{
"NDC": [
{
"NDCCode": "64896-695-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) ",
"NDC11Code": "64896-0695-13",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-695-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-01) ",
"NDC11Code": "64896-0695-01",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-695-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-03) ",
"NDC11Code": "64896-0695-03",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-695-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-08) ",
"NDC11Code": "64896-0695-08",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-696-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) ",
"NDC11Code": "64896-0696-13",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-697-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) ",
"NDC11Code": "64896-0697-13",
"ProductNDC": "64896-697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) ",
"NDC11Code": "64896-0698-13",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-699-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) ",
"NDC11Code": "64896-0699-13",
"ProductNDC": "64896-699",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) ",
"NDC11Code": "64896-0700-13",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-701-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) ",
"NDC11Code": "64896-0701-13",
"ProductNDC": "64896-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16571-695-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16571-695-03) ",
"NDC11Code": "16571-0695-03",
"ProductNDC": "16571-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207370",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "16571-695-16",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (16571-695-16) > 6 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "16571-0695-16",
"ProductNDC": "16571-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207370",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "16571-695-81",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (16571-695-81) > 6 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "16571-0695-81",
"ProductNDC": "16571-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207370",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "250",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "35000-695-27",
"PackageDescription": "76 g in 1 CONTAINER (35000-695-27) ",
"NDC11Code": "35000-0695-27",
"ProductNDC": "35000-695",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Mens Speed Stick Overtime - Antiperspirant/deodorant",
"NonProprietaryName": "Aluminum Zirconium Tetrachlorohydrex Gly",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20181116",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M019",
"LabelerName": "COLGATE PALMOLIVE COMPANY",
"SubstanceName": "ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY",
"StrengthNumber": "156",
"StrengthUnit": "mg/g",
"Status": "Deprecated",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181116",
"SamplePackage": "N",
"IndicationAndUsage": "reduces underarm wetness. 48 hour protection."
},
{
"NDCCode": "37205-695-40",
"PackageDescription": "355 mL in 1 BOTTLE (37205-695-40)",
"NDC11Code": "37205-0695-40",
"ProductNDC": "37205-695",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Nite Time Cough",
"NonProprietaryName": "Dextromethorphan Hbr, Doxylamine Succinate",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20130428",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Cardinal Health",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE",
"StrengthNumber": "30; 12.5",
"StrengthUnit": "mg/30mL; mg/30mL",
"Status": "Deprecated",
"LastUpdate": "2018-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "46122-695-72",
"PackageDescription": "1 BOTTLE in 1 CARTON (46122-695-72) / 60 CAPSULE, LIQUID FILLED in 1 BOTTLE",
"NDC11Code": "46122-0695-72",
"ProductNDC": "46122-695",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nighttime Sleep-aid",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "CAPSULE, LIQUID FILLED",
"RouteName": "ORAL",
"StartMarketingDate": "20210715",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M010",
"LabelerName": "AMERISOURCE BERGEN",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-05-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20210715",
"SamplePackage": "N",
"IndicationAndUsage": "■ for relief of occasional sleeplessness ■ reduces time to fall asleep if you have difficulty falling asleep."
},
{
"NDCCode": "50268-695-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-695-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-695-11) ",
"NDC11Code": "50268-0695-15",
"ProductNDC": "50268-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078040",
"LabelerName": "AvPAK",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": ".5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20140827",
"SamplePackage": "N"
},
{
"NDCCode": "52244-010-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-010-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0010-02",
"ProductNDC": "52244-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120415",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "10",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120415",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-010-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-010-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0010-06",
"ProductNDC": "52244-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120415",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "10",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120415",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-020-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-020-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0020-02",
"ProductNDC": "52244-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "20",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120115",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-020-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-020-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0020-06",
"ProductNDC": "52244-020",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120115",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "20",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120115",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-040-02",
"PackageDescription": "2 BLISTER PACK in 1 CARTON (52244-040-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0040-02",
"ProductNDC": "52244-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "40",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120315",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "52244-040-06",
"PackageDescription": "6 BLISTER PACK in 1 CARTON (52244-040-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE",
"NDC11Code": "52244-0040-06",
"ProductNDC": "52244-040",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Edex",
"NonProprietaryName": "Alprostadil",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRACAVERNOUS",
"StartMarketingDate": "20120315",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020649",
"LabelerName": "Endo USA, Inc.",
"SubstanceName": "ALPROSTADIL",
"StrengthNumber": "40",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20120315",
"SamplePackage": "N",
"IndicationAndUsage": "edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.",
"Description": "edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively."
},
{
"NDCCode": "59088-695-54",
"PackageDescription": "30 TABLET, CHEWABLE in 1 BOTTLE, PLASTIC (59088-695-54) ",
"NDC11Code": "59088-0695-54",
"ProductNDC": "59088-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Davimet",
"NonProprietaryName": "Multivitamin",
"DosageFormName": "TABLET, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20220919",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "PureTek Corporation",
"SubstanceName": "VITAMIN A; ASCORBIC ACID; SODIUM ASCORBATE; CHOLECALCIFEROL; .ALPHA.-TOCOPHEROL ACETATE, DL-; PYRIDOXINE HYDROCHLORIDE; THIAMINE MONONITRATE; RIBOFLAVIN; NIACIN; FOLIC ACID; CYANOCOBALAMIN",
"StrengthNumber": "750; 24; 36; 10; 10; 1.05; 1.05; 1.2; 13.5; 1667; 4.5",
"StrengthUnit": "ug/1; mg/1; mg/1; ug/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; ug/1",
"Pharm_Classes": "Analogs/Derivatives [Chemical/Ingredient], Ascorbic Acid [CS], Ascorbic Acid [CS], Nicotinic Acid [EPC], Nicotinic Acids [CS], Vitamin A [CS], Vitamin A [EPC], Vitamin B 12 [CS], Vitamin B 6 [Chemical/Ingredient], Vitamin B12 [EPC], Vitamin B6 Analog [EPC], Vitamin C [EPC], Vitamin C [EPC], Vitamin D [CS], Vitamin D [EPC]",
"Status": "Active",
"LastUpdate": "2024-09-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20220919",
"SamplePackage": "N",
"IndicationAndUsage": "Davimet Multivitamin Chewable Tablets is indicated to provide significant amounts of Vitamins A, C, D, E, thiamine, riboflavin, niacin, vitamin B6, vitamin B12, and folate to supplement the diet, and to help assure that nutritional deficiencies of these vitamins will not develop. Expressly formulated to provide essential nutrients, tailored to the needs of all individuals ages 4 years old and above, promoting overall health, energy, and vitality.",
"Description": "Each Chewable Tablet Contains. Vitamin A (as Retinyl Acetate).................................... 750 mcg RAE Vitamin C (as Sodium Ascorbate & Ascorbic Acid).............. 60 mg Vitamin D3 (as Cholecalciferol)............................................ 10 mcg Vitamin E (as DL-Alpha Tocopheryl Acetate)....................... 10 mg Thiamin (as Thiamine Mononitrate).................................... 1.05 mg Riboflavin............................................................................... 1.2 mg Niacin (as Niacinamide)....................................................... 13.5 mg Vitamin B6 (as Pyridoxine Hydrochloride).......................... 1.05 mg Folate (as L-5-Methyltetrahydrofolate calcium salt)…1700 mcg DFE (1000 mcg as L-5-Methylfolate) Vitamin B12 (as Methylcobalamin)..................................... 4.5 mcg."
},
{
"NDCCode": "65841-695-01",
"PackageDescription": "100 CAPSULE in 1 BOTTLE (65841-695-01) ",
"NDC11Code": "65841-0695-01",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
},
{
"NDCCode": "65841-695-05",
"PackageDescription": "500 CAPSULE in 1 BOTTLE (65841-695-05) ",
"NDC11Code": "65841-0695-05",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
},
{
"NDCCode": "65841-695-06",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (65841-695-06) ",
"NDC11Code": "65841-0695-06",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
},
{
"NDCCode": "65841-695-10",
"PackageDescription": "1000 CAPSULE in 1 BOTTLE (65841-695-10) ",
"NDC11Code": "65841-0695-10",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
},
{
"NDCCode": "65841-695-14",
"PackageDescription": "60 CAPSULE in 1 BOTTLE (65841-695-14) ",
"NDC11Code": "65841-0695-14",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
},
{
"NDCCode": "65841-695-16",
"PackageDescription": "90 CAPSULE in 1 BOTTLE (65841-695-16) ",
"NDC11Code": "65841-0695-16",
"ProductNDC": "65841-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tamsulosin Hydrochloride",
"NonProprietaryName": "Tamsulosin Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20100427",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078225",
"LabelerName": "Zydus Lifesciences Limited",
"SubstanceName": "TAMSULOSIN HYDROCHLORIDE",
"StrengthNumber": ".4",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20100427",
"SamplePackage": "N"
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64896-695-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) </PackageDescription>
<NDC11Code>64896-0695-13</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-01) </PackageDescription>
<NDC11Code>64896-0695-01</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-03) </PackageDescription>
<NDC11Code>64896-0695-03</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-08) </PackageDescription>
<NDC11Code>64896-0695-08</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-696-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) </PackageDescription>
<NDC11Code>64896-0696-13</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-697-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) </PackageDescription>
<NDC11Code>64896-0697-13</NDC11Code>
<ProductNDC>64896-697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) </PackageDescription>
<NDC11Code>64896-0698-13</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-699-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) </PackageDescription>
<NDC11Code>64896-0699-13</NDC11Code>
<ProductNDC>64896-699</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) </PackageDescription>
<NDC11Code>64896-0700-13</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-701-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) </PackageDescription>
<NDC11Code>64896-0701-13</NDC11Code>
<ProductNDC>64896-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16571-695-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16571-695-03) </PackageDescription>
<NDC11Code>16571-0695-03</NDC11Code>
<ProductNDC>16571-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207370</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>16571-695-16</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (16571-695-16) > 6 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16571-0695-16</NDC11Code>
<ProductNDC>16571-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207370</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>16571-695-81</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (16571-695-81) > 6 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16571-0695-81</NDC11Code>
<ProductNDC>16571-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207370</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>35000-695-27</NDCCode>
<PackageDescription>76 g in 1 CONTAINER (35000-695-27) </PackageDescription>
<NDC11Code>35000-0695-27</NDC11Code>
<ProductNDC>35000-695</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Mens Speed Stick Overtime - Antiperspirant/deodorant</ProprietaryName>
<NonProprietaryName>Aluminum Zirconium Tetrachlorohydrex Gly</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20181116</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M019</ApplicationNumber>
<LabelerName>COLGATE PALMOLIVE COMPANY</LabelerName>
<SubstanceName>ALUMINUM ZIRCONIUM TETRACHLOROHYDREX GLY</SubstanceName>
<StrengthNumber>156</StrengthNumber>
<StrengthUnit>mg/g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181116</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces underarm wetness. 48 hour protection.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>37205-695-40</NDCCode>
<PackageDescription>355 mL in 1 BOTTLE (37205-695-40)</PackageDescription>
<NDC11Code>37205-0695-40</NDC11Code>
<ProductNDC>37205-695</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Nite Time Cough</ProprietaryName>
<NonProprietaryName>Dextromethorphan Hbr, Doxylamine Succinate</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130428</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; DOXYLAMINE SUCCINATE</SubstanceName>
<StrengthNumber>30; 12.5</StrengthNumber>
<StrengthUnit>mg/30mL; mg/30mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>46122-695-72</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (46122-695-72) / 60 CAPSULE, LIQUID FILLED in 1 BOTTLE</PackageDescription>
<NDC11Code>46122-0695-72</NDC11Code>
<ProductNDC>46122-695</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nighttime Sleep-aid</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>CAPSULE, LIQUID FILLED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20210715</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M010</ApplicationNumber>
<LabelerName>AMERISOURCE BERGEN</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-05-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20210715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>■ for relief of occasional sleeplessness ■ reduces time to fall asleep if you have difficulty falling asleep.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50268-695-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-695-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-695-11) </PackageDescription>
<NDC11Code>50268-0695-15</NDC11Code>
<ProductNDC>50268-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078040</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>52244-010-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-010-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0010-02</NDC11Code>
<ProductNDC>52244-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120415</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-010-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-010-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0010-06</NDC11Code>
<ProductNDC>52244-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120415</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120415</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-020-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-020-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0020-02</NDC11Code>
<ProductNDC>52244-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-020-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-020-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0020-06</NDC11Code>
<ProductNDC>52244-020</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120115</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-040-02</NDCCode>
<PackageDescription>2 BLISTER PACK in 1 CARTON (52244-040-02) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0040-02</NDC11Code>
<ProductNDC>52244-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>52244-040-06</NDCCode>
<PackageDescription>6 BLISTER PACK in 1 CARTON (52244-040-06) / 1 CARTRIDGE in 1 BLISTER PACK / 1 mL in 1 CARTRIDGE</PackageDescription>
<NDC11Code>52244-0040-06</NDC11Code>
<ProductNDC>52244-040</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Edex</ProprietaryName>
<NonProprietaryName>Alprostadil</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRACAVERNOUS</RouteName>
<StartMarketingDate>20120315</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020649</ApplicationNumber>
<LabelerName>Endo USA, Inc.</LabelerName>
<SubstanceName>ALPROSTADIL</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Genitourinary Arterial Vasodilation [PE], Prostaglandin Analog [EPC], Prostaglandin E1 Agonist [EPC], Prostaglandin Receptor Agonists [MoA], Prostaglandins [CS], Venous Vasodilation [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120315</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>edex® is indicated for the treatment of erectile dysfunction due to neurogenic, vasculogenic, psychogenic, or mixed etiology.</IndicationAndUsage>
<Description>edex® (alprostadil for injection) is a sterile, pyrogen-free powder containing alprostadil in an alfadex (α-cyclodextrin) inclusion complex. Alprostadil is an endogenous substance known as prostaglandin E1 (PGE1). edex® is supplied in single-dose, dual-chamber cartridges. edex® is lyophilized in single-dose, dual-chamber cartridges intended for use with the reusable edex® injection device. One chamber of the cartridge contains alprostadil, alfadex and lactose as a sterile, pyrogen-free powder. The other chamber contains 1.075 mL of sterile 0.9% sodium chloride. The edex® cartridges are supplied in three strengths: 10-mcg cartridge (10.75 mcg alprostadil, 347.55 mcg α-cyclodextrin, 51.06 mg lactose); 20-mcg cartridge (21.5 mcg alprostadil, 695.2 mcg α-cyclodextrin, 51.06 mg lactose); 40-mcg cartridge (43 mcg alprostadil, 1,390.3 mcg α-cyclodextrin, 51.06 mg lactose). The edex® injection device is used to reconstitute the sterile powder in one chamber with the sterile 0.9% sodium chloride in the other chamber. After reconstitution, the edex® injection device is used to administer the intracavernous injection of alprostadil. The chemical name for alprostadil is (1R,2R,3R)-3-Hydroxy-2-[(E)-(3S)-3-hydroxy-1-octenyl]-5-oxocyclopentane heptanoic acid. The empirical formula is C20H34O5 and the molecular weight is 354.49. The chemical structure is:. The α-cyclodextrin inclusion complex improves the water solubility of alprostadil. The empirical formula of α-cyclodextrin is C36H60O30 and the molecular weight is 972.85. The chemical structure is. Alprostadil alfadex is a white, odorless, hygroscopic powder. It is freely soluble in water and practically insoluble in ethanol, ethyl acetate and ether. After reconstitution, the active ingredient, alprostadil, immediately dissociates from the α-cyclodextrin inclusion complex. The reconstituted solution is clear and colorless and has a pH between 4.0 and 8.0. When the single-dose, dual-chamber cartridge containing either 10.75, 21.5, or 43 mcg of alprostadil is placed into the edex® injection device and reconstituted, the deliverable amount of alprostadil in each milliliter is 10, 20 or 40 mcg, respectively.</Description>
</NDC>
<NDC>
<NDCCode>59088-695-54</NDCCode>
<PackageDescription>30 TABLET, CHEWABLE in 1 BOTTLE, PLASTIC (59088-695-54) </PackageDescription>
<NDC11Code>59088-0695-54</NDC11Code>
<ProductNDC>59088-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Davimet</ProprietaryName>
<NonProprietaryName>Multivitamin</NonProprietaryName>
<DosageFormName>TABLET, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220919</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>PureTek Corporation</LabelerName>
<SubstanceName>VITAMIN A; ASCORBIC ACID; SODIUM ASCORBATE; CHOLECALCIFEROL; .ALPHA.-TOCOPHEROL ACETATE, DL-; PYRIDOXINE HYDROCHLORIDE; THIAMINE MONONITRATE; RIBOFLAVIN; NIACIN; FOLIC ACID; CYANOCOBALAMIN</SubstanceName>
<StrengthNumber>750; 24; 36; 10; 10; 1.05; 1.05; 1.2; 13.5; 1667; 4.5</StrengthNumber>
<StrengthUnit>ug/1; mg/1; mg/1; ug/1; mg/1; mg/1; mg/1; mg/1; mg/1; ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Analogs/Derivatives [Chemical/Ingredient], Ascorbic Acid [CS], Ascorbic Acid [CS], Nicotinic Acid [EPC], Nicotinic Acids [CS], Vitamin A [CS], Vitamin A [EPC], Vitamin B 12 [CS], Vitamin B 6 [Chemical/Ingredient], Vitamin B12 [EPC], Vitamin B6 Analog [EPC], Vitamin C [EPC], Vitamin C [EPC], Vitamin D [CS], Vitamin D [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-09-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Davimet Multivitamin Chewable Tablets is indicated to provide significant amounts of Vitamins A, C, D, E, thiamine, riboflavin, niacin, vitamin B6, vitamin B12, and folate to supplement the diet, and to help assure that nutritional deficiencies of these vitamins will not develop. Expressly formulated to provide essential nutrients, tailored to the needs of all individuals ages 4 years old and above, promoting overall health, energy, and vitality.</IndicationAndUsage>
<Description>Each Chewable Tablet Contains. Vitamin A (as Retinyl Acetate).................................... 750 mcg RAE Vitamin C (as Sodium Ascorbate & Ascorbic Acid).............. 60 mg Vitamin D3 (as Cholecalciferol)............................................ 10 mcg Vitamin E (as DL-Alpha Tocopheryl Acetate)....................... 10 mg Thiamin (as Thiamine Mononitrate).................................... 1.05 mg Riboflavin............................................................................... 1.2 mg Niacin (as Niacinamide)....................................................... 13.5 mg Vitamin B6 (as Pyridoxine Hydrochloride).......................... 1.05 mg Folate (as L-5-Methyltetrahydrofolate calcium salt)…1700 mcg DFE (1000 mcg as L-5-Methylfolate) Vitamin B12 (as Methylcobalamin)..................................... 4.5 mcg.</Description>
</NDC>
<NDC>
<NDCCode>65841-695-01</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE (65841-695-01) </PackageDescription>
<NDC11Code>65841-0695-01</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-695-05</NDCCode>
<PackageDescription>500 CAPSULE in 1 BOTTLE (65841-695-05) </PackageDescription>
<NDC11Code>65841-0695-05</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-695-06</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (65841-695-06) </PackageDescription>
<NDC11Code>65841-0695-06</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-695-10</NDCCode>
<PackageDescription>1000 CAPSULE in 1 BOTTLE (65841-695-10) </PackageDescription>
<NDC11Code>65841-0695-10</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-695-14</NDCCode>
<PackageDescription>60 CAPSULE in 1 BOTTLE (65841-695-14) </PackageDescription>
<NDC11Code>65841-0695-14</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>65841-695-16</NDCCode>
<PackageDescription>90 CAPSULE in 1 BOTTLE (65841-695-16) </PackageDescription>
<NDC11Code>65841-0695-16</NDC11Code>
<ProductNDC>65841-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tamsulosin Hydrochloride</ProprietaryName>
<NonProprietaryName>Tamsulosin Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100427</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078225</ApplicationNumber>
<LabelerName>Zydus Lifesciences Limited</LabelerName>
<SubstanceName>TAMSULOSIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic alpha-Antagonists [MoA], alpha-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100427</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
</NDCList>