{
"NDC": [
{
"NDCCode": "63323-464-39",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-39) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-09) ",
"NDC11Code": "63323-0464-39",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220729",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63323-466-39",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-466-39) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-466-09) ",
"NDC11Code": "63323-0466-39",
"ProductNDC": "63323-466",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-10-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220729",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63323-771-39",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (63323-771-39) / 30 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "63323-0771-39",
"ProductNDC": "63323-771",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azacitidine",
"NonProprietaryName": "Azacitidine",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20170316",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207518",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "AZACITIDINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/30mL",
"Pharm_Classes": "Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170316",
"SamplePackage": "N",
"IndicationAndUsage": "Azacitidine for injection is a nucleoside metabolic inhibitor indicated for the treatment of: 1 Adult patients with the following FAB myelodysplastic syndrome (MDS) subtypes: Refractory anemia (RA) or refractory anemia with ringed sideroblasts (RARS) (if accompanied by neutropenia or thrombocytopenia or requiring transfusions), refractory anemia with excess blasts (RAEB), refractory anemia with excess blasts in transformation (RAEB-T), and chronic myelomonocytic leukemia (CMMoL). (1.1).",
"Description": "Azacitidine for injection contains azacitidine, which is a nucleoside metabolic inhibitor. Azacitidine is 4-amino-1-β-D-ribofuranosyl-s-triazin-2(1H)-one. The structural formula is as follows:. The empirical formula is C8H12N4O5. The molecular weight is 244. Azacitidine is a white to off-white solid. Azacitidine was found to be insoluble in acetone, ethanol, and methyl ethyl ketone; slightly soluble in ethanol/water (50/50), propylene glycol, and polyethylene glycol; sparingly soluble in water, water saturated octanol, 5% dextrose in water, N-methyl-2-pyrrolidone, normal saline and 5% Tween 80 in water; and soluble in dimethylsulfoxide (DMSO). The finished product is supplied in a sterile form for reconstitution as a suspension for subcutaneous injection or reconstitution as a solution with further dilution for intravenous infusion. Vials of Azacitidine for injection contain 100 mg of azacitidine and 100 mg mannitol as a sterile lyophilized powder."
},
{
"NDCCode": "63323-464-17",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-17) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-464-01) ",
"NDC11Code": "63323-0464-17",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070552",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101119",
"SamplePackage": "N",
"IndicationAndUsage": "SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure:."
},
{
"NDCCode": "63323-464-31",
"PackageDescription": "5 VIAL, SINGLE-DOSE in 1 BOX (63323-464-31) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-03) ",
"NDC11Code": "63323-0464-31",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101119",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63323-464-33",
"PackageDescription": "5 AMPULE in 1 BOX (63323-464-33) > 30 mL in 1 AMPULE",
"NDC11Code": "63323-0464-33",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA018304",
"LabelerName": "APP Pharmaceuticals, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]",
"Status": "Deprecated",
"LastUpdate": "2014-04-22"
},
{
"NDCCode": "63323-464-37",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-37) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-02) ",
"NDC11Code": "63323-0464-37",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018304",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-10-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101119",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63323-464-38",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-38) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-464-08) ",
"NDC11Code": "63323-0464-38",
"ProductNDC": "63323-464",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sensorcaine",
"ProprietaryNameSuffix": "Mpf",
"NonProprietaryName": "Bupivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL",
"StartMarketingDate": "20101119",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070552",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "BUPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-12-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220729",
"SamplePackage": "N",
"IndicationAndUsage": "Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.",
"Description": "Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage."
},
{
"NDCCode": "63323-203-20",
"PackageDescription": "10 VIAL in 1 TRAY (63323-203-20) / 15 mL in 1 VIAL (63323-203-01) ",
"NDC11Code": "63323-0203-20",
"ProductNDC": "63323-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160817",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-203-26",
"PackageDescription": "10 VIAL in 1 TRAY (63323-203-26) / 15 mL in 1 VIAL (63323-203-41) ",
"NDC11Code": "63323-0203-26",
"ProductNDC": "63323-203",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20160817",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/15mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20160817",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials containing the equivalent of 750 mg of the base is equivalent to 0.51 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-221-10",
"PackageDescription": "25 VIAL in 1 TRAY (63323-221-10) / 10 mL in 1 VIAL (63323-221-01) ",
"NDC11Code": "63323-0221-10",
"ProductNDC": "63323-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000901",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-221-16",
"PackageDescription": "25 VIAL in 1 TRAY (63323-221-16) / 10 mL in 1 VIAL (63323-221-41) ",
"NDC11Code": "63323-0221-16",
"ProductNDC": "63323-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210503",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-221-38",
"PackageDescription": "25 VIAL in 1 TRAY (63323-221-38) > 10 mL in 1 VIAL (63323-221-33) ",
"NDC11Code": "63323-0221-38",
"ProductNDC": "63323-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "Fresenius Kabi, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171101",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials containing the equivalent of 500 mg vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-221-48",
"PackageDescription": "25 VIAL in 1 TRAY (63323-221-48) > 10 mL in 1 VIAL (63323-221-43) ",
"NDC11Code": "63323-0221-48",
"ProductNDC": "63323-221",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "Fresenius Kabi, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171026",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-284-20",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-20) / 20 mL in 1 VIAL (63323-284-01) ",
"NDC11Code": "63323-0284-20",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20000920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2025-05-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20000920",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-284-26",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-26) / 20 mL in 1 VIAL (63323-284-42) ",
"NDC11Code": "63323-0284-26",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20210503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2024-04-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210503",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-284-45",
"PackageDescription": "10 VIAL in 1 TRAY (63323-284-45) > 20 mL in 1 VIAL (63323-284-41) ",
"NDC11Code": "63323-0284-45",
"ProductNDC": "63323-284",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171026",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204107",
"LabelerName": "Fresenius Kabi, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2022-12-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171026",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:."
},
{
"NDCCode": "63323-295-61",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-295-61) > 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0295-61",
"ProductNDC": "63323-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2021-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010717",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "63323-295-66",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-295-66) / 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0295-66",
"ProductNDC": "63323-295",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010717",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010717",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "63323-314-61",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-314-61) > 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0314-61",
"ProductNDC": "63323-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20041130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2021-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041130",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "63323-314-66",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-314-66) / 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0314-66",
"ProductNDC": "63323-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20041130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062663",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2023-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20041130",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.",
"Description": "Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "63323-314-68",
"PackageDescription": "1 BOTTLE in 1 CARTON (63323-314-68) > 100 mL in 1 BOTTLE",
"NDC11Code": "63323-0314-68",
"ProductNDC": "63323-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204125",
"LabelerName": "Fresenius Kabi, LLC",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC], Glycopeptides [CS]",
"Status": "Active",
"LastUpdate": "2019-02-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170901",
"SamplePackage": "N",
"IndicationAndUsage": "Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.",
"Description": "Vancomycin hydrochloride for injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientals). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "63323-360-19",
"PackageDescription": "25 VIAL, PLASTIC in 1 TRAY (63323-360-19) / 10 mL in 1 VIAL, PLASTIC (63323-360-01) ",
"NDC11Code": "63323-0360-19",
"ProductNDC": "63323-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170615",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.",
"Description": "Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "63323-360-59",
"PackageDescription": "25 VIAL, PLASTIC in 1 TRAY (63323-360-59) / 50 mL in 1 VIAL, PLASTIC (63323-360-03) ",
"NDC11Code": "63323-0360-59",
"ProductNDC": "63323-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170615",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.",
"Description": "Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "63323-360-61",
"PackageDescription": "20 VIAL, PLASTIC in 1 TRAY (63323-360-61) / 100 mL in 1 VIAL, PLASTIC (63323-360-05) ",
"NDC11Code": "63323-0360-61",
"ProductNDC": "63323-360",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Calcium Gluconate",
"NonProprietaryName": "Calcium Gluconate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170615",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208418",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "CALCIUM GLUCONATE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20170615",
"SamplePackage": "N",
"IndicationAndUsage": "Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.",
"Description": "Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium."
},
{
"NDCCode": "63323-413-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 TRAY (63323-413-10) > 10 mL in 1 VIAL, MULTI-DOSE (63323-413-01) ",
"NDC11Code": "63323-0413-10",
"ProductNDC": "63323-413",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203629",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150108",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.",
"Description": "Neostigmine Methylsulfate Injection, USP, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "63323-413-36",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 TRAY (63323-413-36) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "63323-0413-36",
"ProductNDC": "63323-413",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203629",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150108",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.",
"Description": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "63323-415-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 TRAY (63323-415-10) > 10 mL in 1 VIAL, MULTI-DOSE (63323-415-01) ",
"NDC11Code": "63323-0415-10",
"ProductNDC": "63323-415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203629",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2022-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150108",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.",
"Description": "Neostigmine Methylsulfate Injection, USP, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "63323-415-36",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 TRAY (63323-415-36) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "63323-0415-36",
"ProductNDC": "63323-415",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Neostigmine Methylsulfate",
"NonProprietaryName": "Neostigmine Methylsulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203629",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "NEOSTIGMINE METHYLSULFATE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150108",
"SamplePackage": "N",
"IndicationAndUsage": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.",
"Description": "Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment."
},
{
"NDCCode": "63323-517-74",
"PackageDescription": "24 BAG in 1 CASE (63323-517-74) / 250 mL in 1 BAG (63323-517-01) ",
"NDC11Code": "63323-0517-74",
"ProductNDC": "63323-517",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170824",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "10000",
"StrengthUnit": "[USP'U]/100mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2024-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170824",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin sodium is indicated for: 1 Prophylaxis and treatment of venous thromboembolism and pulmonary embolism;, 2 Atrial fibrillation with embolization; , 3 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 4 Prevention of clotting in arterial and cardiac surgery; , 5 Prophylaxis and treatment of peripheral arterial embolism; , 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection and Heparin Sodium in 5% Dextrose Injection are sterile, nonpyrogenic solutions prepared from heparin sodium (derived from porcine intestinal mucosa) for intravenous administration. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium in 0.45% Sodium Chloride Injection, is available as follows. Each 100 mL contains heparin sodium 5,000 or 10,000 USP Units; sodium chloride, 0.45 g; edetate disodium, dihydrate, 0.0111 g added as a stabilizer and water for injection, q.s. Each liter contains the following electrolytes: Sodium 77 mEq and chloride 77 mEq; pH 5.0 to 7.5. The solution may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Heparin Sodium in 5% Dextrose Injection, is available as follows. Each 100 mL contains heparin sodium 5,000 or 10,000 USP Units; dextrose hydrous, 5 g; citric acid anhydrous, 51 mg and sodium citrate dihydrate, 334 mg added as buffers; and sodium metabisulfite, 20 mg added as an antioxidant. Each liter contains the following electrolytes: Sodium 39 mEq and citrate 42 mEq; pH 5.0 to 7.5."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63323-464-39</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-39) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-09) </PackageDescription>
<NDC11Code>63323-0464-39</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63323-466-39</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-466-39) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-466-09) </PackageDescription>
<NDC11Code>63323-0466-39</NDC11Code>
<ProductNDC>63323-466</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63323-771-39</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-771-39) / 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>63323-0771-39</NDC11Code>
<ProductNDC>63323-771</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azacitidine</ProprietaryName>
<NonProprietaryName>Azacitidine</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20170316</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207518</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>AZACITIDINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/30mL</StrengthUnit>
<Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170316</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azacitidine for injection is a nucleoside metabolic inhibitor indicated for the treatment of: 1 Adult patients with the following FAB myelodysplastic syndrome (MDS) subtypes: Refractory anemia (RA) or refractory anemia with ringed sideroblasts (RARS) (if accompanied by neutropenia or thrombocytopenia or requiring transfusions), refractory anemia with excess blasts (RAEB), refractory anemia with excess blasts in transformation (RAEB-T), and chronic myelomonocytic leukemia (CMMoL). (1.1).</IndicationAndUsage>
<Description>Azacitidine for injection contains azacitidine, which is a nucleoside metabolic inhibitor. Azacitidine is 4-amino-1-β-D-ribofuranosyl-s-triazin-2(1H)-one. The structural formula is as follows:. The empirical formula is C8H12N4O5. The molecular weight is 244. Azacitidine is a white to off-white solid. Azacitidine was found to be insoluble in acetone, ethanol, and methyl ethyl ketone; slightly soluble in ethanol/water (50/50), propylene glycol, and polyethylene glycol; sparingly soluble in water, water saturated octanol, 5% dextrose in water, N-methyl-2-pyrrolidone, normal saline and 5% Tween 80 in water; and soluble in dimethylsulfoxide (DMSO). The finished product is supplied in a sterile form for reconstitution as a suspension for subcutaneous injection or reconstitution as a solution with further dilution for intravenous infusion. Vials of Azacitidine for injection contain 100 mg of azacitidine and 100 mg mannitol as a sterile lyophilized powder.</Description>
</NDC>
<NDC>
<NDCCode>63323-464-17</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-17) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-464-01) </PackageDescription>
<NDC11Code>63323-0464-17</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070552</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is indicated in adults for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of SENSORCAINE / SENSORCAINE WITH EPINEPHRINE are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE is parenterally by injection, for infiltration, perineural, caudal, epidural, or retrobulbar use. SENSORCAINE-MPF / SENSORCAINE-MPF WITH EPINEPHRINE injections are Methyl Paraben Free (MPF). SENSORCAINE/SENSORCAINE WITH EPINEPHRINE injections contains bupivacaine hydrochloride, a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000. The route of administration for SENSORCAINE / SENSORCAINE WITH EPINEPHRINE is parenterally by injection, for infiltration and perineural use. Bupivacaine hydrochloride is a white or almost white, crystalline powder or colorless crystals, soluble in water, freely soluble in alcohol. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage. Bupivacaine hydrochloride chemical name is 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate. The molecular formula is C18H28N2O·HCl·H2O, with a molecular weight of 342.9 g/mol. Bupivacaine hydrochloride monohydrate has the following chemical structure:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Epinephrine bitartrate is a white to greyish white or light brownish-grey, odorless, crystalline powder, freely soluble in water, slightly soluble in 96% ethanol and methanol, practically insoluble in chloroform, methylene chloride and ether. Epinephrine bitartrate chemical name is (-)-3,4-Dihydroxy- α [(methylamino)methyl] benzyl alcohol (+) tartrate (1:1) salt. The molecular formula is C9H13NO3·C4H6O6, with a molecular weight of 333.29 g/mol. Epinephrine bitartrate has the following chemical structure:.</Description>
</NDC>
<NDC>
<NDCCode>63323-464-31</NDCCode>
<PackageDescription>5 VIAL, SINGLE-DOSE in 1 BOX (63323-464-31) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-03) </PackageDescription>
<NDC11Code>63323-0464-31</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63323-464-33</NDCCode>
<PackageDescription>5 AMPULE in 1 BOX (63323-464-33) > 30 mL in 1 AMPULE</PackageDescription>
<NDC11Code>63323-0464-33</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA018304</ApplicationNumber>
<LabelerName>APP Pharmaceuticals, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC],Amides [Chemical/Ingredient],Local Anesthesia [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2014-04-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>63323-464-37</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-37) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-464-02) </PackageDescription>
<NDC11Code>63323-0464-37</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018304</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2- piperidinecarboxamide, 1-butyl- N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pK a of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63323-464-38</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-464-38) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-464-08) </PackageDescription>
<NDC11Code>63323-0464-38</NDC11Code>
<ProductNDC>63323-464</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sensorcaine</ProprietaryName>
<ProprietaryNameSuffix>Mpf</ProprietaryNameSuffix>
<NonProprietaryName>Bupivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; INTRACAUDAL; PERINEURAL</RouteName>
<StartMarketingDate>20101119</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070552</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>BUPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-12-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220729</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sensorcaine (bupivacaine HCl) is indicated for the production of local or regional anesthesia or analgesia for surgery, dental and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Only the 0.25% and 0.5% concentrations are indicated for obstetrical anesthesia (see WARNINGS). Experience with nonobstetrical surgical procedures in pregnant patients is not sufficient to recommend use of the 0.75% concentration of bupivacaine HCl in these patients. Sensorcaine is not recommended for intravenous regional anesthesia (Bier Block) (see WARNINGS). The routes of administration and indicated Sensorcaine concentrations are:. (See DOSAGE AND ADMINISTRATION for additional information.). Standard textbooks should be consulted to determine the accepted procedures and techniques for the administration of Sensorcaine.</IndicationAndUsage>
<Description>Sensorcaine ® (bupivacaine HCl) injections are sterile isotonic solutions that contain a local anesthetic agent with and without epinephrine (as bitartrate) 1:200,000 and are administered parenterally by injection. See INDICATIONS AND USAGE for specific uses. Solutions of bupivacaine HCl may be autoclaved if they do not contain epinephrine. Sensorcaine injections contain bupivacaine HCl which is chemically designated as 2-piperidinecarboxamide, 1-butyl-N-(2,6-dimethylphenyl)-, monohydrochloride, monohydrate and has the following structure:. Epinephrine is (-)-3,4-Dihydroxy-α [(methylamino)methyl] benzyl alcohol. It has the following structural formula:. The pKa of bupivacaine (8.1) is similar to that of lidocaine (7.86). However, bupivacaine possesses a greater degree of lipid solubility and is protein bound to a greater extent than lidocaine. Bupivacaine is related chemically and pharmacologically to the aminoacyl local anesthetics. It is a homologue of mepivacaine and is chemically related to lidocaine. All three of these anesthetics contain an amide linkage between the aromatic nucleus and the amino, or piperidine group. They differ in this respect from the procaine-type local anesthetics, which have an ester linkage.</Description>
</NDC>
<NDC>
<NDCCode>63323-203-20</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-203-20) / 15 mL in 1 VIAL (63323-203-01) </PackageDescription>
<NDC11Code>63323-0203-20</NDC11Code>
<ProductNDC>63323-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-203-26</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-203-26) / 15 mL in 1 VIAL (63323-203-41) </PackageDescription>
<NDC11Code>63323-0203-26</NDC11Code>
<ProductNDC>63323-203</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20160817</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/15mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160817</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials containing the equivalent of 750 mg of the base is equivalent to 0.51 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-221-10</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-221-10) / 10 mL in 1 VIAL (63323-221-01) </PackageDescription>
<NDC11Code>63323-0221-10</NDC11Code>
<ProductNDC>63323-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-221-16</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-221-16) / 10 mL in 1 VIAL (63323-221-41) </PackageDescription>
<NDC11Code>63323-0221-16</NDC11Code>
<ProductNDC>63323-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-221-38</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-221-38) > 10 mL in 1 VIAL (63323-221-33) </PackageDescription>
<NDC11Code>63323-0221-38</NDC11Code>
<ProductNDC>63323-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>Fresenius Kabi, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials containing the equivalent of 500 mg vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-221-48</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-221-48) > 10 mL in 1 VIAL (63323-221-43) </PackageDescription>
<NDC11Code>63323-0221-48</NDC11Code>
<ProductNDC>63323-221</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>Fresenius Kabi, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-20</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-20) / 20 mL in 1 VIAL (63323-284-01) </PackageDescription>
<NDC11Code>63323-0284-20</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20000920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-05-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg, 750 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*, 38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-26</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-26) / 20 mL in 1 VIAL (63323-284-42) </PackageDescription>
<NDC11Code>63323-0284-26</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20210503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base is equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is [3S-[3R*, 6S* (S*),7S*, 22S*, 23R*, 26R*, 36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-β-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]- benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-284-45</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-284-45) > 20 mL in 1 VIAL (63323-284-41) </PackageDescription>
<NDC11Code>63323-0284-45</NDC11Code>
<ProductNDC>63323-284</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171026</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204107</ApplicationNumber>
<LabelerName>Fresenius Kabi, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171026</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (ß-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin-structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection USP is a lyophilized powder for preparing intravenous (IV) infusions, in vials each containing the equivalent of 500 mg or 1 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopsis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S- [3 R*,6 S*( S*),7 S*,22 S*,23 R*,26 R*,36 S*,38a S*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-a-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22 H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1 H,16 H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C 66H 75Cl 2N 9O 24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:.</Description>
</NDC>
<NDC>
<NDCCode>63323-295-61</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-295-61) > 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0295-61</NDC11Code>
<ProductNDC>63323-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>63323-295-66</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-295-66) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0295-66</NDC11Code>
<ProductNDC>63323-295</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010717</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010717</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>63323-314-61</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-314-61) > 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0314-61</NDC11Code>
<ProductNDC>63323-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20041130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36- (iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>63323-314-66</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-314-66) / 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0314-66</NDC11Code>
<ProductNDC>63323-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20041130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062663</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin Hydrochloride for Injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin Hydrochloride for Injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin Hydrochloride for Injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin Hydrochloride for Injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin Hydrochloride for Injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin Hydrochloride for Injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Vancomycin Hydrochloride for Injection, USP and other antibacterial drugs, Vancomycin Hydrochloride for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infections.</IndicationAndUsage>
<Description>Vancomycin Hydrochloride for Injection, USP, is an off-white to buff-colored lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the. 10 g Pharmacy Bulk Package bottle, the pH of the solution is between 2.5 and 4.5. This product is oxygen sensitive. Vancomycin Hydrochloride for Injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION), AFTER RECONSTITUTION FURTHER DILUTION IS REQUIRED BEFORE USE. Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientalis). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino- 2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro- 2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl- 2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5- m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula:. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk. package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>63323-314-68</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (63323-314-68) > 100 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>63323-0314-68</NDC11Code>
<ProductNDC>63323-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204125</ApplicationNumber>
<LabelerName>Fresenius Kabi, LLC</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC], Glycopeptides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2019-02-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Vancomycin hydrochloride for injection, USP is indicated for the treatment of serious or severe infections caused by susceptible strains of methicillin-resistant (β-lactam-resistant) staphylococci. It is indicated for penicillin-allergic patients, for patients who cannot receive or who have failed to respond to other drugs, including the penicillins or cephalosporins, and for infections caused by vancomycin-susceptible organisms that are resistant to other antimicrobial drugs. Vancomycin hydrochloride for injection, USP is indicated for initial therapy when methicillin-resistant staphylococci are suspected, but after susceptibility data are available, therapy should be adjusted accordingly. Vancomycin hydrochloride for injection, USP is effective in the treatment of staphylococcal endocarditis. Its effectiveness has been documented in other infections due to staphylococci, including septicemia, bone infections, lower respiratory tract infections, skin and skin structure infections. When staphylococcal infections are localized and purulent, antibiotics are used as adjuncts to appropriate surgical measures. Vancomycin hydrochloride for injection, USP has been reported to be effective alone or in combination with an aminoglycoside for endocarditis caused by S. viridans or S. bovis. For endocarditis caused by enterococci (e.g., E. faecalis), vancomycin has been reported to be effective only in combination with an aminoglycoside. Vancomycin hydrochloride for injection, USP has been reported to be effective for the treatment of diphtheroid endocarditis. Vancomycin hydrochloride for injection, USP has been used successfully in combination with either rifampin, an aminoglycoside, or both in early-onset prosthetic valve endocarditis caused by S. epidermidis or diphtheroids. Specimens for bacteriologic cultures should be obtained in order to isolate and identify causative organisms and to determine their susceptibilities to vancomycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of vancomycin hydrochloride for injection, USP and other antibacterial drugs, vancomycin hydrochloride for injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. The parenteral form of vancomycin hydrochloride may be administered orally for treatment of antibiotic-associated pseudomembranous colitis produced by C. difficile and for staphylococcal enterocolitis. Parenteral administration of vancomycin hydrochloride alone is of unproven benefit for these indications. Vancomycin is not effective by the oral route for other types of infection.</IndicationAndUsage>
<Description>Vancomycin hydrochloride for injection, USP is a white, almost white, or tan lyophilized powder, for preparing intravenous (IV) infusions, in Pharmacy Bulk Package bottles containing the equivalent of 5 g or 10 g vancomycin base. 500 mg of the base are equivalent to 0.34 mmol. When reconstituted with Sterile Water for Injection to a concentration of 50 mg/mL for the 5 g Pharmacy Bulk Package bottle and 100 mg/mL for the 10 g Pharmacy Bulk Package bottle, a clear solution is achieved with the pH of the solution is between 2.5 and 4.5. Vancomycin hydrochloride for injection, USP should be administered intravenously in diluted solution (see DOSAGE AND ADMINISTRATION). Vancomycin is a tricyclic glycopeptide antibiotic derived from Amycolatopasis orientalis (formerly Nocardia orientals). The chemical name for vancomycin hydrochloride is 3S-[3R*,6S*(S*),7S*,22S*,23R*,26R*,36S*,38aS*]]-3-(2-Amino-2-oxoethyl)-44-[[2-O-(3-amino-2,3,6-trideoxy-3-C-methyl-α-L-lyxo-hexopyranosyl)-ß-D-glucopyranosyl]oxy]-10,19-dichloro-2,3,4,5,6,7,23,24,25,26,36,37,38,38a-tetradecahydro-7,22,28,30,32-pentahydroxy-6-[[4-methyl-2-(methylamino)-1-oxopentyl]amino]-2,5,24,38,39-pentaoxo-22H-8,11:18,21-dietheno-23,36-(iminomethano)-13,16:31,35-dimetheno-1H,16H-[1,6,9]oxadiazacyclohexadecino[4,5-m][10,2,16]-benzoxadiazacyclotetracosine-26-carboxylic acid, monohydrochloride. The molecular formula is C66H75Cl2N9O24 HCl and the molecular weight is 1,485.74. Vancomycin hydrochloride has the following structural formula. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package). AFTER RECONSTITUTION, FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>63323-360-19</NDCCode>
<PackageDescription>25 VIAL, PLASTIC in 1 TRAY (63323-360-19) / 10 mL in 1 VIAL, PLASTIC (63323-360-01) </PackageDescription>
<NDC11Code>63323-0360-19</NDC11Code>
<ProductNDC>63323-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>63323-360-59</NDCCode>
<PackageDescription>25 VIAL, PLASTIC in 1 TRAY (63323-360-59) / 50 mL in 1 VIAL, PLASTIC (63323-360-03) </PackageDescription>
<NDC11Code>63323-0360-59</NDC11Code>
<ProductNDC>63323-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>63323-360-61</NDCCode>
<PackageDescription>20 VIAL, PLASTIC in 1 TRAY (63323-360-61) / 100 mL in 1 VIAL, PLASTIC (63323-360-05) </PackageDescription>
<NDC11Code>63323-0360-61</NDC11Code>
<ProductNDC>63323-360</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Calcium Gluconate</ProprietaryName>
<NonProprietaryName>Calcium Gluconate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170615</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208418</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>CALCIUM GLUCONATE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Calcium Gluconate Injection is indicated for pediatric and adult patients for the treatment of acute symptomatic hypocalcemia.</IndicationAndUsage>
<Description>Calcium Gluconate Injection, USP is a sterile, preservative-free, nonpyrogenic, supersaturated solution of calcium gluconate, a form of calcium, for intravenous use. Calcium Gluconate is calcium D-gluconate (1:2) monohydrate. The structural formula is:. Molecular formula: C12H22CaO14 H2OMolecular weight: 448.39 Solubility in water: 3.5 g/100 mL at 25°C. Calcium Gluconate Injection, USP is available as 1,000 mg per 10 mL (100 mg per mL) or 5,000 mg per 50 mL (100 mg per mL) in a single-dose vial, or 10,000 mg per 100 mL (100 mg per mL) in a pharmacy bulk package. Each mL of Calcium Gluconate Injection, USP contains 100 mg of calcium gluconate (equivalent to 94 mg of calcium gluconate and 4.5 mg of calcium saccharate tetrahydrate), hydrochloric acid and/or sodium hydroxide for pH adjustment (6.0 to 8.2) and sterile water for injection, q.s. It contains no antimicrobial agent. Each mL of Calcium Gluconate Injection, USP contains 9.3 mg (0.465 mEq) of elemental calcium.</Description>
</NDC>
<NDC>
<NDCCode>63323-413-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 TRAY (63323-413-10) > 10 mL in 1 VIAL, MULTI-DOSE (63323-413-01) </PackageDescription>
<NDC11Code>63323-0413-10</NDC11Code>
<ProductNDC>63323-413</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203629</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.</IndicationAndUsage>
<Description>Neostigmine Methylsulfate Injection, USP, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>63323-413-36</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 TRAY (63323-413-36) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>63323-0413-36</NDC11Code>
<ProductNDC>63323-413</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203629</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.</IndicationAndUsage>
<Description>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>63323-415-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 TRAY (63323-415-10) > 10 mL in 1 VIAL, MULTI-DOSE (63323-415-01) </PackageDescription>
<NDC11Code>63323-0415-10</NDC11Code>
<ProductNDC>63323-415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203629</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.</IndicationAndUsage>
<Description>Neostigmine Methylsulfate Injection, USP, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection, USP is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>63323-415-36</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 TRAY (63323-415-36) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>63323-0415-36</NDC11Code>
<ProductNDC>63323-415</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Neostigmine Methylsulfate</ProprietaryName>
<NonProprietaryName>Neostigmine Methylsulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150108</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203629</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>NEOSTIGMINE METHYLSULFATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC], Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150108</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, is indicated for reversal of the effects of nondepolarizing neuromuscular blocking agents (NMBA) after surgery.</IndicationAndUsage>
<Description>Neostigmine Methylsulfate Injection, a cholinesterase inhibitor, has an empirical formula of C 13H 22N 2O 6S, a molecular weight of 334.39 g/mol and the following structural formula:. Neostigmine Methylsulfate Injection is formulated with neostigmine methylsulfate, a white crystalline powder, chemically designated as (m-hydroxyphenyl) trimethylammonium methylsulfate dimethylcarbamate. Neostigmine Methylsulfate Injection is available in two dosage strengths; 0.5 mg/mL, and 1 mg/mL in 10 mL multiple dose amber glass vials. The composition per mL is as follows. Phenol is added as a preservative. Acetic acid and/or sodium hydroxide may have been added for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>63323-517-74</NDCCode>
<PackageDescription>24 BAG in 1 CASE (63323-517-74) / 250 mL in 1 BAG (63323-517-01) </PackageDescription>
<NDC11Code>63323-0517-74</NDC11Code>
<ProductNDC>63323-517</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170824</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>10000</StrengthNumber>
<StrengthUnit>[USP'U]/100mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170824</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin sodium is indicated for: 1 Prophylaxis and treatment of venous thromboembolism and pulmonary embolism;, 2 Atrial fibrillation with embolization; , 3 Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation); , 4 Prevention of clotting in arterial and cardiac surgery; , 5 Prophylaxis and treatment of peripheral arterial embolism; , 6 Anticoagulant use in blood transfusions, extracorporeal circulation, and dialysis procedures. .</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, possessing anticoagulant properties. It is composed of polymers of alternating derivations of α-D-glucosamido (N-sulfated O-sulfated O-sulfated or N-acetylated) and O-sulfated uronic acid (α-L-iduronic acid or β-D-glucoronic acid). Structure of Heparin Sodium (representative subunits). Heparin Sodium in 0.45% Sodium Chloride Injection and Heparin Sodium in 5% Dextrose Injection are sterile, nonpyrogenic solutions prepared from heparin sodium (derived from porcine intestinal mucosa) for intravenous administration. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Heparin Sodium in 0.45% Sodium Chloride Injection, is available as follows. Each 100 mL contains heparin sodium 5,000 or 10,000 USP Units; sodium chloride, 0.45 g; edetate disodium, dihydrate, 0.0111 g added as a stabilizer and water for injection, q.s. Each liter contains the following electrolytes: Sodium 77 mEq and chloride 77 mEq; pH 5.0 to 7.5. The solution may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. Heparin Sodium in 5% Dextrose Injection, is available as follows. Each 100 mL contains heparin sodium 5,000 or 10,000 USP Units; dextrose hydrous, 5 g; citric acid anhydrous, 51 mg and sodium citrate dihydrate, 334 mg added as buffers; and sodium metabisulfite, 20 mg added as an antioxidant. Each liter contains the following electrolytes: Sodium 39 mEq and citrate 42 mEq; pH 5.0 to 7.5.</Description>
</NDC>
</NDCList>