RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-286-95</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-286-95)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-93) </PackageDescription>
    <NDC11Code>63323-0286-95</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O                     M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-95</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-95)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-010-42) </PackageDescription>
    <NDC11Code>63323-0010-95</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-173-95</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-173-95)  / 2 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0173-95</NDC11Code>
    <ProductNDC>63323-173</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.  When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.  In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species, and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown Gentamicin Injection to be effective in bacterial neonatal sepsis; bacterial septicemia; and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns).  Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing.  The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection, and the important additional concepts contained in the WARNINGS  box above.  If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin type drug before obtaining results of susceptibility testing.  If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin.  Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa.  It has also been found effective when used in conjunction with a penicillin-type drug for the treatment of endocarditis caused by group D streptococci. Gentamicin Injection has also been shown to be effective in the treatment of serious staphylococcal infections.  While not the antibiotic of first choice, gentamicin may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use.  It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived from Micromonospora  purpurea, an actinomycete. It has the following structural formula. Gentamicin Injection is a sterile, nonpyrogenic, aqueous solution for parenteral administration and is available both with and without preservatives. Each mL of the preservative free product contains: Gentamicin sulfate, equivalent to gentamicin 10 mg; Water for Injection q.s.  Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment (3 to 5.5).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-229-95</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 BOX (63323-229-95)  / 25 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0229-95</NDC11Code>
    <ProductNDC>63323-229</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Protamine Sulfate</ProprietaryName>
    <NonProprietaryName>Protamine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001018</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089454</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>PROTAMINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin Binding Activity [MoA], Heparin Reversal Agent [EPC], Reversed Anticoagulation Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-02-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001018</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Protamine Sulfate Injection, USP is indicated in the treatment of heparin overdosage.</IndicationAndUsage>
    <Description>Protamines are simple proteins of low molecular weight that are rich in arginine and strongly basic.  They occur in the sperm of salmon and certain other species of fish. Protamine sulfate occurs as fine white or off-white amorphous or crystalline powder.  It is sparingly soluble in water.  The pH is between 6.0 and 7.0.  The cationic hydrogenated protamine at a pH of 6.8 to 7.1 reacts with anionic heparin at a pH of 5.0 to 7.5 to form an inactive complex. Protamine Sulfate Injection, USP is a sterile, isotonic solution of protamine sulfate.  It acts as a heparin antagonist.  It is also a weak anticoagulant. Each mL contains: Protamine sulfate 10 mg; sodium chloride 9 mg; Water for Injection q.s.  Sulfuric acid and/or dibasic sodium phosphate (heptahydrate) may have been added for pH adjustment. The preparation is preservative free. Protamine sulfate is administered intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-568-95</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (63323-568-95)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0568-95</NDC11Code>
    <ProductNDC>63323-568</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150315</StartMarketingDate>
    <EndMarketingDate>20211031</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2021-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20150315</StartMarketingDatePackage>
    <EndMarketingDatePackage>20210930</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-569-95</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (63323-569-95)  &gt; 1 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0569-95</NDC11Code>
    <ProductNDC>63323-569</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150315</StartMarketingDate>
    <EndMarketingDate>20200531</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2020-06-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20150315</StartMarketingDatePackage>
    <EndMarketingDatePackage>20200531</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-286-00</NDCCode>
    <PackageDescription>12 BOTTLE in 1 CASE (63323-286-00)  / 100 mL in 1 BOTTLE (63323-286-03) </PackageDescription>
    <NDC11Code>63323-0286-00</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-20</NDCCode>
    <PackageDescription>5 AMPULE in 1 BOX (63323-286-20)  / 20 mL in 1 AMPULE (63323-286-01) </PackageDescription>
    <NDC11Code>63323-0286-20</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-23</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-23)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-286-05) </PackageDescription>
    <NDC11Code>63323-0286-23</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-27)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-286-41) </PackageDescription>
    <NDC11Code>63323-0286-27</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-30</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 BOX (63323-286-30)  / 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0286-30</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-31</NDCCode>
    <PackageDescription>5 VIAL, SINGLE-DOSE in 1 BOX (63323-286-31)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-09) </PackageDescription>
    <NDC11Code>63323-0286-31</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-35</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-35)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-11) </PackageDescription>
    <NDC11Code>63323-0286-35</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-37</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-286-37)  &gt; 30 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0286-37</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride Monohydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>APP Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE MONOHYDRATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-05-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-286-38</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-38)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-43) </PackageDescription>
    <NDC11Code>63323-0286-38</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-55</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-55)  / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-51) </PackageDescription>
    <NDC11Code>63323-0286-55</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260709</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 5.3 mg, ropivacaine hydrochloride monohydrate (equivalent to 5.0 mg of ropivacaine hydrochloride anhydrous), and 8.0 mg, of sodium chloride and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-63</NDCCode>
    <PackageDescription>12 BOTTLE in 1 CASE (63323-286-63)  / 200 mL in 1 BOTTLE (63323-286-33) </PackageDescription>
    <NDC11Code>63323-0286-63</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-64</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (63323-286-64) </PackageDescription>
    <NDC11Code>63323-0286-64</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20110531</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-12-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-286-97</NDCCode>
    <PackageDescription>5 SYRINGE, PLASTIC in 1 BOX (63323-286-97)  &gt; 10 mL in 1 SYRINGE, PLASTIC</PackageDescription>
    <NDC11Code>63323-0286-97</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20110531</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC],Amides [CS],Local Anesthesia [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-12-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110531</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-597-10</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-597-10)  / 5.3 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0597-10</NDC11Code>
    <ProductNDC>63323-597</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferoxamine</ProprietaryName>
    <NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20091215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078718</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
    <StrengthNumber>95</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferoxamine Mesylate for Injection is an iron-chelating agent indicated: : 1 As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) , 2 For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) .</IndicationAndUsage>
    <Description>Deferoxamine Mesylate for Injection, USP is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine Mesylate for Injection, USP is supplied as vials containing 500 mg and 2 g of deferoxamine mesylate USP (corresponding to 426.82 mg and 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N- [5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N- hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesul-fonate (salt), and its structural formula is:. Deferoxamine mesylate is a white to almost white powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-599-30</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-599-30)  / 21.1 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0599-30</NDC11Code>
    <ProductNDC>63323-599</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Deferoxamine</ProprietaryName>
    <NonProprietaryName>Deferoxamine Mesylate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20091215</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078718</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DEFEROXAMINE MESYLATE</SubstanceName>
    <StrengthNumber>95</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Iron Chelating Activity [MoA], Iron Chelator [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-07-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Deferoxamine Mesylate for Injection is an iron-chelating agent indicated: : 1 As an adjunct to standard measures for the treatment of acute iron intoxication. (1.1) , 2 For the treatment of transfusional iron overload in patients with chronic anemia. (1.2) .</IndicationAndUsage>
    <Description>Deferoxamine Mesylate for Injection, USP is an iron-chelating agent, available in vials for injection via intramuscular, subcutaneous, and intravenous administration. Deferoxamine Mesylate for Injection, USP is supplied as vials containing 500 mg and 2 g of deferoxamine mesylate USP (corresponding to 426.82 mg and 1.707 g of deferoxamine as free base) in sterile, lyophilized form. Deferoxamine mesylate is N- [5-[3-[(5-aminopentyl)hydroxycarbamoyl]propionamido]pentyl]-3-[[5-(N- hydroxyacetamido)pentyl]carbamoyl]propionohydroxamic acid monomethanesul-fonate (salt), and its structural formula is:. Deferoxamine mesylate is a white to almost white powder. It is freely soluble in water and slightly soluble in methanol. Its molecular weight is 656.79 g/mol.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-617-10)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-617-01) </PackageDescription>
    <NDC11Code>63323-0617-10</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-617-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-617-02) </PackageDescription>
    <NDC11Code>63323-0617-20</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-617-50</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-617-50)  / 50 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0617-50</NDC11Code>
    <ProductNDC>63323-617</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20020801</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075936</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20020801</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone lactate injection is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure.  Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment.  The facility for immediate treatment of potential cardiac events, which may include life threatening ventricular arrhythmias, must be available.  The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics.  There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate injection is a member of a new class of bipyridine inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines.  Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure:. C12H9N3O                                         M.W. 211.2. Milrinone is an off-white to tan crystalline compound.  It is slightly soluble in methanol, and very slightly soluble in chloroform and in water.  As the lactate salt, it is stable and colorless to pale yellow in solution.  Milrinone lactate injection is available as sterile aqueous solutions of the lactate salt of milrinone for injection or infusion intravenously. Sterile, single-dose vials of 10, 20, and 50 mL contain in each mL milrinone lactate equivalent to 1 mg milrinone and 47 mg Dextrose, Anhydrous, USP, in Water for Injection, USP.  The pH is adjusted to between 3.2 and 4.0 with lactic acid or sodium hydroxide.  The total concentration of lactic acid can vary between 0.95 mg/mL and 1.29 mg/mL.  These vials require preparation of dilutions prior to administration to patients intravenously.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9981-01</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (0143-9981-01) </PackageDescription>
    <NDC11Code>00143-9981-01</NDC11Code>
    <ProductNDC>0143-9981</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>200; 28.5</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9981-50</NDCCode>
    <PackageDescription>50 mL in 1 BOTTLE (0143-9981-50) </PackageDescription>
    <NDC11Code>00143-9981-50</NDC11Code>
    <ProductNDC>0143-9981</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>200; 28.5</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9981-75</NDCCode>
    <PackageDescription>75 mL in 1 BOTTLE (0143-9981-75) </PackageDescription>
    <NDC11Code>00143-9981-75</NDC11Code>
    <ProductNDC>0143-9981</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>200; 28.5</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9982-01</NDCCode>
    <PackageDescription>100 mL in 1 BOTTLE (0143-9982-01) </PackageDescription>
    <NDC11Code>00143-9982-01</NDC11Code>
    <ProductNDC>0143-9982</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>400; 57</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9982-50</NDCCode>
    <PackageDescription>50 mL in 1 BOTTLE (0143-9982-50) </PackageDescription>
    <NDC11Code>00143-9982-50</NDC11Code>
    <ProductNDC>0143-9982</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>400; 57</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9982-75</NDCCode>
    <PackageDescription>75 mL in 1 BOTTLE (0143-9982-75) </PackageDescription>
    <NDC11Code>00143-9982-75</NDC11Code>
    <ProductNDC>0143-9982</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>POWDER, FOR SUSPENSION</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071201</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065191</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANIC ACID</SubstanceName>
    <StrengthNumber>400; 57</StrengthNumber>
    <StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-03-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20071201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Amoxicillin and Clavulanate Potassium for Oral Suspension is indicated for the treatment of infections in adults and pediatric patients, due to susceptible isolates of the designated bacteria in the conditions listed below: 1 Lower Respiratory Tract Infections -caused by beta‑lactamase‑producing isolates of Haemophilus influenzae and Moraxella catarrhalis., 2 Acute Bacterial Otitis Media -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 3 Sinusitis -caused by beta‑lactamase‑producing isolates of H. influenzae and M. catarrhalis., 4 Skin and Skin Structure Infections -caused by beta‑lactamase‑producing isolates of Staphylococcus aureus, Escherichia coli, and Klebsiella species., 5 Urinary Tract Infections -caused by beta‑lactamase‑producing isolates of E. coli, Klebsiella species, and Enterobacter species.</IndicationAndUsage>
    <Description>Amoxicillin and Clavulanate Potassium for Oral Suspension, USP is an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients:Aspartame, colloidal silicon dioxide, HPMC 2910/ hypromellose 5 cP, silicon dioxide, succinic acid, xanthan gum, golden syrup flavor, orange flavor. Amoxicillin and Clavulanate Potassium for Oral Suspension, USP. 400 mg/57 mg: Following constitution, each 5 mL of oral suspension contains 400 mg of amoxicillin as the trihydrate, and 57 mg of clavulanic acid (equivalent to 68 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 400 mg/57 mg per 5 mL suspension contains 0.286 mEq of potassium). 200 mg/28.5 mg: Following constitution, each 5 mL of oral suspension contains 200 mg of amoxicillin as the trihydrate, and 28.5 mg of clavulanic acid (equivalent to 34 mg of clavulanate potassium). Amoxicillin and Clavulanate Potassium oral suspension contains potassium (Each 5 mL of reconstituted amoxicillin and clavulanate potassium 200 mg/28.5 mg per 5 mL suspension contains 0.143 mEq of potassium).</Description>
  </NDC>
</NDCList>