RESTful Lookup — Test-Drive (2007 – 2026)

{
  "NDC": [
    {
      "NDCCode": "63323-398-14",
      "PackageDescription": "10 VIAL in 1 TRAY (63323-398-14)  / 5 mL in 1 VIAL (63323-398-41) ",
      "NDC11Code": "63323-0398-14",
      "ProductNDC": "63323-398",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Azithromycin",
      "NonProprietaryName": "Azithromycin Monohydrate",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060320",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065179",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "AZITHROMYCIN MONOHYDRATE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/5mL",
      "Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
      "Status": "Active",
      "LastUpdate": "2024-10-18",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20060320",
      "SamplePackage": "N",
      "IndicationAndUsage": "Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
      "Description": "Azithromycin for injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38 H 72 N 2 O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate or dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O or C 38H 72N 2O 122H 2O and a molecular weight of 767.00 or 785.02 respectively. Azithromycin for injection, USP consists of azithromycin monohydrate or dihydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for injection, USP is supplied in lyophilized form in a 10 mL vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate or dihydrate equivalent to 100 mg of azithromycin."
    },
    {
      "NDCCode": "63323-398-10",
      "PackageDescription": "10 VIAL in 1 TRAY (63323-398-10)  / 5 mL in 1 VIAL (63323-398-01) ",
      "NDC11Code": "63323-0398-10",
      "ProductNDC": "63323-398",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Azithromycin",
      "NonProprietaryName": "Azithromycin Monohydrate",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060320",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065179",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "AZITHROMYCIN MONOHYDRATE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/5mL",
      "Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
      "Status": "Active",
      "LastUpdate": "2024-10-18",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20060320",
      "SamplePackage": "N",
      "IndicationAndUsage": "Azithromycin for injection is a macrolide antibacterial drug indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.",
      "Description": "Azithromycin for injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibacterial drug, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D- xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C 38 H 72 N 2 O 12, and its molecular weight is 749.00. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate or dihydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O or C 38H 72N 2O 122H 2O and a molecular weight of 767.00 or 785.02 respectively. Azithromycin for injection, USP consists of azithromycin monohydrate or dihydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for injection, USP is supplied in lyophilized form in a 10 mL vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate or dihydrate equivalent to 100 mg of azithromycin."
    },
    {
      "NDCCode": "63323-398-12",
      "PackageDescription": "10 VIAL in 1 TRAY (63323-398-12)  / 5 mL in 1 VIAL",
      "NDC11Code": "63323-0398-12",
      "ProductNDC": "63323-398",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Azithromycin",
      "NonProprietaryName": "Azithromycin Monohydrate",
      "DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20060320",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA065179",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "AZITHROMYCIN MONOHYDRATE",
      "StrengthNumber": "500",
      "StrengthUnit": "mg/5mL",
      "Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
      "Status": "Deprecated",
      "LastUpdate": "2026-05-28",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20060320",
      "SamplePackage": "N",
      "IndicationAndUsage": "Azithromycin for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below.   As recommended dosages, durations of therapy, and applicable patient populations vary among these infections, please see DOSAGE AND ADMINISTRATION for dosing recommendations. Community-acquired pneumonia due to Chlamydia pneumoniae, Haemophilus influenzae, Legionella pneumophila, Moraxella catarrhalis, Mycoplasma pneumoniae, Staphylococcus aureus, or Streptococcus pneumoniae in patients who require initial intravenous therapy. Pelvic inflammatory disease due to Chlamydia trachomatis, Neisseria gonorrhoeae, or Mycoplasma hominis in patients who require initial intravenous therapy.  If anaerobic microorganisms are suspected of contributing to the infection, an antimicrobial agent with anaerobic activity should be administered in combination with Azithromycin for Injection, USP. Azithromycin for Injection, USP should be followed by azithromycin by the oral route as required (see DOSAGE AND ADMINISTRATION). Appropriate culture and susceptibility tests should be performed before treatment to determine the causative microorganism and its susceptibility to azithromycin.  Therapy with azithromycin may be initiated before results of these tests are known; once the results become available, antimicrobial therapy should be adjusted accordingly. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Azithromycin for Injection, USP and other antibacterial drugs, Azithromycin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.  When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.  In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
      "Description": "Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibiotics, for intravenous injection.  Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L- ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one.  Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring.  Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O and a molecular weight of 767.00. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide.  Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL vial equivalent to 500 mg of azithromycin for intravenous administration.  Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin.  After reconstitution each mL contains: azithromycin monohydrate equivalent to 100 mg of azithromycin, 76.9 mg of citric acid, and sodium hydroxide for pH adjustment."
    },
    {
      "NDCCode": "21130-398-27",
      "PackageDescription": "2 BOTTLE in 1 CARTON (21130-398-27)  > 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
      "NDC11Code": "21130-0398-27",
      "ProductNDC": "21130-398",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Omeprazole Magnesium",
      "NonProprietaryName": "Omeprazole Magnesium",
      "DosageFormName": "CAPSULE, DELAYED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160201",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078878",
      "LabelerName": "Albertsons Companies",
      "SubstanceName": "OMEPRAZOLE MAGNESIUM",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/1",
      "Status": "Deprecated",
      "LastUpdate": "2019-02-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20191231"
    },
    {
      "NDCCode": "21130-398-33",
      "PackageDescription": "3 BOTTLE in 1 CARTON (21130-398-33)  / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
      "NDC11Code": "21130-0398-33",
      "ProductNDC": "21130-398",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Omeprazole Magnesium",
      "NonProprietaryName": "Omeprazole Magnesium",
      "DosageFormName": "CAPSULE, DELAYED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160201",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078878",
      "LabelerName": "Albertsons Companies",
      "SubstanceName": "OMEPRAZOLE MAGNESIUM",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-07-25",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160201",
      "SamplePackage": "N",
      "IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
    },
    {
      "NDCCode": "21130-398-52",
      "PackageDescription": "1 BOTTLE in 1 CARTON (21130-398-52)  / 14 CAPSULE, DELAYED RELEASE in 1 BOTTLE",
      "NDC11Code": "21130-0398-52",
      "ProductNDC": "21130-398",
      "ProductTypeName": "HUMAN OTC DRUG",
      "ProprietaryName": "Omeprazole Magnesium",
      "NonProprietaryName": "Omeprazole Magnesium",
      "DosageFormName": "CAPSULE, DELAYED RELEASE",
      "RouteName": "ORAL",
      "StartMarketingDate": "20160201",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA078878",
      "LabelerName": "Albertsons Companies",
      "SubstanceName": "OMEPRAZOLE MAGNESIUM",
      "StrengthNumber": "20",
      "StrengthUnit": "mg/1",
      "Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
      "Status": "Active",
      "LastUpdate": "2025-07-25",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20160201",
      "SamplePackage": "N",
      "IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
    },
    {
      "NDCCode": "63323-162-14",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-162-14)  > 2 mL in 1 VIAL, SINGLE-DOSE (63323-162-25) ",
      "NDC11Code": "63323-0162-14",
      "ProductNDC": "63323-162",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Ketorolac Tromethamine",
      "NonProprietaryName": "Ketorolac Tromethamine",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR",
      "StartMarketingDate": "20001018",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA075784",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "KETOROLAC TROMETHAMINE",
      "StrengthNumber": "30",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
      "Status": "Active",
      "LastUpdate": "2022-12-09",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20001018",
      "SamplePackage": "N",
      "IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).",
      "Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti- inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 0.1% citric acid, 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
    },
    {
      "NDCCode": "63323-325-14",
      "PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (63323-325-14)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-325-41) ",
      "NDC11Code": "63323-0325-14",
      "ProductNDC": "63323-325",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Acyclovir",
      "NonProprietaryName": "Acyclovir",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20001017",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA074930",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "ACYCLOVIR SODIUM",
      "StrengthNumber": "50",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
      "Status": "Active",
      "LastUpdate": "2024-09-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20001017",
      "SamplePackage": "N",
      "IndicationAndUsage": "Acyclovir Injection is indicated for the treatment of initial and recurrent mucosal and cutaneous herpes simplex (HSV-1 and HSV-2) in immunocompromised patients.",
      "Description": "Acyclovir Injection, USP is a synthetic nucleoside analog, active against herpes viruses. It is a sterile, aqueous solution for intravenous infusion, containing 50 mg acyclovir per mL in Water for Injection, USP. The concentration is equivalent to 54.9 mg of acyclovir sodium per mL in Water for Injection, USP. The sodium content is approximately 5.1 mg/mL. The pH range of the solution is 10.85 to 11.50. Further dilution of Acyclovir Injection, USP in an appropriate intravenous solution must be performed before infusion (see DOSAGE AND ADMINISTRATION, Administration). The chemical name of acyclovir sodium is 9-[(2-Hydroxyethoxy)methyl] guanine, and has the following structural formula:. Acyclovir sodium is a white, crystalline powder with the molecular formula C8H10N5NaO3 and a molecular weight of 247.19. The maximum solubility in water at 25°C exceeds 100 mg/mL. At physiologic pH, acyclovir sodium exists as the unionized form with a molecular weight of 225 and a maximum solubility in water at 37°C of 2.5 mg/mL. The pka's of acyclovir are 2.27 and 9.25."
    },
    {
      "NDCCode": "63323-459-14",
      "PackageDescription": "25 VIAL, MULTI-DOSE in 1 TRAY (63323-459-14)  > 4 mL in 1 VIAL, MULTI-DOSE (63323-459-04) ",
      "NDC11Code": "63323-0459-14",
      "ProductNDC": "63323-459",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Heparin Sodium",
      "NonProprietaryName": "Heparin Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS; SUBCUTANEOUS",
      "StartMarketingDate": "20191104",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA017029",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "HEPARIN SODIUM",
      "StrengthNumber": "10000",
      "StrengthUnit": "[USP'U]/mL",
      "Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2025-12-18",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20191104",
      "SamplePackage": "N",
      "IndicationAndUsage": "Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
      "Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits):."
    },
    {
      "NDCCode": "63323-542-14",
      "PackageDescription": "25 VIAL in 1 TRAY (63323-542-14)  / 5 mL in 1 VIAL (63323-542-04) ",
      "NDC11Code": "63323-0542-14",
      "ProductNDC": "63323-542",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Heparin Sodium",
      "NonProprietaryName": "Heparin Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS; SUBCUTANEOUS",
      "StartMarketingDate": "20191104",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA017029",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "HEPARIN SODIUM",
      "StrengthNumber": "10000",
      "StrengthUnit": "[USP'U]/mL",
      "Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-05-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20191104",
      "SamplePackage": "N",
      "IndicationAndUsage": "Heparin Sodium Injection is indicated for: : 1 Prophylaxis and treatment of venous thrombosis and pulmonary embolism; , 2 Prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease; , 3 Atrial fibrillation with embolization; , 4 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 5 Prevention of clotting in arterial and cardiac surgery; , 6 Prophylaxis and treatment of peripheral arterial embolism. , 7 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
      "Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) β-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits):."
    },
    {
      "NDCCode": "63323-661-14",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-661-14)  / 10 mL in 1 VIAL, SINGLE-DOSE (63323-661-04) ",
      "NDC11Code": "63323-0661-14",
      "ProductNDC": "63323-661",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Esmolol Hydrochloride",
      "NonProprietaryName": "Esmolol Hydrochloride",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20041130",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA076573",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "ESMOLOL HYDROCHLORIDE",
      "StrengthNumber": "10",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
      "Status": "Active",
      "LastUpdate": "2025-01-14",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20250113",
      "SamplePackage": "N"
    },
    {
      "NDCCode": "63323-714-14",
      "PackageDescription": "1440 mL in 1 BAG (63323-714-14) ",
      "NDC11Code": "63323-0714-14",
      "ProductNDC": "63323-714",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Perikabiven",
      "NonProprietaryName": "Dextrose, Soybean Oil, Electrolytes, Lysine, Phenylalanine, Leucine, Valine, Threonine, Methionine, Isoleucine, Tryptophan, Alanine, Arginine, Glycine, Proline, Histidine, Glutamic Acid, Serine, Aspartic Acid And Tyrosine",
      "DosageFormName": "INJECTION, EMULSION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20140825",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA200656",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "DEXTROSE MONOHYDRATE; SOYBEAN OIL; SODIUM ACETATE; POTASSIUM CHLORIDE; SODIUM GLYCEROPHOSPHATE ANHYDROUS; MAGNESIUM SULFATE HEPTAHYDRATE; CALCIUM CHLORIDE; LYSINE HYDROCHLORIDE; PHENYLALANINE; LEUCINE; VALINE; HISTIDINE; THREONINE; METHIONINE; ISOLEUCINE; TRYPTOPHAN; ALANINE; ARGININE; GLYCINE; PROLINE; GLUTAMIC ACID; SERINE; ASPARTIC ACID; TYROSINE",
      "StrengthNumber": "7.5; 3.5; 170; 124; 105; 68; 20; 187; 164; 164; 152; 141; 116; 116; 116; 40; 333; 235; 164; 141; 116; 94; 71; 4.8",
      "StrengthUnit": "g/100mL; g/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL",
      "Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Lipid Emulsion [EPC], Lipids [CS], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
      "Status": "Active",
      "LastUpdate": "2025-10-07",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20140825",
      "SamplePackage": "N",
      "IndicationAndUsage": "PERIKABIVEN is indicated as a source of calories, protein, electrolytes and essential fatty acids for adult patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. PERIKABIVEN may be used to prevent essential fatty acid deficiency or treat negative nitrogen balance in adult patients.",
      "Description": "PERIKABIVEN is a sterile, hypertonic emulsion, for peripheral or central venous administration, in a Three Chamber Bag. The product contains no added sulfites. Chamber 1 contains Dextrose monohydrate solution for fluid replenishment and caloric supply. Chamber 2 contains the Amino Acid solution with Electrolytes, which comprises essential and nonessential amino acids provided with electrolytes. Chamber 3 contains Intralipid® 20% (a 20% Lipid Injectable Emulsion), prepared for intravenous administration as a source of calories and essential fatty acids. See below for formulations of each chamber and Table 2 for strength, pH, osmolarity, ionic concentration and caloric content of PERIKABIVEN when all the chambers are mixed together. Chamber 1: Contains sterile, hypertonic solution of Dextrose, USP in water for injection with a pH range of 3.5 to 5.5. Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6  H2O) and has the following structure:. Dextrose is derived from corn. Chamber 2: Contains a sterile solution of amino acids and electrolytes in water for injection. In addition, glacial acetic acid has been added to adjust the pH so that the final solution pH is 5.4 to 5.8. The formulas for the individual electrolytes and amino acids are as follows:. Chamber 3: Contains a 20% Lipid Injectable Emulsion (Intralipid® 20%) which is made up of 20% Soybean Oil, 1.2% Egg Yolk Phospholipids, 2.25% Glycerin, and water for injection. In addition, sodium hydroxide has been added to adjust the pH. The final product pH range is 6 to 9. The soybean oil is a refined natural product consisting of a mixture of neutral triglycerides of predominantly unsaturated fatty acids with the following structure:. where are saturated and unsaturated fatty acid residues. The major component fatty acids are linoleic (48 to 58 %), oleic (17 to 30%), palmitic (9 to 13%), linolenic (5 to 11%) and stearic acid (2.5 to 5%). These fatty acids have the following chemical and structural formulas:. Purified egg phosphatides are a mixture of naturally occurring phospholipids which are isolated from the egg yolk. These phospholipids have the following general structure:. contain saturated and unsaturated fatty acids that abound in neutral fats. R3 is primarily either the choline or ethanolamine ester of phosphoric acid. Glycerin is chemically designated C3H8O3 and is a clear colorless, hygroscopic syrupy liquid. It has the following structural formula:. The container-solution unit is a closed system and is not dependent upon entry of external air during administration. The container is overwrapped to provide protection from the physical environment and to provide an additional oxygen and moisture barrier when necessary. An oxygen absorber is placed between the inner bag and the overpouch. The container is not made with natural rubber latex or polyvinyl chloride (PVC). PERIKABIVEN contains no more than 25 mcg/L of aluminum."
    },
    {
      "NDCCode": "63323-806-20",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-806-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-806-14) ",
      "NDC11Code": "63323-0806-20",
      "ProductNDC": "63323-806",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Fentanyl Citrate",
      "NonProprietaryName": "Fentanyl Citrate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20190503",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA210762",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "FENTANYL CITRATE",
      "StrengthNumber": ".05",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
      "DEASchedule": "CII",
      "Status": "Active",
      "LastUpdate": "2025-02-04",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20190503",
      "SamplePackage": "N",
      "IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: : 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises. , 2 use as a narcotic analgesic supplement in general or regional anesthesia. , 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia. , 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures. .",
      "Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl) propionanilide citrate (1:1) with the following structural formula:. C22H28N2O  C6H8O7          Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 to 7.5. Contains no preservative."
    },
    {
      "NDCCode": "63323-885-14",
      "PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (63323-885-14)  > 5 mL in 1 VIAL, SINGLE-DOSE",
      "NDC11Code": "63323-0885-14",
      "ProductNDC": "63323-885",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Levothyroxine Sodium",
      "NonProprietaryName": "Levothyroxine Sodium",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAVENOUS",
      "StartMarketingDate": "20180529",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA210632",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "LEVOTHYROXINE SODIUM",
      "StrengthNumber": "20",
      "StrengthUnit": "ug/mL",
      "Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
      "Status": "Active",
      "LastUpdate": "2020-12-11",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20180529",
      "SamplePackage": "N",
      "IndicationAndUsage": "Levothyroxine Sodium Injection is indicated for the treatment of myxedema coma.",
      "Description": "Levothyroxine Sodium Injection contains synthetic crystalline levothyroxine (T4) in sodium salt form. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula:. Levothyroxine Sodium Injection is a sterile, preservative free, clear, colorless, sterile solution for intravenous administration available as: 100 mcg per 5 mL (20 mcg per mL). Each mL of Levothyroxine Sodium Injection also contains 10 mg Tromethamine, USP; 0.14 mg Sodium Iodide, USP; 6.48 mg Sodium Chloride, USP; and Water for Injection, USP Sodium hydroxide, NF and/or Hydrochloric acid, USP may have been added for pH adjustment (9.5 – 10.8). Levothyroxine Sodium Injection is in single dose clear glass vials."
    },
    {
      "NDCCode": "69677-071-02",
      "PackageDescription": "1 KIT in 1 BOX (69677-071-02)  *  .9 mL in 1 PACKET (67777-130-02)  *  .55 mL in 1 POUCH (67777-121-14)  *  1 mL in 1 VIAL (63323-506-01) ",
      "NDC11Code": "69677-0071-02",
      "ProductNDC": "69677-071",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Mas Care-pak Dexamethasone",
      "NonProprietaryName": "Dexamethasone Sodium Phosphate",
      "DosageFormName": "KIT",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS; TOPICAL",
      "StartMarketingDate": "20171101",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA040491",
      "LabelerName": "MAS Management Group Inc.",
      "Status": "Deprecated",
      "LastUpdate": "2019-09-21",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "E",
      "ListingRecordCertifiedThrough": "20181231",
      "Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
    },
    {
      "NDCCode": "70112-555-02",
      "PackageDescription": "1 KIT in 1 BOX (70112-555-02)  *  .55 mL in 1 POUCH (67777-121-14)  *  1 mL in 1 VIAL (63323-506-01)  *  .9 mL in 1 PACKET (67777-130-02) ",
      "NDC11Code": "70112-0555-02",
      "ProductNDC": "70112-555",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Topidex",
      "NonProprietaryName": "Dexamethasone Surgical Combo Kit",
      "DosageFormName": "KIT",
      "StartMarketingDate": "20180416",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA040491",
      "LabelerName": "Topicare Management, LLC",
      "Status": "Deprecated",
      "LastUpdate": "2020-01-01",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20191231",
      "StartMarketingDatePackage": "20180416",
      "SamplePackage": "N",
      "Description": "Dexamethasone Sodium Phosphate Injection, USP, is a water-soluble inorganic ester of dexamethasone which produces a rapid response even when injected intramuscularly. Dexamethasone Sodium Phosphate, USP chemically is Pregna-1,4-diene-3,20-dione, 9-fluoro- 11,17-dihydroxy-16-methyl-21-(phosphonooxy)-, disodium salt, (11ß, 16α). It occurs as a white to creamy white powder, is exceedingly hygroscopic, is soluble in water and its solutions have a pH between 7.0 and 8.5. It has the following structural formula. Each mL of Dexamethasone Sodium Phosphate Injection, USP (Preservative Free) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 24.75 mg sodium citrate, dihydrate; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5. Each mL Dexamethasone Sodium Phosphate Injection, USP (Preserved) contains dexamethasone sodium phosphate, USP equivalent to 10 mg dexamethasone phosphate; 13.5 mg sodium citrate, dihydrate; 10 mg benzyl alcohol; and Water for Injection, q.s. pH adjusted with citric acid or sodium hydroxide, if necessary. pH: 7.0 to 8.5."
    },
    {
      "NDCCode": "63323-578-01",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-578-03) ",
      "NDC11Code": "63323-0578-01",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
      "Status": "Active",
      "LastUpdate": "2023-08-26",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                    C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "63323-578-02",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-02)  / 2 mL in 1 VIAL, SINGLE-DOSE (63323-578-04) ",
      "NDC11Code": "63323-0578-02",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
      "Status": "Active",
      "LastUpdate": "2023-08-26",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                    C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "63323-578-05",
      "PackageDescription": "25 VIAL, MULTI-DOSE in 1 CARTON (63323-578-05)  / 5 mL in 1 VIAL, MULTI-DOSE (63323-578-07) ",
      "NDC11Code": "63323-0578-05",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
      "Status": "Active",
      "LastUpdate": "2023-08-26",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                    C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "63323-578-11",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-11)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-578-41) ",
      "NDC11Code": "63323-0578-11",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
      "Status": "Active",
      "LastUpdate": "2024-10-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                     C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "63323-578-12",
      "PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-12)  / 2 mL in 1 VIAL, SINGLE-DOSE (63323-578-42) ",
      "NDC11Code": "63323-0578-12",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
      "Status": "Active",
      "LastUpdate": "2024-10-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                     C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "63323-578-20",
      "PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (63323-578-20)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-578-18) ",
      "NDC11Code": "63323-0578-20",
      "ProductNDC": "63323-578",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Glycopyrrolate",
      "NonProprietaryName": "Glycopyrrolate",
      "DosageFormName": "INJECTION, SOLUTION",
      "RouteName": "INTRAMUSCULAR; INTRAVENOUS",
      "StartMarketingDate": "20171027",
      "MarketingCategoryName": "ANDA",
      "ApplicationNumber": "ANDA209328",
      "LabelerName": "Fresenius Kabi USA, LLC",
      "SubstanceName": "GLYCOPYRROLATE",
      "StrengthNumber": ".2",
      "StrengthUnit": "mg/mL",
      "Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA]",
      "Status": "Deprecated",
      "LastUpdate": "2024-01-02",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20261231",
      "StartMarketingDatePackage": "20171027",
      "EndMarketingDatePackage": "20231231",
      "SamplePackage": "N",
      "IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation.  When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias.  Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
      "Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows:                    C19H28BrNO3                    M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder.  It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0.  The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
    },
    {
      "NDCCode": "0310-4616-12",
      "PackageDescription": "120 AEROSOL, METERED in 1 INHALER (0310-4616-12) ",
      "NDC11Code": "00310-4616-12",
      "ProductNDC": "0310-4616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200723",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 9; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200723",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "0310-4616-28",
      "PackageDescription": "28 AEROSOL, METERED in 1 INHALER (0310-4616-28) ",
      "NDC11Code": "00310-4616-28",
      "ProductNDC": "0310-4616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200723",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 9; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200723",
      "SamplePackage": "Y",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "0310-4616-39",
      "PackageDescription": "28 AEROSOL, METERED in 1 INHALER (0310-4616-39) ",
      "NDC11Code": "00310-4616-39",
      "ProductNDC": "0310-4616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20200723",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 9; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20200723",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "0310-6616-01",
      "PackageDescription": "120 AEROSOL, METERED in 1 INHALER (0310-6616-01) ",
      "NDC11Code": "00310-6616-01",
      "ProductNDC": "0310-6616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260427",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 18; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260427",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "0310-6616-39",
      "PackageDescription": "28 AEROSOL, METERED in 1 INHALER (0310-6616-39) ",
      "NDC11Code": "00310-6616-39",
      "ProductNDC": "0310-6616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260427",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 18; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260427",
      "SamplePackage": "N",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "0310-6616-95",
      "PackageDescription": "28 AEROSOL, METERED in 1 INHALER (0310-6616-95) ",
      "NDC11Code": "00310-6616-95",
      "ProductNDC": "0310-6616",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Breztri",
      "NonProprietaryName": "Budesonide, Glycopyrrolate, And Formoterol Fumarate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260427",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA212122",
      "LabelerName": "AstraZeneca Pharmaceuticals LP",
      "SubstanceName": "BUDESONIDE; GLYCOPYRROLATE; FORMOTEROL",
      "StrengthNumber": "160; 18; 4.8",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Active",
      "LastUpdate": "2026-06-19",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260427",
      "SamplePackage": "Y",
      "IndicationAndUsage": "BREZTRI AEROSPHERE is a combination of budesonide, an inhaled corticosteroid (ICS); glycopyrrolate, an anticholinergic; and formoterol fumarate, a long-acting beta2-adrenergic agonist (LABA), indicated for: 1 the maintenance treatment of chronic obstructive pulmonary disease (COPD) in adult patients. (1.1), 2 the maintenance treatment of asthma in adult and pediatric patients 12 years of age and older. (1.2).",
      "Description": "BREZTRI AEROSPHERE (budesonide, glycopyrrolate and formoterol fumarate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of micronized budesonide [an inhaled corticosteroid (ICS)], micronized glycopyrrolate (an anticholinergic), and micronized formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] for oral inhalation. Budesonide is a corticosteroid with the following chemical name: (RS)-11β, 16α, 17,21-Tetrahydroxypregna-1,4-diene-3,20-dione cyclic 16,17-acetal with butyraldehyde. Budesonide is a white to off-white, powder which is practically insoluble in water. The molecular formula is C25H34O6 and the molecular weight is 430.54. The structural formula is as follows:. Budesonide contains nine chiral centers and is a mixture of the two epimers (22R and 22S). Glycopyrrolate is a quaternary ammonium salt with the following chemical name: (RS)-[3-(SR)-Hydroxy-1,1-dimethylpyrrolidinium bromide] α-cyclopentylmandelate. Glycopyrrolate is a powder that is freely soluble in water. The molecular formula is C19H28BrNO3, and the molecular weight is 398.33 g/mol. The structural formula is as follows:. Glycopyrrolate contains two chiral centers and is a racemate of a 1:1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. Formoterol fumarate has the chemical name N-[2-Hydroxy-5-[(1RS)-1-hydroxy-2-[[(1RS)-2-(4-methoxyphenyl)-1-methylethyl]-amino] ethyl]phenyl] formamide, (E)-2-butenedioate dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. The molecular formula is (C19H24N2O4)2·C4H4O4·2H2O and the molecular weight is 840.91 g/mol. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S). BREZTRI AEROSPHERE is formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized metered dose inhaler containing 28 or 120 inhalations. The canister has an attached dose indicator and is supplied with a yellow plastic actuator and white mouthpiece with a grey dust cap. After priming, each actuation of the inhaler meters 170 mcg of budesonide, 9.6 or 19.1 mcg of glycopyrrolate (equivalent to 7.7 or 15.3 mcg of glycopyrronium), and 5.1 mcg of formoterol fumarate (equivalent to 4.4 mcg of formoterol) from the valve which delivers 160 mcg of budesonide, 9.0 or 18 mcg of glycopyrrolate (equivalent to 7.2 or 14.4 mcg of glycopyrronium), and 4.8 mcg of formoterol fumarate (equivalent to 4.1 mcg of formoterol) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as the coordination between actuation of the device and inspiration through the delivery system. BREZTRI AEROSPHERE also contains porous particles that form a co-suspension with the drug crystals. The porous particles are comprised of the phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC), and calcium chloride. Porous particles and HFA 134a are excipients in the formulation."
    },
    {
      "NDCCode": "10122-120-02",
      "PackageDescription": "1 CANISTER in 1 CARTON (10122-120-02)  / 120 AEROSOL, METERED in 1 CANISTER",
      "NDC11Code": "10122-0120-02",
      "ProductNDC": "10122-120",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trimbow",
      "NonProprietaryName": "Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260514",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA219622",
      "LabelerName": "Chiesi USA, Inc.",
      "SubstanceName": "BECLOMETHASONE DIPROPIONATE; FORMOTEROL FUMARATE; GLYCOPYRROLATE",
      "StrengthNumber": "86; 4.9; 10.6",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2026-09-29",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260514",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRIMBOW is indicated for the maintenance treatment of asthma in adult patients aged 18 years and older. Limitations of Use. TRIMBOW is NOT indicated for relief of acute bronchospasm [see Warnings and Precautions (5.2)].",
      "Description": "TRIMBOW (beclomethasone dipropionate, formoterol fumarate and glycopyrrolate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of beclomethasone dipropionate [an inhaled corticosteroid (ICS)], formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] and glycopyrrolate (an anticholinergic) for oral inhalation. Beclomethasone dipropionate, an inhaled corticosteroid [ICS], has the chemical name. [2-[(8S,9R,10S,11S,13S,14S,16S,17R)-9-chloro-11-hydroxy-10,13,16-trimethyl-3-oxo-17-propanoyloxy-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] propanoate. Beclomethasone dipropionate is a white to creamy white, odorless powder, insoluble in water, freely soluble in acetone, and sparingly soluble in alcohol, with a molecular weight of 521.04218 g/mol, and the molecular formula is C28H37ClO7. The structural formula is as follows:. Formoterol fumarate, a long-acting β2 agonist has the chemical name (E)-but-2-enedioic acid; N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-formamide dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. Formoterol fumarate  has a molecular weight of 840.91 g/mol, and the molecular formula is C42H52N4O12. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S) . Glycopyrrolate is a quarternary ammonium bromide salt with the following chemical name: [RS-]-3-[(SR)-(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl-Pyrrolidinium bromide. Two asymmetric atoms of carbon are present in the molecule: Glycopyrronium bromide is represented by the (R,S)-(S,R) racemic pair of enantiomers, corresponding to the threo diastereoisomeric structure. Glycopyrrolate is a powder that is freely soluble in water. Glycopyrrolate has a molecular weight of 398.33 g/mol, and the molecular formula is C19H28BrNO3. The structural formula is as follows. Glycopyrrolate contains two chiral centers and is a racemate of a 1;1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. TRIMBOW 86 mcg/4.9 mcg/10.6 mcg and TRIMBOW 172 mcg/4.9 mcg/10.6 mcg are formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized, metered-dose inhalers, each containing 120 actuations.  The canister is supplied with a grey plastic actuator with an integrated dose counter mechanism and mouthpiece, and a red cap (TRIMBOW 86 mcg/4.9 mcg/10.6 mcg) or a green cap (TRIMBOW 172 mcg/4.9 mcg/10.6 mcg). As a solution, TRIMBOW does not need to be shaken before use. TRIMBOW should be “primed” by actuating 2 times prior to using the first dose from a new canister. If the inhaler has not been used for 30 days or longer, re-prime the inhaler [see How Supplied/Storage and Handling (16)]. After priming, each actuation meters 100 or 200 mcg of beclomethasone dipropionate, 6.0 mcg of formoterol fumarate (equivalent to 5.7 mcg of formoterol fumarate anhydrous), and 12.5 mcg of glycopyrrolate (equivalent to 10 mcg of glycopyrronium) in 73.8 mg of solution from the valve and delivers 86 or 172 mcg of beclomethasone dipropionate, 4.9 mcg of formoterol fumarate (equivalent to 4.2 mcg of formoterol fumarate anhydrous), and 10.6 mcg of glycopyrrolate (equivalent to 8.5 mcg of glycopyrronium) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as coordination of the device (metered dose inhaler [MDI]) actuation with the inhalation maneuver, inspiratory flow and peak inspiratory flow through the delivery system, which may vary in patients with asthma and other pulmonary diseases and conditions. Avoid spraying in the eyes or face while using TRIMBOW. TRIMBOW contains dehydrated alcohol (18% v/v), HFA 134a, and hydrochloric acid as excipients in the formulation."
    },
    {
      "NDCCode": "10122-121-02",
      "PackageDescription": "1 CANISTER in 1 CARTON (10122-121-02)  / 120 AEROSOL, METERED in 1 CANISTER",
      "NDC11Code": "10122-0121-02",
      "ProductNDC": "10122-121",
      "ProductTypeName": "HUMAN PRESCRIPTION DRUG",
      "ProprietaryName": "Trimbow",
      "NonProprietaryName": "Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate",
      "DosageFormName": "AEROSOL, METERED",
      "RouteName": "RESPIRATORY (INHALATION)",
      "StartMarketingDate": "20260514",
      "MarketingCategoryName": "NDA",
      "ApplicationNumber": "NDA219622",
      "LabelerName": "Chiesi USA, Inc.",
      "SubstanceName": "BECLOMETHASONE DIPROPIONATE; FORMOTEROL FUMARATE; GLYCOPYRROLATE",
      "StrengthNumber": "172; 4.9; 10.6",
      "StrengthUnit": "ug/1; ug/1; ug/1",
      "Pharm_Classes": "Adrenergic beta2-Agonists [MoA], Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA], Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC], beta2-Adrenergic Agonist [EPC]",
      "Status": "Deprecated",
      "LastUpdate": "2026-09-29",
      "PackageNdcExcludeFlag": "N",
      "ProductNdcExcludeFlag": "N",
      "ListingRecordCertifiedThrough": "20271231",
      "StartMarketingDatePackage": "20260714",
      "SamplePackage": "N",
      "IndicationAndUsage": "TRIMBOW is indicated for the maintenance treatment of asthma in adult patients aged 18 years and older. Limitations of Use. TRIMBOW is NOT indicated for relief of acute bronchospasm [see Warnings and Precautions (5.2)].",
      "Description": "TRIMBOW (beclomethasone dipropionate, formoterol fumarate and glycopyrrolate) Inhalation Aerosol is a pressurized metered-dose inhaler that delivers a combination of beclomethasone dipropionate [an inhaled corticosteroid (ICS)], formoterol fumarate [an inhaled long-acting beta2-adrenergic agonist (a LABA)] and glycopyrrolate (an anticholinergic) for oral inhalation. Beclomethasone dipropionate, an inhaled corticosteroid [ICS], has the chemical name. [2-[(8S,9R,10S,11S,13S,14S,16S,17R)-9-chloro-11-hydroxy-10,13,16-trimethyl-3-oxo-17-propanoyloxy-6,7,8,11,12,14,15,16-octahydrocyclopenta[a]phenanthren-17-yl]-2-oxoethyl] propanoate. Beclomethasone dipropionate is a white to creamy white, odorless powder, insoluble in water, freely soluble in acetone, and sparingly soluble in alcohol, with a molecular weight of 521.04218 g/mol, and the molecular formula is C28H37ClO7. The structural formula is as follows:. Formoterol fumarate, a long-acting β2 agonist has the chemical name (E)-but-2-enedioic acid; N-[2-hydroxy-5-[(1R)-1-hydroxy-2-[[(1R)-2-(4-methoxyphenyl)-1-methylethyl]amino]ethyl]phenyl]-formamide dihydrate. Formoterol fumarate is a powder that is slightly soluble in water. Formoterol fumarate  has a molecular weight of 840.91 g/mol, and the molecular formula is C42H52N4O12. The structural formula is as follows:. Formoterol fumarate contains two chiral centers and consists of a single enantiomeric pair (a racemate of R,R and S,S) . Glycopyrrolate is a quarternary ammonium bromide salt with the following chemical name: [RS-]-3-[(SR)-(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl-Pyrrolidinium bromide. Two asymmetric atoms of carbon are present in the molecule: Glycopyrronium bromide is represented by the (R,S)-(S,R) racemic pair of enantiomers, corresponding to the threo diastereoisomeric structure. Glycopyrrolate is a powder that is freely soluble in water. Glycopyrrolate has a molecular weight of 398.33 g/mol, and the molecular formula is C19H28BrNO3. The structural formula is as follows. Glycopyrrolate contains two chiral centers and is a racemate of a 1;1 mixture of the R,S and S,R diastereomers. The active moiety, glycopyrronium, is the positively charged ion of glycopyrrolate. TRIMBOW 86 mcg/4.9 mcg/10.6 mcg and TRIMBOW 172 mcg/4.9 mcg/10.6 mcg are formulated as a hydrofluoroalkane (HFA 134a) propelled pressurized, metered-dose inhalers, each containing 120 actuations.  The canister is supplied with a grey plastic actuator with an integrated dose counter mechanism and mouthpiece, and a red cap (TRIMBOW 86 mcg/4.9 mcg/10.6 mcg) or a green cap (TRIMBOW 172 mcg/4.9 mcg/10.6 mcg). As a solution, TRIMBOW does not need to be shaken before use. TRIMBOW should be “primed” by actuating 2 times prior to using the first dose from a new canister. If the inhaler has not been used for 30 days or longer, re-prime the inhaler [see How Supplied/Storage and Handling (16)]. After priming, each actuation meters 100 or 200 mcg of beclomethasone dipropionate, 6.0 mcg of formoterol fumarate (equivalent to 5.7 mcg of formoterol fumarate anhydrous), and 12.5 mcg of glycopyrrolate (equivalent to 10 mcg of glycopyrronium) in 73.8 mg of solution from the valve and delivers 86 or 172 mcg of beclomethasone dipropionate, 4.9 mcg of formoterol fumarate (equivalent to 4.2 mcg of formoterol fumarate anhydrous), and 10.6 mcg of glycopyrrolate (equivalent to 8.5 mcg of glycopyrronium) from the actuator. The actual amount of drug delivered to the lung may depend on patient factors, such as coordination of the device (metered dose inhaler [MDI]) actuation with the inhalation maneuver, inspiratory flow and peak inspiratory flow through the delivery system, which may vary in patients with asthma and other pulmonary diseases and conditions. Avoid spraying in the eyes or face while using TRIMBOW. TRIMBOW contains dehydrated alcohol (18% v/v), HFA 134a, and hydrochloric acid as excipients in the formulation."
    }
  ]
}
                    

{"NDC":[{"NDCCode":"63323-398-14","ProprietaryName":"Azithromycin","NonProprietaryName":"Azithromycin Monohydrate"},{"NDCCode":"63323-398-10","ProprietaryName":"Azithromycin","NonProprietaryName":"Azithromycin Monohydrate"},{"NDCCode":"63323-398-12","ProprietaryName":"Azithromycin","NonProprietaryName":"Azithromycin Monohydrate"},{"NDCCode":"21130-398-27","ProprietaryName":"Omeprazole Magnesium","NonProprietaryName":"Omeprazole Magnesium"},{"NDCCode":"21130-398-33","ProprietaryName":"Omeprazole Magnesium","NonProprietaryName":"Omeprazole Magnesium"},{"NDCCode":"21130-398-52","ProprietaryName":"Omeprazole Magnesium","NonProprietaryName":"Omeprazole Magnesium"},{"NDCCode":"63323-162-14","ProprietaryName":"Ketorolac Tromethamine","NonProprietaryName":"Ketorolac Tromethamine"},{"NDCCode":"63323-325-14","ProprietaryName":"Acyclovir","NonProprietaryName":"Acyclovir"},{"NDCCode":"63323-459-14","ProprietaryName":"Heparin Sodium","NonProprietaryName":"Heparin Sodium"},{"NDCCode":"63323-542-14","ProprietaryName":"Heparin Sodium","NonProprietaryName":"Heparin Sodium"},{"NDCCode":"63323-661-14","ProprietaryName":"Esmolol Hydrochloride","NonProprietaryName":"Esmolol Hydrochloride"},{"NDCCode":"63323-714-14","ProprietaryName":"Perikabiven","NonProprietaryName":"Dextrose, Soybean Oil, Electrolytes, Lysine, Phenylalanine, Leucine, Valine, Threonine, Methionine, Isoleucine, Tryptophan, Alanine, Arginine, Glycine, Proline, Histidine, Glutamic Acid, Serine, Aspartic Acid And Tyrosine"},{"NDCCode":"63323-806-20","ProprietaryName":"Fentanyl Citrate","NonProprietaryName":"Fentanyl Citrate"},{"NDCCode":"63323-885-14","ProprietaryName":"Levothyroxine Sodium","NonProprietaryName":"Levothyroxine Sodium"},{"NDCCode":"69677-071-02","ProprietaryName":"Mas Care-pak Dexamethasone","NonProprietaryName":"Dexamethasone Sodium Phosphate"},{"NDCCode":"70112-555-02","ProprietaryName":"Topidex","NonProprietaryName":"Dexamethasone Surgical Combo Kit"},{"NDCCode":"63323-578-01","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"63323-578-02","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"63323-578-05","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"63323-578-11","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"63323-578-12","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"63323-578-20","ProprietaryName":"Glycopyrrolate","NonProprietaryName":"Glycopyrrolate"},{"NDCCode":"0310-4616-12","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"0310-4616-28","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"0310-4616-39","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"0310-6616-01","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"0310-6616-39","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"0310-6616-95","ProprietaryName":"Breztri","NonProprietaryName":"Budesonide, Glycopyrrolate, And Formoterol Fumarate"},{"NDCCode":"10122-120-02","ProprietaryName":"Trimbow","NonProprietaryName":"Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate"},{"NDCCode":"10122-121-02","ProprietaryName":"Trimbow","NonProprietaryName":"Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate"}]}
                    

<NDCList><NDC><NDCCode>63323-398-14</NDCCode><ProprietaryName>Azithromycin</ProprietaryName><NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName></NDC><NDC><NDCCode>63323-398-10</NDCCode><ProprietaryName>Azithromycin</ProprietaryName><NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName></NDC><NDC><NDCCode>63323-398-12</NDCCode><ProprietaryName>Azithromycin</ProprietaryName><NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName></NDC><NDC><NDCCode>21130-398-27</NDCCode><ProprietaryName>Omeprazole Magnesium</ProprietaryName><NonProprietaryName>Omeprazole Magnesium</NonProprietaryName></NDC><NDC><NDCCode>21130-398-33</NDCCode><ProprietaryName>Omeprazole Magnesium</ProprietaryName><NonProprietaryName>Omeprazole Magnesium</NonProprietaryName></NDC><NDC><NDCCode>21130-398-52</NDCCode><ProprietaryName>Omeprazole Magnesium</ProprietaryName><NonProprietaryName>Omeprazole Magnesium</NonProprietaryName></NDC><NDC><NDCCode>63323-162-14</NDCCode><ProprietaryName>Ketorolac Tromethamine</ProprietaryName><NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName></NDC><NDC><NDCCode>63323-325-14</NDCCode><ProprietaryName>Acyclovir</ProprietaryName><NonProprietaryName>Acyclovir</NonProprietaryName></NDC><NDC><NDCCode>63323-459-14</NDCCode><ProprietaryName>Heparin Sodium</ProprietaryName><NonProprietaryName>Heparin Sodium</NonProprietaryName></NDC><NDC><NDCCode>63323-542-14</NDCCode><ProprietaryName>Heparin Sodium</ProprietaryName><NonProprietaryName>Heparin Sodium</NonProprietaryName></NDC><NDC><NDCCode>63323-661-14</NDCCode><ProprietaryName>Esmolol Hydrochloride</ProprietaryName><NonProprietaryName>Esmolol Hydrochloride</NonProprietaryName></NDC><NDC><NDCCode>63323-714-14</NDCCode><ProprietaryName>Perikabiven</ProprietaryName><NonProprietaryName>Dextrose, Soybean Oil, Electrolytes, Lysine, Phenylalanine, Leucine, Valine, Threonine, Methionine, Isoleucine, Tryptophan, Alanine, Arginine, Glycine, Proline, Histidine, Glutamic Acid, Serine, Aspartic Acid And Tyrosine</NonProprietaryName></NDC><NDC><NDCCode>63323-806-20</NDCCode><ProprietaryName>Fentanyl Citrate</ProprietaryName><NonProprietaryName>Fentanyl Citrate</NonProprietaryName></NDC><NDC><NDCCode>63323-885-14</NDCCode><ProprietaryName>Levothyroxine Sodium</ProprietaryName><NonProprietaryName>Levothyroxine Sodium</NonProprietaryName></NDC><NDC><NDCCode>69677-071-02</NDCCode><ProprietaryName>Mas Care-pak Dexamethasone</ProprietaryName><NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName></NDC><NDC><NDCCode>70112-555-02</NDCCode><ProprietaryName>Topidex</ProprietaryName><NonProprietaryName>Dexamethasone Surgical Combo Kit</NonProprietaryName></NDC><NDC><NDCCode>63323-578-01</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>63323-578-02</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>63323-578-05</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>63323-578-11</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>63323-578-12</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>63323-578-20</NDCCode><ProprietaryName>Glycopyrrolate</ProprietaryName><NonProprietaryName>Glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>0310-4616-12</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>0310-4616-28</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>0310-4616-39</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>0310-6616-01</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>0310-6616-39</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>0310-6616-95</NDCCode><ProprietaryName>Breztri</ProprietaryName><NonProprietaryName>Budesonide, Glycopyrrolate, And Formoterol Fumarate</NonProprietaryName></NDC><NDC><NDCCode>10122-120-02</NDCCode><ProprietaryName>Trimbow</ProprietaryName><NonProprietaryName>Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate</NonProprietaryName></NDC><NDC><NDCCode>10122-121-02</NDCCode><ProprietaryName>Trimbow</ProprietaryName><NonProprietaryName>Beclomethasone Dipropionate/formoterol Fumarate/glycopyrrolate</NonProprietaryName></NDC></NDCList>