{
"NDC": [
{
"NDCCode": "64679-986-03",
"PackageDescription": "25 CARTON in 1 CARTON (64679-986-03) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-03",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-01",
"PackageDescription": "1 CARTON in 1 CARTON (64679-986-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON",
"NDC11Code": "64679-0986-01",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-02",
"PackageDescription": "10 CARTON in 1 CARTON (64679-986-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-02",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-04",
"PackageDescription": "50 CARTON in 1 CARTON (64679-986-04) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-04",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "16714-986-03",
"PackageDescription": "1 TUBE in 1 CARTON (16714-986-03) / 80 g in 1 TUBE",
"NDC11Code": "16714-0986-03",
"ProductNDC": "16714-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209535",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220421",
"SamplePackage": "N",
"IndicationAndUsage": "Triamcinolone Acetonide Cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis- (oxy)]-, (11β,16α)-], with the empirical formula C24H31FO6 and molecular weight 434.50. CAS 76-25-5. The structural formula is. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water."
},
{
"NDCCode": "54340-986-03",
"PackageDescription": "1470 mL in 1 BOTTLE, PLASTIC (54340-986-03)",
"NDC11Code": "54340-0986-03",
"ProductNDC": "54340-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Complete Antibacterial Foaming Hand Wash With Lotion",
"ProprietaryNameSuffix": "Fresh Pear With Lotion",
"NonProprietaryName": "Triclosan",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090619",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "The Dial Corporation",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".46",
"StrengthUnit": "mL/1000mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "55648-986-03",
"PackageDescription": "25 CARTON in 1 CARTON (55648-986-03) > 1 VIAL, SINGLE-DOSE in 1 CARTON (55648-986-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55648-0986-03",
"ProductNDC": "55648-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20060829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "WOCKHARDT LIMITED",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "62282-986-03",
"PackageDescription": "15 mL in 1 BOTTLE, DROPPER (62282-986-03) ",
"NDC11Code": "62282-0986-03",
"ProductNDC": "62282-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naked Sundays Cabana Glow Mineral Glow Serum Drops Illuminating 40ml With Pink Algae",
"ProprietaryNameSuffix": "Spf 50",
"NonProprietaryName": "Titanium Oxide, Zinc Oxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Northwest Cosmetic Laboratories LLC, DBA Elevation Labs, Idaho",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "3.3; 14.9",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Deprecated",
"LastUpdate": "2024-05-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20240401",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin ageing caused by the sun."
},
{
"NDCCode": "63545-986-03",
"PackageDescription": "4000 PELLET in 1 BOTTLE, GLASS (63545-986-03) ",
"NDC11Code": "63545-0986-03",
"ProductNDC": "63545-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Ancylostoma Caninum",
"NonProprietaryName": "Ancylostoma Caninum",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20201214",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc.",
"SubstanceName": "ANCYLOSTOMA CANINUM",
"StrengthNumber": "6",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20201214",
"SamplePackage": "N"
},
{
"NDCCode": "65162-986-03",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (65162-986-03) ",
"NDC11Code": "65162-0986-03",
"ProductNDC": "65162-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181130",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207497",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-08-25",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181130",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures (PGTC) and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug (AED). (1.2) .",
"Description": "Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "68180-986-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (68180-986-03) ",
"NDC11Code": "68180-0986-03",
"ProductNDC": "68180-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077670",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250806",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablet USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is white to off white crystalline powder that is sparingly soluble in methanol and dimethyl formamide. Sertraline hydrochloride tablets USP for oral administration contain 28.0 mg, 56.0 mg, and 112.0 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: Ascorbic acid (in 25 mg, 50 mg and 100 mg tablets), D&C Yellow #10 (in 25 mg tablet), dibasic calcium phosphate anhydrous, FD&C Blue #1 (in 25 mg tablet), FD&C Blue #2 (in 50 mg tablet), FD&C Red #40 (in 25 mg tablet), hydroxypropyl cellulose, hypromellose, iron oxide yellow (in 100 mg tablet), magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate , titanium dioxide and vanillin. Sertraline hydrochloride tablets USP are coated with vanillin flavored film coating material. Vanillin is a flavoring agent that possess vanilla like fragrance."
},
{
"NDCCode": "68428-986-03",
"PackageDescription": "75 PELLET in 1 VIAL, GLASS (68428-986-03) ",
"NDC11Code": "68428-0986-03",
"ProductNDC": "68428-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Menyanthes Trifoliata",
"NonProprietaryName": "Menyanthes Trifoliata",
"DosageFormName": "PELLET",
"RouteName": "ORAL",
"StartMarketingDate": "20120125",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Washington Homeopathic Products",
"SubstanceName": "MENYANTHES TRIFOLIATA",
"StrengthNumber": "30",
"StrengthUnit": "[hp_C]/1",
"Status": "Deprecated",
"LastUpdate": "2022-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120125",
"SamplePackage": "N"
},
{
"NDCCode": "69842-986-03",
"PackageDescription": "1 TUBE in 1 CARTON (69842-986-03) / 30 g in 1 TUBE",
"NDC11Code": "69842-0986-03",
"ProductNDC": "69842-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Athletes Foot",
"NonProprietaryName": "Butenafine Hydrochloride",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20171117",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA205181",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "BUTENAFINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Benzylamine Antifungal [EPC], Benzylamines [CS]",
"Status": "Active",
"LastUpdate": "2025-07-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20191121",
"SamplePackage": "N",
"IndicationAndUsage": "cures most athlete's foot between the toes. Effectiveness on the bottom or sides of foot is unknown. cures most jock itch and ringworm. relieves itching, burning, cracking, and scaling which accompany these conditions."
},
{
"NDCCode": "72835-777-02",
"PackageDescription": "1 KIT in 1 CARTON (72835-777-02) * 1 TUBE in 1 CARTON (16714-986-03) / 80 g in 1 TUBE * 10 in 1 BOX",
"NDC11Code": "72835-0777-02",
"ProductNDC": "72835-777",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Dermavyx",
"NonProprietaryName": "Triamcinolone Acetonide Cream 0.1%, Transparent Dressing",
"DosageFormName": "KIT",
"StartMarketingDate": "20260505",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "V2 Pharma, LLC",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260505",
"SamplePackage": "N"
},
{
"NDCCode": "81104-986-03",
"PackageDescription": "15 mL in 1 BOTTLE, DROPPER (81104-986-03) ",
"NDC11Code": "81104-0986-03",
"ProductNDC": "81104-986",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Naked Sundays Cabana Glow Mineral Glow Serum Drops Illuminating 40ml With Pink Algae",
"ProprietaryNameSuffix": "Spf 50",
"NonProprietaryName": "Titanium Oxide, Zinc Oxide",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20230630",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "NAKED SUNDAYS PTY LTD",
"SubstanceName": "TITANIUM DIOXIDE; ZINC OXIDE",
"StrengthNumber": "3.3; 14.9",
"StrengthUnit": "g/100mL; g/100mL",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20230630",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin ageing caused by the sun."
},
{
"NDCCode": "64679-101-03",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-101-03) ",
"NDC11Code": "64679-0101-03",
"ProductNDC": "64679-101",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120515",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "64679-105-03",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-105-03) ",
"NDC11Code": "64679-0105-03",
"ProductNDC": "64679-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120515",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "64679-107-03",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-107-03) ",
"NDC11Code": "64679-0107-03",
"ProductNDC": "64679-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120515",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "64679-121-03",
"PackageDescription": "60 TABLET in 1 BOTTLE (64679-121-03) ",
"NDC11Code": "64679-0121-03",
"ProductNDC": "64679-121",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150904",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090073",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Memantine hydrochloride is an N-methyl-D-aspartate (NMDA) receptor antagonist indicated for the treatment of moderate to severe dementia of the Alzheimer's type. (1).",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: silicified microcrystalline cellulose, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, triacetin, FD&C yellow #6 and FD&C blue #2 (5 mg tablets), and hypromellose, titanium dioxide, triacetin and iron oxide black (10 mg tablets)."
},
{
"NDCCode": "64679-122-03",
"PackageDescription": "60 TABLET in 1 BOTTLE (64679-122-03) ",
"NDC11Code": "64679-0122-03",
"ProductNDC": "64679-122",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Memantine Hydrochloride",
"NonProprietaryName": "Memantine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20150904",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090073",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "MEMANTINE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Memantine hydrochloride is an N-methyl-D-aspartate (NMDA) receptor antagonist indicated for the treatment of moderate to severe dementia of the Alzheimer's type. (1).",
"Description": "Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: silicified microcrystalline cellulose, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, triacetin, FD&C yellow #6 and FD&C blue #2 (5 mg tablets), and hypromellose, titanium dioxide, triacetin and iron oxide black (10 mg tablets)."
},
{
"NDCCode": "64679-152-03",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (64679-152-03) ",
"NDC11Code": "64679-0152-03",
"ProductNDC": "64679-152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100524",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "64679-153-03",
"PackageDescription": "90 TABLET, FILM COATED in 1 BOTTLE (64679-153-03) ",
"NDC11Code": "64679-0153-03",
"ProductNDC": "64679-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100524",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "64679-154-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-154-03) ",
"NDC11Code": "64679-0154-03",
"ProductNDC": "64679-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-155-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-155-03) ",
"NDC11Code": "64679-0155-03",
"ProductNDC": "64679-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-171-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-171-03) ",
"NDC11Code": "64679-0171-03",
"ProductNDC": "64679-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-172-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-172-03) ",
"NDC11Code": "64679-0172-03",
"ProductNDC": "64679-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-174-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-174-03) ",
"NDC11Code": "64679-0174-03",
"ProductNDC": "64679-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-175-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-175-03) ",
"NDC11Code": "64679-0175-03",
"ProductNDC": "64679-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-177-03",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-177-03) ",
"NDC11Code": "64679-0177-03",
"ProductNDC": "64679-177",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-209-03",
"PackageDescription": "500 TABLET in 1 BOTTLE (64679-209-03)",
"NDC11Code": "64679-0209-03",
"ProductNDC": "64679-209",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Terbinafine Hydrochloride",
"NonProprietaryName": "Terbinafine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20080104",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077533",
"LabelerName": "Wockhardt USA, LLC",
"SubstanceName": "TERBINAFINE HYDROCHLORIDE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Allylamine [CS],Allylamine Antifungal [EPC]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Terbinafine Hydrochloride Tablets are indicated for the treatment of onychomycosis of the toenail or fingernail due to dermatophytes (tinea unguium) (see DOSAGE AND ADMINISTRATION and CLINICAL STUDIES). Prior to initiating treatment, appropriate nail specimens for laboratory testing (KOH preparation, fungal culture, or nail biopsy) should be obtained to confirm the diagnosis of onychomycosis.",
"Description": "Terbinafine Hydrochloride Tablets contain the synthetic allylamine antifungal compound terbinafine hydrochloride. Chemically, terbinafine hydrochloride is (E)-N-(6,6-dimethyl-2-hepten-4-ynyl)-N-methyl-1- naphthalenemethanamine hydrochloride. The empirical formula C21H26ClN with a molecular weight of 327.90, and the following structural formula. Terbinafine hydrochloride is a white to off-white fine crystalline powder. It is freely soluble in methanol and methylene chloride, soluble in ethanol, and slightly soluble in water. Each tablet contains:Active Ingredients: terbinafine hydrochloride (equivalent to 250 mg base)Inactive Ingredients: colloidal silicon dioxide, NF; hypromellose, USP; magnesium stearate, NF; microcrystalline cellulose, NF; sodium starch glycolate, NF."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64679-986-03</NDCCode>
<PackageDescription>25 CARTON in 1 CARTON (64679-986-03) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-03</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-01</NDCCode>
<PackageDescription>1 CARTON in 1 CARTON (64679-986-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON</PackageDescription>
<NDC11Code>64679-0986-01</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-02</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (64679-986-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-02</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-04</NDCCode>
<PackageDescription>50 CARTON in 1 CARTON (64679-986-04) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-04</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>16714-986-03</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (16714-986-03) / 80 g in 1 TUBE</PackageDescription>
<NDC11Code>16714-0986-03</NDC11Code>
<ProductNDC>16714-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209535</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Triamcinolone Acetonide Cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis- (oxy)]-, (11β,16α)-], with the empirical formula C24H31FO6 and molecular weight 434.50. CAS 76-25-5. The structural formula is. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.</Description>
</NDC>
<NDC>
<NDCCode>54340-986-03</NDCCode>
<PackageDescription>1470 mL in 1 BOTTLE, PLASTIC (54340-986-03)</PackageDescription>
<NDC11Code>54340-0986-03</NDC11Code>
<ProductNDC>54340-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Complete Antibacterial Foaming Hand Wash With Lotion</ProprietaryName>
<ProprietaryNameSuffix>Fresh Pear With Lotion</ProprietaryNameSuffix>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090619</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>The Dial Corporation</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.46</StrengthNumber>
<StrengthUnit>mL/1000mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>55648-986-03</NDCCode>
<PackageDescription>25 CARTON in 1 CARTON (55648-986-03) > 1 VIAL, SINGLE-DOSE in 1 CARTON (55648-986-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55648-0986-03</NDC11Code>
<ProductNDC>55648-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20060829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>WOCKHARDT LIMITED</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62282-986-03</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE, DROPPER (62282-986-03) </PackageDescription>
<NDC11Code>62282-0986-03</NDC11Code>
<ProductNDC>62282-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naked Sundays Cabana Glow Mineral Glow Serum Drops Illuminating 40ml With Pink Algae</ProprietaryName>
<ProprietaryNameSuffix>Spf 50</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Oxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Northwest Cosmetic Laboratories LLC, DBA Elevation Labs, Idaho</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>3.3; 14.9</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-05-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240401</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin ageing caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>63545-986-03</NDCCode>
<PackageDescription>4000 PELLET in 1 BOTTLE, GLASS (63545-986-03) </PackageDescription>
<NDC11Code>63545-0986-03</NDC11Code>
<ProductNDC>63545-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Ancylostoma Caninum</ProprietaryName>
<NonProprietaryName>Ancylostoma Caninum</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20201214</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc.</LabelerName>
<SubstanceName>ANCYLOSTOMA CANINUM</SubstanceName>
<StrengthNumber>6</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20201214</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65162-986-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (65162-986-03) </PackageDescription>
<NDC11Code>65162-0986-03</NDC11Code>
<ProductNDC>65162-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181130</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207497</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Dihydrofolate Reductase Inhibitors [MoA], Mood Stabilizer [EPC], Organic Cation Transporter 2 Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-08-25</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181130</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablets are indicated for: : 1 adjunctive therapy for primary generalized tonic-clonic seizures (PGTC) and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. (1.1), 2 conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single antiepileptic drug (AED). (1.2) .</IndicationAndUsage>
<Description>Lamotrigine, USP, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)-as-triazine, its molecular formula is C9H7N5Cl2, and its molecular weight is 256.09. Lamotrigine USP, is a white to pale cream-colored powder and has a pKa of 5.7. Lamotrigine USP, is very slightly soluble in water (0.17 mg/mL at 25°C) and slightly soluble in 0.1 M HCl (4.1 mg/mL at 25°C). The structural formula is:. Lamotrigine extended-release tablets USP, are supplied for oral administration as 25 mg (yellow), 50 mg (green), 100 mg (beige), 200 mg (blue), 250 mg (purple) and 300 mg (gray) tablets. Each tablet contains the labeled amount of lamotrigine, USP and the following inactive ingredients: colloidal silicon dioxide, hypromellose, lactose monohydrate, macrogol, magnesium stearate, methacrylic acid copolymer dispersion, polyvinyl alcohol, talc, titanium dioxide and triethyl citrate. The 25 mg tablets also contain D&C Yellow No. 10 and FD&C Yellow No. 6. The 50 mg tablets also contain FD&C Blue No. 2 and iron oxide yellow. The 100 mg tablets also contain iron oxide red and iron oxide yellow. The 200 mg tablets also contain FD&C Blue No. 2. The 250 mg tablets also contain FD&C Blue No. 2 and FD&C Red No. 40. The 300 mg tablets also contain black iron oxide. Lamotrigine extended-release tablets, USP contain a modified-release eroding formulation as the core. The core tablets are coated with an enteric coat and have pore forming ingredient in the coat to enable a controlled release of the drug in the acidic environment of the stomach. The combinations of the modified-release core and the enteric coat are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>68180-986-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (68180-986-03) </PackageDescription>
<NDC11Code>68180-0986-03</NDC11Code>
<ProductNDC>68180-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077670</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablet USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is white to off white crystalline powder that is sparingly soluble in methanol and dimethyl formamide. Sertraline hydrochloride tablets USP for oral administration contain 28.0 mg, 56.0 mg, and 112.0 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: Ascorbic acid (in 25 mg, 50 mg and 100 mg tablets), D&C Yellow #10 (in 25 mg tablet), dibasic calcium phosphate anhydrous, FD&C Blue #1 (in 25 mg tablet), FD&C Blue #2 (in 50 mg tablet), FD&C Red #40 (in 25 mg tablet), hydroxypropyl cellulose, hypromellose, iron oxide yellow (in 100 mg tablet), magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate , titanium dioxide and vanillin. Sertraline hydrochloride tablets USP are coated with vanillin flavored film coating material. Vanillin is a flavoring agent that possess vanilla like fragrance.</Description>
</NDC>
<NDC>
<NDCCode>68428-986-03</NDCCode>
<PackageDescription>75 PELLET in 1 VIAL, GLASS (68428-986-03) </PackageDescription>
<NDC11Code>68428-0986-03</NDC11Code>
<ProductNDC>68428-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Menyanthes Trifoliata</ProprietaryName>
<NonProprietaryName>Menyanthes Trifoliata</NonProprietaryName>
<DosageFormName>PELLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120125</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Washington Homeopathic Products</LabelerName>
<SubstanceName>MENYANTHES TRIFOLIATA</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>[hp_C]/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120125</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>69842-986-03</NDCCode>
<PackageDescription>1 TUBE in 1 CARTON (69842-986-03) / 30 g in 1 TUBE</PackageDescription>
<NDC11Code>69842-0986-03</NDC11Code>
<ProductNDC>69842-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Athletes Foot</ProprietaryName>
<NonProprietaryName>Butenafine Hydrochloride</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20171117</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA205181</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>BUTENAFINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Benzylamine Antifungal [EPC], Benzylamines [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20191121</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>cures most athlete's foot between the toes. Effectiveness on the bottom or sides of foot is unknown. cures most jock itch and ringworm. relieves itching, burning, cracking, and scaling which accompany these conditions.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>72835-777-02</NDCCode>
<PackageDescription>1 KIT in 1 CARTON (72835-777-02) * 1 TUBE in 1 CARTON (16714-986-03) / 80 g in 1 TUBE * 10 in 1 BOX</PackageDescription>
<NDC11Code>72835-0777-02</NDC11Code>
<ProductNDC>72835-777</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Dermavyx</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide Cream 0.1%, Transparent Dressing</NonProprietaryName>
<DosageFormName>KIT</DosageFormName>
<StartMarketingDate>20260505</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>V2 Pharma, LLC</LabelerName>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260505</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>81104-986-03</NDCCode>
<PackageDescription>15 mL in 1 BOTTLE, DROPPER (81104-986-03) </PackageDescription>
<NDC11Code>81104-0986-03</NDC11Code>
<ProductNDC>81104-986</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Naked Sundays Cabana Glow Mineral Glow Serum Drops Illuminating 40ml With Pink Algae</ProprietaryName>
<ProprietaryNameSuffix>Spf 50</ProprietaryNameSuffix>
<NonProprietaryName>Titanium Oxide, Zinc Oxide</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20230630</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>NAKED SUNDAYS PTY LTD</LabelerName>
<SubstanceName>TITANIUM DIOXIDE; ZINC OXIDE</SubstanceName>
<StrengthNumber>3.3; 14.9</StrengthNumber>
<StrengthUnit>g/100mL; g/100mL</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230630</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: Helps prevent sunburn. If used as directed with other sun protection measures (see directions), decreases the risk of skin cancer and early skin ageing caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>64679-101-03</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-101-03) </PackageDescription>
<NDC11Code>64679-0101-03</NDC11Code>
<ProductNDC>64679-101</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-105-03</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-105-03) </PackageDescription>
<NDC11Code>64679-0105-03</NDC11Code>
<ProductNDC>64679-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-107-03</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-107-03) </PackageDescription>
<NDC11Code>64679-0107-03</NDC11Code>
<ProductNDC>64679-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-121-03</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (64679-121-03) </PackageDescription>
<NDC11Code>64679-0121-03</NDC11Code>
<ProductNDC>64679-121</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150904</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090073</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Memantine hydrochloride is an N-methyl-D-aspartate (NMDA) receptor antagonist indicated for the treatment of moderate to severe dementia of the Alzheimer's type. (1).</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: silicified microcrystalline cellulose, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, triacetin, FD&C yellow #6 and FD&C blue #2 (5 mg tablets), and hypromellose, titanium dioxide, triacetin and iron oxide black (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>64679-122-03</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (64679-122-03) </PackageDescription>
<NDC11Code>64679-0122-03</NDC11Code>
<ProductNDC>64679-122</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Memantine Hydrochloride</ProprietaryName>
<NonProprietaryName>Memantine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20150904</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090073</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>MEMANTINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>NMDA Receptor Antagonists [MoA],N-methyl-D-aspartate Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Memantine hydrochloride is an N-methyl-D-aspartate (NMDA) receptor antagonist indicated for the treatment of moderate to severe dementia of the Alzheimer's type. (1).</IndicationAndUsage>
<Description>Memantine hydrochloride is an orally active NMDA receptor antagonist. The chemical name for memantine hydrochloride is 1-amino-3,5-dimethyladamantane hydrochloride with the following structural formula. The molecular formula is C12H21NHCl and the molecular weight is 215.76. Memantine HCl occurs as a fine white to off-white powder and is soluble in water. Memantine hydrochloride is available for oral administration as capsule-shaped, film-coated tablets containing 5 mg and 10 mg of memantine hydrochloride, USP. The tablets also contain the following inactive ingredients: silicified microcrystalline cellulose, colloidal silicon dioxide, talc, croscarmellose sodium, and magnesium stearate. In addition the following inactive ingredients are also present as components of the film coat: hypromellose, titanium dioxide, triacetin, FD&C yellow #6 and FD&C blue #2 (5 mg tablets), and hypromellose, titanium dioxide, triacetin and iron oxide black (10 mg tablets).</Description>
</NDC>
<NDC>
<NDCCode>64679-152-03</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (64679-152-03) </PackageDescription>
<NDC11Code>64679-0152-03</NDC11Code>
<ProductNDC>64679-152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>64679-153-03</NDCCode>
<PackageDescription>90 TABLET, FILM COATED in 1 BOTTLE (64679-153-03) </PackageDescription>
<NDC11Code>64679-0153-03</NDC11Code>
<ProductNDC>64679-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>64679-154-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-154-03) </PackageDescription>
<NDC11Code>64679-0154-03</NDC11Code>
<ProductNDC>64679-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-155-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-155-03) </PackageDescription>
<NDC11Code>64679-0155-03</NDC11Code>
<ProductNDC>64679-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-171-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-171-03) </PackageDescription>
<NDC11Code>64679-0171-03</NDC11Code>
<ProductNDC>64679-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-172-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-172-03) </PackageDescription>
<NDC11Code>64679-0172-03</NDC11Code>
<ProductNDC>64679-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-174-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-174-03) </PackageDescription>
<NDC11Code>64679-0174-03</NDC11Code>
<ProductNDC>64679-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-175-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-175-03) </PackageDescription>
<NDC11Code>64679-0175-03</NDC11Code>
<ProductNDC>64679-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-177-03</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-177-03) </PackageDescription>
<NDC11Code>64679-0177-03</NDC11Code>
<ProductNDC>64679-177</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-209-03</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (64679-209-03)</PackageDescription>
<NDC11Code>64679-0209-03</NDC11Code>
<ProductNDC>64679-209</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Terbinafine Hydrochloride</ProprietaryName>
<NonProprietaryName>Terbinafine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080104</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077533</ApplicationNumber>
<LabelerName>Wockhardt USA, LLC</LabelerName>
<SubstanceName>TERBINAFINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Allylamine [CS],Allylamine Antifungal [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Terbinafine Hydrochloride Tablets are indicated for the treatment of onychomycosis of the toenail or fingernail due to dermatophytes (tinea unguium) (see DOSAGE AND ADMINISTRATION and CLINICAL STUDIES). Prior to initiating treatment, appropriate nail specimens for laboratory testing (KOH preparation, fungal culture, or nail biopsy) should be obtained to confirm the diagnosis of onychomycosis.</IndicationAndUsage>
<Description>Terbinafine Hydrochloride Tablets contain the synthetic allylamine antifungal compound terbinafine hydrochloride. Chemically, terbinafine hydrochloride is (E)-N-(6,6-dimethyl-2-hepten-4-ynyl)-N-methyl-1- naphthalenemethanamine hydrochloride. The empirical formula C21H26ClN with a molecular weight of 327.90, and the following structural formula. Terbinafine hydrochloride is a white to off-white fine crystalline powder. It is freely soluble in methanol and methylene chloride, soluble in ethanol, and slightly soluble in water. Each tablet contains:Active Ingredients: terbinafine hydrochloride (equivalent to 250 mg base)Inactive Ingredients: colloidal silicon dioxide, NF; hypromellose, USP; magnesium stearate, NF; microcrystalline cellulose, NF; sodium starch glycolate, NF.</Description>
</NDC>
</NDCList>