{
"NDC": [
{
"NDCCode": "64896-696-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) ",
"NDC11Code": "64896-0696-13",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16571-696-13",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (16571-696-13) > 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "16571-0696-13",
"ProductNDC": "16571-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207398",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "69039-696-01",
"PackageDescription": "1 TUBE, WITH APPLICATOR in 1 CARTON (69039-696-01) / 13 g in 1 TUBE, WITH APPLICATOR (69039-696-00) ",
"NDC11Code": "69039-0696-01",
"ProductNDC": "69039-696",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sun Bum Premium Sunscreen Face Stick Broad Spectrum Spf 30 Sunscreen",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "STICK",
"RouteName": "TOPICAL",
"StartMarketingDate": "20250101",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M020",
"LabelerName": "Sun Bum, LLC",
"SubstanceName": "HOMOSALATE; OCTISALATE; AVOBENZONE; OCTOCRYLENE",
"StrengthNumber": "100; 50; 30; 100",
"StrengthUnit": "mg/g; mg/g; mg/g; mg/g",
"Status": "Active",
"LastUpdate": "2025-08-28",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": " helps prevent sunburn if used as directed with other sun protection measures, (see Directions) decreases the risk of skin cancer and early skin aging caused by the sun."
},
{
"NDCCode": "64896-696-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-01) ",
"NDC11Code": "64896-0696-01",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-696-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-03) ",
"NDC11Code": "64896-0696-03",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-696-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-08) ",
"NDC11Code": "64896-0696-08",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-695-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) ",
"NDC11Code": "64896-0695-13",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-697-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) ",
"NDC11Code": "64896-0697-13",
"ProductNDC": "64896-697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) ",
"NDC11Code": "64896-0698-13",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-699-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) ",
"NDC11Code": "64896-0699-13",
"ProductNDC": "64896-699",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) ",
"NDC11Code": "64896-0700-13",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-701-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) ",
"NDC11Code": "64896-0701-13",
"ProductNDC": "64896-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "10135-696-12",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (10135-696-12) > 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "10135-0696-12",
"ProductNDC": "10135-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090258",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC],Diphosphonates [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200301",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2) , 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, nonhygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Alendronate sodium tablets, USP for oral administration contain 6.53, 13.06, 45.69, or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5 mg, 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: microcrystalline cellulose, Croscarmellose sodium, and magnesium stearate."
},
{
"NDCCode": "10135-696-44",
"PackageDescription": "1 BLISTER PACK in 1 CARTON (10135-696-44) > 4 TABLET in 1 BLISTER PACK",
"NDC11Code": "10135-0696-44",
"ProductNDC": "10135-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alendronate",
"NonProprietaryName": "Alendronate Sodium",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20200301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090258",
"LabelerName": "Marlex Pharmaceuticals Inc",
"SubstanceName": "ALENDRONATE SODIUM",
"StrengthNumber": "35",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Bisphosphonate [EPC],Diphosphonates [CS]",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20200301",
"SamplePackage": "N",
"IndicationAndUsage": "Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2) , 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).",
"Description": "Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, nonhygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Alendronate sodium tablets, USP for oral administration contain 6.53, 13.06, 45.69, or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5 mg, 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: microcrystalline cellulose, Croscarmellose sodium, and magnesium stearate."
},
{
"NDCCode": "16571-696-03",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16571-696-03) ",
"NDC11Code": "16571-0696-03",
"ProductNDC": "16571-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207398",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "16571-696-91",
"PackageDescription": "3 BLISTER PACK in 1 CARTON (16571-696-91) > 3 TABLET, FILM COATED in 1 BLISTER PACK",
"NDC11Code": "16571-0696-91",
"ProductNDC": "16571-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Azithromycin",
"NonProprietaryName": "Azithromycin",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20180705",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207398",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "AZITHROMYCIN DIHYDRATE",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Macrolide Antimicrobial [EPC], Macrolides [CS]",
"Status": "Deprecated",
"LastUpdate": "2024-03-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20180705",
"SamplePackage": "N",
"IndicationAndUsage": "Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].",
"Description": "Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin."
},
{
"NDCCode": "35356-696-10",
"PackageDescription": "10 TABLET, FILM COATED in 1 BOTTLE (35356-696-10) ",
"NDC11Code": "35356-0696-10",
"ProductNDC": "35356-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074754",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20120518",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "35356-696-20",
"PackageDescription": "20 TABLET, FILM COATED in 1 BOTTLE (35356-696-20) ",
"NDC11Code": "35356-0696-20",
"ProductNDC": "35356-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074754",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20120518",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "35356-696-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE (35356-696-60) ",
"NDC11Code": "35356-0696-60",
"ProductNDC": "35356-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ketorolac Tromethamine",
"NonProprietaryName": "Ketorolac Tromethamine",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20100420",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074754",
"LabelerName": "Lake Erie Medical DBA Quality Care Products LLC",
"SubstanceName": "KETOROLAC TROMETHAMINE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-12-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20120518",
"SamplePackage": "N",
"IndicationAndUsage": "Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.",
"Description": "Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide."
},
{
"NDCCode": "37205-696-26",
"PackageDescription": "1 BOTTLE in 1 CARTON (37205-696-26) > 118 mL in 1 BOTTLE",
"NDC11Code": "37205-0696-26",
"ProductNDC": "37205-696",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Leader Tussin Cf Max",
"NonProprietaryName": "Dextromethorphan Hbr, Guaifenesin, Phenylephrine Hcl",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20121226",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "Cardinal Health",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE",
"StrengthNumber": "20; 400; 10",
"StrengthUnit": "mg/10mL; mg/10mL; mg/10mL",
"Status": "Deprecated",
"LastUpdate": "2018-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231"
},
{
"NDCCode": "45865-696-30",
"PackageDescription": "30 TABLET in 1 BOTTLE (45865-696-30)",
"NDC11Code": "45865-0696-30",
"ProductNDC": "45865-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074342",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake."
},
{
"NDCCode": "45865-696-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (45865-696-60)",
"NDC11Code": "45865-0696-60",
"ProductNDC": "45865-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074342",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake."
},
{
"NDCCode": "45865-696-90",
"PackageDescription": "90 TABLET in 1 BOTTLE (45865-696-90)",
"NDC11Code": "45865-0696-90",
"ProductNDC": "45865-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Alprazolam",
"NonProprietaryName": "Alprazolam",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "19950103",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074342",
"LabelerName": "Medsource Pharmaceuticals",
"SubstanceName": "ALPRAZOLAM",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Benzodiazepine [EPC],Benzodiazepines [CS]",
"DEASchedule": "CIV",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231",
"IndicationAndUsage": "Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.",
"Description": "Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake."
},
{
"NDCCode": "49349-696-02",
"PackageDescription": "30 TABLET in 1 BLISTER PACK (49349-696-02)",
"NDC11Code": "49349-0696-02",
"ProductNDC": "49349-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydroxyzine Hydrochloride",
"NonProprietaryName": "Hydroxyzine Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20110404",
"EndMarketingDate": "20171122",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA088618",
"LabelerName": "REMEDYREPACK INC.",
"SubstanceName": "HYDROXYZINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antihistamine [EPC],Histamine Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2017-01-13"
},
{
"NDCCode": "50268-696-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-696-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-696-11) ",
"NDC11Code": "50268-0696-15",
"ProductNDC": "50268-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078040",
"LabelerName": "AvPAK",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "1",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20140827",
"SamplePackage": "N"
},
{
"NDCCode": "60760-696-30",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-696-30)",
"NDC11Code": "60760-0696-30",
"ProductNDC": "60760-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078671",
"LabelerName": "St. Mary's Medical Park Pharmacy",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "60760-696-60",
"PackageDescription": "60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-696-60)",
"NDC11Code": "60760-0696-60",
"ProductNDC": "60760-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nabumetone",
"NonProprietaryName": "Nabumetone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20080301",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078671",
"LabelerName": "St. Mary's Medical Park Pharmacy",
"SubstanceName": "NABUMETONE",
"StrengthNumber": "750",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "62037-696-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-696-30) ",
"NDC11Code": "62037-0696-30",
"ProductNDC": "62037-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Taztia",
"ProprietaryNameSuffix": "Xt",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075401",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "120",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20030410",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride extended-release capsules (once-a-day dosage) are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications.",
"Description": "Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol and chloroform and has a molecular weight of 450.98. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) contain diltiazem hydrochloride in extended-release pellets at doses of 120, 180, 240, 300 and 360 mg. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) also contains: black iron oxide, corn starch, ethylcellulose, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, hypromellose 2910, magnesium stearate, nonoxynol 100, pharmaceutical glaze, polysorbate 80, polyacrylic dispersion, povidone, propylene glycol, sucrose, talc and titanium dioxide. The 120 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 180 mg capsules also contain: D&C Yellow #10, FD&C Blue #1 and FD&C Yellow #6. The 240 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 300 mg capsules also contain: D&C Red #28, D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and FD&C Yellow #6. The 360 mg capsules also contain: FD&C Blue #1. For oral administration. Meets USP requirements for dissolution test 15."
},
{
"NDCCode": "64896-076-09",
"PackageDescription": "90 PACKET in 1 CARTON (64896-076-09) / 1 GRANULE in 1 PACKET",
"NDC11Code": "64896-0076-09",
"ProductNDC": "64896-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "64896-077-09",
"PackageDescription": "90 PACKET in 1 CARTON (64896-077-09) / 1 GRANULE in 1 PACKET",
"NDC11Code": "64896-0077-09",
"ProductNDC": "64896-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64896-696-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) </PackageDescription>
<NDC11Code>64896-0696-13</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16571-696-13</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (16571-696-13) > 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16571-0696-13</NDC11Code>
<ProductNDC>16571-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207398</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>69039-696-01</NDCCode>
<PackageDescription>1 TUBE, WITH APPLICATOR in 1 CARTON (69039-696-01) / 13 g in 1 TUBE, WITH APPLICATOR (69039-696-00) </PackageDescription>
<NDC11Code>69039-0696-01</NDC11Code>
<ProductNDC>69039-696</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sun Bum Premium Sunscreen Face Stick Broad Spectrum Spf 30 Sunscreen</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>STICK</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20250101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M020</ApplicationNumber>
<LabelerName>Sun Bum, LLC</LabelerName>
<SubstanceName>HOMOSALATE; OCTISALATE; AVOBENZONE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>100; 50; 30; 100</StrengthNumber>
<StrengthUnit>mg/g; mg/g; mg/g; mg/g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-08-28</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage> helps prevent sunburn if used as directed with other sun protection measures, (see Directions) decreases the risk of skin cancer and early skin aging caused by the sun.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>64896-696-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-01) </PackageDescription>
<NDC11Code>64896-0696-01</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-696-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-03) </PackageDescription>
<NDC11Code>64896-0696-03</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-696-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-08) </PackageDescription>
<NDC11Code>64896-0696-08</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) </PackageDescription>
<NDC11Code>64896-0695-13</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-697-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) </PackageDescription>
<NDC11Code>64896-0697-13</NDC11Code>
<ProductNDC>64896-697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) </PackageDescription>
<NDC11Code>64896-0698-13</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-699-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) </PackageDescription>
<NDC11Code>64896-0699-13</NDC11Code>
<ProductNDC>64896-699</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) </PackageDescription>
<NDC11Code>64896-0700-13</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-701-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) </PackageDescription>
<NDC11Code>64896-0701-13</NDC11Code>
<ProductNDC>64896-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>10135-696-12</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (10135-696-12) > 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>10135-0696-12</NDC11Code>
<ProductNDC>10135-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090258</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC],Diphosphonates [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2) , 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, nonhygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Alendronate sodium tablets, USP for oral administration contain 6.53, 13.06, 45.69, or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5 mg, 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: microcrystalline cellulose, Croscarmellose sodium, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>10135-696-44</NDCCode>
<PackageDescription>1 BLISTER PACK in 1 CARTON (10135-696-44) > 4 TABLET in 1 BLISTER PACK</PackageDescription>
<NDC11Code>10135-0696-44</NDC11Code>
<ProductNDC>10135-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alendronate</ProprietaryName>
<NonProprietaryName>Alendronate Sodium</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090258</ApplicationNumber>
<LabelerName>Marlex Pharmaceuticals Inc</LabelerName>
<SubstanceName>ALENDRONATE SODIUM</SubstanceName>
<StrengthNumber>35</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Bisphosphonate [EPC],Diphosphonates [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Alendronate sodium is a bisphosphonate indicated for: 1 Treatment and prevention of osteoporosis in postmenopausal women (1.1, 1.2) , 2 Treatment to increase bone mass in men with osteoporosis (1.3), 3 Treatment of glucocorticoid-induced osteoporosis (1.4), 4 Treatment of Paget's disease of bone (1.5).</IndicationAndUsage>
<Description>Alendronate sodium is a bisphosphonate that acts as a specific inhibitor of osteoclast-mediated bone resorption. Bisphosphonates are synthetic analogs of pyrophosphate that bind to the hydroxyapatite found in bone. Alendronate sodium is chemically described as (4-amino-1-hydroxybutylidene) bisphosphonic acid monosodium salt trihydrate. The molecular formula of alendronate sodium is C4H12NNaO7P23H2O and its formula weight is 325.12. The structural formula is. Alendronate sodium is a white, crystalline, nonhygroscopic powder. It is soluble in water, very slightly soluble in alcohol, and practically insoluble in chloroform. Alendronate sodium tablets, USP for oral administration contain 6.53, 13.06, 45.69, or 91.37 mg of alendronate monosodium salt trihydrate, which is the molar equivalent of 5 mg, 10 mg, 35 mg, and 70 mg, respectively, of free acid, and the following inactive ingredients: microcrystalline cellulose, Croscarmellose sodium, and magnesium stearate.</Description>
</NDC>
<NDC>
<NDCCode>16571-696-03</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16571-696-03) </PackageDescription>
<NDC11Code>16571-0696-03</NDC11Code>
<ProductNDC>16571-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207398</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>16571-696-91</NDCCode>
<PackageDescription>3 BLISTER PACK in 1 CARTON (16571-696-91) > 3 TABLET, FILM COATED in 1 BLISTER PACK</PackageDescription>
<NDC11Code>16571-0696-91</NDC11Code>
<ProductNDC>16571-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Azithromycin</ProprietaryName>
<NonProprietaryName>Azithromycin</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20180705</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207398</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>AZITHROMYCIN DIHYDRATE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Macrolide Antimicrobial [EPC], Macrolides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-03-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180705</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Azithromycin is a macrolide antibacterial drug indicated for the treatment of patients with mild to moderate infections caused by susceptible strains of the designated microorganisms in the specific conditions listed below. Recommended dosages and durations of therapy in adult and pediatric patient populations vary in these indications. [see Dosage and Administration (2)].</IndicationAndUsage>
<Description>Azithromycin tablets USP contain the active ingredient azithromycin, a macrolide antibacterial drug, for oral administration. Azithromycin has the chemical name (2R,3S,4R,5R,8R,10R,11R,12S,13S,14R)-13-[(2,6-dideoxy-3-C-methyl-3-O-methyl-α-L-ribo-hexopyranosyl)oxy]-2-ethyl-3,4,10-trihydroxy-3,5,6,8,10,12,14-heptamethyl-11-[[3,4,6-trideoxy-3-(dimethylamino)-β-D-xylo-hexopyranosyl]oxy]-1-oxa-6-azacyclopentadecan-15-one. Azithromycin is derived from erythromycin; however, it differs chemically from erythromycin in that a methyl-substituted nitrogen atom is incorporated into the lactone ring. Its molecular formula is C38H72N2O12, and its molecular weight is 749.00. Azithromycin has the following structural formula. Azithromycin, as the dihydrate, is a white or almost white powder with a molecular formula of C38H72N2O122H2O and a molecular weight of 785.0. Azithromycin is supplied as tablets containing azithromycin dihydrate USP equivalent to either 250 mg or 500 mg azithromycin and the following inactive ingredients: croscarmellose sodium, dibasic calcium phosphate anhydrous, hypromellose, lactose monohydrate, pregelatinized starch (maize), magnesium stearate, sodium lauryl sulfate, titanium dioxide and triacetin.</Description>
</NDC>
<NDC>
<NDCCode>35356-696-10</NDCCode>
<PackageDescription>10 TABLET, FILM COATED in 1 BOTTLE (35356-696-10) </PackageDescription>
<NDC11Code>35356-0696-10</NDC11Code>
<ProductNDC>35356-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074754</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>35356-696-20</NDCCode>
<PackageDescription>20 TABLET, FILM COATED in 1 BOTTLE (35356-696-20) </PackageDescription>
<NDC11Code>35356-0696-20</NDC11Code>
<ProductNDC>35356-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074754</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>35356-696-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE (35356-696-60) </PackageDescription>
<NDC11Code>35356-0696-60</NDC11Code>
<ProductNDC>35356-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ketorolac Tromethamine</ProprietaryName>
<NonProprietaryName>Ketorolac Tromethamine</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20100420</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074754</ApplicationNumber>
<LabelerName>Lake Erie Medical DBA Quality Care Products LLC</LabelerName>
<SubstanceName>KETOROLAC TROMETHAMINE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitor [EPC], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-12-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20120518</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carefully consider the potential benefits and risks of ketorolac tromethamine and other treatment options before deciding to use ketorolac tromethamine. Use the lowest effective dose for the shortest duration consistent with individual patient treatment goals.</IndicationAndUsage>
<Description>Ketorolac tromethamine is a member of the pyrrolo-pyrrole group of non-steroidal anti-inflammatory drugs (NSAIDs). The chemical name for ketorolac tromethamine is (±)-5-benzoyl-2,3-dihydro-1H-pyrrolizine-1-carboxylic acid, compound with 2-amino-2-(hydroxymethyl)-1,3-propanediol. The structural formula is. C19H24N2O6 M.W. 376.41. Ketorolac tromethamine is a racemic mixture of [-]S and [+]R ketorolac tromethamine. Ketorolac tromethamine may exist in three crystal forms. All forms are equally soluble in water. Ketorolac tromethamine has a pKa of 3.5 and an n-octanol/water partition coefficient of 0.26. Ketorolac tromethamine tablets are round, white, unscored, film-coated tablets. Each tablet, for oral administration, contains 10 mg ketorolac tromethamine, the active ingredient. In addition, each tablet contains the following inactive ingredients: hydroxypropyl cellulose, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>37205-696-26</NDCCode>
<PackageDescription>1 BOTTLE in 1 CARTON (37205-696-26) > 118 mL in 1 BOTTLE</PackageDescription>
<NDC11Code>37205-0696-26</NDC11Code>
<ProductNDC>37205-696</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Leader Tussin Cf Max</ProprietaryName>
<NonProprietaryName>Dextromethorphan Hbr, Guaifenesin, Phenylephrine Hcl</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20121226</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>Cardinal Health</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN; PHENYLEPHRINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20; 400; 10</StrengthNumber>
<StrengthUnit>mg/10mL; mg/10mL; mg/10mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2018-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>45865-696-30</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (45865-696-30)</PackageDescription>
<NDC11Code>45865-0696-30</NDC11Code>
<ProductNDC>45865-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074342</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>45865-696-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (45865-696-60)</PackageDescription>
<NDC11Code>45865-0696-60</NDC11Code>
<ProductNDC>45865-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074342</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>45865-696-90</NDCCode>
<PackageDescription>90 TABLET in 1 BOTTLE (45865-696-90)</PackageDescription>
<NDC11Code>45865-0696-90</NDC11Code>
<ProductNDC>45865-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Alprazolam</ProprietaryName>
<NonProprietaryName>Alprazolam</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19950103</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074342</ApplicationNumber>
<LabelerName>Medsource Pharmaceuticals</LabelerName>
<SubstanceName>ALPRAZOLAM</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Benzodiazepine [EPC],Benzodiazepines [CS]</Pharm_Classes>
<DEASchedule>CIV</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Anxiety Disorders. Alprazolam tablets, USP are indicated for the management of anxiety disorder (a condition corresponding most closely to the APA Diagnostic and Statistical Manual [DSM-III-R] diagnosis of generalized anxiety disorder) or the short-term relief of symptoms of anxiety. Anxiety or tension associated with the stress of everyday life usually does not require treatment with an anxiolytic. Generalized anxiety disorder is characterized by unrealistic or excessive anxiety and worry (apprehensive expectation) about two or more life circumstances, for a period of 6 months or longer, during which the person has been bothered more days than not by these concerns. At least 6 of the following 18 symptoms are often present in these patients: Motor Tension (trembling, twitching, or feeling shaky; muscle tension, aches, or soreness; restlessness; easy fatigability); Autonomic Hyperactivity (shortness of breath or smothering sensations; palpitations or accelerated heart rate; sweating, or cold clammy hands; dry mouth; dizziness or light-headedness; nausea, diarrhea, or other abdominal distress; flushes or chills; frequent urination; trouble swallowing or 'lump in throat'); Vigilance and Scanning (feeling keyed up or on edge; exaggerated startle response; difficulty concentrating or 'mind going blank' because of anxiety; trouble falling or staying asleep; irritability). These symptoms must not be secondary to another psychiatric disorder or caused by some organic factor. Anxiety associated with depression is responsive to alprazolam. Panic Disorder. Alprazolam tablets, USP are also indicated for the treatment of panic disorder, with or without agoraphobia. Studies supporting this claim were conducted in patients whose diagnoses corresponded closely to the DSM-III-R/IV criteria for panic disorder (see CLINICAL STUDIES). Panic disorder (DSM-IV) is characterized by recurrent unexpected panic attacks, ie, a discrete period of intense fear or discomfort in which four (or more) of the following symptoms develop abruptly and reach a peak within 10 minutes: (1) palpitations, pounding heart, or accelerated heart rate; (2) sweating; (3) trembling or shaking; (4) sensations of shortness of breath or smothering; (5) feeling of choking; (6) chest pain or discomfort; (7) nausea or abdominal distress; (8) feeling dizzy, unsteady, lightheaded, or faint; (9) derealization (feelings of unreality) or depersonalization (being detached from oneself); (10) fear of losing control; (11) fear of dying; (12) paresthesias (numbness or tingling sensations); (13) chills or hot flushes. Demonstrations of the effectiveness of alprazolam by systematic clinical study are limited to 4 months duration for anxiety disorder and 4 to 10 weeks duration for panic disorder; however, patients with panic disorder have been treated on an open basis for up to 8 months without apparent loss of benefit. The physician should periodically reassess the usefulness of the drug for the individual patient.</IndicationAndUsage>
<Description>Alprazolam tablets, USP contain alprazolam which is a triazolo analog of the 1,4 benzodiazepine class of central nervous system-active compounds. The chemical name of alprazolam is 8-Chloro-1-methyl-6-phenyl-4H-s-triazolo [4,3-α] [1,4] benzodiazepine. Alprazolam, USP is a white to off-white crystalline powder, which is soluble in alcohol but which has no appreciable solubility in water at physiological pH. Each tablet, for oral administration, contains 0.25 mg, 0.5 mg, 1 mg, and 2 mg of alprazolam, USP. The 2 mg tablets are multi-scored, and may be divided in half to provide two 1 mg segments, or quarters to provide four 0.5 mg segments. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, corn starch, docusate sodium, lactose monohydrate, magnesium stearate, microcrystalline cellulose, and sodium benzoate. The 0.5 mg tablet also contains FD&C yellow #6 aluminum lake (sunset yellow lake). The 1 mg tablet also contains FD&C blue #2 aluminum lake. The 2 mg tablet also contains D&C yellow #10 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>49349-696-02</NDCCode>
<PackageDescription>30 TABLET in 1 BLISTER PACK (49349-696-02)</PackageDescription>
<NDC11Code>49349-0696-02</NDC11Code>
<ProductNDC>49349-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydroxyzine Hydrochloride</ProprietaryName>
<NonProprietaryName>Hydroxyzine Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110404</StartMarketingDate>
<EndMarketingDate>20171122</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA088618</ApplicationNumber>
<LabelerName>REMEDYREPACK INC.</LabelerName>
<SubstanceName>HYDROXYZINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antihistamine [EPC],Histamine Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-01-13</LastUpdate>
</NDC>
<NDC>
<NDCCode>50268-696-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-696-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-696-11) </PackageDescription>
<NDC11Code>50268-0696-15</NDC11Code>
<ProductNDC>50268-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078040</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>60760-696-30</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-696-30)</PackageDescription>
<NDC11Code>60760-0696-30</NDC11Code>
<ProductNDC>60760-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078671</ApplicationNumber>
<LabelerName>St. Mary's Medical Park Pharmacy</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>60760-696-60</NDCCode>
<PackageDescription>60 TABLET, FILM COATED in 1 BOTTLE, PLASTIC (60760-696-60)</PackageDescription>
<NDC11Code>60760-0696-60</NDC11Code>
<ProductNDC>60760-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nabumetone</ProprietaryName>
<NonProprietaryName>Nabumetone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20080301</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078671</ApplicationNumber>
<LabelerName>St. Mary's Medical Park Pharmacy</LabelerName>
<SubstanceName>NABUMETONE</SubstanceName>
<StrengthNumber>750</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Nonsteroidal Anti-inflammatory Compounds [Chemical/Ingredient],Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>62037-696-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-696-30) </PackageDescription>
<NDC11Code>62037-0696-30</NDC11Code>
<ProductNDC>62037-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Taztia</ProprietaryName>
<ProprietaryNameSuffix>Xt</ProprietaryNameSuffix>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075401</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>120</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride extended-release capsules (once-a-day dosage) are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications.</IndicationAndUsage>
<Description>Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol and chloroform and has a molecular weight of 450.98. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) contain diltiazem hydrochloride in extended-release pellets at doses of 120, 180, 240, 300 and 360 mg. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) also contains: black iron oxide, corn starch, ethylcellulose, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, hypromellose 2910, magnesium stearate, nonoxynol 100, pharmaceutical glaze, polysorbate 80, polyacrylic dispersion, povidone, propylene glycol, sucrose, talc and titanium dioxide. The 120 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 180 mg capsules also contain: D&C Yellow #10, FD&C Blue #1 and FD&C Yellow #6. The 240 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 300 mg capsules also contain: D&C Red #28, D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and FD&C Yellow #6. The 360 mg capsules also contain: FD&C Blue #1. For oral administration. Meets USP requirements for dissolution test 15.</Description>
</NDC>
<NDC>
<NDCCode>64896-076-09</NDCCode>
<PackageDescription>90 PACKET in 1 CARTON (64896-076-09) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>64896-0076-09</NDC11Code>
<ProductNDC>64896-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>64896-077-09</NDCCode>
<PackageDescription>90 PACKET in 1 CARTON (64896-077-09) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>64896-0077-09</NDC11Code>
<ProductNDC>64896-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
</NDCList>