RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-411-27</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-411-27)  / 2 mL in 1 VIAL (63323-411-22) </PackageDescription>
    <NDC11Code>63323-0411-27</NDC11Code>
    <ProductNDC>63323-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075154</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-01-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
    <Description>Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>60215-411-30</NDCCode>
    <PackageDescription>27 mL in 1 VIAL, GLASS (60215-411-30) </PackageDescription>
    <NDC11Code>60215-0411-30</NDC11Code>
    <ProductNDC>60215-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fludeoxyglucose</ProprietaryName>
    <ProprietaryNameSuffix>F18</ProprietaryNameSuffix>
    <NonProprietaryName>Fludeoxyglucose F18</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20111206</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203246</ApplicationNumber>
    <LabelerName>The University of Texas MD Anderson Cancer Center</LabelerName>
    <SubstanceName>FLUDEOXYGLUCOSE F-18</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mCi/mL</StrengthUnit>
    <Pharm_Classes>Radioactive Diagnostic Agent [EPC], Radiopharmaceutical Activity [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-10-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111206</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63323-411-10</NDCCode>
    <PackageDescription>10 VIAL in 1 TRAY (63323-411-10)  / 10 mL in 1 VIAL (63323-411-13) </PackageDescription>
    <NDC11Code>63323-0411-10</NDC11Code>
    <ProductNDC>63323-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075154</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000714</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
    <Description>Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-411-12</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-411-12)  / 2 mL in 1 VIAL (63323-411-15) </PackageDescription>
    <NDC11Code>63323-0411-12</NDC11Code>
    <ProductNDC>63323-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075154</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000714</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
    <Description>Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-411-25</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-411-25)  / 5 mL in 1 VIAL (63323-411-18) </PackageDescription>
    <NDC11Code>63323-0411-25</NDC11Code>
    <ProductNDC>63323-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Midazolam</ProprietaryName>
    <NonProprietaryName>Midazolam Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000714</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075154</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MIDAZOLAM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Benzodiazepine [EPC], Benzodiazepines [CS]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2024-08-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000714</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Midazolam injection is indicated: : 1 intramuscularly or intravenously for preoperative sedation/anxiolysis/amnesia; , 2 intravenously as an agent for sedation/anxiolysis/amnesia prior to or during diagnostic, therapeutic or endoscopic procedures, such as bronchoscopy, gastroscopy, cystoscopy, coronary angiography, cardiac catheterization, oncology procedures, radiologic procedures, suture of lacerations and other procedures either alone or in combination with other CNS depressants; , 3 intravenously for induction of general anesthesia, before administration of other anesthetic agents. With the use of narcotic premedication, induction of anesthesia can be attained within a relatively narrow dose range and in a short period of time. Intravenous midazolam can also be used as a component of intravenous supplementation of nitrous oxide and oxygen (balanced anesthesia); , 4 continuous intravenous infusion for sedation of intubated and mechanically ventilated patients as a component of anesthesia or during treatment in a critical care setting. .</IndicationAndUsage>
    <Description>Midazolam Injection, USP is a water-soluble benzodiazepine available as a sterile, non pyrogenic parenteral dosage form for intravenous or intramuscular injection. Each mL contains midazolam hydrochloride equivalent to 1 mg or 5 mg midazolam compounded with 0.8% sodium chloride and 0.01% edetate disodium, with 1% benzyl alcohol as preservative; the pH is adjusted to 3 to 3.6 with hydrochloric acid and, if necessary, sodium hydroxide. Midazolam is a white to light yellow crystalline compound, insoluble in water. The hydrochloride salt of midazolam, which is formed in situ, is soluble in aqueous solutions. Chemically, midazolam HCl is 8-chloro-6-(2-fluorophenyl)- 1-methyl-4H-imidazo[1,5-a][1,4]benzodiazepine hydrochloride. Midazolam hydrochloride has the following structural formula:. Under the acidic conditions required to solubilize midazolam in the product, midazolam is present as an equilibrium mixture (shown below) of the closed ring form shown above and an open-ring structure formed by the acid-catalyzed ring opening of the 4,5-double bond of the diazepine ring. The amount of open-ring form is dependent upon the pH of the solution. At the specified pH of the product, the solution may contain up to about 25% of the open-ring compound. At the physiologic conditions under which the product is absorbed (pH of 5 to 8) into the systemic circulation, any open-ring form present reverts to the physiologically active, lipophilic, closed-ring form (midazolam) and is absorbed as such. The following chart plots the percentage of midazolam present as the open-ring form as a function of pH in aqueous solutions. As indicated in the graph, the amount of open-ring compound present in solution is sensitive to changes in pH over the pH range specified for the product: 3.0 to 4.0 for the 1 mg/mL concentration and 3.0 to 3.6 for the 5 mg/mL concentration. Above pH 5, at least 99% of the mixture is present in the closed-ring form.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-286-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-27)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-286-41) </PackageDescription>
    <NDC11Code>63323-0286-27</NDC11Code>
    <ProductNDC>63323-286</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20090804</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-08-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
    <Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-288-27</NDCCode>
    <PackageDescription>5 AMPULE in 1 BOX (63323-288-27)  / 20 mL in 1 AMPULE (63323-288-25) </PackageDescription>
    <NDC11Code>63323-0288-27</NDC11Code>
    <ProductNDC>63323-288</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Naropin</ProprietaryName>
    <NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL</RouteName>
    <StartMarketingDate>19960924</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA020533</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090804</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Naropin is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery  including cesarean section; major nerve block; local  infiltration Acute Pain Management: epidural continuous  infusion or intermittent bolus, e.g., postoperative or labor; local  infiltration.</IndicationAndUsage>
    <Description>Naropin ® Injection contains ropivacaine HCl which is a member of the amino amide class of local anesthetics.  Naropin Injection is a sterile, isotonic solution that contains the enantiomerically pure drug substance, sodium chloride for isotonicity and water for injection. Sodium hydroxide and/or hydrochloric acid may be used for pH adjustment.  It is administered parenterally. Ropivacaine HCl is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate.  The drug substance is a white crystalline powder, with the following structural formula. At 25°C ropivacaine HCl has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution.  The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7).  However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. Naropin Injection is preservative-free and is available in single dose containers in 2 (0.2%), 5 (0.5%), 7.5 (0.75%) and 10 mg/mL (1%) concentrations.  The specific gravity of Naropin Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-294-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-294-27)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-294-01) </PackageDescription>
    <NDC11Code>63323-0294-27</NDC11Code>
    <ProductNDC>63323-294</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Polocaine-mpf</ProprietaryName>
    <NonProprietaryName>Mepivacaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION</RouteName>
    <StartMarketingDate>20090721</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA089409</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MEPIVACAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-10-12</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090721</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>POLOCAINE (Mepivacaine HCl Injection, USP), is indicated for production of local or regional analgesia and anesthesia by local infiltration, peripheral nerve block techniques, and central neural techniques including epidural and caudal blocks. The routes of administration and indicated concentrations for mepivacaine are:. See  DOSAGE AND ADMINISTRATION for additional information.  Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of mepivacaine.</IndicationAndUsage>
    <Description>Mepivacaine hydrochloride is 2-Piperidinecarboxamide, N-(2, 6-dimethylphenyl)-1-methyl-, monohydrochloride and has the following structural formula:. C 15H 22N 2O  HCl. It is a white, crystalline, odorless powder, soluble in water, but very resistant to both acid and alkaline hydrolysis. Mepivacaine hydrochloride is a local anesthetic available as sterile isotonic solutions (clear, colorless) in concentrations of 1%, 1.5% and 2% for injection via local infiltration, peripheral nerve block, and caudal and lumbar epidural blocks. Mepivacaine hydrochloride is related chemically and pharmacologically to the amide-type local anesthetics. It contains an amide linkage between the aromatic nucleus and the amino group. Composition of Available Solutions*. The pH of the solution is adjusted between 4.5 and 6.8 with sodium hydroxide or hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-477-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-477-27)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-477-01) </PackageDescription>
    <NDC11Code>63323-0477-27</NDC11Code>
    <ProductNDC>63323-477</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nesacaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Chloroprocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20101014</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA009435</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHLOROPROCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-09-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101014</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nesacaine 1% and 2% Injections, in multidose vials with methylparaben as preservative, are indicated for the production of local anesthesia by infiltration and peripheral nerve block.  They are not to be used for lumbar or caudal epidural anesthesia. Nesacaine-MPF 2% and 3% Injections, in single dose vials without preservative and without EDTA, are indicated for the production of local anesthesia by infiltration, peripheral and central nerve block, including lumbar and caudal epidural blocks. Nesacaine and Nesacaine-MPF Injections are not to be used for subarachnoid administration.</IndicationAndUsage>
    <Description>Nesacaine and Nesacaine-MPF Injections are sterile non-pyrogenic local anesthetics.  The active ingredient in Nesacaine and Nesacaine-MPF Injections is chloroprocaine HCl (benzoic acid, 4-amino-2-chloro-2-(diethylamino) ethyl ester, monohydrochloride), which is represented by the following structural formula. Table 1: Composition of Available Injections. The solutions are adjusted to pH 2.7 to 4.0 by means of sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen. Nesacaine and Nesacaine-MPF Injections should not be resterilized by autoclaving.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-478-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-478-27)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-478-01) </PackageDescription>
    <NDC11Code>63323-0478-27</NDC11Code>
    <ProductNDC>63323-478</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Nesacaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Chloroprocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20101014</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA009435</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHLOROPROCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Ester Local Anesthetic [EPC], Esters [CS], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-09-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101014</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Nesacaine 1% and 2% Injections, in multidose vials with methylparaben as preservative, are indicated for the production of local anesthesia by infiltration and peripheral nerve block.  They are not to be used for lumbar or caudal epidural anesthesia. Nesacaine-MPF 2% and 3% Injections, in single dose vials without preservative and without EDTA, are indicated for the production of local anesthesia by infiltration, peripheral and central nerve block, including lumbar and caudal epidural blocks. Nesacaine and Nesacaine-MPF Injections are not to be used for subarachnoid administration.</IndicationAndUsage>
    <Description>Nesacaine and Nesacaine-MPF Injections are sterile non-pyrogenic local anesthetics.  The active ingredient in Nesacaine and Nesacaine-MPF Injections is chloroprocaine HCl (benzoic acid, 4-amino-2-chloro-2-(diethylamino) ethyl ester, monohydrochloride), which is represented by the following structural formula. Table 1: Composition of Available Injections. The solutions are adjusted to pH 2.7 to 4.0 by means of sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen. Nesacaine and Nesacaine-MPF Injections should not be resterilized by autoclaving.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-482-27</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-482-27)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (63323-482-03) </PackageDescription>
    <NDC11Code>63323-0482-27</NDC11Code>
    <ProductNDC>63323-482</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>10; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-483-27</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-483-27)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (63323-483-03) </PackageDescription>
    <NDC11Code>63323-0483-27</NDC11Code>
    <ProductNDC>63323-483</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>20; .01</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-485-27</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-485-27)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (63323-485-01) </PackageDescription>
    <NDC11Code>63323-0485-27</NDC11Code>
    <ProductNDC>63323-485</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-486-27</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-486-27)  &gt; 20 mL in 1 VIAL, MULTI-DOSE (63323-486-02) </PackageDescription>
    <NDC11Code>63323-0486-27</NDC11Code>
    <ProductNDC>63323-486</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-489-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-489-27)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-489-02) </PackageDescription>
    <NDC11Code>63323-0489-27</NDC11Code>
    <ProductNDC>63323-489</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Lidocaine Hydrochloride,epinephrine Bitartrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS; EPINEPHRINE BITARTRATE</SubstanceName>
    <StrengthNumber>20; .005</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Adrenergic alpha-Agonists [MoA], Adrenergic beta-Agonists [MoA], Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Catecholamine [EPC], Catecholamines [CS], Local Anesthesia [PE], alpha-Adrenergic Agonist [EPC], beta-Adrenergic Agonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-492-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-492-27)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE (63323-492-04) </PackageDescription>
    <NDC11Code>63323-0492-27</NDC11Code>
    <ProductNDC>63323-492</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-495-27</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-495-27)  &gt; 2 mL in 1 VIAL, SINGLE-DOSE (63323-495-09) </PackageDescription>
    <NDC11Code>63323-0495-27</NDC11Code>
    <ProductNDC>63323-495</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Xylocaine</ProprietaryName>
    <ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
    <StartMarketingDate>20100812</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA006488</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Xylocaine (lidocaine HCl) Injections are indicated for production  of local or regional anesthesia by infiltration techniques such as  percutaneous injection and intravenous regional anesthesia by peripheral  nerve block techniques such as brachial plexus and intercostal and by  central neural techniques such as lumbar and caudal epidural blocks,  when the accepted procedures for these techniques as described in  standard textbooks are observed.</IndicationAndUsage>
    <Description>Xylocaine (lidocaine HCl) Injections are sterile, nonpyrogenic, aqueous solutions that contain a local anesthetic agent with or without epinephrine and are administered parenterally by injection.  See INDICATIONS AND USAGE section for specific uses. Xylocaine solutions contain lidocaine HCl, which is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular wt. 270.8.  Lidocaine HCl (C14H22N2O  HCl) has the following structural formula:. Epinephrine is (-) -3, 4-Dihydroxy-α-[(methylamino) methyl] benzyl alcohol and has the molecular wt. 183.21.  Epinephrine (C9H13NO3) has the following structural formula:. Dosage forms listed as Xylocaine-MPF indicate single dose solutions that are Methyl Paraben Free (MPF). Xylocaine MPF is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Xylocaine in multiple dose vials:  Each mL also contains 1 mg methyl­paraben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and/or hydrochloric acid. Xylocaine MPF with Epinephrine is a sterile, nonpyrogenic, isotonic solution containing sodium chloride.  Each mL contains lidocaine hydrochloride and epinephrine, with 0.5 mg sodium metabisulfite as an antioxidant and 0.2 mg citric acid as a stabilizer.   Xylocaine with Epinephrine in multiple dose vials:  Each mL also contains 1 mg methylparaben as antiseptic preservative.  The pH of these solutions is adjusted to approximately 4.5 (3.3 to 5.5) with sodium hydroxide and/or hydrochloric acid.  Filled under nitrogen.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-650-27</NDCCode>
    <PackageDescription>10 BOX in 1 CARTON (63323-650-27)  &gt; 1 VIAL in 1 BOX &gt; 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0650-27</NDC11Code>
    <ProductNDC>63323-650</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxaliplatin</ProprietaryName>
    <NonProprietaryName>Oxaliplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100611</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078811</ApplicationNumber>
    <LabelerName>APP Pharmaceuticals, LLC</LabelerName>
    <SubstanceName>OXALIPLATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC],Platinum-containing Compounds [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2015-05-22</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>63323-658-27</NDCCode>
    <PackageDescription>1 VIAL in 1 BOX (63323-658-27)  / 18 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0658-27</NDC11Code>
    <ProductNDC>63323-658</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Chlorothiazide</ProprietaryName>
    <NonProprietaryName>Chlorothiazide Sodium</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20091021</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA090896</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHLOROTHIAZIDE SODIUM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/18mL</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide Diuretic [EPC], Thiazides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-06-14</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20091021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <Description>Chlorothiazide sodium for injection, USP is a diuretic and antihypertensive.  It is 6-chloro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide monosodium salt, and its structural formula is.  C7H5ClN3NaO4S2                        M.W.  317.71. Chlorothiazide sodium for injection, USP is a sterile lyophilized white powder and is supplied in a vial containing:  Chlorothiazide sodium equivalent to chlorothiazide 500 mg, and the inactive ingredient mannitol 250 mg with sodium hydroxide to adjust pH. Chlorothiazide is a diuretic and antihypertensive.  It is 6-chloro-2H-1,2,4-benzothiadiazine-7-sulfonamide 1,1-dioxide, and its structural formula is. C7H6ClN3O4S2                               M.W.  295.72.  It is a white, or practically white, crystalline powder, which is very slightly soluble in water, but readily soluble in dilute aqueous sodium hydroxide.  It is soluble in urine to the extent of about 150 mg per 100 mL at pH 7.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-750-27</NDCCode>
    <PackageDescription>10 BOX in 1 CARTON (63323-750-27)  &gt; 1 VIAL in 1 BOX &gt; 20 mL in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0750-27</NDC11Code>
    <ProductNDC>63323-750</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxaliplatin</ProprietaryName>
    <NonProprietaryName>Oxaliplatin</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20100611</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078811</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>OXALIPLATIN</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Platinum-based Drug [EPC],Platinum-containing Compounds [Chemical/Ingredient]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-01-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20100611</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>0781-6000-78</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (0781-6000-78)  / 5 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>00781-6000-78</NDC11Code>
    <ProductNDC>0781-6000</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Difluprednate Ophthalmic</ProprietaryName>
    <NonProprietaryName>Difluprednate Ophthalmic</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20130515</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA022212</ApplicationNumber>
    <LabelerName>Sandoz Inc</LabelerName>
    <SubstanceName>DIFLUPREDNATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2026-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210915</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Difluprednate ophthalmic emulsion is a corticosteroid indicated for: 1 The treatment of inflammation and pain associated with ocular surgery. (1.1), 2 The treatment of endogenous anterior uveitis. (1.2).</IndicationAndUsage>
    <Description>Difluprednate ophthalmic emulsion, 0.05% is a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. The chemical name is 6α,9difluoro-11β,17,21-trihydroxypregna-1,4- diene-3,20-dione 21-acetate 17-butyrate (CAS number 23674-86-4). Difluprednate is represented by the following structural formula. Difluprednate has a molecular weight of 508.56 g/mol, and the empirical formula is C27H34F2O7. Each mL of difluprednate ophthalmic emulsion contains:. Active: difluprednate 0.5 mg (0.05%);. Inactives: boric acid, castor oil, edetate disodium, glycerin, polysorbate 80, sodium acetate, sodium hydroxide (to adjust the pH to 5.2 to 5.8), water for injection. Preservative: sorbic acid 0.1%. The emulsion is essentially isotonic with a tonicity of 304 to 411 mOsm/kg.</Description>
  </NDC>
  <NDC>
    <NDCCode>42002-411-09</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (42002-411-09)  &gt; 119 g in 1 TUBE</PackageDescription>
    <NDC11Code>42002-0411-09</NDC11Code>
    <ProductNDC>42002-411</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Listerine Essential Care</ProprietaryName>
    <NonProprietaryName>Sodium Monofluorophosphate</NonProprietaryName>
    <DosageFormName>GEL, DENTIFRICE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20120312</StartMarketingDate>
    <EndMarketingDate>20220924</EndMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part355</ApplicationNumber>
    <LabelerName>Johnson &amp; Johnson Consumer Inc.</LabelerName>
    <SubstanceName>SODIUM MONOFLUOROPHOSPHATE</SubstanceName>
    <StrengthNumber>1.3</StrengthNumber>
    <StrengthUnit>mg/g</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2022-09-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20120312</StartMarketingDatePackage>
    <EndMarketingDatePackage>20220924</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>53208-411-50</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (53208-411-50)  / 50 mL in 1 BOTTLE (53208-411-51) </PackageDescription>
    <NDC11Code>53208-0411-50</NDC11Code>
    <ProductNDC>53208-411</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Gangnam Glow Sunscreen 50</ProprietaryName>
    <NonProprietaryName>Avobenzone, Homosalate, Octinoxate, Octisalate, Octocrylene</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20250507</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M020</ApplicationNumber>
    <LabelerName>LG HOUSEHOLD &amp; HEALTH CARE LTD.</LabelerName>
    <SubstanceName>HOMOSALATE; OCTISALATE; AVOBENZONE; OCTINOXATE; OCTOCRYLENE</SubstanceName>
    <StrengthNumber>90; 45; 27; 70; 90</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-05-07</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250507</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protection measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>63739-411-10</NDCCode>
    <PackageDescription>10 BLISTER PACK in 1 BOX, UNIT-DOSE (63739-411-10)  / 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
    <NDC11Code>63739-0411-10</NDC11Code>
    <ProductNDC>63739-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Levetiracetam</ProprietaryName>
    <NonProprietaryName>Levetiracetam</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20090115</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078993</ApplicationNumber>
    <LabelerName>Mckesson Corporation DBA SKY Packaginng</LabelerName>
    <SubstanceName>LEVETIRACETAM</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20161229</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Levetiracetam is indicated for the treatment of partial-onset seizures in patients 1 month of age and older (1.1). Levetiracetam is indicated for adjunctive therapy in the treatment of:  : 1 Myoclonic seizures in patients 12 years of age and older with juvenile myoclonic epilepsy (1.2), 2 Primary generalized tonic-clonic seizures in patients 6 years of age and older with idiopathic generalized epilepsy  (1.3).</IndicationAndUsage>
    <Description>Levetiracetam is an antiepileptic drug available as 250 mg (blue), 500 mg (yellow), and 750 mg (orange) tablets for oral administration. The chemical name of levetiracetam, a single enantiomer, is (-)-(S)-α-ethyl-2-oxo-1-pyrrolidine acetamide, its molecular formula is C 8H 14N 2O 2 and its molecular weight is 170.21. Levetiracetam is chemically unrelated to existing antiepileptic drugs (AEDs). It has the following structural formula:. Levetiracetam USP is a white to off-white, crystalline powder with a faint odor and a bitter taste. It is very soluble in water (104 g/100 mL). It is freely soluble in chloroform (65.3 g/100 mL) and in methanol (53.6 g/100 mL), soluble in ethanol (16.5 g/100 mL), sparingly soluble in acetonitrile (5.7 g/100 mL) and practically insoluble in n-hexane. (Solubility limits are expressed as g/100 mL solvent.) Levetiracetam tablets USP contain the labeled amount of levetiracetam. Inactive ingredients: corn starch, colloidal silicon dioxide, povidone, talc, magnesium stearate, hypromellose, titanium dioxide, polyethylene glycol, and purified water. In addition 250 mg contains FD&amp;C Blue #2/indigo carmine aluminum lake, 500 mg contains iron oxide yellow, and 750 mg contains FD&amp;C Yellow #6/sunset yellow FCF aluminum lake, FD&amp;C Blue #2/indigo carmine aluminum lake, and iron oxide red. Meets USP dissolution test 2.</Description>
  </NDC>
  <NDC>
    <NDCCode>65145-161-01</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (65145-161-01)  / 5 mL in 1 BOTTLE</PackageDescription>
    <NDC11Code>65145-0161-01</NDC11Code>
    <ProductNDC>65145-161</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Difluprednate</ProprietaryName>
    <NonProprietaryName>Difluprednate</NonProprietaryName>
    <DosageFormName>EMULSION</DosageFormName>
    <RouteName>OPHTHALMIC</RouteName>
    <StartMarketingDate>20241226</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219441</ApplicationNumber>
    <LabelerName>Caplin Steriles Limited</LabelerName>
    <SubstanceName>DIFLUPREDNATE</SubstanceName>
    <StrengthNumber>.5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Difluprednate ophthalmic emulsion is a topical corticosteroid that is indicated for: 1 The treatment of inflammation and pain associated with ocular surgery. (1.1), 2 The treatment of endogenous anterior uveitis. (1.2).</IndicationAndUsage>
    <Description>Difluprednate ophthalmic emulsion 0.05% is a sterile, topical anti-inflammatory corticosteroid for ophthalmic use. The chemical name is 6α, 9difluoro-11β,17,21-trihydroxypregna-1,4-diene-3,20-dione 21-acetate 17-butyrate (CAS number 23674-86-4). Difluprednate is represented by the following structural formula. Difluprednate has a molecular weight of 508.56 g/mol, and the molecular formula is C27H34F2O7. Each mL contains: ACTIVE: difluprednate 0.5 mg (0.05%); INACTIVE: boric acid, castor oil, glycerin, polysorbate 80, water for injection, sodium acetate, edetate disodium, sodium hydroxide (to adjust the pH to 5.2 to 5.8). The emulsion is essentially isotonic with a tonicity of 304 to 411 mOsm/kg. PRESERVATIVE: sorbic acid 0.1%.</Description>
  </NDC>
  <NDC>
    <NDCCode>67112-411-11</NDCCode>
    <PackageDescription>600000 CAPSULE, GELATIN COATED in 1 BOX (67112-411-11)</PackageDescription>
    <NDC11Code>67112-0411-11</NDC11Code>
    <ProductNDC>67112-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <NonProprietaryName>Fish, Doconexent, Icosapent, Thiamine Mononitrate, Riboflavin, Inositol Niacinate, Pyridoxine Hydrochloride, Cyanocobalamin, Folic Acid, Ascorbic Acid, Cholecalciferol, D-alpha-tocopherol, Biotin, Ferrous Fumarate, Zinc Sulfate Monohydrate, Cupric Sulfate Anhydrous, Docusate Sodium</NonProprietaryName>
    <DosageFormName>CAPSULE, GELATIN COATED</DosageFormName>
    <StartMarketingDate>20161118</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Medecor Pharma, LLC</LabelerName>
    <SubstanceName>FISH OIL; DOCONEXENT; ICOSAPENT; THIAMINE MONONITRATE; RIBOFLAVIN; INOSITOL NIACINATE; PYRIDOXINE HYDROCHLORIDE; CYANOCOBALAMIN; FOLIC ACID; ASCORBIC ACID; CHOLECALCIFEROL; .ALPHA.-TOCOPHEROL, D-; BIOTIN; FERROUS FUMARATE; ZINC SULFATE MONOHYDRATE; CUPRIC SULFATE ANHYDROUS; DOCUSATE SODIUM</SubstanceName>
    <StrengthNumber>500; 215; 45; 3; 3.4; 20; 25; 100; 1; 60; 800; 30; 300; 27; 10; 2; 25</StrengthNumber>
    <StrengthUnit>mg/1; mg/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; mg/1; mg/1; [iU]/1; [iU]/1; ug/1; mg/1; mg/1; mg/1; mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2014-02-04</LastUpdate>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>68071-3694-1</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (68071-3694-1) </PackageDescription>
    <NDC11Code>68071-3694-01</NDC11Code>
    <ProductNDC>68071-3694</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Atenolol</ProprietaryName>
    <ProprietaryNameSuffix>29300-411</ProprietaryNameSuffix>
    <NonProprietaryName>Atenolol</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20191121</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213136</ApplicationNumber>
    <LabelerName>NuCare Pharmaceuticals,Inc.</LabelerName>
    <SubstanceName>ATENOLOL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-12-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20241003</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (e.g., on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
    <Description>Atenolol, USP a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as 4-[2-hydroxy-3-[(1-methylethyl) amino] propoxy]-benzeneacetamide. The molecular and structural formulas are:. C 14H 22N 2O 3. Atenolol (free base) has a molecular weight of 266.34. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37°C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25°C) and less soluble in chloroform (3 mg/mL at 25°C). Atenolol tablets, USP are available as 25 mg, 50 mg and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, povidone and sodium starch glycolate.</Description>
  </NDC>
  <NDC>
    <NDCCode>68083-411-10</NDCCode>
    <PackageDescription>10 CARTON in 1 CARTON (68083-411-10)  &gt; 1 BAG in 1 CARTON (68083-411-01)  &gt; 200 mL in 1 BAG</PackageDescription>
    <NDC11Code>68083-0411-10</NDC11Code>
    <ProductNDC>68083-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Milrinone Lactate In Dextrose</ProprietaryName>
    <NonProprietaryName>Milrinone Lactate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200716</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213585</ApplicationNumber>
    <LabelerName>Gland Pharma Limited</LabelerName>
    <SubstanceName>MILRINONE LACTATE</SubstanceName>
    <StrengthNumber>.2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Phosphodiesterase 3 Inhibitor [EPC], Phosphodiesterase 3 Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-08-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200716</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Milrinone is indicated for the short-term intravenous treatment of patients with acute decompensated heart failure. Patients receiving milrinone should be observed closely with appropriate electrocardiographic equipment. The facility for immediate treatment of potential cardiac events, which may include life-threatening ventricular arrhythmias, must be available. The majority of experience with intravenous milrinone has been in patients receiving digoxin and diuretics. There is no experience in controlled trials with infusions of milrinone for periods exceeding 48 hours.</IndicationAndUsage>
    <Description>Milrinone lactate is a member of a new class of bipyridine is inotropic/vasodilator agents with phosphodiesterase inhibitor activity, distinct from digitalis glycosides or catecholamines. Milrinone lactate is designated chemically as 1,6-dihydro-2-methyl-6-oxo-[3,4'-bipyridine]-5-carbonitrile lactate and has the following structure. Milrinone is an off-white to tan crystalline compound with a molecular weight of 211.2 and a molecular formula of C12H9N3O. It is freely soluble in dimethyl sulfoxide, very slightly soluble in methanol, practically insoluble in water and in chloroform. As the lactate salt, it is stable and colorless to pale yellow in solution. Milrinone is available as sterile aqueous solutions of the lactate salt of milrinone for infusion intravenously. The flexible containers provide two ready-to-use dilutions of milrinone in volumes of 100 mL and 200 mL of 5% Dextrose Injection. Each mL contains milrinone lactate equivalent to 200 mcg milrinone. The nominal concentration of lactic acid is 0.282 mg/mL. Each mL also contains 54.3 mg Dextrose Hydrous, USP. The pH is adjusted with lactic acid and/or sodium hydroxide pH 3.5 (3.2 to 4.0). The flexible container is manufactured from a specially designed multilayer plastic. Solutions in contact with the plastic container leach out certain chemical components from the plastic in very small amounts; however, biological testing was supportive of the safety of the plastic container materials. The flexible container has a foil overwrap. Water can permeate the plastic into the overwrap, but the amount is insufficient to significantly affect the premixed solution.</Description>
  </NDC>
  <NDC>
    <NDCCode>69366-411-16</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (69366-411-16)  *  1 TUBE in 1 CARTON (69366-408-13)  &gt; 15 g in 1 TUBE *  1 BOTTLE in 1 CARTON (69366-410-07)  &gt; 60 g in 1 BOTTLE</PackageDescription>
    <NDC11Code>69366-0411-16</NDC11Code>
    <ProductNDC>69366-411</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Advanced Acne Regimen</ProprietaryName>
    <ProprietaryNameSuffix>0.5% Salicylic Acid Acne Treatment</ProprietaryNameSuffix>
    <NonProprietaryName>Salicylic Acid</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20190120</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part333D</ApplicationNumber>
    <LabelerName>The Honest Company, Inc.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2021-07-27</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190120</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>71205-411-30</NDCCode>
    <PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (71205-411-30) </PackageDescription>
    <NDC11Code>71205-0411-30</NDC11Code>
    <ProductNDC>71205-411</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Oxcarbazepine</ProprietaryName>
    <NonProprietaryName>Oxcarbazepine</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20071009</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077802</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>OXCARBAZEPINE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-11-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200226</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Oxcarbazepine tablets are indicated for use as monotherapy or adjunctive therapy in the treatment of partial-onset seizures in adults and as monotherapy in the treatment of partial-onset seizures in pediatric patients aged 4 years and above and as adjunctive therapy in pediatric patients aged 2 years and above with partial-onset seizures.</IndicationAndUsage>
    <Description>Oxcarbazepine Tablets USP are an antiepileptic drug available as 150 mg, 300 mg and 600 mg film-coated tablets for oral administration. Oxcarbazepine, USP is 10,11-Dihydro-10-oxo-5H-dibenz[b,f]azepine-5-carboxamide, and its structural formula is:. Oxcarbazepine, USP is a light orange to creamish white or off-white powder.  It is soluble in acetic acid, sparingly soluble in chloroform, practically insoluble in water. Its molecular weight is 252.27. Oxcarbazepine film-coated tablets contain the following inactive ingredients: colloidal silicon dioxide, crospovidone, ferric oxide (yellow), hypromellose, magnesium stearate, meglumine, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
  </NDC>
</NDCList>