RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-533-83</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (63323-533-83)  / 1 SYRINGE in 1 CELLO PACK (63323-533-01)  / .3 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0533-83</NDC11Code>
    <ProductNDC>63323-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190618</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin sodium is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness ( 1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism ( 1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism ( 1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) ( 1.3) , 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (  1.4)  .</IndicationAndUsage>
    <Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see  Dosage and Administration (2) and  How Supplied/Storage and Handling (16)] .</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-533-93</NDCCode>
    <PackageDescription>10 CELLO PACK in 1 CARTON (63323-533-93)  / 1 SYRINGE in 1 CELLO PACK (63323-533-13)  / .3 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0533-93</NDC11Code>
    <ProductNDC>63323-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20190618</StartMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>mg/.3mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-06</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190618</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Enoxaparin sodium is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
    <Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA.                    R1 = H or SO3Na and R2 = SO3Na or COCH3. Enoxaparin sodium injection 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
  </NDC>
  <NDC>
    <NDCCode>47335-533-83</NDCCode>
    <PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE (47335-533-83) </PackageDescription>
    <NDC11Code>47335-0533-83</NDC11Code>
    <ProductNDC>47335-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Tramadol Hydrochloride</ProprietaryName>
    <NonProprietaryName>Tramadol Hydrochloride</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20111230</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA091607</ApplicationNumber>
    <LabelerName>Sun Pharmaceutical Industries, Inc.</LabelerName>
    <SubstanceName>TRAMADOL HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>200</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CIV</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2025-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20111230</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Tramadol hydrochloride extended-release tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Use.  Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings], reserve opioid analgesics, including tramadol hydrochloride extended-release tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.  Tramadol hydrochloride extended-release tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
    <Description>Tramadol hydrochloride extended-release tablets, USP are an opioid agonist composed of a matrix delivery system with extended-release characteristics. The chemical name for tramadol hydrochloride, USP is (±)cis-2-[(dimethylamino) methyl]-1-(3 methoxyphenyl) cyclohexanol hydrochloride. Its structural formula is. The molecular weight of tramadol hydrochloride, USP is 299.8. Tramadol hydrochloride, USP is a white crystalline powder that is freely soluble in water and ethanol. Tramadol hydrochloride extended-release tablets, USP are for oral administration and contain 100 mg, 200 mg or 300 mg of tramadol hydrochloride, USP. The tablets are white in color. The inactive ingredients in the tablet are pregelatinized maize starch, hypromellose, mannitol, magnesium stearate, cellulose acetate and polyethylene glycol. Imprinting ink contains shellac glaze, iron oxide black, N-butyl alcohol, propylene glycol and ammonium hydroxide. Meets USP dissolution test 4.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-568-83</NDCCode>
    <PackageDescription>10 SYRINGE in 1 CARTON (63323-568-83)  &gt; .3 mL in 1 SYRINGE</PackageDescription>
    <NDC11Code>63323-0568-83</NDC11Code>
    <ProductNDC>63323-568</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Enoxaparin Sodium</ProprietaryName>
    <NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20150220</StartMarketingDate>
    <EndMarketingDate>20221130</EndMarketingDate>
    <MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
    <ApplicationNumber>NDA020164</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-04-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20150220</StartMarketingDatePackage>
    <EndMarketingDatePackage>20220331</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>46708-533-31</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (46708-533-31) </PackageDescription>
    <NDC11Code>46708-0533-31</NDC11Code>
    <ProductNDC>46708-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metolazone</ProprietaryName>
    <NonProprietaryName>Metolazone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213251</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>METOLAZONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure;, 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function.</IndicationAndUsage>
    <Description>Metolazone tablets, USP for oral administration contain 2.5, 5, or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C16H16ClN3O3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight 365.83. The structural formula is. Metolazone is insoluble in water, sparingly soluble in methanol, slightly soluble in ethyl acetate, very slightly soluble in methylene chloride. Inactive Ingredients: Microcrystalline cellulose, magnesium stearate and colorants 2.5 mg -D&amp;C Red No. 27 Aluminum Lake, 5 mg - FD&amp;C Blue No. 2 Aluminum Lake and 10 mg - D&amp;C Yellow No. 10 Aluminum Lake and FD&amp;C Yellow No. 6 Aluminum Lake. Metolazone tablets, USP meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>46708-533-91</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (46708-533-91) </PackageDescription>
    <NDC11Code>46708-0533-91</NDC11Code>
    <ProductNDC>46708-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metolazone</ProprietaryName>
    <NonProprietaryName>Metolazone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213251</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Limited</LabelerName>
    <SubstanceName>METOLAZONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure;, 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function.</IndicationAndUsage>
    <Description>Metolazone tablets, USP for oral administration contain 2.5, 5, or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C16H16ClN3O3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight 365.83. The structural formula is. Metolazone is insoluble in water, sparingly soluble in methanol, slightly soluble in ethyl acetate, very slightly soluble in methylene chloride. Inactive Ingredients: Microcrystalline cellulose, magnesium stearate and colorants 2.5 mg -D&amp;C Red No. 27 Aluminum Lake, 5 mg - FD&amp;C Blue No. 2 Aluminum Lake and 10 mg - D&amp;C Yellow No. 10 Aluminum Lake and FD&amp;C Yellow No. 6 Aluminum Lake. Metolazone tablets, USP meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>50242-210-83</NDCCode>
    <PackageDescription>1 BOTTLE in 1 CARTON (50242-210-83)  / 60 CAPSULE in 1 BOTTLE</PackageDescription>
    <NDC11Code>50242-0210-83</NDC11Code>
    <ProductNDC>50242-210</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gavreto</ProprietaryName>
    <NonProprietaryName>Pralsetinib</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20210701</StartMarketingDate>
    <EndMarketingDate>20260930</EndMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA213721</ApplicationNumber>
    <LabelerName>Genentech, Inc.</LabelerName>
    <SubstanceName>PRALSETINIB</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Kinase Inhibitor [EPC], Rearranged during Transfection (RET) Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-10-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <StartMarketingDatePackage>20210701</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260930</EndMarketingDatePackage>
    <SamplePackage>Y</SamplePackage>
    <IndicationAndUsage>GAVRETO is a kinase inhibitor indicated for treatment of: 1 Adult patients with metastatic rearranged during transfection (RET) fusion-positive non-small cell lung cancer as detected by an FDA approved test (NSCLC). (1.1), 2 Adult and pediatric patients 12 years of age and older with advanced or metastatic RET fusion-positive thyroid cancer who require systemic therapy and who are radioactive iodine-refractory (if radioactive iodine is appropriate).This indication is approved under accelerated approval based on overall response rate and duration of response. Continued approval for this indication may be contingent upon verification and description of clinical benefit in confirmatory trial(s). (1.2).</IndicationAndUsage>
    <Description>Pralsetinib is an oral receptor tyrosine kinase inhibitor. The chemical name for pralsetinib is (cis)-N-((S)-1-(6-(4-fluoro-1H-pyrazol-1-yl)pyridin-3-yl)ethyl)-1-methoxy-4-(4-methyl-6-(5-methyl-1H-pyrazol-3-ylamino)pyrimidin-2-yl)cyclohexanecarboxamide. The molecular formula for pralsetinib is C27H32FN9O2, and the molecular weight is 533.61 g/mol. Pralsetinib has the following structure. The solubility of pralsetinib in aqueous media decreases over the range pH 1.99 to pH 7.64 from 0.880 mg/mL to &lt; 0.001 mg/mL, indicating a decrease in solubility with increasing pH. GAVRETO (pralsetinib) is supplied for oral use as immediate release hydroxypropyl methylcellulose (HPMC) hard capsules containing 100 mg pralsetinib. The capsules also contain inactive ingredients. citric acid, hydroxypropyl methylcellulose (HPMC), magnesium stearate, microcrystalline cellulose (MCC), pregelatinized starch and sodium bicarbonate. The capsule shell consists of FD&amp;C Blue #1 (Brilliant Blue FCF), hypromellose and titanium dioxide. The white printing ink contains butyl alcohol, dehydrated alcohol, isopropyl alcohol, potassium hydroxide, propylene glycol, purified water, shellac, strong ammonia solution and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-533-31</NDCCode>
    <PackageDescription>100 TABLET in 1 BOTTLE (62332-533-31) </PackageDescription>
    <NDC11Code>62332-0533-31</NDC11Code>
    <ProductNDC>62332-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metolazone</ProprietaryName>
    <NonProprietaryName>Metolazone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213251</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>METOLAZONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure;, 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function.</IndicationAndUsage>
    <Description>Metolazone tablets, USP for oral administration contain 2.5, 5, or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C16H16ClN3O3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight 365.83. The structural formula is. Metolazone is insoluble in water,  sparingly soluble in methanol, slightly soluble in ethyl acetate, very slightly soluble in methylene chloride. Inactive Ingredients: Microcrystalline cellulose, magnesium stearate and colorants 2.5 mg -D&amp;C Red No. 27 Aluminum Lake, 5 mg - FD&amp;C Blue No. 2 Aluminum Lake and 10 mg - D&amp;C Yellow No. 10 Aluminum Lake and FD&amp;C Yellow No. 6 Aluminum Lake. Metolazone tablets, USP meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>62332-533-91</NDCCode>
    <PackageDescription>1000 TABLET in 1 BOTTLE (62332-533-91) </PackageDescription>
    <NDC11Code>62332-0533-91</NDC11Code>
    <ProductNDC>62332-533</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Metolazone</ProprietaryName>
    <NonProprietaryName>Metolazone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20201202</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA213251</ApplicationNumber>
    <LabelerName>Alembic Pharmaceuticals Inc.</LabelerName>
    <SubstanceName>METOLAZONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Increased Diuresis [PE], Thiazide-like Diuretic [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-05-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20201202</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Metolazone tablets are indicated for the treatment of salt and water retention including: 1 edema accompanying congestive heart failure;, 2 edema accompanying renal diseases, including the nephrotic syndrome and states of diminished renal function.</IndicationAndUsage>
    <Description>Metolazone tablets, USP for oral administration contain 2.5, 5, or 10 mg of metolazone, USP, a diuretic/saluretic/antihypertensive drug of the quinazoline class. Metolazone has the molecular formula C16H16ClN3O3S, the chemical name 7-chloro-1, 2, 3, 4-tetrahydro-2-methyl-3-(2-methylphenyl)-4-oxo-6-quinazolinesulfonamide, and a molecular weight 365.83. The structural formula is. Metolazone is insoluble in water,  sparingly soluble in methanol, slightly soluble in ethyl acetate, very slightly soluble in methylene chloride. Inactive Ingredients: Microcrystalline cellulose, magnesium stearate and colorants 2.5 mg -D&amp;C Red No. 27 Aluminum Lake, 5 mg - FD&amp;C Blue No. 2 Aluminum Lake and 10 mg - D&amp;C Yellow No. 10 Aluminum Lake and FD&amp;C Yellow No. 6 Aluminum Lake. Metolazone tablets, USP meets USP Dissolution Test 3.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-346-10</NDCCode>
    <PackageDescription>25 VIAL in 1 CARTON (63323-346-10)  / 1 INJECTION, POWDER, FOR SOLUTION in 1 VIAL (63323-346-01) </PackageDescription>
    <NDC11Code>63323-0346-10</NDC11Code>
    <ProductNDC>63323-346</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ceftriaxone</ProprietaryName>
    <NonProprietaryName>Ceftriaxone</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20110620</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065329</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CEFTRIAXONE SODIUM</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>g/1</StrengthUnit>
    <Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-10-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20110620</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Before instituting treatment with Ceftriaxone for Injection, USP, appropriate specimens should be obtained for isolation of the causative organism and for determination of its susceptibility to the drug. Therapy may be instituted prior to obtaining results of susceptibility testing. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Ceftriaxone for Injection, USP and other antibacterial drugs, Ceftriaxone for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Ceftriaxone for Injection, USP is indicated for the treatment of the following infections when caused by susceptible organisms:Lower Respiratory Tract Infections  caused by Streptococcus pneumoniae, Staphylococcus aureus, Haemophilus influenzae, Haemophilus parainfluenzae, Klebsiella pneumoniae, Escherichia coli, Enterobacter aerogenes, Proteus mirabilis or Serratia marcescens.Acute Bacterial otitis Media  caused by Streptococcus pneumoniae, Haemophilus influenzae (including beta-lactamase producing strains) or Moraxella catarrhalis (including beta-lactamase producing strains). NOTE: In one study lower clinical cure rates were observed with a single dose of Ceftriaxone for Injection, USP compared to 10 days of oral therapy. In a second study comparable cure rates were observed between single dose Ceftriaxone for Injection, USP and the comparator. The potentially lower clinical cure rate of Ceftriaxone for Injection, USP should be balanced against the potential advantages of parenteral therapy (see CLINICAL STUDIES).Skin and Skin Structure Infections  caused by Staphylococcus aureus, Staphylococcus epidermidis, Streptococcus pyogenes, Viridans group  streptococci, Escherichia coli, Enterobacter cloacae, Klebsiella oxytoca, Klebsiella pneumoniae, Proteus mirabilis, Morganella morganii,* Pseudomonas aeruginosa, Serratia marcescens, Acinetobacter calcoaceticus, Bacteroides fragilis* or Peptostreptococcus species.Urinary Tract Infections  (complicated and uncomplicated) caused by Escherichia coli, Proteus mirabilis, Proteus vulgaris, Morganella morganii or Klebsiella pneumoniae.Uncomplicated Gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including both penicillinase- and nonpenicillinase-producing strains, and pharyngeal gonorrhea caused by nonpenicillinase-producing strains of Neisseria gonorrhoeae.Pelvic Inflammatory Disease caused by Neisseria gonorrhoeae. Ceftriaxone for Injection, USP like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and Chlamydia trachomatis is one of the suspected pathogens, appropriate antichlamydial coverage should be added.Bacterial Septicemia  caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Haemophilus influenzae or Klebsiella pneumoniae.Bone and Joint Infections caused by Staphylococcus aureus, Streptococcus pneumoniae, Escherichia coli, Proteus mirabilis, Klebsiella pneumoniae or Enterobacter species.Intra-Abdominal infections caused by Escherichia coli, Klebsiella pneumoniae, Bacteroides fragilis, Clostridium species (Note: most strains of Clostridium difficile are resistant) or Peptostreptococcus species.Meningitis caused by Haemophilus influenzae, Neisseria meningitidis or Streptococcus pneumoniae. Ceftriaxone for Injection, USP has also been used successfully in a limited number of cases of meningitis and shunt infection caused by Staphylococcus epidermidis* and Escherichia coli*.*Efficacy for this organism in this organ system was studied in fewer than ten infections.Surgical Prophilaxis: The preoperative administration of a single 1 g dose of Ceftriaxone for Injection, USP may reduce the incidence of postoperative infections in patients undergoing surgical procedures classified as contaminated or potentially contaminated (e.g., vaginal or abdominal hysterectomy or cholecystectomy for chronic calculous cholecystitis in high-risk patients, such as those over 70 years of age, with acute cholecystitis not requiring therapeutic antimicrobials, obstructive jaundice or common duct bile stones) and in surgical patients for whom infection at the operative site would present serious risk (e.g., during coronary artery bypass surgery). Although Ceftriaxone for Injection, USP has been shown to have been as effective as cefazolin in the prevention of infection following coronary artery bypass surgery, no placebo-controlled trials have been conducted to evaluate any cephalosporin antibiotic in the prevention of infection following coronary artery bypass surgery. When administered prior to surgical procedures for which it is indicated, a single 1 g dose of Ceftriaxone for Injection, USP provides protection from most infections due to susceptible organisms throughout the course of the procedure.</IndicationAndUsage>
    <Description>Ceftriaxone for Injection, USP is a sterile, semisynthetic, broad-spectrum cephalosporin antibiotic for intravenous or intramuscular administration. Ceftriaxone sodium is (6R,7R)-7-[2-(2-Amino-4-thiazolyl)glyoxylamido]-8-oxo- 3-[[(1,2,5,6-tetrahydro-2-methyl-5,6-dioxo-as-triazin-3-yl)thio]methyl]-5-thia-1-azabicyclo[4.2.0]oct-2-ene-2-carboxylic acid, 72-(Z)-(O-methyloxime), disodium salt, sesquaterhydrate. The structural formula of ceftriaxone sodium is. C18H16N8Na2O7S33.5H2O                                                  M.W. 661.60Ceftriaxone for Injection, USP is a white to yellowish-orange crystalline powder which is readily soluble in water, sparingly soluble in methanol and very slightly soluble in ethanol. The pH of a 1% aqueous solution is approximately 6.7. The color of Ceftriaxone for Injection, USP solutions ranges from light yellow to amber, depending on the length of storage, concentration and diluent used.  Ceftriaxone for Injection, USP contains approximately 83 mg (3.6 mEq) of sodium per gram of ceftriaxone activity.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-451-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-451-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-451-00) </PackageDescription>
    <NDC11Code>63323-0451-01</NDC11Code>
    <ProductNDC>63323-451</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], and persist over the course of therapy, reserve opioid analgesics, including Morphine Sulfate injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate, USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-452-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-452-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-452-00) </PackageDescription>
    <NDC11Code>63323-0452-01</NDC11Code>
    <ProductNDC>63323-452</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>2</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], and persist over the course of therapy, reserve opioid analgesics, including Morphine Sulfate injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate, USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-454-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-454-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-454-00) </PackageDescription>
    <NDC11Code>63323-0454-01</NDC11Code>
    <ProductNDC>63323-454</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Active</Status>
    <LastUpdate>2026-09-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration [see Warnings and Precautions (5.1)], and persist over the course of therapy, reserve opioid analgesics, including Morphine Sulfate injection, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist. Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate. The molecular weight is 758.83. Its molecular formula is (C17H19NO3)2  H2SO4  5H2O and it has the following chemical structure. Morphine sulfate is a fine white powder. When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light. It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate, USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection. Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-455-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-455-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-455-00) </PackageDescription>
    <NDC11Code>63323-0455-01</NDC11Code>
    <ProductNDC>63323-455</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve Morphine Sulfate Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist.  Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate.  The molecular weight is 758.83.  Its molecular formula is (C 17H 19NO 3) 2  H 2SO 4  5H 2O and it has the following chemical structure:. Morphine sulfate is a fine white powder.  When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light.  It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include:. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection.  Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-458-01</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 BOX (63323-458-01)  / 1 mL in 1 VIAL, SINGLE-DOSE (63323-458-00) </PackageDescription>
    <NDC11Code>63323-0458-01</NDC11Code>
    <ProductNDC>63323-458</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Morphine Sulfate</ProprietaryName>
    <NonProprietaryName>Morphine Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20180410</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA204223</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MORPHINE SULFATE</SubstanceName>
    <StrengthNumber>8</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
    <DEASchedule>CII</DEASchedule>
    <Status>Deprecated</Status>
    <LastUpdate>2025-03-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180410</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Morphine Sulfate Injection is indicated for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Limitations of Use. Because of the risks of addiction, abuse, and misuse with opioids, even at recommended doses [see Warnings and Precautions (5.1)], reserve Morphine Sulfate Injection for use in patients for whom alternative treatment options [e.g., non-opioid analgesics or opioid combination products]: : 1 Have not been tolerated, or are not expected to be tolerated,, 2 Have not provided adequate analgesia, or are not expected to provide adequate analgesia.</IndicationAndUsage>
    <Description>Morphine sulfate is an opioid agonist.  Morphine Sulfate Injection, USP is available as a sterile, nonpyrogenic solution of morphine sulfate, free of antioxidants and preservatives in single-dose vials for intravenous and intramuscular administration. The chemical name for Morphine sulfate is 7,8-Didehydro-4,5-epoxy-17-methyl-(5α,6α)-morphinan-3,6 α-diol sulfate (2: 1) (salt), pentahydrate.  The molecular weight is 758.83.  Its molecular formula is (C 17H 19NO 3) 2  H 2SO 4  5H 2O and it has the following chemical structure:. Morphine sulfate is a fine white powder.  When exposed to air it gradually loses water of hydration, and darkens on prolonged exposure to light.  It is soluble in water and ethanol at room temperature. Each milliliter of sterile solution contains 2 mg (equivalent to 1.75 mg Morphine), 4 mg (equivalent to 3.50 mg Morphine), 5 mg (equivalent to 4.37 mg Morphine), 8 mg (equivalent to 6.99 mg Morphine) or 10 mg (equivalent to 8.73 mg Morphine) of Morphine Sulfate USP in 1 mL total volume of water for injection solution with inactive ingredients. The inactive ingredients in Morphine Sulfate Injection, USP include:. Edetate disodium 0.2 mg; citric acid 0.4 mg; sodium chloride to adjust isotonicity and water for injection.  Hydrochloric acid and/or sodium hydroxide may be added to adjust pH.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-972-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-972-10)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0972-10</NDC11Code>
    <ProductNDC>63323-972</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fosaprepitant</ProprietaryName>
    <NonProprietaryName>Fosaprepitant</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190905</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206197</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>FOSAPREPITANT DIMEGLUMINE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/5mL</StrengthUnit>
    <Pharm_Classes>Cytochrome P450 2C9 Inducers [MoA], Cytochrome P450 3A4 Inducers [MoA], Cytochrome P450 3A4 Inhibitors [MoA], Neurokinin 1 Antagonists [MoA], Substance P/Neurokinin-1 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-07-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190905</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fosaprepitant for injection, in combination with other antiemetic agents, is indicated in adults and pediatric patients 6 months of age and older for the prevention of: : 1 acute and delayed nausea and vomiting associated with initial and repeat courses of highly emetogenic cancer chemotherapy (HEC) including high-dose cisplatin. , 2 delayed nausea and vomiting associated with initial and repeat courses of moderately emetogenic cancer chemotherapy (MEC). .</IndicationAndUsage>
    <Description>Fosaprepitant for injection is a sterile, lyophilized formulation containing fosaprepitant dimeglumine, a prodrug of aprepitant, a substance P/neurokinin-1 (NK1) receptor antagonist, an antiemetic agent, chemically described as 1-Deoxy-1-(methylamino)-D-glucitol[3-[[(2R,3S)-2-[(1R)-1-[3,5-bis (trifluoromethyl)phenyl]ethoxy]-3-(4-fluorophenyl)-4-morpholinyl]methyl]-2,5-dihydro-5-oxo-1H-1,2,4-triazol-1-yl]phosphonate (2:1) (salt). Its empirical formula is C23H22F7N4O6P · 2(C7H17NO5) and its structural formula is:. Fosaprepitant dimeglumine is a white to off-white amorphous powder with a molecular weight of 1004.83. It is freely soluble in water. Each vial of Fosaprepitant for injection for administration as an intravenous infusion contains 150 mg of fosaprepitant (equivalent to 245.3 mg of fosaprepitant dimeglumine) and the following inactive ingredients: edetate disodium (18.8 mg), polysorbate 80 (75 mg), lactose anhydrous (375 mg), sodium hydroxide and/or hydrochloric acid (for pH adjustment).</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2576-05</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2576-05)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2576-05</NDC11Code>
    <ProductNDC>0013-2576</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240812</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2576-91</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2576-91)  / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2576-91</NDC11Code>
    <ProductNDC>0013-2576</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19970217</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260831</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2586-10</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2586-10)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2586-10</NDC11Code>
    <ProductNDC>0013-2586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240311</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2586-91</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2586-91)  / 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2586-91</NDC11Code>
    <ProductNDC>0013-2586</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-09-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19970217</StartMarketingDatePackage>
    <EndMarketingDatePackage>20260831</EndMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2596-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2596-20)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2596-20</NDC11Code>
    <ProductNDC>0013-2596</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20240311</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0013-2596-91</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (0013-2596-91)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>00013-2596-91</NDC11Code>
    <ProductNDC>0013-2596</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idamycin Pfs</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>19970217</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA050734</ApplicationNumber>
    <LabelerName>Pfizer Laboratories Div Pfizer Inc</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-04-17</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19970217</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>IDAMYCIN PFS is indicated for the treatment of adult patients with acute myeloid leukemia (AML) as a component of a combination chemotherapy regimen.</IndicationAndUsage>
    <Description>IDAMYCIN PFS contains idarubicin hydrochloride, which is an anthracycline topoisomerase inhibitor. Chemically, idarubicin hydrochloride is 5, 12-Naphthacenedione, 9-acetyl-7-[(3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranosyl)oxy]-7,8,9,10-tetrahydro-6,9,11-trihydroxyhydrochloride, (7S-cis). The structural formula is as follows. C26 H27 NO9 ∙HCl        M.W. 533.96. IDAMYCIN PFS injection, for intravenous use, is a sterile, orange-red, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg), and 20 mL (20 mg) single-dose only vials. Each mL contains idarubicin hydrochloride, USP 1 mg (equivalent to 0.93 mg idarubicin free base) and the following inactive ingredients: Glycerin, USP 25 mg and Water for Injection, USP q.s. Hydrochloric Acid, NF is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-3145-01</NDCCode>
    <PackageDescription>100 CAPSULE in 1 BOTTLE (0143-3145-01)</PackageDescription>
    <NDC11Code>00143-3145-01</NDC11Code>
    <ProductNDC>0143-3145</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Ephedrine Sulfate</ProprietaryName>
    <NonProprietaryName>Ephedrine Sulfate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19930901</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
    <ApplicationNumber>part310.533</ApplicationNumber>
    <LabelerName>West-ward Pharmaceutical Corp</LabelerName>
    <SubstanceName>EPHEDRINE SULFATE</SubstanceName>
    <StrengthNumber>25</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>0143-9217-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 BOX (0143-9217-01)  / 5 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00143-9217-01</NDC11Code>
    <ProductNDC>0143-9217</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065275</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Idarubicin Hydrochloride injection, USP in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
    <Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride is (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside, hydrochloride. The structural formula is as follows. C26H27NO9HCl. M.W. 533.95. Idarubicin Hydrochloride Injection, USP​ is a sterile, red-orange, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-use-only vials. Each mL contains idarubicin hydrochloride 1 mg and the following inactive ingredients: glycerin 25 mg and water for injection q.s. Hydrochloric acid is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9218-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 BOX (0143-9218-01)  / 10 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00143-9218-01</NDC11Code>
    <ProductNDC>0143-9218</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065275</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Idarubicin Hydrochloride injection, USP in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
    <Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride is (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside, hydrochloride. The structural formula is as follows. C26H27NO9HCl. M.W. 533.95. Idarubicin Hydrochloride Injection, USP​ is a sterile, red-orange, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-use-only vials. Each mL contains idarubicin hydrochloride 1 mg and the following inactive ingredients: glycerin 25 mg and water for injection q.s. Hydrochloric acid is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9219-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 BOX (0143-9219-01)  / 20 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00143-9219-01</NDC11Code>
    <ProductNDC>0143-9219</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170130</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065275</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170130</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Idarubicin Hydrochloride injection, USP in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
    <Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride is (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside, hydrochloride. The structural formula is as follows. C26H27NO9HCl. M.W. 533.95. Idarubicin Hydrochloride Injection, USP​ is a sterile, red-orange, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-use-only vials. Each mL contains idarubicin hydrochloride 1 mg and the following inactive ingredients: glycerin 25 mg and water for injection q.s. Hydrochloric acid is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9289-01</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0143-9289-01)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00143-9289-01</NDC11Code>
    <ProductNDC>0143-9289</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20200421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203723</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
    <Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3                        MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9290-01</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0143-9290-01)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00143-9290-01</NDC11Code>
    <ProductNDC>0143-9290</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20200421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203723</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>20</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
    <Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3                        MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9291-01</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (0143-9291-01)  / 5 mL in 1 VIAL</PackageDescription>
    <NDC11Code>00143-9291-01</NDC11Code>
    <ProductNDC>0143-9291</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Estradiol Valerate</ProprietaryName>
    <NonProprietaryName>Estradiol Valerate</NonProprietaryName>
    <DosageFormName>INJECTION</DosageFormName>
    <RouteName>INTRAMUSCULAR</RouteName>
    <StartMarketingDate>20200421</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA203723</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>ESTRADIOL VALERATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Estradiol Congeners [CS], Estrogen Receptor Agonists [MoA], Estrogen [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Estradiol Valerate Injection, USP is indicated in the: : 1 Treatment of moderate to severe vasomotor symptoms associated with the menopause. , 2 Treatment of moderate to severe symptoms of vulvar and vaginal atrophy associated with the menopause. When prescribing solely for the treatment of symptoms of vulvar and vaginal atrophy, topical vaginal products should be considered. , 3 Treatment of hypoestrogenism due to hypogonadism, castration or primary ovarian failure. , 4 Treatment of advanced androgen-dependent carcinoma of the prostate (for palliation only). .</IndicationAndUsage>
    <Description>Estradiol Valerate Injection, USP contains estradiol valerate, a long-acting estrogen in sterile oil solutions for intramuscular use. These solutions are clear, colorless to pale yellow. Formulations (per mL): 10 mg Estradiol Valerate, USP in a vehicle containing 5 mg Chlorobutanol, NF (chloral derivative/preservative) and 895 mg Sesame Oil, NF; 20 mg Estradiol Valerate, USP in a vehicle containing 224 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF (preservative), and 726 mg Castor Oil, USP; 40 mg Estradiol Valerate, USP in a vehicle containing 447 mg Benzyl Benzoate, USP, 20 mg Benzyl Alcohol, NF, and 533 mg Castor Oil, USP. Estradiol Valerate, USP is designated chemically as estra-1,3,5(10)-triene-3, 17-diol(17β)-, 17-pentanoate. Graphic formula:. C23H32O3                        MW 356.50.</Description>
  </NDC>
  <NDC>
    <NDCCode>0143-9306-01</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 BOX (0143-9306-01)  / 5 mL in 1 VIAL, GLASS</PackageDescription>
    <NDC11Code>00143-9306-01</NDC11Code>
    <ProductNDC>0143-9306</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Idarubicin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Idarubicin Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180112</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065275</ApplicationNumber>
    <LabelerName>Hikma Pharmaceuticals USA Inc.</LabelerName>
    <SubstanceName>IDARUBICIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>1</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Anthracycline Topoisomerase Inhibitor [EPC], Anthracyclines [CS], Topoisomerase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180112</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Idarubicin Hydrochloride injection, USP in combination with other approved antileukemic drugs is indicated for the treatment of acute myeloid leukemia (AML) in adults. This includes French-American-British (FAB) classifications M1 through M7.</IndicationAndUsage>
    <Description>Idarubicin Hydrochloride Injection, USP contains idarubicin hydrochloride and is a sterile, semi-synthetic, preservative-free solution (PFS) antineoplastic anthracycline for intravenous use. Chemically, idarubicin hydrochloride is (1S,3S)-3-Acetyl-1,2,3,4,6,11-hexahydro-3,5,12-trihydroxy-6,11-dioxo-1-naphthacenyl 3-amino-2,3,6-trideoxy-α-L-lyxo-hexopyranoside, hydrochloride. The structural formula is as follows. C26H27NO9HCl. M.W. 533.95. Idarubicin Hydrochloride Injection, USP is a sterile, red-orange, isotonic parenteral preservative-free solution, available in 5 mL (5 mg), 10 mL (10 mg) and 20 mL (20 mg) single-use-only vials. Each mL contains idarubicin hydrochloride 1 mg and the following inactive ingredients: glycerin 25 mg and water for injection q.s. Hydrochloric acid is used to adjust the pH to a target of 3.5.</Description>
  </NDC>
</NDCList>