{
"NDC": [
{
"NDCCode": "63323-647-11",
"PackageDescription": "1 VIAL, SINGLE-USE in 1 CARTON (63323-647-11) > 5 mL in 1 VIAL, SINGLE-USE",
"NDC11Code": "63323-0647-11",
"ProductNDC": "63323-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium Anhydrous",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202231",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "ug/5mL",
"Pharm_Classes": "l-Thyroxine [EPC],Thyroxine [Chemical/Ingredient]",
"Status": "Deprecated",
"LastUpdate": "2017-11-22"
},
{
"NDCCode": "63323-647-10",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (63323-647-10) / 5 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "63323-0647-10",
"ProductNDC": "63323-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Levothyroxine Sodium",
"NonProprietaryName": "Levothyroxine Sodium Anhydrous",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20110624",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA202231",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "LEVOTHYROXINE SODIUM ANHYDROUS",
"StrengthNumber": "200",
"StrengthUnit": "ug/5mL",
"Pharm_Classes": "Thyroxine [CS], l-Thyroxine [EPC]",
"Status": "Active",
"LastUpdate": "2025-04-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110624",
"SamplePackage": "N",
"IndicationAndUsage": "Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.",
"Description": "Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula:. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder consisting of the active ingredient, levothyroxine sodium, and the excipients dibasic sodium phosphate heptahydrate, USP; mannitol, USP; and sodium hydroxide, NF in single dose amber glass vials. Levothyroxine Sodium for Injection is available at three dosage strengths: 100 mcg per vial, 200 mcg per vial and 500 mcg per vial."
},
{
"NDCCode": "43598-647-11",
"PackageDescription": "1 VIAL in 1 CARTON (43598-647-11) / 20 mL in 1 VIAL",
"NDC11Code": "43598-0647-11",
"ProductNDC": "43598-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Treprostinil",
"NonProprietaryName": "Treprostinil",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20230213",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210214",
"LabelerName": "Dr.Reddy's Laboratories Inc.,",
"SubstanceName": "TREPROSTINIL",
"StrengthNumber": "100",
"StrengthUnit": "mg/20mL",
"Pharm_Classes": "Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2024-08-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230213",
"SamplePackage": "N",
"Description": "Treprostinil Injection is a sterile solution of treprostinil formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20 mL multidose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1H-benz[f]inden-5-yl]oxy]acetic acid monohydrate. Treprostinil has a molecular weight of 408.53 and a molecular formula of C23H34O5.H2O. The structural formula of treprostinil is. Sterile Diluent for Tresprostinil Injection is a high-pH (pH-10.4) glycine diluent supplied in a 50 mL vial containing 50 mL of Sterile Diluent for Tresprostinil Injection. Each vial contains 94 mg glycine, 73.3 mg sodium chloride, sodium hydroxide ( to adjust pH), and water for injection."
},
{
"NDCCode": "50268-647-14",
"PackageDescription": "40 CUP, UNIT-DOSE in 1 TRAY (50268-647-14) / 5 mL in 1 CUP, UNIT-DOSE (50268-647-11) ",
"NDC11Code": "50268-0647-14",
"ProductNDC": "50268-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20230920",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091483",
"LabelerName": "AvPAK",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2026-01-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230920",
"SamplePackage": "N"
},
{
"NDCCode": "60687-647-01",
"PackageDescription": "100 BLISTER PACK in 1 CARTON (60687-647-01) / 1 TABLET in 1 BLISTER PACK (60687-647-11) ",
"NDC11Code": "60687-0647-01",
"ProductNDC": "60687-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ondansetron",
"NonProprietaryName": "Ondansetron",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220820",
"EndMarketingDate": "20240831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077851",
"LabelerName": "American Health Packaging",
"SubstanceName": "ONDANSETRON HYDROCHLORIDE",
"StrengthNumber": "8",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-09-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20220820",
"EndMarketingDatePackage": "20240831",
"SamplePackage": "N",
"IndicationAndUsage": "Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2. , 2 initial and repeat courses of moderately emetogenic cancer chemotherapy., 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.",
"Description": "The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The empirical formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3."
},
{
"NDCCode": "68084-647-01",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (68084-647-01) > 10 TABLET in 1 BLISTER PACK (68084-647-11) ",
"NDC11Code": "68084-0647-01",
"ProductNDC": "68084-647",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20130826",
"EndMarketingDate": "20190630",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074112",
"LabelerName": "American Health Packaging",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-07-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20130826",
"EndMarketingDatePackage": "20190630",
"SamplePackage": "N"
},
{
"NDCCode": "68428-647-11",
"PackageDescription": "300 PELLET in 1 BOTTLE, GLASS (68428-647-11) ",
"NDC11Code": "68428-0647-11",
"ProductNDC": "68428-647",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Staphysagria",
"NonProprietaryName": "Delphinium Staphisagria Seed",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20091016",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "DELPHINIUM STAPHISAGRIA SEED",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20091016",
"SamplePackage": "N",
"IndicationAndUsage": "Indications. STAPHYSAG Anger."
},
{
"NDCCode": "69423-647-11",
"PackageDescription": "1150 mL in 1 BOTTLE, PUMP (69423-647-11) ",
"NDC11Code": "69423-0647-11",
"ProductNDC": "69423-647",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Head And Shoulders Classic Clean With Vitamin E",
"NonProprietaryName": "Pyrithione Zinc",
"DosageFormName": "SHAMPOO",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220601",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M032",
"LabelerName": "The Procter & Gamble Manufacturing Company",
"SubstanceName": "PYRITHIONE ZINC",
"StrengthNumber": "1",
"StrengthUnit": "g/100mL",
"Status": "Active",
"LastUpdate": "2025-12-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220601",
"SamplePackage": "N",
"IndicationAndUsage": "helps prevent recurrence of flaking and itching associated with dandruff."
},
{
"NDCCode": "71052-647-11",
"PackageDescription": "100 g in 1 CONTAINER (71052-647-11) ",
"NDC11Code": "71052-0647-11",
"ProductNDC": "71052-647",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Escitalopram Oxalate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20210614",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "DARMERICA, LLC",
"SubstanceName": "ESCITALOPRAM OXALATE",
"StrengthNumber": "10",
"StrengthUnit": "g/10g",
"Status": "Deprecated",
"LastUpdate": "2014-02-04",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "17-JUN-21"
},
{
"NDCCode": "63323-012-11",
"PackageDescription": "25 VIAL in 1 TRAY (63323-012-11) / 1 mL in 1 VIAL (63323-012-03) ",
"NDC11Code": "63323-0012-11",
"ProductNDC": "63323-012",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxytocin",
"NonProprietaryName": "Oxytocin",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20000810",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018248",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "OXYTOCIN",
"StrengthNumber": "10",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Increased Uterine Smooth Muscle Contraction or Tone [PE], Oxytocic [EPC], Oxytocin [CS]",
"Status": "Active",
"LastUpdate": "2026-02-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000810",
"SamplePackage": "N",
"Description": "Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is."
},
{
"NDCCode": "63323-030-11",
"PackageDescription": "1 KIT in 1 CARTON (63323-030-11) * 10 mL in 1 VIAL, MULTI-DOSE * 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "63323-0030-11",
"ProductNDC": "63323-030",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chorionic Gonadotropin",
"NonProprietaryName": "Chorionic Gonadotropin",
"DosageFormName": "KIT",
"StartMarketingDate": "20110421",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA017067",
"LabelerName": "Fresenius Kabi USA, LLC",
"Status": "Active",
"LastUpdate": "2025-04-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110421",
"SamplePackage": "N",
"IndicationAndUsage": "HCG HAS NOT BEEN DEMONSTRATED TO BE EFFECTIVE ADJUNCTIVE THERAPY IN THE TREATMENT OF OBESITY. THERE IS NO SUBSTANTIAL EVIDENCE THAT IT INCREASES WEIGHT LOSS BEYOND THAT RESULTING FROM CALORIC RESTRICTION, THAT IT CAUSES A MORE ATTRACTIVE OR ‘‘NORMAL’’ DISTRIBUTION OF FAT, OR THAT IT DECREASES THE HUNGER AND DISCOMFORT ASSOCIATED WITH CALORIE-RESTRICTED DIETS. : 1 1.Prepubertal cryptorchidism not due to anatomical obstruction. In general, HCG is thought to induce testicular descent in situations when descent would have occurred at puberty. HCG thus may help predict whether or not orchiopexy will be needed in the future. Although, in some cases, descent following HCG administration is permanent, in most cases, the response is temporary. Therapy is usually instituted between the ages four and nine., 2 2.Selected cases of hypogonadotropic hypogonadism (hypogonadism secondary to a pituitary deficiency) in males., 3 3.Induction of ovulation and pregnancy in the anovulatory, infertile woman in whom the cause of anovulation is secondary and not due to primary ovarian failure, and who has been appropriately pretreated with human menotropins.",
"Description": "Human chorionic gonadotropin (HCG), a polypeptide hormone produced by the human placenta, is composed of an alpha and a beta sub-unit. The alpha sub-unit is essentially identical to the alpha sub-units of the human pituitary gonadotropins, luteinizing hormone (LH) and follicle-stimulating hormone (FSH), as well as to the alpha sub-unit of human thyroid-stimulating hormone (TSH). The beta sub-units of these hormones differ in amino acid sequence. Chorionic gonadotropin is obtained from the human pregnancy urine. It is standardized by a biological assay procedure. Chorionic Gonadotropin for injection is a sterile lyophilized powder available in multiple dose vials containing 10,000 USP units to be reconstituted with accompanying Bacteriostatic Water for Injection and administered intramuscularly after reconstitution. When reconstituted with 10 mL of the accompanying diluent each vial contains:. Chorionic gonadotropin 10,000 USP units. benzyl alcohol 0.9%. dibasic sodium phosphate 13 mg. mannitol 100 mg. monobasic sodium phosphate 3 mg. water for injection q.s. Buffered with dibasic sodium phosphate and monobasic sodium phosphate. Hydrochloric acid and/or sodium hydroxide may have been used for pH adjustment (6.0-8.0). Nitrogen gas is used in the freeze drying process."
},
{
"NDCCode": "63323-064-11",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-11) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-064-04) ",
"NDC11Code": "63323-0064-11",
"ProductNDC": "63323-064",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Magnesium Sulfate",
"NonProprietaryName": "Magnesium Sulfate Heptahydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20000808",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA019316",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MAGNESIUM SULFATE HEPTAHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20000808",
"SamplePackage": "N",
"IndicationAndUsage": "Magnesium Sulfate Injection, USP is suitable for replacement therapy in magnesium deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia. In such cases, the serum magnesium level is usually below the lower limit of normal (1.5 to 2.5 mEq/L) and the serum calcium level is normal (4.3 to 5.3 mEq/L) or elevated. In total parenteral nutrition (TPN), magnesium sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy. Magnesium sulfate injection is also indicated for the prevention and control of seizures in a pre-eclampsia and eclampsia, respectively.",
"Description": "Magnesium Sulfate Injection, USP 50% is a sterile, nonpyrogenic, concentrated solution of magnesium sulfate heptahydrate in Water for Injection. It is administered by the intravenous (IV) or intramuscular (IM) routes as an electrolyte replenisher or anticonvulsant. Must be diluted before IV use. Each mL contains: Magnesium sulfate heptahydrate 500 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment. The pH of a 5% solution is between 5.5 and 7.0. (Osmolarity: 4060 mOsmol/L (calc.); 2.03 mM/mL magnesium sulfate anhydrous; 4.06 mEq/mL magnesium sulfate anhydrous). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single dose injection. When smaller doses are required the unused portion should be discarded with the entire unit. Magnesium sulfate heptahydrate is chemically designated MgSO 47H 2O, with a molecular weight of 246.47 and occurs as colorless crystals or white powder freely soluble in water."
},
{
"NDCCode": "63323-130-11",
"PackageDescription": "10 VIAL in 1 TRAY (63323-130-11) > 10 mL in 1 VIAL (63323-130-02) ",
"NDC11Code": "63323-0130-11",
"ProductNDC": "63323-130",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Doxy 100",
"NonProprietaryName": "Doxycycline",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20001017",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA062475",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DOXYCYCLINE HYCLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2020-06-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20001017",
"SamplePackage": "N",
"IndicationAndUsage": "To reduce the development of drug-resistant bacteria and maintain the effectiveness of Doxycycline for Injection, USP and other antibacterial drugs, Doxycycline for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline for Injection, USP is indicated in infections caused by the following microorganisms: : 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers). , 2 Mycoplasma pneumoniae (PPLO, Eaton Agent). , 3 Agents of psittacosis and ornithosis. , 4 Agents of lymphogranuloma venereum and granuloma inguinale. , 5 The spirochetal agent of relapsing fever (Borrelia recurrentis). .",
"Description": "Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate is a yellowish crystalline powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11, 12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-de monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula:. Doxycycline hyclate is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg/mL) is between 1.8 and 3.3."
},
{
"NDCCode": "63323-162-51",
"PackageDescription": "25 VIAL in 1 TRAY (63323-162-51) / 1 mL in 1 VIAL (63323-162-11) ",
"NDC11Code": "63323-0162-51",
"ProductNDC": "63323-162",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20001018",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075784",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "30",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241001",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).",
"Description": "Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti- inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 0.1% citric acid, 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color."
},
{
"NDCCode": "63323-165-51",
"PackageDescription": "25 VIAL in 1 TRAY (63323-165-51) / 1 mL in 1 VIAL (63323-165-11) ",
"NDC11Code": "63323-0165-51",
"ProductNDC": "63323-165",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dexamethasone Sodium Phosphate",
"NonProprietaryName": "Dexamethasone Sodium Phosphate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20000907",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA084916",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXAMETHASONE SODIUM PHOSPHATE",
"StrengthNumber": "4",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250217",
"SamplePackage": "N",
"Description": "Dexamethasone sodium phosphate is a water-soluble inorganic ester of dexamethasone. It occurs as a white or slightly yellow crystalline powder, is odorless or has a slight odor of alcohol, is exceedingly hygroscopic and is freely soluble in water. Dexamethasone sodium phosphate is an adrenocortical steroid anti-inflammatory drug. Chemically, dexamethasone sodium phosphate is 9-Fluoro-11ß,17,21-trihydroxy-16α-methylpregna-1, 4-diene-3,20-dione 21-(dihydrogen phosphate) disodium salt and has the following structural formula. Dexamethasone Sodium Phosphate Injection, USP is a sterile solution of dexamethasone sodium phosphate in water for injection for intravenous (IV), intramuscular (IM), intra-articular, soft-tissue or intralesional use. Each mL contains dexamethasone sodium phosphate equivalent to dexamethasone phosphate 4 mg or dexamethasone 3.33 mg; benzyl alcohol 10 mg added as preservative; sodium citrate dihydrate 11 mg; sodium sulfite 1 mg as an antioxidant; Water for Injection q.s. Citric acid and/or sodium hydroxide may have been added for pH adjustment (7.0 to 8.5). Air in the container is displaced by nitrogen."
},
{
"NDCCode": "63323-184-11",
"PackageDescription": "10 VIAL in 1 TRAY (63323-184-11) > 10 mL in 1 VIAL",
"NDC11Code": "63323-0184-11",
"ProductNDC": "63323-184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Folic Acid",
"NonProprietaryName": "Folic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20000905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA089202",
"LabelerName": "APP Pharmaceuticals, LLC",
"SubstanceName": "FOLIC ACID",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2017-02-13"
},
{
"NDCCode": "63323-262-36",
"PackageDescription": "25 VIAL in 1 TRAY (63323-262-36) > 1 mL in 1 VIAL (63323-262-11) ",
"NDC11Code": "63323-0262-36",
"ProductNDC": "63323-262",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "20200302",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "5000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Active",
"LastUpdate": "2021-10-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200302",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-286-35",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-35) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-11) ",
"NDC11Code": "63323-0286-35",
"ProductNDC": "63323-286",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL; INFILTRATION; PERINEURAL",
"StartMarketingDate": "19960924",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110531",
"SamplePackage": "N",
"IndicationAndUsage": "NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "63323-288-11",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-288-11) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-288-03) ",
"NDC11Code": "63323-0288-11",
"ProductNDC": "63323-288",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Naropin",
"NonProprietaryName": "Ropivacaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "EPIDURAL",
"StartMarketingDate": "19960924",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020533",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "ROPIVACAINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20110531",
"SamplePackage": "N",
"IndicationAndUsage": "NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.",
"Description": "NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C."
},
{
"NDCCode": "63323-367-11",
"PackageDescription": "10 VIAL in 1 CARTON (63323-367-11) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63323-367-01) ",
"NDC11Code": "63323-0367-11",
"ProductNDC": "63323-367",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Polymyxin B",
"NonProprietaryName": "Polymyxin B Sulfate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC",
"StartMarketingDate": "20150909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202766",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "POLYMYXIN B SULFATE",
"StrengthNumber": "500000",
"StrengthUnit": "[USP'U]/1",
"Pharm_Classes": "Polymyxin-class Antibacterial [EPC], Polymyxins [CS]",
"Status": "Deprecated",
"LastUpdate": "2023-04-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20150909",
"SamplePackage": "N"
},
{
"NDCCode": "63323-540-11",
"PackageDescription": "25 VIAL in 1 TRAY (63323-540-11) / 10 mL in 1 VIAL",
"NDC11Code": "63323-0540-11",
"ProductNDC": "63323-540",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Heparin Sodium",
"NonProprietaryName": "Heparin Sodium",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS; SUBCUTANEOUS",
"StartMarketingDate": "19720222",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA017029",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "HEPARIN SODIUM",
"StrengthNumber": "1000",
"StrengthUnit": "[USP'U]/mL",
"Pharm_Classes": "Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]",
"Status": "Deprecated",
"LastUpdate": "2025-12-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "19990927",
"SamplePackage": "N",
"IndicationAndUsage": "Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.",
"Description": "Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preservative free, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each 0.5 mL of the 5,000 units per 0.5 mL preparation contains: 5,000 USP Heparin units (porcine); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with benzyl alcohol, is available as follows:. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 6 mg sodium chloride; 15 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 5 mg sodium chloride; 10.42 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 20,000 units per mL preparation contains: 20,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5)."
},
{
"NDCCode": "63323-578-11",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-11) / 1 mL in 1 VIAL, SINGLE-DOSE (63323-578-41) ",
"NDC11Code": "63323-0578-11",
"ProductNDC": "63323-578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glycopyrrolate",
"NonProprietaryName": "Glycopyrrolate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20171027",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209328",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GLYCOPYRROLATE",
"StrengthNumber": ".2",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]",
"Status": "Active",
"LastUpdate": "2024-10-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171027",
"SamplePackage": "N",
"IndicationAndUsage": "Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.",
"Description": "Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows: C19H28BrNO3 M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C)."
},
{
"NDCCode": "63323-596-13",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 TRAY (63323-596-13) > 1 mL in 1 VIAL, SINGLE-DOSE (63323-596-11) ",
"NDC11Code": "63323-0596-13",
"ProductNDC": "63323-596",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Glucagon",
"NonProprietaryName": "Glucagon",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20150508",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA201849",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "GLUCAGON HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antihypoglycemic Agent [EPC], Decreased GI Motility [PE], Decreased GI Smooth Muscle Tone [PE], Decreased Glycolysis [PE], Gastrointestinal Motility Inhibitor [EPC], Increased Gluconeogenesis [PE], Increased Glycogenolysis [PE]",
"Status": "Active",
"LastUpdate": "2021-11-18",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150508",
"SamplePackage": "N",
"IndicationAndUsage": "Glucagon for Injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: : 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes (1.1) , 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients (1.2) .",
"Description": "Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. It is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The structure of glucagon is:. Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial for subcutaneous, intramuscular or intravenous use. The reconstituted solution contains glucagon as hydrochloride 1 mg per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water."
},
{
"NDCCode": "63323-733-11",
"PackageDescription": "1 VIAL, MULTI-DOSE in 1 BOX (63323-733-11) / 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "63323-0733-11",
"ProductNDC": "63323-733",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Mesna",
"NonProprietaryName": "Mesna",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010905",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075811",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "MESNA",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Cytoprotective Agent [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-22",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010905",
"SamplePackage": "N",
"IndicationAndUsage": "Mesna Injection is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use:Mesna Injection is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.",
"Description": "Mesna Injection is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C2H5NaO3S2 and a molecular weight of 164.18. Its structural formula is as follows:HS–CH2–CH2SO3–Na+ Mesna Injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multiple dose vials for intravenous administration. Mesna Injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. Mesna Injection multiple dose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 6.5 to 8.5."
},
{
"NDCCode": "63323-739-12",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 TRAY (63323-739-12) > 2 mL in 1 VIAL, SINGLE-DOSE (63323-739-11) ",
"NDC11Code": "63323-0739-12",
"ProductNDC": "63323-739",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Famotidine",
"NonProprietaryName": "Famotidine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20010315",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075813",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "FAMOTIDINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]",
"Status": "Active",
"LastUpdate": "2022-11-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20010315",
"SamplePackage": "N",
"IndicationAndUsage": "Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: : 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than 8 weeks. , 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year. , 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks. , 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). , 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). .",
"Description": "The active ingredient in Famotidine Injection, USP is a histamine H2–receptor antagonist. Famotidine is [1-Amino-3-[[[2- [(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is:. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Famotidine Injection, USP is supplied as a sterile concentrated solution for intravenous injection. Each mL of the solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg, Water for Injection q.s. 1 mL."
},
{
"NDCCode": "63323-806-01",
"PackageDescription": "25 VIAL, SINGLE-DOSE in 1 CARTON (63323-806-01) / 1 mL in 1 VIAL, SINGLE-DOSE (63323-806-11) ",
"NDC11Code": "63323-0806-01",
"ProductNDC": "63323-806",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20190503",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210762",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": ".05",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-02-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190503",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: : 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises. , 2 use as a narcotic analgesic supplement in general or regional anesthesia. , 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia. , 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures. .",
"Description": "Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl) propionanilide citrate (1:1) with the following structural formula:. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 to 7.5. Contains no preservative."
},
{
"NDCCode": "63323-808-11",
"PackageDescription": "10 SYRINGE in 1 CARTON (63323-808-11) / 1 mL in 1 SYRINGE (63323-808-01) ",
"NDC11Code": "63323-0808-11",
"ProductNDC": "63323-808",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Fentanyl Citrate",
"NonProprietaryName": "Fentanyl Citrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20200930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA212086",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "FENTANYL CITRATE",
"StrengthNumber": "50",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2025-11-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200930",
"SamplePackage": "N",
"IndicationAndUsage": "Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.",
"Description": "Fentanyl Citrate Injection, USP, is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 to 7.5. Contains no preservative."
},
{
"NDCCode": "0407-1412-38",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1412-38) / 50 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1412-38",
"ProductNDC": "0407-1412",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL",
"StartMarketingDate": "20050811",
"EndMarketingDate": "20241110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA018956",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "240",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20050811",
"EndMarketingDatePackage": "20241110",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).",
"Description": "OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium."
},
{
"NDCCode": "0407-1414-48",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1414-48) / 500 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1414-48",
"ProductNDC": "0407-1414",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20161221",
"EndMarketingDate": "20241108",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020608",
"LabelerName": "GE Healthcare",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-11-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161221",
"EndMarketingDatePackage": "20241108",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE Imaging Bulk Package is indicated for: 1 Computed tomographic (CT) imaging of the head and body by intravenous administration in: adults (300 and 350 mg iodine/mL)pediatric patients (300 mg iodine/mL).",
"Description": "OMNIPAQUE (iohexol) is a nonionic, radiographic contrast agent for intravenous use. OMNIPAQUE is provided as a sterile, pyrogen-free, colorless to pale-yellow solution. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. : 1 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine, 0.1 mg edetate calcium disodium , 2 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine, 0.1 mg edetate calcium disodium ."
},
{
"NDCCode": "0407-1414-84",
"PackageDescription": "10 BOTTLE, PLASTIC in 1 BOX (0407-1414-84) / 100 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "00407-1414-84",
"ProductNDC": "0407-1414",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Omnipaque",
"NonProprietaryName": "Iohexol",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVASCULAR; INTRAVENOUS; ORAL",
"StartMarketingDate": "20060721",
"EndMarketingDate": "20241110",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020608",
"LabelerName": "GE Healthcare Inc.",
"SubstanceName": "IOHEXOL",
"StrengthNumber": "350",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]",
"Status": "Deprecated",
"LastUpdate": "2024-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20060721",
"EndMarketingDatePackage": "20241107",
"SamplePackage": "N",
"IndicationAndUsage": "OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).",
"Description": "OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63323-647-11</NDCCode>
<PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (63323-647-11) > 5 mL in 1 VIAL, SINGLE-USE</PackageDescription>
<NDC11Code>63323-0647-11</NDC11Code>
<ProductNDC>63323-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202231</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/5mL</StrengthUnit>
<Pharm_Classes>l-Thyroxine [EPC],Thyroxine [Chemical/Ingredient]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-11-22</LastUpdate>
</NDC>
<NDC>
<NDCCode>63323-647-10</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-647-10) / 5 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>63323-0647-10</NDC11Code>
<ProductNDC>63323-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Levothyroxine Sodium</ProprietaryName>
<NonProprietaryName>Levothyroxine Sodium Anhydrous</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20110624</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA202231</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE SODIUM ANHYDROUS</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>ug/5mL</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], l-Thyroxine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110624</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Levothyroxine Sodium for Injection is indicated for the treatment of myxedema coma. Important Limitations of Use: The relative bioavailability between Levothyroxine Sodium for Injection and oral levothyroxine products has not been established. Caution should be used when switching patients from oral levothyroxine products to Levothyroxine Sodium for Injection as accurate dosing conversion has not been studied.</IndicationAndUsage>
<Description>Levothyroxine Sodium for Injection contains synthetic crystalline levothyroxine (L-thyroxine) sodium salt. Levothyroxine sodium has an empirical formula of C15H10I4NNaO4, a molecular weight of 798.85 g/mol (anhydrous), and the following structural formula:. Levothyroxine Sodium for Injection is a sterile, preservative-free lyophilized powder consisting of the active ingredient, levothyroxine sodium, and the excipients dibasic sodium phosphate heptahydrate, USP; mannitol, USP; and sodium hydroxide, NF in single dose amber glass vials. Levothyroxine Sodium for Injection is available at three dosage strengths: 100 mcg per vial, 200 mcg per vial and 500 mcg per vial.</Description>
</NDC>
<NDC>
<NDCCode>43598-647-11</NDCCode>
<PackageDescription>1 VIAL in 1 CARTON (43598-647-11) / 20 mL in 1 VIAL</PackageDescription>
<NDC11Code>43598-0647-11</NDC11Code>
<ProductNDC>43598-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Treprostinil</ProprietaryName>
<NonProprietaryName>Treprostinil</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230213</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210214</ApplicationNumber>
<LabelerName>Dr.Reddy's Laboratories Inc.,</LabelerName>
<SubstanceName>TREPROSTINIL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/20mL</StrengthUnit>
<Pharm_Classes>Prostacycline Vasodilator [EPC], Prostaglandins I [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Treprostinil Injection is a sterile solution of treprostinil formulated for subcutaneous or intravenous administration. Treprostinil injection is supplied in 20 mL multidose vials in four strengths, containing 20 mg, 50 mg, 100 mg, or 200 mg (1 mg/mL, 2.5 mg/mL, 5 mg/mL or 10 mg/mL) of treprostinil. Each mL also contains 5.3 mg sodium chloride (except for the 10 mg/mL strength which contains 4.0 mg sodium chloride), 3 mg metacresol, 6.3 mg sodium citrate dihydrate, and water for injection. Sodium hydroxide and hydrochloric acid may be added to adjust pH between 6.0 and 7.2. Treprostinil is chemically stable at room temperature and neutral pH. Treprostinil is (1R,2R,3aS,9aS)-[[2,3,3a,4,9,9a-hexahydro-2-hydroxy-1-[(3S)-3-hydroxyoctyl]-1H-benz[f]inden-5-yl]oxy]acetic acid monohydrate. Treprostinil has a molecular weight of 408.53 and a molecular formula of C23H34O5.H2O. The structural formula of treprostinil is. Sterile Diluent for Tresprostinil Injection is a high-pH (pH-10.4) glycine diluent supplied in a 50 mL vial containing 50 mL of Sterile Diluent for Tresprostinil Injection. Each vial contains 94 mg glycine, 73.3 mg sodium chloride, sodium hydroxide ( to adjust pH), and water for injection.</Description>
</NDC>
<NDC>
<NDCCode>50268-647-14</NDCCode>
<PackageDescription>40 CUP, UNIT-DOSE in 1 TRAY (50268-647-14) / 5 mL in 1 CUP, UNIT-DOSE (50268-647-11) </PackageDescription>
<NDC11Code>50268-0647-14</NDC11Code>
<ProductNDC>50268-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230920</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091483</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-01-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230920</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60687-647-01</NDCCode>
<PackageDescription>100 BLISTER PACK in 1 CARTON (60687-647-01) / 1 TABLET in 1 BLISTER PACK (60687-647-11) </PackageDescription>
<NDC11Code>60687-0647-01</NDC11Code>
<ProductNDC>60687-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ondansetron</ProprietaryName>
<NonProprietaryName>Ondansetron</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220820</StartMarketingDate>
<EndMarketingDate>20240831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077851</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>ONDANSETRON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 3 Receptor Antagonists [MoA], Serotonin-3 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-09-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20220820</StartMarketingDatePackage>
<EndMarketingDatePackage>20240831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Ondansetron tablets are indicated for the prevention of nausea and vomiting associated with: 1 highly emetogenic cancer chemotherapy, including cisplatin greater than or equal to 50 mg/m 2. , 2 initial and repeat courses of moderately emetogenic cancer chemotherapy., 3 radiotherapy in patients receiving either total body irradiation, single high-dose fraction to the abdomen, or daily fractions to the abdomen.</IndicationAndUsage>
<Description>The active ingredient in ondansetron tablets is ondansetron hydrochloride as the dihydrate, the racemic form of ondansetron and a selective blocking agent of the serotonin 5-HT 3 receptor type. Chemically it is (±) 1, 2, 3, 9-tetrahydro-9-methyl-3-[(2-methyl-1H-imidazol-1-yl)methyl]-4H-carbazol-4-one, monohydrochloride, dihydrate. It has the following structural formula:. The empirical formula is C 18H 19N 3OHCl2H 2O, representing a molecular weight of 365.5. Ondansetron hydrochloride dihydrate is a white to off-white powder that is soluble in water and normal saline. Each 4 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 4 mg of ondansetron. Each 8 mg ondansetron tablet, USP for oral administration contains ondansetron hydrochloride dihydrate equivalent to 8 mg of ondansetron. Each tablet also contains the inactive ingredients croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, pregelatinized starch, titanium dioxide, triacetin, and iron oxide yellow (8 mg tablet only). This product meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>68084-647-01</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (68084-647-01) > 10 TABLET in 1 BLISTER PACK (68084-647-11) </PackageDescription>
<NDC11Code>68084-0647-01</NDC11Code>
<ProductNDC>68084-647</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130826</StartMarketingDate>
<EndMarketingDate>20190630</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074112</ApplicationNumber>
<LabelerName>American Health Packaging</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-07-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20130826</StartMarketingDatePackage>
<EndMarketingDatePackage>20190630</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68428-647-11</NDCCode>
<PackageDescription>300 PELLET in 1 BOTTLE, GLASS (68428-647-11) </PackageDescription>
<NDC11Code>68428-0647-11</NDC11Code>
<ProductNDC>68428-647</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Staphysagria</ProprietaryName>
<NonProprietaryName>Delphinium Staphisagria Seed</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20091016</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>DELPHINIUM STAPHISAGRIA SEED</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20091016</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Indications. STAPHYSAG Anger.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>69423-647-11</NDCCode>
<PackageDescription>1150 mL in 1 BOTTLE, PUMP (69423-647-11) </PackageDescription>
<NDC11Code>69423-0647-11</NDC11Code>
<ProductNDC>69423-647</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Head And Shoulders Classic Clean With Vitamin E</ProprietaryName>
<NonProprietaryName>Pyrithione Zinc</NonProprietaryName>
<DosageFormName>SHAMPOO</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220601</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M032</ApplicationNumber>
<LabelerName>The Procter & Gamble Manufacturing Company</LabelerName>
<SubstanceName>PYRITHIONE ZINC</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>helps prevent recurrence of flaking and itching associated with dandruff.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>71052-647-11</NDCCode>
<PackageDescription>100 g in 1 CONTAINER (71052-647-11) </PackageDescription>
<NDC11Code>71052-0647-11</NDC11Code>
<ProductNDC>71052-647</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Escitalopram Oxalate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20210614</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>DARMERICA, LLC</LabelerName>
<SubstanceName>ESCITALOPRAM OXALATE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/10g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2014-02-04</LastUpdate>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>17-JUN-21</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63323-012-11</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-012-11) / 1 mL in 1 VIAL (63323-012-03) </PackageDescription>
<NDC11Code>63323-0012-11</NDC11Code>
<ProductNDC>63323-012</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxytocin</ProprietaryName>
<NonProprietaryName>Oxytocin</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20000810</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018248</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>OXYTOCIN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Increased Uterine Smooth Muscle Contraction or Tone [PE], Oxytocic [EPC], Oxytocin [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Each mL of Oxytocin Injection, USP (synthetic), intended for intravenous infusion or intramuscular injection, possesses an oxytocic activity equivalent to 10 USP Oxytocin Units and contains chlorobutanol anhydrous (chloral derivative) 0.5%. This product may contain up to 12.5% decomposition products/impurities. Oxytocin injection (synthetic) is a sterile, clear, colorless solution of oxytocin in Water for Injection prepared by synthesis. Acetic acid may have been added for pH adjustment (pH 3.0-5.0). The structural formula is.</Description>
</NDC>
<NDC>
<NDCCode>63323-030-11</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63323-030-11) * 10 mL in 1 VIAL, MULTI-DOSE * 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>63323-0030-11</NDC11Code>
<ProductNDC>63323-030</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chorionic Gonadotropin</ProprietaryName>
<NonProprietaryName>Chorionic Gonadotropin</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20110421</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA017067</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2025-04-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HCG HAS NOT BEEN DEMONSTRATED TO BE EFFECTIVE ADJUNCTIVE THERAPY IN THE TREATMENT OF OBESITY. THERE IS NO SUBSTANTIAL EVIDENCE THAT IT INCREASES WEIGHT LOSS BEYOND THAT RESULTING FROM CALORIC RESTRICTION, THAT IT CAUSES A MORE ATTRACTIVE OR ‘‘NORMAL’’ DISTRIBUTION OF FAT, OR THAT IT DECREASES THE HUNGER AND DISCOMFORT ASSOCIATED WITH CALORIE-RESTRICTED DIETS. : 1 1.Prepubertal cryptorchidism not due to anatomical obstruction. In general, HCG is thought to induce testicular descent in situations when descent would have occurred at puberty. HCG thus may help predict whether or not orchiopexy will be needed in the future. Although, in some cases, descent following HCG administration is permanent, in most cases, the response is temporary. Therapy is usually instituted between the ages four and nine., 2 2.Selected cases of hypogonadotropic hypogonadism (hypogonadism secondary to a pituitary deficiency) in males., 3 3.Induction of ovulation and pregnancy in the anovulatory, infertile woman in whom the cause of anovulation is secondary and not due to primary ovarian failure, and who has been appropriately pretreated with human menotropins.</IndicationAndUsage>
<Description>Human chorionic gonadotropin (HCG), a polypeptide hormone produced by the human placenta, is composed of an alpha and a beta sub-unit. The alpha sub-unit is essentially identical to the alpha sub-units of the human pituitary gonadotropins, luteinizing hormone (LH) and follicle-stimulating hormone (FSH), as well as to the alpha sub-unit of human thyroid-stimulating hormone (TSH). The beta sub-units of these hormones differ in amino acid sequence. Chorionic gonadotropin is obtained from the human pregnancy urine. It is standardized by a biological assay procedure. Chorionic Gonadotropin for injection is a sterile lyophilized powder available in multiple dose vials containing 10,000 USP units to be reconstituted with accompanying Bacteriostatic Water for Injection and administered intramuscularly after reconstitution. When reconstituted with 10 mL of the accompanying diluent each vial contains:. Chorionic gonadotropin 10,000 USP units. benzyl alcohol 0.9%. dibasic sodium phosphate 13 mg. mannitol 100 mg. monobasic sodium phosphate 3 mg. water for injection q.s. Buffered with dibasic sodium phosphate and monobasic sodium phosphate. Hydrochloric acid and/or sodium hydroxide may have been used for pH adjustment (6.0-8.0). Nitrogen gas is used in the freeze drying process.</Description>
</NDC>
<NDC>
<NDCCode>63323-064-11</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-11) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-064-04) </PackageDescription>
<NDC11Code>63323-0064-11</NDC11Code>
<ProductNDC>63323-064</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Magnesium Sulfate</ProprietaryName>
<NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20000808</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA019316</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Calculi Dissolution Agent [EPC], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20000808</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Magnesium Sulfate Injection, USP is suitable for replacement therapy in magnesium deficiency, especially in acute hypomagnesemia accompanied by signs of tetany similar to those observed in hypocalcemia. In such cases, the serum magnesium level is usually below the lower limit of normal (1.5 to 2.5 mEq/L) and the serum calcium level is normal (4.3 to 5.3 mEq/L) or elevated. In total parenteral nutrition (TPN), magnesium sulfate may be added to the nutrient admixture to correct or prevent hypomagnesemia which can arise during the course of therapy. Magnesium sulfate injection is also indicated for the prevention and control of seizures in a pre-eclampsia and eclampsia, respectively.</IndicationAndUsage>
<Description>Magnesium Sulfate Injection, USP 50% is a sterile, nonpyrogenic, concentrated solution of magnesium sulfate heptahydrate in Water for Injection. It is administered by the intravenous (IV) or intramuscular (IM) routes as an electrolyte replenisher or anticonvulsant. Must be diluted before IV use. Each mL contains: Magnesium sulfate heptahydrate 500 mg; Water for Injection q.s. Sulfuric acid and/or sodium hydroxide may have been added for pH adjustment. The pH of a 5% solution is between 5.5 and 7.0. (Osmolarity: 4060 mOsmol/L (calc.); 2.03 mM/mL magnesium sulfate anhydrous; 4.06 mEq/mL magnesium sulfate anhydrous). The solution contains no bacteriostat, antimicrobial agent or added buffer (except for pH adjustment) and is intended only for use as a single dose injection. When smaller doses are required the unused portion should be discarded with the entire unit. Magnesium sulfate heptahydrate is chemically designated MgSO 47H 2O, with a molecular weight of 246.47 and occurs as colorless crystals or white powder freely soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>63323-130-11</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-130-11) > 10 mL in 1 VIAL (63323-130-02) </PackageDescription>
<NDC11Code>63323-0130-11</NDC11Code>
<ProductNDC>63323-130</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Doxy 100</ProprietaryName>
<NonProprietaryName>Doxycycline</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20001017</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA062475</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2020-06-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20001017</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Doxycycline for Injection, USP and other antibacterial drugs, Doxycycline for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Doxycycline for Injection, USP is indicated in infections caused by the following microorganisms: : 1 Rickettsiae (Rocky Mountain spotted fever, typhus fever, and the typhus group, Q fever, rickettsial pox and tick fevers). , 2 Mycoplasma pneumoniae (PPLO, Eaton Agent). , 3 Agents of psittacosis and ornithosis. , 4 Agents of lymphogranuloma venereum and granuloma inguinale. , 5 The spirochetal agent of relapsing fever (Borrelia recurrentis). .</IndicationAndUsage>
<Description>Doxycycline for Injection, USP is a sterile, lyophilized powder prepared from a solution of doxycycline hyclate, ascorbic acid and mannitol in Water for Injection. Doxycycline hyclate is a broad spectrum antibiotic derived from oxytetracycline. It is meant for INTRAVENOUS use only after reconstitution. Doxycycline hyclate is a yellowish crystalline powder which is chemically designated 4-(Dimethylamino)-1,4,4a,5,5a,6,11, 12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-de monohydrochloride, compound with ethyl alcohol (2:1), monohydrate. It has the following structural formula:. Doxycycline hyclate is soluble in water and chars at 201°C without melting. The base doxycycline has a high degree of lipid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Each 100 mg vial contains: Doxycycline hyclate equivalent to 100 mg doxycycline; ascorbic acid 480 mg; mannitol 300 mg. pH of the reconstituted solution (10 mg/mL) is between 1.8 and 3.3.</Description>
</NDC>
<NDC>
<NDCCode>63323-162-51</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-162-51) / 1 mL in 1 VIAL (63323-162-11) </PackageDescription>
<NDC11Code>63323-0162-51</NDC11Code>
<ProductNDC>63323-162</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20001018</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075784</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241001</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals (see WARNINGS).</IndicationAndUsage>
<Description>Ketorolac Tromethamine Injection, USP is a member of the pyrrolo-pyrrole group of nonsteroidal anti- inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3- dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol (1:1), and the structural formula is presented in Figure 1. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. The molecular weight of ketorolac tromethamine is 376.40. Ketorolac Tromethamine Injection, USP is available for intravenous (IV) or intramuscular (IM) administration as: 15 mg in 1 mL (1.5%) and 30 mg in 1 mL (3%) in sterile solution; 60 mg in 2 mL (3%) of ketorolac tromethamine in sterile solution is available for intramuscular administration only. The solutions contain 0.1% citric acid, 10% (w/v) alcohol, USP, and 6.68 mg, 4.35 mg, and 8.70 mg, respectively, of sodium chloride in sterile water. The pH range is 6.9 to 7.9 and is adjusted with sodium hydroxide and/or hydrochloric acid. The sterile solutions are clear and slightly yellow in color.</Description>
</NDC>
<NDC>
<NDCCode>63323-165-51</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-165-51) / 1 mL in 1 VIAL (63323-165-11) </PackageDescription>
<NDC11Code>63323-0165-51</NDC11Code>
<ProductNDC>63323-165</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dexamethasone Sodium Phosphate</ProprietaryName>
<NonProprietaryName>Dexamethasone Sodium Phosphate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20000907</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA084916</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXAMETHASONE SODIUM PHOSPHATE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250217</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<Description>Dexamethasone sodium phosphate is a water-soluble inorganic ester of dexamethasone. It occurs as a white or slightly yellow crystalline powder, is odorless or has a slight odor of alcohol, is exceedingly hygroscopic and is freely soluble in water. Dexamethasone sodium phosphate is an adrenocortical steroid anti-inflammatory drug. Chemically, dexamethasone sodium phosphate is 9-Fluoro-11ß,17,21-trihydroxy-16α-methylpregna-1, 4-diene-3,20-dione 21-(dihydrogen phosphate) disodium salt and has the following structural formula. Dexamethasone Sodium Phosphate Injection, USP is a sterile solution of dexamethasone sodium phosphate in water for injection for intravenous (IV), intramuscular (IM), intra-articular, soft-tissue or intralesional use. Each mL contains dexamethasone sodium phosphate equivalent to dexamethasone phosphate 4 mg or dexamethasone 3.33 mg; benzyl alcohol 10 mg added as preservative; sodium citrate dihydrate 11 mg; sodium sulfite 1 mg as an antioxidant; Water for Injection q.s. Citric acid and/or sodium hydroxide may have been added for pH adjustment (7.0 to 8.5). Air in the container is displaced by nitrogen.</Description>
</NDC>
<NDC>
<NDCCode>63323-184-11</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-184-11) > 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0184-11</NDC11Code>
<ProductNDC>63323-184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Folic Acid</ProprietaryName>
<NonProprietaryName>Folic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20000905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA089202</ApplicationNumber>
<LabelerName>APP Pharmaceuticals, LLC</LabelerName>
<SubstanceName>FOLIC ACID</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-02-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>63323-262-36</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-262-36) > 1 mL in 1 VIAL (63323-262-11) </PackageDescription>
<NDC11Code>63323-0262-36</NDC11Code>
<ProductNDC>63323-262</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>20200302</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>5000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-10-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200302</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-286-35</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-286-35) / 30 mL in 1 VIAL, SINGLE-DOSE (63323-286-11) </PackageDescription>
<NDC11Code>63323-0286-35</NDC11Code>
<ProductNDC>63323-286</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL; INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>19960924</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>63323-288-11</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-288-11) / 10 mL in 1 VIAL, SINGLE-DOSE (63323-288-03) </PackageDescription>
<NDC11Code>63323-0288-11</NDC11Code>
<ProductNDC>63323-288</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Naropin</ProprietaryName>
<NonProprietaryName>Ropivacaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>EPIDURAL</RouteName>
<StartMarketingDate>19960924</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020533</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>ROPIVACAINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110531</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>NAROPIN is indicated for the production of local or regional anesthesia for surgery and for acute pain management. Surgical Anesthesia: epidural block for surgery including cesarean section; major nerve block; local infiltration. Acute Pain Management: epidural continuous infusion or intermittent bolus, e.g., postoperative or labor; local infiltration.</IndicationAndUsage>
<Description>NAROPIN® Injection is a sterile, isotonic solution that contains ropivacaine hydrochloride as the active pharmaceutical ingredient. Ropivacaine hydrochloride is a member of the amino amide class of local anesthetics. NAROPIN® Injection is administered parenterally by for infiltration, epidural, and nerve block. Ropivacaine hydrochloride is chemically described as S-(-)-1-propyl-2',6'-pipecoloxylidide hydrochloride monohydrate. The drug substance is a white crystalline powder, with the following structural formula:. At 25 °C ropivacaine hydrochloride has a solubility of 53.8 mg/mL in water, a distribution ratio between n-octanol and phosphate buffer at pH 7.4 of 14:1 and a pKa of 8.07 in 0.1 M KCl solution. The pKa of ropivacaine is approximately the same as bupivacaine (8.1) and is similar to that of mepivacaine (7.7). However, ropivacaine has an intermediate degree of lipid solubility compared to bupivacaine and mepivacaine. NAROPIN (ropivacaine hydrochloride) injection is a clear, colorless, and preservative-free solution. Each mL contains 2.1 mg, 5.3 mg, 7.9 mg or 10.6 mg ropivacaine hydrochloride monohydrate (equivalent to 2.0 mg, 5.0 mg, 7.5 mg or 10 mg of ropivacaine hydrochloride anhydrous), and 8.6 mg, 8.0 mg, 7.5 mg or 7.1 mg of sodium chloride; respectively, and sodium hydroxide and hydrochloric acid as pH adjusters, in water for injection. The pH is adjusted between 4.0 to 6.0. The specific gravity of NAROPIN Injection solutions range from 1.002 to 1.005 at 25°C.</Description>
</NDC>
<NDC>
<NDCCode>63323-367-11</NDCCode>
<PackageDescription>10 VIAL in 1 CARTON (63323-367-11) > 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL (63323-367-01) </PackageDescription>
<NDC11Code>63323-0367-11</NDC11Code>
<ProductNDC>63323-367</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Polymyxin B</ProprietaryName>
<NonProprietaryName>Polymyxin B Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRATHECAL; INTRAVENOUS; OPHTHALMIC</RouteName>
<StartMarketingDate>20150909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202766</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>POLYMYXIN B SULFATE</SubstanceName>
<StrengthNumber>500000</StrengthNumber>
<StrengthUnit>[USP'U]/1</StrengthUnit>
<Pharm_Classes>Polymyxin-class Antibacterial [EPC], Polymyxins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-04-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63323-540-11</NDCCode>
<PackageDescription>25 VIAL in 1 TRAY (63323-540-11) / 10 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0540-11</NDC11Code>
<ProductNDC>63323-540</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Heparin Sodium</ProprietaryName>
<NonProprietaryName>Heparin Sodium</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19720222</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA017029</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>HEPARIN SODIUM</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>[USP'U]/mL</StrengthUnit>
<Pharm_Classes>Anti-coagulant [EPC], Heparin [CS], Unfractionated Heparin [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19990927</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Heparin Sodium Injection is indicated for. Anticoagulant therapy in prophylaxis and treatment of venous thrombosis and its extension;. Low-dose regimen for prevention of postoperative deep venous thrombosis and pulmonary embolism in patients undergoing major abdominothoracic surgery or who, for other reasons, are at risk of developing thromboembolic disease (see DOSAGE AND ADMINISTRATION);. Prophylaxis and treatment of pulmonary embolism;. Atrial fibrillation with embolization;. Treatment of acute and chronic consumptive coagulopathies (disseminated intravascular coagulation);. Prevention of clotting in arterial and cardiac surgery;. Prophylaxis and treatment of peripheral arterial embolism. Heparin may also be employed as an anticoagulant in blood transfusions, extracorporeal circulation, and dialysis procedures.</IndicationAndUsage>
<Description>Heparin is a heterogeneous group of straight-chain anionic mucopolysaccharides, called glycosaminoglycans, having anticoagulant properties. Although others may be present, the main sugars occurring in heparin are: (1) α-L-iduronic acid 2-sulfate, (2) 2-deoxy-2-sulfamino-α-D-glucose 6-sulfate, (3) ß-D-glucuronic acid, (4) 2-acetamido-2-deoxy-α-D-glucose and (5) α-L-iduronic acid. These sugars are present in decreasing amounts, usually in the order (2)> (1)> (4)> (3)> (5), and are joined by glycosidic linkages, forming polymers of varying sizes. Heparin is strongly acidic because of its content of covalently linked sulfate and carboxylic acid groups. In heparin sodium, the acidic protons of the sulfate units are partially replaced by sodium ions. Heparin Sodium Injection, USP is a sterile solution of heparin sodium derived from porcine intestinal mucosa, standardized for anticoagulant activity, in water for injection. It is to be administered by intravenous or deep subcutaneous routes. The potency is determined by a biological assay using a USP reference standard based on units of heparin activity per milligram. Structure of Heparin Sodium (representative subunits). Heparin Sodium Injection, USP (porcine), preservative free, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each 0.5 mL of the 5,000 units per 0.5 mL preparation contains: 5,000 USP Heparin units (porcine); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with benzyl alcohol, is available as follows:. Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 6 mg sodium chloride; 15 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 5 mg sodium chloride; 10.42 mg benzyl alcohol (as a preservative); Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Heparin Sodium Injection, USP (porcine), preserved with parabens, is available as follows:. Each mL of the 1,000 units per mL preparation contains: 1,000 USP Heparin units (porcine); 9 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Made isotonic with sodium chloride. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 5,000 units per mL preparation contains: 5,000 USP Heparin units (porcine); 5 mg sodium chloride; 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 10,000 units per mL preparation contains: 10,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5). Each mL of the 20,000 units per mL preparation contains: 20,000 USP Heparin units (porcine); 1.5 mg methylparaben; 0.15 mg propylparaben; Water for Injection q.s. Hydrochloric acid and/or sodium hydroxide may have been added for pH adjustment (5.0 to 7.5).</Description>
</NDC>
<NDC>
<NDCCode>63323-578-11</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-578-11) / 1 mL in 1 VIAL, SINGLE-DOSE (63323-578-41) </PackageDescription>
<NDC11Code>63323-0578-11</NDC11Code>
<ProductNDC>63323-578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glycopyrrolate</ProprietaryName>
<NonProprietaryName>Glycopyrrolate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20171027</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209328</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GLYCOPYRROLATE</SubstanceName>
<StrengthNumber>.2</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Anticholinergic [EPC], Cholinergic Antagonists [MoA], Cholinergic Muscarinic Antagonist [EPC], Cholinergic Muscarinic Antagonists [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171027</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Anesthesia. Glycopyrrolate Injection is indicated for use as a preoperative antimuscarinic to reduce salivary, tracheobronchial, and pharyngeal secretions; to reduce the volume and free acidity of gastric secretions; and to block cardiac vagal inhibitory reflexes during induction of anesthesia and intubation. When indicated, Glycopyrrolate Injection may be used intraoperatively to counteract surgically or drug induced or vagal reflexes associated arrhythmias. Glycopyrrolate protects against the peripheral muscarinic effects (e.g., bradycardia and excessive secretions) of cholinergic agents such as neostigmine and pyridostigmine given to reverse the neuromuscular blockade due to non-depolarizing muscle relaxants. Peptic Ulcer. For use in adults as adjunctive therapy for the treatment of peptic ulcer when rapid anticholinergic effect is desired or when oral medication is not tolerated.</IndicationAndUsage>
<Description>Glycopyrrolate Injection, USP is a synthetic anticholinergic agent. Each 1 mL contains: Glycopyrrolate, 0.2 mg; water for injection, q.s.; benzyl alcohol, 0.9% (preservative); pH adjusted, when necessary, with hydrochloric acid and/or sodium hydroxide.Glycopyrrolate is a quaternary ammonium salt with the following chemical name: 3[(cyclopentylhydroxyphenylacetyl)oxy]-1,1-dimethyl pyrrolidinium bromide.Its structural formula is as follows: C19H28BrNO3 M.W. 398.33Glycopyrrolate occurs as a white, odorless crystalline powder. It is soluble in water and alcohol, and practically insoluble in chloroform and ether. Unlike atropine, glycopyrrolate is completely ionized at physiological pH values. Glycopyrrolate Injection, USP is a clear, colorless, sterile liquid; pH 2.0 to 3.0. The partition coefficient of glycopyrrolate in a n-octanol /water system is 0.304 (log10 P= -1.52) at ambient room temperature (24°C).</Description>
</NDC>
<NDC>
<NDCCode>63323-596-13</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-596-13) > 1 mL in 1 VIAL, SINGLE-DOSE (63323-596-11) </PackageDescription>
<NDC11Code>63323-0596-13</NDC11Code>
<ProductNDC>63323-596</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Glucagon</ProprietaryName>
<NonProprietaryName>Glucagon</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20150508</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA201849</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>GLUCAGON HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antihypoglycemic Agent [EPC], Decreased GI Motility [PE], Decreased GI Smooth Muscle Tone [PE], Decreased Glycolysis [PE], Gastrointestinal Motility Inhibitor [EPC], Increased Gluconeogenesis [PE], Increased Glycogenolysis [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-11-18</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150508</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Glucagon for Injection is an antihypoglycemic agent and a gastrointestinal motility inhibitor indicated: : 1 for the treatment of severe hypoglycemia in pediatric and adult patients with diabetes (1.1) , 2 as a diagnostic aid for use during radiologic examinations to temporarily inhibit movement of the gastrointestinal tract in adult patients (1.2) .</IndicationAndUsage>
<Description>Glucagon is an antihypoglycemic agent and a gastrointestinal motility inhibitor. It is produced by solid phase peptide synthesis. The chemical structure of the glucagon is identical to human glucagon. Glucagon is a single-chain polypeptide containing 29 amino acid residues. The structure of glucagon is:. Glucagon for Injection is a sterile, lyophilized white powder in a 3 mL vial for subcutaneous, intramuscular or intravenous use. The reconstituted solution contains glucagon as hydrochloride 1 mg per mL and lactose monohydrate (107 mg). Glucagon for Injection is supplied at pH 2.5 to 3.5 and is soluble in water.</Description>
</NDC>
<NDC>
<NDCCode>63323-733-11</NDCCode>
<PackageDescription>1 VIAL, MULTI-DOSE in 1 BOX (63323-733-11) / 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>63323-0733-11</NDC11Code>
<ProductNDC>63323-733</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Mesna</ProprietaryName>
<NonProprietaryName>Mesna</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010905</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075811</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>MESNA</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-22</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010905</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Mesna Injection is indicated as a prophylactic agent in reducing the incidence of ifosfamide-induced hemorrhagic cystitis. Limitation of Use:Mesna Injection is not indicated to reduce the risk of hematuria due to other pathological conditions such as thrombocytopenia.</IndicationAndUsage>
<Description>Mesna Injection is a detoxifying agent to inhibit the hemorrhagic cystitis induced by ifosfamide. The active ingredient, mesna, is a synthetic sulfhydryl compound designated as sodium-2-mercaptoethane sulfonate with a molecular formula of C2H5NaO3S2 and a molecular weight of 164.18. Its structural formula is as follows:HS–CH2–CH2SO3–Na+ Mesna Injection is a sterile, nonpyrogenic, aqueous solution of clear and colorless appearance in clear glass multiple dose vials for intravenous administration. Mesna Injection contains 100 mg/mL mesna, 0.25 mg/mL edetate disodium and sodium hydroxide for pH adjustment. Mesna Injection multiple dose vials also contain 10.4 mg/mL of benzyl alcohol as a preservative. The solution has a pH range of 6.5 to 8.5.</Description>
</NDC>
<NDC>
<NDCCode>63323-739-12</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-739-12) > 2 mL in 1 VIAL, SINGLE-DOSE (63323-739-11) </PackageDescription>
<NDC11Code>63323-0739-12</NDC11Code>
<ProductNDC>63323-739</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Famotidine</ProprietaryName>
<NonProprietaryName>Famotidine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20010315</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075813</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>FAMOTIDINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Histamine H2 Receptor Antagonists [MoA], Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-11-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20010315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Famotidine Injection, supplied as a concentrated solution for intravenous injection, is intended for intravenous use only. Famotidine Injection is indicated in some hospitalized patients with pathological hypersecretory conditions or intractable ulcers, or as an alternative to the oral dosage forms for short term use in patients who are unable to take oral medication for the following conditions: : 1 Short term treatment of active duodenal ulcer. Most adult patients heal within 4 weeks; there is rarely reason to use famotidine at full dosage for longer than 6 to 8 weeks. Studies have not assessed the safety of famotidine in uncomplicated active duodenal ulcer for periods of more than 8 weeks. , 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of an active ulcer. Controlled studies in adults have not extended beyond one year. , 3 Short term treatment of active benign gastric ulcer. Most adult patients heal within 6 weeks. Studies have not assessed the safety or efficacy of famotidine in uncomplicated active benign gastric ulcer for periods of more than 8 weeks. , 4 Short term treatment of gastroesophageal reflux disease (GERD). Famotidine is indicated for short term treatment of patients with symptoms of GERD (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). Famotidine is also indicated for the short term treatment of esophagitis due to GERD including erosive or ulcerative disease diagnosed by endoscopy (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). , 5 Treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison Syndrome, multiple endocrine adenomas) (see CLINICAL PHARMACOLOGY IN ADULTS, Clinical Studies). .</IndicationAndUsage>
<Description>The active ingredient in Famotidine Injection, USP is a histamine H2–receptor antagonist. Famotidine is [1-Amino-3-[[[2- [(diaminomethylene)amino]-4-thiazolyl]methyl]thio]propylidene] sulfamide. Its structural formula is:. Famotidine is a white to pale yellow crystalline compound that is freely soluble in glacial acetic acid, slightly soluble in methanol, very slightly soluble in water, and practically insoluble in ethanol. Famotidine Injection, USP is supplied as a sterile concentrated solution for intravenous injection. Each mL of the solution contains 10 mg of famotidine and the following inactive ingredients: L-aspartic acid 4 mg, mannitol 20 mg, Water for Injection q.s. 1 mL.</Description>
</NDC>
<NDC>
<NDCCode>63323-806-01</NDCCode>
<PackageDescription>25 VIAL, SINGLE-DOSE in 1 CARTON (63323-806-01) / 1 mL in 1 VIAL, SINGLE-DOSE (63323-806-11) </PackageDescription>
<NDC11Code>63323-0806-01</NDC11Code>
<ProductNDC>63323-806</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20190503</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210762</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>.05</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-02-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190503</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: : 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises. , 2 use as a narcotic analgesic supplement in general or regional anesthesia. , 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia. , 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures. .</IndicationAndUsage>
<Description>Fentanyl Citrate Injection is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl) propionanilide citrate (1:1) with the following structural formula:. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 to 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>63323-808-11</NDCCode>
<PackageDescription>10 SYRINGE in 1 CARTON (63323-808-11) / 1 mL in 1 SYRINGE (63323-808-01) </PackageDescription>
<NDC11Code>63323-0808-11</NDC11Code>
<ProductNDC>63323-808</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Fentanyl Citrate</ProprietaryName>
<NonProprietaryName>Fentanyl Citrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20200930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA212086</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>FENTANYL CITRATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2025-11-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200930</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Fentanyl Citrate Injection is indicated for: 1 analgesic action of short duration during the anesthetic periods, premedication, induction and maintenance, and in the immediate postoperative period (recovery room) as the need arises., 2 use as a narcotic analgesic supplement in general or regional anesthesia., 3 administration with a neuroleptic as an anesthetic premedication, for the induction of anesthesia and as an adjunct in the maintenance of general and regional anesthesia., 4 use as an anesthetic agent with oxygen in selected high-risk patients, such as those undergoing open heart surgery or certain complicated neurological or orthopedic procedures.</IndicationAndUsage>
<Description>Fentanyl Citrate Injection, USP, is an opioid agonist, available as a sterile, non-pyrogenic solution containing fentanyl citrate as the active pharmaceutical ingredient, for intravenous or intramuscular administration. Fentanyl citrate is chemically identified as N-(1-Phenethyl-4-piperidyl)propionanilide citrate (1:1) with the following structural formula. C22H28N2O C6H8O7 Molecular Weight is 528.59. Each mL contains fentanyl citrate equivalent to 50 mcg fentanyl base in Water for Injection. Sodium hydroxide and/or hydrochloric acid added, if needed, for pH adjustment. The pH range is 4.0 to 7.5. Contains no preservative.</Description>
</NDC>
<NDC>
<NDCCode>0407-1412-38</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1412-38) / 50 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1412-38</NDC11Code>
<ProductNDC>0407-1412</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRATHECAL; INTRAVASCULAR; INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20050811</StartMarketingDate>
<EndMarketingDate>20241110</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA018956</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20050811</StartMarketingDatePackage>
<EndMarketingDatePackage>20241110</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).</IndicationAndUsage>
<Description>OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium.</Description>
</NDC>
<NDC>
<NDCCode>0407-1414-48</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1414-48) / 500 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1414-48</NDC11Code>
<ProductNDC>0407-1414</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20161221</StartMarketingDate>
<EndMarketingDate>20241108</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020608</ApplicationNumber>
<LabelerName>GE Healthcare</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161221</StartMarketingDatePackage>
<EndMarketingDatePackage>20241108</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE Imaging Bulk Package is indicated for: 1 Computed tomographic (CT) imaging of the head and body by intravenous administration in: adults (300 and 350 mg iodine/mL)pediatric patients (300 mg iodine/mL).</IndicationAndUsage>
<Description>OMNIPAQUE (iohexol) is a nonionic, radiographic contrast agent for intravenous use. OMNIPAQUE is provided as a sterile, pyrogen-free, colorless to pale-yellow solution. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. : 1 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine, 0.1 mg edetate calcium disodium , 2 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine, 0.1 mg edetate calcium disodium .</Description>
</NDC>
<NDC>
<NDCCode>0407-1414-84</NDCCode>
<PackageDescription>10 BOTTLE, PLASTIC in 1 BOX (0407-1414-84) / 100 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>00407-1414-84</NDC11Code>
<ProductNDC>0407-1414</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Omnipaque</ProprietaryName>
<NonProprietaryName>Iohexol</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVASCULAR; INTRAVENOUS; ORAL</RouteName>
<StartMarketingDate>20060721</StartMarketingDate>
<EndMarketingDate>20241110</EndMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020608</ApplicationNumber>
<LabelerName>GE Healthcare Inc.</LabelerName>
<SubstanceName>IOHEXOL</SubstanceName>
<StrengthNumber>350</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Radiographic Contrast Agent [EPC], X-Ray Contrast Activity [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20060721</StartMarketingDatePackage>
<EndMarketingDatePackage>20241107</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>OMNIPAQUE (iohexol) injection is a radiographic contrast agent indicated for intrathecal, intravascular, oral, rectal, intraarticular and body cavity use. OMNIPAQUE oral solution is indicated for oral use only in conjunction with OMNIPAQUE injection administered intravenously for computed tomography (CT) of the abdomen ( 1).</IndicationAndUsage>
<Description>OMNIPAQUE (iohexol) injection is a nonionic, x-ray or radiographic contrast medium for intrathecal, intravenous, oral, rectal and body cavity use. OMNIPAQUE oral solution is for oral use only. OMNIPAQUE injection and OMNIPAQUE oral solution are both provided as sterile, pyrogen-free and gluten-free solutions. OMNIPAQUE injection and OMNIPAQUE oral solution are colorless to pale yellow solutions. The chemical name of iohexol is Bis(2,3-dihydroxypropyl)-5-[ N-(2,3-dihydroxypropyl)-acetamido]-2,4,6- triiodoisophthalamide with a molecular weight of 821.14 (iodine content 46.36%). Iohexol has the following structural formula:. OMNIPAQUE injection is available in five strengths: 1 OMNIPAQUE 140 mg iodine/mL (302 mg of iohexol/mL): Each mL contains 140 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 2 OMNIPAQUE 180 mg iodine/mL (388 mg of iohexol/mL): Each mL contains 180 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 3 OMNIPAQUE 240 mg iodine/mL (518 mg of iohexol/mL): Each mL contains 240 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 4 OMNIPAQUE 300 mg iodine/mL (647 mg of iohexol/mL): Each mL contains 300 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium, 5 OMNIPAQUE 350 mg iodine/mL (755 mg of iohexol/mL): Each mL contains 350 mg organically bound iodine, 1.21 mg tromethamine and 0.1 mg edetate calcium disodium.</Description>
</NDC>
</NDCList>