RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-173-95</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-173-95)  / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0173-95</NDC11Code>
    <ProductNDC>63323-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.  When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.  In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species, and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown Gentamicin Injection to be effective in bacterial neonatal sepsis; bacterial septicemia; and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns).  Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing.  The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection, and the important additional concepts contained in the WARNINGS  box above.  If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin type drug before obtaining results of susceptibility testing.  If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin.  Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa.  It has also been found effective when used in conjunction with a penicillin-type drug for the treatment of endocarditis caused by group D streptococci. Gentamicin Injection has also been shown to be effective in the treatment of serious staphylococcal infections.  While not the antibiotic of first choice, gentamicin may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use.  It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from Micromonospora  purpurea, an actinomycete. It has the following structural formula. Gentamicin Injection is a sterile, nonpyrogenic, aqueous solution for parenteral administration and is available both with and without preservatives. Each mL of the preservative free product contains: Gentamicin sulfate, equivalent to gentamicin 10 mg; Water for Injection q.s.  Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment (3 to 5.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-173-02</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-173-02)  / 2 mL in 1 VIAL (63323-173-01) </PackageDescription>
    <NDC11Code>63323-0173-02</NDC11Code>
    <ProductNDC>63323-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species, and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown Gentamicin Injection to be effective in bacterial neonatal sepsis; bacterial septicemia; and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection, and the important additional concepts contained in the BOXED WARNINGS above. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for the treatment of endocarditis caused by group D streptococci. Gentamicin Injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from Micromonospora purpurea, an actinomycete. It has the following structural formula:. Gentamicin Injection is a sterile, nonpyrogenic, aqueous solution for parenteral administration and is available both with and without preservatives. Each mL of the preservative free product contains: Gentamicin sulfate, equivalent to gentamicin 10 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment (3 to 5.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-173-94</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-173-94)  / 2 mL in 1 VIAL (63323-173-41) </PackageDescription>
    <NDC11Code>63323-0173-94</NDC11Code>
    <ProductNDC>63323-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-01-09</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species, and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown Gentamicin Injection to be effective in bacterial neonatal sepsis; bacterial septicemia; and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection, and the important additional concepts contained in the BOXED WARNINGS above. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for the treatment of endocarditis caused by group D streptococci. Gentamicin Injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from Micromonospora purpurea, an actinomycete. It has the following structural formula:. Gentamicin Injection is a sterile, nonpyrogenic, aqueous solution for parenteral administration and is available both with and without preservatives. Each mL of the preservative free product contains: Gentamicin sulfate, equivalent to gentamicin 10 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment (3 to 5.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-95</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-95)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-010-42) </PackageDescription>
    <NDC11Code>63323-0010-95</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-229-95</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 BOX (63323-229-95)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0229-95</NDC11Code>
    <ProductNDC>63323-229</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Protamine Sulfate</ProprietaryName>
    <NonProprietaryName>Protamine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001018</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089454</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROTAMINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin Binding Activity [MoA], Heparin Reversal Agent [EPC], Reversed Anticoagulation Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001018</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Protamine Sulfate Injection, USP is indicated in the treatment of heparin overdosage.</IndicationAndUsage>
    <Description>Protamines are simple proteins of low molecular weight that are rich in arginine and strongly basic.  They occur in the sperm of salmon and certain other species of fish. Protamine sulfate occurs as fine white or off-white amorphous or crystalline powder.  It is sparingly soluble in water.  The pH is between 6.0 and 7.0.  The cationic hydrogenated protamine at a pH of 6.8 to 7.1 reacts with anionic heparin at a pH of 5.0 to 7.5 to form an inactive complex. Protamine Sulfate Injection, USP is a sterile, isotonic solution of protamine sulfate.  It acts as a heparin antagonist.  It is also a weak anticoagulant. Each mL contains: Protamine sulfate 10 mg; sodium chloride 9 mg; Water for Injection q.s.  Sulfuric acid and/or dibasic sodium phosphate (heptahydrate) may have been added for pH adjustment. The preparation is preservative free. Protamine sulfate is administered intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-95</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-286-95)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-93) </PackageDescription>
    <NDC11Code>63323-0286-95</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O                     M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-568-95</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (63323-568-95)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0568-95</NDC11Code>
    <ProductNDC>63323-568</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150315</StartMarketingDate>
    <EndMarketingDate>20211031</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20150315</StartMarketingDatePackage>
    <EndMarketingDatePackage>20210930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-569-95</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (63323-569-95)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0569-95</NDC11Code>
    <ProductNDC>63323-569</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150315</StartMarketingDate>
    <EndMarketingDate>20200531</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20150315</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>62135-907-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (62135-907-20) </PackageDescription>
    <NDC11Code>62135-0907-20</NDC11Code>
    <ProductNDC>62135-907</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140725</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA205931</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets and doxycycline hyclate capsules are tetracycline class drugs indicated for: 1 Rickettsial infections ( 1.1) , 2 Sexually transmitted infections ( 1.2) , 3 Respiratory tract infections ( 1.3) , 4 Specific bacterial infections ( 1.4) , 5 Ophthalmic infections ( 1.5) , 6 Anthrax, including inhalational anthrax (post-exposure) ( 1.6) , 7 Alternative treatment for selected infections when penicillin is contraindicated ( 1.7) , 8 Adjunctive therapy for acute intestinal amebiasis and severe acne ( 1.8) , 9 Prophylaxis of malaria ( 1.9) .</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP and Doxycycline Hyclate Capsules, USP contain Doxycycline Hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C 22H 24N 2O 8HCl) 2C 2H 6OH 2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is:. 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline Hyclate Tablets, USP. Doxycycline Hyclate Tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.1 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are croscarmellose sodium, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Film-coating contains: FD&amp;C Blue#2/Indigotine Aluminum Lake, polyvinyl alcohol, polyethylene glycol 8000, talc, titanium dioxide and yellow iron oxide (150 mg Tablet). Doxycycline Hyclate Tablets, USP 75 mg contain 0.95 mg (0.041 mEq) of sodium. Doxycycline Hyclate Tablets, USP 150 mg contain 1.89 mg (0.082 mEq) of sodium. Doxycycline Hyclate Capsules, USP. Doxycycline Hyclate Capsules, USP are available as 75 mg capsules. Each 75 mg capsule contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Inactive ingredients in the capsule formulation are magnesium stearate, microcrystalline cellulose, and a hard gelatin capsule which contains FD&amp;C Blue #1, FD&amp;C Red #3 and titanium dioxide. The capsules are printed with edible ink containing alcohol, black iron oxide, FD&amp;C Blue #1/ Brilliant Blue FCF Aluminum Lake, FD&amp;C Blue #2/Indigo Carmine Aluminum Lake, FD&amp;C Red #40/Allura Red AC Aluminum Lake, D&amp;C Yellow #10 Aluminum Lake, and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-908-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (62135-908-20) </PackageDescription>
    <NDC11Code>62135-0908-20</NDC11Code>
    <ProductNDC>62135-908</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140725</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA205931</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets and doxycycline hyclate capsules are tetracycline class drugs indicated for: 1 Rickettsial infections ( 1.1) , 2 Sexually transmitted infections ( 1.2) , 3 Respiratory tract infections ( 1.3) , 4 Specific bacterial infections ( 1.4) , 5 Ophthalmic infections ( 1.5) , 6 Anthrax, including inhalational anthrax (post-exposure) ( 1.6) , 7 Alternative treatment for selected infections when penicillin is contraindicated ( 1.7) , 8 Adjunctive therapy for acute intestinal amebiasis and severe acne ( 1.8) , 9 Prophylaxis of malaria ( 1.9) .</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP and Doxycycline Hyclate Capsules, USP contain Doxycycline Hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C 22H 24N 2O 8HCl) 2C 2H 6OH 2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is:. 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline Hyclate Tablets, USP. Doxycycline Hyclate Tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.1 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are croscarmellose sodium, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Film-coating contains: FD&amp;C Blue#2/Indigotine Aluminum Lake, polyvinyl alcohol, polyethylene glycol 8000, talc, titanium dioxide and yellow iron oxide (150 mg Tablet). Doxycycline Hyclate Tablets, USP 75 mg contain 0.95 mg (0.041 mEq) of sodium. Doxycycline Hyclate Tablets, USP 150 mg contain 1.89 mg (0.082 mEq) of sodium. Doxycycline Hyclate Capsules, USP. Doxycycline Hyclate Capsules, USP are available as 75 mg capsules. Each 75 mg capsule contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Inactive ingredients in the capsule formulation are magnesium stearate, microcrystalline cellulose, and a hard gelatin capsule which contains FD&amp;C Blue #1, FD&amp;C Red #3 and titanium dioxide. The capsules are printed with edible ink containing alcohol, black iron oxide, FD&amp;C Blue #1/ Brilliant Blue FCF Aluminum Lake, FD&amp;C Blue #2/Indigo Carmine Aluminum Lake, FD&amp;C Red #40/Allura Red AC Aluminum Lake, D&amp;C Yellow #10 Aluminum Lake, and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>62135-975-20</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE (62135-975-20) </PackageDescription>
    <NDC11Code>62135-0975-20</NDC11Code>
    <ProductNDC>62135-975</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20160426</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA208253</ApplicationNumber>
    <LabelerName>Chartwell RX, LLC</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>75</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250326</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxycycline hyclate tablets and doxycycline hyclate capsules are tetracycline class drugs indicated for: 1 Rickettsial infections ( 1.1) , 2 Sexually transmitted infections ( 1.2) , 3 Respiratory tract infections ( 1.3) , 4 Specific bacterial infections ( 1.4) , 5 Ophthalmic infections ( 1.5) , 6 Anthrax, including inhalational anthrax (post-exposure) ( 1.6) , 7 Alternative treatment for selected infections when penicillin is contraindicated ( 1.7) , 8 Adjunctive therapy for acute intestinal amebiasis and severe acne ( 1.8) , 9 Prophylaxis of malaria ( 1.9) .</IndicationAndUsage>
    <Description>Doxycycline Hyclate Tablets, USP and Doxycycline Hyclate Capsules, USP contain Doxycycline Hyclate, USP a tetracycline class drug synthetically derived from oxytetracycline, in an immediate release formulation for oral administration. The molecular formula of doxycycline hyclate is (C 22H 24N 2O 8HCl) 2C 2H 6OH 2O and the molecular weight of doxycycline hyclate is 1025.87. The chemical name for doxycycline hyclate is:. 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. The structural formula for doxycycline hyclate is. Figure 1: Structure of Doxycycline Hyclate. Doxycycline hyclate is a yellow crystalline powder soluble in water and in solutions of alkali hydroxides and carbonates. Doxycycline Hyclate Tablets, USP. Doxycycline Hyclate Tablets, USP are available as 75 mg and 150 mg tablets. Each 75 mg tablet contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Each 150 mg tablet contains 173.1 mg of doxycycline hyclate equivalent to 150 mg of doxycycline. Inactive ingredients in the tablet formulation are croscarmellose sodium, magnesium stearate, microcrystalline cellulose and sodium lauryl sulfate. Film-coating contains: FD&amp;C Blue#2/Indigotine Aluminum Lake, polyvinyl alcohol, polyethylene glycol 8000, talc, titanium dioxide and yellow iron oxide (150 mg Tablet). Doxycycline Hyclate Tablets, USP 75 mg contain 0.95 mg (0.041 mEq) of sodium. Doxycycline Hyclate Tablets, USP 150 mg contain 1.89 mg (0.082 mEq) of sodium. Doxycycline Hyclate Capsules, USP. Doxycycline Hyclate Capsules, USP are available as 75 mg capsules. Each 75 mg capsule contains 86.6 mg of doxycycline hyclate equivalent to 75 mg of doxycycline. Inactive ingredients in the capsule formulation are magnesium stearate, microcrystalline cellulose, and a hard gelatin capsule which contains FD&amp;C Blue #1, FD&amp;C Red #3 and titanium dioxide. The capsules are printed with edible ink containing alcohol, black iron oxide, FD&amp;C Blue #1/ Brilliant Blue FCF Aluminum Lake, FD&amp;C Blue #2/Indigo Carmine Aluminum Lake, FD&amp;C Red #40/Allura Red AC Aluminum Lake, D&amp;C Yellow #10 Aluminum Lake, and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-597-10</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-597-10)  / 5.3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0597-10</NDC11Code>
    <ProductNDC>63323-597</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferoxamine</ProprietaryName>
    <NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20091215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078718</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
    <StrengthNumber>95</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferoxamine Mesylate for Injection is an iron-chelating agent indicated: : 1 As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) , 2 For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) .</IndicationAndUsage>
    <Description>Deferoxamine Mesylate for Injection, USP is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine Mesylate for Injection, USP is supplied as vials containing 500 mg and 2 g of deferoxamine mesylate USP (corresponding to 426.82 mg and 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N- [5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N- hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesul-fonate (salt), and its structural formula is:. Deferoxamine mesylate is a white to almost white powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-599-30</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-599-30)  / 21.1 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0599-30</NDC11Code>
    <ProductNDC>63323-599</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferoxamine</ProprietaryName>
    <NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20091215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078718</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
    <StrengthNumber>95</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferoxamine Mesylate for Injection is an iron-chelating agent indicated: : 1 As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) , 2 For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) .</IndicationAndUsage>
    <Description>Deferoxamine Mesylate for Injection, USP is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine Mesylate for Injection, USP is supplied as vials containing 500 mg and 2 g of deferoxamine mesylate USP (corresponding to 426.82 mg and 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N- [5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N- hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesul-fonate (salt), and its structural formula is:. Deferoxamine mesylate is a white to almost white powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-617-10)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-617-01) </PackageDescription>
    <NDC11Code>63323-0617-10</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-617-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-617-02) </PackageDescription>
    <NDC11Code>63323-0617-20</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-50</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-617-50)  / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0617-50</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-1180-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (0406-1180-60) </PackageDescription>
    <NDC11Code>00406-1180-60</NDC11Code>
    <ProductNDC>0406-1180</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202939</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic indicated for the treatment of:.</IndicationAndUsage>
    <Description>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4] thiazepin11-yl-1-piperazinyl)ethoxy]-ethanol hemifumarate (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C21H25N3O2S.½C4H4O4 and it has a molecular weight of 441.54 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is practically insoluble in water. Quetiapine Fumarate Extended-release Tablets USP are supplied for oral administration as 50 mg (maroon), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow) and 400 mg (white). All tablets are film coated. Inactive ingredients for Quetiapine Fumarate Extended-release Tablets USP are lactose anhydrous, hydroxypropyl methylcellulose, ethylcellulose, microcrystalline cellulose, hydroxyethylcellulose and magnesium stearate. The film coating of the coated tablets contains polyvinyl alcohol, titanium dioxide, macrogol/PEG and talc. In addition, the film coating of the 50 mg strength contains yellow iron oxide and red iron oxide; and the film coating of the 200 mg and 300 mg strengths contains yellow iron oxide and black iron oxide. Each 50 mg tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine Fumarate Extended-release Tablets USP meets USP Dissolution Test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-1181-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (0406-1181-60) </PackageDescription>
    <NDC11Code>00406-1181-60</NDC11Code>
    <ProductNDC>0406-1181</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202939</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic indicated for the treatment of:.</IndicationAndUsage>
    <Description>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4] thiazepin11-yl-1-piperazinyl)ethoxy]-ethanol hemifumarate (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C21H25N3O2S.½C4H4O4 and it has a molecular weight of 441.54 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is practically insoluble in water. Quetiapine Fumarate Extended-release Tablets USP are supplied for oral administration as 50 mg (maroon), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow) and 400 mg (white). All tablets are film coated. Inactive ingredients for Quetiapine Fumarate Extended-release Tablets USP are lactose anhydrous, hydroxypropyl methylcellulose, ethylcellulose, microcrystalline cellulose, hydroxyethylcellulose and magnesium stearate. The film coating of the coated tablets contains polyvinyl alcohol, titanium dioxide, macrogol/PEG and talc. In addition, the film coating of the 50 mg strength contains yellow iron oxide and red iron oxide; and the film coating of the 200 mg and 300 mg strengths contains yellow iron oxide and black iron oxide. Each 50 mg tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine Fumarate Extended-release Tablets USP meets USP Dissolution Test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-1182-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (0406-1182-60) </PackageDescription>
    <NDC11Code>00406-1182-60</NDC11Code>
    <ProductNDC>0406-1182</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202939</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic indicated for the treatment of:.</IndicationAndUsage>
    <Description>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4] thiazepin11-yl-1-piperazinyl)ethoxy]-ethanol hemifumarate (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C21H25N3O2S.½C4H4O4 and it has a molecular weight of 441.54 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is practically insoluble in water. Quetiapine Fumarate Extended-release Tablets USP are supplied for oral administration as 50 mg (maroon), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow) and 400 mg (white). All tablets are film coated. Inactive ingredients for Quetiapine Fumarate Extended-release Tablets USP are lactose anhydrous, hydroxypropyl methylcellulose, ethylcellulose, microcrystalline cellulose, hydroxyethylcellulose and magnesium stearate. The film coating of the coated tablets contains polyvinyl alcohol, titanium dioxide, macrogol/PEG and talc. In addition, the film coating of the 50 mg strength contains yellow iron oxide and red iron oxide; and the film coating of the 200 mg and 300 mg strengths contains yellow iron oxide and black iron oxide. Each 50 mg tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine Fumarate Extended-release Tablets USP meets USP Dissolution Test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-1183-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (0406-1183-60) </PackageDescription>
    <NDC11Code>00406-1183-60</NDC11Code>
    <ProductNDC>0406-1183</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202939</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic indicated for the treatment of:.</IndicationAndUsage>
    <Description>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4] thiazepin11-yl-1-piperazinyl)ethoxy]-ethanol hemifumarate (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C21H25N3O2S.½C4H4O4 and it has a molecular weight of 441.54 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is practically insoluble in water. Quetiapine Fumarate Extended-release Tablets USP are supplied for oral administration as 50 mg (maroon), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow) and 400 mg (white). All tablets are film coated. Inactive ingredients for Quetiapine Fumarate Extended-release Tablets USP are lactose anhydrous, hydroxypropyl methylcellulose, ethylcellulose, microcrystalline cellulose, hydroxyethylcellulose and magnesium stearate. The film coating of the coated tablets contains polyvinyl alcohol, titanium dioxide, macrogol/PEG and talc. In addition, the film coating of the 50 mg strength contains yellow iron oxide and red iron oxide; and the film coating of the 200 mg and 300 mg strengths contains yellow iron oxide and black iron oxide. Each 50 mg tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine Fumarate Extended-release Tablets USP meets USP Dissolution Test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>0406-1184-60</NDCCode>
    <PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE (0406-1184-60) </PackageDescription>
    <NDC11Code>00406-1184-60</NDC11Code>
    <ProductNDC>0406-1184</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine Fumarate</ProprietaryName>
    <ProprietaryNameSuffix>Extended-release</ProprietaryNameSuffix>
    <NonProprietaryName>Quetiapine Fumarate</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170515</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA202939</ApplicationNumber>
    <LabelerName>SpecGx LLC</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170515</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic indicated for the treatment of:.</IndicationAndUsage>
    <Description>Quetiapine Fumarate Extended-release Tablets USP is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4] thiazepin11-yl-1-piperazinyl)ethoxy]-ethanol hemifumarate (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C21H25N3O2S.½C4H4O4 and it has a molecular weight of 441.54 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is practically insoluble in water. Quetiapine Fumarate Extended-release Tablets USP are supplied for oral administration as 50 mg (maroon), 150 mg (white), 200 mg (yellow), 300 mg (pale yellow) and 400 mg (white). All tablets are film coated. Inactive ingredients for Quetiapine Fumarate Extended-release Tablets USP are lactose anhydrous, hydroxypropyl methylcellulose, ethylcellulose, microcrystalline cellulose, hydroxyethylcellulose and magnesium stearate. The film coating of the coated tablets contains polyvinyl alcohol, titanium dioxide, macrogol/PEG and talc. In addition, the film coating of the 50 mg strength contains yellow iron oxide and red iron oxide; and the film coating of the 200 mg and 300 mg strengths contains yellow iron oxide and black iron oxide. Each 50 mg tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine Fumarate Extended-release Tablets USP meets USP Dissolution Test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6801-61</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6801-61)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-6801-61</NDC11Code>
    <ProductNDC>0904-6801</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204203</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine fumarate is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2 .C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine extended-release tablets, USP are supplied for oral administration as 50 mg (peach to red), 150 mg (white), 200 mg (yellow), 300 mg (yellow to pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets, USP are hypromellose, hypromellose 2208, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium citrate dihydrate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose 2910, macrogol and titanium dioxide. In addition, red iron oxide (for 50 mg) and yellow iron oxide (for 50 mg, 200 mg and 300 mg) are included in the film coating of specific strengths. Each 50 mg film-coated tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg film-coated tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg film-coated tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine extended-release tablets USP meets USP Dissolution Test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6802-61</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6802-61)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-6802-61</NDC11Code>
    <ProductNDC>0904-6802</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204203</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine fumarate is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2 .C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine extended-release tablets, USP are supplied for oral administration as 50 mg (peach to red), 150 mg (white), 200 mg (yellow), 300 mg (yellow to pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets, USP are hypromellose, hypromellose 2208, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium citrate dihydrate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose 2910, macrogol and titanium dioxide. In addition, red iron oxide (for 50 mg) and yellow iron oxide (for 50 mg, 200 mg and 300 mg) are included in the film coating of specific strengths. Each 50 mg film-coated tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg film-coated tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg film-coated tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine extended-release tablets USP meets USP Dissolution Test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6803-61</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6803-61)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-6803-61</NDC11Code>
    <ProductNDC>0904-6803</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204203</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine fumarate is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2 .C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine extended-release tablets, USP are supplied for oral administration as 50 mg (peach to red), 150 mg (white), 200 mg (yellow), 300 mg (yellow to pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets, USP are hypromellose, hypromellose 2208, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium citrate dihydrate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose 2910, macrogol and titanium dioxide. In addition, red iron oxide (for 50 mg) and yellow iron oxide (for 50 mg, 200 mg and 300 mg) are included in the film coating of specific strengths. Each 50 mg film-coated tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg film-coated tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg film-coated tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine extended-release tablets USP meets USP Dissolution Test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6804-61</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6804-61)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-6804-61</NDC11Code>
    <ProductNDC>0904-6804</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204203</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine fumarate is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2 .C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine extended-release tablets, USP are supplied for oral administration as 50 mg (peach to red), 150 mg (white), 200 mg (yellow), 300 mg (yellow to pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets, USP are hypromellose, hypromellose 2208, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium citrate dihydrate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose 2910, macrogol and titanium dioxide. In addition, red iron oxide (for 50 mg) and yellow iron oxide (for 50 mg, 200 mg and 300 mg) are included in the film coating of specific strengths. Each 50 mg film-coated tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg film-coated tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg film-coated tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine extended-release tablets USP meets USP Dissolution Test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>0904-6805-61</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (0904-6805-61)  / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>00904-6805-61</NDC11Code>
    <ProductNDC>0904-6805</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Quetiapine</ProprietaryName>
    <NonProprietaryName>Quetiapine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20170822</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA204203</ApplicationNumber>
    <LabelerName>Major Pharmaceuticals</LabelerName>
    <SubstanceName>QUETIAPINE FUMARATE</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-28</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170822</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Quetiapine extended-release tablet is an atypical antipsychotic indicated for the treatment of: 1 Schizophrenia (1.1), 2 Bipolar I disorder, manic or mixed episodes (1.2), 3 Bipolar disorder, depressive episodes (1.2), 4 Major depressive disorder, adjunctive therapy with antidepressants (1.3).</IndicationAndUsage>
    <Description>Quetiapine fumarate is an atypical antipsychotic belonging to a chemical class, the dibenzothiazepine derivatives. The chemical designation is 2-[2-(4-dibenzo [b,f] [1,4]thiazepin-11-yl-1-piperazinyl)ethoxy]-ethanol fumarate (2:1) (salt). It is present in tablets as the fumarate salt. All doses and tablet strengths are expressed as milligrams of base, not as fumarate salt. Its molecular formula is C42H50N6O4S2 .C4H4O4 and it has a molecular weight of 883.11 (fumarate salt). The structural formula is. Quetiapine fumarate is a white to off-white crystalline powder which is moderately soluble in water. Quetiapine extended-release tablets, USP are supplied for oral administration as 50 mg (peach to red), 150 mg (white), 200 mg (yellow), 300 mg (yellow to pale yellow), and 400 mg (white). All tablets are capsule shaped and film coated. Inactive ingredients for quetiapine extended-release tablets, USP are hypromellose, hypromellose 2208, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium citrate dihydrate. The film coating for all quetiapine extended-release tablets, USP contain hypromellose 2910, macrogol and titanium dioxide. In addition, red iron oxide (for 50 mg) and yellow iron oxide (for 50 mg, 200 mg and 300 mg) are included in the film coating of specific strengths. Each 50 mg film-coated tablet contains 58 mg of quetiapine fumarate equivalent to 50 mg quetiapine. Each 150 mg film-coated tablet contains 173 mg of quetiapine fumarate equivalent to 150 mg quetiapine. Each 200 mg film-coated tablet contains 230 mg of quetiapine fumarate equivalent to 200 mg quetiapine. Each 300 mg film-coated tablet contains 345 mg of quetiapine fumarate equivalent to 300 mg quetiapine. Each 400 mg film-coated tablet contains 461 mg of quetiapine fumarate equivalent to 400 mg quetiapine. Quetiapine extended-release tablets USP meets USP Dissolution Test 13.</Description>
  </NDC>
  <NDC>
    <NDCCode>10135-173-62</NDCCode>
    <PackageDescription>120 TABLET in 1 BOTTLE (10135-173-62) </PackageDescription>
    <NDC11Code>10135-0173-62</NDC11Code>
    <ProductNDC>10135-173</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Aspirin 81 Mg Enteric Coated</ProprietaryName>
    <NonProprietaryName>Aspirin</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20180801</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part343</ApplicationNumber>
    <LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
    <SubstanceName>ASPIRIN</SubstanceName>
    <StrengthNumber>81</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Platelet Aggregation [PE], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Platelet Aggregation Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-01-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves minor aches and pains.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>10544-173-30</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (10544-173-30)</PackageDescription>
    <NDC11Code>10544-0173-30</NDC11Code>
    <ProductNDC>10544-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</ProprietaryName>
    <NonProprietaryName>Bisoprolol Fumarate And Hydrochlorothiazide</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20131115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA079106</ApplicationNumber>
    <LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
    <SubstanceName>BISOPROLOL FUMARATE; HYDROCHLOROTHIAZIDE</SubstanceName>
    <StrengthNumber>2.5; 6.25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC],Increased Diuresis [PE],Thiazide Diuretic [EPC],Thiazides [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Bisoprolol fumarate and hydrochlorothiazide tablets are indicated in the management of hypertension.</IndicationAndUsage>
    <Description>Bisoprolol fumarate and hydrochlorothiazide tablets USP are indicated for the treatment of hypertension. It combines two antihypertensive agents in a once–daily dosage: a synthetic beta1-selective (cardioselective) adrenoceptor blocking agent (bisoprolol fumarate) and a benzothiadiazine diuretic (hydrochlorothiazide). Bisoprolol fumarate is chemically described as (±)-1-[4-[[-2-(1-methylethoxy)ethoxy]methyl] phenoxy]-3-[(1-methylethyl)amino]-2-propanol(E)-2-butenedioate(2:1)(salt). It possesses an asymmetric carbon atom in its structure and is provided as a racemic mixture. The S(-) enantiomer is responsible for most of the beta-blocking activity. Its molecular formula is (C18H31NO4)2C4H4O4 and it has a molecular weight of 766.97. Its structural formula is. Bisoprolol fumarate is a white crystalline powder, approximately equally hydrophilic and lipophilic, and readily soluble in water, methanol, ethanol, and chloroform. Hydrochlorothiazide (HCTZ) is 6-Chloro-3,4-dihydro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide. It is a white, or practically white, practically odorless crystalline powder. It is slightly soluble in water, sparingly soluble in dilute sodium hydroxide solution, freely soluble in n-butylamine and dimethylformamide, sparingly soluble in methanol, and insoluble in ether, chloroform, and dilute mineral acids. Its molecular formula is C7H8ClN3O4S2 and it has a molecular weight of 297.73. Its structural formula is. Each Bisoprolol Fumarate and Hydrochlorothiazide tablet USP 2.5 mg/6.25 mg for oral administration contains. Bisoprolol fumarate USP…..  2.5 mg. Hydrochlorothiazide USP…. 6.25 mg. Each Bisoprolol Fumarate and Hydrochlorothiazide tablet USP 5 mg/6.25 mg for oral administration contains. Bisoprolol fumarate USP….. 5 mg. Hydrochlorothiazide USP…. 6.25 mg. Each Bisoprolol Fumarate and Hydrochlorothiazide tablet USP 10 mg/6.25 mg for oral administration contains. Bisoprolol fumarate USP….. 10 mg. Hydrochlorothiazide USP…. 6.25 mg. Inactive ingredients include pregelatinized starch, dibasic calcium phosphate anhydrous, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, colloidal silicon dioxide, copovidone and titanium dioxide. The 5 mg/6.25 mg tablet also contains red and yellow iron oxide. The 2.5 mg/6.25 mg tablet also contains yellow iron oxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>10695-173-50</NDCCode>
    <PackageDescription>5 kg in 1 CONTAINER (10695-173-50) </PackageDescription>
    <NDC11Code>10695-0173-50</NDC11Code>
    <ProductNDC>10695-173</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Fluoxetine</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20260806</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Willow Birch Pharma, LLC</LabelerName>
    <SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2026-08-07</LastUpdate>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>06-AUG-26</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>10695-173-70</NDCCode>
    <PackageDescription>25 kg in 1 DRUM (10695-173-70) </PackageDescription>
    <NDC11Code>10695-0173-70</NDC11Code>
    <ProductNDC>10695-173</ProductNDC>
    <ProductTypeName>BULK INGREDIENT</ProductTypeName>
    <NonProprietaryName>Fluoxetine</NonProprietaryName>
    <DosageFormName>POWDER</DosageFormName>
    <StartMarketingDate>20240529</StartMarketingDate>
    <MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
    <LabelerName>Willow Birch Pharma, LLC</LabelerName>
    <SubstanceName>FLUOXETINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>kg/kg</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2025-12-17</LastUpdate>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>29-MAY-24</StartMarketingDatePackage>
  </NDC>
</NDCList>