{
"NDC": [
{
"NDCCode": "63323-303-55",
"PackageDescription": "6 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-303-55) / 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-303-21) ",
"NDC11Code": "63323-0303-55",
"ProductNDC": "63323-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin Sulfate",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051123",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050789",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "1200",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2024-02-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051123",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin for Injection, is an aminoglycoside antibacterial indicated for the treatment of serious bacterial infections caused by susceptible isolates of the designated bacteria in the diseases listed below (1.1): : 1 Septicemia in the pediatric patient and adults caused by P. aeruginosa, E. coli, and Klebsiella species (spp). , 2 Lower respiratory tract infections caused by P. aeruginosa, Klebsiella spp, Enterobacter spp, Serratia spp, E. coli, and S. aureus, 3 Serious central nervous system infections (meningitis) caused by susceptible organisms. , 4 Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella spp., and Enterobacter spp. , 5 Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus spp, E. coli, Klebsiella spp., Enterobacter spp., and S. aureus. Complicated urinary tract infections caused by P. aeruginosa, Proteus spp., (indole-positive and indole-negative), E. coli, Klebsiella spp., .",
"Description": "Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C18H37N5O9)25H2SO4. The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows:. Figure 2: Tobramycin Structure."
},
{
"NDCCode": "63323-303-51",
"PackageDescription": "6 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-303-51) / 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-303-01) ",
"NDC11Code": "63323-0303-51",
"ProductNDC": "63323-303",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin Sulfate",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20051123",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA050789",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "1200",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2024-01-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20051123",
"SamplePackage": "N",
"IndicationAndUsage": "Tobramycin for Injection, is an aminoglycoside antibacterial indicated for the treatment of serious bacterial infections caused by susceptible isolates of the designated bacteria in the diseases listed below (1.1): : 1 Septicemia in the pediatric patient and adults caused by P. aeruginosa, E. coli, and Klebsiella species (spp). , 2 Lower respiratory tract infections caused by P. aeruginosa, Klebsiella spp, Enterobacter spp, Serratia spp, E. coli, and S. aureus, 3 Serious central nervous system infections (meningitis) caused by susceptible organisms. , 4 Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella spp., and Enterobacter spp. , 5 Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus spp, E. coli, Klebsiella spp., Enterobacter spp., and S. aureus. Complicated urinary tract infections caused by P. aeruginosa, Proteus spp., (indole-positive and indole-negative), E. coli, Klebsiella spp., Enterobacter spp., Serratia spp., S. aureus, Providencia spp., and Citrobacter spp. .",
"Description": "Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C18H37N5O9)25H2SO4. The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows:. Figure 2: Tobramycin Structure."
},
{
"NDCCode": "51706-303-02",
"PackageDescription": "1 BOTTLE in 1 PACKAGE (51706-303-02) > 55 mL in 1 BOTTLE (51706-303-01)",
"NDC11Code": "51706-0303-02",
"ProductNDC": "51706-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Bodycology",
"ProprietaryNameSuffix": "Moisturizing Hand Sanitizer Cucumber Melon",
"NonProprietaryName": "Alcohol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20100101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333",
"LabelerName": "Landy International",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Directions:. -Wet hands with product and allow to dry without wiping. -For children under 6, use only under adult supervision. -Not recommended for infants."
},
{
"NDCCode": "59078-303-02",
"PackageDescription": "1 BOTTLE, PUMP in 1 CARTON (59078-303-02) > 55 mL in 1 BOTTLE, PUMP (59078-303-01)",
"NDC11Code": "59078-0303-02",
"ProductNDC": "59078-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "The Hayan Cherry Blossom Brightening Essence",
"NonProprietaryName": "Niacinamide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160501",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "TONYMOLY CO.,LTD",
"SubstanceName": "NIACINAMIDE",
"StrengthNumber": "1.1",
"StrengthUnit": "g/55mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Use: helps prevent and relieve chapped or cracked skin."
},
{
"NDCCode": "68196-303-55",
"PackageDescription": "3 CARTON in 1 CARTON (68196-303-55) / 14 BLISTER PACK in 1 CARTON / 1 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK",
"NDC11Code": "68196-0303-55",
"ProductNDC": "68196-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Members Mark Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20180510",
"EndMarketingDate": "20251101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA209400",
"LabelerName": "Sam's West Inc",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20180510",
"EndMarketingDatePackage": "20251101",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
},
{
"NDCCode": "78280-303-02",
"PackageDescription": "55 mL in 1 BOTTLE, SPRAY (78280-303-02) ",
"NDC11Code": "78280-0303-02",
"ProductNDC": "78280-303",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Kericure Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200410",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "505G(a)(3)",
"LabelerName": "Kericure Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200410",
"SamplePackage": "N",
"IndicationAndUsage": "Uses to decrease bacteria on the skin that could cause disease recommended for repeated use."
},
{
"NDCCode": "63323-193-55",
"PackageDescription": "1 VIAL in 1 BOX (63323-193-55) / 5 mL in 1 VIAL",
"NDC11Code": "63323-0193-55",
"ProductNDC": "63323-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Irinotecan Hydrochloride",
"NonProprietaryName": "Irinotecan Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20090401",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077776",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "IRINOTECAN HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090401",
"SamplePackage": "N",
"IndicationAndUsage": "Irinotecan hydrochloride injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.",
"Description": "Irinotecan hydrochloride injection is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan hydrochloride injection is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide or hydrochloric acid. Irinotecan hydrochloride injection is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP. Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminata or is chemically synthesized. The chemical name is (S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1H-pyrano[3',4':6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4'bipiperidine]-1'- carboxylate, monohydrochloride, trihydrate. Its empirical formula is C33H38N4O6HCl3H2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:."
},
{
"NDCCode": "63323-262-55",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-55) > 1 mL in 1 VIAL",
"NDC11Code": "63323-0262-55",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000319",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-285-67",
"PackageDescription": "12 BOTTLE in 1 CASE (63323-285-67) / 100 mL in 1 BOTTLE (63323-285-55) ",
"NDC11Code": "63323-0285-67",
"ProductNDC": "63323-285",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION",
"StartMarketingDate": "20090804",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090804",
"SamplePackage": "N",
"IndicationAndUsage": "NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "63323-286-55",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-55) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-51) ",
"NDC11Code": "63323-0286-55",
"ProductNDC": "63323-286",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "19960924",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-07-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260709",
"SamplePackage": "N",
"IndicationAndUsage": "NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 5.3 mg, ropivacaine hydrochloride monohydrate (equivalent to 5.0 mg of ropivacaine hydrochloride anhydrous), and 8.0 mg, of sodium chloride and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "63323-289-55",
"PackageDescription": "5 TUBE in 1 BOX (63323-289-55) > 5 g in 1 TUBE",
"NDC11Code": "63323-0289-55",
"ProductNDC": "63323-289",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Emla",
"NonProprietaryName": "Lidocaine",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019941",
"LabelerName": "APP Pharmaceuticals, LLC",
"SubstanceName": "LIDOCAINE; PRILOCAINE",
"StrengthNumber": "25; 25",
"StrengthUnit": "mg/g; mg/g",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2017-01-30"
},
{
"NDCCode": "63323-306-55",
"PackageDescription": "25 VIAL in 1 TRAY (63323-306-55) > 2 mL in 1 VIAL",
"NDC11Code": "63323-0306-55",
"ProductNDC": "63323-306",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tobramycin",
"NonProprietaryName": "Tobramycin Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20051123",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065122",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "TOBRAMYCIN SULFATE",
"StrengthNumber": "40",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2018-05-10",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "63323-614-55",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-614-55) > 1 mL in 1 VIAL, SINGLE-DOSE (63323-614-21) ",
"NDC11Code": "63323-0614-55",
"ProductNDC": "63323-614",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydralazine Hydrochloride",
"NonProprietaryName": "Hydralazine Hydrochloride",
"DosageFormName": "INJECTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20110131",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040388",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HYDRALAZINE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]",
"Status": "Active",
"LastUpdate": "2022-08-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20110131",
"SamplePackage": "N",
"IndicationAndUsage": "Severe essential hypertension when the drug cannot be given orally or when there is an urgent need to lower blood pressure.",
"Description": "Hydralazine Hydrochloride Injection, USP is an antihypertensive available in a 2 mL vial for intravenous and intramuscular administration. Each mL of the sterile, nonpyrogenic colorless solution contains hydralazine hydrochloride USP, 20 mg; methylparaben NF, 0.65 mg; propylparaben NF, 0.35 mg; propylene glycol USP, 103.6 mg, and Water for Injection, USP q.s. The pH of the solution is 3.4 to 4.4. pH may be adjusted with hydrochloric acid and/or sodium hydroxide. Hydralazine hydrochloride is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition."
},
{
"NDCCode": "63323-626-55",
"PackageDescription": "20 BAG in 1 CASE (63323-626-55) / 500 mL in 1 BAG (63323-626-04) ",
"NDC11Code": "63323-0626-55",
"ProductNDC": "63323-626",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208122",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "450",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "63323-762-55",
"PackageDescription": "1 VIAL in 1 BOX (63323-762-55) > 4 mL in 1 VIAL",
"NDC11Code": "63323-0762-55",
"ProductNDC": "63323-762",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topotecan Hydrochloride",
"NonProprietaryName": "Topotecan Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150916",
"EndMarketingDate": "20160318",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091376",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "TOPOTECAN HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2016-03-25"
},
{
"NDCCode": "69677-071-02",
"PackageDescription": "1 KIT in 1 BOX (69677-071-02) * .9 mL in 1 PACKET (67777-130-02) * .55 mL in 1 POUCH (67777-121-14) * 1 mL in 1 VIAL (63323-506-01) ",
"NDC11Code": "69677-0071-02",
"ProductNDC": "69677-071",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mas Care-pak Dexamethasone",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "KIT",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; TOPICAL",
"StartMarketingDate": "20171101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040491",
"LabelerName": "MAS Management Group Inc.",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
},
{
"NDCCode": "70112-555-02",
"PackageDescription": "1 KIT in 1 BOX (70112-555-02) * .55 mL in 1 POUCH (67777-121-14) * 1 mL in 1 VIAL (63323-506-01) * .9 mL in 1 PACKET (67777-130-02) ",
"NDC11Code": "70112-0555-02",
"ProductNDC": "70112-555",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topidex",
"NonProprietaryName": "Dexamethasone Surgical Combo Kit",
"DosageFormName": "KIT",
"StartMarketingDate": "20180416",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA040491",
"LabelerName": "Topicare Management, LLC",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180416",
"SamplePackage": "N",
"Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
},
{
"NDCCode": "63323-572-70",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (63323-572-70) > 20 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "63323-0572-70",
"ProductNDC": "63323-572",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clofarabine",
"NonProprietaryName": "Clofarabine",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170510",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CLOFARABINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2020-07-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170510",
"SamplePackage": "N",
"IndicationAndUsage": "Clofarabine Injection is indicated for the treatment of pediatric patients 1 to 21 years old with relapsed or refractory acute lymphoblastic leukemia after at least two prior regimens. This indication is based upon response rate. There are no trials verifying an improvement in disease-related symptoms or increased survival with Clofarabine Injection.",
"Description": "Clofarabine Injection contains clofarabine, a purine nucleoside metabolic inhibitor. The chemical name of clofarabine is 2-chloro-9-(2-deoxy-2-fluoro-β-D-arabinofuranosyl)-9H-purin-6-amine. Its molecular formula is C10H11ClFN5O3 with a molecular weight of 303.68 Daltons. The molecular structure of clofarabine is. Clofarabine Injection (1 mg/mL) is supplied in a 20 mL, single-dose vial. The 20 mL vial contains 20 mg clofarabine formulated in 20 mL unbuffered normal saline (comprised of Water for Injection, USP, and Sodium Chloride, USP). The pH range of the solution is 4.5 to 7.5. The solution is sterile, clear and practically colorless, and is preservative-free."
},
{
"NDCCode": "0378-6470-44",
"PackageDescription": "24 POUCH in 1 CARTON (0378-6470-44) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "00378-6470-44",
"ProductNDC": "0378-6470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203753",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190619",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "0378-6470-97",
"PackageDescription": "10 POUCH in 1 CARTON (0378-6470-97) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "00378-6470-97",
"ProductNDC": "0378-6470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203753",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190619",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "0378-6470-99",
"PackageDescription": "4 POUCH in 1 CARTON (0378-6470-99) / 1 PATCH in 1 POUCH (0378-6470-16) / 3 d in 1 PATCH",
"NDC11Code": "00378-6470-99",
"ProductNDC": "0378-6470",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20190619",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203753",
"LabelerName": "Mylan Pharmaceuticals Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190619",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system."
},
{
"NDCCode": "0591-2258-04",
"PackageDescription": "4 POUCH in 1 CARTON (0591-2258-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "00591-2258-04",
"ProductNDC": "0591-2258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "SYSTEM",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20220512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208769",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220512",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system."
},
{
"NDCCode": "0591-2258-23",
"PackageDescription": "24 POUCH in 1 CARTON (0591-2258-23) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "00591-2258-23",
"ProductNDC": "0591-2258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "SYSTEM",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20220512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208769",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220512",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system."
},
{
"NDCCode": "0591-2258-79",
"PackageDescription": "10 POUCH in 1 CARTON (0591-2258-79) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "00591-2258-79",
"ProductNDC": "0591-2258",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Scopolamine",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "SYSTEM",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20220512",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208769",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-06-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220512",
"SamplePackage": "N",
"IndicationAndUsage": "Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system."
},
{
"NDCCode": "10019-008-01",
"PackageDescription": "1 PATCH in 1 POUCH (10019-008-01) / 3 d in 1 PATCH",
"NDC11Code": "10019-0008-01",
"ProductNDC": "10019-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20260610",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "10019-008-04",
"PackageDescription": "4 POUCH in 1 BOX (10019-008-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "10019-0008-04",
"ProductNDC": "10019-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250610",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "10019-008-10",
"PackageDescription": "10 POUCH in 1 BOX (10019-008-10) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "10019-0008-10",
"ProductNDC": "10019-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250610",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "10019-008-24",
"PackageDescription": "24 POUCH in 1 BOX (10019-008-24) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "10019-0008-24",
"ProductNDC": "10019-008",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2025-07-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250610",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "10019-553-03",
"PackageDescription": "10 POUCH in 1 BOX (10019-553-03) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "10019-0553-03",
"ProductNDC": "10019-553",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"EndMarketingDate": "20250228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161201",
"EndMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌP transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
},
{
"NDCCode": "10019-553-04",
"PackageDescription": "24 POUCH in 1 BOX (10019-553-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH",
"NDC11Code": "10019-0553-04",
"ProductNDC": "10019-553",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Transderm Scop",
"NonProprietaryName": "Scopolamine",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20161201",
"EndMarketingDate": "20250228",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017874",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "SCOPOLAMINE",
"StrengthNumber": "1",
"StrengthUnit": "mg/3d",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-02-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161201",
"EndMarketingDatePackage": "20250228",
"SamplePackage": "N",
"IndicationAndUsage": "TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.",
"Description": "TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌP transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63323-303-55</NDCCode>
<PackageDescription>6 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-303-55) / 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-303-21) </PackageDescription>
<NDC11Code>63323-0303-55</NDC11Code>
<ProductNDC>63323-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051123</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050789</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>1200</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-02-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin for Injection, is an aminoglycoside antibacterial indicated for the treatment of serious bacterial infections caused by susceptible isolates of the designated bacteria in the diseases listed below (1.1): : 1 Septicemia in the pediatric patient and adults caused by P. aeruginosa, E. coli, and Klebsiella species (spp). , 2 Lower respiratory tract infections caused by P. aeruginosa, Klebsiella spp, Enterobacter spp, Serratia spp, E. coli, and S. aureus, 3 Serious central nervous system infections (meningitis) caused by susceptible organisms. , 4 Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella spp., and Enterobacter spp. , 5 Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus spp, E. coli, Klebsiella spp., Enterobacter spp., and S. aureus. Complicated urinary tract infections caused by P. aeruginosa, Proteus spp., (indole-positive and indole-negative), E. coli, Klebsiella spp., .</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C18H37N5O9)25H2SO4. The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows:. Figure 2: Tobramycin Structure.</Description>
</NDC>
<NDC>
<NDCCode>63323-303-51</NDCCode>
<PackageDescription>6 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-303-51) / 30 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-303-01) </PackageDescription>
<NDC11Code>63323-0303-51</NDC11Code>
<ProductNDC>63323-303</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20051123</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA050789</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>1200</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20051123</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Tobramycin for Injection, is an aminoglycoside antibacterial indicated for the treatment of serious bacterial infections caused by susceptible isolates of the designated bacteria in the diseases listed below (1.1): : 1 Septicemia in the pediatric patient and adults caused by P. aeruginosa, E. coli, and Klebsiella species (spp). , 2 Lower respiratory tract infections caused by P. aeruginosa, Klebsiella spp, Enterobacter spp, Serratia spp, E. coli, and S. aureus, 3 Serious central nervous system infections (meningitis) caused by susceptible organisms. , 4 Intra-abdominal infections, including peritonitis, caused by E. coli, Klebsiella spp., and Enterobacter spp. , 5 Skin, bone, and skin structure infections caused by P. aeruginosa, Proteus spp, E. coli, Klebsiella spp., Enterobacter spp., and S. aureus. Complicated urinary tract infections caused by P. aeruginosa, Proteus spp., (indole-positive and indole-negative), E. coli, Klebsiella spp., Enterobacter spp., Serratia spp., S. aureus, Providencia spp., and Citrobacter spp. .</IndicationAndUsage>
<Description>Tobramycin sulfate, a water-soluble aminoglycoside antibacterial, drug derived from the actinomycete Streptomyces tenebrarius. Tobramycin for Injection, USP is supplied as a sterile powder in a pharmacy bulk package vial for intravenous use. It is intended for reconstitution with 30 mL of Sterile Water for Injection, USP. Each vial contains tobramycin sulfate equivalent to 1.2 g of tobramycin. After reconstitution, the solution will contain 40 mg of tobramycin per mL. The product contains no preservative or sodium bisulfite. Tobramycin sulfate is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[2,6-diamino-2,3,6-trideoxy-α-D-ribo-hexopyranosyl-(1→6)]-2-deoxy-L-streptamine, sulfate (2:5)(salt) and has the molecular formula (C18H37N5O9)25H2SO4. The molecular weight is 1425.42 g/mol. The molecular weight of the free base is 467.51 g/mol. The structural formula of tobramycin, free base, is as follows:. Figure 2: Tobramycin Structure.</Description>
</NDC>
<NDC>
<NDCCode>51706-303-02</NDCCode>
<PackageDescription>1 BOTTLE in 1 PACKAGE (51706-303-02) > 55 mL in 1 BOTTLE (51706-303-01)</PackageDescription>
<NDC11Code>51706-0303-02</NDC11Code>
<ProductNDC>51706-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Bodycology</ProprietaryName>
<ProprietaryNameSuffix>Moisturizing Hand Sanitizer Cucumber Melon</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20100101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333</ApplicationNumber>
<LabelerName>Landy International</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Directions:. -Wet hands with product and allow to dry without wiping. -For children under 6, use only under adult supervision. -Not recommended for infants.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>59078-303-02</NDCCode>
<PackageDescription>1 BOTTLE, PUMP in 1 CARTON (59078-303-02) > 55 mL in 1 BOTTLE, PUMP (59078-303-01)</PackageDescription>
<NDC11Code>59078-0303-02</NDC11Code>
<ProductNDC>59078-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>The Hayan Cherry Blossom Brightening Essence</ProprietaryName>
<NonProprietaryName>Niacinamide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160501</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>TONYMOLY CO.,LTD</LabelerName>
<SubstanceName>NIACINAMIDE</SubstanceName>
<StrengthNumber>1.1</StrengthNumber>
<StrengthUnit>g/55mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Use: helps prevent and relieve chapped or cracked skin.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68196-303-55</NDCCode>
<PackageDescription>3 CARTON in 1 CARTON (68196-303-55) / 14 BLISTER PACK in 1 CARTON / 1 TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>68196-0303-55</NDC11Code>
<ProductNDC>68196-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Members Mark Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180510</StartMarketingDate>
<EndMarketingDate>20251101</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA209400</ApplicationNumber>
<LabelerName>Sam's West Inc</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20180510</StartMarketingDatePackage>
<EndMarketingDatePackage>20251101</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>78280-303-02</NDCCode>
<PackageDescription>55 mL in 1 BOTTLE, SPRAY (78280-303-02) </PackageDescription>
<NDC11Code>78280-0303-02</NDC11Code>
<ProductNDC>78280-303</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Kericure Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200410</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>505G(a)(3)</ApplicationNumber>
<LabelerName>Kericure Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses to decrease bacteria on the skin that could cause disease recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63323-193-55</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (63323-193-55) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0193-55</NDC11Code>
<ProductNDC>63323-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Irinotecan Hydrochloride</ProprietaryName>
<NonProprietaryName>Irinotecan Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20090401</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077776</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>IRINOTECAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Irinotecan hydrochloride injection is indicated for patients with metastatic carcinoma of the colon or rectum whose disease has recurred or progressed following initial fluorouracil-based therapy.</IndicationAndUsage>
<Description>Irinotecan hydrochloride injection is an antineoplastic agent of the topoisomerase I inhibitor class. Irinotecan hydrochloride injection is supplied as a sterile, pale yellow, clear, aqueous solution. Each milliliter of solution contains 20 mg of irinotecan hydrochloride (on the basis of the trihydrate salt), 45 mg of sorbitol, NF, and 0.9 mg of lactic acid, USP. The pH of the solution has been adjusted to 3.5 (range, 3.0 to 3.8) with sodium hydroxide or hydrochloric acid. Irinotecan hydrochloride injection is intended for dilution with 5% Dextrose Injection, USP (D5W), or 0.9% Sodium Chloride Injection, USP, prior to intravenous infusion. The preferred diluent is 5% Dextrose Injection, USP. Irinotecan hydrochloride is a semisynthetic derivative of camptothecin, an alkaloid extract from plants such as Camptotheca acuminata or is chemically synthesized. The chemical name is (S)-4,11-diethyl-3,4,12,14-tetrahydro-4-hydroxy-3,14-dioxo1H-pyrano[3',4':6,7]-indolizino[1,2-b]quinolin-9-yl-[1,4'bipiperidine]-1'- carboxylate, monohydrochloride, trihydrate. Its empirical formula is C33H38N4O6HCl3H2O and molecular weight is 677.19. It is slightly soluble in water and organic solvents. Its structural formula is as follows:.</Description>
</NDC>
<NDC>
<NDCCode>63323-262-55</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-55) > 1 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0262-55</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000319</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2- sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-285-67</NDCCode>
<PackageDescription>12 BOTTLE in 1 CASE (63323-285-67) / 100 mL in 1 BOTTLE (63323-285-55) </PackageDescription>
<NDC11Code>63323-0285-67</NDC11Code>
<ProductNDC>63323-285</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION</RouteName>
<StartMarketingDate>20090804</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>63323-286-55</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-55) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-51) </PackageDescription>
<NDC11Code>63323-0286-55</NDC11Code>
<ProductNDC>63323-286</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>19960924</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260709</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 5.3 mg, ropivacaine hydrochloride monohydrate (equivalent to 5.0 mg of ropivacaine hydrochloride anhydrous), and 8.0 mg, of sodium chloride and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>63323-289-55</NDCCode>
<PackageDescription>5 TUBE in 1 BOX (63323-289-55) > 5 g in 1 TUBE</PackageDescription>
<NDC11Code>63323-0289-55</NDC11Code>
<ProductNDC>63323-289</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Emla</ProprietaryName>
<NonProprietaryName>Lidocaine</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019941</ApplicationNumber>
<LabelerName>APP Pharmaceuticals, LLC</LabelerName>
<SubstanceName>LIDOCAINE; PRILOCAINE</SubstanceName>
<StrengthNumber>25; 25</StrengthNumber>
<StrengthUnit>mg/g; mg/g</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Antiarrhythmic [EPC],Local Anesthesia [PE],Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-30</LastUpdate>
</NDC>
<NDC>
<NDCCode>63323-306-55</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-306-55) > 2 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0306-55</NDC11Code>
<ProductNDC>63323-306</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tobramycin</ProprietaryName>
<NonProprietaryName>Tobramycin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20051123</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065122</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>TOBRAMYCIN SULFATE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC],Aminoglycosides [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-05-10</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>63323-614-55</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-614-55) > 1 mL in 1 VIAL, SINGLE-DOSE (63323-614-21) </PackageDescription>
<NDC11Code>63323-0614-55</NDC11Code>
<ProductNDC>63323-614</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydralazine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydralazine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20110131</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040388</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HYDRALAZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Arteriolar Vasodilation [PE], Arteriolar Vasodilator [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-08-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110131</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Severe essential hypertension when the drug cannot be given orally or when there is an urgent need to lower blood pressure.</IndicationAndUsage>
<Description>Hydralazine Hydrochloride Injection, USP is an antihypertensive available in a 2 mL vial for intravenous and intramuscular administration. Each mL of the sterile, nonpyrogenic colorless solution contains hydralazine hydrochloride USP, 20 mg; methylparaben NF, 0.65 mg; propylparaben NF, 0.35 mg; propylene glycol USP, 103.6 mg, and Water for Injection, USP q.s. The pH of the solution is 3.4 to 4.4. pH may be adjusted with hydrochloric acid and/or sodium hydroxide. Hydralazine hydrochloride is 1-hydrazinophthalazine monohydrochloride, and its structural formula is. Hydralazine hydrochloride USP is a white to off-white, odorless crystalline powder. It is soluble in water, slightly soluble in alcohol, and very slightly soluble in ether. It melts at about 275°C, with decomposition.</Description>
</NDC>
<NDC>
<NDCCode>63323-626-55</NDCCode>
<PackageDescription>20 BAG in 1 CASE (63323-626-55) / 500 mL in 1 BAG (63323-626-04) </PackageDescription>
<NDC11Code>63323-0626-55</NDC11Code>
<ProductNDC>63323-626</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208122</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>63323-762-55</NDCCode>
<PackageDescription>1 VIAL in 1 BOX (63323-762-55) > 4 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0762-55</NDC11Code>
<ProductNDC>63323-762</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topotecan Hydrochloride</ProprietaryName>
<NonProprietaryName>Topotecan Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150916</StartMarketingDate>
<EndMarketingDate>20160318</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091376</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>TOPOTECAN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Topoisomerase Inhibitor [EPC],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2016-03-25</LastUpdate>
</NDC>
<NDC>
<NDCCode>69677-071-02</NDCCode>
<PackageDescription>1 KIT in 1 BOX (69677-071-02) * .9 mL in 1 PACKET (67777-130-02) * .55 mL in 1 POUCH (67777-121-14) * 1 mL in 1 VIAL (63323-506-01) </PackageDescription>
<NDC11Code>69677-0071-02</NDC11Code>
<ProductNDC>69677-071</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mas Care-pak Dexamethasone</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; TOPICAL</RouteName>
<StartMarketingDate>20171101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040491</ApplicationNumber>
<LabelerName>MAS Management Group Inc.</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<Description>Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>70112-555-02</NDCCode>
<PackageDescription>1 KIT in 1 BOX (70112-555-02) * .55 mL in 1 POUCH (67777-121-14) * 1 mL in 1 VIAL (63323-506-01) * .9 mL in 1 PACKET (67777-130-02) </PackageDescription>
<NDC11Code>70112-0555-02</NDC11Code>
<ProductNDC>70112-555</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topidex</ProprietaryName>
<NonProprietaryName>Dexamethasone Surgical Combo Kit</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20180416</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA040491</ApplicationNumber>
<LabelerName>Topicare Management, LLC</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180416</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>63323-572-70</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (63323-572-70) > 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>63323-0572-70</NDC11Code>
<ProductNDC>63323-572</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clofarabine</ProprietaryName>
<NonProprietaryName>Clofarabine</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170510</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CLOFARABINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-07-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clofarabine Injection is indicated for the treatment of pediatric patients 1 to 21 years old with relapsed or refractory acute lymphoblastic leukemia after at least two prior regimens. This indication is based upon response rate. There are no trials verifying an improvement in disease-related symptoms or increased survival with Clofarabine Injection.</IndicationAndUsage>
<Description>Clofarabine Injection contains clofarabine, a purine nucleoside metabolic inhibitor. The chemical name of clofarabine is 2-chloro-9-(2-deoxy-2-fluoro-β-D-arabinofuranosyl)-9H-purin-6-amine. Its molecular formula is C10H11ClFN5O3 with a molecular weight of 303.68 Daltons. The molecular structure of clofarabine is. Clofarabine Injection (1 mg/mL) is supplied in a 20 mL, single-dose vial. The 20 mL vial contains 20 mg clofarabine formulated in 20 mL unbuffered normal saline (comprised of Water for Injection, USP, and Sodium Chloride, USP). The pH range of the solution is 4.5 to 7.5. The solution is sterile, clear and practically colorless, and is preservative-free.</Description>
</NDC>
<NDC>
<NDCCode>0378-6470-44</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (0378-6470-44) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-6470-44</NDC11Code>
<ProductNDC>0378-6470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203753</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0378-6470-97</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (0378-6470-97) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-6470-97</NDC11Code>
<ProductNDC>0378-6470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203753</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0378-6470-99</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0378-6470-99) / 1 PATCH in 1 POUCH (0378-6470-16) / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00378-6470-99</NDC11Code>
<ProductNDC>0378-6470</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20190619</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203753</ApplicationNumber>
<LabelerName>Mylan Pharmaceuticals Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190619</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The scopolamine transdermal system is a circular, 1.8 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer of peach-colored polyethylene/polyester film printed with brown ink; (2) a solid matrix drug reservoir layer of silicone adhesive, scopolamine and povidone; (3) a microporous polypropylene membrane; and (4) an adhesive formulation of silicone adhesive, povidone and scopolamine. A protective, oversized release liner of fluoropolymer-coated polyester, which covers the adhesive formulation layer, is removed before the system is used. The brown ink contains acrylic polymers, carbon black, iron oxides (red and yellow), polydimethylsiloxane, polyethylene wax, polytetrafluoroethylene, polyvinylpyrrolidone, sodium dioctyl sulfosuccinate and triethanolamine. Scopolamine transdermal systems are packaged with an additional piece of protective film covering the system within each pouch. This piece of protective film is removed and discarded at the time of use. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0591-2258-04</NDCCode>
<PackageDescription>4 POUCH in 1 CARTON (0591-2258-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00591-2258-04</NDC11Code>
<ProductNDC>0591-2258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>SYSTEM</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20220512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208769</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0591-2258-23</NDCCode>
<PackageDescription>24 POUCH in 1 CARTON (0591-2258-23) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00591-2258-23</NDC11Code>
<ProductNDC>0591-2258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>SYSTEM</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20220512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208769</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>0591-2258-79</NDCCode>
<PackageDescription>10 POUCH in 1 CARTON (0591-2258-79) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>00591-2258-79</NDC11Code>
<ProductNDC>0591-2258</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Scopolamine</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>SYSTEM</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20220512</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208769</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-06-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220512</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Scopolamine transdermal system is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>Scopolamine transdermal system is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.28 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The molecular formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55 to 7.81. The scopolamine transdermal system is a circular, 0.1 mm thick, 2.13 cm2 film with two layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing layer composed of a tan colored, pigmented, flexible film consisting of a polyethylene outer layer and a metalized polyester inner layer; (2) an adhesive matrix of the drug substance scopolamine, acrylic adhesive solution, isopropyl myristate, and oleyl alcohol. A release liner which protects the adhesive matrix layer during storage should be removed immediately prior to application. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-008-01</NDCCode>
<PackageDescription>1 PATCH in 1 POUCH (10019-008-01) / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0008-01</NDC11Code>
<ProductNDC>10019-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-008-04</NDCCode>
<PackageDescription>4 POUCH in 1 BOX (10019-008-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0008-04</NDC11Code>
<ProductNDC>10019-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-008-10</NDCCode>
<PackageDescription>10 POUCH in 1 BOX (10019-008-10) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0008-10</NDC11Code>
<ProductNDC>10019-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-008-24</NDCCode>
<PackageDescription>24 POUCH in 1 BOX (10019-008-24) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0008-24</NDC11Code>
<ProductNDC>10019-008</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250610</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.3 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌPtransdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, crospovidone, isopropyl palmitate, light mineral oil, and polyisobutylene; (3) an ethylene vinyl acetate copolymer membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of crospovidone, isopropyl palmitate, light mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-553-03</NDCCode>
<PackageDescription>10 POUCH in 1 BOX (10019-553-03) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0553-03</NDC11Code>
<ProductNDC>10019-553</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<EndMarketingDate>20250228</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<EndMarketingDatePackage>20250228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌP transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
<NDC>
<NDCCode>10019-553-04</NDCCode>
<PackageDescription>24 POUCH in 1 BOX (10019-553-04) / 1 PATCH in 1 POUCH / 3 d in 1 PATCH</PackageDescription>
<NDC11Code>10019-0553-04</NDC11Code>
<ProductNDC>10019-553</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Transderm Scop</ProprietaryName>
<NonProprietaryName>Scopolamine</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<EndMarketingDate>20250228</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017874</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>SCOPOLAMINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/3d</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-02-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<EndMarketingDatePackage>20250228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>TRANSDERM SCŌP is indicated in adults for the prevention of: 1 nausea and vomiting associated with motion sickness., 2 post-operative nausea and vomiting (PONV) associated with recovery from anesthesia and/or opiate analgesia and surgery.</IndicationAndUsage>
<Description>TRANSDERM SCŌP (scopolamine transdermal system) is designed for continuous release of scopolamine following application to an area of intact skin on the head, behind the ear. Each system contains 1.5 mg of scopolamine base. Scopolamine is (9-methyl-3-oxa-9-azatricyclo[3.3.1.02,4]nonan-7-yl) 3-hydroxy-2-phenylpropanoate. The empirical formula is C17H21NO4 and its structural formula is. Scopolamine has a molecular weight of 303.35 and a pKa of 7.55-7.81. The TRANSDERM SCŌP transdermal system is a circular, 0.2 mm thick, 2.5 cm2 film with four layers. Proceeding from the visible surface towards the surface attached to the skin, these layers are: (1) a backing membrane of tan-colored, aluminized, polyester film; (2) a drug layer of scopolamine, light mineral oil, and polyisobutylene; (3) a microporous polypropylene membrane that controls the rate of delivery of scopolamine from the system to the skin surface; and (4) a contact layer formulation of mineral oil, polyisobutylene, and scopolamine. A release liner of siliconized polyester, which covers the adhesive layer, is removed before the system is used. Cross section of the system.</Description>
</NDC>
</NDCList>