{
"NDC": [
{
"NDCCode": "64896-698-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) ",
"NDC11Code": "64896-0698-13",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-01) ",
"NDC11Code": "64896-0698-01",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-03) ",
"NDC11Code": "64896-0698-03",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-08) ",
"NDC11Code": "64896-0698-08",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-695-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) ",
"NDC11Code": "64896-0695-13",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-696-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) ",
"NDC11Code": "64896-0696-13",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-697-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) ",
"NDC11Code": "64896-0697-13",
"ProductNDC": "64896-697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-699-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) ",
"NDC11Code": "64896-0699-13",
"ProductNDC": "64896-699",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) ",
"NDC11Code": "64896-0700-13",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-701-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) ",
"NDC11Code": "64896-0701-13",
"ProductNDC": "64896-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "16571-698-01",
"PackageDescription": "100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-01) ",
"NDC11Code": "16571-0698-01",
"ProductNDC": "16571-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201921",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200111",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "16571-698-09",
"PackageDescription": "90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-09) ",
"NDC11Code": "16571-0698-09",
"ProductNDC": "16571-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201921",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200111",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "16571-698-50",
"PackageDescription": "500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-50) ",
"NDC11Code": "16571-0698-50",
"ProductNDC": "16571-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lansoprazole",
"NonProprietaryName": "Lansoprazole",
"DosageFormName": "CAPSULE, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20200111",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201921",
"LabelerName": "Rising Pharma Holdings, Inc.",
"SubstanceName": "LANSOPRAZOLE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-11-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20200111",
"SamplePackage": "N",
"IndicationAndUsage": "Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).",
"Description": "The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide."
},
{
"NDCCode": "37808-698-34",
"PackageDescription": "237 mL in 1 BOTTLE (37808-698-34)",
"NDC11Code": "37808-0698-34",
"ProductNDC": "37808-698",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Rx Act Cough And Sore Throat",
"NonProprietaryName": "Acetaminophen, Dextromethorphan Hbr",
"DosageFormName": "LIQUID",
"RouteName": "ORAL",
"StartMarketingDate": "20060828",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "H E B",
"SubstanceName": "ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE",
"StrengthNumber": "500; 15",
"StrengthUnit": "mg/15mL; mg/15mL",
"Status": "Deprecated",
"LastUpdate": "2017-12-13",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "43598-698-11",
"PackageDescription": "1 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-11) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0698-11",
"ProductNDC": "43598-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211941",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230420",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "43598-698-58",
"PackageDescription": "10 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-58) / 1 mL in 1 VIAL, SINGLE-DOSE",
"NDC11Code": "43598-0698-58",
"ProductNDC": "43598-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Carboprost Tromethamine",
"NonProprietaryName": "Carboprost Tromethamine",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAMUSCULAR",
"StartMarketingDate": "20190702",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA211941",
"LabelerName": "Dr. Reddy's Laboratories Inc.",
"SubstanceName": "CARBOPROST TROMETHAMINE",
"StrengthNumber": "250",
"StrengthUnit": "ug/mL",
"Pharm_Classes": "Prostaglandin Analog [EPC], Prostaglandins [CS]",
"Status": "Active",
"LastUpdate": "2025-04-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20190702",
"SamplePackage": "N",
"IndicationAndUsage": "Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.",
"Description": "Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile."
},
{
"NDCCode": "50268-698-15",
"PackageDescription": "50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-698-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-698-11) ",
"NDC11Code": "50268-0698-15",
"ProductNDC": "50268-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Risperidone",
"NonProprietaryName": "Risperidone",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20140827",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA078040",
"LabelerName": "AvPAK",
"SubstanceName": "RISPERIDONE",
"StrengthNumber": "3",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Atypical Antipsychotic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2023-04-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20140827",
"SamplePackage": "N"
},
{
"NDCCode": "62037-698-30",
"PackageDescription": "30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-698-30) ",
"NDC11Code": "62037-0698-30",
"ProductNDC": "62037-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Taztia",
"ProprietaryNameSuffix": "Xt",
"NonProprietaryName": "Diltiazem Hydrochloride",
"DosageFormName": "CAPSULE, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20030410",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075401",
"LabelerName": "Actavis Pharma, Inc.",
"SubstanceName": "DILTIAZEM HYDROCHLORIDE",
"StrengthNumber": "240",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-06-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20030410",
"SamplePackage": "N",
"IndicationAndUsage": "Diltiazem hydrochloride extended-release capsules (once-a-day dosage) are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications.",
"Description": "Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol and chloroform and has a molecular weight of 450.98. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) contain diltiazem hydrochloride in extended-release pellets at doses of 120, 180, 240, 300 and 360 mg. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) also contains: black iron oxide, corn starch, ethylcellulose, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, hypromellose 2910, magnesium stearate, nonoxynol 100, pharmaceutical glaze, polysorbate 80, polyacrylic dispersion, povidone, propylene glycol, sucrose, talc and titanium dioxide. The 120 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 180 mg capsules also contain: D&C Yellow #10, FD&C Blue #1 and FD&C Yellow #6. The 240 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 300 mg capsules also contain: D&C Red #28, D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and FD&C Yellow #6. The 360 mg capsules also contain: FD&C Blue #1. For oral administration. Meets USP requirements for dissolution test 15."
},
{
"NDCCode": "65862-698-20",
"PackageDescription": "20 TABLET in 1 BOTTLE (65862-698-20) ",
"NDC11Code": "65862-0698-20",
"ProductNDC": "65862-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Axetil",
"NonProprietaryName": "Cefuroxime Axetil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065308",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "CEFUROXIME AXETIL",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060329",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime axetil tablets are a cephalosporin antibacterial drug indicated for the treatment of the following infections due to susceptible bacteria: (1): 1 Pharyngitis/tonsillitis (adults and pediatric patients) (1.1), 2 Acute bacterial otitis media (pediatric patients) (1.2), 3 Acute bacterial maxillary sinusitis (adults and pediatric patients) (1.3), 4 Acute bacterial exacerbations of chronic bronchitis (adults and pediatric patients 13 years and older) (1.4), 5 Uncomplicated skin and skin-structure infections (adults and pediatric patients 13 years and older) (1.5), 6 Uncomplicated urinary tract infections (adults and pediatric patients 13 years and older) (1.6), 7 Uncomplicated gonorrhea (adults and pediatric patients 13 years and older) (1.7), 8 Early Lyme disease (adults and pediatric patients 13 years and older) (1.8).",
"Description": "Cefuroxime axetil tablets, USP contain cefuroxime as cefuroxime axetil. Cefuroxime axetil is a semisynthetic, cephalosporin antibacterial drug for oral administration. The chemical name of cefuroxime axetil (1-(acetyloxy) ethyl ester of cefuroxime) is (RS)-1-hydroxyethyl (6R,7R)-7-[2-(2-furyl)glyoxyl-amido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]-oct-2-ene-2-carboxylate, 72-(Z)-(O-methyl-oxime), 1-acetate 3-carbamate. Its molecular formula is C20H22N4O10S, and it has a molecular weight of 510.48. Cefuroxime axetil is in the amorphous form and has the following structural formula: Tablets are film-coated and contain the equivalent of 125 mg, 250 mg or 500 mg of cefuroxime as cefuroxime axetil USP. Tablets contain the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hydrogenated vegetable oil, hypromellose, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "65862-698-60",
"PackageDescription": "60 TABLET in 1 BOTTLE (65862-698-60) ",
"NDC11Code": "65862-0698-60",
"ProductNDC": "65862-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Cefuroxime Axetil",
"NonProprietaryName": "Cefuroxime Axetil",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20060329",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA065308",
"LabelerName": "Aurobindo Pharma Limited",
"SubstanceName": "CEFUROXIME AXETIL",
"StrengthNumber": "125",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cephalosporin Antibacterial [EPC], Cephalosporins [CS]",
"Status": "Active",
"LastUpdate": "2024-05-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20060329",
"SamplePackage": "N",
"IndicationAndUsage": "Cefuroxime axetil tablets are a cephalosporin antibacterial drug indicated for the treatment of the following infections due to susceptible bacteria: (1): 1 Pharyngitis/tonsillitis (adults and pediatric patients) (1.1), 2 Acute bacterial otitis media (pediatric patients) (1.2), 3 Acute bacterial maxillary sinusitis (adults and pediatric patients) (1.3), 4 Acute bacterial exacerbations of chronic bronchitis (adults and pediatric patients 13 years and older) (1.4), 5 Uncomplicated skin and skin-structure infections (adults and pediatric patients 13 years and older) (1.5), 6 Uncomplicated urinary tract infections (adults and pediatric patients 13 years and older) (1.6), 7 Uncomplicated gonorrhea (adults and pediatric patients 13 years and older) (1.7), 8 Early Lyme disease (adults and pediatric patients 13 years and older) (1.8).",
"Description": "Cefuroxime axetil tablets, USP contain cefuroxime as cefuroxime axetil. Cefuroxime axetil is a semisynthetic, cephalosporin antibacterial drug for oral administration. The chemical name of cefuroxime axetil (1-(acetyloxy) ethyl ester of cefuroxime) is (RS)-1-hydroxyethyl (6R,7R)-7-[2-(2-furyl)glyoxyl-amido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]-oct-2-ene-2-carboxylate, 72-(Z)-(O-methyl-oxime), 1-acetate 3-carbamate. Its molecular formula is C20H22N4O10S, and it has a molecular weight of 510.48. Cefuroxime axetil is in the amorphous form and has the following structural formula: Tablets are film-coated and contain the equivalent of 125 mg, 250 mg or 500 mg of cefuroxime as cefuroxime axetil USP. Tablets contain the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hydrogenated vegetable oil, hypromellose, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, and titanium dioxide."
},
{
"NDCCode": "68001-698-88",
"PackageDescription": "7 PATCH in 1 CARTON (68001-698-88) / 24 h in 1 PATCH",
"NDC11Code": "68001-0698-88",
"ProductNDC": "68001-698",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Transdermal System Patch",
"ProprietaryNameSuffix": "Step 2",
"NonProprietaryName": "Nicotine Transdermal System Patch",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20260528",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020076",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "NICOTINE",
"StrengthNumber": "14",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260615",
"SamplePackage": "N",
"IndicationAndUsage": "Reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "68001-698-90",
"PackageDescription": "14 PATCH in 1 CARTON (68001-698-90) / 24 h in 1 PATCH",
"NDC11Code": "68001-0698-90",
"ProductNDC": "68001-698",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine Transdermal System Patch",
"ProprietaryNameSuffix": "Step 2",
"NonProprietaryName": "Nicotine Transdermal System Patch",
"DosageFormName": "PATCH, EXTENDED RELEASE",
"RouteName": "TRANSDERMAL",
"StartMarketingDate": "20260528",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA020076",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "NICOTINE",
"StrengthNumber": "14",
"StrengthUnit": "mg/24h",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-07-13",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260602",
"SamplePackage": "N",
"IndicationAndUsage": "Reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "73352-698-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (73352-698-10) ",
"NDC11Code": "73352-0698-10",
"ProductNDC": "73352-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Evexithroid",
"NonProprietaryName": "Levothyroxine And Liothyronine",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20251012",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Trifluent Pharma, LLC",
"SubstanceName": "LEVOTHYROXINE; LIOTHYRONINE",
"StrengthNumber": "57; 13.5",
"StrengthUnit": "ug/1; ug/1",
"Pharm_Classes": "Thyroxine [CS], Triiodothyronine [CS], l-Thyroxine [EPC], l-Triiodothyronine [EPC]",
"Status": "Active",
"LastUpdate": "2026-10-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20251012",
"SamplePackage": "N",
"IndicationAndUsage": "EvexiTHROID (Thyroid Tablets, USP) are indicated: 1 As replacement or supplemental therapy in patients with hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. This category includes cretinism, myxedema, and ordinary hypothyroidism in patients of any age (children, adults, the elderly), or state (including pregnancy); primary hypothyroidism resulting from functional deficiency, primary atrophy, partial or total absence of thyroid gland, or the effects of surgery, radiation, or drugs, with or without the presence of goiter; and secondary (pituitary), or tertiary (hypothalamic) hypothyroidism (See WARNINGS). , 2 As pituitary TSH suppressants, in the treatment or prevention of various types of euthyroid goiters, including thyroid nodules, subacute or chronic lymphocytic thyroiditis (Hashimoto's), multinodular goiter, and in the management of thyroid cancer.",
"Description": "EvexiTHROID (Thyroid Tablets, USP) (Thyroid Tablets, USP) has not been approved by FDA as a new drug.for oral use is a desiccated thyroid extract that is derived from porcine thyroid glands. EvexiTHROID (Thyroid Tablets, USP) contains both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine). T3 liothyronine is approximately four times as potent as T4 levothyroxine on a microgram for microgram basis. They provide 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) for each 60 mg of the labeled content of thyroid. The inactive ingredients are calcium stearate, colloidal silicon dioxide, mannitol and microcrystalline cellulose. Contains no ingredient made from a gluten containing grain (wheat, barley, rye). EvexiTHROID may have a strong, characteristic odor due to its thyroid extract component. The structural formulas are below."
},
{
"NDCCode": "64896-076-09",
"PackageDescription": "90 PACKET in 1 CARTON (64896-076-09) / 1 GRANULE in 1 PACKET",
"NDC11Code": "64896-0076-09",
"ProductNDC": "64896-076",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "64896-077-09",
"PackageDescription": "90 PACKET in 1 CARTON (64896-077-09) / 1 GRANULE in 1 PACKET",
"NDC11Code": "64896-0077-09",
"ProductNDC": "64896-077",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "64896-078-09",
"PackageDescription": "90 PACKET in 1 CARTON (64896-078-09) / 1 GRANULE in 1 PACKET",
"NDC11Code": "64896-0078-09",
"ProductNDC": "64896-078",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lyvispah",
"NonProprietaryName": "Baclofen",
"DosageFormName": "GRANULE",
"RouteName": "ORAL",
"StartMarketingDate": "20230601",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA215422",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "BACLOFEN",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]",
"Status": "Active",
"LastUpdate": "2024-10-24",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20230601",
"SamplePackage": "N",
"IndicationAndUsage": "LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.",
"Description": "LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol."
},
{
"NDCCode": "64896-083-12",
"PackageDescription": "6 BOTTLE, SPRAY in 1 CARTON (64896-083-12) / 1 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "64896-0083-12",
"ProductNDC": "64896-083",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zomig",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20240715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021450",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "2.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240715",
"SamplePackage": "N",
"IndicationAndUsage": "ZOMIG Nasal Spray is indicated for the acute treatment of migraine with or without aura in adults and pediatric patients 12 years of age and older. Limitations of Use: 1 Only use ZOMIG if a clear diagnosis of migraine has been established. If a patient has no response to ZOMIG treatment for the first migraine attack, reconsider the diagnosis of migraine before ZOMIG is administered to treat any subsequent attacks., 2 ZOMIG is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of ZOMIG have not been established for cluster headache., 4 Not recommended in patients with moderate or severe hepatic impairment [see Dosage and Administration (2.2)].",
"Description": "ZOMIG® (zolmitriptan) Nasal Spray contains zolmitriptan, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino) ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to almost white powder that is readily soluble in water. ZOMIG Nasal Spray is supplied as a clear to pale yellow solution of zolmitriptan, buffered to a pH 5.0. Each ZOMIG Nasal Spray contains 2.5 mg or 5 mg of zolmitriptan in a 100-μL unit dose aqueous buffered solution containing citric acid, anhydrous, USP, disodium phosphate dodecahydrate USP and purified water USP. ZOMIG Nasal Spray is hypertonic. The osmolarity of ZOMIG Nasal Spray for 2.5 mg is 360 to 420 mOsmol, and for 5 mg is 420 to 470 mOsmol."
},
{
"NDCCode": "64896-084-12",
"PackageDescription": "6 BOTTLE, SPRAY in 1 CARTON (64896-084-12) / 1 SPRAY, METERED in 1 BOTTLE, SPRAY",
"NDC11Code": "64896-0084-12",
"ProductNDC": "64896-084",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Zomig",
"NonProprietaryName": "Zolmitriptan",
"DosageFormName": "SPRAY, METERED",
"RouteName": "NASAL",
"StartMarketingDate": "20240715",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA021450",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "ZOLMITRIPTAN",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2026-08-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240715",
"SamplePackage": "N",
"IndicationAndUsage": "ZOMIG Nasal Spray is indicated for the acute treatment of migraine with or without aura in adults and pediatric patients 12 years of age and older. Limitations of Use: 1 Only use ZOMIG if a clear diagnosis of migraine has been established. If a patient has no response to ZOMIG treatment for the first migraine attack, reconsider the diagnosis of migraine before ZOMIG is administered to treat any subsequent attacks., 2 ZOMIG is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of ZOMIG have not been established for cluster headache., 4 Not recommended in patients with moderate or severe hepatic impairment [see Dosage and Administration (2.2)].",
"Description": "ZOMIG® (zolmitriptan) Nasal Spray contains zolmitriptan, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino) ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to almost white powder that is readily soluble in water. ZOMIG Nasal Spray is supplied as a clear to pale yellow solution of zolmitriptan, buffered to a pH 5.0. Each ZOMIG Nasal Spray contains 2.5 mg or 5 mg of zolmitriptan in a 100-μL unit dose aqueous buffered solution containing citric acid, anhydrous, USP, disodium phosphate dodecahydrate USP and purified water USP. ZOMIG Nasal Spray is hypertonic. The osmolarity of ZOMIG Nasal Spray for 2.5 mg is 360 to 420 mOsmol, and for 5 mg is 420 to 470 mOsmol."
},
{
"NDCCode": "64896-402-01",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (64896-402-01) ",
"NDC11Code": "64896-0402-01",
"ProductNDC": "64896-402",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ongentys",
"NonProprietaryName": "Opicapone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240405",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212489",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OPICAPONE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "N",
"IndicationAndUsage": "ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.",
"Description": "ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide."
},
{
"NDCCode": "64896-403-01",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (64896-403-01) ",
"NDC11Code": "64896-0403-01",
"ProductNDC": "64896-403",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ongentys",
"NonProprietaryName": "Opicapone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240405",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212489",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OPICAPONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "N",
"IndicationAndUsage": "ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.",
"Description": "ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64896-698-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-13) </PackageDescription>
<NDC11Code>64896-0698-13</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-01) </PackageDescription>
<NDC11Code>64896-0698-01</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-03) </PackageDescription>
<NDC11Code>64896-0698-03</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-08) </PackageDescription>
<NDC11Code>64896-0698-08</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-13) </PackageDescription>
<NDC11Code>64896-0695-13</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-696-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-13) </PackageDescription>
<NDC11Code>64896-0696-13</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-697-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-13) </PackageDescription>
<NDC11Code>64896-0697-13</NDC11Code>
<ProductNDC>64896-697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-699-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-13) </PackageDescription>
<NDC11Code>64896-0699-13</NDC11Code>
<ProductNDC>64896-699</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) </PackageDescription>
<NDC11Code>64896-0700-13</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-701-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-13) </PackageDescription>
<NDC11Code>64896-0701-13</NDC11Code>
<ProductNDC>64896-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>16571-698-01</NDCCode>
<PackageDescription>100 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-01) </PackageDescription>
<NDC11Code>16571-0698-01</NDC11Code>
<ProductNDC>16571-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201921</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16571-698-09</NDCCode>
<PackageDescription>90 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-09) </PackageDescription>
<NDC11Code>16571-0698-09</NDC11Code>
<ProductNDC>16571-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201921</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>16571-698-50</NDCCode>
<PackageDescription>500 CAPSULE, DELAYED RELEASE in 1 BOTTLE (16571-698-50) </PackageDescription>
<NDC11Code>16571-0698-50</NDC11Code>
<ProductNDC>16571-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lansoprazole</ProprietaryName>
<NonProprietaryName>Lansoprazole</NonProprietaryName>
<DosageFormName>CAPSULE, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20200111</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201921</ApplicationNumber>
<LabelerName>Rising Pharma Holdings, Inc.</LabelerName>
<SubstanceName>LANSOPRAZOLE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Inhibition Gastric Acid Secretion [PE], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-11-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200111</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lansoprazole delayed-release capsules are proton pump inhibitors (PPIs) indicated for the: 1 Treatment of active duodenal ulcer in adults. (1.1), 2 Eradication of H. pylori to reduce the risk of duodenal ulcer recurrence in adults. (1.2), 3 Maintenance of healed duodenal ulcers in adults. (1.3), 4 Treatment of active benign gastric ulcer in adults. (1.4), 5 Healing of non steroidal anti-inflammatory drugs (NSAID)-associated gastric ulcer in adults. (1.5), 6 Risk reduction of NSAID-associated gastric ulcer in adults. (1.6), 7 Treatment of symptomatic gastroesophageal reflux disease (GERD) in adults and pediatric patients 1 year of age and older. (1.7), 8 Treatment of erosive esophagitis (EE) in adults and pediatric patients 1 year of age and older. (1.8), 9 Maintenance of healing of EE in adults. (1.9), 10 Pathological hypersecretory conditions, including Zollinger-Ellison syndrome (ZES) in adults. (1.10).</IndicationAndUsage>
<Description>The active ingredient in lansoprazole delayed-release capsules 15 mg and 30 mg is lansoprazole, a substituted benzimidazole, 2-[[[3-methyl-4-(2,2,2-trifluoroethoxy)-2-pyridyl]methyl]sulfinyl] benzimidazole, a compound that inhibits gastric acid secretion. Its empirical formula is C16H14F3N3O2S with a molecular weight of 369.37. Lansoprazole has the following structure. Lansoprazole is a white to brownish-white odorless crystalline powder which melts with decomposition at approximately 166°C. Lansoprazole is freely soluble in dimethylformamide; soluble in methanol; sparingly soluble in ethanol; slightly soluble in ethyl acetate, dichloromethane and acetonitrile; very slightly soluble in ether; and practically insoluble in hexane and water. Lansoprazole is stable when exposed to light for up to two months. The rate of degradation of the compound in aqueous solution increases with decreasing pH. The degradation half-life of the drug substance in aqueous solution at 25°C is approximately 0.5 hour at pH 5.0 and approximately 18 hours at pH 7.0. Lansoprazole is supplied in delayed-release capsule form, for oral administration in two strengths 15 mg and 30 mg. Lansoprazole delayed-release capsules are available in two strengths: 15 mg and 30 mg of lansoprazole per capsule. Each delayed-release capsule contains lansoprazole delayed-release pellets 8.5% consisting of 15 mg or 30 mg of lansoprazole (active ingredient) and the following inactive ingredients: acetone, hypromellose, isopropyl alcohol, light magnesium carbonate, methacrylic acid copolymer, polyethylene glycol, polysorbate 80, sugar spheres (consists of sucrose and corn starch), talc and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 15 mg contains D&C Red 28, FD&C Blue 1, FD&C Green 3, FD&C Red 40, gelatin, purified water and titanium dioxide. The hard gelatin capsule shell for lansoprazole delayed-release capsules 30 mg contains D&C Red 28, FD&C Blue 1, FD&C Red 40, gelatin, purified water and titanium dioxide. The white printing ink contains ammonia, potassium hydroxide, propylene glycol, shellac and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>37808-698-34</NDCCode>
<PackageDescription>237 mL in 1 BOTTLE (37808-698-34)</PackageDescription>
<NDC11Code>37808-0698-34</NDC11Code>
<ProductNDC>37808-698</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Rx Act Cough And Sore Throat</ProprietaryName>
<NonProprietaryName>Acetaminophen, Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060828</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>H E B</LabelerName>
<SubstanceName>ACETAMINOPHEN; DEXTROMETHORPHAN HYDROBROMIDE</SubstanceName>
<StrengthNumber>500; 15</StrengthNumber>
<StrengthUnit>mg/15mL; mg/15mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2017-12-13</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>43598-698-11</NDCCode>
<PackageDescription>1 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-11) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0698-11</NDC11Code>
<ProductNDC>43598-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211941</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230420</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>43598-698-58</NDCCode>
<PackageDescription>10 VIAL, SINGLE-DOSE in 1 CARTON (43598-698-58) / 1 mL in 1 VIAL, SINGLE-DOSE</PackageDescription>
<NDC11Code>43598-0698-58</NDC11Code>
<ProductNDC>43598-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Carboprost Tromethamine</ProprietaryName>
<NonProprietaryName>Carboprost Tromethamine</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAMUSCULAR</RouteName>
<StartMarketingDate>20190702</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA211941</ApplicationNumber>
<LabelerName>Dr. Reddy's Laboratories Inc.</LabelerName>
<SubstanceName>CARBOPROST TROMETHAMINE</SubstanceName>
<StrengthNumber>250</StrengthNumber>
<StrengthUnit>ug/mL</StrengthUnit>
<Pharm_Classes>Prostaglandin Analog [EPC], Prostaglandins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-04-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190702</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Carboprost tromethamine injection, USP is indicated for aborting pregnancy between the 13th and 20th weeks of gestation as calculated from the first day of the last normal menstrual period and in the following conditions related to second trimester abortion. 1. Failure of expulsion of the fetus during the course of treatment by another method;. 2. Premature rupture of membranes in intrauterine methods with loss of drug and insufficient or absent uterine activity;. 3. Requirement of a repeat intrauterine instillation of drug for expulsion of the fetus;. 4. Inadvertent or spontaneous rupture of membranes in the presence of a previable fetus and absence of adequate activity for expulsion. Carboprost tromethamine injection is indicated for the treatment of postpartum hemorrhage due to uterine atony which has not responded to conventional methods of management. Prior treatment should include the use of intravenously administered oxytocin, manipulative techniques such as uterine massage and, unless contraindicated, intramuscular ergot preparations. Studies have shown that in such cases, the use of carboprost tromethamine injection has resulted in satisfactory control of hemorrhage, although it is unclear whether or not ongoing or delayed effects of previously administered ecbolic agents have contributed to the outcome. In a high proportion of cases, carboprost tromethamine injection used in this manner has resulted in the cessation of life threatening bleeding and the avoidance of emergency surgical intervention.</IndicationAndUsage>
<Description>Sterile. Carboprost tromethamine injection, USP an oxytocic, contains the tromethamine salt of the (15S)15 methyl analogue of naturally occurring prostaglandin F2α in a solution suitable for intramuscular injection. Carboprost tromethamine injection, USP is the established name for the active ingredient carboprost tromethamine, USP. Four other chemical names are. 1. (15S)-15-methyl prostaglandin F2α tromethamine salt. 2. 7-(3α,5α-dihydroxy-2ß-[(3S)-3-hydroxy-3-methyl-trans-1-octenyl]-1α cyclopentyl]-cis-5-heptenoic acid compound with 2-amino-2-(hydroxymethyl) 1,3-propanediol. 3. (15S)-9α,11α,15-trihydroxy-15-methylprosta-cis-5, trans-13-dienoic acid tromethamine salt. 4. (15S)-15-methyl PGF2α-THAM. The structural formula is represented below. The molecular formula is C25H47O8N. The molecular weight of carboprost tromethamine, USP is 489.64. It is a white to slightly off-white crystalline powder. It generally melts between 95° and 105° C, depending on the rate of heating. Carboprost tromethamine, USP dissolves readily in water at room temperature at a concentration greater than 75 mg/mL. Each mL of carboprost tromethamine injection, USP contains carboprost tromethamine, USP equivalent to 250 mcg of carboprost, 83 mcg tromethamine, 9 mg sodium chloride, and 9.45 mg benzyl alcohol added as preservative. When necessary, pH is adjusted with sodium hydroxide and/or hydrochloric acid. The solution is sterile.</Description>
</NDC>
<NDC>
<NDCCode>50268-698-15</NDCCode>
<PackageDescription>50 BLISTER PACK in 1 BOX, UNIT-DOSE (50268-698-15) > 1 TABLET, FILM COATED in 1 BLISTER PACK (50268-698-11) </PackageDescription>
<NDC11Code>50268-0698-15</NDC11Code>
<ProductNDC>50268-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Risperidone</ProprietaryName>
<NonProprietaryName>Risperidone</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20140827</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA078040</ApplicationNumber>
<LabelerName>AvPAK</LabelerName>
<SubstanceName>RISPERIDONE</SubstanceName>
<StrengthNumber>3</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Atypical Antipsychotic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-04-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20140827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>62037-698-30</NDCCode>
<PackageDescription>30 CAPSULE, EXTENDED RELEASE in 1 BOTTLE, PLASTIC (62037-698-30) </PackageDescription>
<NDC11Code>62037-0698-30</NDC11Code>
<ProductNDC>62037-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Taztia</ProprietaryName>
<ProprietaryNameSuffix>Xt</ProprietaryNameSuffix>
<NonProprietaryName>Diltiazem Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20030410</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075401</ApplicationNumber>
<LabelerName>Actavis Pharma, Inc.</LabelerName>
<SubstanceName>DILTIAZEM HYDROCHLORIDE</SubstanceName>
<StrengthNumber>240</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Calcium Channel Antagonists [MoA], Calcium Channel Blocker [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-06-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20030410</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Diltiazem hydrochloride extended-release capsules (once-a-day dosage) are indicated for the treatment of hypertension. It may be used alone or in combination with other antihypertensive medications.</IndicationAndUsage>
<Description>Diltiazem hydrochloride, USP is a calcium ion cellular influx inhibitor (slow channel blocker). Chemically, diltiazem hydrochloride is 1,5-Benzothiazepin-4(5H)-one, 3-(acetyloxy)-5-[2-(dimethylamino)ethyl]-2, 3-dihydro-2-(4-methoxyphenyl)-, monohydrochloride, (+)-cis-. The chemical structure is. Diltiazem hydrochloride, USP is a white to off-white crystalline powder with a bitter taste. It is soluble in water, methanol and chloroform and has a molecular weight of 450.98. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) contain diltiazem hydrochloride in extended-release pellets at doses of 120, 180, 240, 300 and 360 mg. Diltiazem hydrochloride extend-release capsules, USP (once-a-day dosage) also contains: black iron oxide, corn starch, ethylcellulose, D&C Yellow #10 Aluminum Lake, FD&C Blue #1 Aluminum Lake, FD&C Blue #2 Aluminum Lake, FD&C Red #40 Aluminum Lake, gelatin, hypromellose 2910, magnesium stearate, nonoxynol 100, pharmaceutical glaze, polysorbate 80, polyacrylic dispersion, povidone, propylene glycol, sucrose, talc and titanium dioxide. The 120 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 180 mg capsules also contain: D&C Yellow #10, FD&C Blue #1 and FD&C Yellow #6. The 240 mg capsules also contain: D&C Red #28, FD&C Blue #1 and FD&C Red #40. The 300 mg capsules also contain: D&C Red #28, D&C Yellow #10, FD&C Blue #1, FD&C Red #40 and FD&C Yellow #6. The 360 mg capsules also contain: FD&C Blue #1. For oral administration. Meets USP requirements for dissolution test 15.</Description>
</NDC>
<NDC>
<NDCCode>65862-698-20</NDCCode>
<PackageDescription>20 TABLET in 1 BOTTLE (65862-698-20) </PackageDescription>
<NDC11Code>65862-0698-20</NDC11Code>
<ProductNDC>65862-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Axetil</ProprietaryName>
<NonProprietaryName>Cefuroxime Axetil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065308</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>CEFUROXIME AXETIL</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime axetil tablets are a cephalosporin antibacterial drug indicated for the treatment of the following infections due to susceptible bacteria: (1): 1 Pharyngitis/tonsillitis (adults and pediatric patients) (1.1), 2 Acute bacterial otitis media (pediatric patients) (1.2), 3 Acute bacterial maxillary sinusitis (adults and pediatric patients) (1.3), 4 Acute bacterial exacerbations of chronic bronchitis (adults and pediatric patients 13 years and older) (1.4), 5 Uncomplicated skin and skin-structure infections (adults and pediatric patients 13 years and older) (1.5), 6 Uncomplicated urinary tract infections (adults and pediatric patients 13 years and older) (1.6), 7 Uncomplicated gonorrhea (adults and pediatric patients 13 years and older) (1.7), 8 Early Lyme disease (adults and pediatric patients 13 years and older) (1.8).</IndicationAndUsage>
<Description>Cefuroxime axetil tablets, USP contain cefuroxime as cefuroxime axetil. Cefuroxime axetil is a semisynthetic, cephalosporin antibacterial drug for oral administration. The chemical name of cefuroxime axetil (1-(acetyloxy) ethyl ester of cefuroxime) is (RS)-1-hydroxyethyl (6R,7R)-7-[2-(2-furyl)glyoxyl-amido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]-oct-2-ene-2-carboxylate, 72-(Z)-(O-methyl-oxime), 1-acetate 3-carbamate. Its molecular formula is C20H22N4O10S, and it has a molecular weight of 510.48. Cefuroxime axetil is in the amorphous form and has the following structural formula: Tablets are film-coated and contain the equivalent of 125 mg, 250 mg or 500 mg of cefuroxime as cefuroxime axetil USP. Tablets contain the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hydrogenated vegetable oil, hypromellose, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>65862-698-60</NDCCode>
<PackageDescription>60 TABLET in 1 BOTTLE (65862-698-60) </PackageDescription>
<NDC11Code>65862-0698-60</NDC11Code>
<ProductNDC>65862-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Cefuroxime Axetil</ProprietaryName>
<NonProprietaryName>Cefuroxime Axetil</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20060329</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA065308</ApplicationNumber>
<LabelerName>Aurobindo Pharma Limited</LabelerName>
<SubstanceName>CEFUROXIME AXETIL</SubstanceName>
<StrengthNumber>125</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cephalosporin Antibacterial [EPC], Cephalosporins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-05-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20060329</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Cefuroxime axetil tablets are a cephalosporin antibacterial drug indicated for the treatment of the following infections due to susceptible bacteria: (1): 1 Pharyngitis/tonsillitis (adults and pediatric patients) (1.1), 2 Acute bacterial otitis media (pediatric patients) (1.2), 3 Acute bacterial maxillary sinusitis (adults and pediatric patients) (1.3), 4 Acute bacterial exacerbations of chronic bronchitis (adults and pediatric patients 13 years and older) (1.4), 5 Uncomplicated skin and skin-structure infections (adults and pediatric patients 13 years and older) (1.5), 6 Uncomplicated urinary tract infections (adults and pediatric patients 13 years and older) (1.6), 7 Uncomplicated gonorrhea (adults and pediatric patients 13 years and older) (1.7), 8 Early Lyme disease (adults and pediatric patients 13 years and older) (1.8).</IndicationAndUsage>
<Description>Cefuroxime axetil tablets, USP contain cefuroxime as cefuroxime axetil. Cefuroxime axetil is a semisynthetic, cephalosporin antibacterial drug for oral administration. The chemical name of cefuroxime axetil (1-(acetyloxy) ethyl ester of cefuroxime) is (RS)-1-hydroxyethyl (6R,7R)-7-[2-(2-furyl)glyoxyl-amido]-3-(hydroxymethyl)-8-oxo-5-thia-1-azabicyclo[4.2.0]-oct-2-ene-2-carboxylate, 72-(Z)-(O-methyl-oxime), 1-acetate 3-carbamate. Its molecular formula is C20H22N4O10S, and it has a molecular weight of 510.48. Cefuroxime axetil is in the amorphous form and has the following structural formula: Tablets are film-coated and contain the equivalent of 125 mg, 250 mg or 500 mg of cefuroxime as cefuroxime axetil USP. Tablets contain the inactive ingredients colloidal silicon dioxide, croscarmellose sodium, hydrogenated vegetable oil, hypromellose, microcrystalline cellulose, polyethylene glycol, sodium lauryl sulfate, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>68001-698-88</NDCCode>
<PackageDescription>7 PATCH in 1 CARTON (68001-698-88) / 24 h in 1 PATCH</PackageDescription>
<NDC11Code>68001-0698-88</NDC11Code>
<ProductNDC>68001-698</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Transdermal System Patch</ProprietaryName>
<ProprietaryNameSuffix>Step 2</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine Transdermal System Patch</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20260528</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020076</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260615</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68001-698-90</NDCCode>
<PackageDescription>14 PATCH in 1 CARTON (68001-698-90) / 24 h in 1 PATCH</PackageDescription>
<NDC11Code>68001-0698-90</NDC11Code>
<ProductNDC>68001-698</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine Transdermal System Patch</ProprietaryName>
<ProprietaryNameSuffix>Step 2</ProprietaryNameSuffix>
<NonProprietaryName>Nicotine Transdermal System Patch</NonProprietaryName>
<DosageFormName>PATCH, EXTENDED RELEASE</DosageFormName>
<RouteName>TRANSDERMAL</RouteName>
<StartMarketingDate>20260528</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA020076</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>14</StrengthNumber>
<StrengthUnit>mg/24h</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-07-13</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260602</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>73352-698-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (73352-698-10) </PackageDescription>
<NDC11Code>73352-0698-10</NDC11Code>
<ProductNDC>73352-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Evexithroid</ProprietaryName>
<NonProprietaryName>Levothyroxine And Liothyronine</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20251012</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Trifluent Pharma, LLC</LabelerName>
<SubstanceName>LEVOTHYROXINE; LIOTHYRONINE</SubstanceName>
<StrengthNumber>57; 13.5</StrengthNumber>
<StrengthUnit>ug/1; ug/1</StrengthUnit>
<Pharm_Classes>Thyroxine [CS], Triiodothyronine [CS], l-Thyroxine [EPC], l-Triiodothyronine [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-10-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20251012</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>EvexiTHROID (Thyroid Tablets, USP) are indicated: 1 As replacement or supplemental therapy in patients with hypothyroidism of any etiology, except transient hypothyroidism during the recovery phase of subacute thyroiditis. This category includes cretinism, myxedema, and ordinary hypothyroidism in patients of any age (children, adults, the elderly), or state (including pregnancy); primary hypothyroidism resulting from functional deficiency, primary atrophy, partial or total absence of thyroid gland, or the effects of surgery, radiation, or drugs, with or without the presence of goiter; and secondary (pituitary), or tertiary (hypothalamic) hypothyroidism (See WARNINGS). , 2 As pituitary TSH suppressants, in the treatment or prevention of various types of euthyroid goiters, including thyroid nodules, subacute or chronic lymphocytic thyroiditis (Hashimoto's), multinodular goiter, and in the management of thyroid cancer.</IndicationAndUsage>
<Description>EvexiTHROID (Thyroid Tablets, USP) (Thyroid Tablets, USP) has not been approved by FDA as a new drug.for oral use is a desiccated thyroid extract that is derived from porcine thyroid glands. EvexiTHROID (Thyroid Tablets, USP) contains both tetraiodothyronine sodium (T4 levothyroxine) and triiodothyronine sodium (T3 liothyronine). T3 liothyronine is approximately four times as potent as T4 levothyroxine on a microgram for microgram basis. They provide 38 mcg levothyroxine (T4) and 9 mcg liothyronine (T3) for each 60 mg of the labeled content of thyroid. The inactive ingredients are calcium stearate, colloidal silicon dioxide, mannitol and microcrystalline cellulose. Contains no ingredient made from a gluten containing grain (wheat, barley, rye). EvexiTHROID may have a strong, characteristic odor due to its thyroid extract component. The structural formulas are below.</Description>
</NDC>
<NDC>
<NDCCode>64896-076-09</NDCCode>
<PackageDescription>90 PACKET in 1 CARTON (64896-076-09) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>64896-0076-09</NDC11Code>
<ProductNDC>64896-076</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>64896-077-09</NDCCode>
<PackageDescription>90 PACKET in 1 CARTON (64896-077-09) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>64896-0077-09</NDC11Code>
<ProductNDC>64896-077</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>64896-078-09</NDCCode>
<PackageDescription>90 PACKET in 1 CARTON (64896-078-09) / 1 GRANULE in 1 PACKET</PackageDescription>
<NDC11Code>64896-0078-09</NDC11Code>
<ProductNDC>64896-078</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lyvispah</ProprietaryName>
<NonProprietaryName>Baclofen</NonProprietaryName>
<DosageFormName>GRANULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20230601</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA215422</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>BACLOFEN</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>GABA A Agonists [MoA], GABA B Agonists [MoA], gamma-Aminobutyric Acid-ergic Agonist [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-10-24</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20230601</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>LYVISPAH is indicated for the treatment of spasticity resulting from multiple sclerosis, particularly for the relief of flexor spasms and concomitant pain, clonus, and muscular rigidity. LYVISPAH may also be of some value in patients with spinal cord injuries and other spinal cord diseases. Limitations of Use. LYVISPAH is not indicated in the treatment of skeletal muscle spasm resulting from rheumatic disorders.</IndicationAndUsage>
<Description>LYVISPAH (baclofen) oral granules is a gamma-aminobutyric acid (GABA-ergic) agonist available as 5 mg, 10 mg, or 20 mg of baclofen oral granules in a packet. Its chemical name is 4-amino-3-(4- chlorophenyl)-butanoic acid and its structural formula is. Molecular formula is C10H12ClNO2 Molecular Weight is 213.66. Baclofen USP is a white to off-white, odorless or practically odorless crystalline powder. It is slightly soluble in water, very slightly soluble in methanol, and insoluble in chloroform. LYVISPAH (baclofen) oral granules inactive ingredients include amino methacrylate copolymer, calcium stearate, colloidal silicon dioxide, crospovidone, hypromellose, mannitol, saccharin sodium, strawberry flavor, talc, and xylitol.</Description>
</NDC>
<NDC>
<NDCCode>64896-083-12</NDCCode>
<PackageDescription>6 BOTTLE, SPRAY in 1 CARTON (64896-083-12) / 1 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>64896-0083-12</NDC11Code>
<ProductNDC>64896-083</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zomig</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20240715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021450</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>2.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOMIG Nasal Spray is indicated for the acute treatment of migraine with or without aura in adults and pediatric patients 12 years of age and older. Limitations of Use: 1 Only use ZOMIG if a clear diagnosis of migraine has been established. If a patient has no response to ZOMIG treatment for the first migraine attack, reconsider the diagnosis of migraine before ZOMIG is administered to treat any subsequent attacks., 2 ZOMIG is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of ZOMIG have not been established for cluster headache., 4 Not recommended in patients with moderate or severe hepatic impairment [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>ZOMIG® (zolmitriptan) Nasal Spray contains zolmitriptan, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino) ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to almost white powder that is readily soluble in water. ZOMIG Nasal Spray is supplied as a clear to pale yellow solution of zolmitriptan, buffered to a pH 5.0. Each ZOMIG Nasal Spray contains 2.5 mg or 5 mg of zolmitriptan in a 100-μL unit dose aqueous buffered solution containing citric acid, anhydrous, USP, disodium phosphate dodecahydrate USP and purified water USP. ZOMIG Nasal Spray is hypertonic. The osmolarity of ZOMIG Nasal Spray for 2.5 mg is 360 to 420 mOsmol, and for 5 mg is 420 to 470 mOsmol.</Description>
</NDC>
<NDC>
<NDCCode>64896-084-12</NDCCode>
<PackageDescription>6 BOTTLE, SPRAY in 1 CARTON (64896-084-12) / 1 SPRAY, METERED in 1 BOTTLE, SPRAY</PackageDescription>
<NDC11Code>64896-0084-12</NDC11Code>
<ProductNDC>64896-084</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Zomig</ProprietaryName>
<NonProprietaryName>Zolmitriptan</NonProprietaryName>
<DosageFormName>SPRAY, METERED</DosageFormName>
<RouteName>NASAL</RouteName>
<StartMarketingDate>20240715</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA021450</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>ZOLMITRIPTAN</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Serotonin 1b Receptor Agonists [MoA], Serotonin 1d Receptor Agonists [MoA], Serotonin-1b and Serotonin-1d Receptor Agonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2026-08-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240715</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ZOMIG Nasal Spray is indicated for the acute treatment of migraine with or without aura in adults and pediatric patients 12 years of age and older. Limitations of Use: 1 Only use ZOMIG if a clear diagnosis of migraine has been established. If a patient has no response to ZOMIG treatment for the first migraine attack, reconsider the diagnosis of migraine before ZOMIG is administered to treat any subsequent attacks., 2 ZOMIG is not indicated for the prevention of migraine attacks., 3 Safety and effectiveness of ZOMIG have not been established for cluster headache., 4 Not recommended in patients with moderate or severe hepatic impairment [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>ZOMIG® (zolmitriptan) Nasal Spray contains zolmitriptan, which is a selective 5-hydroxytryptamine 1B/1D (5-HT1B/1D) receptor agonist. Zolmitriptan is chemically designated as (S)-4-[[3-[2-(dimethylamino) ethyl]-1H-indol-5-yl]methyl]-2-oxazolidinone and has the following chemical structure. The empirical formula is C16H21N3O2, representing a molecular weight of 287.36. Zolmitriptan is a white to almost white powder that is readily soluble in water. ZOMIG Nasal Spray is supplied as a clear to pale yellow solution of zolmitriptan, buffered to a pH 5.0. Each ZOMIG Nasal Spray contains 2.5 mg or 5 mg of zolmitriptan in a 100-μL unit dose aqueous buffered solution containing citric acid, anhydrous, USP, disodium phosphate dodecahydrate USP and purified water USP. ZOMIG Nasal Spray is hypertonic. The osmolarity of ZOMIG Nasal Spray for 2.5 mg is 360 to 420 mOsmol, and for 5 mg is 420 to 470 mOsmol.</Description>
</NDC>
<NDC>
<NDCCode>64896-402-01</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (64896-402-01) </PackageDescription>
<NDC11Code>64896-0402-01</NDC11Code>
<ProductNDC>64896-402</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ongentys</ProprietaryName>
<NonProprietaryName>Opicapone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240405</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212489</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OPICAPONE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.</IndicationAndUsage>
<Description>ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>64896-403-01</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (64896-403-01) </PackageDescription>
<NDC11Code>64896-0403-01</NDC11Code>
<ProductNDC>64896-403</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ongentys</ProprietaryName>
<NonProprietaryName>Opicapone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240405</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212489</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OPICAPONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.</IndicationAndUsage>
<Description>ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide.</Description>
</NDC>
</NDCList>