code>
<ProductNDC>63304-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-128-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63304-128-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63304-0128-77</NDC11Code>
<ProductNDC>63304-128</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-129-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-129-10)</PackageDescription>
<NDC11Code>63304-0129-10</NDC11Code>
<ProductNDC>63304-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-129-31</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (63304-129-31) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63304-0129-31</NDC11Code>
<ProductNDC>63304-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-129-77</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63304-129-77) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63304-0129-77</NDC11Code>
<ProductNDC>63304-129</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA076786</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Donepezil is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer’s type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer’s disease.</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2, 3-dihydro-5, 6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1 H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has a molecular formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride (monohydrate), USP is a white to off-white crystalline powder and is soluble in chloroform, sparingly soluble in water, methanol and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride (monohydrate), USP. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium starch glycolate. The film coating contains hypromellose, ferric oxide yellow, polyethylene glycol, talc and titanium dioxide. Complies with USP Organic Impurities, Procedure 2.</Description>
</NDC>
<NDC>
<NDCCode>63304-130-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-130-10) </PackageDescription>
<NDC11Code>63304-0130-10</NDC11Code>
<ProductNDC>63304-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065356</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form.</Description>
</NDC>
<NDC>
<NDCCode>63304-131-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-131-10) </PackageDescription>
<NDC11Code>63304-0131-10</NDC11Code>
<ProductNDC>63304-131</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065356</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form.</Description>
</NDC>
<NDC>
<NDCCode>63304-132-10</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED in 1 BOTTLE (63304-132-10) </PackageDescription>
<NDC11Code>63304-0132-10</NDC11Code>
<ProductNDC>63304-132</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxycycline</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065356</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc.</LabelerName>
<SubstanceName>DOXYCYCLINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2018-08-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline tablets are indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline tablets are also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline tablets are indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablets are indicated for treatment of infections caused by the following gram-positive microorganisms when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline tablets are an alternative drug in the treatment of the following infections:. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent’s infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline tablets may be a useful adjunct to amebicides. In severe acne, doxycycline tablets may be useful adjunctive therapy.</IndicationAndUsage>
<Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline 150 mg, 100 mg, 75 mg, and 50 mg tablets contain doxycycline monohydrate, USP equivalent to 150 mg, 100 mg, 75 mg, or 50 mg of doxycycline for oral administration. Inactive ingredients include colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, polysorbate 80, sodium starch glycolate, and titanium dioxide. In addition, doxycycline 50 mg tablets contain: FD&C Blue #1 Aluminum lake and polyethylene glycol, 75 mg tablets contain: D&C Yellow #10 Aluminum lake, FD&C Blue #1 Aluminum lake, FD&C Yellow #6 Aluminum lake and triacetin, 100 mg tablets contain: polyethylene glycol and FD&C Blue #1 Aluminum lake and 150 mg tablets contain: polyethylene glycol. Its molecular weight is 462.46. The chemical designation of the light-yellow crystalline powder is alpha-6-deoxy-5-oxytetracycline. Structural formula. C22H24N2O8H2O. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form.</Description>
</NDC>
<NDC>
<NDCCode>63304-135-11</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (63304-135-11) > 10 TABLET, FILM COATED in 1 BLISTER PACK (63304-135-31) </PackageDescription>
<NDC11Code>63304-0135-11</NDC11Code>
<ProductNDC>63304-135</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Erlotinib</ProprietaryName>
<NonProprietaryName>Erlotinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191105</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210300</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
<SubstanceName>ERLOTINIB</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Erlotinib tablets are kinase inhibitors indicated for: 1 The treatment of patients with metastatic non-small cell lung cancer (NSCLC) whose tumors have epidermal growth factor receptor (EGFR) exon 19 deletions or exon 21 (L858R) substitution mutations as detected by an FDA-approved test receiving first-line, maintenance, or second or greater line treatment after progression following at least one prior chemotherapy regimen. (1.1), 2 First-line treatment of patients with locally advanced, unresectable or metastatic pancreatic cancer, in combination with gemcitabine. (1.2).</IndicationAndUsage>
<Description>Erlotinib, a kinase inhibitor, is a quinazolinamine with the chemical name N-(3-ethynylphenyl)-6,7-bis(2-methoxyethoxy)‑4-quinazolinamine hydrochloride. Erlotinib tablets contain erlotinib as the hydrochloride salt that has the following structural formula. Erlotinib hydrochloride is off-white to pale yellow powder and has the molecular formula C22H24ClN3O4 and a molecular weight of 429.90. The molecule has a pKa of about 4.44 at 25°C. Erlotinib hydrochloride is slightly soluble in methanol; practically insoluble in acetonitrile and in acetone. Erlotinib hydrochloride is insoluble over the pH range of 1.2 to 8.0. Erlotinib tablets for oral administration are available in three dosage strengths containing erlotinib hydrochloride (27.3 mg, 109.3 mg and 163.9 mg) equivalent to 25 mg, 100 mg and 150 mg erlotinib and the following inactive ingredients: hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, sodium starch glycolate, talc and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-143-10</NDCCode>
<PackageDescription>1000 TABLET, SUGAR COATED in 1 BOTTLE (63304-143-10) </PackageDescription>
<NDC11Code>63304-0143-10</NDC11Code>
<ProductNDC>63304-143</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chlorpromazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Chlorpromazine</NonProprietaryName>
<DosageFormName>TABLET, SUGAR COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201118</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214256</ApplicationNumber>
<LabelerName>Sun Pharmaceutical Industries Inc</LabelerName>
<SubstanceName>CHLORPROMAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Phenothiazine [EPC], Phenothiazines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201118</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For the management of manifestations of psychotic disorders. For the treatment of schizophrenia. To control nausea and vomiting. For relief of restlessness and apprehension before surgery. For acute intermittent porphyria. As an adjunct in the treatment of tetanus. To control the manifestations of the manic type of manic-depressive illness. For relief of intractable hiccups. For the treatment of severe behavioral problems in children (1 to 12 years of age) marked by combativeness and/or explosive hyperexcitable behavior (out of proportion to immediate provocations), and in the short-term treatment of hyperactive children who show excessive motor activity with accompanying conduct disorders consisting of some or all of the following symptoms: impulsivity, difficulty sustaining attention, aggressivity, mood lability and poor frustration tolerance.</IndicationAndUsage>
<Description>Chlorpromazine hydrochloride, USP, a dimethylamine derivative of phenothiazine, has a chemical formula of 2-chloro-10-[3-(dimethylamino) propyl] phenothiazine monohydrochloride. It is available in tablets for oral administration. It has the following structural formula. C 17H 19ClN 2S. HCl. M.W.355.33 g/mol. Chlorpromazine hydrochloride occurs as white or slightly creamy white, crystalline powder which darkens on prolonged exposure to light. Each tablet for oral administration contains 10 mg, 25 mg, 50 mg, 100 mg, or 200 mg of chlorpromazine hydrochloride, USP. Inactive ingredients: calcium sulfate dihydrate, ferric oxide red, ferric oxide yellow, ferrosoferric oxide, glyceryl monostearate, hypromellose, lactose monohydrate, magnesium stearate, medium chain triglycerides, polyethylene glycol, propylene glycol, shellac glaze, sucrose and talc. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>63304-154-10</NDCCode>
<PackageDescription>1000 TABLET, COATED in 1 BOTTLE (63304-154-10)</PackageDescription>
<NDC11Code>63304-0154-10</NDC11Code>
<ProductNDC>63304-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benazepril Hydrochloride And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Benazepril Hydrochloride And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077483</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BENAZEPRIL HYDROCHLORIDE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>5; 6.25</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Benazepril hydrochloride and hydrochlorothiazide tablets are indicated for the treatment of hypertension. This fixed combination drug is not indicated for the initial therapy of hypertension (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Benazepril hydrochloride is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride's chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide's chemical name is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide; its structural formula is. Its molecular formula is C7H8ClN3O4S2, and its molecular weight is 297.73. Hydrochlorothiazide is a thiazide diuretic. Benazepril hydrochloride and hydrochlorothiazide tablets are a combination of benazepril hydrochloride and hydrochlorothiazide USP. The tablets are formulated for oral administration with a combination of 5, 10, or 20 mg of benazepril hydrochloride and 6.25, 12.5, or 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are crospovidone, hydrogenated castor oil, hypromellose, iron oxide (black), iron oxide (red), lactose monohydrate, magnesium stearate, polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>63304-155-10</NDCCode>
<PackageDescription>1000 TABLET, COATED in 1 BOTTLE (63304-155-10)</PackageDescription>
<NDC11Code>63304-0155-10</NDC11Code>
<ProductNDC>63304-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benazepril Hydrochloride And Hydrochlorothiazide</ProprietaryName>
<NonProprietaryName>Benazepril Hydrochloride And Hydrochlorothiazide</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077483</ApplicationNumber>
<LabelerName>Ranbaxy Pharmaceuticals Inc.</LabelerName>
<SubstanceName>BENAZEPRIL HYDROCHLORIDE; HYDROCHLOROTHIAZIDE</SubstanceName>
<StrengthNumber>10; 12.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin Converting Enzyme Inhibitor [EPC],Angiotensin-converting Enzyme Inhibitors [MoA],Decreased Blood Pressure [PE],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Benazepril hydrochloride and hydrochlorothiazide tablets are indicated for the treatment of hypertension. This fixed combination drug is not indicated for the initial therapy of hypertension (see DOSAGE AND ADMINISTRATION).</IndicationAndUsage>
<Description>Benazepril hydrochloride is a white to off-white crystalline powder, soluble (> 100 mg/mL) in water, in ethanol, and in methanol. Benazepril hydrochloride's chemical name is 3-[[1-(ethoxycarbonyl)-3-phenyl-(1S)-propyl]amino]-2,3,4,5-tetrahydro-2-oxo-1H-1-(3S)-benzazepine-1-acetic acid monohydrochloride; its structural formula is. Its molecular formula is C24H28N2O5HCl, and its molecular weight is 460.96. Benazeprilat, the active metabolite of benazepril, is a nonsulfhydryl angiotensin-converting enzyme inhibitor. Benazepril is converted to benazeprilat by hepatic cleavage of the ester group. Hydrochlorothiazide USP is a white, or practically white, practically odorless, crystalline powder. It is slightly soluble in water; freely soluble in sodium hydroxide solution, in n-butylamine, and in dimethylformamide; sparingly soluble in methanol; and insoluble in ether, in chloroform, and in dilute mineral acids. Hydrochlorothiazide's chemical name is 6-chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide; its structural formula is. Its molecular formula is C7H8ClN3O4S2, and its molecular weight is 297.73. Hydrochlorothiazide is a thiazide diuretic. Benazepril hydrochloride and hydrochlorothiazide tablets are a combination of benazepril hydrochloride and hydrochlorothiazide USP. The tablets are formulated for oral administration with a combination of 5, 10, or 20 mg of benazepril hydrochloride and 6.25, 12.5, or 25 mg of hydrochlorothiazide USP. The inactive ingredients of the tablets are crospovidone, hydrogenated castor oil, hypromellose, iron oxide (black), iron oxide (red), lactose monohydrate, magnesium stearate, polyethylene glycol, talc, and titanium dioxide.</Description>
</NDC>
</NDCList>