RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>63323-651-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-651-20)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0651-20</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077897</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adenosine injection, USP is indicated as an adjunct to thallium-201 myocardial perfusion scintigraphy in patients unable to exercise adequately.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine.  Adenosine has the following structural formula. C10H13N5O4              M.W. 267.25. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-651-02</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 TRAY (63323-651-02)  / 2 mL in 1 VIAL, SINGLE-USE (63323-651-00) </PackageDescription>
    <NDC11Code>63323-0651-02</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20051123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077133</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous adenosine injection is indicated for the following. Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome).  When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine injection administration. It is important to be sure the adenosine injection solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION). Adenosine injection does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm.  In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine injection administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body.  It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol.  Solubility increases by warming and lowering the pH.  Adenosine is not chemically related to other antiarrhythmic drugs.  Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection.  Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection.  The pH of the solution is between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-651-04</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-USE in 1 TRAY (63323-651-04)  / 4 mL in 1 VIAL, SINGLE-USE (63323-651-01) </PackageDescription>
    <NDC11Code>63323-0651-04</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20051123</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077133</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-08-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20051123</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous adenosine injection is indicated for the following. Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome).  When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine injection administration. It is important to be sure the adenosine injection solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION). Adenosine injection does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm.  In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine injection administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body.  It is chemically 6-amino-9-ß-D-ribofuranosyl-9-H-purine and has the following structural formula. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol.  Solubility increases by warming and lowering the pH.  Adenosine is not chemically related to other antiarrhythmic drugs.  Adenosine Injection is a sterile, nonpyrogenic solution for rapid bolus intravenous injection.  Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection.  The pH of the solution is between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-651-30</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-651-30)  / 30 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0651-30</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171127</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077897</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-04-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171127</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Adenosine injection, USP is indicated as an adjunct to thallium-201 myocardial perfusion scintigraphy in patients unable to exercise adequately.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside and is chemically described as 6-amino-9-beta-D-ribofuranosyl-9-H-purine.  Adenosine has the following structural formula. C10H13N5O4              M.W. 267.25. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol. Solubility increases by warming and lowering the pH of the solution. Each adenosine injection, USP vial contains a sterile, nonpyrogenic solution of adenosine 60 mg/20 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection or 90 mg/30 mL (3 mg/mL) and sodium chloride 9 mg/mL in water for injection with a pH between 4.5 and 7.5.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-651-89</NDCCode>
    <PackageDescription>10 SYRINGE, PLASTIC in 1 CARTON (63323-651-89)  &gt; 2 mL in 1 SYRINGE, PLASTIC (63323-651-21) </PackageDescription>
    <NDC11Code>63323-0651-89</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180416</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205568</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2019-03-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180416</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous adenosine injection, USP is indicated for the following. Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome).  When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine injection, USP administration. It is important to be sure the adenosine injection, USP solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION). Adenosine injection, USP does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm.  In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine injection, USP administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body.  It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula. C10H13N5O4                            M.W. 267.24. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol.  Solubility increases by warming and lowering the pH.  Adenosine is not chemically related to other antiarrhythmic drugs.  Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection.  Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection.  The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer.  Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-651-90</NDCCode>
    <PackageDescription>10 SYRINGE, PLASTIC in 1 CARTON (63323-651-90)  &gt; 4 mL in 1 SYRINGE, PLASTIC (63323-651-23) </PackageDescription>
    <NDC11Code>63323-0651-90</NDC11Code>
    <ProductNDC>63323-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Adenosine</ProprietaryName>
    <NonProprietaryName>Adenosine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20180416</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA205568</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>ADENOSINE</SubstanceName>
    <StrengthNumber>3</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Adenosine Receptor Agonist [EPC], Adenosine Receptor Agonists [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2019-03-29</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20180416</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Intravenous adenosine injection, USP is indicated for the following. Conversion to sinus rhythm of paroxysmal supraventricular tachycardia (PSVT), including that associated with accessory bypass tracts (Wolff-Parkinson-White Syndrome).  When clinically advisable, appropriate vagal maneuvers (e.g., Valsalva maneuver), should be attempted prior to adenosine injection, USP administration. It is important to be sure the adenosine injection, USP solution actually reaches the systemic circulation (see DOSAGE AND ADMINISTRATION). Adenosine injection, USP does not convert atrial flutter, atrial fibrillation, or ventricular tachycardia to normal sinus rhythm.  In the presence of atrial flutter or atrial fibrillation, a transient modest slowing of ventricular response may occur immediately following adenosine injection, USP administration.</IndicationAndUsage>
    <Description>Adenosine is an endogenous nucleoside occurring in all cells of the body.  It is chemically 6-amino-9-β-D-ribofuranosyl-9-H-purine and has the following structural formula. C10H13N5O4                            M.W. 267.24. Adenosine is a white crystalline powder.  It is soluble in water and practically insoluble in alcohol.  Solubility increases by warming and lowering the pH.  Adenosine is not chemically related to other antiarrhythmic drugs.  Adenosine injection, USP is a sterile, nonpyrogenic solution for rapid bolus intravenous injection.  Each mL contains 3 mg adenosine and 9 mg sodium chloride in water for injection.  The pH of the solution is between 4.5 and 7.5. The TopPac® plastic syringe is molded from a specially formulated cyclo olefin copolymer.  Water permeates from inside the container at an extremely slow rate which will have an insignificant effect on solution concentration over the expected shelf life. Solutions in contact with the plastic container may leach out certain chemical components from the plastic in very small amounts which have been toxicologically assessed and are within the safety margins.</Description>
  </NDC>
  <NDC>
    <NDCCode>51079-651-20</NDCCode>
    <PackageDescription>100 BLISTER PACK in 1 CARTON (51079-651-20)  / 1 CAPSULE in 1 BLISTER PACK (51079-651-01) </PackageDescription>
    <NDC11Code>51079-0651-20</NDC11Code>
    <ProductNDC>51079-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxepin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Doxepin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19980602</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA070791</ApplicationNumber>
    <LabelerName>Mylan Institutional Inc.</LabelerName>
    <SubstanceName>DOXEPIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tricyclic Antidepressant [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-07-22</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>19980602</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Doxepin Hydrochloride Capsules, USP are recommended for the treatment of: 1 Psychoneurotic patients with depression and/or anxiety., 2 Depression and/or anxiety associated with alcoholism (not to be taken concomitantly with alcohol)., 3 Depression and/or anxiety associated with organic disease (the possibility of drug interaction should be considered if the patient is receiving other drugs concomitantly)., 4 Psychotic depressive disorders with associated anxiety including involutional depression and manic-depressive disorders.</IndicationAndUsage>
    <Description>Doxepin hydrochloride is one of a class of psychotherapeutic agents known as dibenzoxepin tricyclic compounds. The molecular formula of the compound is C 19H 21NO  HCl having a molecular weight of 315.84. It is a white crystalline powder freely soluble in water, in ethanol (96%), and methylene chloride. It may be represented by the following structural formula:. Chemically, doxepin hydrochloride is a dibenzoxepin derivative and is the first of a family of tricyclic psychotherapeutic agents. Specifically, it is an isomeric mixture of 1-Propanamine, 3-dibenz[ b,e]oxepin-11 (6 H)ylidene- N,N-dimethyl-hydrochloride. Each 10 mg, 25 mg, 50 mg, 75 mg and 100 mg doxepin capsule for oral administration contains doxepin hydrochloride, USP equivalent to 10 mg, 25 mg, 50 mg, 75 mg and 100 mg of doxepin, respectively and the following inactive ingredients: colloidal silicon dioxide, magnesium stearate, microcrystalline cellulose, pregelatinized starch (corn) and sodium lauryl sulfate. The empty gelatin capsule shells contain D&amp;C Yellow No. 10, gelatin, sodium lauryl sulfate and titanium dioxide. In addition, the 10 mg, 25 mg and 50 mg empty gelatin capsule shells contain FD&amp;C Yellow No. 6 and the 75 mg and 100 mg empty gelatin capsule shells contain FD&amp;C Green No. 3. The imprinting ink contains black iron oxide, D&amp;C Yellow No. 10 Aluminum Lake, FD&amp;C Blue No. 1 Aluminum Lake, FD&amp;C Blue No. 2 Aluminum Lake, FD&amp;C Red No. 40 Aluminum Lake, propylene glycol and shellac glaze.</Description>
  </NDC>
  <NDC>
    <NDCCode>60760-651-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BOTTLE, PLASTIC (60760-651-20) </PackageDescription>
    <NDC11Code>60760-0651-20</NDC11Code>
    <ProductNDC>60760-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20220809</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207773</ApplicationNumber>
    <LabelerName>ST. MARY'S MEDICAL PARK PHARMACY</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-05-05</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220809</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain effectiveness of doxycycline hyclate tablets and other antibacterial drugs, doxycycline hyclate tablets should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.   In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Doxycycline hyclate is an antibacterial drug synthetically derived from oxytetracycline. The chemical designation for doxycyclin is 4-(Dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,5,10,12,12a-pentahydroxy-6-methyl-1,11-dioxo-2-naphthacene-carboxamide  monohydrate. Doxycycline hyclate is yellow to light yellow powder. It is freely soluble in water and methanol, sparingly soluble in alcohol; practically insoluble in chloroform and in ether. It dissolves in aqueous solution of alkali hydroxides and carbonates. Doxycycline has a high degree of lipoid solubility and a low affinity for calcium binding. It is highly stable in normal human serum. Doxycycline will not degrade into an epianhydro form. The structural formula is as follows. Each film-coated tablet for oral administration contains doxycycline hyclate equivalent to 100 mg of doxycycline (anhydrous).  Inactive ingredients are: anhydrous lactose, croscarmellose sodium, colloidal silicon dioxide, hypromellose, iron oxide yellow , iron oxide red, microcrystalline cellulose, magnesium stearate, polyethylene glycol, pregelatinised starch and titanium dioxide.</Description>
  </NDC>
  <NDC>
    <NDCCode>61919-651-20</NDCCode>
    <PackageDescription>20 TABLET, EXTENDED RELEASE in 1 BOTTLE (61919-651-20) </PackageDescription>
    <NDC11Code>61919-0651-20</NDC11Code>
    <ProductNDC>61919-651</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Mucinex</ProprietaryName>
    <NonProprietaryName>Mucinex</NonProprietaryName>
    <DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20140101</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA021282</ApplicationNumber>
    <LabelerName>DIRECT RX</LabelerName>
    <SubstanceName>GUAIFENESIN</SubstanceName>
    <StrengthNumber>600</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20150101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>63307-651-99</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (63307-651-99)  *  118 mL in 1 BOTTLE (59316-102-20)  *  36  in 1 PACKAGE (025715696263)  *  60 TABLET in 1 BOTTLE, PLASTIC (33261-085-60)</PackageDescription>
    <NDC11Code>63307-0651-99</NDC11Code>
    <ProductNDC>63307-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Napropak Cool</ProprietaryName>
    <NonProprietaryName>Naproxen Sodium, Menthol, Unspecified Form, And Finger Cots</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20070426</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA078432</ApplicationNumber>
    <LabelerName>Total Pharmacy Supply, Inc.</LabelerName>
    <Status>Deprecated</Status>
    <LastUpdate>2015-12-11</LastUpdate>
  </NDC>
  <NDC>
    <NDCCode>67046-651-20</NDCCode>
    <PackageDescription>20 TABLET in 1 BLISTER PACK (67046-651-20) </PackageDescription>
    <NDC11Code>67046-0651-20</NDC11Code>
    <ProductNDC>67046-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Ranitidine</ProprietaryName>
    <NonProprietaryName>Ranitidine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20100630</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA077824</ApplicationNumber>
    <LabelerName>Contract Pharmacy Services-PA</LabelerName>
    <SubstanceName>RANITIDINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Histamine H2 Receptor Antagonists [MoA],Histamine-2 Receptor Antagonist [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-01-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170927</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Ranitidine Tablets, USP are indicated in: 1 Short-term treatment of active duodenal ulcer. Most patients heal within 4 weeks. Studies available to date have not assessed the safety of ranitidine in uncomplicated duodenal ulcer for periods of more than 8 weeks., 2 Maintenance therapy for duodenal ulcer patients at reduced dosage after healing of acute ulcers. No placebo-controlled comparative studies have been carried out for periods of longer than 1 year., 3 The treatment of pathological hypersecretory conditions (e.g., Zollinger-Ellison syndrome and systemic mastocytosis)., 4 Short-term treatment of active, benign gastric ulcer. Most patients heal within 6 weeks and the usefulness of further treatment has not been demonstrated. Studies available to date have not assessed the safety of ranitidine in uncomplicated, benign gastric ulcer for periods of more than 6 weeks., 5 Maintenance therapy for gastric ulcer patients at reduced dosage after healing of acute ulcers. Placebo-controlled studies have been carried out for 1 year., 6 Treatment of GERD. Symptomatic relief commonly occurs within 24 hours after starting therapy with Ranitidine Tablets, USP 150 mg b.i.d., 7 Treatment of endoscopically diagnosed erosive esophagitis. Symptomatic relief of heartburn commonly occurs within 24 hours of therapy initiation with Ranitidine Tablets, USP 150 mg q.i.d., 8 Maintenance of healing of erosive esophagitis. Placebo-controlled trials have been carried out for 48 weeks.</IndicationAndUsage>
    <Description>The active ingredient in Ranitidine Tablets, USP 150 mg and Ranitidine Tablets, USP 300 mg is ranitidine hydrochloride (HCl), USP, a histamine H 2-receptor antagonist. Chemically it is N[2-[[[5-[(dimethylamino)methyl]-2-furanyl]methyl]thio]ethyl]-N'-methyl-2-nitro-1,1-ethenediamine, HCl. It has the following structure:. The empirical formula is C 13H 22N 4O 3S·HCl, representing a molecular weight of 350.87. Ranitidine HCl is a white to pale yellow, granular substance that is soluble in water. It has a slightly bitter taste and sulfurlike odor. Each Ranitidine Tablets, USP 150 mg for oral administration contains 167.4 mg of ranitidine HCl equivalent to 150 mg of ranitidine. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, titanium dioxide, triethyl citrate and FD&amp;C Yellow #6. Each Ranitidine Tablets, USP 300 mg for oral administration contains 334.8 mg of ranitidine HCl equivalent to 300 mg of ranitidine. Each tablet also contains the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hypromellose, magnesium stearate, microcrystalline cellulose, polydextrose, titanium dioxide, triethyl citrate and D&amp;C Yellow #10.</Description>
  </NDC>
  <NDC>
    <NDCCode>67405-651-02</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE (67405-651-02)</PackageDescription>
    <NDC11Code>67405-0651-02</NDC11Code>
    <ProductNDC>67405-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Doxycycline Hyclate</ProprietaryName>
    <NonProprietaryName>Doxycycline Hyclate</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19840911</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062500</ApplicationNumber>
    <LabelerName>Harris Pharmaceutical, Inc</LabelerName>
    <SubstanceName>DOXYCYCLINE HYCLATE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Tetracycline-class Drug [EPC],Tetracyclines [CS]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>68001-651-37</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-USE in 1 CARTON (68001-651-37)  / 20 mL in 1 VIAL, SINGLE-USE</PackageDescription>
    <NDC11Code>68001-0651-37</NDC11Code>
    <ProductNDC>68001-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Paclitaxel Protein-bound Particles For Injectable Suspension (albumin-bound)</ProprietaryName>
    <NonProprietaryName>Paclitaxel</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SUSPENSION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20250718</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA216355</ApplicationNumber>
    <LabelerName>BluePoint Laboratories</LabelerName>
    <SubstanceName>PACLITAXEL</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/20mL</StrengthUnit>
    <Pharm_Classes>Microtubule Inhibition [PE], Microtubule Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-08-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250718</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is a microtubule inhibitor indicated for the treatment of: 1 Metastatic breast cancer, after failure of combination chemotherapy for metastatic disease or relapse within 6 months of adjuvant chemotherapy. Prior therapy should have included an anthracycline unless clinically contraindicated. ( 1.1) , 2 Locally advanced or metastatic non-small cell lung cancer (NSCLC), as first-line treatment in combination with carboplatin, in patients who are not candidates for curative surgery or radiation therapy. ( 1.2) , 3 Metastatic adenocarcinoma of the pancreas as first-line treatment, in combination with gemcitabine. ( 1.3) .</IndicationAndUsage>
    <Description>Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is paclitaxel formulated as albumin-bound nanoparticles with a mean particle size of approximately 130 nanometers. Paclitaxel exists in the particles in a non-crystalline, amorphous state. Paclitaxel is a microtubule inhibitor. The chemical name for paclitaxel is 5β,20-Epoxy-1,2α,4,7β,10β,13α-hexahydroxytax-11-en-9-one 4,10-diacetate 2-benzoate 13-ester with (2 R,3 S)- N-benzoyl-3-phenylisoserine. The empirical formula is C 47H 51NO 14and the molecular weight is 853.91. Paclitaxel has the following structural formula:. Paclitaxel is a white to off-white crystalline powder. It is highly lipophilic, insoluble in water, and melts at approximately 216°C to 217°C. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is supplied as a white to yellow, sterile, lyophilized powder for reconstitution with 20 mL of 0.9% Sodium Chloride Injection, USP prior to intravenous infusion. Each single‑dose vial contains 100 mg of paclitaxel (bound to human albumin) and approximately 900 mg of human albumin (containing sodium caprylate and sodium acetyltryptophanate). Each milliliter (mL) of reconstituted suspension contains 5 mg paclitaxel formulated as albumin‑bound particles. Paclitaxel protein-bound particles for injectable suspension (albumin-bound) is free of solvents.</Description>
  </NDC>
  <NDC>
    <NDCCode>71205-651-20</NDCCode>
    <PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (71205-651-20) </PackageDescription>
    <NDC11Code>71205-0651-20</NDC11Code>
    <ProductNDC>71205-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Amoxicillin And Clavulanate Potassium</ProprietaryName>
    <NonProprietaryName>Amoxicillin And Clavulanate Potassium</NonProprietaryName>
    <DosageFormName>TABLET, FILM COATED</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200501</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065063</ApplicationNumber>
    <LabelerName>Proficient Rx LP</LabelerName>
    <SubstanceName>AMOXICILLIN; CLAVULANATE POTASSIUM</SubstanceName>
    <StrengthNumber>875; 125</StrengthNumber>
    <StrengthUnit>mg/1; mg/1</StrengthUnit>
    <Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS], beta Lactamase Inhibitor [EPC], beta Lactamase Inhibitors [MoA]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-05-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220421</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of amoxicillin and clavulanate potassium and other antibacterial drugs, amoxicillin and clavulanate potassium should be used only to treat infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Amoxicillin and clavulanate potassium tablets are a combination penicillin-class antibacterial and beta-lactamase inhibitor indicated in the treatment of infections due to susceptible isolates of the designated bacteria in the conditions listed below.</IndicationAndUsage>
    <Description>Amoxicillin and clavulanate potassium tablets, USP are an oral antibacterial combination consisting of amoxicillin and the beta-lactamase inhibitor, clavulanate potassium (the potassium salt of clavulanic acid). Amoxicillin is an analog of ampicillin, derived from the basic penicillin nucleus, 6-aminopenicillanic acid. The amoxicillin molecular formula is C16H19N3O5S3H2O, and the molecular weight is 419.46. Chemically, amoxicillin is (2S,5R,6R)-6-[(R)-(-)-2-Amino-2-(phydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4-thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate and may be represented structurally as. Clavulanic acid is produced by the fermentation of Streptomyces clavuligerus. It is a beta-lactam structurally related to the penicillins and possesses the ability to inactivate some beta-lactamases by blocking the active sites of these enzymes. The clavulanate potassium molecular formula is C8H8KNO5, and the molecular weight is 237.25. Chemically, clavulanate potassium is potassium (Z)(2R,5R)-3-(2-hydroxyethylidene)-7-oxo-4-oxa-1-azabicyclo[3.2.0]-heptane-2-carboxylate and may be represented structurally as. Inactive Ingredients. Colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, titanium dioxide, triethyl citrate, ethylcellulose, cetyl alcohol and sodium lauryl sulfate. In addition, the 875 mg/125 mg tablet contains crospovidone. Each tablet of amoxicillin and clavulanate potassium contains 0.63 mEq potassium.</Description>
  </NDC>
  <NDC>
    <NDCCode>83634-651-20</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 CARTON (83634-651-20)  / 20 mL in 1 VIAL, MULTI-DOSE (83634-651-42) </PackageDescription>
    <NDC11Code>83634-0651-20</NDC11Code>
    <ProductNDC>83634-651</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
    <NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INFILTRATION; PERINEURAL</RouteName>
    <StartMarketingDate>20250701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA219535</ApplicationNumber>
    <LabelerName>Avenacy, LLC</LabelerName>
    <SubstanceName>LIDOCAINE HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-02-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20260215</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
    <Description>Lidocaine hydrochloride injection, USP contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride injection, USP is by injection, for infiltration, nerve block, epidural and caudal use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Dosage forms listed as lidocaine hydrochloride injection, USP – MPF indicate single-dose solutions that are Methylparaben Free (MPF). Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride monohydrate and has the molecular weight of 288.8 g/mol. Lidocaine hydrochloride molecular formula is C14H22N2O  HClH2O, and has the following structural formula:. Lidocaine hydrochloride injection, USP in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. Lidocaine hydrochloride injection, USP - MPF is a sterile, nonpyrogenic, isotonic, clear, colorless, and preservative-free solution. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-20</NDCCode>
    <PackageDescription>25 VIAL in 1 TRAY (63323-010-20)  / 20 mL in 1 VIAL (63323-010-03) </PackageDescription>
    <NDC11Code>63323-0010-20</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-95</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-95)  / 20 mL in 1 VIAL, MULTI-DOSE (63323-010-42) </PackageDescription>
    <NDC11Code>63323-0010-95</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2023-12-20</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns). Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing. The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the BOXED WARNINGS. If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing. If anaerobic organisms are suspected as etiologic agents. consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin. Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa. It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections. While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use. It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s. Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-010-96</NDCCode>
    <PackageDescription>25 VIAL, MULTI-DOSE in 1 TRAY (63323-010-96)  / 20 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
    <NDC11Code>63323-0010-96</NDC11Code>
    <ProductNDC>63323-010</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Gentamicin</ProprietaryName>
    <NonProprietaryName>Gentamicin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000810</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA062366</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>GENTAMICIN SULFATE</SubstanceName>
    <StrengthNumber>40</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000810</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>To reduce the development of drug-resistant bacteria and maintain the effectiveness of Gentamicin Injection, USP and other antibacterial drugs, Gentamicin Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria.  When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy.  In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy. Gentamicin Injection, USP is indicated in the treatment of serious infections caused by susceptible strains of the following microorganisms: Pseudomonas aeruginosa, Proteus species (indole-positive and indole-negative), Escherichia coli, Klebsiella-Enterobacter-Serratia species, Citrobacter species and Staphylococcus species (coagulase-positive and coagulase-negative). Clinical studies have shown gentamicin injection to be effective in bacterial neonatal sepsis; bacterial septicemia and serious bacterial infections of the central nervous system (meningitis), urinary tract, respiratory tract, gastrointestinal tract (including peritonitis), skin, bone and soft tissue (including burns).  Aminoglycosides, including gentamicin, are not indicated in uncomplicated initial episodes of urinary tract infections unless the causative organisms are susceptible to these antibiotics and are not susceptible to antibiotics having less potential for toxicity. Specimens for bacterial culture should be obtained to isolate and identify causative organisms and to determine their susceptibility to gentamicin. Gentamicin injection may be considered as initial therapy in suspected or confirmed gram-negative infections, and therapy may be instituted before obtaining results of susceptibility testing.  The decision to continue therapy with this drug should be based on the results of susceptibility tests, the severity of the infection and the important additional concepts contained in the boxed WARNINGS.   If the causative organisms are resistant to gentamicin, other appropriate therapy should be instituted. In serious infections when the causative organisms are unknown, gentamicin injection may be administered as initial therapy in conjunction with a penicillin-type or cephalosporin-type drug before obtaining results of susceptibility testing.  If anaerobic organisms are suspected as etiologic agents, consideration should be given to using other suitable antimicrobial therapy in conjunction with gentamicin.  Following identification of the organism and its susceptibility, appropriate antibiotic therapy should then be continued. Gentamicin injection has been used effectively in combination with carbenicillin for the treatment of life-threatening infections caused by Pseudomonas aeruginosa.  It has also been found effective when used in conjunction with a penicillin-type drug for treatment of endocarditis caused by group D streptococci. Gentamicin injection has also been shown to be effective in the treatment of serious staphylococcal infections.  While not the antibiotic of first choice, gentamicin injection may be considered when penicillins or other less potentially toxic drugs are contraindicated and bacterial susceptibility tests and clinical judgment indicate its use.  It may also be considered in mixed infections caused by susceptible strains of staphylococci and gram-negative organisms. In the neonate with suspected bacterial sepsis or staphylococcal pneumonia, a penicillin-type drug is also usually indicated as concomitant therapy with gentamicin.</IndicationAndUsage>
    <Description>Gentamicin sulfate, a water-soluble antibiotic of the aminoglycoside group, is derived by the growth of Micromonospora purpurea, an actinomycete. It has the following structural formula. Gentamicin injection is a sterile, nonpyrogenic aqueous solution for parenteral administration. Each mL contains: Gentamicin sulfate equivalent to 40 mg gentamicin, methylparaben 1.8 mg and propylparaben 0.2 mg as preservatives, sodium metabisulfite 3.2 mg and edetate disodium 0.1 mg, Water for Injection q.s.  Sodium hydroxide and/or sulfuric acid may have been added for pH adjustment.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-032-00</NDCCode>
    <PackageDescription>20 VIAL, PHARMACY BULK PACKAGE in 1 TRAY (63323-032-00)  / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (63323-032-04) </PackageDescription>
    <NDC11Code>63323-0032-00</NDC11Code>
    <ProductNDC>63323-032</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Acetate</ProprietaryName>
    <NonProprietaryName>Sodium Acetate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20171030</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA206687</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM ACETATE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>meq/100mL</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2024-10-16</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20171030</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Sodium Acetate Injection, USP (4 mEq per mL) is indicated as a source of sodium for addition to large volume intravenous fluids to prevent or correct hyponatremia in patients with restricted or no oral intake. It is also useful as an additive for preparing specific intravenous fluid formulas when the needs of the patient cannot be met by standard electrolyte or nutrient solutions.</IndicationAndUsage>
    <Description>Sodium Acetate Injection, USP (4 mEq per mL) is a sterile, nonpyrogenic, concentrated solution of sodium acetate in water for injection. The solution is administered after dilution by the intravenous route as an electrolyte replenisher. It must not be administered undiluted. Each mL contains: 328 mg sodium acetate (anhydrous) which provides 4 mEq each of sodium (Na +) and acetate (CH 3COO -). The solution contains no bacteriostat, antimicrobial agent or added buffer. The pH may have been adjusted with glacial acetic acid to 6.5 (6.0 to 7.0). The osmolar concentration is 8 mOsmol/mL (calc); specific gravity 1.1511. The solution is intended as an alternative to sodium chloride to provide sodium ion (Na +) for addition to large volume infusion fluids for intravenous use. Sodium acetate, USP anhydrous is chemically designated as CH 3COONa, a hygroscopic powder very soluble in water. A Pharmacy Bulk Package is a container of a sterile preparation for parenteral use that contains many single doses. The contents are intended for use in a pharmacy admixture program and are restricted to the preparation of admixtures for intravenous infusion.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-064-20</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0064-20</NDC11Code>
    <ProductNDC>63323-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-064-29</NDCCode>
    <PackageDescription>25 VIAL, SINGLE-DOSE in 1 TRAY (63323-064-29)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0064-29</NDC11Code>
    <ProductNDC>63323-064</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Magnesium Sulfate</ProprietaryName>
    <NonProprietaryName>Magnesium Sulfate Heptahydrate</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
    <StartMarketingDate>20000808</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>MAGNESIUM SULFATE HEPTAHYDRATE</SubstanceName>
    <StrengthNumber>500</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Calculi Dissolution Agent [EPC],Magnesium Ion Exchange Activity [MoA],Osmotic Laxative [EPC],Osmotic Activity [MoA],Inhibition Small Intestine Fluid/Electrolyte Absorption [PE],Increased Large Intestinal Motility [PE],Stimulation Large Intestine Fluid/Electrolyte Secretion [PE],Inhibition Large Intestine Fluid/Electrolyte Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2018-12-28</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-090-20</NDCCode>
    <PackageDescription>25 VIAL, PLASTIC in 1 TRAY (63323-090-20)  &gt; 20 mL in 1 VIAL, PLASTIC (63323-090-02) </PackageDescription>
    <NDC11Code>63323-0090-20</NDC11Code>
    <ProductNDC>63323-090</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20210428</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212070</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>2.5</StrengthNumber>
    <StrengthUnit>meq/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2021-05-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20210428</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>14.6% Sodium Chloride Injection, USP Additive Solution is indicated for parenteral restoration of sodium ion in patients with restricted oral intake. Sodium replacement is specifically indicated in patients with hyponatremia or low salt syndrome. 14.6% Sodium Chloride Additive Solution may also be added to compatible carbohydrate solutions such as dextrose in water to provide electrolytes.</IndicationAndUsage>
    <Description>14.6% Sodium Chloride Injection, USP Additive Solution is a sterile, nonpyrogenic, concentrated solution for intravenous administration ONLY AFTER DILUTION to replenish electrolytes. The preparations contain either 2.92 or 5.84 g of sodium chloride (50 or 100 mEq each of Na+ and Cl-) in Water for Injection, USP. The solution contains no bacteriostat, antimicrobial agent or added buffer; pH 4.8 (4.5 to 7.0). May contain hydrochloric acid for pH adjustment. The osmolar concentration is 5 mOsmol/mL (calc.); specific gravity is 1.10. Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The semi-rigid material used for the plastic vials is fabricated from a specially formulated polyolefin. It is a copolymer of propylene. The safety of the plastic has been confirmed by tests in animals according to USP biological standards for plastic containers. The container requires no vapor barrier to maintain the proper drug concentration.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-095-61</NDCCode>
    <PackageDescription>20 VIAL, PLASTIC in 1 TRAY (63323-095-61)  &gt; 100 mL in 1 VIAL, PLASTIC (63323-095-02) </PackageDescription>
    <NDC11Code>63323-0095-61</NDC11Code>
    <ProductNDC>63323-095</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Sodium Chloride</ProprietaryName>
    <NonProprietaryName>Sodium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION, CONCENTRATE</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20220214</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA212070</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE</SubstanceName>
    <StrengthNumber>4</StrengthNumber>
    <StrengthUnit>meq/mL</StrengthUnit>
    <Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-02-19</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20220214</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>23.4% Sodium Chloride Injection, USP is indicated for use as an electrolyte replenisher in parenteral fluid therapy. It serves as an additive for total parenteral nutrition (TPN) and as an additive for carbohydrate containing I.V. fluids.</IndicationAndUsage>
    <Description>23.4% Sodium Chloride Injection, USP Additive Solution is a sterile, nonpyrogenic, concentrated solution for intravenous administration ONLY AFTER DILUTION to replenish electrolytes. The preparations contain 23.4 g of sodium chloride (400 mEq each of Na+ and Cl-) in Water for Injection, USP. The solution contains no bacteriostat, antimicrobial agent or added buffer. The additive may contain sodium hydroxide and/or hydrochloric acid for pH adjustment. The pH is 5.0 (4.5 to 7.0). The specific gravity is 1.15, and the osmolarity is 8008 mOsmol/L (calc). Sodium Chloride, USP is chemically designated NaCl, a white crystalline compound freely soluble in water. The molecular weight is 58.44 g/mol. The Pharmacy Bulk Package is a sterile dosage form which contains multiple single doses for preparation of admixtures for intravenous infusion (see DOSAGE AND ADMINISTRATION).</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-117-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-20)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-01) </PackageDescription>
    <NDC11Code>63323-0117-20</NDC11Code>
    <ProductNDC>63323-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170102</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040279</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-04-10</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170102</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.</IndicationAndUsage>
    <Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2               M.W. 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-117-28</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-117-28)  / 20 mL in 1 VIAL, SINGLE-DOSE (63323-117-41) </PackageDescription>
    <NDC11Code>63323-0117-28</NDC11Code>
    <ProductNDC>63323-117</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Fluorouracil</ProprietaryName>
    <NonProprietaryName>Fluorouracil</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20000712</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA040279</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>FLUOROURACIL</SubstanceName>
    <StrengthNumber>50</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2025-08-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20000712</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Fluorouracil is indicated for the treatment of patients with.  Adenocarcinoma of the Colon and Rectum.  Adenocarcinoma of the Breast.  Gastric Adenocarcinoma.  Pancreatic Adenocarcinoma.</IndicationAndUsage>
    <Description>Fluorouracil injection, USP, a nucleoside metabolic inhibitor, is a colorless to yellow aqueous, sterile, nonpyrogenic injectable solution for intravenous administration. Each mL contains 50 mg fluorouracil in water for injection, USP. The pH is adjusted to approximately 9.2 with sodium hydroxide. Chemically, fluorouracil, a fluorinated pyrimidine, is 5-fluoro-2,4 (1H,3H)-pyrimidinedione. Its structural formula is. C4H3FN2O2                 M.W. 130.08.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-120-20</NDCCode>
    <PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63323-120-20)  / 20 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
    <NDC11Code>63323-0120-20</NDC11Code>
    <ProductNDC>63323-120</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Cytarabine</ProprietaryName>
    <NonProprietaryName>Cytarabine</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRATHECAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20041129</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA076512</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CYTARABINE</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Nucleic Acid Synthesis Inhibitors [MoA], Nucleoside Metabolic Inhibitor [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2026-10-02</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20041129</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Cytarabine Injection in combination with other approved anti-cancer drugs is indicated for remission induction in acute non-lymphocytic leukemia of adults and pediatric patients. It has also been found useful in the treatment of acute lymphocytic leukemia and the blast phase of chronic myelocytic leukemia. Intrathecal administration of Cytarabine Injection (preservative free preparations only) is indicated in the prophylaxis and treatment of meningeal leukemia.</IndicationAndUsage>
    <Description>Cytarabine Injection, an antineoplastic, is a sterile solution of cytarabine for intravenous, intrathecal or subcutaneous administration. Each mL contains 100 mg cytarabine USP, in 2 g/20 mL (100 mg/mL) single dose vial and the following inactive ingredients: water for injection q.s. When necessary the pH is adjusted with hydrochloric acid and/or sodium hydroxide to a pH of 7.7. Cytarabine is chemically 1-β-D-Arabinofuranosylcytosine. The structural formula is. C 9H 13N 3O 5 M.W. 243.22                                       M.W. 243.22. Cytarabine is an odorless, white to off-white crystalline powder which is freely soluble in water and slightly soluble in alcohol and in chloroform.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-128-20</NDCCode>
    <PackageDescription>10 VIAL, SINGLE-DOSE in 1 TRAY (63323-128-20)  &gt; 20 mL in 1 VIAL, SINGLE-DOSE (63323-128-00) </PackageDescription>
    <NDC11Code>63323-0128-20</NDC11Code>
    <ProductNDC>63323-128</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Dacarbazine</ProprietaryName>
    <NonProprietaryName>Dacarbazine</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20010907</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA075371</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>DACARBAZINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/mL</StrengthUnit>
    <Pharm_Classes>Alkylating Activity [MoA], Alkylating Drug [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2022-11-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20010907</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Dacarbazine for Injection is indicated in the treatment of metastatic malignant melanoma.  In addition, Dacarbazine for Injection is also indicated for Hodgkin’s disease as a second-line therapy when used in combination with other effective agents.</IndicationAndUsage>
    <Description>Dacarbazine for Injection, USP is a white to pale yellow colored solid which is light sensitive.  Each vial contains 100 mg of dacarbazine, or 200 mg of dacarbazine (the active ingredient), citric acid and mannitol.  Dacarbazine for Injection, USP is reconstituted and administered intravenously (pH 3-4).  Dacarbazine for Injection, USP is an anticancer agent.  Chemically, dacarbazine is 5-(3,3-Dimethyl-1-triazeno) imidazole-4-carboxamide with the following structural formula. M.W. 182.19                                            C 6H 10N 6O.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-137-20</NDCCode>
    <PackageDescription>1 VIAL in 1 CARTON (63323-137-20)  / 1 INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION in 1 VIAL</PackageDescription>
    <NDC11Code>63323-0137-20</NDC11Code>
    <ProductNDC>63323-137</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Bleomycin</ProprietaryName>
    <NonProprietaryName>Bleomycin Sulfate</NonProprietaryName>
    <DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
    <RouteName>INTRAMUSCULAR; INTRAPLEURAL; INTRAVENOUS; SUBCUTANEOUS</RouteName>
    <StartMarketingDate>20090213</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA065185</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>BLEOMYCIN SULFATE</SubstanceName>
    <StrengthNumber>30</StrengthNumber>
    <StrengthUnit>[USP'U]/1</StrengthUnit>
    <Pharm_Classes>Cytoprotective Agent [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-10-15</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20090213</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Bleomycin for Injection, USP should be considered a palliative treatment.  It has been shown to be useful in the management of the following neoplasms either as a single agent or in proven combinations with other approved chemotherapeutic agents:. Squamous Cell Carcinoma: Head and neck (including mouth, tongue, tonsil, nasopharynx, oropharynx, sinus, palate, lip, buccal mucosa, gingivae, epiglottis, skin, larynx), penis, cervix, and vulva.  The response to Bleomycin for Injection is poorer in patients with previously irradiated head and neck cancer. Lymphomas: Hodgkin’s disease, non-Hodgkin’s lymphoma. Testicular Carcinoma: Embryonal cell, choriocarcinoma, and teratocarcinoma. Bleomycin for Injection, USP has also been shown to be useful in the management of. Malignant Pleural Effusion: Bleomycin for Injection is effective as a sclerosing agent for the treatment of malignant pleural effusion and prevention of recurrent pleural effusions.</IndicationAndUsage>
    <Description>Bleomycin for Injection, USP is a mixture of cytotoxic glycopeptide antibiotics isolated from a strain of Streptomyces verticillus.  It is freely soluble in water. Bleomycin for Injection, USP is provided as a sterile lyophilized powder for reconstitution containing 15 units per vial and 30 units per vial, which are intended for intramuscular, intravenous, subcutaneous or intrapleural administration. Its chemical name is N’-[3-(dimethylsulphonio)propyl]bleomycin-amide (bleomycin A 2) and N’-[4-(guaniodobutyl)]bleomycin-amide (bleomycin B 2). (Main component:  Bleomycin A 2, in which R is [CH 3] 2S +CH 2CH 2CH 2-). Note: A unit of bleomycin is equal to the formerly used milligram activity.  The term milligram activity is a misnomer and was changed to units to be more precise.</Description>
  </NDC>
  <NDC>
    <NDCCode>63323-143-97</NDCCode>
    <PackageDescription>20 AMPULE in 1 CARTON (63323-143-97)  &gt; 10 mL in 1 AMPULE</PackageDescription>
    <NDC11Code>63323-0143-97</NDC11Code>
    <ProductNDC>63323-143</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Addamel N</ProprietaryName>
    <NonProprietaryName>Chromium, Copper, Iron, Manganese, Iodine, Fluorine, Molybdenum, Selenium, And Zinc</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20130507</StartMarketingDate>
    <MarketingCategoryName>UNAPPROVED DRUG FOR USE IN DRUG SHORTAGE</MarketingCategoryName>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>CHROMIC CHLORIDE; CUPROUS CHLORIDE; FERRIC CHLORIDE; MANGANESE CHLORIDE; POTASSIUM IODIDE; SODIUM FLUORIDE; SODIUM MOLYBDATE DIHYDRATE; SODIUM SELENITE; ZINC CHLORIDE</SubstanceName>
    <StrengthNumber>1; .13; .11; .027; .013; .095; 1.9; 3.2; .65</StrengthNumber>
    <StrengthUnit>ug/mL; mg/mL; mg/mL; mg/mL; mg/mL; mg/mL; ug/mL; ug/mL; mg/mL</StrengthUnit>
    <Pharm_Classes>Iron [CS],Parenteral Iron Replacement [EPC],Phosphate Binder [EPC],Phosphate Chelating Activity [MoA],Magnetic Resonance Contrast Activity [MoA],Paramagnetic Contrast Agent [EPC],Copper Absorption Inhibitor [EPC],Decreased Copper Ion Absorption [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-02-01</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63323-164-75</NDCCode>
    <PackageDescription>20 BAG in 1 CASE (63323-164-75)  / 500 mL in 1 BAG (63323-164-25) </PackageDescription>
    <NDC11Code>63323-0164-75</NDC11Code>
    <ProductNDC>63323-164</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Lactated Ringers</ProprietaryName>
    <NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20190128</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA209338</ApplicationNumber>
    <LabelerName>Fresenius Kabi USA, LLC</LabelerName>
    <SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
    <StrengthNumber>600; 310; 30; 20</StrengthNumber>
    <StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
    <Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2024-04-30</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20190128</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Lactated Ringer's Injection is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
    <Description>Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
  </NDC>
</NDCList>