RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-269-57</NDCCode>
    <PackageDescription>20 VIAL in 1 BOX (63323-269-57)  / 50 mL in 1 VIAL (63323-269-23) </PackageDescription>
    <NDC11Code>63323-0269-57</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091117</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-10</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-10)  / 10 mL in 1 VIAL (63323-269-01) </PackageDescription>
    <NDC11Code>63323-0269-10</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-16</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-16)  / 10 mL in 1 VIAL (63323-269-06) </PackageDescription>
    <NDC11Code>63323-0269-16</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091117</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-20</NDCCode>
    <PackageDescription>25 VIAL in 1 BOX (63323-269-20)  &gt; 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0269-20</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2014-03-05</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>63323-269-29</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-29)  / 20 mL in 1 VIAL (63323-269-22) </PackageDescription>
    <NDC11Code>63323-0269-29</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-37</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-37)  / 20 mL in 1 VIAL (63323-269-25) </PackageDescription>
    <NDC11Code>63323-0269-37</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091117</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-50</NDCCode>
    <PackageDescription>20 VIAL in 1 BOX (63323-269-50)  / 50 mL in 1 VIAL (63323-269-30) </PackageDescription>
    <NDC11Code>63323-0269-50</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-59</NDCCode>
    <PackageDescription>20 VIAL in 1 BOX (63323-269-59)  / 50 mL in 1 VIAL (63323-269-45) </PackageDescription>
    <NDC11Code>63323-0269-59</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-65</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-65)  / 100 mL in 1 VIAL (63323-269-35) </PackageDescription>
    <NDC11Code>63323-0269-65</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-67</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-67)  / 100 mL in 1 VIAL (63323-269-21) </PackageDescription>
    <NDC11Code>63323-0269-67</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091117</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091117</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-69</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-69)  / 100 mL in 1 VIAL (63323-269-41) </PackageDescription>
    <NDC11Code>63323-0269-69</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-70</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-70)  / 20 mL in 1 VIAL (63323-269-33) </PackageDescription>
    <NDC11Code>63323-0269-70</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-77</NDCCode>
    <PackageDescription>20 VIAL in 1 BOX (63323-269-77)  / 50 mL in 1 VIAL (63323-269-75) </PackageDescription>
    <NDC11Code>63323-0269-77</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-78</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-78)  / 100 mL in 1 VIAL (63323-269-31) </PackageDescription>
    <NDC11Code>63323-0269-78</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age , 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age , 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients , 4 Sedation for Adult Patients in Combination with Regional Anesthesia , 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients .</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-269-94</NDCCode>
    <PackageDescription>10 VIAL in 1 BOX (63323-269-94)  / 20 mL in 1 VIAL (63323-269-43) </PackageDescription>
    <NDC11Code>63323-0269-94</NDC11Code>
    <ProductNDC>63323-269</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diprivan</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091113</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE], General Anesthetic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091113</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>DIPRIVAN is an intravenous general anesthetic and sedation drug indicated for: : 1 Induction of General Anesthesia for Patients Greater than or Equal to 3 Years of Age, 2 Maintenance of General Anesthesia for Patients Greater than or Equal to 2 Months of Age, 3 Initiation and Maintenance of Monitored Anesthesia Care (MAC) Sedation in Adult Patients, 4 Sedation for Adult Patients in Combination with Regional Anesthesia, 5 Intensive Care Unit (ICU) Sedation of Intubated, Mechanically Ventilated Adult Patients.</IndicationAndUsage>
    <Description>DIPRIVAN® (propofol) injectable emulsion, USP is an anesthetic available as a sterile, nonpyrogenic white or almost white homogeneous emulsion for intravenous administration. The structural formula is:. Chemical name: 2,6 diisopropylphenol. Molecular formula: C12H18O. Molecular weight: 178.27. Propofol is slightly soluble in water. The pKa is 11. The octanol/water partition coefficient for propofol is 6761:1 at a pH of 6 to 8.5. Each mL of DIPRIVAN® (Propofol) injectable emulsion, USP contains 10 mg of propofol, 100 mg of soybean oil (100 mg/mL), 22.5 mg of glycerol (22.5 mg/mL), 12 mg of purified egg phospholipids (12 mg/mL), 0.055 mg of disodium edetate anhydrous (equivalent to 0.055 mg of disodium edetate) (0.05 mg/mL) as microbial inhibitor, and sodium hydroxide to adjust pH, in water for injection. DIPRIVAN is isotonic and has a pH of 7 to 8.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-270-57</NDCCode>
    <PackageDescription>20 VIAL in 1 BOX (63323-270-57)  &gt; 50 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0270-57</NDC11Code>
    <ProductNDC>63323-270</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Propofol</ProprietaryName>
    <NonProprietaryName>Propofol</NonProprietaryName>
    <DosageFormName>INJECTION, EMULSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091023</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA019627</ApplicationNumber>
    <LabelerName>APP Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>PROPOFOL</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>General Anesthesia [PE],General Anesthetic [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-05-22</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-283-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-283-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-283-01) </PackageDescription>
    <NDC11Code>63323-0283-57</NDC11Code>
    <ProductNDC>63323-283</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polocaine</ProprietaryName>
    <NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION</RouteName>
    <StartMarketingDate>20090720</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089407</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090720</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>POLOCAINE (Mepivacaine HCl Injection, USP), is indicated for production of local or regional analgesia and anesthesia by local infiltration, peripheral nerve block techniques, and central neural techniques including epidural and caudal blocks. The routes of administration and indicated concentrations for mepivacaine are:. See  DOSAGE AND ADMINISTRATION for additional information.  Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of mepivacaine.</IndicationAndUsage>
    <Description>Mepivacaine hydrochloride is 2-Piperidinecarboxamide, N-(2, 6-dimethylphenyl)-1-methyl-, monohydrochloride and has the following structural formula:. C 15H 22N 2O  HCl. It is a white, crystalline, odorless powder, soluble in water, but very resistant to both acid and alkaline hydrolysis. Mepivacaine hydrochloride is a local anesthetic available as sterile isotonic solutions (clear, colorless) in concentrations of 1%, 1.5% and 2% for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Mepivacaine hydrochloride is related chemically and pharmacologically to the amide-type local anesthetics. It contains an amide linkage between the aromatic nucleus and the amino group. Composition of Available Solutions*. The pH of the solution is adjusted between 4.5 and 6.8 with sodium hydroxide or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-285-64</NDCCode>
    <PackageDescription>12 BOTTLE in 1 CASE (63323-285-64)  / 200 mL in 1 BOTTLE (63323-285-57) </PackageDescription>
    <NDC11Code>63323-0285-64</NDC11Code>
    <ProductNDC>63323-285</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-296-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-296-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-296-01) </PackageDescription>
    <NDC11Code>63323-0296-57</NDC11Code>
    <ProductNDC>63323-296</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polocaine</ProprietaryName>
    <NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION</RouteName>
    <StartMarketingDate>20090720</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089410</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090720</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>POLOCAINE (Mepivacaine HCl Injection, USP), is indicated for production of local or regional analgesia and anesthesia by local infiltration, peripheral nerve block techniques, and central neural techniques including epidural and caudal blocks. The routes of administration and indicated concentrations for mepivacaine are:. See  DOSAGE AND ADMINISTRATION for additional information.  Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of mepivacaine.</IndicationAndUsage>
    <Description>Mepivacaine hydrochloride is 2-Piperidinecarboxamide, N-(2, 6-dimethylphenyl)-1-methyl-, monohydrochloride and has the following structural formula:. C 15H 22N 2O  HCl. It is a white, crystalline, odorless powder, soluble in water, but very resistant to both acid and alkaline hydrolysis. Mepivacaine hydrochloride is a local anesthetic available as sterile isotonic solutions (clear, colorless) in concentrations of 1%, 1.5% and 2% for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Mepivacaine hydrochloride is related chemically and pharmacologically to the amide-type local anesthetics. It contains an amide linkage between the aromatic nucleus and the amino group. Composition of Available Solutions*. The pH of the solution is adjusted between 4.5 and 6.8 with sodium hydroxide or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-461-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-461-57)  / 50 mL in 1 VIAL, MULTI-DOSE (63323-461-01) </PackageDescription>
    <NDC11Code>63323-0461-57</NDC11Code>
    <ProductNDC>63323-461</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sensorcaine</ProprietaryName>
    <NonProprietaryName>Bupivacaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20101119</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070967</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>2.5; .005</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure:.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-463-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-463-57)  / 50 mL in 1 VIAL, MULTI-DOSE (63323-463-01) </PackageDescription>
    <NDC11Code>63323-0463-57</NDC11Code>
    <ProductNDC>63323-463</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sensorcaine</ProprietaryName>
    <NonProprietaryName>Bupivacaine Hydrochloride And Epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERINEURAL</RouteName>
    <StartMarketingDate>20101119</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070968</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>5; .005</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure:.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-465-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-465-57)  / 50 mL in 1 VIAL, MULTI-DOSE (63323-465-01) </PackageDescription>
    <NDC11Code>63323-0465-57</NDC11Code>
    <ProductNDC>63323-465</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sensorcaine</ProprietaryName>
    <NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20101119</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018304</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
    <Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-467-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-467-57)  / 50 mL in 1 VIAL, MULTI-DOSE (63323-467-01) </PackageDescription>
    <NDC11Code>63323-0467-57</NDC11Code>
    <ProductNDC>63323-467</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sensorcaine</ProprietaryName>
    <NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>PERINEURAL</RouteName>
    <StartMarketingDate>20101119</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA018304</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101119</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
    <Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-481-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-481-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-481-01) </PackageDescription>
    <NDC11Code>63323-0481-57</NDC11Code>
    <ProductNDC>63323-481</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>5; .005</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-482-05) </PackageDescription>
    <NDC11Code>63323-0482-57</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-483-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-483-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-483-01) </PackageDescription>
    <NDC11Code>63323-0483-57</NDC11Code>
    <ProductNDC>63323-483</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>20; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-484-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-484-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>63323-0484-57</NDC11Code>
    <ProductNDC>63323-484</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-485-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-485-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-485-03) </PackageDescription>
    <NDC11Code>63323-0485-57</NDC11Code>
    <ProductNDC>63323-485</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-486-57</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-486-57)  &gt; 50 mL in 1 VIAL, MULTI-DOSE (63323-486-05) </PackageDescription>
    <NDC11Code>63323-0486-57</NDC11Code>
    <ProductNDC>63323-486</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-491-57</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-491-57)  &gt; 50 mL in 1 VIAL, SINGLE-DOSE (63323-491-01) </PackageDescription>
    <NDC11Code>63323-0491-57</NDC11Code>
    <ProductNDC>63323-491</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
</NDCList>