{
"NDC": [
{
"NDCCode": "63323-559-93",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63323-559-93) / 1 SYRINGE in 1 BLISTER PACK (63323-559-21) / .3 mL in 1 SYRINGE",
"NDC11Code": "63323-0559-93",
"ProductNDC": "63323-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190423",
"SamplePackage": "N"
},
{
"NDCCode": "63323-559-65",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (63323-559-65) / 1 SYRINGE in 1 BLISTER PACK (63323-559-63) / .3 mL in 1 SYRINGE",
"NDC11Code": "63323-0559-65",
"ProductNDC": "63323-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190423",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078990",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-04-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190423",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "63323-286-95",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-286-95) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-93) ",
"NDC11Code": "63323-0286-95",
"ProductNDC": "63323-286",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "20090804",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20090804",
"SamplePackage": "N",
"IndicationAndUsage": "NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "63323-322-93",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-322-93) > 20 mL in 1 VIAL, SINGLE-DOSE (63323-322-21) ",
"NDC11Code": "63323-0322-93",
"ProductNDC": "63323-322",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Imipenem And Cilastatin",
"NonProprietaryName": "Imipenem And Cilastatin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090577",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "IMIPENEM; CILASTATIN SODIUM",
"StrengthNumber": "500; 500",
"StrengthUnit": "mg/20mL; mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120103",
"SamplePackage": "N",
"IndicationAndUsage": "Imipenem and Cilastatin for Injection, USP for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: : 1 Lower respiratory tract infections. ( 1.1) , 2 Urinary tract infections. ( 1.2) , 3 Intra-abdominal infections. ( 1.3) , 4 Gynecologic infections. ( 1.4) , 5 Bacterial septicemia. ( 1.5) , 6 Bone and joint infections. ( 1.6) , 7 Skin and skin structure infections. ( 1.7) , 8 Endocarditis. ( 1.8) .",
"Description": "Imipenem and Cilastatin for Injection, USP (I.V.) (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. Imipenem and Cilastatin for Injection, USP (I.V.) is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C 12H 17N 3O 4SH 2O, and its structural formula is:. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C 16H 25N 2O 5SNa, and its structural formula is:. Imipenem and Cilastatin for Injection, USP (I.V.) is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed. [see How Supplied/ Storage and Handling ( 16.1).] Each Imipenem and Cilastatin for Injection, USP (I.V.) 250 mg/250 mg vial contains imipenem USP 250 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 250 mg cilastatin and each 500 mg/500 mg vial contains imipenem USP 500 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 500 mg cilastatin. In addition, the 250 mg/250 mg vial contains 10 mg of sodium bicarbonate and the 500 mg/500 mg vial contains 20 mg of sodium bicarbonate. The sodium content of the 250 mg/250 mg vial is 18.8 mg (0.8 mEq) and the sodium content for the 500 mg/500 mg vial is 37.5 mg (1.6 mEq). Solutions of Imipenem and Cilastatin for Injection, USP (I.V.) range from colorless to yellow. Variations of color within this range do not affect the potency of the product."
},
{
"NDCCode": "63323-349-93",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-349-93) > 20 mL in 1 VIAL, SINGLE-DOSE (63323-349-21) ",
"NDC11Code": "63323-0349-93",
"ProductNDC": "63323-349",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Imipenem And Cilastatin",
"NonProprietaryName": "Imipenem And Cilastatin Sodium",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20120103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090577",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "IMIPENEM; CILASTATIN SODIUM",
"StrengthNumber": "250; 250",
"StrengthUnit": "mg/20mL; mg/20mL",
"Pharm_Classes": "Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20120103",
"SamplePackage": "N",
"IndicationAndUsage": "Imipenem and Cilastatin for Injection, USP for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: : 1 Lower respiratory tract infections. ( 1.1) , 2 Urinary tract infections. ( 1.2) , 3 Intra-abdominal infections. ( 1.3) , 4 Gynecologic infections. ( 1.4) , 5 Bacterial septicemia. ( 1.5) , 6 Bone and joint infections. ( 1.6) , 7 Skin and skin structure infections. ( 1.7) , 8 Endocarditis. ( 1.8) .",
"Description": "Imipenem and Cilastatin for Injection, USP (I.V.) (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. Imipenem and Cilastatin for Injection, USP (I.V.) is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C 12H 17N 3O 4SH 2O, and its structural formula is:. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C 16H 25N 2O 5SNa, and its structural formula is:. Imipenem and Cilastatin for Injection, USP (I.V.) is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed. [see How Supplied/ Storage and Handling ( 16.1).] Each Imipenem and Cilastatin for Injection, USP (I.V.) 250 mg/250 mg vial contains imipenem USP 250 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 250 mg cilastatin and each 500 mg/500 mg vial contains imipenem USP 500 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 500 mg cilastatin. In addition, the 250 mg/250 mg vial contains 10 mg of sodium bicarbonate and the 500 mg/500 mg vial contains 20 mg of sodium bicarbonate. The sodium content of the 250 mg/250 mg vial is 18.8 mg (0.8 mEq) and the sodium content for the 500 mg/500 mg vial is 37.5 mg (1.6 mEq). Solutions of Imipenem and Cilastatin for Injection, USP (I.V.) range from colorless to yellow. Variations of color within this range do not affect the potency of the product."
},
{
"NDCCode": "63323-533-93",
"PackageDescription": "10 CELLO PACK in 1 CARTON (63323-533-93) / 1 SYRINGE in 1 CELLO PACK (63323-533-13) / .3 mL in 1 SYRINGE",
"NDC11Code": "63323-0533-93",
"ProductNDC": "63323-533",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20190618",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020164",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "30",
"StrengthUnit": "mg/.3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190618",
"SamplePackage": "N",
"IndicationAndUsage": "Enoxaparin sodium is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).",
"Description": "Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Enoxaparin sodium injection 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)]."
},
{
"NDCCode": "63323-565-93",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 CARTON (63323-565-93) > 3 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "63323-0565-93",
"ProductNDC": "63323-565",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Enoxaparin Sodium",
"NonProprietaryName": "Enoxaparin Sodium",
"DosageFormName": "INJECTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20150315",
"EndMarketingDate": "20200731",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA020164",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ENOXAPARIN SODIUM",
"StrengthNumber": "300",
"StrengthUnit": "mg/3mL",
"Pharm_Classes": "Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-08-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20150315",
"EndMarketingDatePackage": "20200731",
"SamplePackage": "N"
},
{
"NDCCode": "63323-574-93",
"PackageDescription": "3 CARTON in 1 BOX (63323-574-93) / 1 SYRINGE in 1 CARTON / 3 mL in 1 SYRINGE",
"NDC11Code": "63323-0574-93",
"ProductNDC": "63323-574",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Icatibant",
"NonProprietaryName": "Icatibant",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20201115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208317",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ICATIBANT ACETATE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Bradykinin B2 Receptor Antagonist [EPC], Bradykinin B2 Receptor Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20201115",
"SamplePackage": "N",
"IndicationAndUsage": "Icatibant injection is indicated for the treatment of acute attacks of hereditary angioedema (HAE) in adults 18 years of age and older.",
"Description": "Icatibant is a synthetic decapeptide with five non-proteinogenic amino acids. The chemical structure of icatibant acetate is presented in Figure 1. Figure 1 Chemical Structure. Chemical name: D-Arginyl-L-arginyl-L-prolyl-L[(4R)-4-hydroxyprolyl]-glycyl-L[3-(2-thienyl)alanyl]-L-seryl-D-(1,2,3,4-tetrahydroisoquinolin-3-ylcarbonyl)-L[(3aS,7aS)-octahydroindol-2-ylcarbonyl]-L-arginine, acetate salt. Icatibant injection is provided as a sterile, isotonic, and buffered solution of icatibant acetate in a single-dose, prefilled syringe for subcutaneous administration. Each mL of the solution contains 10 mg of icatibant (free base). Each prefilled syringe delivers 3 mL of solution equivalent to a 30 mg icatibant dose. The solution is clear and colorless. The solution also contains sodium chloride (isotonicity reagent), glacial acetic acid (pH adjuster), sodium hydroxide (pH adjuster) and water for injection with a pH of approximately 5.5. The solution does not contain preservatives. Pharmacological class: Icatibant is a bradykinin B2 receptor antagonist."
},
{
"NDCCode": "51655-559-25",
"PackageDescription": "60 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-25) ",
"NDC11Code": "51655-0559-25",
"ProductNDC": "51655-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20231011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201991",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231212",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3."
},
{
"NDCCode": "51655-559-26",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-26) ",
"NDC11Code": "51655-0559-26",
"ProductNDC": "51655-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20231011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201991",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231012",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3."
},
{
"NDCCode": "51655-559-52",
"PackageDescription": "30 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-52) ",
"NDC11Code": "51655-0559-52",
"ProductNDC": "51655-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20231011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201991",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231025",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3."
},
{
"NDCCode": "51655-559-82",
"PackageDescription": "120 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-82) ",
"NDC11Code": "51655-0559-82",
"ProductNDC": "51655-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20231011",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201991",
"LabelerName": "Northwind Health Company, LLC",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231011",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3."
},
{
"NDCCode": "63323-881-16",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-881-16) > 15 mL in 1 VIAL, SINGLE-DOSE (63323-881-01) ",
"NDC11Code": "63323-0881-16",
"ProductNDC": "63323-881",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209997",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS",
"StrengthNumber": "276; 142",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220330",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "63323-884-06",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-884-06) > 5 mL in 1 VIAL, SINGLE-DOSE (63323-884-01) ",
"NDC11Code": "63323-0884-06",
"ProductNDC": "63323-884",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209997",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS",
"StrengthNumber": "276; 142",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220330",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "63323-886-56",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-886-56) > 50 mL in 1 VIAL, SINGLE-DOSE (63323-886-01) ",
"NDC11Code": "63323-0886-56",
"ProductNDC": "63323-886",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Phosphates",
"NonProprietaryName": "Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20220330",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209997",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS",
"StrengthNumber": "276; 142",
"StrengthUnit": "mg/mL; mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2022-04-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220330",
"SamplePackage": "N",
"IndicationAndUsage": "Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.",
"Description": "Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water."
},
{
"NDCCode": "10356-559-05",
"PackageDescription": "50 mL in 1 BOTTLE, PUMP (10356-559-05)",
"NDC11Code": "10356-0559-05",
"ProductNDC": "10356-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nivea For Men Q10 Energy",
"NonProprietaryName": "Avobenzone, Octinoxate, Oxybenzone",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20120103",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Beiersdorf Inc",
"SubstanceName": "AVOBENZONE; OCTINOXATE; OXYBENZONE",
"StrengthNumber": "2; 6; 2",
"StrengthUnit": "mL/100mL; mL/100mL; mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2016-03-11"
},
{
"NDCCode": "10544-559-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (10544-559-90)",
"NDC11Code": "10544-0559-90",
"ProductNDC": "10544-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxybutynin Chloride",
"NonProprietaryName": "Oxybutynin Chloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20131113",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA071655",
"LabelerName": "Blenheim Pharmacal, Inc.",
"SubstanceName": "OXYBUTYNIN CHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Oxybutynin chloride tablets USP are indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).",
"Description": "Oxybutynin chloride tablets USP are very pale blue, round, biconvex, scored, debossed tablets containing 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The structural formula appears below. Oxybutynin chloride, USP is a white crystalline solid. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride tablets USP also contain calcium stearate, microcrystalline cellulose, anhydrous lactose, sodium starch glycolate and FD&C Blue #1 Aluminum Lake. Oxybutynin chloride tablets USP are for oral administration. Meets USP Dissolution Test 2. Therapeutic Category: Antispasmodic, anticholinergic."
},
{
"NDCCode": "10597-559-05",
"PackageDescription": "30 TABLET, ORALLY DISINTEGRATING in 1 BOX (10597-559-05)",
"NDC11Code": "10597-0559-05",
"ProductNDC": "10597-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fasprin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20060920",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Nobel Laboratories, LLC",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For temporary relief of minor aches and pains."
},
{
"NDCCode": "10597-559-06",
"PackageDescription": "100 TABLET, ORALLY DISINTEGRATING in 1 BOX (10597-559-06)",
"NDC11Code": "10597-0559-06",
"ProductNDC": "10597-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Fasprin",
"NonProprietaryName": "Aspirin",
"DosageFormName": "TABLET, ORALLY DISINTEGRATING",
"RouteName": "ORAL",
"StartMarketingDate": "20060920",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part343",
"LabelerName": "Nobel Laboratories, LLC",
"SubstanceName": "ASPIRIN",
"StrengthNumber": "81",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "For temporary relief of minor aches and pains."
},
{
"NDCCode": "11344-559-05",
"PackageDescription": "207 mL in 1 TUBE (11344-559-05) ",
"NDC11Code": "11344-0559-05",
"ProductNDC": "11344-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Moisturizing Sunscreen Spf 30",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230503",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Nice-Pak Products, LLC",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE",
"StrengthNumber": "30; 100; 50",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241119",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protections measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "11344-559-34",
"PackageDescription": "236 mL in 1 BOTTLE, PLASTIC (11344-559-34) ",
"NDC11Code": "11344-0559-34",
"ProductNDC": "11344-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Moisturizing Sunscreen Spf 30",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate",
"DosageFormName": "LOTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230503",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Nice-Pak Products, LLC",
"SubstanceName": "AVOBENZONE; HOMOSALATE; OCTISALATE",
"StrengthNumber": "30; 100; 50",
"StrengthUnit": "mg/mL; mg/mL; mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230503",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent sunburn. if used as directed with other sun protections measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun ."
},
{
"NDCCode": "13537-559-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-559-02) > 4 g in 1 TUBE (13537-559-01)",
"NDC11Code": "13537-0559-02",
"ProductNDC": "13537-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lbel Couleur Luxe Amplifier Xp",
"ProprietaryNameSuffix": "Amplifying Spf 15 - Rose Fucsia",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20130527",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD.",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".047; .009",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "16252-559-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (16252-559-60)",
"NDC11Code": "16252-0559-60",
"ProductNDC": "16252-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20081205",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077860",
"LabelerName": "Cobalt Laboratories",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-02-17"
},
{
"NDCCode": "16714-559-01",
"PackageDescription": "90 TABLET in 1 BOTTLE (16714-559-01) ",
"NDC11Code": "16714-0559-01",
"ProductNDC": "16714-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220812",
"SamplePackage": "N"
},
{
"NDCCode": "16714-559-02",
"PackageDescription": "500 TABLET in 1 BOTTLE (16714-559-02) ",
"NDC11Code": "16714-0559-02",
"ProductNDC": "16714-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Pravastatin Sodium",
"NonProprietaryName": "Pravastatin Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220812",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077987",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "PRAVASTATIN SODIUM",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-09-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220812",
"SamplePackage": "N"
},
{
"NDCCode": "17333-559-01",
"PackageDescription": "50 kg in 1 DRUM (17333-559-01)",
"NDC11Code": "17333-0559-01",
"ProductNDC": "17333-559",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "L-dihydroxyphenylalanine",
"DosageFormName": "POWDER, DENTIFRICE",
"StartMarketingDate": "19820415",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Ajinomoto Co., Inc.",
"SubstanceName": "LEVODOPA",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "21130-559-58",
"PackageDescription": "1 TUBE in 1 CARTON (21130-559-58) / 14 g in 1 TUBE",
"NDC11Code": "21130-0559-58",
"ProductNDC": "21130-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Signature Care First Aid Antibiotic",
"NonProprietaryName": "Neomycin, Polymyxin B, Pramoxine Hcl",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20151110",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M004",
"LabelerName": "Safeway",
"SubstanceName": "NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE; POLYMYXIN B SULFATE",
"StrengthNumber": "3.5; 10; 10000",
"StrengthUnit": "mg/g; mg/g; [USP'U]/g",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Active",
"LastUpdate": "2024-09-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151110",
"SamplePackage": "N",
"IndicationAndUsage": "first aid to help prevent infection and for temporary relief of pain or discomfort in minor: 1 cuts , 2 scrapes , 3 burns."
},
{
"NDCCode": "21695-559-20",
"PackageDescription": "200 mL in 1 BOTTLE (21695-559-20)",
"NDC11Code": "21695-0559-20",
"ProductNDC": "21695-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Penicillin V Potassium",
"NonProprietaryName": "Penicillin V Potassium",
"DosageFormName": "POWDER, FOR SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "19680731",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA060456",
"LabelerName": "Rebel Distributors Corp",
"SubstanceName": "PENICILLIN V POTASSIUM",
"StrengthNumber": "250",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Penicillins [CS],Penicillin-class Antibacterial [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium tablets, penicillin V potassium for oral solution, and other antibacterial drugs, penicillin V potassium tablets and penicillin V potassium for oral solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets and penicillin V potassium for oral solution are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections—penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis)— Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis. For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract.1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal-tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association.1.",
"Description": "Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Each penicillin V potassium tablet, USP contains penicillin V potassium equivalent to 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. The inactive ingredients present are dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium citrate. Each penicillin V potassium tablet, USP, 250 mg contains 0.71 mEq (27.9 mg) of potassium and each penicillin V potassium tablet, USP, 500 mg contains 1.43 mEq (55.8 mg) of potassium. Penicillin V potassium for oral solution, USP is an off-white to pinkish colored powder, which when reconstituted as directed, yields a red colored solution with cherry flavor in which each 5 mL contains penicillin V potassium equivalent to 125 mg (200,000 units) or 250 mg (400,000 units) penicillin V. The inactive ingredients present are cherry flavor, FD&C Red #40, saccharin sodium, sodium benzoate, and sugar. Each 5 mL of reconstituted penicillin V potassium for oral solution, USP, 125 mg (200,000 units) per 5 mL contains 0.36 mEq (13.9 mg) of potassium. Each 5 mL of reconstituted penicillin V potassium for oral solution, USP, 250 mg (400,000 units) per 5 mL contains 0.71 mEq (27.9 mg) of potassium. Monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenoxyacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate."
},
{
"NDCCode": "30142-559-60",
"PackageDescription": "20 BLISTER PACK in 1 CARTON (30142-559-60) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "30142-0559-60",
"ProductNDC": "30142-559",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sinus",
"NonProprietaryName": "Pseudoephedrine Hcl",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200518",
"EndMarketingDate": "20230630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075153",
"LabelerName": "Kroger Company",
"SubstanceName": "PSEUDOEPHEDRINE HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-07-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20200518",
"EndMarketingDatePackage": "20230630",
"SamplePackage": "N"
},
{
"NDCCode": "33261-559-15",
"PackageDescription": "15 g in 1 TUBE (33261-559-15) ",
"NDC11Code": "33261-0559-15",
"ProductNDC": "33261-559",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088042",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20180814",
"SamplePackage": "N",
"IndicationAndUsage": "Triamcinolone acetonide cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Chemically triamcinolone acetonide is pregna-1, 4-diene-3, 20-dione, 9-flouro-11, 21-dihydroxy-16, 17-[(1-methylethylidene)bis(oxy)]-(11β16a). Its structural formula is. Each gram of Triamcinolone Acetonide Cream USP, 0.025 % contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.Each gram of Triamcinolone Acetonide Cream USP, 0.1 % contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.Each gram of Triamcinolone Acetonide Cream USP, 0.5 % contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63323-559-93</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63323-559-93) / 1 SYRINGE in 1 BLISTER PACK (63323-559-21) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0559-93</NDC11Code>
<ProductNDC>63323-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63323-559-65</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (63323-559-65) / 1 SYRINGE in 1 BLISTER PACK (63323-559-63) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0559-65</NDC11Code>
<ProductNDC>63323-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190423</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078990</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190423</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium injection is a low molecular weight heparin [LMWH] indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1) , 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2) , 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2) , 4 Prophylaxis of ischemic complications of unstable angina and non-Q-wave myocardial infarction [MI] (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction [STEMI] managed medically or with subsequent percutaneous coronary intervention [PCI] (1.4) .</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains an 1,6 anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is:. STRUCTURAL FORMULA. Enoxaparin sodium injection 100 mg/mL concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium injection, USP prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>63323-286-95</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-286-95) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-93) </PackageDescription>
<NDC11Code>63323-0286-95</NDC11Code>
<ProductNDC>63323-286</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20090804</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090804</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. C17H26N2OHClH2O M.W. 328.89. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>63323-322-93</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-322-93) > 20 mL in 1 VIAL, SINGLE-DOSE (63323-322-21) </PackageDescription>
<NDC11Code>63323-0322-93</NDC11Code>
<ProductNDC>63323-322</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Imipenem And Cilastatin</ProprietaryName>
<NonProprietaryName>Imipenem And Cilastatin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090577</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>IMIPENEM; CILASTATIN SODIUM</SubstanceName>
<StrengthNumber>500; 500</StrengthNumber>
<StrengthUnit>mg/20mL; mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Imipenem and Cilastatin for Injection, USP for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: : 1 Lower respiratory tract infections. ( 1.1) , 2 Urinary tract infections. ( 1.2) , 3 Intra-abdominal infections. ( 1.3) , 4 Gynecologic infections. ( 1.4) , 5 Bacterial septicemia. ( 1.5) , 6 Bone and joint infections. ( 1.6) , 7 Skin and skin structure infections. ( 1.7) , 8 Endocarditis. ( 1.8) .</IndicationAndUsage>
<Description>Imipenem and Cilastatin for Injection, USP (I.V.) (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. Imipenem and Cilastatin for Injection, USP (I.V.) is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C 12H 17N 3O 4SH 2O, and its structural formula is:. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C 16H 25N 2O 5SNa, and its structural formula is:. Imipenem and Cilastatin for Injection, USP (I.V.) is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed. [see How Supplied/ Storage and Handling ( 16.1).] Each Imipenem and Cilastatin for Injection, USP (I.V.) 250 mg/250 mg vial contains imipenem USP 250 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 250 mg cilastatin and each 500 mg/500 mg vial contains imipenem USP 500 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 500 mg cilastatin. In addition, the 250 mg/250 mg vial contains 10 mg of sodium bicarbonate and the 500 mg/500 mg vial contains 20 mg of sodium bicarbonate. The sodium content of the 250 mg/250 mg vial is 18.8 mg (0.8 mEq) and the sodium content for the 500 mg/500 mg vial is 37.5 mg (1.6 mEq). Solutions of Imipenem and Cilastatin for Injection, USP (I.V.) range from colorless to yellow. Variations of color within this range do not affect the potency of the product.</Description>
</NDC>
<NDC>
<NDCCode>63323-349-93</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-349-93) > 20 mL in 1 VIAL, SINGLE-DOSE (63323-349-21) </PackageDescription>
<NDC11Code>63323-0349-93</NDC11Code>
<ProductNDC>63323-349</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Imipenem And Cilastatin</ProprietaryName>
<NonProprietaryName>Imipenem And Cilastatin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20120103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090577</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>IMIPENEM; CILASTATIN SODIUM</SubstanceName>
<StrengthNumber>250; 250</StrengthNumber>
<StrengthUnit>mg/20mL; mg/20mL</StrengthUnit>
<Pharm_Classes>Carbapenems [CS], Dipeptidase Inhibitors [MoA], Penem Antibacterial [EPC], Renal Dehydropeptidase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120103</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Imipenem and Cilastatin for Injection, USP for intravenous use is a combination of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor, indicated for the treatment of the following serious infections caused by designated susceptible bacteria: : 1 Lower respiratory tract infections. ( 1.1) , 2 Urinary tract infections. ( 1.2) , 3 Intra-abdominal infections. ( 1.3) , 4 Gynecologic infections. ( 1.4) , 5 Bacterial septicemia. ( 1.5) , 6 Bone and joint infections. ( 1.6) , 7 Skin and skin structure infections. ( 1.7) , 8 Endocarditis. ( 1.8) .</IndicationAndUsage>
<Description>Imipenem and Cilastatin for Injection, USP (I.V.) (imipenem and cilastatin) for Injection is a sterile formulation of imipenem, a penem antibacterial, and cilastatin, a renal dehydropeptidase inhibitor with sodium bicarbonate added as a buffer. Imipenem and Cilastatin for Injection, USP (I.V.) is an antibacterial drug for intravenous administration. Imipenem (N-formimidoylthienamycin monohydrate) is a crystalline derivative of thienamycin, which is produced by Streptomyces cattleya. Its chemical name is (5R,6S)-3-[[2-(formimidoylamino)ethyl]thio]-6-[(R)-1-hydroxyethyl]-7-oxo-1-azabicyclo[3.2.0]hept-2-ene-2-carboxylic acid monohydrate. It is an off-white, nonhygroscopic crystalline compound with a molecular weight of 317.37. It is sparingly soluble in water and slightly soluble in methanol. Its empirical formula is C 12H 17N 3O 4SH 2O, and its structural formula is:. Cilastatin sodium is the sodium salt of a derivatized heptenoic acid. Its chemical name is sodium (Z)-7[[(R)-2-amino-2-carboxyethyl]thio]-2-[(S)-2,2-dimethylcyclopropanecarboxamido]-2-heptenoate. It is an off-white to yellowish-white, hygroscopic, amorphous compound with a molecular weight of 380.43. It is very soluble in water and in methanol. Its empirical formula is C 16H 25N 2O 5SNa, and its structural formula is:. Imipenem and Cilastatin for Injection, USP (I.V.) is buffered to provide solutions in the pH range of 6.5 to 8.5. There is no significant change in pH when solutions are prepared and used as directed. [see How Supplied/ Storage and Handling ( 16.1).] Each Imipenem and Cilastatin for Injection, USP (I.V.) 250 mg/250 mg vial contains imipenem USP 250 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 250 mg cilastatin and each 500 mg/500 mg vial contains imipenem USP 500 mg (anhydrous equivalent) and cilastatin sodium USP equivalent to 500 mg cilastatin. In addition, the 250 mg/250 mg vial contains 10 mg of sodium bicarbonate and the 500 mg/500 mg vial contains 20 mg of sodium bicarbonate. The sodium content of the 250 mg/250 mg vial is 18.8 mg (0.8 mEq) and the sodium content for the 500 mg/500 mg vial is 37.5 mg (1.6 mEq). Solutions of Imipenem and Cilastatin for Injection, USP (I.V.) range from colorless to yellow. Variations of color within this range do not affect the potency of the product.</Description>
</NDC>
<NDC>
<NDCCode>63323-533-93</NDCCode>
<PackageDescription>10 CELLO PACK in 1 CARTON (63323-533-93) / 1 SYRINGE in 1 CELLO PACK (63323-533-13) / .3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0533-93</NDC11Code>
<ProductNDC>63323-533</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20190618</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/.3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS], Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190618</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Enoxaparin sodium is a low molecular weight heparin (LMWH) indicated for: 1 Prophylaxis of deep vein thrombosis (DVT) in abdominal surgery, hip replacement surgery, knee replacement surgery, or medical patients with severely restricted mobility during acute illness (1.1), 2 Inpatient treatment of acute DVT with or without pulmonary embolism (1.2), 3 Outpatient treatment of acute DVT without pulmonary embolism (1.2), 4 Prophylaxis of ischemic complications of unstable angina and non–Q-wave myocardial infarction (MI) (1.3), 5 Treatment of acute ST-segment elevation myocardial infarction (STEMI) managed medically or with subsequent percutaneous coronary intervention (PCI) (1.4).</IndicationAndUsage>
<Description>Enoxaparin sodium injection is a sterile aqueous solution containing enoxaparin sodium, a low molecular weight heparin. The pH of the injection is 5.5 to 7.5. Enoxaparin sodium is obtained by alkaline depolymerization of heparin benzyl ester derived from porcine intestinal mucosa. Its structure is characterized by a 2-O-sulfo-4-enepyranosuronic acid group at the non-reducing end and a 2-N,6-O-disulfo-D-glucosamine at the reducing end of the chain. About 20% (ranging between 15% and 25%) of the enoxaparin structure contains a 1,6-anhydro derivative on the reducing end of the polysaccharide chain. The drug substance is the sodium salt. The average molecular weight is about 4500 daltons. The molecular weight distribution is. STRUCTURAL FORMULA. R1 = H or SO3Na and R2 = SO3Na or COCH3. Enoxaparin sodium injection 100 mg/mL Concentration contains 10 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1000 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. Enoxaparin sodium injection 150 mg/mL Concentration contains 15 mg enoxaparin sodium (approximate anti-Factor Xa activity of 1500 IU [with reference to the W.H.O. First International Low Molecular Weight Heparin Reference Standard]) per 0.1 mL Water for Injection. The enoxaparin sodium prefilled syringes and graduated prefilled syringes are preservative-free and intended for use only as a single-dose injection. The multiple-dose vial contains 15 mg benzyl alcohol per 1 mL as a preservative [see Dosage and Administration (2) and How Supplied/Storage and Handling (16)].</Description>
</NDC>
<NDC>
<NDCCode>63323-565-93</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 CARTON (63323-565-93) > 3 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>63323-0565-93</NDC11Code>
<ProductNDC>63323-565</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Enoxaparin Sodium</ProprietaryName>
<NonProprietaryName>Enoxaparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20150315</StartMarketingDate>
<EndMarketingDate>20200731</EndMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA020164</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ENOXAPARIN SODIUM</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/3mL</StrengthUnit>
<Pharm_Classes>Heparin, Low-Molecular-Weight [CS],Low Molecular Weight Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-08-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20150315</StartMarketingDatePackage>
<EndMarketingDatePackage>20200731</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63323-574-93</NDCCode>
<PackageDescription>3 CARTON in 1 BOX (63323-574-93) / 1 SYRINGE in 1 CARTON / 3 mL in 1 SYRINGE</PackageDescription>
<NDC11Code>63323-0574-93</NDC11Code>
<ProductNDC>63323-574</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Icatibant</ProprietaryName>
<NonProprietaryName>Icatibant</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20201115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208317</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ICATIBANT ACETATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Bradykinin B2 Receptor Antagonist [EPC], Bradykinin B2 Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Icatibant injection is indicated for the treatment of acute attacks of hereditary angioedema (HAE) in adults 18 years of age and older.</IndicationAndUsage>
<Description>Icatibant is a synthetic decapeptide with five non-proteinogenic amino acids. The chemical structure of icatibant acetate is presented in Figure 1. Figure 1 Chemical Structure. Chemical name: D-Arginyl-L-arginyl-L-prolyl-L[(4R)-4-hydroxyprolyl]-glycyl-L[3-(2-thienyl)alanyl]-L-seryl-D-(1,2,3,4-tetrahydroisoquinolin-3-ylcarbonyl)-L[(3aS,7aS)-octahydroindol-2-ylcarbonyl]-L-arginine, acetate salt. Icatibant injection is provided as a sterile, isotonic, and buffered solution of icatibant acetate in a single-dose, prefilled syringe for subcutaneous administration. Each mL of the solution contains 10 mg of icatibant (free base). Each prefilled syringe delivers 3 mL of solution equivalent to a 30 mg icatibant dose. The solution is clear and colorless. The solution also contains sodium chloride (isotonicity reagent), glacial acetic acid (pH adjuster), sodium hydroxide (pH adjuster) and water for injection with a pH of approximately 5.5. The solution does not contain preservatives. Pharmacological class: Icatibant is a bradykinin B2 receptor antagonist.</Description>
</NDC>
<NDC>
<NDCCode>51655-559-25</NDCCode>
<PackageDescription>60 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-25) </PackageDescription>
<NDC11Code>51655-0559-25</NDC11Code>
<ProductNDC>51655-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201991</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>51655-559-26</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-26) </PackageDescription>
<NDC11Code>51655-0559-26</NDC11Code>
<ProductNDC>51655-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201991</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>51655-559-52</NDCCode>
<PackageDescription>30 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-52) </PackageDescription>
<NDC11Code>51655-0559-52</NDC11Code>
<ProductNDC>51655-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201991</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231025</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>51655-559-82</NDCCode>
<PackageDescription>120 TABLET, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (51655-559-82) </PackageDescription>
<NDC11Code>51655-0559-82</NDC11Code>
<ProductNDC>51655-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20231011</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201991</ApplicationNumber>
<LabelerName>Northwind Health Company, LLC</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231011</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin hydrochloride extended-release tablets are indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin hydrochloride extended-release tablets, USP contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5 HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg of metformin hydrochloride, which is equivalent to 389.93 mg metformin base. Metformin hydrochloride extended-release tablets USP, 500 mg contain the inactive ingredients carboxymethylcellulose sodium, hypromellose and magnesium stearate. Metformin Hydrochloride Extended-Release Tablets, USP meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>63323-881-16</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-881-16) > 15 mL in 1 VIAL, SINGLE-DOSE (63323-881-01) </PackageDescription>
<NDC11Code>63323-0881-16</NDC11Code>
<ProductNDC>63323-881</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209997</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS</SubstanceName>
<StrengthNumber>276; 142</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>63323-884-06</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-884-06) > 5 mL in 1 VIAL, SINGLE-DOSE (63323-884-01) </PackageDescription>
<NDC11Code>63323-0884-06</NDC11Code>
<ProductNDC>63323-884</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209997</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS</SubstanceName>
<StrengthNumber>276; 142</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>63323-886-56</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-886-56) > 50 mL in 1 VIAL, SINGLE-DOSE (63323-886-01) </PackageDescription>
<NDC11Code>63323-0886-56</NDC11Code>
<ProductNDC>63323-886</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Phosphates</ProprietaryName>
<NonProprietaryName>Sodium Phosphate, Monobasic, Monohydrate And Sodium Phosphate, Dibasic, Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20220330</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209997</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; SODIUM PHOSPHATE, DIBASIC, ANHYDROUS</SubstanceName>
<StrengthNumber>276; 142</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-04-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sodium Phosphates Injection, USP, 3 mM P/mL is indicated as a source of phosphorus, for addition to large volume intravenous fluids, to prevent or correct hypophosphatemia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific parenteral fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions. The concomitant amount of sodium (Na+ 4 mEq/mL) must be calculated into total electrolyte dose of such prepared solutions.</IndicationAndUsage>
<Description>Sodium Phosphates Injection, USP, 3 mM P/mL (millimoles/mL), is a sterile, nonpyrogenic, concentrated solution containing a mixture of monobasic sodium phosphate and dibasic sodium phosphate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains 276 mg of monobasic sodium phosphate, monohydrate and 142 mg of dibasic sodium phosphate, anhydrous (equivalent to 268 mg of dibasic sodium phosphate, heptahydrate). One mM of phosphorus weighs 31 mg, and the product provides 93 mg (approximately 3 mM) of phosphorus/mL plus 92 mg (4 mEq) of sodium/mL. Note: 1 mM P = 1 mM PO4. It contains no bacteriostat, antimicrobial agent (preservative free) or added buffer. The pH is 5.5 (5.0 to 6.0). The osmolar concentration is 7 mOsmol/mL (calc). The solution is intended as an alternative to potassium phosphate to provide phosphorus for addition to large volume infusion fluids for intravenous use. It is provided as 5 mL, 15 mL and 50 mL partial fill single-dose vial; when lesser amounts are required, the unused portion should be discarded with the entire unit. Monobasic Sodium Phosphate, USP (monohydrate) is chemically designated NaH2PO4 H2O, white, odorless crystals or granules freely soluble in water. Dibasic Sodium Phosphate, USP (anhydrous) is chemically designated Na2HPO4, colorless or white granular salt freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>10356-559-05</NDCCode>
<PackageDescription>50 mL in 1 BOTTLE, PUMP (10356-559-05)</PackageDescription>
<NDC11Code>10356-0559-05</NDC11Code>
<ProductNDC>10356-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nivea For Men Q10 Energy</ProprietaryName>
<NonProprietaryName>Avobenzone, Octinoxate, Oxybenzone</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20120103</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Beiersdorf Inc</LabelerName>
<SubstanceName>AVOBENZONE; OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>2; 6; 2</StrengthNumber>
<StrengthUnit>mL/100mL; mL/100mL; mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-03-11</LastUpdate>
</NDC>
<NDC>
<NDCCode>10544-559-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (10544-559-90)</PackageDescription>
<NDC11Code>10544-0559-90</NDC11Code>
<ProductNDC>10544-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxybutynin Chloride</ProprietaryName>
<NonProprietaryName>Oxybutynin Chloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20131113</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA071655</ApplicationNumber>
<LabelerName>Blenheim Pharmacal, Inc.</LabelerName>
<SubstanceName>OXYBUTYNIN CHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Muscarinic Antagonist [EPC],Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Oxybutynin chloride tablets USP are indicated for the relief of symptoms of bladder instability associated with voiding in patients with uninhibited neurogenic or reflex neurogenic bladder (i.e., urgency, frequency, urinary leakage, urge incontinence, dysuria).</IndicationAndUsage>
<Description>Oxybutynin chloride tablets USP are very pale blue, round, biconvex, scored, debossed tablets containing 5 mg of oxybutynin chloride, USP. Chemically, oxybutynin chloride, USP is d,l (racemic) 4-diethylamino-2-butynyl phenylcyclohexylglycolate hydrochloride. The structural formula appears below. Oxybutynin chloride, USP is a white crystalline solid. It is readily soluble in water and acids, but relatively insoluble in alkalis. Oxybutynin chloride tablets USP also contain calcium stearate, microcrystalline cellulose, anhydrous lactose, sodium starch glycolate and FD&C Blue #1 Aluminum Lake. Oxybutynin chloride tablets USP are for oral administration. Meets USP Dissolution Test 2. Therapeutic Category: Antispasmodic, anticholinergic.</Description>
</NDC>
<NDC>
<NDCCode>10597-559-05</NDCCode>
<PackageDescription>30 TABLET, ORALLY DISINTEGRATING in 1 BOX (10597-559-05)</PackageDescription>
<NDC11Code>10597-0559-05</NDC11Code>
<ProductNDC>10597-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fasprin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060920</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Nobel Laboratories, LLC</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For temporary relief of minor aches and pains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>10597-559-06</NDCCode>
<PackageDescription>100 TABLET, ORALLY DISINTEGRATING in 1 BOX (10597-559-06)</PackageDescription>
<NDC11Code>10597-0559-06</NDC11Code>
<ProductNDC>10597-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Fasprin</ProprietaryName>
<NonProprietaryName>Aspirin</NonProprietaryName>
<DosageFormName>TABLET, ORALLY DISINTEGRATING</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060920</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part343</ApplicationNumber>
<LabelerName>Nobel Laboratories, LLC</LabelerName>
<SubstanceName>ASPIRIN</SubstanceName>
<StrengthNumber>81</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For temporary relief of minor aches and pains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11344-559-05</NDCCode>
<PackageDescription>207 mL in 1 TUBE (11344-559-05) </PackageDescription>
<NDC11Code>11344-0559-05</NDC11Code>
<ProductNDC>11344-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Moisturizing Sunscreen Spf 30</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230503</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Nice-Pak Products, LLC</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE</SubstanceName>
<StrengthNumber>30; 100; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241119</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protections measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>11344-559-34</NDCCode>
<PackageDescription>236 mL in 1 BOTTLE, PLASTIC (11344-559-34) </PackageDescription>
<NDC11Code>11344-0559-34</NDC11Code>
<ProductNDC>11344-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Moisturizing Sunscreen Spf 30</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate</NonProprietaryName>
<DosageFormName>LOTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230503</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Nice-Pak Products, LLC</LabelerName>
<SubstanceName>AVOBENZONE; HOMOSALATE; OCTISALATE</SubstanceName>
<StrengthNumber>30; 100; 50</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent sunburn. if used as directed with other sun protections measures (see Directions), decreases the risk of skin cancer and early skin aging caused by the sun .</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>13537-559-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-559-02) > 4 g in 1 TUBE (13537-559-01)</PackageDescription>
<NDC11Code>13537-0559-02</NDC11Code>
<ProductNDC>13537-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lbel Couleur Luxe Amplifier Xp</ProprietaryName>
<ProprietaryNameSuffix>Amplifying Spf 15 - Rose Fucsia</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20130527</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD.</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.047; .009</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16252-559-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (16252-559-60)</PackageDescription>
<NDC11Code>16252-0559-60</NDC11Code>
<ProductNDC>16252-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20081205</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077860</ApplicationNumber>
<LabelerName>Cobalt Laboratories</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-02-17</LastUpdate>
</NDC>
<NDC>
<NDCCode>16714-559-01</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (16714-559-01) </PackageDescription>
<NDC11Code>16714-0559-01</NDC11Code>
<ProductNDC>16714-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>16714-559-02</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (16714-559-02) </PackageDescription>
<NDC11Code>16714-0559-02</NDC11Code>
<ProductNDC>16714-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Pravastatin Sodium</ProprietaryName>
<NonProprietaryName>Pravastatin Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220812</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077987</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>PRAVASTATIN SODIUM</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>HMG-CoA Reductase Inhibitor [EPC], Hydroxymethylglutaryl-CoA Reductase Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220812</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>17333-559-01</NDCCode>
<PackageDescription>50 kg in 1 DRUM (17333-559-01)</PackageDescription>
<NDC11Code>17333-0559-01</NDC11Code>
<ProductNDC>17333-559</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>L-dihydroxyphenylalanine</NonProprietaryName>
<DosageFormName>POWDER, DENTIFRICE</DosageFormName>
<StartMarketingDate>19820415</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Ajinomoto Co., Inc.</LabelerName>
<SubstanceName>LEVODOPA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>21130-559-58</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (21130-559-58) / 14 g in 1 TUBE</PackageDescription>
<NDC11Code>21130-0559-58</NDC11Code>
<ProductNDC>21130-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Signature Care First Aid Antibiotic</ProprietaryName>
<NonProprietaryName>Neomycin, Polymyxin B, Pramoxine Hcl</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20151110</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M004</ApplicationNumber>
<LabelerName>Safeway</LabelerName>
<SubstanceName>NEOMYCIN SULFATE; PRAMOXINE HYDROCHLORIDE; POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>3.5; 10; 10000</StrengthNumber>
<StrengthUnit>mg/g; mg/g; [USP'U]/g</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS], Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151110</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>first aid to help prevent infection and for temporary relief of pain or discomfort in minor: 1 cuts , 2 scrapes , 3 burns.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>21695-559-20</NDCCode>
<PackageDescription>200 mL in 1 BOTTLE (21695-559-20)</PackageDescription>
<NDC11Code>21695-0559-20</NDC11Code>
<ProductNDC>21695-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Penicillin V Potassium</ProprietaryName>
<NonProprietaryName>Penicillin V Potassium</NonProprietaryName>
<DosageFormName>POWDER, FOR SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19680731</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA060456</ApplicationNumber>
<LabelerName>Rebel Distributors Corp</LabelerName>
<SubstanceName>PENICILLIN V POTASSIUM</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Penicillins [CS],Penicillin-class Antibacterial [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of penicillin V potassium tablets, penicillin V potassium for oral solution, and other antibacterial drugs, penicillin V potassium tablets and penicillin V potassium for oral solution should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Penicillin V potassium tablets and penicillin V potassium for oral solution are indicated in the treatment of mild to moderately severe infections due to penicillin G-sensitive microorganisms. Therapy should be guided by bacteriological studies (including sensitivity tests) and by clinical response. NOTE: Severe pneumonia, empyema, bacteremia, pericarditis, meningitis, and arthritis should not be treated with penicillin V during the acute stage. Indicated surgical procedures should be performed. The following infections will usually respond to adequate dosage of penicillin V. Streptococcal infections (without bacteremia). Mild-to-moderate infections of the upper respiratory tract, scarlet fever, and mild erysipelas. NOTE: Streptococci in groups A, C, G, H, L, and M are very sensitive to penicillin. Other groups, including group D (enterococcus), are resistant. Pneumococcal infections. Mild to moderately severe infections of the respiratory tract. Staphylococcal infections—penicillin G-sensitive. Mild infections of the skin and soft tissues. NOTE: Reports indicate an increasing number of strains of staphylococci resistant to penicillin G, emphasizing the need for culture and sensitivity studies in treating suspected staphylococcal infections. Fusospirochetosis (Vincent's gingivitis and pharyngitis)— Mild to moderately severe infections of the oropharynx usually respond to therapy with oral penicillin. NOTE: Necessary dental care should be accomplished in infections involving the gum tissue. Medical conditions in which oral penicillin therapy is indicated as prophylaxis. For the prevention of recurrence following rheumatic fever and/or chorea: Prophylaxis with oral penicillin on a continuing basis has proven effective in preventing recurrence of these conditions. Although no controlled clinical efficacy studies have been conducted, penicillin V has been suggested by the American Heart Association and the American Dental Association for use as an oral regimen for prophylaxis against bacterial endocarditis in patients who have congenital heart disease or rheumatic or other acquired valvular heart disease when they undergo dental procedures and surgical procedures of the upper respiratory tract.1 Oral penicillin should not be used in those patients at particularly high risk for endocarditis (e.g., those with prosthetic heart valves or surgically constructed systemic pulmonary shunts). Penicillin V should not be used as adjunctive prophylaxis for genitourinary instrumentation or surgery, lower-intestinal-tract surgery, sigmoidoscopy, and childbirth. Since it may happen that alpha hemolytic streptococci relatively resistant to penicillin may be found when patients are receiving continuous oral penicillin for secondary prevention of rheumatic fever, prophylactic agents other than penicillin may be chosen for these patients and prescribed in addition to their continuous rheumatic fever prophylactic regimen. NOTE: When selecting antibiotics for the prevention of bacterial endocarditis, the physician or dentist should read the full joint statement of the American Heart Association and the American Dental Association.1.</IndicationAndUsage>
<Description>Penicillin V is the phenoxymethyl analog of penicillin G. Penicillin V potassium is the potassium salt of penicillin V. Each penicillin V potassium tablet, USP contains penicillin V potassium equivalent to 250 mg (400,000 units) or 500 mg (800,000 units) penicillin V. The inactive ingredients present are dibasic calcium phosphate, magnesium stearate, microcrystalline cellulose, and sodium citrate. Each penicillin V potassium tablet, USP, 250 mg contains 0.71 mEq (27.9 mg) of potassium and each penicillin V potassium tablet, USP, 500 mg contains 1.43 mEq (55.8 mg) of potassium. Penicillin V potassium for oral solution, USP is an off-white to pinkish colored powder, which when reconstituted as directed, yields a red colored solution with cherry flavor in which each 5 mL contains penicillin V potassium equivalent to 125 mg (200,000 units) or 250 mg (400,000 units) penicillin V. The inactive ingredients present are cherry flavor, FD&C Red #40, saccharin sodium, sodium benzoate, and sugar. Each 5 mL of reconstituted penicillin V potassium for oral solution, USP, 125 mg (200,000 units) per 5 mL contains 0.36 mEq (13.9 mg) of potassium. Each 5 mL of reconstituted penicillin V potassium for oral solution, USP, 250 mg (400,000 units) per 5 mL contains 0.71 mEq (27.9 mg) of potassium. Monopotassium (2S,5R,6R)-3,3-dimethyl-7-oxo-6-(2-phenoxyacetamido)-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylate.</Description>
</NDC>
<NDC>
<NDCCode>30142-559-60</NDCCode>
<PackageDescription>20 BLISTER PACK in 1 CARTON (30142-559-60) / 1 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>30142-0559-60</NDC11Code>
<ProductNDC>30142-559</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sinus</ProprietaryName>
<NonProprietaryName>Pseudoephedrine Hcl</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200518</StartMarketingDate>
<EndMarketingDate>20230630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075153</ApplicationNumber>
<LabelerName>Kroger Company</LabelerName>
<SubstanceName>PSEUDOEPHEDRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Agonists [MoA], alpha-Adrenergic Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-07-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20200518</StartMarketingDatePackage>
<EndMarketingDatePackage>20230630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>33261-559-15</NDCCode>
<PackageDescription>15 g in 1 TUBE (33261-559-15) </PackageDescription>
<NDC11Code>33261-0559-15</NDC11Code>
<ProductNDC>33261-559</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088042</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid [EPC],Corticosteroid Hormone Receptor Agonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Triamcinolone acetonide cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and antipruritic agents. Triamcinolone acetonide is a member of this class. Chemically triamcinolone acetonide is pregna-1, 4-diene-3, 20-dione, 9-flouro-11, 21-dihydroxy-16, 17-[(1-methylethylidene)bis(oxy)]-(11β16a). Its structural formula is. Each gram of Triamcinolone Acetonide Cream USP, 0.025 % contains 0.25 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.Each gram of Triamcinolone Acetonide Cream USP, 0.1 % contains 1 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.Each gram of Triamcinolone Acetonide Cream USP, 0.5 % contains 5 mg triamcinolone acetonide USP in a cream base consisting of purified water, emulsifying wax, mineral oil, propylene glycol, sorbitol solution, cetyl palmitate, sorbic acid, and potassium sorbate.</Description>
</NDC>
</NDCList>