RESTful Lookup — Test-Drive (2007 – 2026)

<?xml version="1.0" encoding="utf-8"?>
<NDCList>
  <NDC>
    <NDCCode>64208-7753-1</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (64208-7753-1)  *  10 mL in 1 VIAL, GLASS (64208-7756-1)  *  5 mL in 1 VIAL, GLASS (64208-7755-2) </PackageDescription>
    <NDC11Code>64208-7753-01</NDC11Code>
    <ProductNDC>64208-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Coagadex</ProprietaryName>
    <NonProprietaryName>Coagulation Factor X Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20151021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125506</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Ltd</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>COAGADEX, Coagulation Factor X (Human), is a plasma-derived human blood coagulation Factor indicated in adults and children with hereditary Factor X deficiency for: 1 Routine prophylaxis to reduce the frequency of bleeding episodes, 2 On-demand treatment and control of bleeding episodes, 3 Perioperative management of bleeding in patients with mild, moderate, and severe hereditary Factor X deficiency.</IndicationAndUsage>
    <Description>COAGADEX is a plasma-derived, sterile, purified concentrate of human coagulation Factor X that contains sucrose as a stabilizer. It is formulated as a lyophilized powder for solution for intravenous administration. When reconstituted with Sterile Water for Injection it forms a colorless, clear or slightly pearl-like solution. COAGADEX contains nominally (approximately) 100 IU/mL of coagulation Factor X and the following inactive ingredients: chloride, phosphate, citrate, sucrose and sodium. Each vial of COAGADEX is labeled with the actual Factor X activity/content expressed in IU per vial. Factor X activity in IU is determined using an in vitro chromogenic assay and a Factor X concentrate reference standard calibrated against the current WHO International Standard for Blood Coagulation Factors II and X Concentrate. COAGADEX contains no added biological components such as heparin, albumin or anti-thrombin. The content of Factor II and Factor IX are ≤ 1 IU/mL of the reconstituted product. Factor Xa and Factor IIa were not detectable by Non-activated Partial Thromboplastin Time (NaPTT) or Fibrinogen Clotting Time (FCT) tests for potential thrombogenicity, and comprised &lt; 10 parts per million by weight when tested by more sensitive analytical methods. The specific activity of COAGADEX is typically 80-137 IU per mg protein. The product contains no preservatives. COAGADEX is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to human immunodeficiency virus (HIV)-1/2, hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) with nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), hepatitis C virus (HCV), hepatitis A virus (HAV) and human parvovirus B19. Furthermore, each manufacturing pool is tested to be negative for HBsAg and anti-HIV-1/2 antibodies. Also, manufacturing pools are non-reactive by nucleic acid test for HAV, HBV, HCV, and HIV-1. The limit for human parvovirus B19 in the manufacturing pools is set not to exceed 104 IU/mL. Three processing steps specifically designed to remove or inactivate viruses are. 1) Solvent/detergent treatment targeted to inactivate enveloped viruses. 2) A 15-nm filtration step designed to remove small viruses including non-enveloped viruses. 3) Terminal dry-heat treatment at 80°C for 72 hours in the final container to inactivate enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled-down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. Table 2 presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>0135-7753-01</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (0135-7753-01)  / 96.4 g in 1 TUBE</PackageDescription>
    <NDC11Code>00135-7753-01</NDC11Code>
    <ProductNDC>0135-7753</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Sensodyne</ProprietaryName>
    <ProprietaryNameSuffix>Pronamel Clinical Enamel Strength Fresh Breath</ProprietaryNameSuffix>
    <NonProprietaryName>Potassium Nitrate, Sodium Fluoride</NonProprietaryName>
    <DosageFormName>PASTE, DENTIFRICE</DosageFormName>
    <RouteName>DENTAL</RouteName>
    <StartMarketingDate>20251201</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
    <ApplicationNumber>M021</ApplicationNumber>
    <LabelerName>Haleon US Holdings LLC</LabelerName>
    <SubstanceName>POTASSIUM NITRATE; SODIUM FLUORIDE</SubstanceName>
    <StrengthNumber>50; 1.5</StrengthNumber>
    <StrengthUnit>mg/g; mg/g</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-12-01</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251201</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>builds increasing protection against painful sensitivity of the teeth to cold, heat, acids, sweets, or contact. aids in the prevention of dental cavities.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>0615-7753-39</NDCCode>
    <PackageDescription>30 CAPSULE, COATED, EXTENDED RELEASE in 1 BLISTER PACK (0615-7753-39)</PackageDescription>
    <NDC11Code>00615-7753-39</NDC11Code>
    <ProductNDC>0615-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Diltiazem Hydrochloride Extended Release</ProprietaryName>
    <ProprietaryNameSuffix>Extended Release</ProprietaryNameSuffix>
    <NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE, COATED, EXTENDED RELEASE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19991220</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA074984</ApplicationNumber>
    <LabelerName>NCS HealthCare of KY, Inc dba Vangard Labs</LabelerName>
    <SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>300</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Calcium Channel Antagonists [MoA],Calcium Channel Blocker [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2019-09-21</LastUpdate>
    <ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>50090-7753-4</NDCCode>
    <PackageDescription>30 TABLET in 1 BOTTLE (50090-7753-4) </PackageDescription>
    <NDC11Code>50090-7753-04</NDC11Code>
    <ProductNDC>50090-7753</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Loratadine</ProprietaryName>
    <NonProprietaryName>Loratadine</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20240223</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA208314</ApplicationNumber>
    <LabelerName>A-S Medication Solutions</LabelerName>
    <SubstanceName>LORATADINE</SubstanceName>
    <StrengthNumber>10</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Status>Active</Status>
    <LastUpdate>2025-11-13</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20251106</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies.</IndicationAndUsage>
  </NDC>
  <NDC>
    <NDCCode>61543-7753-4</NDCCode>
    <PackageDescription>1 TUBE in 1 CARTON (61543-7753-4)  &gt; 90 mL in 1 TUBE</PackageDescription>
    <NDC11Code>61543-7753-04</NDC11Code>
    <ProductNDC>61543-7753</ProductNDC>
    <ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
    <ProprietaryName>Solar Sense Clear Zinc Sunscreen Face And Body Broad Spectrum Spf 70</ProprietaryName>
    <NonProprietaryName>Octinoxate, Octocrylene, Zinc Oxide</NonProprietaryName>
    <DosageFormName>CREAM</DosageFormName>
    <RouteName>TOPICAL</RouteName>
    <StartMarketingDate>20130801</StartMarketingDate>
    <MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
    <ApplicationNumber>part352</ApplicationNumber>
    <LabelerName>CCA Industries, Inc.</LabelerName>
    <SubstanceName>OCTINOXATE; OCTOCRYLENE; ZINC OXIDE</SubstanceName>
    <StrengthNumber>45; 80; 145</StrengthNumber>
    <StrengthUnit>mg/mL; mg/mL; mg/mL</StrengthUnit>
    <Status>Deprecated</Status>
    <LastUpdate>2018-01-10</LastUpdate>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
  </NDC>
  <NDC>
    <NDCCode>63629-7753-1</NDCCode>
    <PackageDescription>12 TABLET in 1 BOTTLE (63629-7753-1) </PackageDescription>
    <NDC11Code>63629-7753-01</NDC11Code>
    <ProductNDC>63629-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Prednisone</ProprietaryName>
    <NonProprietaryName>Prednisone</NonProprietaryName>
    <DosageFormName>TABLET</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>19900101</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA080356</ApplicationNumber>
    <LabelerName>Bryant Ranch Prepack</LabelerName>
    <SubstanceName>PREDNISONE</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2023-01-03</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20070307</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-0</NDCCode>
    <PackageDescription>12 CAPSULE in 1 BOTTLE (68788-7753-0) </PackageDescription>
    <NDC11Code>68788-7753-00</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-1</NDCCode>
    <PackageDescription>14 CAPSULE in 1 BOTTLE (68788-7753-1) </PackageDescription>
    <NDC11Code>68788-7753-01</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-2</NDCCode>
    <PackageDescription>20 CAPSULE in 1 BOTTLE (68788-7753-2) </PackageDescription>
    <NDC11Code>68788-7753-02</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-3</NDCCode>
    <PackageDescription>30 CAPSULE in 1 BOTTLE (68788-7753-3) </PackageDescription>
    <NDC11Code>68788-7753-03</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-5</NDCCode>
    <PackageDescription>56 CAPSULE in 1 BOTTLE (68788-7753-5) </PackageDescription>
    <NDC11Code>68788-7753-05</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-6</NDCCode>
    <PackageDescription>60 CAPSULE in 1 BOTTLE (68788-7753-6) </PackageDescription>
    <NDC11Code>68788-7753-06</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-7</NDCCode>
    <PackageDescription>21 CAPSULE in 1 BOTTLE (68788-7753-7) </PackageDescription>
    <NDC11Code>68788-7753-07</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>68788-7753-8</NDCCode>
    <PackageDescription>28 CAPSULE in 1 BOTTLE (68788-7753-8) </PackageDescription>
    <NDC11Code>68788-7753-08</NDC11Code>
    <ProductNDC>68788-7753</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Clindamycin Hydrochloride</ProprietaryName>
    <NonProprietaryName>Clindamycin Hydrochloride</NonProprietaryName>
    <DosageFormName>CAPSULE</DosageFormName>
    <RouteName>ORAL</RouteName>
    <StartMarketingDate>20200701</StartMarketingDate>
    <MarketingCategoryName>ANDA</MarketingCategoryName>
    <ApplicationNumber>ANDA207402</ApplicationNumber>
    <LabelerName>Preferred Pharmaceuticals, Inc.</LabelerName>
    <SubstanceName>CLINDAMYCIN HYDROCHLORIDE</SubstanceName>
    <StrengthNumber>150</StrengthNumber>
    <StrengthUnit>mg/1</StrengthUnit>
    <Pharm_Classes>Decreased Sebaceous Gland Activity [PE], Lincosamide Antibacterial [EPC], Lincosamides [CS], Neuromuscular Blockade [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2026-03-31</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200701</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>Clindamycin is indicated in the treatment of serious infections caused by susceptible anaerobic bacteria. Clindamycin is also indicated in the treatment of serious infections due to susceptible strains of streptococci, pneumococci, and staphylococci. Its use should be reserved for penicillin-allergic patients or other patients for whom, in the judgment of the physician, a penicillin is inappropriate. Because of the risk of colitis, as described in the  BOXED WARNING, before selecting clindamycin, the physician should consider the nature of the infection and the suitability of less toxic alternatives (e.g., erythromycin). Anaerobes:Serious respiratory tract infections such as empyema, anaerobic pneumonitis, and lung abscess; serious skin and soft tissue infections; septicemia; intra-abdominal infections such as peritonitis and intra-abdominal abscess (typically resulting from anaerobic organisms resident in the normal gastrointestinal tract); infections of the female pelvis and genital tract such as endometritis, nongonococcal tubo-ovarian abscess, pelvic cellulitis, and postsurgical vaginal cuff infection. Streptococci:Serious respiratory tract infections; serious skin and soft tissue infections. Staphylococci:Serious respiratory tract infections; serious skin and soft tissue infections. Pneumococci:Serious respiratory tract infections. Bacteriologic studies should be performed to determine the causative organisms and their susceptibility to clindamycin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of clindamycin hydrochloride capsules USP and other antibacterial drugs, clindamycin hydrochloride capsules USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
    <Description>Clindamycin hydrochloride USP is the hydrated hydrochloride salt of clindamycin. Clindamycin is a semisynthetic antibiotic produced by a 7(S)-chloro-substitution of the 7(R)-hydroxyl group of the parent compound lincomycin. Clindamycin hydrochloride capsules USP contain clindamycin hydrochloride USP equivalent to 75 mg, 150 mg, or 300 mg of clindamycin. Inactive ingredients: corn starch, lactose monohydrate, magnesium stearate and talc. Composition of empty hard gelatin capsule shells: For 75 mg strength-size ‘3’: FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 150 mg Strength-Size ‘2’: titanium dioxide, FD&amp;C Blue 1, D&amp;C Yellow 10, gelatin and water. For 300 mg Strength-Size ‘0’: FD&amp;C Blue 1, titanium dioxide, gelatin and water. The empty hard gelatin capsules are printed with TekPrint  SW-0012 White Ink. Composition of imprinting ink [TekPrint  SW-0012 White Ink] utilized for printing on the capsule shell are presented below: Shellac–NF, Dehydrated alcohol–USP, Isopropyl alcohol–USP, Butyl alcohol–NF, Propylene glycol–USP, Strong ammonia solution–NF, Purified water–USP, Potassium hydroxide–NF, Titanium dioxide USP. The structural formula is represented below:.  The chemical name for clindamycin hydrochloride is Methyl 7-chloro-6,7,8-trideoxy-6-(1-methyl- trans-4-propyl-L-2-pyrrolidinecarboxamido)-1-thio-L- threo- α-D- galacto-octopyranoside monohydrochloride.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-2510-1</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (64208-2510-1)  / 250 mL in 1 VIAL, GLASS (64208-2510-2) </PackageDescription>
    <NDC11Code>64208-2510-01</NDC11Code>
    <ProductNDC>64208-2510</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuminex</ProprietaryName>
    <NonProprietaryName>Albumin Human</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200527</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125644</ApplicationNumber>
    <LabelerName>BPL</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ALBUMINEX 5% is a 5% albumin solution indicated for adults and children: 1 Hypovolemia (1.1), 2 Ascites (1.2), 3 Hypoalbuminemia including from burns (1.3), 4 Acute Nephrosis (1.4), 5 Acute Respiratory Distress Syndrome (ARDS) (1.5), 6 Cardiopulmonary Bypass (1.6).</IndicationAndUsage>
    <Description>ALBUMINEX 5% is a sterile, ready-for-use, clear, slightly viscous, almost colorless, yellow, amber or slightly green aqueous solution of human albumin for single dose intravenous infusion. It is prepared from the pooled plasma of US donors in FDA-licensed facilities in the US. The product also contains 130-160 mmol/L of sodium, less than 200 micrograms/L of aluminum and is stabilized with caprylate (0.08 mmol/g albumin) and acetyltryptophanate (0.08 mmol/g albumin) but does not contain any preservative. 12.5 g (250 mL) of ALBUMINEX 5% is oncotically equivalent to 250 mL plasma. 25 g (500 mL) of ALBUMINEX 5 % is oncotically equivalent to 500 mL plasma. The vials are closed with a synthetic rubber stopper. The stopper is not made with natural rubber latex. The viral risk from human plasma is minimized by the fractionation process and pasteurization of the albumin solution for 10 hours at 60°C (140°F) in its final container. These processes are effective for both enveloped and non-enveloped viruses. There have been no reports of virus transmission with products manufactured using this combination of processes. Typical reductions of experimental viral loads are shown in Table 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-2510-5</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (64208-2510-5)  / 500 mL in 1 VIAL, GLASS (64208-2510-6) </PackageDescription>
    <NDC11Code>64208-2510-05</NDC11Code>
    <ProductNDC>64208-2510</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuminex</ProprietaryName>
    <NonProprietaryName>Albumin Human</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200527</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125644</ApplicationNumber>
    <LabelerName>BPL</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>.05</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ALBUMINEX 5% is a 5% albumin solution indicated for adults and children: 1 Hypovolemia (1.1), 2 Ascites (1.2), 3 Hypoalbuminemia including from burns (1.3), 4 Acute Nephrosis (1.4), 5 Acute Respiratory Distress Syndrome (ARDS) (1.5), 6 Cardiopulmonary Bypass (1.6).</IndicationAndUsage>
    <Description>ALBUMINEX 5% is a sterile, ready-for-use, clear, slightly viscous, almost colorless, yellow, amber or slightly green aqueous solution of human albumin for single dose intravenous infusion. It is prepared from the pooled plasma of US donors in FDA-licensed facilities in the US. The product also contains 130-160 mmol/L of sodium, less than 200 micrograms/L of aluminum and is stabilized with caprylate (0.08 mmol/g albumin) and acetyltryptophanate (0.08 mmol/g albumin) but does not contain any preservative. 12.5 g (250 mL) of ALBUMINEX 5% is oncotically equivalent to 250 mL plasma. 25 g (500 mL) of ALBUMINEX 5 % is oncotically equivalent to 500 mL plasma. The vials are closed with a synthetic rubber stopper. The stopper is not made with natural rubber latex. The viral risk from human plasma is minimized by the fractionation process and pasteurization of the albumin solution for 10 hours at 60°C (140°F) in its final container. These processes are effective for both enveloped and non-enveloped viruses. There have been no reports of virus transmission with products manufactured using this combination of processes. Typical reductions of experimental viral loads are shown in Table 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-2512-3</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (64208-2512-3)  / 50 mL in 1 VIAL, GLASS (64208-2512-4) </PackageDescription>
    <NDC11Code>64208-2512-03</NDC11Code>
    <ProductNDC>64208-2512</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuminex</ProprietaryName>
    <NonProprietaryName>Albumin Human</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200527</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125644</ApplicationNumber>
    <LabelerName>BPL</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ALBUMINEX 25% is a 25% albumin solution indicated for adults and children : 1 Hypovolemia (1.1), 2 Ascites (1.2), 3 Hypoalbuminemia including from burns (1.3), 4 Acute Nephrosis (1.4), 5 Acute Respiratory Distress Syndrome (ARDS) (1.5), 6 Cardiopulmonary Bypass (1.6).</IndicationAndUsage>
    <Description>ALBUMINEX 25% is a sterile, ready-for-use, clear, slightly viscous, almost colorless, yellow, amber or slightly green aqueous solution of human albumin for single dose intravenous infusion. It is prepared from the pooled plasma of US donors in FDA-licensed facilities in the US. The product also contains 130-160 mmol/L of sodium, less than 200 micrograms/L of aluminum and is stabilized with caprylate (0.08 mmol/g albumin) and acetyltryptophanate (0.08 mmol/g albumin) but does not contain any preservative. 12.5 g (50 mL) of ALBUMINEX 25% is oncotically equivalent to 250 mL plasma.25 g (100 mL) of ALBUMINEX 25% is oncotically equivalent to 500 mL plasma. The vials are closed with a synthetic rubber stopper. The stopper is not made with natural rubber latex. The viral risk from human plasma is minimized by the fractionation process and pasteurization of the albumin solution for 10 hours at 60°C (140°F) in its final container. These processes are effective for both enveloped and non-enveloped viruses. There have been no reports of virus transmission with products manufactured using this combination of processes. Typical reductions of experimental viral loads are shown in Table 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-2512-7</NDCCode>
    <PackageDescription>1 VIAL, GLASS in 1 CARTON (64208-2512-7)  / 100 mL in 1 VIAL, GLASS (64208-2512-8) </PackageDescription>
    <NDC11Code>64208-2512-07</NDC11Code>
    <ProductNDC>64208-2512</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Albuminex</ProprietaryName>
    <NonProprietaryName>Albumin Human</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20200527</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125644</ApplicationNumber>
    <LabelerName>BPL</LabelerName>
    <SubstanceName>ALBUMIN HUMAN</SubstanceName>
    <StrengthNumber>.25</StrengthNumber>
    <StrengthUnit>g/mL</StrengthUnit>
    <Pharm_Classes>Human Serum Albumin [EPC], Increased Intravascular Volume [PE], Increased Oncotic Pressure [PE], Osmotic Activity [MoA], Serum Albumin [Chemical/Ingredient]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-01-08</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20200527</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>ALBUMINEX 25% is a 25% albumin solution indicated for adults and children : 1 Hypovolemia (1.1), 2 Ascites (1.2), 3 Hypoalbuminemia including from burns (1.3), 4 Acute Nephrosis (1.4), 5 Acute Respiratory Distress Syndrome (ARDS) (1.5), 6 Cardiopulmonary Bypass (1.6).</IndicationAndUsage>
    <Description>ALBUMINEX 25% is a sterile, ready-for-use, clear, slightly viscous, almost colorless, yellow, amber or slightly green aqueous solution of human albumin for single dose intravenous infusion. It is prepared from the pooled plasma of US donors in FDA-licensed facilities in the US. The product also contains 130-160 mmol/L of sodium, less than 200 micrograms/L of aluminum and is stabilized with caprylate (0.08 mmol/g albumin) and acetyltryptophanate (0.08 mmol/g albumin) but does not contain any preservative. 12.5 g (50 mL) of ALBUMINEX 25% is oncotically equivalent to 250 mL plasma.25 g (100 mL) of ALBUMINEX 25% is oncotically equivalent to 500 mL plasma. The vials are closed with a synthetic rubber stopper. The stopper is not made with natural rubber latex. The viral risk from human plasma is minimized by the fractionation process and pasteurization of the albumin solution for 10 hours at 60°C (140°F) in its final container. These processes are effective for both enveloped and non-enveloped viruses. There have been no reports of virus transmission with products manufactured using this combination of processes. Typical reductions of experimental viral loads are shown in Table 1.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-7752-1</NDCCode>
    <PackageDescription>1 KIT in 1 CARTON (64208-7752-1)  *  10 mL in 1 VIAL, GLASS (64208-7754-1)  *  2.5 mL in 1 VIAL, GLASS (64208-7755-1) </PackageDescription>
    <NDC11Code>64208-7752-01</NDC11Code>
    <ProductNDC>64208-7752</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Coagadex</ProprietaryName>
    <NonProprietaryName>Coagulation Factor X Human</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20151021</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125506</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Ltd</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2026-04-25</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20151021</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>COAGADEX, Coagulation Factor X (Human), is a plasma-derived human blood coagulation Factor indicated in adults and children with hereditary Factor X deficiency for: 1 Routine prophylaxis to reduce the frequency of bleeding episodes, 2 On-demand treatment and control of bleeding episodes, 3 Perioperative management of bleeding in patients with mild, moderate, and severe hereditary Factor X deficiency.</IndicationAndUsage>
    <Description>COAGADEX is a plasma-derived, sterile, purified concentrate of human coagulation Factor X that contains sucrose as a stabilizer. It is formulated as a lyophilized powder for solution for intravenous administration. When reconstituted with Sterile Water for Injection it forms a colorless, clear or slightly pearl-like solution. COAGADEX contains nominally (approximately) 100 IU/mL of coagulation Factor X and the following inactive ingredients: chloride, phosphate, citrate, sucrose and sodium. Each vial of COAGADEX is labeled with the actual Factor X activity/content expressed in IU per vial. Factor X activity in IU is determined using an in vitro chromogenic assay and a Factor X concentrate reference standard calibrated against the current WHO International Standard for Blood Coagulation Factors II and X Concentrate. COAGADEX contains no added biological components such as heparin, albumin or anti-thrombin. The content of Factor II and Factor IX are ≤ 1 IU/mL of the reconstituted product. Factor Xa and Factor IIa were not detectable by Non-activated Partial Thromboplastin Time (NaPTT) or Fibrinogen Clotting Time (FCT) tests for potential thrombogenicity, and comprised &lt; 10 parts per million by weight when tested by more sensitive analytical methods. The specific activity of COAGADEX is typically 80-137 IU per mg protein. The product contains no preservatives. COAGADEX is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to human immunodeficiency virus (HIV)-1/2, hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) with nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), hepatitis C virus (HCV), hepatitis A virus (HAV) and human parvovirus B19. Furthermore, each manufacturing pool is tested to be negative for HBsAg and anti-HIV-1/2 antibodies. Also, manufacturing pools are non-reactive by nucleic acid test for HAV, HBV, HCV, and HIV-1. The limit for human parvovirus B19 in the manufacturing pools is set not to exceed 104 IU/mL. Three processing steps specifically designed to remove or inactivate viruses are. 1) Solvent/detergent treatment targeted to inactivate enveloped viruses. 2) A 15-nm filtration step designed to remove small viruses including non-enveloped viruses. 3) Terminal dry-heat treatment at 80°C for 72 hours in the final container to inactivate enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled-down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. Table 2 presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8234-5</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8234-5)  &gt; 50 mL in 1 BOTTLE, GLASS (64208-8234-1) </PackageDescription>
    <NDC11Code>64208-8234-05</NDC11Code>
    <ProductNDC>64208-8234</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20101101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Limited</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Deprecated</Status>
    <LastUpdate>2022-12-21</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
  </NDC>
  <NDC>
    <NDCCode>64208-8234-6</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8234-6)  / 100 mL in 1 BOTTLE, GLASS (64208-8234-2) </PackageDescription>
    <NDC11Code>64208-8234-06</NDC11Code>
    <ProductNDC>64208-8234</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20101101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Limited</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 5% is an Immune Globulin Intravenous (Human) 5% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 5% is a ready-to-use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains sorbitol, glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 5% contains approximately 5 g normal human immunoglobulin and 5 g D-sorbitol in 100 mL of buffer solution containing: 0.6 g glycine, 0.2 g sodium acetate, 0.3 g sodium chloride and about 5 mg polysorbate 80. Immunoglobulin G purity is &gt; 95%, the pH is in the range of 4.8 to 5.1, and osmolality is not less than 240 mOsmol/kg (typically 420 to 500 mOsmol/kg). The distribution of the four IgG subclasses is approximately 64% IgG1, 30% IgG2, 5% IgG3, and 1% IgG4. The content of IgA is lower than 10 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 5% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 5% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 5% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. The table below presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8234-7</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8234-7)  / 200 mL in 1 BOTTLE, GLASS (64208-8234-3) </PackageDescription>
    <NDC11Code>64208-8234-07</NDC11Code>
    <ProductNDC>64208-8234</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20101101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Limited</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 5% is an Immune Globulin Intravenous (Human) 5% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 5% is a ready-to-use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains sorbitol, glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 5% contains approximately 5 g normal human immunoglobulin and 5 g D-sorbitol in 100 mL of buffer solution containing: 0.6 g glycine, 0.2 g sodium acetate, 0.3 g sodium chloride and about 5 mg polysorbate 80. Immunoglobulin G purity is &gt; 95%, the pH is in the range of 4.8 to 5.1, and osmolality is not less than 240 mOsmol/kg (typically 420 to 500 mOsmol/kg). The distribution of the four IgG subclasses is approximately 64% IgG1, 30% IgG2, 5% IgG3, and 1% IgG4. The content of IgA is lower than 10 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 5% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 5% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 5% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. The table below presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8234-8</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8234-8)  / 400 mL in 1 BOTTLE, GLASS (64208-8234-4) </PackageDescription>
    <NDC11Code>64208-8234-08</NDC11Code>
    <ProductNDC>64208-8234</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20101101</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Limited</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/100mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-09-18</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20101101</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 5% is an Immune Globulin Intravenous (Human) 5% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 5% is a ready-to-use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains sorbitol, glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 5% contains approximately 5 g normal human immunoglobulin and 5 g D-sorbitol in 100 mL of buffer solution containing: 0.6 g glycine, 0.2 g sodium acetate, 0.3 g sodium chloride and about 5 mg polysorbate 80. Immunoglobulin G purity is &gt; 95%, the pH is in the range of 4.8 to 5.1, and osmolality is not less than 240 mOsmol/kg (typically 420 to 500 mOsmol/kg). The distribution of the four IgG subclasses is approximately 64% IgG1, 30% IgG2, 5% IgG3, and 1% IgG4. The content of IgA is lower than 10 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 5% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 5% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 5% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. The table below presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8235-5</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8235-5)  / 50 mL in 1 BOTTLE, GLASS (64208-8235-1) </PackageDescription>
    <NDC11Code>64208-8235-05</NDC11Code>
    <ProductNDC>64208-8235</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170407</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Ltd</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 10% is an Immune Globulin Intravenous (Human) 10% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) in adults (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 10% is a ready to use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 10% contains approximately 10 g normal human immunoglobulin and 200-300 mM glycine in 100 mL of buffer solution containing: &lt;30 mM acetate, &lt;30 mM sodium chloride and 1-6 mg polysorbate 80. Immunoglobulin G purity is ≥98%, the pH is in the range of 4.9 to 5.3, and osmolality is not less than 240 mOsmol/kg (typically 280 mOsmol/kg). The distribution of the four IgG subclasses reflects that of normal plasma. The content of IgA is less than 20 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 10% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 10% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 10% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. Table 5 presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8235-6</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8235-6)  / 100 mL in 1 BOTTLE, GLASS (64208-8235-2) </PackageDescription>
    <NDC11Code>64208-8235-06</NDC11Code>
    <ProductNDC>64208-8235</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170407</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Ltd</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 10% is an Immune Globulin Intravenous (Human) 10% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) in adults (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 10% is a ready to use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 10% contains approximately 10 g normal human immunoglobulin and 200-300 mM glycine in 100 mL of buffer solution containing: &lt;30 mM acetate, &lt;30 mM sodium chloride and 1-6 mg polysorbate 80. Immunoglobulin G purity is ≥98%, the pH is in the range of 4.9 to 5.3, and osmolality is not less than 240 mOsmol/kg (typically 280 mOsmol/kg). The distribution of the four IgG subclasses reflects that of normal plasma. The content of IgA is less than 20 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 10% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 10% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 10% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. Table 5 presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>64208-8235-7</NDCCode>
    <PackageDescription>1 BOTTLE, GLASS in 1 CARTON (64208-8235-7)  / 200 mL in 1 BOTTLE, GLASS (64208-8235-3) </PackageDescription>
    <NDC11Code>64208-8235-07</NDC11Code>
    <ProductNDC>64208-8235</ProductNDC>
    <ProductTypeName>PLASMA DERIVATIVE</ProductTypeName>
    <ProprietaryName>Gammaplex</ProprietaryName>
    <NonProprietaryName>Human Immunoglobulin G</NonProprietaryName>
    <DosageFormName>SOLUTION</DosageFormName>
    <RouteName>INTRAVENOUS</RouteName>
    <StartMarketingDate>20170407</StartMarketingDate>
    <MarketingCategoryName>BLA</MarketingCategoryName>
    <ApplicationNumber>BLA125329</ApplicationNumber>
    <LabelerName>Bio Products Laboratory Ltd</LabelerName>
    <SubstanceName>HUMAN IMMUNOGLOBULIN G</SubstanceName>
    <StrengthNumber>5</StrengthNumber>
    <StrengthUnit>g/50mL</StrengthUnit>
    <Pharm_Classes>Antigen Neutralization [MoA], Human Immunoglobulin G [EPC], Immunoglobulins [CS], Passively Acquired Immunity [PE]</Pharm_Classes>
    <Status>Active</Status>
    <LastUpdate>2025-11-04</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20170407</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>GAMMAPLEX 10% is an Immune Globulin Intravenous (Human) 10% Liquid indicated for the treatment of: 1 primary humoral immunodeficiency (PI) in adults and pediatric patients 2 years of age and older (1.1), 2 chronic immune thrombocytopenic purpura (ITP) in adults (1.2).</IndicationAndUsage>
    <Description>GAMMAPLEX 10% is a ready to use sterile solution of polyclonal human Immunoglobulin G for intravenous administration that contains glycine and polysorbate 80 as stabilizers. Specifically, GAMMAPLEX 10% contains approximately 10 g normal human immunoglobulin and 200-300 mM glycine in 100 mL of buffer solution containing: &lt;30 mM acetate, &lt;30 mM sodium chloride and 1-6 mg polysorbate 80. Immunoglobulin G purity is ≥98%, the pH is in the range of 4.9 to 5.3, and osmolality is not less than 240 mOsmol/kg (typically 280 mOsmol/kg). The distribution of the four IgG subclasses reflects that of normal plasma. The content of IgA is less than 20 micrograms/mL. The anti-D and anti-A/anti-B hemagglutinin content of the drug product is strictly controlled to specification. GAMMAPLEX 10% contains no reducing carbohydrate stabilizers (e.g. sucrose, maltose) and no preservative. GAMMAPLEX 10% is prepared from large pools of human plasma by a combination of cold ethanol fractionation and ion exchange chromatography. Fab functions tested include antigen binding activity, and Fc functions tested include complement activation and rubella antibody-mediated hemolysis. GAMMAPLEX 10% is manufactured from plasma, obtained from healthy US donors, who have passed viral screening tests. All donors are subjected to medical examinations, laboratory tests, and a review of their medical history before being allowed to donate blood or plasma. All plasma donations are screened for antibody to HIV-1/2 and hepatitis C virus (HCV), and hepatitis B surface antigen (HBsAg). Additional testing of donations is carried out in plasma mini-pools (512 donations per pool) that undergo nucleic acid amplification testing (NAT) for HIV, hepatitis B virus (HBV), HCV, hepatitis A virus (HAV) and parvovirus B19. Further testing is carried out on the manufacturing pools for HBsAg, and antibody to HIV-1/2; HCV and parvovirus B19 are also tested by NAT, with the limit for B19 set to not exceed 104 IU B19 DNA per mL plasma. There are three processing steps specifically designed to remove or inactivate viruses. 1) Solvent/Detergent treatment is targeted to enveloped viruses;. 2) A virus filtration step designed to remove small viruses including non-enveloped viruses, on a size exclusion basis; and. 3) The terminal low pH incubation step is identified as contributing to the overall viral clearance capacity for enveloped and non-enveloped viruses. The capacity of the manufacturing process to remove and/or inactivate enveloped and non-enveloped viruses has been validated by laboratory spiking studies on a scaled down process model. Overall virus reduction was calculated only from steps that were mechanistically independent from each other. In addition, each step was validated to provide robust virus reduction. Table 5 presents the contribution of each process step to virus reduction and the overall process reduction.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-2091-3</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (70710-2091-3)  *  4 mL in 1 VIAL, GLASS (70710-2090-1)  *  50 mL in 1 VIAL, GLASS (64208-2512-4) </PackageDescription>
    <NDC11Code>70710-2091-03</NDC11Code>
    <ProductNDC>70710-2091</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Beizray</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20250828</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218711</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250828</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BEIZRAY is a microtubule inhibitor indicated for: : 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β, 20-epoxy-1,2α,4,7β,10β,13α-hex-ahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.89. It is highly lipophilic and practically insoluble in water. BEIZRAY Injection for intravenous use is a sterile, non-pyrogenic, clear colorless liquid at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) in 0.770 grams dehydrated alcohol (100% v/v) solution, with citric acid for pH adjustment. The BEIZRAY kit also contains a single dose vial of IV Solution Stabilizer, 50 mL of 25% Albumin Human USP solution. 25% Albumin Human USP is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The product contains 0.25 g Albumin Human USP per mL and is stabilized with 0.08 mmol sodium acetyltryptophanate and 0.08 mmol sodium caprylate per gram of albumin.</Description>
  </NDC>
  <NDC>
    <NDCCode>70710-2093-4</NDCCode>
    <PackageDescription>1 KIT in 1 KIT (70710-2093-4)  *  4 mL in 1 VIAL, GLASS (70710-2090-1)  *  50 mL in 1 VIAL, GLASS (64208-2512-4)  *  4 mL in 1 VIAL, GLASS (70710-2090-1) </PackageDescription>
    <NDC11Code>70710-2093-04</NDC11Code>
    <ProductNDC>70710-2093</ProductNDC>
    <ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
    <ProprietaryName>Beizray</ProprietaryName>
    <NonProprietaryName>Docetaxel</NonProprietaryName>
    <DosageFormName>KIT</DosageFormName>
    <StartMarketingDate>20250828</StartMarketingDate>
    <MarketingCategoryName>NDA</MarketingCategoryName>
    <ApplicationNumber>NDA218711</ApplicationNumber>
    <LabelerName>Zydus Pharmaceuticals USA Inc.</LabelerName>
    <Status>Active</Status>
    <LastUpdate>2025-12-24</LastUpdate>
    <PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
    <ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
    <ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>20250828</StartMarketingDatePackage>
    <SamplePackage>N</SamplePackage>
    <IndicationAndUsage>BEIZRAY is a microtubule inhibitor indicated for: : 1 Breast Cancer (BC): single agent for locally advanced or metastatic BC after chemotherapy failure; and with doxorubicin and cyclophosphamide as adjuvant treatment of operable node-positive BC (1.1), 2 Non-small Cell Lung Cancer (NSCLC): single agent for locally advanced or metastatic NSCLC after platinum therapy failure; and with cisplatin for unresectable, locally advanced or metastatic untreated NSCLC (1.2), 3 Castration-Resistant Prostate Cancer (CRPC): with prednisone in metastatic castration-resistant prostate cancer (1.3), 4 Gastric Adenocarcinoma (GC): with cisplatin and fluorouracil for untreated, advanced GC, including the gastroesophageal junction (1.4), 5 Squamous Cell Carcinoma of the Head and Neck (SCCHN): with cisplatin and fluorouracil for induction treatment of locally advanced SCCHN (1.5).</IndicationAndUsage>
    <Description>Docetaxel is an antineoplastic agent belonging to the taxoid family. The chemical name for docetaxel is (2R,3S)-N-carboxy-3-phenylisoserine,N-tert-butyl ester, 13-ester with 5β, 20-epoxy-1,2α,4,7β,10β,13α-hex-ahydroxytax-11-en-9-one 4-acetate 2-benzoate. Docetaxel has the following structural formula. Docetaxel is a white to almost-white powder with an empirical formula of C43H53NO14, and a molecular weight of 807.89. It is highly lipophilic and practically insoluble in water. BEIZRAY Injection for intravenous use is a sterile, non-pyrogenic, clear colorless liquid at 20 mg/mL concentration. Each mL contains 20 mg docetaxel (anhydrous) in 0.770 grams dehydrated alcohol (100% v/v) solution, with citric acid for pH adjustment. The BEIZRAY kit also contains a single dose vial of IV Solution Stabilizer, 50 mL of 25% Albumin Human USP solution. 25% Albumin Human USP is a clear, slightly viscous liquid; it is almost colorless or slightly yellow or green. The product contains 0.25 g Albumin Human USP per mL and is stabilized with 0.08 mmol sodium acetyltryptophanate and 0.08 mmol sodium caprylate per gram of albumin.</Description>
  </NDC>
  <NDC>
    <NDCCode>0002-0013-03</NDCCode>
    <PackageDescription>3 mL in 1 VIAL, MULTI-DOSE (0002-0013-03) </PackageDescription>
    <NDC11Code>00002-0013-03</NDC11Code>
    <ProductNDC>0002-0013</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Insulin Human</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <StartMarketingDate>19830627</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>INSULIN HUMAN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2022-03-05</LastUpdate>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>04-DEC-09</StartMarketingDatePackage>
  </NDC>
  <NDC>
    <NDCCode>0002-0013-10</NDCCode>
    <PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (0002-0013-10) </PackageDescription>
    <NDC11Code>00002-0013-10</NDC11Code>
    <ProductNDC>0002-0013</ProductNDC>
    <ProductTypeName>DRUG FOR FURTHER PROCESSING</ProductTypeName>
    <NonProprietaryName>Insulin Human</NonProprietaryName>
    <DosageFormName>INJECTION, SOLUTION</DosageFormName>
    <StartMarketingDate>19830627</StartMarketingDate>
    <MarketingCategoryName>DRUG FOR FURTHER PROCESSING</MarketingCategoryName>
    <LabelerName>Eli Lilly and Company</LabelerName>
    <SubstanceName>INSULIN HUMAN</SubstanceName>
    <StrengthNumber>100</StrengthNumber>
    <StrengthUnit>[iU]/mL</StrengthUnit>
    <Status>Unfinished</Status>
    <LastUpdate>2022-03-05</LastUpdate>
    <ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
    <StartMarketingDatePackage>27-JUN-83</StartMarketingDatePackage>
  </NDC>
</NDCList>