{
"NDC": [
{
"NDCCode": "63539-436-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (63539-436-14) ",
"NDC11Code": "63539-0436-14",
"ProductNDC": "63539-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cibinqo",
"NonProprietaryName": "Abrocitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213871",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ABROCITINIB",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220224",
"SamplePackage": "Y",
"IndicationAndUsage": "CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.",
"Description": "CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "12634-436-54",
"PackageDescription": "14 TABLET in 1 BLISTER PACK (12634-436-54)",
"NDC11Code": "12634-0436-54",
"ProductNDC": "12634-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "12634-436-84",
"PackageDescription": "14 TABLET in 1 BOTTLE (12634-436-84)",
"NDC11Code": "12634-0436-84",
"ProductNDC": "12634-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atenolol",
"NonProprietaryName": "Atenolol",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20071204",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077877",
"LabelerName": "Apotheca Inc.",
"SubstanceName": "ATENOLOL",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"IndicationAndUsage": "Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.",
"Description": "Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate."
},
{
"NDCCode": "59735-436-01",
"PackageDescription": "1 TUBE in 1 CARTON (59735-436-01) / 14 g in 1 TUBE",
"NDC11Code": "59735-0436-01",
"ProductNDC": "59735-436",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Stick Foundation Spf Tender Beige",
"NonProprietaryName": "Stick Foundation",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20131212",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "MANA PRODUCTS, INC.",
"SubstanceName": "OCTINOXATE; OCTISALATE; TITANIUM DIOXIDE",
"StrengthNumber": "7.5; 5; 2",
"StrengthUnit": "g/100g; g/100g; g/100g",
"Status": "Deprecated",
"LastUpdate": "2026-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20131212",
"SamplePackage": "N",
"IndicationAndUsage": "Stop use and ask a doctor if rash occurs."
},
{
"NDCCode": "67877-436-14",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (67877-436-14) / 14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK",
"NDC11Code": "67877-0436-14",
"ProductNDC": "67877-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Minocycline Hydrochloride",
"NonProprietaryName": "Minocycline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20191223",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA204453",
"LabelerName": "Ascend Laboratories, LLC",
"SubstanceName": "MINOCYCLINE HYDROCHLORIDE",
"StrengthNumber": "55",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]",
"Status": "Active",
"LastUpdate": "2025-12-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20191223",
"SamplePackage": "N",
"IndicationAndUsage": "Minocycline hydrochloride extended-release tablets is indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].",
"Description": "Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα, 12aα)]-4,7–Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is represented below:. C23H27N3O7HCl M. W. 493.95. Minocycline hydrochloride extended-release tablets, USP for oral administration contain minocycline hydrochloride USP equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg, and 135 mg of minocycline. In addition, 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg, and 135 mg tablets contain the following inactive ingredients: lactose monohydrate, hypromellose type 2910, hypromellose type 2208, colloidal silicon dioxide, magnesium stearate, titanium dioxide and triacetin. The 45 mg tablets also contain iron oxide black. The 65 mg tablets also contain FD&C blue #1/brilliant blue FCF aluminium lake. polyethylene glycol 3350, FD&C blue #2/indigo carmine aluminum lake and D&C yellow #10 aluminum lake. The 55 mg tablets also contain macrogol, FD&C RED #40. The 80 mg tablets also contain macrogol, FD&C blue #2, FD&C red #40, FD&C yellow #6. The 90 mg tablets also contain iron oxide yellow and polyethylene glycol 3350. The 105 mg tablets also D&C red #27, macrogol, FD&C blue #1. The 115 mg tablets also contain D&C yellow #10 aluminum lake, FD&C blue #1/brilliant blue FCF aluminium lake and FD&C blue #2/indigo carmine aluminum lake. The 135 mg tablets also contain polyethylene glycol 3350 and iron oxide red. The USP Dissolution Test is pending."
},
{
"NDCCode": "70934-436-14",
"PackageDescription": "14 TABLET in 1 BOTTLE, PLASTIC (70934-436-14) ",
"NDC11Code": "70934-0436-14",
"ProductNDC": "70934-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Metronidazole",
"NonProprietaryName": "Metronidazole",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20190909",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA070033",
"LabelerName": "Denton Pharma, Inc. DBA Northwind Pharmaceuticals",
"SubstanceName": "METRONIDAZOLE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20190909",
"SamplePackage": "N",
"IndicationAndUsage": "Metronidazole tablets are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).",
"Description": "Metronidazole, USP is an oral synthetic antiprotozoal and antibacterial agent, 1 H-Imidazole-1-ethanol, 2-methyl-5-nitro, which has the following structural formula:. C 6H 9N 3O 3 M.W. 171.15. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil."
},
{
"NDCCode": "63539-014-90",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (63539-014-90) > 14 CAPSULE in 1 BLISTER PACK",
"NDC11Code": "63539-0014-90",
"ProductNDC": "63539-014",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyrica",
"NonProprietaryName": "Pregabalin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20041230",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021446",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "PREGABALIN",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"DEASchedule": "CV",
"Status": "Deprecated",
"LastUpdate": "2022-12-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20041230",
"SamplePackage": "N"
},
{
"NDCCode": "63539-019-01",
"PackageDescription": "14 CAPSULE in 1 BOTTLE (63539-019-01) ",
"NDC11Code": "63539-0019-01",
"ProductNDC": "63539-019",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sutent",
"NonProprietaryName": "Sunitinib Malate",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20060126",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021938",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "SUNITINIB MALATE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-06-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20170502",
"SamplePackage": "Y",
"IndicationAndUsage": "SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).",
"Description": "Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide."
},
{
"NDCCode": "63539-236-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (63539-236-14) ",
"NDC11Code": "63539-0236-14",
"ProductNDC": "63539-236",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cibinqo",
"NonProprietaryName": "Abrocitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213871",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ABROCITINIB",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220224",
"SamplePackage": "Y",
"IndicationAndUsage": "CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.",
"Description": "CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "63539-336-14",
"PackageDescription": "14 TABLET, FILM COATED in 1 BOTTLE (63539-336-14) ",
"NDC11Code": "63539-0336-14",
"ProductNDC": "63539-336",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cibinqo",
"NonProprietaryName": "Abrocitinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20220224",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA213871",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ABROCITINIB",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220224",
"SamplePackage": "Y",
"IndicationAndUsage": "CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.",
"Description": "CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin."
},
{
"NDCCode": "63539-473-10",
"PackageDescription": "1 KIT in 1 CARTON (63539-473-10) * 11 TABLET, FILM COATED in 1 BLISTER PACK * 14 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63539-0473-10",
"ProductNDC": "63539-473",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Chantix",
"NonProprietaryName": "Varenicline Tartrate",
"DosageFormName": "KIT",
"StartMarketingDate": "20060510",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021928",
"LabelerName": "U.S. Pharmaceuticals",
"Status": "Deprecated",
"LastUpdate": "2021-08-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20060510",
"SamplePackage": "N"
},
{
"NDCCode": "63539-501-14",
"PackageDescription": "14 TABLET, EXTENDED RELEASE in 1 BOTTLE (63539-501-14) ",
"NDC11Code": "63539-0501-14",
"ProductNDC": "63539-501",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Xeljanz",
"ProprietaryNameSuffix": "Xr",
"NonProprietaryName": "Tofacitinib",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20160307",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA208246",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "TOFACITINIB CITRATE",
"StrengthNumber": "11",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2026-03-31",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20160307",
"SamplePackage": "N"
},
{
"NDCCode": "63539-117-01",
"PackageDescription": "120 TABLET, FILM COATED in 1 BOTTLE (63539-117-01) ",
"NDC11Code": "63539-0117-01",
"ProductNDC": "63539-117",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120904",
"SamplePackage": "N",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "63539-193-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (63539-193-30) ",
"NDC11Code": "63539-0193-30",
"ProductNDC": "63539-193",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bosulif",
"NonProprietaryName": "Bosutinib",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120904",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA203341",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "BOSUTINIB MONOHYDRATE",
"StrengthNumber": "400",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2026-05-29",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180221",
"SamplePackage": "Y",
"IndicationAndUsage": "BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].",
"Description": "BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution."
},
{
"NDCCode": "63539-234-45",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (63539-234-45) > 1 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63539-0234-45",
"ProductNDC": "63539-234",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Relpax",
"NonProprietaryName": "Eletriptan Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20021226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021016",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ELETRIPTAN HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20021226",
"SamplePackage": "N"
},
{
"NDCCode": "63539-234-79",
"PackageDescription": "1 TABLET, FILM COATED in 1 BLISTER PACK (63539-234-79) ",
"NDC11Code": "63539-0234-79",
"ProductNDC": "63539-234",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Relpax",
"NonProprietaryName": "Eletriptan Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20021226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021016",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ELETRIPTAN HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20021226",
"SamplePackage": "N"
},
{
"NDCCode": "63539-234-96",
"PackageDescription": "8 BLISTER PACK in 1 CARTON (63539-234-96) > 2 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "63539-0234-96",
"ProductNDC": "63539-234",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Relpax",
"NonProprietaryName": "Eletriptan Hydrobromide",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20021226",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021016",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ELETRIPTAN HYDROBROMIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-07-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20021226",
"SamplePackage": "N"
},
{
"NDCCode": "63539-252-02",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (63539-252-02) / 1.1 mL in 1 VIAL, SINGLE-DOSE (63539-252-01) ",
"NDC11Code": "63539-0252-02",
"ProductNDC": "63539-252",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Elrexfio",
"NonProprietaryName": "Elranatamab-bcmm",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "SUBCUTANEOUS",
"StartMarketingDate": "20230815",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA761345",
"LabelerName": "U.S. Pharmaceuticals",
"SubstanceName": "ELRANATAMAB",
"StrengthNumber": "44",
"StrengthUnit": "mg/1.1mL",
"Status": "Active",
"LastUpdate": "2026-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230815",
"SamplePackage": "Y",
"IndicationAndUsage": "ELREXFIO is indicated for the treatment of adult patients with relapsed or refractory multiple myeloma who have received at least four prior lines of therapy, including a proteasome inhibitor, an immunomodulatory agent, and an anti-CD38 monoclonal antibody. This indication is approved under accelerated approval based on response rate and durability of response [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification of clinical benefit in a confirmatory trial(s).",
"Description": "Elranatamab-bcmm is a bispecific B-cell maturation antigen (BCMA)-directed CD3 T-cell engager. It is a bispecific, humanized immunoglobulin 2-alanine (IgG2Δa) kappa antibody derived from two monoclonal antibodies (mAbs), an anti-BCMA mAb and an anti-CD3 mAb. Each of these mAbs contributes one distinct heavy (H) chain and one distinct light (L) chain to the bispecific elranatamab-bcmm. The resulting 4-chain bispecific antibody is covalently linked via five inter-chain disulfide bonds. Elranatamab-bcmm is produced using two recombinant Chinese hamster ovary (CHO) cell lines, one that contains the DNA encoding the sequence for anti-BCMA monoclonal antibody (mAb) and one that contains the sequence for anti-CD3 mAb, which are grown separately in suspension culture using chemically-defined (CD), animal-derived component-free (ACF) media. The molecular weight of elranatamab-bcmm is approximately 148.5 kDa. ELREXFIO® (elranatamab-bcmm) injection is a sterile, preservative-free, clear to slightly opalescent, and colorless to pale brown liquid solution for subcutaneous administration. ELREXFIO (elranatamab-bcmm) is supplied at a concentration of 40 mg/mL in either 76 mg/1.9 mL or 44 mg/1.1 mL single-dose vials. Each mL of solution contains 40 mg elranatamab-bcmm, edetate disodium (0.045 mg), histidine (1.12 mg), L-histidine hydrochloride monohydrate (2.67 mg), polysorbate 80 (0.2 mg), sucrose (85 mg) and Water for Injection. The pH is 5.8."
},
{
"NDCCode": "16590-436-25",
"PackageDescription": "25 TABLET, COATED in 1 BOTTLE (16590-436-25)",
"NDC11Code": "16590-0436-25",
"ProductNDC": "16590-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambien",
"ProprietaryNameSuffix": "Cr",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021774",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].",
"Description": "Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide."
},
{
"NDCCode": "16590-436-28",
"PackageDescription": "28 TABLET, COATED in 1 BOTTLE (16590-436-28)",
"NDC11Code": "16590-0436-28",
"ProductNDC": "16590-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambien",
"ProprietaryNameSuffix": "Cr",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021774",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].",
"Description": "Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide."
},
{
"NDCCode": "16590-436-30",
"PackageDescription": "30 TABLET, COATED in 1 BOTTLE (16590-436-30)",
"NDC11Code": "16590-0436-30",
"ProductNDC": "16590-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambien",
"ProprietaryNameSuffix": "Cr",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021774",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].",
"Description": "Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide."
},
{
"NDCCode": "16590-436-60",
"PackageDescription": "60 TABLET, COATED in 1 BOTTLE (16590-436-60)",
"NDC11Code": "16590-0436-60",
"ProductNDC": "16590-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ambien",
"ProprietaryNameSuffix": "Cr",
"NonProprietaryName": "Zolpidem Tartrate",
"DosageFormName": "TABLET, COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20090630",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021774",
"LabelerName": "STAT Rx USA LLC",
"SubstanceName": "ZOLPIDEM TARTRATE",
"StrengthNumber": "12.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2018-02-07",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].",
"Description": "Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide."
},
{
"NDCCode": "54860-436-01",
"PackageDescription": "28 mL in 1 BOTTLE, SPRAY (54860-436-01) ",
"NDC11Code": "54860-0436-01",
"ProductNDC": "54860-436",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Smart Care Assorted Licensed Sanitizer Spider Man",
"ProprietaryNameSuffix": "01",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250212",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M003",
"LabelerName": "Shenzhen Lantern Scicence Co.,Ltd.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Active",
"LastUpdate": "2025-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250212",
"SamplePackage": "Y",
"IndicationAndUsage": "Adults and children 6 years and older Spray onto hands and rub together unil dry. Recommended for repeat use. Children under 6 years of age should be supervised when using this product.",
"Description": "drug facts."
},
{
"NDCCode": "55289-436-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-436-30) ",
"NDC11Code": "55289-0436-30",
"ProductNDC": "55289-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Benicar",
"NonProprietaryName": "Olmesartan Medoxomil",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20020425",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021286",
"LabelerName": "PD-Rx Pharmaceuticals, Inc.",
"SubstanceName": "OLMESARTAN MEDOXOMIL",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20120425",
"SamplePackage": "N"
},
{
"NDCCode": "59651-436-01",
"PackageDescription": "100 TABLET in 1 BOTTLE (59651-436-01) ",
"NDC11Code": "59651-0436-01",
"ProductNDC": "59651-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214982",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".0625",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220208",
"SamplePackage": "N",
"IndicationAndUsage": "Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "59651-436-99",
"PackageDescription": "1000 TABLET in 1 BOTTLE (59651-436-99) ",
"NDC11Code": "59651-0436-99",
"ProductNDC": "59651-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Digoxin",
"NonProprietaryName": "Digoxin",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220208",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214982",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "DIGOXIN",
"StrengthNumber": ".0625",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cardiac Glycoside [EPC], Cardiac Glycosides [CS]",
"Status": "Active",
"LastUpdate": "2024-06-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220208",
"SamplePackage": "N",
"IndicationAndUsage": "Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).",
"Description": "Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "65162-436-03",
"PackageDescription": "30 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-03) ",
"NDC11Code": "65162-0436-03",
"ProductNDC": "65162-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203995",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; 200",
"StrengthUnit": "mg/1; ug/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].",
"Description": "Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate."
},
{
"NDCCode": "65162-436-06",
"PackageDescription": "60 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-06) ",
"NDC11Code": "65162-0436-06",
"ProductNDC": "65162-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203995",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; 200",
"StrengthUnit": "mg/1; ug/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].",
"Description": "Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate."
},
{
"NDCCode": "65162-436-09",
"PackageDescription": "90 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-09) ",
"NDC11Code": "65162-0436-09",
"ProductNDC": "65162-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203995",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; 200",
"StrengthUnit": "mg/1; ug/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].",
"Description": "Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate."
},
{
"NDCCode": "65162-436-10",
"PackageDescription": "100 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-10) ",
"NDC11Code": "65162-0436-10",
"ProductNDC": "65162-436",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20161201",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA203995",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; 200",
"StrengthUnit": "mg/1; ug/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]",
"Status": "Active",
"LastUpdate": "2026-02-14",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20161201",
"SamplePackage": "N",
"IndicationAndUsage": "Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].",
"Description": "Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>63539-436-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (63539-436-14) </PackageDescription>
<NDC11Code>63539-0436-14</NDC11Code>
<ProductNDC>63539-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cibinqo</ProprietaryName>
<NonProprietaryName>Abrocitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213871</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ABROCITINIB</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220224</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.</IndicationAndUsage>
<Description>CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>12634-436-54</NDCCode>
<PackageDescription>14 TABLET in 1 BLISTER PACK (12634-436-54)</PackageDescription>
<NDC11Code>12634-0436-54</NDC11Code>
<ProductNDC>12634-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>12634-436-84</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE (12634-436-84)</PackageDescription>
<NDC11Code>12634-0436-84</NDC11Code>
<ProductNDC>12634-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atenolol</ProprietaryName>
<NonProprietaryName>Atenolol</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20071204</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077877</ApplicationNumber>
<LabelerName>Apotheca Inc.</LabelerName>
<SubstanceName>ATENOLOL</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA],beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Atenolol tablets are indicated for the treatment of hypertension, to lower blood pressure. Lowering blood pressure lowers the risk of fatal and non-fatal cardiovascular events, primarily strokes and myocardial infarctions. These benefits have been seen in controlled trials of antihypertensive drugs from a wide variety of pharmacologic classes including atenolol. Control of high blood pressure should be part of comprehensive cardiovascular risk management, including, as appropriate, lipid control, diabetes management, antithrombotic therapy, smoking cessation, exercise, and limited sodium intake. Many patients will require more than 1 drug to achieve blood pressure goals. For specific advice on goals and management, see published guidelines, such as those of the National High Blood Pressure Education Program's Joint National Committee on Prevention, Detection, Evaluation, and Treatment of High Blood Pressure (JNC). Numerous antihypertensive drugs, from a variety of pharmacologic classes and with different mechanisms of action, have been shown in randomized controlled trials to reduce cardiovascular morbidity and mortality, and it can be concluded that it is blood pressure reduction, and not some other pharmacologic property of the drugs, that is largely responsible for those benefits. The largest and most consistent cardiovascular outcome benefit has been a reduction in the risk of stroke, but reductions in myocardial infarction and cardiovascular mortality also have been seen regularly. Elevated systolic or diastolic pressure causes increased cardiovascular risk, and the absolute risk increase per mmHg is greater at higher blood pressures, so that even modest reductions of severe hypertension can provide substantial benefit. Relative risk reduction from blood pressure reduction is similar across populations with varying absolute risk, so the absolute benefit is greater in patients who are at higher risk independent of their hypertension (for example, patients with diabetes or hyperlipidemia), and such patients would be expected to benefit from more aggressive treatment to a lower blood pressure goal. Some antihypertensive drugs have smaller blood pressure effects (as monotherapy) in black patients, and many antihypertensive drugs have additional approved indications and effects (eg, on angina, heart failure, or diabetic kidney disease). These considerations may guide selection of therapy. Atenolol tablets may be administered with other antihypertensive agents.</IndicationAndUsage>
<Description>Atenolol, a synthetic, beta 1-selective (cardioselective) adrenoreceptor blocking agent, may be chemically described as benzeneacetamide, 4 -[2’-hydroxy-3’-[(1- methylethyl) amino] propoxy]-. The molecular formula is C 14H 22N 2O 3 and its structural formula is:. Atenolol (free base) has a molecular weight of 266. It is a relatively polar hydrophilic compound with a water solubility of 26.5 mg/mL at 37° C and a log partition coefficient (octanol/water) of 0.23. It is freely soluble in 1N HCl (300 mg/mL at 25° C) and less soluble in chloroform (3 mg/mL at 25° C). Atenolol tablets, USP are available as 25, 50 and 100 mg tablets for oral administration. Inactive Ingredients: Colloidal silicon dioxide, corn starch, magnesium carbonate, magnesium stearate, sodium lauryl sulfate, sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>59735-436-01</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (59735-436-01) / 14 g in 1 TUBE</PackageDescription>
<NDC11Code>59735-0436-01</NDC11Code>
<ProductNDC>59735-436</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Stick Foundation Spf Tender Beige</ProprietaryName>
<NonProprietaryName>Stick Foundation</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20131212</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>MANA PRODUCTS, INC.</LabelerName>
<SubstanceName>OCTINOXATE; OCTISALATE; TITANIUM DIOXIDE</SubstanceName>
<StrengthNumber>7.5; 5; 2</StrengthNumber>
<StrengthUnit>g/100g; g/100g; g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131212</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Stop use and ask a doctor if rash occurs.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>67877-436-14</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (67877-436-14) / 14 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>67877-0436-14</NDC11Code>
<ProductNDC>67877-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Minocycline Hydrochloride</ProprietaryName>
<NonProprietaryName>Minocycline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20191223</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA204453</ApplicationNumber>
<LabelerName>Ascend Laboratories, LLC</LabelerName>
<SubstanceName>MINOCYCLINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>55</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Prothrombin Activity [PE], Tetracycline-class Drug [EPC], Tetracyclines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191223</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Minocycline hydrochloride extended-release tablets is indicated to treat inflammatory lesions of non-nodular moderate to severe acne vulgaris in patients 12 years of age and older. Limitations of Use: 1 Minocycline hydrochloride extended-release tablets did not demonstrate any effect on non-inflammatory acne lesions., 2 This formulation of minocycline has not been evaluated in the treatment of infections [see Clinical Studies (14)]., 3 To reduce the development of drug-resistant bacteria as well as to maintain the effectiveness of other antibacterial drugs, use minocycline hydrochloride extended-release tablets only as indicated [see Warnings and Precautions (5.12)].</IndicationAndUsage>
<Description>Minocycline hydrochloride, a semi synthetic derivative of tetracycline, is [4S-(4α,4aα,5aα, 12aα)]-4,7–Bis(dimethylamino)-1,4,4a,5,5a,6,11,12a-octahydro-3,10,12,12a-tetrahydroxy-1,11-dioxo-2-naphthacenecarboxamide monohydrochloride. The structural formula is represented below:. C23H27N3O7HCl M. W. 493.95. Minocycline hydrochloride extended-release tablets, USP for oral administration contain minocycline hydrochloride USP equivalent to 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg, and 135 mg of minocycline. In addition, 45 mg, 55 mg, 65 mg, 80 mg, 90 mg, 105 mg, 115 mg, and 135 mg tablets contain the following inactive ingredients: lactose monohydrate, hypromellose type 2910, hypromellose type 2208, colloidal silicon dioxide, magnesium stearate, titanium dioxide and triacetin. The 45 mg tablets also contain iron oxide black. The 65 mg tablets also contain FD&C blue #1/brilliant blue FCF aluminium lake. polyethylene glycol 3350, FD&C blue #2/indigo carmine aluminum lake and D&C yellow #10 aluminum lake. The 55 mg tablets also contain macrogol, FD&C RED #40. The 80 mg tablets also contain macrogol, FD&C blue #2, FD&C red #40, FD&C yellow #6. The 90 mg tablets also contain iron oxide yellow and polyethylene glycol 3350. The 105 mg tablets also D&C red #27, macrogol, FD&C blue #1. The 115 mg tablets also contain D&C yellow #10 aluminum lake, FD&C blue #1/brilliant blue FCF aluminium lake and FD&C blue #2/indigo carmine aluminum lake. The 135 mg tablets also contain polyethylene glycol 3350 and iron oxide red. The USP Dissolution Test is pending.</Description>
</NDC>
<NDC>
<NDCCode>70934-436-14</NDCCode>
<PackageDescription>14 TABLET in 1 BOTTLE, PLASTIC (70934-436-14) </PackageDescription>
<NDC11Code>70934-0436-14</NDC11Code>
<ProductNDC>70934-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Metronidazole</ProprietaryName>
<NonProprietaryName>Metronidazole</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190909</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA070033</ApplicationNumber>
<LabelerName>Denton Pharma, Inc. DBA Northwind Pharmaceuticals</LabelerName>
<SubstanceName>METRONIDAZOLE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitroimidazole Antimicrobial [EPC],Nitroimidazoles [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Metronidazole tablets are indicated for the treatment of T. vaginalis infection in females and males when the presence of the trichomonad has been confirmed by appropriate laboratory procedures (wet smears and/or cultures).</IndicationAndUsage>
<Description>Metronidazole, USP is an oral synthetic antiprotozoal and antibacterial agent, 1 H-Imidazole-1-ethanol, 2-methyl-5-nitro, which has the following structural formula:. C 6H 9N 3O 3 M.W. 171.15. Each tablet for oral administration contains 250 mg or 500 mg of metronidazole, USP. Inactive ingredients include silicified microcrystalline cellulose, crospovidone, colloidal silicon dioxide and hydrogenated vegetable oil.</Description>
</NDC>
<NDC>
<NDCCode>63539-014-90</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (63539-014-90) > 14 CAPSULE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63539-0014-90</NDC11Code>
<ProductNDC>63539-014</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyrica</ProprietaryName>
<NonProprietaryName>Pregabalin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20041230</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021446</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>PREGABALIN</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2022-12-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20041230</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-019-01</NDCCode>
<PackageDescription>14 CAPSULE in 1 BOTTLE (63539-019-01) </PackageDescription>
<NDC11Code>63539-0019-01</NDC11Code>
<ProductNDC>63539-019</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sutent</ProprietaryName>
<NonProprietaryName>Sunitinib Malate</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060126</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021938</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>SUNITINIB MALATE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Kinase Inhibitor [EPC], Protein Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-06-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20170502</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>SUTENT is a kinase inhibitor indicated for: 1 treatment of adult patients with gastrointestinal stromal tumor (GIST) after disease progression on or intolerance to imatinib mesylate. (1.1), 2 treatment of adult patients with advanced renal cell carcinoma (RCC). (1.2), 3 adjuvant treatment of adult patients at high risk of recurrent RCC following nephrectomy. (1.3), 4 treatment of progressive, well-differentiated pancreatic neuroendocrine tumors (pNET) in adult patients with unresectable locally advanced or metastatic disease. (1.4).</IndicationAndUsage>
<Description>Sunitinib is a kinase inhibitor present in SUTENT capsules as the malate salt. Sunitinib malate is described chemically as (2S)-2-hydroxybutanedoic acid with N-[2-(diethylamino)ethyl]-5-[(Z)-(5-fluoro-1,2-dihydro-2-oxo-3H-indol-3-ylidine)methyl]-2,4-dimethyl-1H-pyrrole-3-carboxamide (1:1). The molecular formula is C22H27FN4O2 ∙ C4H6O5 and the molecular weight is 532.6 Daltons. The chemical structure of sunitinib malate is. Sunitinib malate is a yellow to orange powder with a pKa of 8.95. The solubility of sunitinib malate in aqueous media over the range pH 1.2 to pH 6.8 is in excess of 25 mg/mL. The log of the distribution coefficient (octanol/water) at pH 7 is 5.2. SUTENT (sunitinib malate) capsules are supplied as printed hard shell capsules containing 12.5 mg, 25 mg, 37.5 mg or 50 mg of sunitinib (equivalent to 16.7 mg, 33.4 mg, 50.1 mg, or 66.8 mg of sunitinib malate, respectively). The capsules contain the following inactive ingredients: croscarmellose sodium, magnesium stearate, mannitol, and povidone (K-25). The orange gelatin capsule shells contain titanium dioxide and red iron oxide; the caramel gelatin capsule shells contain titanium dioxide, red iron oxide, yellow iron oxide, and black iron oxide; and the yellow gelatin capsule shells contain titanium dioxide and yellow iron oxide. The white printing ink contains shellac, propylene glycol, sodium hydroxide, povidone, and titanium dioxide and the black printing ink contains shellac, propylene glycol, potassium hydroxide, and black iron oxide.</Description>
</NDC>
<NDC>
<NDCCode>63539-236-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (63539-236-14) </PackageDescription>
<NDC11Code>63539-0236-14</NDC11Code>
<ProductNDC>63539-236</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cibinqo</ProprietaryName>
<NonProprietaryName>Abrocitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213871</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ABROCITINIB</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220224</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.</IndicationAndUsage>
<Description>CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>63539-336-14</NDCCode>
<PackageDescription>14 TABLET, FILM COATED in 1 BOTTLE (63539-336-14) </PackageDescription>
<NDC11Code>63539-0336-14</NDC11Code>
<ProductNDC>63539-336</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cibinqo</ProprietaryName>
<NonProprietaryName>Abrocitinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220224</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA213871</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ABROCITINIB</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA], P-Glycoprotein Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220224</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>CIBINQO is indicated for the treatment of adults and pediatric patients 12 years of age and older with refractory, moderate-to-severe atopic dermatitis whose disease is not adequately controlled with other systemic drug products, including biologics, or when use of those therapies is inadvisable. Limitations of Use. CIBINQO is not recommended for use in combination with other JAK inhibitors, biologic immunomodulators, or other immunosuppressants.</IndicationAndUsage>
<Description>CIBINQO (abrocitinib) tablets contain the free base of abrocitinib, a Janus kinase (JAK) inhibitor, for oral administration. Abrocitinib is a white to pale colored powder with the following chemical name: N-((1s,3s)-3-(methyl(7H-pyrrolo[2,3-d]pyrimidin-4-yl)amino)cyclobutyl)propane-1-sulfonamide. The solubility of abrocitinib in water is 0.04 mg/mL at 25ºC. Abrocitinib has a molecular weight of 323.42 g/mol and a molecular formula of C14H21N5O2S. The structural formula of abrocitinib is. Each film-coated tablet contains 50 mg or 100 mg or 200 mg of abrocitinib and the following inactive ingredients: dibasic calcium phosphate anhydrous, hypromellose, iron oxide red, lactose monohydrate, Macrogol, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, titanium dioxide, and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>63539-473-10</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (63539-473-10) * 11 TABLET, FILM COATED in 1 BLISTER PACK * 14 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63539-0473-10</NDC11Code>
<ProductNDC>63539-473</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Chantix</ProprietaryName>
<NonProprietaryName>Varenicline Tartrate</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20060510</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021928</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<Status>Deprecated</Status>
<LastUpdate>2021-08-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-501-14</NDCCode>
<PackageDescription>14 TABLET, EXTENDED RELEASE in 1 BOTTLE (63539-501-14) </PackageDescription>
<NDC11Code>63539-0501-14</NDC11Code>
<ProductNDC>63539-501</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Xeljanz</ProprietaryName>
<ProprietaryNameSuffix>Xr</ProprietaryNameSuffix>
<NonProprietaryName>Tofacitinib</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160307</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA208246</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>TOFACITINIB CITRATE</SubstanceName>
<StrengthNumber>11</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Janus Kinase Inhibitor [EPC], Janus Kinase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-03-31</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160307</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-117-01</NDCCode>
<PackageDescription>120 TABLET, FILM COATED in 1 BOTTLE (63539-117-01) </PackageDescription>
<NDC11Code>63539-0117-01</NDC11Code>
<ProductNDC>63539-117</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120904</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>63539-193-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (63539-193-30) </PackageDescription>
<NDC11Code>63539-0193-30</NDC11Code>
<ProductNDC>63539-193</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bosulif</ProprietaryName>
<NonProprietaryName>Bosutinib</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120904</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA203341</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>BOSUTINIB MONOHYDRATE</SubstanceName>
<StrengthNumber>400</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bcr-Abl Tyrosine Kinase Inhibitors [MoA], Kinase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-05-29</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180221</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>BOSULIF is indicated for the treatment of: 1 Adult and pediatric patients 1 year of age and older with chronic phase (CP) Philadelphia chromosome-positive chronic myelogenous leukemia (Ph+ CML), newly-diagnosed or resistant or intolerant to prior therapy [see Clinical Studies (14.1, 14.2, 14.3)]., 2 Adult patients with accelerated phase (AP), or blast phase (BP) Ph+ CML with resistance or intolerance to prior therapy [see Clinical Studies (14.2)].</IndicationAndUsage>
<Description>BOSULIF contains bosutinib, a kinase inhibitor. Bosutinib is present as a monohydrate with a chemical name of 3-Quinolinecarbonitrile, 4-[(2,4-dichloro-5-methoxyphenyl)amino]-6-methoxy-7-[3-(4-methyl-1-piperazinyl) propoxy]-, hydrate (1:1). Its chemical formula is C26H29Cl2N5O3∙H2O (monohydrate); its molecular weight is 548.46 (monohydrate), equivalent to 530.46 (anhydrous). Bosutinib monohydrate has the following chemical structure:. Bosutinib monohydrate is a white to yellowish-tan powder. Bosutinib monohydrate has a pH dependent solubility across the physiological pH range. At or below pH 5, bosutinib monohydrate behaves as a highly soluble compound. Above pH 5, the solubility of bosutinib monohydrate reduces rapidly. BOSULIF® (bosutinib) tablets are supplied for oral administration in 3 strengths: 100 mg, 400 mg and 500 mg. Each strength reflects the equivalent amount of bosutinib content (on anhydrous basis). The tablets contain the following inactive ingredients: croscarmellose sodium, iron oxide red (for 400 mg, and 500 mg tablet) and iron oxide yellow (for 100 mg, and 400 mg tablet), magnesium stearate, microcrystalline cellulose, poloxamer, polyethylene glycol, polyvinyl alcohol, povidone, talc and titanium dioxide. BOSULIF® (bosutinib) capsules are supplied for oral administration in 2 strengths: 50 mg and 100 mg. Each strength reflects the equivalent amount of bosutinib (on anhydrous basis). The capsules contain the following inactive ingredients: croscarmellose sodium, gelatin, magnesium stearate, mannitol, microcrystalline cellulose, poloxamer, povidone, red iron oxide, titanium dioxide, yellow iron oxide. The printing ink contains black iron oxide, potassium hydroxide, propylene glycol, shellac, strong ammonia solution.</Description>
</NDC>
<NDC>
<NDCCode>63539-234-45</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (63539-234-45) > 1 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63539-0234-45</NDC11Code>
<ProductNDC>63539-234</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Relpax</ProprietaryName>
<NonProprietaryName>Eletriptan Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021016</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ELETRIPTAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-234-79</NDCCode>
<PackageDescription>1 TABLET, FILM COATED in 1 BLISTER PACK (63539-234-79) </PackageDescription>
<NDC11Code>63539-0234-79</NDC11Code>
<ProductNDC>63539-234</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Relpax</ProprietaryName>
<NonProprietaryName>Eletriptan Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021016</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ELETRIPTAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-234-96</NDCCode>
<PackageDescription>8 BLISTER PACK in 1 CARTON (63539-234-96) > 2 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>63539-0234-96</NDC11Code>
<ProductNDC>63539-234</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Relpax</ProprietaryName>
<NonProprietaryName>Eletriptan Hydrobromide</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20021226</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021016</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ELETRIPTAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA],Serotonin 1d Receptor Agonists [MoA],Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-07-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20021226</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>63539-252-02</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (63539-252-02) / 1.1 mL in 1 VIAL, SINGLE-DOSE (63539-252-01) </PackageDescription>
<NDC11Code>63539-0252-02</NDC11Code>
<ProductNDC>63539-252</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Elrexfio</ProprietaryName>
<NonProprietaryName>Elranatamab-bcmm</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>SUBCUTANEOUS</RouteName>
<StartMarketingDate>20230815</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA761345</ApplicationNumber>
<LabelerName>U.S. Pharmaceuticals</LabelerName>
<SubstanceName>ELRANATAMAB</SubstanceName>
<StrengthNumber>44</StrengthNumber>
<StrengthUnit>mg/1.1mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230815</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ELREXFIO is indicated for the treatment of adult patients with relapsed or refractory multiple myeloma who have received at least four prior lines of therapy, including a proteasome inhibitor, an immunomodulatory agent, and an anti-CD38 monoclonal antibody. This indication is approved under accelerated approval based on response rate and durability of response [see Clinical Studies (14)]. Continued approval for this indication may be contingent upon verification of clinical benefit in a confirmatory trial(s).</IndicationAndUsage>
<Description>Elranatamab-bcmm is a bispecific B-cell maturation antigen (BCMA)-directed CD3 T-cell engager. It is a bispecific, humanized immunoglobulin 2-alanine (IgG2Δa) kappa antibody derived from two monoclonal antibodies (mAbs), an anti-BCMA mAb and an anti-CD3 mAb. Each of these mAbs contributes one distinct heavy (H) chain and one distinct light (L) chain to the bispecific elranatamab-bcmm. The resulting 4-chain bispecific antibody is covalently linked via five inter-chain disulfide bonds. Elranatamab-bcmm is produced using two recombinant Chinese hamster ovary (CHO) cell lines, one that contains the DNA encoding the sequence for anti-BCMA monoclonal antibody (mAb) and one that contains the sequence for anti-CD3 mAb, which are grown separately in suspension culture using chemically-defined (CD), animal-derived component-free (ACF) media. The molecular weight of elranatamab-bcmm is approximately 148.5 kDa. ELREXFIO® (elranatamab-bcmm) injection is a sterile, preservative-free, clear to slightly opalescent, and colorless to pale brown liquid solution for subcutaneous administration. ELREXFIO (elranatamab-bcmm) is supplied at a concentration of 40 mg/mL in either 76 mg/1.9 mL or 44 mg/1.1 mL single-dose vials. Each mL of solution contains 40 mg elranatamab-bcmm, edetate disodium (0.045 mg), histidine (1.12 mg), L-histidine hydrochloride monohydrate (2.67 mg), polysorbate 80 (0.2 mg), sucrose (85 mg) and Water for Injection. The pH is 5.8.</Description>
</NDC>
<NDC>
<NDCCode>16590-436-25</NDCCode>
<PackageDescription>25 TABLET, COATED in 1 BOTTLE (16590-436-25)</PackageDescription>
<NDC11Code>16590-0436-25</NDC11Code>
<ProductNDC>16590-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambien</ProprietaryName>
<ProprietaryNameSuffix>Cr</ProprietaryNameSuffix>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090630</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021774</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>16590-436-28</NDCCode>
<PackageDescription>28 TABLET, COATED in 1 BOTTLE (16590-436-28)</PackageDescription>
<NDC11Code>16590-0436-28</NDC11Code>
<ProductNDC>16590-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambien</ProprietaryName>
<ProprietaryNameSuffix>Cr</ProprietaryNameSuffix>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090630</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021774</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>16590-436-30</NDCCode>
<PackageDescription>30 TABLET, COATED in 1 BOTTLE (16590-436-30)</PackageDescription>
<NDC11Code>16590-0436-30</NDC11Code>
<ProductNDC>16590-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambien</ProprietaryName>
<ProprietaryNameSuffix>Cr</ProprietaryNameSuffix>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090630</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021774</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>16590-436-60</NDCCode>
<PackageDescription>60 TABLET, COATED in 1 BOTTLE (16590-436-60)</PackageDescription>
<NDC11Code>16590-0436-60</NDC11Code>
<ProductNDC>16590-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ambien</ProprietaryName>
<ProprietaryNameSuffix>Cr</ProprietaryNameSuffix>
<NonProprietaryName>Zolpidem Tartrate</NonProprietaryName>
<DosageFormName>TABLET, COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090630</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021774</ApplicationNumber>
<LabelerName>STAT Rx USA LLC</LabelerName>
<SubstanceName>ZOLPIDEM TARTRATE</SubstanceName>
<StrengthNumber>12.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>gamma-Aminobutyric Acid-ergic Agonist [EPC],GABA A Agonists [MoA],Pyridines [Chemical/Ingredient],Central Nervous System Depression [PE]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2018-02-07</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ambien CR (zolpidem tartrate extended-release tablets) is indicated for the treatment of insomnia characterized by difficulties with sleep onset and/or sleep maintenance (as measured by wake time after sleep onset). The clinical trials performed in support of efficacy were up to 3 weeks (using polysomnography measurement up to 2 weeks in both adult and elderly patients) and 24 weeks (using patient-reported assessment in adult patients only) in duration [see Clinical Studies (14)].</IndicationAndUsage>
<Description>Ambien CR contains zolpidem tartrate, a non-benzodiazepine hypnotic of the imidazopyridine class. Ambien CR (zolpidem tartrate extended-release tablets) is available in 6.25 mg and 12.5 mg strength tablets for oral administration. Chemically, zolpidem is N,N,6-trimethyl-2-p-tolylimidazo[1,2-a] pyridine-3-acetamide L-(+)-tartrate (2:1). It has the following structure. Zolpidem tartrate is a white to off-white crystalline powder that is sparingly soluble in water, alcohol, and propylene glycol. It has a molecular weight of 764.88. Ambien CR consists of a coated two-layer tablet: one layer that releases its drug content immediately and another layer that allows a slower release of additional drug content. The 6.25 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, red ferric oxide, sodium starch glycolate, and titanium dioxide. The 12.5 mg Ambien CR tablet contains the following inactive ingredients: colloidal silicon dioxide, FD&C Blue #2, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, potassium bitartrate, sodium starch glycolate, titanium dioxide, and yellow ferric oxide.</Description>
</NDC>
<NDC>
<NDCCode>54860-436-01</NDCCode>
<PackageDescription>28 mL in 1 BOTTLE, SPRAY (54860-436-01) </PackageDescription>
<NDC11Code>54860-0436-01</NDC11Code>
<ProductNDC>54860-436</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Smart Care Assorted Licensed Sanitizer Spider Man</ProprietaryName>
<ProprietaryNameSuffix>01</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250212</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M003</ApplicationNumber>
<LabelerName>Shenzhen Lantern Scicence Co.,Ltd.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250212</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>Adults and children 6 years and older Spray onto hands and rub together unil dry. Recommended for repeat use. Children under 6 years of age should be supervised when using this product.</IndicationAndUsage>
<Description>drug facts.</Description>
</NDC>
<NDC>
<NDCCode>55289-436-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (55289-436-30) </PackageDescription>
<NDC11Code>55289-0436-30</NDC11Code>
<ProductNDC>55289-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Benicar</ProprietaryName>
<NonProprietaryName>Olmesartan Medoxomil</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20020425</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021286</ApplicationNumber>
<LabelerName>PD-Rx Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>OLMESARTAN MEDOXOMIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Angiotensin 2 Receptor Antagonists [MoA],Angiotensin 2 Receptor Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120425</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>59651-436-01</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (59651-436-01) </PackageDescription>
<NDC11Code>59651-0436-01</NDC11Code>
<ProductNDC>59651-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214982</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.0625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>59651-436-99</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (59651-436-99) </PackageDescription>
<NDC11Code>59651-0436-99</NDC11Code>
<ProductNDC>59651-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Digoxin</ProprietaryName>
<NonProprietaryName>Digoxin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220208</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214982</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>DIGOXIN</SubstanceName>
<StrengthNumber>.0625</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cardiac Glycoside [EPC], Cardiac Glycosides [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-06-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220208</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Digoxin is a cardiac glycoside indicated for: 1 Treatment of mild to moderate heart failure in adults. (1.1), 2 Increasing myocardial contractility in pediatric patients with heart failure. (1.2), 3 Control of resting ventricular rate in patients with chronic atrial fibrillation in adults. (1.3).</IndicationAndUsage>
<Description>Digoxin is one of the cardiac (or digitalis) glycosides, a closely related group of drugs having in common specific effects on the myocardium. These drugs are found in a number of plants. Digoxin is extracted from the leaves of Digitalis lanata. The term “digitalis” is used to designate the whole group of glycosides. The glycosides are composed of 2 portions: a sugar and a cardenolide (hence “glycosides”). Digoxin is described chemically as (3β,5β,12β)-3-[(O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-O-2,6-dideoxy-β-D-ribo-hexopyranosyl-(1→4)-2,6-dideoxy-β-D-ribo-hexopyranosyl)oxy]-12,14-dihydroxy-card-20(22)-enolide. Its molecular formula is C41H64O14, its molecular weight is 780.95, and its structural formula is. Digoxin USP exists as clear to white, crystals or white crystalline powder that melt with decomposition above 230°C. The drug is practically insoluble in water, soluble in a mixture of equal volumes of methanol and methylene chloride, slightly soluble in ethanol (96 per cent). Digoxin tablets, USP are supplied as 62.5 mcg (unscored), 125 mcg (scored) and 250 mcg (scored) tablets for oral administration. Each tablet contains the labeled amount of digoxin USP and the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and pregelatinized starch (maize). In addition the 62.5 mcg tablets contain FD & C Yellow No. 6 Lake. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>65162-436-03</NDCCode>
<PackageDescription>30 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-03) </PackageDescription>
<NDC11Code>65162-0436-03</NDC11Code>
<ProductNDC>65162-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203995</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; 200</StrengthNumber>
<StrengthUnit>mg/1; ug/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-436-06</NDCCode>
<PackageDescription>60 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-06) </PackageDescription>
<NDC11Code>65162-0436-06</NDC11Code>
<ProductNDC>65162-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203995</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; 200</StrengthNumber>
<StrengthUnit>mg/1; ug/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-436-09</NDCCode>
<PackageDescription>90 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-09) </PackageDescription>
<NDC11Code>65162-0436-09</NDC11Code>
<ProductNDC>65162-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203995</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; 200</StrengthNumber>
<StrengthUnit>mg/1; ug/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate.</Description>
</NDC>
<NDC>
<NDCCode>65162-436-10</NDCCode>
<PackageDescription>100 TABLET, DELAYED RELEASE in 1 BOTTLE (65162-436-10) </PackageDescription>
<NDC11Code>65162-0436-10</NDC11Code>
<ProductNDC>65162-436</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161201</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA203995</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; 200</StrengthNumber>
<StrengthUnit>mg/1; ug/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Decreased Prostaglandin Production [PE], Nonsteroidal Anti-inflammatory Drug [EPC], Prostaglandin E1 Analog [EPC], Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-14</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20161201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diclofenac sodium and misoprostol delayed-release tablets are indicated for treatment of the signs and symptoms of osteoarthritis or rheumatoid arthritis in adult patients at high risk of developing NSAID-induced gastric and duodenal ulcers and their complications. For a list of factors that may increase the risk of NSAID-induced gastric and duodenal ulcers and their complications [see Warnings and Precautions (5.3)].</IndicationAndUsage>
<Description>Diclofenac sodium and misoprostol delayed-release tablets, USP is a combination product containing diclofenac sodium, USP, an NSAID with analgesic properties, and misoprostol, a gastrointestinal (GI) mucosal protective prostaglandin-1 (PGE1) analog. Diclofenac sodium and misoprostol delayed-release tablets are white to off-white, round, biconvex, and approximately 11 mm in diameter. Each tablet consists of an enteric-coated core containing 50 mg or 75 mg of diclofenac sodium, USP (equivalent to 46.39 mg or 69.58 mg of diclofenac, respectively) surrounded by an outer mantle containing 200 mcg misoprostol, USP. Diclofenac sodium, USP is a phenylacetic acid derivative that is a white to off-white, virtually odorless, crystalline powder. Diclofenac sodium, USP is freely soluble in methanol, soluble in ethanol, and practically insoluble in chloroform and in dilute acid. Diclofenac sodium, USP is sparingly soluble in water. Its chemical formula and name are. C14H10Cl2NO2Na [M.W. = 318.14] 2-[(2,6-dichlorophenyl) amino] benzeneacetic acid, monosodium salt. Misoprostol, USP is a water-soluble, viscous liquid that contains approximately equal amounts of two diastereomers. Its chemical formula and name are. C22H38O5 [M.W. = 382.54] (±) methyl 11α,16-dihydroxy-16-methyl-9-oxoprost-13E-en-1-oate. Inactive ingredients in diclofenac sodium and misoprostol delayed-release tablets, USP include: colloidal silicon dioxide, corn starch, crospovidone, hydrogenated castor oil, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid and ethyl acrylate copolymer dispersion, microcrystalline cellulose, povidone, sodium hydroxide, talc, and triethyl citrate.</Description>
</NDC>
</NDCList>