{
"NDC": [
{
"NDCCode": "63323-824-76",
"PackageDescription": "10 BAG in 1 CASE (63323-824-76) / 1000 mL in 1 BAG (63323-824-26) ",
"NDC11Code": "63323-0824-76",
"ProductNDC": "63323-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209448",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment."
},
{
"NDCCode": "63323-824-74",
"PackageDescription": "30 BAG in 1 CASE (63323-824-74) / 250 mL in 1 BAG (63323-824-24) ",
"NDC11Code": "63323-0824-74",
"ProductNDC": "63323-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209448",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment."
},
{
"NDCCode": "63323-824-75",
"PackageDescription": "20 BAG in 1 CASE (63323-824-75) / 500 mL in 1 BAG (63323-824-25) ",
"NDC11Code": "63323-0824-75",
"ProductNDC": "63323-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dextrose",
"NonProprietaryName": "Dextrose Monohydrate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209448",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "DEXTROSE MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Status": "Active",
"LastUpdate": "2026-03-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190329",
"SamplePackage": "N",
"IndicationAndUsage": "Dextrose Injection is indicated as source of water and calories.",
"Description": "10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment."
},
{
"NDCCode": "63323-164-76",
"PackageDescription": "10 BAG in 1 CASE (63323-164-76) / 1000 mL in 1 BAG (63323-164-26) ",
"NDC11Code": "63323-0164-76",
"ProductNDC": "63323-164",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lactated Ringers",
"NonProprietaryName": "Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20190128",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209338",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE",
"StrengthNumber": "600; 310; 30; 20",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL",
"Pharm_Classes": "Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190128",
"SamplePackage": "N",
"IndicationAndUsage": "Lactated Ringer's Injection is indicated as a source of water and electrolytes or as an alkalinizing agent.",
"Description": "Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "63323-178-76",
"PackageDescription": "10 BAG in 1 CASE (63323-178-76) > 1000 mL in 1 BAG",
"NDC11Code": "63323-0178-76",
"ProductNDC": "63323-178",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sterile Water",
"NonProprietaryName": "Water",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209689",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "WATER",
"StrengthNumber": "1000",
"StrengthUnit": "mL/1000mL",
"Status": "Active",
"LastUpdate": "2022-11-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171124",
"SamplePackage": "N",
"IndicationAndUsage": "Sterile Water for Injection is indicated for use only as a solvent or diluent vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced. For intravenous administration, an osmolar concentration not less than two-fifths (0.4) of the normal osmolarity of the extracellular fluid (280 mOsmol/liter) is essential to avoid intravascular hemolysis.",
"Description": "Sterile Water for Injection, USP is a sterile, nonpyrogenic, solute-free preparation of distilled water for injection. It is for use only as a sterile solvent or diluent vehicle for drugs or solutions suitable for parenteral administration. The pH is 5.5 (5.0 to 7.0). Sterile Water for Injection contains no bacteriostat, antimicrobial agent or added buffer and is intended only for single dose injection after admixture with an appropriate solute or solution. When smaller amounts are required, the unused portion should be discarded. Sterile Water for Injection is a pharmaceutic aid (vehicle) and parenteral fluid replenisher after addition of an appropriate solute. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "63323-623-76",
"PackageDescription": "1000 mL in 1 BAG (63323-623-76) ",
"NDC11Code": "63323-0623-76",
"ProductNDC": "63323-623",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20170919",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207310",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "9",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-04-26",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170919",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "63323-398-12",
"PackageDescription": "10 VIAL in 1 TRAY (63323-398-12) / 5 mL in 1 VIAL",
"NDC11Code": "63323-0398-12",
"ProductNDC": "63323-398",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin Monohydrate",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20060320",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065179",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "AZITHROMYCIN MONOHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2026-05-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060320",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below. As recommended dosages, durations of therapy, and applicable patient populations vary among these infections, please see DOSAGE AND ADMINISTRATION for dosing recommendations. Community-acquired pneumonia due to Chlamydia pneumoniae, Haemophilus influenzae, Legionella pneumophila, Moraxella catarrhalis, Mycoplasma pneumoniae, Staphylococcus aureus, or Streptococcus pneumoniae in patients who require initial intravenous therapy. Pelvic inflammatory disease due to Chlamydia trachomatis, Neisseria gonorrhoeae, or Mycoplasma hominis in patients who require initial intravenous therapy. If anaerobic microorganisms are suspected of contributing to the infection, an antimicrobial agent with anaerobic activity should be administered in combination with Azithromycin for Injection, USP. Azithromycin for Injection, USP should be followed by azithromycin by the oral route as required (see DOSAGE AND ADMINISTRATION). Appropriate culture and susceptibility tests should be performed before treatment to determine the causative microorganism and its susceptibility to azithromycin. Therapy with azithromycin may be initiated before results of these tests are known; once the results become available, antimicrobial therapy should be adjusted accordingly. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Azithromycin for Injection, USP and other antibacterial drugs, Azithromycin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibiotics, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L- ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O and a molecular weight of 767.00. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin. After reconstitution each mL contains: azithromycin monohydrate equivalent to 100 mg of azithromycin, 76.9 mg of citric acid, and sodium hydroxide for pH adjustment."
},
{
"NDCCode": "63323-815-02",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (63323-815-02) / 2 mL in 1 VIAL, SINGLE-DOSE (63323-815-21) ",
"NDC11Code": "63323-0815-02",
"ProductNDC": "63323-815",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amikacin Sulfate",
"NonProprietaryName": "Amikacin Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20151209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205604",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "AMIKACIN SULFATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2023-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151209",
"SamplePackage": "N",
"IndicationAndUsage": "Amikacin sulfate injection, USP is indicated in the short-term treatment of serious infections due to susceptible strains of Gram-negative bacteria, including Pseudomonas species, Escherichia coli, species of indole-positive and indole-negative Proteus, Providencia species, Klebsiella species, Enterobacter species, Serratia species, and Acinetobacter species. To reduce the development of drug-resistant bacteria and maintain the effectiveness of amikacin and other antibacterial drugs, amikacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Amikacin sulfate injection, USP is a semi-synthetic aminoglycoside antibiotic derived from kanamycin. It is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[6-amino-6-deoxy-α-D-glucopyranosyl-(1→6)]- N3-(4-amino-L-2-hydroxybutyryl)-2-deoxy-L-streptamine sulfate (1:2). C22H43N5O13 2H2SO4 M.W. 781.76. The dosage form is supplied as a sterile, colorless to light straw colored solution for IM or IV use. The 500 mg per 2 mL vial and 1 gram per 4 mL vial contains per each mL: 250 mg amikacin (as the sulfate), 0.66% sodium metabisulfite, 2.5% sodium citrate dihydrate, water for injection qs, with pH adjusted to 4.5 with sulfuric acid."
},
{
"NDCCode": "63323-815-04",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (63323-815-04) / 4 mL in 1 VIAL, SINGLE-DOSE (63323-815-22) ",
"NDC11Code": "63323-0815-04",
"ProductNDC": "63323-815",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amikacin Sulfate",
"NonProprietaryName": "Amikacin Sulfate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20151209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205604",
"LabelerName": "Fresenius Kabi USA, LLC",
"SubstanceName": "AMIKACIN SULFATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]",
"Status": "Active",
"LastUpdate": "2023-07-08",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20151209",
"SamplePackage": "N",
"IndicationAndUsage": "Amikacin sulfate injection, USP is indicated in the short-term treatment of serious infections due to susceptible strains of Gram-negative bacteria, including Pseudomonas species, Escherichia coli, species of indole-positive and indole-negative Proteus, Providencia species, Klebsiella species, Enterobacter species, Serratia species, and Acinetobacter species. To reduce the development of drug-resistant bacteria and maintain the effectiveness of amikacin and other antibacterial drugs, amikacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Amikacin sulfate injection, USP is a semi-synthetic aminoglycoside antibiotic derived from kanamycin. It is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[6-amino-6-deoxy-α-D-glucopyranosyl-(1→6)]- N3-(4-amino-L-2-hydroxybutyryl)-2-deoxy-L-streptamine sulfate (1:2). C22H43N5O13 2H2SO4 M.W. 781.76. The dosage form is supplied as a sterile, colorless to light straw colored solution for IM or IV use. The 500 mg per 2 mL vial and 1 gram per 4 mL vial contains per each mL: 250 mg amikacin (as the sulfate), 0.66% sodium metabisulfite, 2.5% sodium citrate dihydrate, water for injection qs, with pH adjusted to 4.5 with sulfuric acid."
},
{
"NDCCode": "0338-0180-06",
"PackageDescription": "6 BAG in 1 CARTON (0338-0180-06) / 1000 mL in 1 BAG (0338-0180-01) ",
"NDC11Code": "00338-0180-06",
"ProductNDC": "0338-0180",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 14",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0184-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0184-04) / 2000 mL in 1 BAG (0338-0184-01) ",
"NDC11Code": "00338-0184-04",
"ProductNDC": "0338-0184",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 14",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0194-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0194-04) / 2000 mL in 1 BAG (0338-0194-01) ",
"NDC11Code": "00338-0194-04",
"ProductNDC": "0338-0194",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "19970929",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020734",
"LabelerName": "Baxter Healthcare Corporation",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS]",
"Status": "Active",
"LastUpdate": "2026-06-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0202-06",
"PackageDescription": "6 BAG in 1 CARTON (0338-0202-06) / 1000 mL in 1 BAG (0338-0202-01) ",
"NDC11Code": "00338-0202-06",
"ProductNDC": "0338-0202",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 14",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0206-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0206-04) / 2000 mL in 1 BAG (0338-0206-01) ",
"NDC11Code": "00338-0206-04",
"ProductNDC": "0338-0206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 14",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0210-06",
"PackageDescription": "6 BAG in 1 CARTON (0338-0210-06) / 1000 mL in 1 BAG (0338-0210-01) ",
"NDC11Code": "00338-0210-06",
"ProductNDC": "0338-0210",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "0338-0214-04",
"PackageDescription": "4 BAG in 1 CARTON (0338-0214-04) / 2000 mL in 1 BAG (0338-0214-01) ",
"NDC11Code": "00338-0214-04",
"ProductNDC": "0338-0214",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clinimix E",
"NonProprietaryName": "Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose",
"DosageFormName": "INJECTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20200921",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020678",
"LabelerName": "Baxter Healthcare Company",
"SubstanceName": "LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE",
"StrengthNumber": "584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10",
"StrengthUnit": "mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL",
"Pharm_Classes": "Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]",
"Status": "Active",
"LastUpdate": "2026-06-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20200921",
"SamplePackage": "N",
"IndicationAndUsage": "CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.",
"Description": "CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum."
},
{
"NDCCode": "10135-824-05",
"PackageDescription": "500 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-05) ",
"NDC11Code": "10135-0824-05",
"ProductNDC": "10135-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-824-10",
"PackageDescription": "1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-10) ",
"NDC11Code": "10135-0824-10",
"ProductNDC": "10135-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "10135-824-90",
"PackageDescription": "90 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-90) ",
"NDC11Code": "10135-0824-90",
"ProductNDC": "10135-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metformin Hydrochloride",
"NonProprietaryName": "Metformin Hydrochloride",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20260901",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202306",
"LabelerName": "Marlex Pharmaceuticals, Inc.",
"SubstanceName": "METFORMIN HYDROCHLORIDE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Biguanide [EPC], Biguanides [CS]",
"Status": "Active",
"LastUpdate": "2026-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260901",
"SamplePackage": "N",
"IndicationAndUsage": "Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.",
"Description": "Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6."
},
{
"NDCCode": "11673-824-02",
"PackageDescription": "1 KIT in 1 BOTTLE (11673-824-02) * 355 mL in 1 BOTTLE * 355 mL in 1 BOTTLE",
"NDC11Code": "11673-0824-02",
"ProductNDC": "11673-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Daytime Severe And Nighttime Severe Cold And Flu",
"NonProprietaryName": "Daytime Severe - Acetaminophen, Dextromethorphan Hbr, Guaifenesin, Phenylephrine Hcl, Nighttime Severe-acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl",
"DosageFormName": "KIT",
"StartMarketingDate": "20240501",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M012",
"LabelerName": "TARGET CORPORATION",
"Status": "Active",
"LastUpdate": "2024-06-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240501",
"SamplePackage": "N"
},
{
"NDCCode": "11712-824-01",
"PackageDescription": "5 kg in 1 DRUM (11712-824-01) ",
"NDC11Code": "11712-0824-01",
"ProductNDC": "11712-824",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Rilpivirine Free Base",
"DosageFormName": "POWDER",
"StartMarketingDate": "20251010",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Delmar Chemicals Inc",
"SubstanceName": "RILPIVIRINE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-10-13",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "10-OCT-25"
},
{
"NDCCode": "13537-824-02",
"PackageDescription": "1 TUBE in 1 BOX (13537-824-02) > 4 g in 1 TUBE (13537-824-01)",
"NDC11Code": "13537-0824-02",
"ProductNDC": "13537-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Hydracolor 2 In 1 Highly Moisturizing And Coloring Spf 25",
"ProprietaryNameSuffix": "(nude Prisma) - Orange",
"NonProprietaryName": "Octinoxate And Oxybenzone",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20161109",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura Corporation LTD",
"SubstanceName": "OCTINOXATE; OXYBENZONE",
"StrengthNumber": ".0664; .0151",
"StrengthUnit": "g/g; g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "14537-824-10",
"PackageDescription": "6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG",
"NDC11Code": "14537-0824-10",
"ProductNDC": "14537-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Additive Formula 3",
"NonProprietaryName": "Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine",
"DosageFormName": "SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20020529",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "BN001214",
"LabelerName": "Terumo BCT, Ltd",
"SubstanceName": "ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE",
"StrengthNumber": ".03; .042; 1.1; .41; .28; .59",
"StrengthUnit": "g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL",
"Pharm_Classes": "Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]",
"Status": "Deprecated",
"LastUpdate": "2025-11-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20020529",
"SamplePackage": "N",
"IndicationAndUsage": "Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].",
"Description": "ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration."
},
{
"NDCCode": "14783-824-02",
"PackageDescription": "1 TUBE in 1 BOX (14783-824-02) > 2.2 g in 1 TUBE (14783-824-01)",
"NDC11Code": "14783-0824-02",
"ProductNDC": "14783-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Esika Pro Perfect Match Volumen",
"ProprietaryNameSuffix": "Spf 20 Plus Lip Liner For Maximum Fullness - (rosa Deseo) - Brown",
"NonProprietaryName": "Octinoxate",
"DosageFormName": "LIPSTICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20150828",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part352",
"LabelerName": "Ventura International LTD",
"SubstanceName": "OCTINOXATE",
"StrengthNumber": ".075",
"StrengthUnit": "g/g",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Helps prevent sunburn."
},
{
"NDCCode": "15579-824-07",
"PackageDescription": "1 BOTTLE in 1 CARTON (15579-824-07) > 30 CAPSULE, LIQUID FILLED in 1 BOTTLE",
"NDC11Code": "15579-0824-07",
"ProductNDC": "15579-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Jet-alert Maximum Strength Alertness Aid",
"NonProprietaryName": "Caffine",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20141126",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part340",
"LabelerName": "Bell Pharmaceuticals, Inc",
"SubstanceName": "CAFFEINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2016-01-15"
},
{
"NDCCode": "16571-824-01",
"PackageDescription": "100 TABLET, CHEWABLE in 1 BOTTLE (16571-824-01) ",
"NDC11Code": "16571-0824-01",
"ProductNDC": "16571-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Meclizine Hcl",
"NonProprietaryName": "Meclizine Hydrochloride Chewable",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20220818",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M009.50",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2024-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220818",
"SamplePackage": "N",
"IndicationAndUsage": "prevents and treats nausea, vomiting or dizziness due to motion sickness."
},
{
"NDCCode": "16571-824-10",
"PackageDescription": "1000 TABLET, CHEWABLE in 1 BOTTLE (16571-824-10) ",
"NDC11Code": "16571-0824-10",
"ProductNDC": "16571-824",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Meclizine Hcl",
"NonProprietaryName": "Meclizine Hydrochloride Chewable",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20220818",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M009.50",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "MECLIZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antiemetic [EPC], Emesis Suppression [PE]",
"Status": "Active",
"LastUpdate": "2024-11-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220818",
"SamplePackage": "N",
"IndicationAndUsage": "prevents and treats nausea, vomiting or dizziness due to motion sickness."
},
{
"NDCCode": "16590-824-30",
"PackageDescription": "30 TABLET in 1 BOTTLE, PLASTIC (16590-824-30)",
"NDC11Code": "16590-0824-30",
"ProductNDC": "16590-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079153",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "16590-824-45",
"PackageDescription": "45 TABLET in 1 BOTTLE, PLASTIC (16590-824-45)",
"NDC11Code": "16590-0824-45",
"ProductNDC": "16590-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079153",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3."
},
{
"NDCCode": "16590-824-60",
"PackageDescription": "60 TABLET in 1 BOTTLE, PLASTIC (16590-824-60)",
"NDC11Code": "16590-0824-60",
"ProductNDC": "16590-824",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Topiramate",
"NonProprietaryName": "Topiramate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20090327",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079153",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "TOPIRAMATE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .",
"Description": "Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63323-824-76</NDCCode>
<PackageDescription>10 BAG in 1 CASE (63323-824-76) / 1000 mL in 1 BAG (63323-824-26) </PackageDescription>
<NDC11Code>63323-0824-76</NDC11Code>
<ProductNDC>63323-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209448</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.</Description>
</NDC>
<NDC>
<NDCCode>63323-824-74</NDCCode>
<PackageDescription>30 BAG in 1 CASE (63323-824-74) / 250 mL in 1 BAG (63323-824-24) </PackageDescription>
<NDC11Code>63323-0824-74</NDC11Code>
<ProductNDC>63323-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209448</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.</Description>
</NDC>
<NDC>
<NDCCode>63323-824-75</NDCCode>
<PackageDescription>20 BAG in 1 CASE (63323-824-75) / 500 mL in 1 BAG (63323-824-25) </PackageDescription>
<NDC11Code>63323-0824-75</NDC11Code>
<ProductNDC>63323-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dextrose</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209448</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>DEXTROSE MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-03-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Dextrose Injection is indicated as source of water and calories.</IndicationAndUsage>
<Description>10% Dextrose Injection, USP is a sterile, non-pyrogenic solution for fluid replenishment and caloric supply in single dose containers for intravenous administration. The solution contains no bacteriostatic, antimicrobial agent or added buffer and is intended only for use as a single-dose injection. The pH range is 4.0 (3.2 to 6.5). Dextrose, USP is chemically designated D-glucose, monohydrate (C6H12O6 H2O), a hexose sugar freely soluble in water. The molecular weight of dextrose (D-glucose) monohydrate is 198.17. It has the following structural formula:. Water for Injection, USP is chemically designated H2O. Dextrose is derived from corn. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers. The flexible container is a closed system, and air is prefilled in the container to facilitate drainage. The container does not require entry of external air during administration. The container has two ports: one is the administration outlet port for attachment of an intravenous administration set and the other port has a medication site for addition of supplemental medication ([see Instructions for Use (2.3)]). The primary function of the overwrap is to protect the container from the physical environment.</Description>
</NDC>
<NDC>
<NDCCode>63323-164-76</NDCCode>
<PackageDescription>10 BAG in 1 CASE (63323-164-76) / 1000 mL in 1 BAG (63323-164-26) </PackageDescription>
<NDC11Code>63323-0164-76</NDC11Code>
<ProductNDC>63323-164</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lactated Ringers</ProprietaryName>
<NonProprietaryName>Sodium Chloride, Sodium Lactate, Potassium Chloride, Calcium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20190128</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209338</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE; SODIUM LACTATE; POTASSIUM CHLORIDE; CALCIUM CHLORIDE</SubstanceName>
<StrengthNumber>600; 310; 30; 20</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL</StrengthUnit>
<Pharm_Classes>Blood Coagulation Factor [EPC], Calcium [CS], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190128</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lactated Ringer's Injection is indicated as a source of water and electrolytes or as an alkalinizing agent.</IndicationAndUsage>
<Description>Lactated Ringer's Injection, USP is a sterile, nonpyrogenic solution for fluid and electrolyte replenishment in single dose containers for intravenous administration. It contains no antimicrobial agents. Composition, osmolarity, pH, ionic concentration and caloric content are shown in Table 1. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from inside the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>63323-178-76</NDCCode>
<PackageDescription>10 BAG in 1 CASE (63323-178-76) > 1000 mL in 1 BAG</PackageDescription>
<NDC11Code>63323-0178-76</NDC11Code>
<ProductNDC>63323-178</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sterile Water</ProprietaryName>
<NonProprietaryName>Water</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209689</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>WATER</SubstanceName>
<StrengthNumber>1000</StrengthNumber>
<StrengthUnit>mL/1000mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2022-11-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sterile Water for Injection is indicated for use only as a solvent or diluent vehicle for parenterally administered drugs or solutions and as a source of water for parenteral fluid replenishment after suitable additives are introduced. For intravenous administration, an osmolar concentration not less than two-fifths (0.4) of the normal osmolarity of the extracellular fluid (280 mOsmol/liter) is essential to avoid intravascular hemolysis.</IndicationAndUsage>
<Description>Sterile Water for Injection, USP is a sterile, nonpyrogenic, solute-free preparation of distilled water for injection. It is for use only as a sterile solvent or diluent vehicle for drugs or solutions suitable for parenteral administration. The pH is 5.5 (5.0 to 7.0). Sterile Water for Injection contains no bacteriostat, antimicrobial agent or added buffer and is intended only for single dose injection after admixture with an appropriate solute or solution. When smaller amounts are required, the unused portion should be discarded. Sterile Water for Injection is a pharmaceutic aid (vehicle) and parenteral fluid replenisher after addition of an appropriate solute. Water for Injection, USP is chemically designated H 2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers ( freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container’s chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>63323-623-76</NDCCode>
<PackageDescription>1000 mL in 1 BAG (63323-623-76) </PackageDescription>
<NDC11Code>63323-0623-76</NDC11Code>
<ProductNDC>63323-623</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20170919</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207310</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>9</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-04-26</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.9% Sodium Chloride Injection, USP solution is sterile and nonpyrogenic. It is a parenteral solution containing sodium chloride in water for injection intended for intravenous administration. For 0.9% Sodium Chloride Injection, USP, each 100 mL contains 900 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 154 mEq; chloride 154 mEq. The osmolarity is 308 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. The solution is a parenteral fluid and electrolyte replenisher. Sodium Chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for injection, USP is chemically designated H2O. The flexible container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>63323-398-12</NDCCode>
<PackageDescription>10 VIAL in 1 TRAY (63323-398-12) / 5 mL in 1 VIAL</PackageDescription>
<NDC11Code>63323-0398-12</NDC11Code>
<ProductNDC>63323-398</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin Monohydrate</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20060320</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065179</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>AZITHROMYCIN MONOHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060320</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin for Injection, USP is indicated for the treatment of patients with infections caused by susceptible strains of the designated microorganisms in the conditions listed below. As recommended dosages, durations of therapy, and applicable patient populations vary among these infections, please see DOSAGE AND ADMINISTRATION for dosing recommendations. Community-acquired pneumonia due to Chlamydia pneumoniae, Haemophilus influenzae, Legionella pneumophila, Moraxella catarrhalis, Mycoplasma pneumoniae, Staphylococcus aureus, or Streptococcus pneumoniae in patients who require initial intravenous therapy. Pelvic inflammatory disease due to Chlamydia trachomatis, Neisseria gonorrhoeae, or Mycoplasma hominis in patients who require initial intravenous therapy. If anaerobic microorganisms are suspected of contributing to the infection, an antimicrobial agent with anaerobic activity should be administered in combination with Azithromycin for Injection, USP. Azithromycin for Injection, USP should be followed by azithromycin by the oral route as required (see DOSAGE AND ADMINISTRATION). Appropriate culture and susceptibility tests should be performed before treatment to determine the causative microorganism and its susceptibility to azithromycin. Therapy with azithromycin may be initiated before results of these tests are known; once the results become available, antimicrobial therapy should be adjusted accordingly. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Azithromycin for Injection, USP and other antibacterial drugs, Azithromycin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Azithromycin for Injection, USP contains the active ingredient azithromycin, an azalide, a subclass of macrolide antibiotics, for intravenous injection. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3- C-methyl-3- O-methyl-α- L- ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β- D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Azithromycin has the following structural formula:. Azithromycin, as the monohydrate, is a white crystalline powder with a molecular formula of C 38H 72N 2O 12H 2O and a molecular weight of 767.00. Azithromycin for Injection, USP consists of azithromycin monohydrate and the following inactive ingredients: citric acid and sodium hydroxide. Azithromycin for Injection, USP is supplied in lyophilized form in a 10 mL vial equivalent to 500 mg of azithromycin for intravenous administration. Reconstitution, according to label directions, results in approximately 5 mL of azithromycin for intravenous injection with each mL containing azithromycin monohydrate equivalent to 100 mg of azithromycin. After reconstitution each mL contains: azithromycin monohydrate equivalent to 100 mg of azithromycin, 76.9 mg of citric acid, and sodium hydroxide for pH adjustment.</Description>
</NDC>
<NDC>
<NDCCode>63323-815-02</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (63323-815-02) / 2 mL in 1 VIAL, SINGLE-DOSE (63323-815-21) </PackageDescription>
<NDC11Code>63323-0815-02</NDC11Code>
<ProductNDC>63323-815</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amikacin Sulfate</ProprietaryName>
<NonProprietaryName>Amikacin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20151209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205604</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>AMIKACIN SULFATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amikacin sulfate injection, USP is indicated in the short-term treatment of serious infections due to susceptible strains of Gram-negative bacteria, including Pseudomonas species, Escherichia coli, species of indole-positive and indole-negative Proteus, Providencia species, Klebsiella species, Enterobacter species, Serratia species, and Acinetobacter species. To reduce the development of drug-resistant bacteria and maintain the effectiveness of amikacin and other antibacterial drugs, amikacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Amikacin sulfate injection, USP is a semi-synthetic aminoglycoside antibiotic derived from kanamycin. It is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[6-amino-6-deoxy-α-D-glucopyranosyl-(1→6)]- N3-(4-amino-L-2-hydroxybutyryl)-2-deoxy-L-streptamine sulfate (1:2). C22H43N5O13 2H2SO4 M.W. 781.76. The dosage form is supplied as a sterile, colorless to light straw colored solution for IM or IV use. The 500 mg per 2 mL vial and 1 gram per 4 mL vial contains per each mL: 250 mg amikacin (as the sulfate), 0.66% sodium metabisulfite, 2.5% sodium citrate dihydrate, water for injection qs, with pH adjusted to 4.5 with sulfuric acid.</Description>
</NDC>
<NDC>
<NDCCode>63323-815-04</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (63323-815-04) / 4 mL in 1 VIAL, SINGLE-DOSE (63323-815-22) </PackageDescription>
<NDC11Code>63323-0815-04</NDC11Code>
<ProductNDC>63323-815</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amikacin Sulfate</ProprietaryName>
<NonProprietaryName>Amikacin Sulfate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20151209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205604</ApplicationNumber>
<LabelerName>Fresenius Kabi USA, LLC</LabelerName>
<SubstanceName>AMIKACIN SULFATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Aminoglycoside Antibacterial [EPC], Aminoglycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2023-07-08</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20151209</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Amikacin sulfate injection, USP is indicated in the short-term treatment of serious infections due to susceptible strains of Gram-negative bacteria, including Pseudomonas species, Escherichia coli, species of indole-positive and indole-negative Proteus, Providencia species, Klebsiella species, Enterobacter species, Serratia species, and Acinetobacter species. To reduce the development of drug-resistant bacteria and maintain the effectiveness of amikacin and other antibacterial drugs, amikacin should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Amikacin sulfate injection, USP is a semi-synthetic aminoglycoside antibiotic derived from kanamycin. It is O-3-amino-3-deoxy-α-D-glucopyranosyl-(1→4)-O-[6-amino-6-deoxy-α-D-glucopyranosyl-(1→6)]- N3-(4-amino-L-2-hydroxybutyryl)-2-deoxy-L-streptamine sulfate (1:2). C22H43N5O13 2H2SO4 M.W. 781.76. The dosage form is supplied as a sterile, colorless to light straw colored solution for IM or IV use. The 500 mg per 2 mL vial and 1 gram per 4 mL vial contains per each mL: 250 mg amikacin (as the sulfate), 0.66% sodium metabisulfite, 2.5% sodium citrate dihydrate, water for injection qs, with pH adjusted to 4.5 with sulfuric acid.</Description>
</NDC>
<NDC>
<NDCCode>0338-0180-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0338-0180-06) / 1000 mL in 1 BAG (0338-0180-01) </PackageDescription>
<NDC11Code>00338-0180-06</NDC11Code>
<ProductNDC>0338-0180</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 14</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0184-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0184-04) / 2000 mL in 1 BAG (0338-0184-01) </PackageDescription>
<NDC11Code>00338-0184-04</NDC11Code>
<ProductNDC>0338-0184</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 14</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0194-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0194-04) / 2000 mL in 1 BAG (0338-0194-01) </PackageDescription>
<NDC11Code>00338-0194-04</NDC11Code>
<ProductNDC>0338-0194</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>19970929</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020734</ApplicationNumber>
<LabelerName>Baxter Healthcare Corporation</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX is indicated as a source of calories and protein for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX sulfite-free (amino acids in dextrose) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids. The formulas for the individual amino acids found in CLINIMIX sulfite-free (amino acids in dextrose) injections are provided in Table 8. The injection port chamber contains dextrose. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0202-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0338-0202-06) / 1000 mL in 1 BAG (0338-0202-01) </PackageDescription>
<NDC11Code>00338-0202-06</NDC11Code>
<ProductNDC>0338-0202</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 14</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0206-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0206-04) / 2000 mL in 1 BAG (0338-0206-01) </PackageDescription>
<NDC11Code>00338-0206-04</NDC11Code>
<ProductNDC>0338-0206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 14</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0210-06</NDCCode>
<PackageDescription>6 BAG in 1 CARTON (0338-0210-06) / 1000 mL in 1 BAG (0338-0210-01) </PackageDescription>
<NDC11Code>00338-0210-06</NDC11Code>
<ProductNDC>0338-0210</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>0338-0214-04</NDCCode>
<PackageDescription>4 BAG in 1 CARTON (0338-0214-04) / 2000 mL in 1 BAG (0338-0214-01) </PackageDescription>
<NDC11Code>00338-0214-04</NDC11Code>
<ProductNDC>0338-0214</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clinimix E</ProprietaryName>
<NonProprietaryName>Leucine, Phenylalanine, Lysine, Methionine, Isoleucine, Valine, Histidine, Threonine, Tryptophan, Alanine, Glycine, Arginine, Proline, Serine, Tyrosine, Dibasic Potassium Phosphate, Magnesium Chloride, Sodium Chloride, Calcium Chloride, Dextrose</NonProprietaryName>
<DosageFormName>INJECTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20200921</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020678</ApplicationNumber>
<LabelerName>Baxter Healthcare Company</LabelerName>
<SubstanceName>LEUCINE; PHENYLALANINE; LYSINE; METHIONINE; ISOLEUCINE; VALINE; HISTIDINE; THREONINE; TRYPTOPHAN; ALANINE; GLYCINE; ARGININE; PROLINE; SERINE; TYROSINE; POTASSIUM PHOSPHATE, DIBASIC; MAGNESIUM CHLORIDE; SODIUM CHLORIDE; CALCIUM CHLORIDE; DEXTROSE</SubstanceName>
<StrengthNumber>584; 448; 464; 320; 480; 464; 384; 336; 144; 1656; 824; 920; 544; 400; 32; 261; 51; 205; 33; 10</StrengthNumber>
<StrengthUnit>mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; mg/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Amino Acid [EPC], Amino Acids [CS], Blood Coagulation Factor [EPC], Calcium [CS], Calculi Dissolution Agent [EPC], Cations, Divalent [CS], Increased Coagulation Factor Activity [PE], Increased Large Intestinal Motility [PE], Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Inhibition Small Intestine Fluid/Electrolyte Absorption [PE], Magnesium Ion Exchange Activity [MoA], Osmotic Activity [MoA], Osmotic Activity [MoA], Osmotic Laxative [EPC], Osmotic Laxative [EPC], Phosphate Binder [EPC], Phosphate Chelating Activity [MoA], Stimulation Large Intestine Fluid/Electrolyte Secretion [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200921</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>CLINIMIX E is indicated as a source of calories, protein, and electrolytes for patients requiring parenteral nutrition when oral or enteral nutrition is not possible, insufficient, or contraindicated. CLINIMIX E may be used to treat negative nitrogen balance in patients.</IndicationAndUsage>
<Description>CLINIMIX E sulfite-free (amino acids with electrolytes in dextrose with calcium) injection for intravenous use consists of sterile, nonpyrogenic, hypertonic solutions in a dual chamber container. The outlet port chamber contains essential and nonessential amino acids with electrolytes. The formulas for the individual electrolytes and amino acids are provided in Table 8. The injection port chamber contains dextrose with calcium. The formula for Calcium Chloride is: CaCl22H2O. Dextrose, USP, is chemically designated D-glucose, monohydrate (C6H12O6 H2O) and has the following structure. Dextrose is derived from corn. See Table 7 for composition, pH, osmolarity, ionic concentration and caloric content of the admixed product [see Dosage Forms and Strengths (3)]. The dual chamber container is a lipid-compatible plastic container (PL 2401 Plastic). CLINIMIX E contains no more than 25 mcg/L of aluminum.</Description>
</NDC>
<NDC>
<NDCCode>10135-824-05</NDCCode>
<PackageDescription>500 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-05) </PackageDescription>
<NDC11Code>10135-0824-05</NDC11Code>
<ProductNDC>10135-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-824-10</NDCCode>
<PackageDescription>1000 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-10) </PackageDescription>
<NDC11Code>10135-0824-10</NDC11Code>
<ProductNDC>10135-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>10135-824-90</NDCCode>
<PackageDescription>90 TABLET, EXTENDED RELEASE in 1 BOTTLE (10135-824-90) </PackageDescription>
<NDC11Code>10135-0824-90</NDC11Code>
<ProductNDC>10135-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metformin Hydrochloride</ProprietaryName>
<NonProprietaryName>Metformin Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260901</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202306</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>METFORMIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Biguanide [EPC], Biguanides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260901</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metformin Hydrochloride Extended-Release Tablets, USP is indicated as an adjunct to diet and exercise to improve glycemic control in adults with type 2 diabetes mellitus.</IndicationAndUsage>
<Description>Metformin Hydrochloride Extended-Release Tablets contain the antihyperglycemic agent metformin, which is a biguanide, in the form of monohydrochloride. The chemical name of metformin hydrochloride is N,N-dimethylimidodicarbonimidic diamide hydrochloride. The structural formula is as shown below:. Metformin hydrochloride is a white to off-white crystalline compound with a molecular formula of C 4H 11N 5HCl and a molecular weight of 165.63. It is freely soluble in water and is practically insoluble in acetone, ether, and chloroform. The pK aof metformin is 12.4. The pH of a 1% aqueous solution of metformin hydrochloride is 6.68. Metformin hydrochloride extended-release tablets, USP contains 500 mg or 750 mg of metformin hydrochloride, which is equivalent to 389.93 mg, 584.90 mg metformin base, respectively. Metformin Hydrochloride Extended-Release Tablets USP, 500 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose and povidone. Metformin Hydrochloride Extended-Release Tablets USP, 750 mg contain the inactive ingredients colloidal silicon dioxide, hypromellose, magnesium stearate, microcrystalline cellulose, povidone, polyvinyl alcohol, polyethylene glycol, titanium dioxide, talc, red iron oxide and yellow iron oxide. System Components and Performance – Metformin Hydrochloride Extended-Release Tablets USP is based on a hydrophilic polymer matrix drug delivery system. On oral administration, fluid from the gastrointestinal tract wets and penetrates the matrix leading to the formation of a hydrogel and swelling of the polymer matrix. Drug is released slowly over time in a controlled manner, independent of pH, by a process of drug dissolution followed by drug diffusion through the hydrogel barrier formed and gradual matrix erosion. Metformin Hydrochloride Extended-Release Tablets USP meets USP Dissolution Test 6.</Description>
</NDC>
<NDC>
<NDCCode>11673-824-02</NDCCode>
<PackageDescription>1 KIT in 1 BOTTLE (11673-824-02) * 355 mL in 1 BOTTLE * 355 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>11673-0824-02</NDC11Code>
<ProductNDC>11673-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Daytime Severe And Nighttime Severe Cold And Flu</ProprietaryName>
<NonProprietaryName>Daytime Severe - Acetaminophen, Dextromethorphan Hbr, Guaifenesin, Phenylephrine Hcl, Nighttime Severe-acetaminophen, Dextromethorphan Hbr, Doxylamine Succinate, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20240501</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M012</ApplicationNumber>
<LabelerName>TARGET CORPORATION</LabelerName>
<Status>Active</Status>
<LastUpdate>2024-06-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240501</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>11712-824-01</NDCCode>
<PackageDescription>5 kg in 1 DRUM (11712-824-01) </PackageDescription>
<NDC11Code>11712-0824-01</NDC11Code>
<ProductNDC>11712-824</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Rilpivirine Free Base</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20251010</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Delmar Chemicals Inc</LabelerName>
<SubstanceName>RILPIVIRINE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-10-13</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>10-OCT-25</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>13537-824-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (13537-824-02) > 4 g in 1 TUBE (13537-824-01)</PackageDescription>
<NDC11Code>13537-0824-02</NDC11Code>
<ProductNDC>13537-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Hydracolor 2 In 1 Highly Moisturizing And Coloring Spf 25</ProprietaryName>
<ProprietaryNameSuffix>(nude Prisma) - Orange</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate And Oxybenzone</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20161109</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura Corporation LTD</LabelerName>
<SubstanceName>OCTINOXATE; OXYBENZONE</SubstanceName>
<StrengthNumber>.0664; .0151</StrengthNumber>
<StrengthUnit>g/g; g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>14537-824-10</NDCCode>
<PackageDescription>6 POUCH in 1 CARTON (14537-824-10) / 6 BAG in 1 POUCH / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>14537-0824-10</NDC11Code>
<ProductNDC>14537-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Additive Formula 3</ProprietaryName>
<NonProprietaryName>Dextrose Monohydrate, Trisodium Citrate Dihydrate, Sodium Chloride, Sodium Phosphate, Monobasic, Monohydrate, Citric Acid Monohydrate, And Adenine</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20020529</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>BN001214</ApplicationNumber>
<LabelerName>Terumo BCT, Ltd</LabelerName>
<SubstanceName>ADENINE; CITRIC ACID MONOHYDRATE; DEXTROSE MONOHYDRATE; SODIUM CHLORIDE; SODIUM PHOSPHATE, MONOBASIC, MONOHYDRATE; TRISODIUM CITRATE DIHYDRATE</SubstanceName>
<StrengthNumber>.03; .042; 1.1; .41; .28; .59</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL; g/100mL; g/100mL; g/100mL; g/100mL</StrengthUnit>
<Pharm_Classes>Acidifying Activity [MoA], Acidifying Activity [MoA], Anti-coagulant [EPC], Anti-coagulant [EPC], Calcium Chelating Activity [MoA], Calcium Chelating Activity [MoA], Calculi Dissolution Agent [EPC], Calculi Dissolution Agent [EPC], Decreased Coagulation Factor Activity [PE], Decreased Coagulation Factor Activity [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20020529</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Use only with Trima Accel red blood cell (RBC) apheresis collections. [See Dosage and Administration (2).].</IndicationAndUsage>
<Description>ADDITIVE SOLUTION FORMULA 3 (AS-3) is designed to be added to packed RBC collected in apheresis procedures, and acts to preserve and extend the shelf life of packed RBC products for later transfusion to patients. The solution is intended to be metered by an apheresis device during apheresis procedures or added manually after a collection. The solution is sterile and non-pyrogenic, and it contains no bacteriostatic or antimicrobial agents. The formulas of the active ingredients are provided in Table 1. Each 100 mL of ADDITIVE SOLUTION FORMULA 3 (AS-3) contains: Dextrose Monohydrate USP 1.10 g; Trisodium Citrate Dihydrate USP 0.59 g; Sodium Chloride USP 0.41 g; Monobasic Sodium Phosphate Monohydrate USP 0.28 g; Citric Acid Monohydrate USP 0.042 g; Adenine USP 0.03 g; and Water for Injection USP. ADDITIVE SOLUTION FORMULA 3 is available in three volumes: 100 mL, 200 mL and 350 mL. The 100 mL bags are individually wrapped with a clear plastic film. Six individually wrapped bags are then vacuum-sealed in a foil pouch, which serves as a vapor barrier to prevent water loss during storage. After you remove the individual solution bags from the foil pouch, you can either leave them in the clear plastic film or remove and discard it. Once the foil pouch has been opened, use all six of the solution bags within 2 weeks. The 200 mL and 350 mL bags are individually wrapped with a clear plastic film. These larger volumes do not require the additional vapor barrier. Once the clear plastic film has been removed, use the solution within 2 weeks. The Polyolefin bag is not made with natural rubber latex. The bag is made from a multilayered film. It contains materials that have been tested to demonstrate the suitability of the container for storing pharmaceutical solutions. The bag is nontoxic and biologically inert. The bag-solution unit is a closed system and is not dependent upon entry of external air during administration.</Description>
</NDC>
<NDC>
<NDCCode>14783-824-02</NDCCode>
<PackageDescription>1 TUBE in 1 BOX (14783-824-02) > 2.2 g in 1 TUBE (14783-824-01)</PackageDescription>
<NDC11Code>14783-0824-02</NDC11Code>
<ProductNDC>14783-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Esika Pro Perfect Match Volumen</ProprietaryName>
<ProprietaryNameSuffix>Spf 20 Plus Lip Liner For Maximum Fullness - (rosa Deseo) - Brown</ProprietaryNameSuffix>
<NonProprietaryName>Octinoxate</NonProprietaryName>
<DosageFormName>LIPSTICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20150828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>Ventura International LTD</LabelerName>
<SubstanceName>OCTINOXATE</SubstanceName>
<StrengthNumber>.075</StrengthNumber>
<StrengthUnit>g/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Helps prevent sunburn.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>15579-824-07</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (15579-824-07) > 30 CAPSULE, LIQUID FILLED in 1 BOTTLE</PackageDescription>
<NDC11Code>15579-0824-07</NDC11Code>
<ProductNDC>15579-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Jet-alert Maximum Strength Alertness Aid</ProprietaryName>
<NonProprietaryName>Caffine</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20141126</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part340</ApplicationNumber>
<LabelerName>Bell Pharmaceuticals, Inc</LabelerName>
<SubstanceName>CAFFEINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2016-01-15</LastUpdate>
</NDC>
<NDC>
<NDCCode>16571-824-01</NDCCode>
<PackageDescription>100 TABLET, CHEWABLE in 1 BOTTLE (16571-824-01) </PackageDescription>
<NDC11Code>16571-0824-01</NDC11Code>
<ProductNDC>16571-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hcl</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride Chewable</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220818</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M009.50</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>prevents and treats nausea, vomiting or dizziness due to motion sickness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16571-824-10</NDCCode>
<PackageDescription>1000 TABLET, CHEWABLE in 1 BOTTLE (16571-824-10) </PackageDescription>
<NDC11Code>16571-0824-10</NDC11Code>
<ProductNDC>16571-824</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Meclizine Hcl</ProprietaryName>
<NonProprietaryName>Meclizine Hydrochloride Chewable</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220818</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M009.50</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>MECLIZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antiemetic [EPC], Emesis Suppression [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-11-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220818</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>prevents and treats nausea, vomiting or dizziness due to motion sickness.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>16590-824-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE, PLASTIC (16590-824-30)</PackageDescription>
<NDC11Code>16590-0824-30</NDC11Code>
<ProductNDC>16590-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079153</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>16590-824-45</NDCCode>
<PackageDescription>45 TABLET in 1 BOTTLE, PLASTIC (16590-824-45)</PackageDescription>
<NDC11Code>16590-0824-45</NDC11Code>
<ProductNDC>16590-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079153</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
<NDC>
<NDCCode>16590-824-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE, PLASTIC (16590-824-60)</PackageDescription>
<NDC11Code>16590-0824-60</NDC11Code>
<ProductNDC>16590-824</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Topiramate</ProprietaryName>
<NonProprietaryName>Topiramate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090327</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079153</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>TOPIRAMATE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Central Nervous System Disorganized Electrical Activity [PE],Cytochrome P450 3A4 Inducers [MoA],Cytochrome P450 2C19 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Topiramate is an antiepileptic (AED) agent indicated for: : 1 Monotherapy epilepsy: Initial monotherapy in patients ≥2 years of age with partial onset or primary generalized tonic-clonic seizures (1.1). , 2 Adjunctive therapy epilepsy: Adjunctive therapy for adults and pediatric patients (2 to 16 years of age) with partial onset seizures or primary generalized tonic-clonic seizures, and in patients ≥2 years of age with seizures associated with Lennox-Gastaut syndrome (LGS) (1.2). .</IndicationAndUsage>
<Description>Topiramate is a sulfamate-substituted monosaccharide. Topiramate tablets, USP are available as 25 mg, 50 mg, 100 mg, and 200 mg round tablets for oral administration. Topiramate, USP is a white crystalline powder with a bitter taste. Topiramate is most soluble in alkaline solutions containing sodium hydroxide or sodium phosphate and having a pH of 9 to 10. It is freely soluble in acetone, chloroform, dimethylsulfoxide, and ethanol. The solubility in water is 9.8 mg/mL. Its saturated solution has a pH of 6.3. Topiramate has the molecular formula C12H21NO8S and a molecular weight of 339.36. Topiramate is designated chemically as 2,3:4,5-Di-O-isopropylidene-β-D-fructopyranose sulfamate and has the following structural formula:. Topiramate tablets, USP contain the following inactive ingredients: colloidal silicon dioxide, ferric oxide red (200 mg tablets), ferric oxide yellow (50, 100, and 200 mg tablets), hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, pregelatinized starch, sodium starch glycolate, talc and titanium dioxide. Meets USP Dissolution Test 3.</Description>
</NDC>
</NDCList>