{
"NDC": [
{
"NDCCode": "64679-986-04",
"PackageDescription": "50 CARTON in 1 CARTON (64679-986-04) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-04",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-01",
"PackageDescription": "1 CARTON in 1 CARTON (64679-986-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON",
"NDC11Code": "64679-0986-01",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-02",
"PackageDescription": "10 CARTON in 1 CARTON (64679-986-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-02",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "64679-986-03",
"PackageDescription": "25 CARTON in 1 CARTON (64679-986-03) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) ",
"NDC11Code": "64679-0986-03",
"ProductNDC": "64679-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20080829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2021-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20080829",
"SamplePackage": "N",
"IndicationAndUsage": "Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.",
"Description": "Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime."
},
{
"NDCCode": "16714-986-04",
"PackageDescription": "454 g in 1 JAR (16714-986-04) ",
"NDC11Code": "16714-0986-04",
"ProductNDC": "16714-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Triamcinolone Acetonide",
"NonProprietaryName": "Triamcinolone Acetonide",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20220421",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA209535",
"LabelerName": "NorthStar RxLLC",
"SubstanceName": "TRIAMCINOLONE ACETONIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/g",
"Pharm_Classes": "Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]",
"Status": "Active",
"LastUpdate": "2024-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220421",
"SamplePackage": "N",
"IndicationAndUsage": "Triamcinolone Acetonide Cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.",
"Description": "The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis- (oxy)]-, (11β,16α)-], with the empirical formula C24H31FO6 and molecular weight 434.50. CAS 76-25-5. The structural formula is. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water."
},
{
"NDCCode": "43547-986-04",
"PackageDescription": "4 BOTTLE in 1 CARTON (43547-986-04) / 25 TABLET in 1 BOTTLE",
"NDC11Code": "43547-0986-04",
"ProductNDC": "43547-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitroglycerin",
"NonProprietaryName": "Nitroglycerin",
"DosageFormName": "TABLET",
"RouteName": "SUBLINGUAL",
"StartMarketingDate": "20250601",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA218583",
"LabelerName": "Solco Healthcare U.S., LLC",
"SubstanceName": "NITROGLYCERIN",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2025-10-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250601",
"SamplePackage": "N",
"IndicationAndUsage": "Nitroglycerin Sublingual Tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.",
"Description": "Nitroglycerin Sublingual Tablets are stabilized sublingual compressed nitroglycerin tablets that contain 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and colloidal silicon dioxide, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. C3H5N3O9. Molecular weight: 227.09."
},
{
"NDCCode": "55648-986-04",
"PackageDescription": "50 CARTON in 1 CARTON (55648-986-04) > 1 VIAL, SINGLE-DOSE in 1 CARTON (55648-986-01) > 10 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "55648-0986-04",
"ProductNDC": "55648-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefotaxime",
"NonProprietaryName": "Cefotaxime",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAMUSCULAR; INTRAVENOUS",
"StartMarketingDate": "20060829",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065197",
"LabelerName": "WOCKHARDT LIMITED",
"SubstanceName": "CEFOTAXIME SODIUM",
"StrengthNumber": "1",
"StrengthUnit": "g/mL",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC],Cephalosporins [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "65862-986-80",
"PackageDescription": "80 BLISTER PACK in 1 CARTON (65862-986-80) > 4 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (65862-986-04) ",
"NDC11Code": "65862-0986-80",
"ProductNDC": "65862-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Potassium Chloride",
"NonProprietaryName": "Potassium Chloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20181219",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA210921",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "POTASSIUM CHLORIDE",
"StrengthNumber": "600",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]",
"Status": "Active",
"LastUpdate": "2021-05-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20181219",
"SamplePackage": "N",
"IndicationAndUsage": "Potassium chloride extended-release tablets are indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.",
"Description": "Potassium chloride extended-release tablets USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium chloride extended-release tablets USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, crystalline powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and practically insoluble in ethanol. Inactive Ingredients: Colloidal silicon dioxide, hydrogenated vegetable oil, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. In addition, the 8 mEq tablets contain iron oxide red. FDA approved acceptance criteria for assay differs from USP test. Meets USP Dissolution Test 5."
},
{
"NDCCode": "68180-986-04",
"PackageDescription": "5000 TABLET, FILM COATED in 1 BOTTLE (68180-986-04) ",
"NDC11Code": "68180-0986-04",
"ProductNDC": "68180-986",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20250806",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA077670",
"LabelerName": "Lupin Pharmaceuticals, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2026-02-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250806",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablet USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is white to off white crystalline powder that is sparingly soluble in methanol and dimethyl formamide. Sertraline hydrochloride tablets USP for oral administration contain 28.0 mg, 56.0 mg, and 112.0 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: Ascorbic acid (in 25 mg, 50 mg and 100 mg tablets), D&C Yellow #10 (in 25 mg tablet), dibasic calcium phosphate anhydrous, FD&C Blue #1 (in 25 mg tablet), FD&C Blue #2 (in 50 mg tablet), FD&C Red #40 (in 25 mg tablet), hydroxypropyl cellulose, hypromellose, iron oxide yellow (in 100 mg tablet), magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate , titanium dioxide and vanillin. Sertraline hydrochloride tablets USP are coated with vanillin flavored film coating material. Vanillin is a flavoring agent that possess vanilla like fragrance."
},
{
"NDCCode": "64679-105-04",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-105-04) ",
"NDC11Code": "64679-0105-04",
"ProductNDC": "64679-105",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "150",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120515",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "64679-107-04",
"PackageDescription": "500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-107-04) ",
"NDC11Code": "64679-0107-04",
"ProductNDC": "64679-107",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Bupropion Hydrochloride",
"ProprietaryNameSuffix": "(sr)",
"NonProprietaryName": "Bupropion Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120515",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201331",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "BUPROPION HYDROCHLORIDE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20120515",
"SamplePackage": "N",
"IndicationAndUsage": "Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .",
"Description": "Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2."
},
{
"NDCCode": "64679-152-04",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-152-04) ",
"NDC11Code": "64679-0152-04",
"ProductNDC": "64679-152",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100524",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "64679-153-04",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-153-04) ",
"NDC11Code": "64679-0153-04",
"ProductNDC": "64679-153",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Valacyclovir Hydrochloride",
"NonProprietaryName": "Valacyclovir Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100524",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090216",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "VALACYCLOVIR HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "g/1",
"Pharm_Classes": "DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20100524",
"SamplePackage": "N",
"IndicationAndUsage": "Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.",
"Description": "Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43."
},
{
"NDCCode": "64679-154-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-154-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0154-04",
"ProductNDC": "64679-154",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-155-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-155-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0155-04",
"ProductNDC": "64679-155",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-171-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-171-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0171-04",
"ProductNDC": "64679-171",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-172-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-172-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0172-04",
"ProductNDC": "64679-172",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-174-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-174-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0174-04",
"ProductNDC": "64679-174",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-175-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-175-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0175-04",
"ProductNDC": "64679-175",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-177-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-177-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0177-04",
"ProductNDC": "64679-177",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ropinirole Hydrochloride",
"NonProprietaryName": "Ropinirole Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080529",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079050",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "ROPINIROLE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).",
"Description": "Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2."
},
{
"NDCCode": "64679-215-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-215-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK",
"NDC11Code": "64679-0215-04",
"ProductNDC": "64679-215",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201948",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "50; .2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "64679-217-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-217-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK",
"NDC11Code": "64679-0217-04",
"ProductNDC": "64679-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201948",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "75; .2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "64679-271-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-271-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-271-03) ",
"NDC11Code": "64679-0271-04",
"ProductNDC": "64679-271",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202498",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels."
},
{
"NDCCode": "64679-272-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-272-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-272-03) ",
"NDC11Code": "64679-0272-04",
"ProductNDC": "64679-272",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202498",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "200",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels."
},
{
"NDCCode": "64679-273-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-273-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-273-03) ",
"NDC11Code": "64679-0273-04",
"ProductNDC": "64679-273",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202498",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels."
},
{
"NDCCode": "64679-274-03",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-274-03) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-274-04) ",
"NDC11Code": "64679-0274-03",
"ProductNDC": "64679-274",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202498",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels."
},
{
"NDCCode": "64679-275-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-275-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-275-03) ",
"NDC11Code": "64679-0275-04",
"ProductNDC": "64679-275",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lamotrigine",
"NonProprietaryName": "Lamotrigine",
"DosageFormName": "TABLET, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20121129",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202498",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "LAMOTRIGINE",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-01-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20121129",
"SamplePackage": "N",
"IndicationAndUsage": "Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .",
"Description": "Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels."
},
{
"NDCCode": "64679-311-04",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-311-04) ",
"NDC11Code": "64679-0311-04",
"ProductNDC": "64679-311",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091267",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110528",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent."
},
{
"NDCCode": "64679-312-04",
"PackageDescription": "500 TABLET, FILM COATED in 1 BOTTLE (64679-312-04) ",
"NDC11Code": "64679-0312-04",
"ProductNDC": "64679-312",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Donepezil Hydrochloride",
"NonProprietaryName": "Donepezil Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20110528",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA091267",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "DONEPEZIL HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20110528",
"SamplePackage": "N",
"IndicationAndUsage": "Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).",
"Description": "Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent."
},
{
"NDCCode": "64679-314-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (64679-314-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "64679-0314-04",
"ProductNDC": "64679-314",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clopidogrel",
"NonProprietaryName": "Clopidogrel",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20120814",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202266",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "CLOPIDOGREL BISULFATE",
"StrengthNumber": "75",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20120814",
"SamplePackage": "N",
"IndicationAndUsage": "Clopidogrel is a P2Y12 platelet inhibitor indicated for: : 1 Acute coronary syndrome.",
"Description": "Clopidogrel bisulfate is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H) acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP is a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablet, USP for oral administration is provided as either pink, round, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate, USP which is the molar equivalent of 75 mg of clopidogrel base or pink, modified capsule shaped, debossed film-coated tablets containing 391.5 mg of clopidogrel bisulfate which is the molar equivalent of 300 mg of clopidogrel base. Each tablet contains glyceryl behenate, hydrogenated castor oil, hydroxypropylcellulose, mannitol, microcrystalline cellulose and polyethylene glycol 6000 as inactive ingredients. The pink film coating contains iron oxide red, hypromellose 2910, lactose monohydrate, titanium dioxide and triacetin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64679-986-04</NDCCode>
<PackageDescription>50 CARTON in 1 CARTON (64679-986-04) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-04</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-01</NDCCode>
<PackageDescription>1 CARTON in 1 CARTON (64679-986-01) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON</PackageDescription>
<NDC11Code>64679-0986-01</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-02</NDCCode>
<PackageDescription>10 CARTON in 1 CARTON (64679-986-02) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-02</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>64679-986-03</NDCCode>
<PackageDescription>25 CARTON in 1 CARTON (64679-986-03) > 1 INJECTION, POWDER, FOR SOLUTION in 1 CARTON (64679-986-01) </PackageDescription>
<NDC11Code>64679-0986-03</NDC11Code>
<ProductNDC>64679-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20080829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20080829</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Treatment. Cefotaxime for injection, USP is indicated for the treatment of patients with serious infections caused by susceptible strains of the designated microorganisms in the diseases listed below. (1) Lower respiratory tract infections, including pneumonia, caused by Streptococcus pneumoniae (formerly Diplococcus pneumoniae), Streptococcus pyogenes* (Group A streptococci) and other streptococci (excluding enterococci, e.g., Enterococcus faecalis), Staphylococcus aureus (penicillinase and non-penicillinase producing), Escherichia coli, Klebsiella species, Haemophilus influenzae (including ampicillin resistant strains), Haemophilus parainfluenzae, Proteus mirabilis, Serratia marcescens*, Enterobacter species, indole positive Proteus and Pseudomonas species (including P. aeruginosa). (2) Genitourinary infections. Urinary tract infections caused by Enterococcus species, Staphylococcus epidermidis, Staphylococcus aureus*, (penicillinase and non-penicillinase producing), Citrobacter species, Enterobacter species, Escherichia coli, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Providencia stuartii, Morganella morganii*, Providencia rettgeri*, Serratia marcescens and Pseudomonas species (including P. aeruginosa). Also, uncomplicated gonorrhea (cervical/urethral and rectal) caused by Neisseria gonorrhoeae, including penicillinase producing strains. (3) Gynecologic infections, including pelvic inflammatory disease, endometritis and pelvic cellulitis caused by Staphylococcus epidermidis, Streptococcus species, Enterococcus species, Enterobacter species*, Klebsiella species*, Escherichia coli, Proteus mirabilis, Bacteroides species (including Bacteroides fragilis*), Clostridium species, and anaerobic cocci (including Peptostreptococcus species and Peptococcus species) and Fusobacterium species (including F. nucleatum*). Cefotaxime for injection, USP, like other cephalosporins, has no activity against Chlamydia trachomatis. Therefore, when cephalosporins are used in the treatment of patients with pelvic inflammatory disease and C. trachomatis is one of the suspected pathogens, appropriate anti-chlamydial coverage should be added. (4) Bacteremia/Septicemia caused by Escherichia coli, Klebsiella species, and Serratia marcescens, Staphylococcus aureus and Streptococcus species (including S. pneumonia). (5) Skin and skin structure infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing), Staphylococcus epidermidis, Streptococcus pyogenes (Group A streptococci) and other streptococci, Enterococcus species, Acinetobacter species*, Escherichia coli, Citrobacter species (including C. freundii*), Enterobacter species, Klebsiella species, Proteus mirabilis, Proteus vulgaris*, Morganella morganii, Providencia rettgeri*, Pseudomonas species, Serratia marcescens, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus species). (6) Intra-abdominal infections including peritonitis caused by Streptococcus species*, Escherichia coli, Klebsiella species, Bacteroides species, and anaerobic cocci (including Peptostreptococcus* species and Peptococcus* species) Proteus mirabilis*, and Clostridium species*. (7) Bone and/or joint infections caused by Staphylococcus aureus (penicillinase and non-penicillinase producing strains), Streptococcus species (including S. pyogenes*), Pseudomonas species (including P. aeruginosa*), and Proteus mirabilis*. (8) Central nervous system infections, e.g., meningitis and ventriculitis, caused by Neisseria meningitidis, Haemophilus influenzae, Streptococcus pneumoniae, Klebsiella pneumoniae* and Escherichia coli*. (*) Efficacy for this organism, in this organ system, has been studied in fewer than 10 infections. Although many strains of enterococci (e.g., S. faecalis) and Pseudomonas species are resistant to cefotaxime sodium in vitro, cefotaxime for injection, USP has been used successfully in treating patients with infections caused by susceptible organisms. Specimens for bacteriologic culture should be obtained prior to therapy in order to isolate and identify causative organisms and to determine their susceptibilities to cefotaxime for injection, USP. Therapy may be instituted before results of susceptibility studies are known; however, once these results become available, the antibiotic treatment should be adjusted accordingly. In certain cases of confirmed or suspected gram-positive or gram-negative sepsis or in patients with other serious infections in which the causative organism has not been identified, cefotaxime for injection, USP may be used concomitantly with an aminoglycoside. The dosage recommended in the labeling of both antibiotics may be given and depends on the severity of the infection and the patient's condition. Renal function should be carefully monitored, especially if higher dosages of the aminoglycosides are to be administered or if therapy is prolonged, because of the potential nephrotoxicity and ototoxicity of aminoglycoside antibiotics. It is possible that nephrotoxicity may be potentiated if cefotaxime for injection, USP is used concomitantly with an aminoglycoside.</IndicationAndUsage>
<Description>Cefotaxime for injection, USP is a semisynthetic, broad spectrum cephalosporin antibiotic for parenteral administration. It is the sodium salt of 7-[2-(2-amino-4-thiazolyl) glyoxylamido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo [4.2.0] oct-2-ene-2-carboxylate 72 (Z)-(o-methyloxime), acetate (ester). Cefotaxime for injection, USP contains approximately 50.5 mg (2.2 mEq) of sodium per gram of cefotaxime activity. Solutions of cefotaxime for injection, USP range from very pale yellow to light amber depending on the concentration and the diluent used. The pH of the injectable solutions usually ranges from 5.0 to 7.5. The CAS Registry Number is 64485-93-4. The molecular formula is C16H16N5NaO7S2 and the molecular weight is 477.45. Cefotaxime for injection, USP is supplied as a dry powder in conventional vials. Each vial contains cefotaxime sodium equivalent to 500 mg, 1 g or 2 g of cefotaxime.</Description>
</NDC>
<NDC>
<NDCCode>16714-986-04</NDCCode>
<PackageDescription>454 g in 1 JAR (16714-986-04) </PackageDescription>
<NDC11Code>16714-0986-04</NDC11Code>
<ProductNDC>16714-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Triamcinolone Acetonide</ProprietaryName>
<NonProprietaryName>Triamcinolone Acetonide</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20220421</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA209535</ApplicationNumber>
<LabelerName>NorthStar RxLLC</LabelerName>
<SubstanceName>TRIAMCINOLONE ACETONIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Pharm_Classes>Corticosteroid Hormone Receptor Agonists [MoA], Corticosteroid [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220421</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Triamcinolone Acetonide Cream is indicated for the relief of the inflammatory and pruritic manifestations of corticosteroid-responsive dermatoses.</IndicationAndUsage>
<Description>The topical corticosteroids constitute a class of primarily synthetic steroids used as anti-inflammatory and anti-pruritic agents. The steroids in this class include triamcinolone acetonide. Triamcinolone Acetonide Cream USP contains Triamcinolone Acetonide [Pregna-1,4-diene-3,20-dione,9-fluoro-11,21-dihydroxy-16,17-[(1-methylethylidene) bis- (oxy)]-, (11β,16α)-], with the empirical formula C24H31FO6 and molecular weight 434.50. CAS 76-25-5. The structural formula is. Triamcinolone Acetonide Cream USP, 0.025% contains: 0.25 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.1% contains: 1 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.Triamcinolone Acetonide Cream USP, 0.5% contains: 5 mg of Triamcinolone Acetonide, USP per gram in a base containing Emulsifying Wax, Cetyl Alcohol, Isopropyl Palmitate, Sorbitol Solution, Glycerin, Lactic Acid, Benzyl Alcohol and Purified Water.</Description>
</NDC>
<NDC>
<NDCCode>43547-986-04</NDCCode>
<PackageDescription>4 BOTTLE in 1 CARTON (43547-986-04) / 25 TABLET in 1 BOTTLE</PackageDescription>
<NDC11Code>43547-0986-04</NDC11Code>
<ProductNDC>43547-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitroglycerin</ProprietaryName>
<NonProprietaryName>Nitroglycerin</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>SUBLINGUAL</RouteName>
<StartMarketingDate>20250601</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA218583</ApplicationNumber>
<LabelerName>Solco Healthcare U.S., LLC</LabelerName>
<SubstanceName>NITROGLYCERIN</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Nitrate Vasodilator [EPC], Nitrates [CS], Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Nitroglycerin Sublingual Tablets are indicated for the acute relief of an attack or acute prophylaxis of angina pectoris due to coronary artery disease.</IndicationAndUsage>
<Description>Nitroglycerin Sublingual Tablets are stabilized sublingual compressed nitroglycerin tablets that contain 0.3 mg, 0.4 mg, or 0.6 mg nitroglycerin; as well as lactose monohydrate, NF; glyceryl monostearate, NF; pregelatinized starch, NF; calcium stearate, NF powder; and colloidal silicon dioxide, NF. Nitroglycerin, an organic nitrate, is a vasodilating agent. The chemical name for nitroglycerin is 1, 2, 3 propanetriol trinitrate and the chemical structure is. C3H5N3O9. Molecular weight: 227.09.</Description>
</NDC>
<NDC>
<NDCCode>55648-986-04</NDCCode>
<PackageDescription>50 CARTON in 1 CARTON (55648-986-04) > 1 VIAL, SINGLE-DOSE in 1 CARTON (55648-986-01) > 10 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>55648-0986-04</NDC11Code>
<ProductNDC>55648-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefotaxime</ProprietaryName>
<NonProprietaryName>Cefotaxime</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR; INTRAVENOUS</RouteName>
<StartMarketingDate>20060829</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065197</ApplicationNumber>
<LabelerName>WOCKHARDT LIMITED</LabelerName>
<SubstanceName>CEFOTAXIME SODIUM</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/mL</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC],Cephalosporins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>65862-986-80</NDCCode>
<PackageDescription>80 BLISTER PACK in 1 CARTON (65862-986-80) > 4 TABLET, FILM COATED, EXTENDED RELEASE in 1 BLISTER PACK (65862-986-04) </PackageDescription>
<NDC11Code>65862-0986-80</NDC11Code>
<ProductNDC>65862-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Potassium Chloride</ProprietaryName>
<NonProprietaryName>Potassium Chloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20181219</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA210921</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>POTASSIUM CHLORIDE</SubstanceName>
<StrengthNumber>600</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC], Potassium Compounds [CS], Potassium Salt [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2021-05-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181219</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Potassium chloride extended-release tablets are indicated for the treatment and prophylaxis of hypokalemia with or without metabolic alkalosis, in patients for whom dietary management with potassium-rich foods or diuretic dose reduction is insufficient.</IndicationAndUsage>
<Description>Potassium chloride extended-release tablets USP are a solid oral dosage form of potassium chloride. Each contains 600 mg or 750 mg of potassium chloride equivalent to 8 mEq or 10 mEq of potassium in a wax matrix tablet. Potassium chloride extended-release tablets USP are an electrolyte replenisher. The chemical name is potassium chloride, and the structural formula is KCl. Potassium chloride, USP is a white, crystalline powder or colorless crystals. It is odorless and has a saline taste. Its solutions are neutral to litmus. It is freely soluble in water and practically insoluble in ethanol. Inactive Ingredients: Colloidal silicon dioxide, hydrogenated vegetable oil, magnesium stearate, polyethylene glycol, polyvinyl alcohol, talc and titanium dioxide. In addition, the 8 mEq tablets contain iron oxide red. FDA approved acceptance criteria for assay differs from USP test. Meets USP Dissolution Test 5.</Description>
</NDC>
<NDC>
<NDCCode>68180-986-04</NDCCode>
<PackageDescription>5000 TABLET, FILM COATED in 1 BOTTLE (68180-986-04) </PackageDescription>
<NDC11Code>68180-0986-04</NDC11Code>
<ProductNDC>68180-986</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250806</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA077670</ApplicationNumber>
<LabelerName>Lupin Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250806</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)]: 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablet USP contains sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C17H17NCl2HCl is represented by the following structural formula. Sertraline hydrochloride is white to off white crystalline powder that is sparingly soluble in methanol and dimethyl formamide. Sertraline hydrochloride tablets USP for oral administration contain 28.0 mg, 56.0 mg, and 112.0 mg sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: Ascorbic acid (in 25 mg, 50 mg and 100 mg tablets), D&C Yellow #10 (in 25 mg tablet), dibasic calcium phosphate anhydrous, FD&C Blue #1 (in 25 mg tablet), FD&C Blue #2 (in 50 mg tablet), FD&C Red #40 (in 25 mg tablet), hydroxypropyl cellulose, hypromellose, iron oxide yellow (in 100 mg tablet), magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate , titanium dioxide and vanillin. Sertraline hydrochloride tablets USP are coated with vanillin flavored film coating material. Vanillin is a flavoring agent that possess vanilla like fragrance.</Description>
</NDC>
<NDC>
<NDCCode>64679-105-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-105-04) </PackageDescription>
<NDC11Code>64679-0105-04</NDC11Code>
<ProductNDC>64679-105</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>150</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-107-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64679-107-04) </PackageDescription>
<NDC11Code>64679-0107-04</NDC11Code>
<ProductNDC>64679-107</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Bupropion Hydrochloride</ProprietaryName>
<ProprietaryNameSuffix>(sr)</ProprietaryNameSuffix>
<NonProprietaryName>Bupropion Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120515</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201331</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>BUPROPION HYDROCHLORIDE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Aminoketone [EPC], Dopamine Uptake Inhibitors [MoA], Increased Dopamine Activity [PE], Increased Norepinephrine Activity [PE], Norepinephrine Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120515</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Bupropion hydrochloride extended-release tablets (SR) are an aminoketone antidepressant, indicated for the treatment of major depressive disorder (MDD). (1) .</IndicationAndUsage>
<Description>Bupropion hydrochloride extended-release tablets (SR), an antidepressant of the aminoketone class, are chemically unrelated to tricyclic, tetracyclic, selective serotonin re-uptake inhibitor, or other known antidepressant agents. Its structure closely resembles that of diethylpropion; it is related to phenylethylamines. It is designated as (±)-1-(3-chlorophenyl)-2-[(1,1-dimethylethyl) amino]-1-propanone hydrochloride. The molecular weight is 276.2. The molecular formula is C13H18ClNOHCl. Bupropion hydrochloride powder is white, crystalline, soluble in water, 0.1N HCl and in alcohol. It has a bitter taste and produces the sensation of local anesthesia on the oral mucosa. The structural formula is. Bupropion hydrochloride extended-release tablets (SR) are supplied for oral administration as 100-mg (blue), 150-mg (purple), and 200-mg (pink), film-coated, extended-release tablets. Each tablet contains the labeled amount of bupropion hydrochloride and the inactive ingredients: Ammonium Chloride, colloidal silicon dioxide, glyceryl behenate, ydroxyl propyl cellulose, magnesium stearate, mannitol, microcrystalline cellulose, stearic acid, talc, titanium dioxide. In addition, the 100-mg tablet contains FD&C Blue No. 1 Lake, the 150-mg tablet contains FD&C Blue No. 2 Lake and FD&C Red No. 40 Lake, and the 200-mg tablet contains FD&C Red No. 40 Lake. Bupropion hydrochloride extended-release tablets, USP (SR), 100 mg, 150 mg and 200 mg, meet USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-152-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-152-04) </PackageDescription>
<NDC11Code>64679-0152-04</NDC11Code>
<ProductNDC>64679-152</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>64679-153-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-153-04) </PackageDescription>
<NDC11Code>64679-0153-04</NDC11Code>
<ProductNDC>64679-153</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Valacyclovir Hydrochloride</ProprietaryName>
<NonProprietaryName>Valacyclovir Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100524</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090216</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>VALACYCLOVIR HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/1</StrengthUnit>
<Pharm_Classes>DNA Polymerase Inhibitors [MoA], Herpes Simplex Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpes Zoster Virus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Herpesvirus Nucleoside Analog DNA Polymerase Inhibitor [EPC], Nucleoside Analog [EXT]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100524</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Valacyclovir tablets, USP are a nucleoside analogue DNA polymerase inhibitor indicated for. Adult Patients ( 1.1). ● Cold Sores (Herpes Labialis). ● Genital Herpes. ● Treatment in immunocompetent patients (initial or recurrent episode). ● Suppression in immunocompetent or HIV-infected patients. ● Reduction of transmission. ● Herpes Zoster. Pediatric Patients ( 1.2). ● Cold Sores (Herpes Labialis). ● Chickenpox. Limitations of Use ( 1.3). ● The efficacy and safety of valacyclovir tablets, USP have not been established in immunocompromised patients other than for the suppression of genital herpes in HIV-infected patients.</IndicationAndUsage>
<Description>Valacyclovir hydrochloride is the hydrochloride salt of L-valyl ester of the antiviral drug acyclovir. Valacyclovir tablets, USP are for oral administration. Each tablet contains valacyclovir hydrochloride equivalent to 500 mg or 1 gram valacyclovir and the inactive ingredients croscarmellose sodium, FD&C Blue No. 2 aluminium lake, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, povidone, talc and titanium dioxide. The chemical name of valacyclovir hydrochloride is L-valine, 2-[(2-amino-1,6- dihydro-6-oxo-9 H-purin-9-yl)methoxy]ethyl ester, monohydrochloride. It has the following structural formula:. Valacyclovir hydrochloride, USP is a white to off-white powder with the molecular formula C 13H 20N 6O 4HCl and a molecular weight of 360.80. The maximum solubility in water at 25°C is 174 mg/mL. The pk as for valacyclovir hydrochloride are 1.90, 7.47, and 9.43.</Description>
</NDC>
<NDC>
<NDCCode>64679-154-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-154-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0154-04</NDC11Code>
<ProductNDC>64679-154</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-155-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-155-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0155-04</NDC11Code>
<ProductNDC>64679-155</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-171-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-171-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0171-04</NDC11Code>
<ProductNDC>64679-171</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-172-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-172-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0172-04</NDC11Code>
<ProductNDC>64679-172</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-174-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-174-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0174-04</NDC11Code>
<ProductNDC>64679-174</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-175-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-175-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0175-04</NDC11Code>
<ProductNDC>64679-175</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-177-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-177-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0177-04</NDC11Code>
<ProductNDC>64679-177</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ropinirole Hydrochloride</ProprietaryName>
<NonProprietaryName>Ropinirole Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080529</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079050</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>ROPINIROLE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Dopamine Agonists [MoA],Nonergot Dopamine Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Ropinirole tablets, USP is a non-ergoline dopamine agonist indicated for the treatment of Parkinson's disease (PD) and moderate-to-severe primary Restless Legs Syndrome (RLS). (1.1, 1.2).</IndicationAndUsage>
<Description>Ropinirole tablets, USP contains ropinirole, a non-ergoline dopamine agonist, as the hydrochloride salt. The chemical name of ropinirole hydrochloride is 4-[2-(dipropylamino)ethyl]-1,3-dihydro-2H-indol-2-one and the empirical formula is C16H24N2OHCl. The molecular weight is 296.84 (260.38 as the free base). The structural formula is. Ropinirole hydrochloride is a white to cream coloured crystalline powder with a melting range of 241° to 245°C. It is soluble in water and methanol, very slightly soluble in ethyl alcohol. Each irregular hexagonal shaped, film-coated tablet contains ropinirole hydrochloride equivalent to ropinirole, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg, or 5 mg. Inactive ingredients consist of: croscarmellose sodium, lactose monohydrate, hypromellose, magnesium stearate, microcrystalline cellulose and one or more of the following: carmine, FD&C Blue No. 2 aluminum lake, iron oxide black, iron oxide yellow, iron oxide red, polyethylene glycol 400, titanium dioxide. Ropinirole Tablets USP, 0.25 mg, 0.5 mg, 1 mg, 2 mg, 3 mg, 4 mg and 5 mg Meets USP Dissolution Test 2.</Description>
</NDC>
<NDC>
<NDCCode>64679-215-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-215-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0215-04</NDC11Code>
<ProductNDC>64679-215</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201948</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>50; .2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>64679-217-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-217-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0217-04</NDC11Code>
<ProductNDC>64679-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201948</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>75; .2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>64679-271-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-271-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-271-03) </PackageDescription>
<NDC11Code>64679-0271-04</NDC11Code>
<ProductNDC>64679-271</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202498</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels.</Description>
</NDC>
<NDC>
<NDCCode>64679-272-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-272-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-272-03) </PackageDescription>
<NDC11Code>64679-0272-04</NDC11Code>
<ProductNDC>64679-272</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202498</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>200</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels.</Description>
</NDC>
<NDC>
<NDCCode>64679-273-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-273-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-273-03) </PackageDescription>
<NDC11Code>64679-0273-04</NDC11Code>
<ProductNDC>64679-273</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202498</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels.</Description>
</NDC>
<NDC>
<NDCCode>64679-274-03</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-274-03) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-274-04) </PackageDescription>
<NDC11Code>64679-0274-03</NDC11Code>
<ProductNDC>64679-274</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202498</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels.</Description>
</NDC>
<NDC>
<NDCCode>64679-275-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-275-04) > 10 TABLET, EXTENDED RELEASE in 1 BLISTER PACK (64679-275-03) </PackageDescription>
<NDC11Code>64679-0275-04</NDC11Code>
<ProductNDC>64679-275</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lamotrigine</ProprietaryName>
<NonProprietaryName>Lamotrigine</NonProprietaryName>
<DosageFormName>TABLET, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121129</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202498</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>LAMOTRIGINE</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-epileptic Agent [EPC], Decreased Central Nervous System Disorganized Electrical Activity [PE], Mood Stabilizer [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-01-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20121129</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lamotrigine extended-release tablet is an antiepileptic drug (AED) indicated for: 1 Adjunctive therapy for primary generalized tonic-clonic seizures and partial-onset seizures with or without secondary generalization in patients aged 13 years and older. ( 1.1) , 2 Conversion to monotherapy in patients aged 13 years and older with partial-onset seizures who are receiving treatment with a single AED. ( 1.2) .</IndicationAndUsage>
<Description>Lamotrigine, an AED of the phenyltriazine class, is chemically unrelated to existing AEDs. Lamotrigine's chemical name is 3,5-diamino-6-(2,3-dichlorophenyl)- as-triazine, its molecular formula is C 9H 7N 5Cl 2, and its molecular weight is 256.09. Lamotrigine is a white or almost white powder and has a pK a of 5.7. Lamotrigine is very slightly soluble in water and in 0.1M hydrochloric acid. The structural formula is:. Lamotrigine extended-release tablets are supplied for oral administration as 25 mg (yellow, enteric-coated, circular shaped tablet), 50 mg (pink, enteric-coated, circular shaped tablet), 100 mg (light brown, enteric-coated, circular shaped tablet), 200 mg (pink, enteric-coated, circular shaped tablet), and 300 mg (pink, enteric-coated, circular shaped tablet). Each tablet contains the labeled amount of lamotrigine and the following inactive ingredients: diethyl phthalate, hypromellose, lactose monohydrate, magnesium stearate, methacrylic acid copolymer, polyethylene glycol, talc, titanium dioxide, iron oxide yellow for (25 mg and 100 mg) and iron oxide red for (50 mg, 100 mg, 200 mg, and 300 mg). Lamotrigine extended-release tablets contain a modified-release eroding formulation as the core. The tablets are coated with enteric coat to enable a controlled release of drug in the acidic environment of the stomach. The combination of this and the modified-release core are designed to control the dissolution rate of lamotrigine over a period of approximately 12 to 15 hours, leading to a gradual increase in serum lamotrigine levels.</Description>
</NDC>
<NDC>
<NDCCode>64679-311-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-311-04) </PackageDescription>
<NDC11Code>64679-0311-04</NDC11Code>
<ProductNDC>64679-311</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091267</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent.</Description>
</NDC>
<NDC>
<NDCCode>64679-312-04</NDCCode>
<PackageDescription>500 TABLET, FILM COATED in 1 BOTTLE (64679-312-04) </PackageDescription>
<NDC11Code>64679-0312-04</NDC11Code>
<ProductNDC>64679-312</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Donepezil Hydrochloride</ProprietaryName>
<NonProprietaryName>Donepezil Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110528</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA091267</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>DONEPEZIL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinesterase Inhibitor [EPC],Cholinesterase Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110528</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Donepezil hydrochloride is an acetylcholinesterase inhibitor indicated for the treatment of dementia of the Alzheimer's type. Efficacy has been demonstrated in patients with mild, moderate, and severe Alzheimer's Disease (1).</IndicationAndUsage>
<Description>Donepezil hydrochloride is a reversible inhibitor of the enzyme acetylcholinesterase, known chemically as (±)-2,3-dihydro-5,6-dimethoxy-2-[[1-(phenylmethyl)-4-piperidinyl]methyl]-1H-inden-1-one hydrochloride. Donepezil hydrochloride is commonly referred to in the pharmacological literature as E2020. It has an empirical formula of C24H29NO3HCl and a molecular weight of 415.96. Donepezil hydrochloride is a white to off-white powder and is soluble in water and acetic acid. Donepezil hydrochloride is available for oral administration in film-coated tablets containing 5 or 10 mg of donepezil hydrochloride. Inactive ingredients in 5 mg and 10 mg tablets are corn starch, hydroxypropyl cellulose, lactose monohydrate, microcrystalline cellulose and magnesium stearate. The film coating contains hypromellose, polyethylene glycol, talc and titanium dioxide. Additionally, the 10 mg tablet contains iron oxide yellow as a coloring agent.</Description>
</NDC>
<NDC>
<NDCCode>64679-314-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (64679-314-04) > 10 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>64679-0314-04</NDC11Code>
<ProductNDC>64679-314</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clopidogrel</ProprietaryName>
<NonProprietaryName>Clopidogrel</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120814</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202266</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>CLOPIDOGREL BISULFATE</SubstanceName>
<StrengthNumber>75</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Decreased Platelet Aggregation [PE],P2Y12 Platelet Inhibitor [EPC],P2Y12 Receptor Antagonists [MoA],Cytochrome P450 2C8 Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120814</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clopidogrel is a P2Y12 platelet inhibitor indicated for: : 1 Acute coronary syndrome.</IndicationAndUsage>
<Description>Clopidogrel bisulfate is a thienopyridine class inhibitor of P2Y12 ADP platelet receptors. Chemically it is methyl (+)-(S)-α-(2-chlorophenyl)-6,7-dihydrothieno[3,2-c]pyridine-5(4H) acetate sulfate (1:1). The empirical formula of clopidogrel bisulfate is C16H16ClNO2SH2SO4 and its molecular weight is 419.9. The structural formula is as follows:. Clopidogrel bisulfate, USP is a white to off-white powder. It is practically insoluble in water at neutral pH but freely soluble at pH 1. It also dissolves freely in methanol, dissolves sparingly in methylene chloride, and is practically insoluble in ethyl ether. It has a specific optical rotation of about +56°. Clopidogrel tablet, USP for oral administration is provided as either pink, round, biconvex, debossed, film-coated tablets containing 97.875 mg of clopidogrel bisulfate, USP which is the molar equivalent of 75 mg of clopidogrel base or pink, modified capsule shaped, debossed film-coated tablets containing 391.5 mg of clopidogrel bisulfate which is the molar equivalent of 300 mg of clopidogrel base. Each tablet contains glyceryl behenate, hydrogenated castor oil, hydroxypropylcellulose, mannitol, microcrystalline cellulose and polyethylene glycol 6000 as inactive ingredients. The pink film coating contains iron oxide red, hypromellose 2910, lactose monohydrate, titanium dioxide and triacetin.</Description>
</NDC>
</NDCList>