RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-325-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-325-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-325-09) </PackageDescription>
    <NDC11Code>63323-0325-20</NDC11Code>
    <ProductNDC>63323-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001017</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074930</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acyclovir Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.</IndicationAndUsage>
    <Description>Acyclovir Injection, USP is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Injection, USP in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir sodium is a white, crystalline powder with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-325-24</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-325-24)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-325-43) </PackageDescription>
    <NDC11Code>63323-0325-24</NDC11Code>
    <ProductNDC>63323-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001017</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074930</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acyclovir Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.</IndicationAndUsage>
    <Description>Acyclovir Injection, USP is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Injection, USP in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir sodium is a white, crystalline powder with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-325-10</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-325-10)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-325-03) </PackageDescription>
    <NDC11Code>63323-0325-10</NDC11Code>
    <ProductNDC>63323-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001017</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074930</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-11</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acyclovir Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.</IndicationAndUsage>
    <Description>Acyclovir Injection, USP is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Injection, USP in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir sodium is a white, crystalline powder with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-325-14</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-325-14)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-325-41) </PackageDescription>
    <NDC11Code>63323-0325-14</NDC11Code>
    <ProductNDC>63323-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Acyclovir</ProprietaryName>
    <NonProprietaryName>Acyclovir</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20001017</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074930</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ACYCLOVIR SODIUM</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-09-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20001017</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Acyclovir Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.</IndicationAndUsage>
    <Description>Acyclovir Injection, USP is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Injection, USP in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir sodium is a white, crystalline powder with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25.</Description>
  </NDC>
  <NDC>
    <NDCCode>52125-325-20</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (52125-325-20)</PackageDescription>
    <NDC11Code>52125-0325-20</NDC11Code>
    <ProductNDC>52125-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Indomethacin</ProprietaryName>
    <NonProprietaryName>Indomethacin</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20130513</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA018851</ApplicationNumber>
    <LabelerName>REMEDYREPACK INC.</LabelerName>
    <SubstanceName>INDOMETHACIN</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2017-02-20</LastUpdate>
    <IndicationAndUsage>Carefully consider the potential benefits and risks of indomethacin and other treatment options before deciding to use indomethacin. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS). Indomethacin has been found effective in active stages of the following. 1.Moderate to severe rheumatoid arthritis including acute flares of chronic disease. 2.Moderate to severe ankylosing spondylitis. 3.Moderate to severe osteoarthritis. 4.Acute painful shoulder (bursitis and/or tendinitis). 5.Acute gouty arthritis.</IndicationAndUsage>
    <Description>Indomethacin Capsules, USP for oral administration contain either 25 mg or 50 mg of indomethacin and the following inactive ingredients: D &amp; C Red #28, FD&amp;C Blue #1, FD&amp;C Red #3, gelatin, lactose monohydrate, magnesium stearate, povidone, pregelatinized starch, silicon dioxide, sodium lauryl sulfate, starch and titanium dioxide. Indomethacin is a non-steroidal anti-inflammatory indole derivative designated chemically as 1-(4-chlorobenzoyl)-5-methoxy-2-methyl-1H-indole-3-acetic acid. Indomethacin is practically insoluble in water and sparingly soluble in alcohol. It has a pKa of 4.5 and is stable in neutral or slightly acidic media and decomposes in strong alkali. The structural formula is. C19H16ClNO4 M.W. 357.79.</Description>
  </NDC>
  <NDC>
    <NDCCode>61314-325-20</NDCCode>
    <PackageDescription>2 SYRINGE in 1 CARTON (61314-325-20)  / .8 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>61314-0325-20</NDC11Code>
    <ProductNDC>61314-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adalimumab</ProprietaryName>
    <NonProprietaryName>Adalimumab-adaz</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20250106</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA761071</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>ADALIMUMAB</SubstanceName>
    <StrengthNumber>80</StrengthNumber>
    <StrengthUnit>mg/.8mL</StrengthUnit>
    <Pharm_Classes>Antibodies, Monoclonal [CS], Tumor Necrosis Factor Blocker [EPC], Tumor Necrosis Factor Receptor Blocking Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-01-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Adalimumab-adaz is a tumor necrosis factor blocker. Adalimumab-adaz is a recombinant human IgG1 monoclonal antibody with human derived heavy and light chain variable regions and human IgG1:k constant regions. Adalimumab-adaz is produced by recombinant DNA technology in a Chinese hamster ovary cell expression system and is purified by a process that includes specific viral inactivation and removal steps. It consists of 1330 amino acids and has a molecular weight of approximately 148 kilodaltons. Adalimumab-adaz injection is supplied as a sterile, preservative-free solution for subcutaneous administration. The drug product is supplied as either a single-dose, prefilled pen (Sensoready Pen), or as a single-dose, prefilled 1 mL glass syringe with needle guard and add-on finger flange or as a single-dose, prefilled 1 mL glass syringe. Enclosed within the Pen is a single-dose, 1 mL prefilled glass syringe. The solution of Adalimumab-adaz is clear, colorless or slightly yellowish, with a pH of about 5.2. Each 80 mg/0.8 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.8 mL (80 mg) of drug product. Each 0.8 mL of Adalimumab-adaz contains adalimumab-adaz (80 mg), adipic acid (1.75 mg), mannitol (33.6 mg), polysorbate 80 (0.32 mg), and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 40 mg/0.4 mL prefilled Sensoready Pen or prefilled syringe with BD UltraSafe PassiveTM Needle Guard delivers 0.4 mL (40 mg) of drug product. Each 0.4 mL of Adalimumab-adaz contains adalimumab-adaz (40 mg), adipic acid (0.88 mg), mannitol (16.8 mg), polysorbate 80 (0.16 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 20 mg/0.2 mL prefilled syringe delivers 0.2 mL (20 mg) of drug product. Each 0.2 mL of Adalimumab-adaz contains adalimumab-adaz (20 mg), adipic acid (0.44 mg), mannitol (8.4 mg), polysorbate 80 (0.08 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH. Each 10 mg/0.1 mL prefilled syringe delivers 0.1 mL (10 mg) of drug product. Each 0.1 mL of Adalimumab-adaz contains adalimumab-adaz (10 mg), adipic acid (0.22 mg), mannitol (4.2 mg), polysorbate 80 (0.04 mg) and Water for Injection, USP. Hydrochloric acid and sodium hydroxide are added as necessary to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-325-20</NDCCode>
    <PackageDescription>20 CAPSULE, LIQUID FILLED in 1 BOTTLE (61919-325-20)</PackageDescription>
    <NDC11Code>61919-0325-20</NDC11Code>
    <ProductNDC>61919-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Benzonatate</ProprietaryName>
    <NonProprietaryName>Benzonatate</NonProprietaryName>
    <DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20150101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040682</ApplicationNumber>
    <LabelerName>DirectRX</LabelerName>
    <SubstanceName>BENZONATATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Tracheobronchial Stretch Receptor Activity [PE],Non-narcotic Antitussive [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
    <IndicationAndUsage>Benzonatate is indicated for the symptomatic relief of cough.</IndicationAndUsage>
    <Description>Benzonatate, a non-narcotic antitussive agent, is 2, 5, 8, 11, 14, 17, 20, 23, 26-nonaoxaoctacosan-28-yl p-(butylamino) benzoate; with a molecular weight of 603.7. 66cb91e7-figure-01. Benzonatate Capsules, USP contain 100 mg or 200 mg of benzonatate, USP. Benzonatate Capsules also contain: D&amp;C Yellow No. 10, gelatin, glycerin, methylparaben sodium and propylparaben sodium.</Description>
  </NDC>
  <NDC>
    <NDCCode>63187-325-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (63187-325-20) </PackageDescription>
    <NDC11Code>63187-0325-20</NDC11Code>
    <ProductNDC>63187-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin</ProprietaryName>
    <NonProprietaryName>Amoxicillin</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20051109</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065256</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>AMOXICILLIN</SubstanceName>
    <StrengthNumber>875</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-06-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150601</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin tablets, USP and other antibacterial drugs, amoxicillin tablets, USP should be used only to treat infections that are proven or strongly suspected to be caused by bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin tablets, USP are indicated in the treatment of infections due to susceptible (ONLY β-lactamase–negative) isolates of the designated bacteria in the conditions listed below:.</IndicationAndUsage>
    <Description>Formulation of amoxicillin tablets, USP contains amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2S,5R,6R)-6-[(R)-(-)-2-amino-2-(p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C16H19N3O5S●3H2O, and the molecular weight is 419.45.Each film coated tablet contains 500 mg or 875 mg amoxicillin as the trihydrate. The 500 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and “66” on the other side. The 875 mg pink colored, capsule shaped, film coated tablets debossed with “A” on one side and with a score line in between “6” and “7” on the other side. Inactive ingredients: Colloidal silicon dioxide, crospovidone, D&amp;C Red No. 30 aluminum lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, sodium starch glycolate, and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>69452-325-20</NDCCode>
    <PackageDescription>100 TABLET, FILM COATED in 1 BOTTLE (69452-325-20) </PackageDescription>
    <NDC11Code>69452-0325-20</NDC11Code>
    <ProductNDC>69452-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cimetidine</ProprietaryName>
    <NonProprietaryName>Cimetidine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20250301</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA218220</ApplicationNumber>
    <LabelerName>Bionpharma Inc.</LabelerName>
    <SubstanceName>CIMETIDINE</SubstanceName>
    <StrengthNumber>400</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-03-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250301</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cimetidine tablets are indicated in. 1. Short-term treatment of active duodenal ulcer.Most patients heal within 4 weeks and there is rarely reason to use cimetidine tablets at full dosage for longer than 6 weeks to 8 weeks (see DOSAGE AND ADMINISTRATION: Duodenal Ulcer). Concomitant antacids should be given as needed for relief of pain. However, simultaneous administration of cimetidine tablets and antacids is not recommended, since antacids have been reported to interfere with the absorption of cimetidine. 2. Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of active ulcer.Patients have been maintained on continued treatment with cimetidine tablets 400 mg at bedtime for periods of up to 5 years. 3. Short-term treatment of active benign gastric ulcer.There is no information concerning usefulness of treatment periods of longer than 8 weeks. 4. Erosive gastroesophageal reflux (GERD).Erosive esophagitis diagnosed by endoscopy. Treatment is indicated for 12 weeks for healing of lesions and control of symptoms. The use of cimetidine tablets beyond 12 weeks has not been established (see DOSAGE AND ADMINISTRATION: GERD). 5. The treatment of pathological hypersecretory conditions(i.e., Zollinger-Ellison Syndrome, systemic mastocytosis, multiple endocrine adenomas).</IndicationAndUsage>
    <Description>Cimetidine is a histamine H 2-receptor antagonist. Chemically it is N"-cyano- N-methyl- N'-[2-[[(5-methyl-1 H-imidazol-4-yl)methyl]thio]-ethyl]guanidine. Its structural formula is:. Cimetidine contains an imidazole ring, and is chemically related to histamine. Cimetidine, USP is a white to off-white, crystalline powder.</Description>
  </NDC>
  <NDC>
    <NDCCode>70934-325-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (70934-325-20) </PackageDescription>
    <NDC11Code>70934-0325-20</NDC11Code>
    <ProductNDC>70934-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline</ProprietaryName>
    <NonProprietaryName>Doxycycline</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20190325</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209582</ApplicationNumber>
    <LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
    <SubstanceName>DOXYCYCLINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190325</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of doxycycline tablets and other antibacterial drugs, doxycycline tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to empiric selection of therapy. Doxycycline is indicated for the treatment of the following infections. Rocky Mountain spotted fever, typhus fever and the typhus group, Q fever, rickettsialpox, and tick fevers caused by Rickettsiae. Respiratory tract infections caused by Mycoplasma pneumoniae. Lymphogranuloma venereum caused by Chlamydia trachomatis. Psittacosis (ornithosis) caused by Chlamydophila psittaci. Trachoma caused by Chlamydia trachomatis, although the infectious agent is not always eliminated as judged by immunofluorescence. Inclusion conjunctivitis caused by Chlamydia trachomatis. Uncomplicated urethral, endocervical or rectal infections in adults caused by Chlamydia trachomatis. Nongonococcal urethritis caused by Ureaplasma urealyticum. Relapsing fever due to Borrelia recurrentis. Doxycycline is also indicated for the treatment of infections caused by the following gram-negative microorganisms. Chancroid caused by Haemophilus ducreyi. Plague due to Yersinia pestis. Tularemia due to Francisella tularensis. Cholera caused by Vibrio cholerae. Campylobacter fetus infections caused by Campylobacter fetus. Brucellosis due to Brucella species (in conjunction with streptomycin). Bartonellosis due to Bartonella bacilliformis. Granuloma inguinale caused by Klebsiella granulomatis. Because many strains of the following groups of microorganisms have been shown to be resistant to doxycycline, culture and susceptibility testing are recommended. Doxycycline is indicated for treatment of infections caused by the following gram-negative microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Escherichia coli. Enterobacter aerogenes. Shigella species. Acinetobacter species. Respiratory tract infections caused by Haemophilus influenzae. Respiratory tract and urinary tract infections caused by Klebsiella species. Doxycycline tablet is indicated for treatment of infections caused by the following gram-positive microorganisms, when bacteriologic testing indicates appropriate susceptibility to the drug. Upper respiratory infections caused by Streptococcus pneumoniae. Anthrax due to Bacillus anthracis, including inhalational anthrax (post-exposure): to reduce the incidence or progression of disease following exposure to aerosolized Bacillus anthracis. When penicillin is contraindicated, doxycycline is an alternative drug in the treatment of the following infections. Uncomplicated gonorrhea caused by Neisseria gonorrhoeae. Syphilis caused by Treponema pallidum. Yaws caused by Treponema pallidum subspecies pertenue. Listeriosis due to Listeria monocytogenes. Vincent's infection caused by Fusobacterium fusiforme. Actinomycosis caused by Actinomyces israelii. Infections caused by Clostridium species. In acute intestinal amebiasis, doxycycline may be a useful adjunct to amebicides. In severe acne, doxycycline may be useful adjunctive therapy.</IndicationAndUsage>
    <Description>Doxycycline is a broad-spectrum antibacterial synthetically derived from oxytetracycline. Doxycycline tablets USP, 50 mg, 75 mg, 100 mg and 150 mg contain doxycycline monohydrate equivalent to 50 mg, 75 mg, 100 mg or 150 mg of doxycycline, USP for oral administration. Doxycycline, USP is light yellow to pale yellow powder, very slightly soluble in alcohol and water; practically insoluble in ether. It dissolves in dilute solutions of mineral acids and in solutions of alkali hydroxides and carbonates. Its molecular weight is 462.45. The chemical designation of doxycycline is alpha-6-deoxy-5-oxytetracycline. Structural formula. C 22H 24N 2O 8H 2O                                               M.W. = 462.45. Doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. Inactive ingredients are as follows: colloidal silicon dioxide, crospovidone, hydroxyl propyl methylcellulose, magnesium stearate and microcrystalline cellulose, titanium dioxide. In addition. 50 mg tablets contain: D&amp;C yellow#10 aluminum lake, FD&amp;C blue#2, iron oxide yellow, polyethylene glycol and polysorbate 80. 75 mg tablets contain: iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. 100 mg tablets contain: D&amp;C yellow#10 aluminum lake, FD&amp;C red#40, iron oxide yellow, polyethylene glycol, polysorbate 80. 150 mg tablets contain: D&amp;C yellow#10 aluminum lake, iron oxide red, iron oxide yellow, lactose monohydrate, triethyl citrate. USP Dissolution test pending.</Description>
  </NDC>
  <NDC>
    <NDCCode>76420-325-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE (76420-325-20) </PackageDescription>
    <NDC11Code>76420-0325-20</NDC11Code>
    <ProductNDC>76420-325</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Meloxicam</ProprietaryName>
    <NonProprietaryName>Meloxicam</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20060719</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077929</ApplicationNumber>
    <LabelerName>Asclemed USA, Inc.</LabelerName>
    <SubstanceName>MELOXICAM</SubstanceName>
    <StrengthNumber>7.5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250502</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Meloxicam is a non-steroidal anti-inflammatory drug indicated for: 1 Osteoarthritis (OA) (1.1), 2 Rheumatoid Arthritis (RA) (1.2), 3 Juvenile Rheumatoid Arthritis (JRA) in patients who weigh ≥60 kg (1.3).</IndicationAndUsage>
    <Description>Meloxicam is a nonsteroidal anti-inflammatory drug (NSAID). Each tablet contains 7.5 mg or 15 mg meloxicam, USP for oral administration. Meloxicam is chemically designated as 4-hydroxy-2-methyl- N-(5-methyl-2-thiazolyl)-2 H-1,2-benzothiazine-3-carboxamide-1,1-dioxide. The molecular weight is 351.4. Its empirical formula is C 14H 13N 3O 4S 2and it has the following structural formula:. Meloxicam is a pale yellow solid, practically insoluble in water, with higher solubility observed in strong acids and bases. It is very slightly soluble in methanol. Meloxicam has an apparent partition coefficient (log P) app= 0.1 in n-octanol/buffer pH 7.4. Meloxicam has pKa values of 1.1 and 4.2. Meloxicam is available as a tablet for oral administration containing 7.5 mg or 15 mg meloxicam, USP. The inactive ingredients in meloxicam tablets, USP include starch, microcrystalline cellulose, lactose anhydrous, colloidal silicon dioxide, sodium citrate dihydrate, magnesium stearate.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-20</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-010-20)  / 20 mL in 1 VIAL (63323-010-03) </PackageDescription>
    <NDC11Code>63323-0010-20</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-95</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-95)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-010-42) </PackageDescription>
    <NDC11Code>63323-0010-95</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-96</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-96)  / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>63323-0010-96</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.  When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.  In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns).  Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing.  The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the boxed WARNINGS.   If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing.  If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin.  Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa.  It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections.  While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use.  It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s.  Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-032-00</NDCCode>
    <PackageDescription>20 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-032-00)  / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-032-04) </PackageDescription>
    <NDC11Code>63323-0032-00</NDC11Code>
    <ProductNDC>63323-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Acetate</ProprietaryName>
    <NonProprietaryName>Sodium Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171030</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206687</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM ACETATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>meq/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium Acetate Injection, USP (4 mEq per mL) is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
    <Description>Sodium Acetate Injection, USP (4 mEq per mL) is a sterile, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains: 328 mg sodium acetate (anhydrous) which provides 4 mEq each of sodium (Na +) and acetate (CH 3COO -). The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH may have been adjusted with glacial acetic acid to 6.5 (6.0 to 7.0). The osmolar concentration is 8 mOsmol/mL (calc); specific gravity 1.1511. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na +) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP anhydrous is chemically designated as CH 3COONa, a hygroscopic powder very soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-064-20</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0064-20</NDC11Code>
    <ProductNDC>63323-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-064-29</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-29)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0064-29</NDC11Code>
    <ProductNDC>63323-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-090-20</NDCCode>
    <PackageDescription>25 VIAL, PLASTIC in 1 TRAY (63323-090-20)  &gt; 20 mL in 1 VIAL, PLASTIC (63323-090-02) </PackageDescription>
    <NDC11Code>63323-0090-20</NDC11Code>
    <ProductNDC>63323-090</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212070</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>meq/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-05-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210428</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>14.6% Sodium Chloride Injection, USP Additive Solution is indicated for parenteral restoration of sodium ion in patients with restricted oral intake. Sodium replacement is specifically indicated in patients with hyponatremia or low salt syndrome. 14.6% Sodium Chloride Additive Solution may also be added to compatible carbohydrate solutions such as dextrose in water to provide electrolytes.</IndicationAndUsage>
    <Description>14.6% Sodium Chloride Injection, USP Additive Solution is a sterile, nonpyrogenic, concentrated solution for intravenous administration ONLY AFTER DILUTION to replenish electrolytes. The preparations contain either 2.92 or 5.84 g of sodium chloride (50 or 100 mEq each of Na+ and Cl-) in Water for Injection, USP. The solution contains no bacteriostat, antimicrobial agent or added buffer; pH 4.8 (4.5 to 7.0). May contain hydrochloric acid for pH adjustment. The osmolar concentration is 5 mOsmol/mL (calc.); specific gravity is 1.10. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid material used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-095-61</NDCCode>
    <PackageDescription>20 VIAL, PLASTIC in 1 TRAY (63323-095-61)  &gt; 100 mL in 1 VIAL, PLASTIC (63323-095-02) </PackageDescription>
    <NDC11Code>63323-0095-61</NDC11Code>
    <ProductNDC>63323-095</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212070</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>meq/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>23.4% Sodium Chloride Injection, USP is indicated for use as an electrolyte replenisher in parenteral fluid therapy. It serves as an additive for total parenteral nutrition (TPN) and as an additive for carbohydrate containing I.V. fluids.</IndicationAndUsage>
    <Description>23.4% Sodium Chloride Injection, USP Additive Solution is a sterile, nonpyrogenic, concentrated solution for intravenous administration ONLY AFTER DILUTION to replenish electrolytes. The preparations contain 23.4 g of sodium chloride (400 mEq each of Na+ and Cl-) in Water for Injection, USP. The solution contains no bacteriostat, antimicrobial agent or added buffer. The additive may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 5.0 (4.5 to 7.0). The specific gravity is 1.15, and the osmolarity is 8008 mOsmol/L (calc). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The molecular weight is 58.44 g/mol. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-117-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-01) </PackageDescription>
    <NDC11Code>63323-0117-20</NDC11Code>
    <ProductNDC>63323-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040279</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.</IndicationAndUsage>
    <Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2               M.W. 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-117-28</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-28)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-41) </PackageDescription>
    <NDC11Code>63323-0117-28</NDC11Code>
    <ProductNDC>63323-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20000712</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040279</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000712</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.  Adenocarcinoma of the Colon and Rectum.  Adenocarcinoma of the Breast.  Gastric Adenocarcinoma.  Pancreatic Adenocarcinoma.</IndicationAndUsage>
    <Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2                 M.W. 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-120-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-120-20)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0120-20</NDC11Code>
    <ProductNDC>63323-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cytarabine</ProprietaryName>
    <NonProprietaryName>Cytarabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076512</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CYTARABINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
    <Description>Cytarabine Injection, an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 100 mg cytarabine USP, in 2 g/20 mL (100 mg/mL) single dose vial and the following inactive ingredients: water for injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.7. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is. C 9H 13N 3O 5 M.W. 243.22                                       M.W. 243.22. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-128-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-128-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-128-00) </PackageDescription>
    <NDC11Code>63323-0128-20</NDC11Code>
    <ProductNDC>63323-128</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dacarbazine</ProprietaryName>
    <NonProprietaryName>Dacarbazine</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20010907</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075371</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DACARBAZINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010907</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dacarbazine for Injection is indicated in the treatment of metastatic malignant melanoma.  In addition, Dacarbazine for Injection is also indicated for Hodgkin’s disease as a second-line therapy when used in combination with other effective agents.</IndicationAndUsage>
    <Description>Dacarbazine for Injection, USP is a white to pale yellow colored solid which is light sensitive.  Each vial contains 100 mg of dacarbazine, or 200 mg of dacarbazine (the active ingredient), citric acid and mannitol.  Dacarbazine for Injection, USP is reconstituted and administered intravenously (pH 3-4).  Dacarbazine for Injection, USP is an anticancer agent.  Chemically, dacarbazine is 5-(3,3-Dimethyl-1-triazeno) imidazole-4-carboxamide with the following structural formula. M.W. 182.19                                            C 6H 10N 6O.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-137-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (63323-137-20)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0137-20</NDC11Code>
    <ProductNDC>63323-137</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bleomycin</ProprietaryName>
    <NonProprietaryName>Bleomycin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065185</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BLEOMYCIN SULFATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[USP'U]/1</StrengthUnit>
    <Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bleomycin for Injection, USP should be considered a palliative treatment.  It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents:. Squamous Cell Carcinoma: Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva.  The response to Bleomycin for Injection is poorer in patients with previously irradiated head and neck cancer. Lymphomas: Hodgkin’s disease, non-Hodgkin’s lymphoma. Testicular Carcinoma: Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin for Injection, USP has also been shown to be useful in the management of. Malignant Pleural Effusion: Bleomycin for Injection is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.</IndicationAndUsage>
    <Description>Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus.  It is freely soluble in water. Bleomycin for Injection, USP is provided as a sterile lyophilized powder for reconstitution containing 15 units per vial and 30 units per vial, which are intended for intramuscular, intravenous, subcutaneous or intrapleural administration. Its chemical name is N’-[3-(dimethylsulphonio)propyl]bleomycin-amide (bleomycin A 2) and N’-[4-(guaniodobutyl)]bleomycin-amide (bleomycin B 2). (Main component:  Bleomycin A 2, in which R is [CH 3] 2S +CH 2CH 2CH 2-). Note: A unit of bleomycin is equal to the formerly used milligram activity.  The term milligram activity is a misnomer and was changed to units to be more precise.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-143-97</NDCCode>
    <PackageDescription>20 AMPULE in 1 CARTON (63323-143-97)  &gt; 10 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>63323-0143-97</NDC11Code>
    <ProductNDC>63323-143</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Addamel N</ProprietaryName>
    <NonProprietaryName>Chromium, Copper, Iron, Manganese, Iodine, Fluorine, Molybdenum, Selenium, And Zinc</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130507</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHROMIC CHLORIDE; CUPROUS CHLORIDE; FERRIC CHLORIDE; MANGANESE CHLORIDE; POTASSIUM IODIDE; SODIUM FLUORIDE; SODIUM MOLYBDATE DIHYDRATE; SODIUM SELENITE; ZINC CHLORIDE</SubstanceName>
    <StrengthNumber>1; .13; .11; .027; .013; .095; 1.9; 3.2; .65</StrengthNumber>
    <StrengthUnit>ug/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; ug/mL; ug/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Iron [CS],Parenteral Iron Replacement [EPC],Phosphate Binder [EPC],Phosphate Chelating Activity [MoA],Magnetic Resonance Contrast Activity [MoA],Paramagnetic Contrast Agent [EPC],Copper Absorption Inhibitor [EPC],Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-02-01</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-164-75</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (63323-164-75)  / 500 mL in 1 BAG (63323-164-25) </PackageDescription>
    <NDC11Code>63323-0164-75</NDC11Code>
    <ProductNDC>63323-164</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactated Ringers</ProprietaryName>
    <NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190128</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209338</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
    <StrengthNumber>600; 310; 30; 20</StrengthNumber>
    <StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lactated Ringer's Injection is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
    <Description>Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-174-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-174-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0174-20</NDC11Code>
    <ProductNDC>63323-174</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ifosfamide</ProprietaryName>
    <NonProprietaryName>Ifosfamide</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20090930</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090181</ApplicationNumber>
    <LabelerName>APP Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>IFOSFAMIDE</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Alkylating Activity [MoA],Alkylating Drug [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-05-30</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-185-20</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-185-20)  &gt; 20 mL in 1 VIAL (63323-185-08) </PackageDescription>
    <NDC11Code>63323-0185-20</NDC11Code>
    <ProductNDC>63323-185</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sterile Water</ProprietaryName>
    <NonProprietaryName>Water</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20000905</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088400</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>WATER</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mL/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2022-06-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000905</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
    <Description>This preparation is designed solely for parenteral use only after addition to drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sterile Water for Injection, USP is a sterile, nonpyrogenic preparation of water for injection which contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single dose containers to dilute or dissolve drugs for injection.  For IV injection, add sufficient amount to a solute to make an approximately isotonic solution. pH 5.0 to 7.0. Water for Injection, USP is chemically designated H 2O.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-186-20</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-186-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-186-03) </PackageDescription>
    <NDC11Code>63323-0186-20</NDC11Code>
    <ProductNDC>63323-186</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA088912</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>9</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>This parenteral preparation is indicated only for diluting or dissolving drugs for intravenous, intramuscular, or subcutaneous injection, according to instructions of the manufacturer of the drug to be administered.</IndicationAndUsage>
    <Description>This preparation is designed solely for parenteral use only after addition of drugs that require dilution or must be dissolved in an aqueous vehicle prior to injection. Sodium Chloride Injection, USP, 0.9% is a sterile, nonpyrogenic solution. The osmolarity is 0.300 mOsmol/mL (calculated). Each mL contains: Sodium chloride 9 mg; Water for Injection q.s. It contains no bacteriostat, antimicrobial agent or added buffer and is supplied only in single dose containers. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (pH 4.5-7.0). Sodium chloride occurs as colorless cubic crystals or white crystalline powder and has a saline taste. Sodium chloride is freely soluble in water. It is soluble in glycerin and slightly soluble in alcohol. The empirical formula for sodium chloride is NaCl and the molecular weight is 58.44.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-194-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (63323-194-20)  &gt; 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0194-20</NDC11Code>
    <ProductNDC>63323-194</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20090811</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065440</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC],Anthracyclines [CS],Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090811</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
</NDCList>