{
"NDC": [
{
"NDCCode": "64896-700-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-03) ",
"NDC11Code": "64896-0700-03",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-01",
"PackageDescription": "100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-01) ",
"NDC11Code": "64896-0700-01",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-08",
"PackageDescription": "30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-08) ",
"NDC11Code": "64896-0700-08",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-700-13",
"PackageDescription": "60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) ",
"NDC11Code": "64896-0700-13",
"ProductNDC": "64896-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-403-03",
"PackageDescription": "30 CAPSULE in 1 BOTTLE (64896-403-03) ",
"NDC11Code": "64896-0403-03",
"ProductNDC": "64896-403",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Ongentys",
"NonProprietaryName": "Opicapone",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20240405",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA212489",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OPICAPONE",
"StrengthNumber": "50",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]",
"Status": "Active",
"LastUpdate": "2025-10-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20240405",
"SamplePackage": "Y",
"IndicationAndUsage": "ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.",
"Description": "ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide."
},
{
"NDCCode": "64896-695-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-03) ",
"NDC11Code": "64896-0695-03",
"ProductNDC": "64896-695",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-696-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-03) ",
"NDC11Code": "64896-0696-03",
"ProductNDC": "64896-696",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "7.5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-697-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-03) ",
"NDC11Code": "64896-0697-03",
"ProductNDC": "64896-697",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "10",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-698-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-03) ",
"NDC11Code": "64896-0698-03",
"ProductNDC": "64896-698",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-699-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-03) ",
"NDC11Code": "64896-0699-03",
"ProductNDC": "64896-699",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "64896-701-03",
"PackageDescription": "1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-03) ",
"NDC11Code": "64896-0701-03",
"ProductNDC": "64896-701",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxymorphone Hydrochloride",
"NonProprietaryName": "Oxymorphone Hydrochloride",
"DosageFormName": "TABLET, FILM COATED, EXTENDED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20130102",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA079087",
"LabelerName": "Amneal Pharmaceuticals LLC",
"SubstanceName": "OXYMORPHONE HYDROCHLORIDE",
"StrengthNumber": "40",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-01-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130102",
"SamplePackage": "N",
"IndicationAndUsage": "Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.",
"Description": "Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP."
},
{
"NDCCode": "10913-010-03",
"PackageDescription": "700 L in 1 CYLINDER (10913-010-03) ",
"NDC11Code": "10913-0010-03",
"ProductNDC": "10913-010",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Nitrogen",
"NonProprietaryName": "Nitrogen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "20100101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA206024",
"LabelerName": "Prest-O-Sales & Service Inc",
"SubstanceName": "NITROGEN",
"StrengthNumber": "99",
"StrengthUnit": "L/100L",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"StartMarketingDatePackage": "20100101",
"SamplePackage": "N"
},
{
"NDCCode": "17271-700-03",
"PackageDescription": "50 BAG in 1 CASE (17271-700-03) / 100 mL in 1 BAG",
"NDC11Code": "17271-0700-03",
"ProductNDC": "17271-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sodium Chloride",
"NonProprietaryName": "Sodium Chloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20180723",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA208122",
"LabelerName": "Becton Dickinson and Company",
"SubstanceName": "SODIUM CHLORIDE",
"StrengthNumber": "450",
"StrengthUnit": "mg/100mL",
"Pharm_Classes": "Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]",
"Status": "Active",
"LastUpdate": "2024-08-07",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20180723",
"SamplePackage": "N",
"IndicationAndUsage": "Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.",
"Description": "0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers."
},
{
"NDCCode": "21749-700-03",
"PackageDescription": "89 mL in 1 BOTTLE (21749-700-03) ",
"NDC11Code": "21749-0700-03",
"ProductNDC": "21749-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Purell Advanced Instant Hand Sanitizer",
"NonProprietaryName": "Alcohol",
"DosageFormName": "LIQUID",
"RouteName": "TOPICAL",
"StartMarketingDate": "20110510",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "GOJO Industries, Inc.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": ".7",
"StrengthUnit": "mL/mL",
"Status": "Deprecated",
"LastUpdate": "2024-12-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20110510",
"SamplePackage": "N",
"IndicationAndUsage": "Hand sanitizer to help reduce bacteria on the skin that could cause disease."
},
{
"NDCCode": "41250-700-05",
"PackageDescription": "3 CONTAINER in 1 CARTON (41250-700-05) / 24 LOZENGE in 1 CONTAINER (41250-700-03) ",
"NDC11Code": "41250-0700-05",
"ProductNDC": "41250-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Nicotine",
"NonProprietaryName": "Nicotine Polacrilex",
"DosageFormName": "LOZENGE",
"RouteName": "ORAL",
"StartMarketingDate": "20090911",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA090711",
"LabelerName": "Meijer Distribution Inc",
"SubstanceName": "NICOTINE",
"StrengthNumber": "2",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20090911",
"SamplePackage": "N",
"IndicationAndUsage": "reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking."
},
{
"NDCCode": "46581-700-03",
"PackageDescription": "3 PATCH in 1 POUCH (46581-700-03) / 4 g in 1 PATCH",
"NDC11Code": "46581-0700-03",
"ProductNDC": "46581-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Salonpas-hot Capsicum",
"NonProprietaryName": "Capsaicin",
"DosageFormName": "PATCH",
"RouteName": "TOPICAL",
"StartMarketingDate": "19981126",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Hisamitsu Pharmaceutical Co., Inc.",
"SubstanceName": "CAPSICUM",
"StrengthNumber": ".025",
"StrengthUnit": "g/100g",
"Pharm_Classes": "Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Vegetable Proteins [CS]",
"Status": "Active",
"LastUpdate": "2025-12-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20181201",
"SamplePackage": "N",
"IndicationAndUsage": "For temporary relief of minor aches and pains of muscles and joints associated with: 1 simple backache, 2 arthritis, 3 strains, 4 bruises, 5 sprains."
},
{
"NDCCode": "50580-412-03",
"PackageDescription": "700 TABLET, FILM COATED in 1 BOTTLE (50580-412-03) ",
"NDC11Code": "50580-0412-03",
"ProductNDC": "50580-412",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Tylenol",
"ProprietaryNameSuffix": "Extra Strength",
"NonProprietaryName": "Acetaminophen",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20160919",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M013",
"LabelerName": "Kenvue Brands LLC",
"SubstanceName": "ACETAMINOPHEN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Status": "Deprecated",
"LastUpdate": "2025-07-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "20160919",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever."
},
{
"NDCCode": "51316-700-03",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (51316-700-03) > 10 BAR, CHEWABLE in 1 BOTTLE, PLASTIC",
"NDC11Code": "51316-0700-03",
"ProductNDC": "51316-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Allergy Relief Diphenhydramine Hci, 25 Mg Antihistamine",
"NonProprietaryName": "Diphenhydramine Hcl",
"DosageFormName": "BAR, CHEWABLE",
"RouteName": "ORAL",
"StartMarketingDate": "20211115",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "CVS Pharmacy",
"SubstanceName": "DIPHENHYDRAMINE HYDROCHLORIDE",
"StrengthNumber": "25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]",
"Status": "Deprecated",
"LastUpdate": "2024-01-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20231231",
"StartMarketingDatePackage": "20211115",
"SamplePackage": "N",
"IndicationAndUsage": "temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: . runny nose. itchy, watery eyes. sneezing. itching of the nose or throat. temporarily relieves these symptoms due to the common cold:. runny nose. sneezing."
},
{
"NDCCode": "51414-700-03",
"PackageDescription": "8 g in 1 PACKAGE (51414-700-03) ",
"NDC11Code": "51414-0700-03",
"ProductNDC": "51414-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Lens Cleaner",
"NonProprietaryName": "Isopropyl Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121128",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part344",
"LabelerName": "Yuyao Jessie Commodity Co.,Ltd.",
"SubstanceName": "ISOPROPYL ALCOHOL",
"StrengthNumber": "15",
"StrengthUnit": "g/100g",
"Status": "Deprecated",
"LastUpdate": "2022-01-04",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20211231",
"StartMarketingDatePackage": "20180105",
"SamplePackage": "N",
"IndicationAndUsage": "Clean smudged and dirty lenses at your convenience with these handy individual packets.Also ,ideal for use on cameras,camcorders,computer&TV screens."
},
{
"NDCCode": "52272-001-03",
"PackageDescription": "700 L in 1 CYLINDER (52272-001-03) ",
"NDC11Code": "52272-0001-03",
"ProductNDC": "52272-001",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxygen",
"NonProprietaryName": "Oxygen",
"DosageFormName": "GAS",
"RouteName": "RESPIRATORY (INHALATION)",
"StartMarketingDate": "19830827",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA205849",
"LabelerName": "Albright Welding Supply Co., Inc.",
"SubstanceName": "OXYGEN",
"StrengthNumber": "990",
"StrengthUnit": "mL/L",
"Status": "Active",
"LastUpdate": "2026-01-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "19830827",
"SamplePackage": "N"
},
{
"NDCCode": "54340-700-03",
"PackageDescription": "946 mL in 1 BOTTLE, PLASTIC (54340-700-03)",
"NDC11Code": "54340-0700-03",
"ProductNDC": "54340-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Dial Country Orchard Antibacterial Soap",
"ProprietaryNameSuffix": "With Moisturizer",
"NonProprietaryName": "Triclosan",
"DosageFormName": "SOLUTION",
"RouteName": "TOPICAL",
"StartMarketingDate": "20090101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "The Dial Corporation",
"SubstanceName": "TRICLOSAN",
"StrengthNumber": ".15",
"StrengthUnit": "mL/1000mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20171231"
},
{
"NDCCode": "57297-700-03",
"PackageDescription": "1 DRUM in 1 DRUM (57297-700-03) / 10 kg in 1 DRUM",
"NDC11Code": "57297-0700-03",
"ProductNDC": "57297-700",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Cefdinir Monohydrate",
"DosageFormName": "POWDER",
"StartMarketingDate": "20200609",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "LUPIN LIMITED",
"SubstanceName": "CEFDINIR MONOHYDRATE",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2024-11-07",
"ListingRecordCertifiedThrough": "20251231",
"StartMarketingDatePackage": "09-JUN-20"
},
{
"NDCCode": "63545-700-03",
"PackageDescription": "1 BOX in 1 BOX (63545-700-03) / 1 BLISTER PACK in 1 BOX (63545-700-02) / 12 [hp_M] in 1 BLISTER PACK (63545-700-01) ",
"NDC11Code": "63545-0700-03",
"ProductNDC": "63545-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Sinecch",
"NonProprietaryName": "Arnica Montana",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20190507",
"MarketingCategoryName": "UNAPPROVED HOMEOPATHIC",
"LabelerName": "Hahnemann Laboratories, Inc. dba Alpine Pharmaceuticals",
"SubstanceName": "ARNICA MONTANA",
"StrengthNumber": "1",
"StrengthUnit": "[hp_M]/[hp_M]",
"Status": "Active",
"LastUpdate": "2025-01-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20190507",
"SamplePackage": "N"
},
{
"NDCCode": "64220-700-03",
"PackageDescription": "25 kg in 1 DRUM (64220-700-03) ",
"NDC11Code": "64220-0700-03",
"ProductNDC": "64220-700",
"ProductTypeName": "BULK INGREDIENT",
"NonProprietaryName": "Gabapentin",
"DosageFormName": "POWDER",
"StartMarketingDate": "20241204",
"MarketingCategoryName": "BULK INGREDIENT",
"LabelerName": "Zhejianghuahai Pharmaceutical.co.,ltd.",
"SubstanceName": "GABAPENTIN",
"StrengthNumber": "1",
"StrengthUnit": "kg/kg",
"Status": "Unfinished",
"LastUpdate": "2025-11-14",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "04-DEC-24"
},
{
"NDCCode": "64679-700-03",
"PackageDescription": "1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (64679-700-03) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (64679-700-02) ",
"NDC11Code": "64679-0700-03",
"ProductNDC": "64679-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxacillin",
"NonProprietaryName": "Oxacillin",
"DosageFormName": "INJECTION, POWDER, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20171124",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA207148",
"LabelerName": "Wockhardt USA LLC.",
"SubstanceName": "OXACILLIN SODIUM",
"StrengthNumber": "10",
"StrengthUnit": "g/100mL",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC], Penicillins [CS]",
"Status": "Active",
"LastUpdate": "2025-10-27",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20171124",
"SamplePackage": "N",
"IndicationAndUsage": "Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (See CLINICAL PHARMACOLOGY-Susceptibility Test Methods). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin for Injection, USP and other antibacterial drugs, Oxacillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.",
"Description": "Oxacillin for Injection, USP is a semisynthetic antibiotic substance derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The pharmacy bulk package contains oxacillin sodium monohydrate equivalent to 10 grams oxacillin. The sodium content is 64 mg (2.8 mEq) per gram of oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram of oxacillin. The chemical name of oxacillin sodium is 4-Thia-1azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19H 18N 3NaO 5SH 2O. The molecular weight is 441.44. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package.) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION."
},
{
"NDCCode": "65601-700-03",
"PackageDescription": "750 mL in 1 BOTTLE, PUMP (65601-700-03) ",
"NDC11Code": "65601-0700-03",
"ProductNDC": "65601-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Alcohol Free Foaming Hand Sanitizer",
"NonProprietaryName": "Benzalkonium Chloride",
"DosageFormName": "SOAP",
"RouteName": "TOPICAL",
"StartMarketingDate": "20121112",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "Betco Corporation, Ltd.",
"SubstanceName": "BENZALKONIUM CHLORIDE",
"StrengthNumber": "1.3",
"StrengthUnit": "mg/mL",
"Status": "Deprecated",
"LastUpdate": "2020-07-17",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20160915",
"SamplePackage": "N"
},
{
"NDCCode": "66902-700-03",
"PackageDescription": ".00178 L in 1 BOTTLE, WITH APPLICATOR (66902-700-03)",
"NDC11Code": "66902-0700-03",
"ProductNDC": "66902-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Zims Arnica Max",
"NonProprietaryName": "Menthol",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20140101",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part348",
"LabelerName": "NATURAL ESSENTIALS, INC.",
"SubstanceName": "MENTHOL",
"StrengthNumber": "20",
"StrengthUnit": "g/L",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "For the temporary relief of minor aches and pains of muscle and joints associated with simple backache, arthritis, strains, bruises and sprains."
},
{
"NDCCode": "68001-700-03",
"PackageDescription": "500 TABLET in 1 BOTTLE (68001-700-03) ",
"NDC11Code": "68001-0700-03",
"ProductNDC": "68001-700",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Labetalol Hydrochloride",
"NonProprietaryName": "Labetalol Hydrochloride",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20260315",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074787",
"LabelerName": "BluePoint Laboratories",
"SubstanceName": "LABETALOL HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2026-06-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20260604",
"SamplePackage": "N",
"IndicationAndUsage": "Labetalol hydrochloride tablets, USP are indicated in the management of hypertension. Labetalol hydrochloride tablets, USP may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.",
"Description": "Labetalol hydrochloride tablets, USP are an adrenergic receptor blocking agent that has both selective alpha 1-adrenergic and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride, USP is a racemate, chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl] salicylamide monohydrochloride, and it has the following structural formula. C 19H 24N 2O 3HCl M.W. 364.87. Labetalol hydrochloride, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R, R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride, USP is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride tablets, USP for oral administration, contains 100 mg, 200 mg, or 300 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, sodium starch glycolate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80. In addition, the 100 mg tablets contain D&C yellow #10 aluminum lake and FD&C yellow # 6 aluminum lake and the 300 mg tablets contain D&C yellow #10 aluminum lake, FD&C yellow # 6 aluminum lake and FD&C blue#1 aluminum lake."
},
{
"NDCCode": "68026-700-03",
"PackageDescription": "3 mL in 1 BOTTLE, PUMP (68026-700-03) ",
"NDC11Code": "68026-0700-03",
"ProductNDC": "68026-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Line Interception Power Duo Day Cream Sunscreen Broad Spectrum Spf 30",
"NonProprietaryName": "Avobenzone, Homosalate, Octisalate, Octocrylene",
"DosageFormName": "CREAM",
"RouteName": "TOPICAL",
"StartMarketingDate": "20160401",
"EndMarketingDate": "20190909",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part352",
"LabelerName": "La Prairie, Inc",
"SubstanceName": "HOMOSALATE; AVOBENZONE; OCTISALATE; OCTOCRYLENE",
"StrengthNumber": "90; 27; 45; 90",
"StrengthUnit": "mg/mL; mg/mL; mg/mL; mg/mL",
"Status": "Deprecated",
"LastUpdate": "2019-09-10",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20160401",
"EndMarketingDatePackage": "20190909",
"SamplePackage": "N"
},
{
"NDCCode": "68196-700-03",
"PackageDescription": "3 BOTTLE in 1 CARTON (68196-700-03) / 14 TABLET, DELAYED RELEASE in 1 BOTTLE",
"NDC11Code": "68196-0700-03",
"ProductNDC": "68196-700",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Members Mark Omeprazole",
"NonProprietaryName": "Omeprazole",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20240207",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA022032",
"LabelerName": "Sam's West Inc",
"SubstanceName": "OMEPRAZOLE",
"StrengthNumber": "20",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]",
"Status": "Active",
"LastUpdate": "2024-03-12",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20240207",
"SamplePackage": "N",
"IndicationAndUsage": "treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64896-700-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-03) </PackageDescription>
<NDC11Code>64896-0700-03</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-01</NDCCode>
<PackageDescription>100 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-01) </PackageDescription>
<NDC11Code>64896-0700-01</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-08</NDCCode>
<PackageDescription>30 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-08) </PackageDescription>
<NDC11Code>64896-0700-08</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-700-13</NDCCode>
<PackageDescription>60 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-700-13) </PackageDescription>
<NDC11Code>64896-0700-13</NDC11Code>
<ProductNDC>64896-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-403-03</NDCCode>
<PackageDescription>30 CAPSULE in 1 BOTTLE (64896-403-03) </PackageDescription>
<NDC11Code>64896-0403-03</NDC11Code>
<ProductNDC>64896-403</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Ongentys</ProprietaryName>
<NonProprietaryName>Opicapone</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240405</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA212489</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OPICAPONE</SubstanceName>
<StrengthNumber>50</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Catechol O-Methyltransferase Inhibitors [MoA], Catechol-O-Methyltransferase Inhibitor [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240405</StartMarketingDatePackage>
<SamplePackage>Y</SamplePackage>
<IndicationAndUsage>ONGENTYS is indicated as adjunctive treatment to levodopa/carbidopa in patients with Parkinson’s disease (PD) experiencing “off” episodes.</IndicationAndUsage>
<Description>ONGENTYS contains opicapone, a peripheral, selective and reversible catechol-O-methyltransferase (COMT) inhibitor. The chemical name of opicapone is 2,5-dichloro-3-(5-(3,4-dihydroxy-5-nitrophenyl)-1,2,4-oxadiazol-3-yl)-4,6-dimethylpyridine-1-oxide with the following structure:. The opicapone molecular formula is C15H10Cl2N4O6; and its molecular weight is 413.17. Opicapone is a yellow powder/crystalline solid with limited aqueous solubility. ONGENTYS capsules are intended for oral administration. Each capsule contains 25 mg or 50 mg of opicapone. ONGENTYS also contains the following inactive ingredients: lactose, magnesium stearate, pregelatinized starch, and sodium starch glycolate. The capsule shells contain: FD&C Blue#2, FD&C Red#3, gelatin, and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>64896-695-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-695-03) </PackageDescription>
<NDC11Code>64896-0695-03</NDC11Code>
<ProductNDC>64896-695</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-696-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-696-03) </PackageDescription>
<NDC11Code>64896-0696-03</NDC11Code>
<ProductNDC>64896-696</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>7.5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-697-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-697-03) </PackageDescription>
<NDC11Code>64896-0697-03</NDC11Code>
<ProductNDC>64896-697</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-698-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-698-03) </PackageDescription>
<NDC11Code>64896-0698-03</NDC11Code>
<ProductNDC>64896-698</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-699-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-699-03) </PackageDescription>
<NDC11Code>64896-0699-03</NDC11Code>
<ProductNDC>64896-699</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>64896-701-03</NDCCode>
<PackageDescription>1000 TABLET, FILM COATED, EXTENDED RELEASE in 1 BOTTLE (64896-701-03) </PackageDescription>
<NDC11Code>64896-0701-03</NDC11Code>
<ProductNDC>64896-701</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxymorphone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxymorphone Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED, EXTENDED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130102</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA079087</ApplicationNumber>
<LabelerName>Amneal Pharmaceuticals LLC</LabelerName>
<SubstanceName>OXYMORPHONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>40</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-01-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130102</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxymorphone Hydrochloride Extended-Release Tablets are indicated for the management of severe and persistent pain that requires an opioid analgesic and that cannot be adequately treated with alternative options, including immediate-release opioids. Limitations of Usage: 1 Because of the risks of addiction, abuse, misuse, overdose and death, which can occur at any dosage or duration and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve opioid analgesics, including Oxymorphone Hydrochloride Extended-Release Tablets, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain., 2 Oxymorphone Hydrochloride Extended-Release Tablets are not indicated as an as-needed (prn) analgesic.</IndicationAndUsage>
<Description>Oxymorphone Hydrochloride Extended-Release Tablets, USP are for oral use and contain oxymorphone, an opioid agonist. Oxymorphone Hydrochloride Extended-Release Tablets, USP are supplied in 5 mg, 7.5 mg, 10 mg, 15 mg, 20 mg, 30 mg and 40 mg tablet strengths for oral administration. The tablet strength describes the amount of oxymorphone hydrochloride per tablet. The tablets contain the following inactive ingredients: microcrystalline cellulose, lactose monohydrate, hypromellose, xanthan gum, magnesium stearate, polyvinyl alcohol - partially hydrolyzed, polyethylene glycol, talc, and titanium dioxide. The 5 mg, 7.5 mg, 10 mg, 20 mg and 40 mg tablets contain FD&C Yellow No. 6 Aluminum Lake. In addition, the 5 mg tablets contain FD&C Blue No. 2 and D&C Red No. 27. The 7.5 mg tablets contain FD&C Blue No. 2 and FD&C Red No. 40. The 10 mg tablets contain FD&C Red No. 40. The 20 mg tablets contain D&C Yellow No. 10 Aluminum Lake, FD&C Blue No. 1, and FD&C Blue No. 2. The 30 mg tablets contain Iron Oxide Yellow and Iron Oxide Black. The 40 mg tablets contain D&C Yellow No. 10 Aluminum Lake. The chemical name of oxymorphone hydrochloride is 4,5α-epoxy-3, 14-dihydroxy-17-methylmorphinan-6-one hydrochloride. Oxymorphone hydrochloride, USP is a white or slightly off-white, odorless powder, which is sparingly soluble in alcohol and ether, but freely soluble in water. The molecular weight of oxymorphone hydrochloride is 337.80. The pKa1 and pKa2 of oxymorphone at 37°C are 8.17 and 9.54, respectively. The octanol/aqueous partition coefficient at 37°C and pH 7.4 is 0.98. The structural formula for oxymorphone hydrochloride is as follows. FDA approved dissolution test specifications differ from USP.</Description>
</NDC>
<NDC>
<NDCCode>10913-010-03</NDCCode>
<PackageDescription>700 L in 1 CYLINDER (10913-010-03) </PackageDescription>
<NDC11Code>10913-0010-03</NDC11Code>
<ProductNDC>10913-010</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Nitrogen</ProprietaryName>
<NonProprietaryName>Nitrogen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>20100101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA206024</ApplicationNumber>
<LabelerName>Prest-O-Sales & Service Inc</LabelerName>
<SubstanceName>NITROGEN</SubstanceName>
<StrengthNumber>99</StrengthNumber>
<StrengthUnit>L/100L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20100101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>17271-700-03</NDCCode>
<PackageDescription>50 BAG in 1 CASE (17271-700-03) / 100 mL in 1 BAG</PackageDescription>
<NDC11Code>17271-0700-03</NDC11Code>
<ProductNDC>17271-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sodium Chloride</ProprietaryName>
<NonProprietaryName>Sodium Chloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20180723</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA208122</ApplicationNumber>
<LabelerName>Becton Dickinson and Company</LabelerName>
<SubstanceName>SODIUM CHLORIDE</SubstanceName>
<StrengthNumber>450</StrengthNumber>
<StrengthUnit>mg/100mL</StrengthUnit>
<Pharm_Classes>Increased Large Intestinal Motility [PE], Inhibition Large Intestine Fluid/Electrolyte Absorption [PE], Osmotic Activity [MoA], Osmotic Laxative [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-08-07</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180723</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Intravenous solutions containing sodium chloride are indicated for parenteral replenishment of fluid and sodium chloride as required by the clinical condition of the patient.</IndicationAndUsage>
<Description>0.45% Sodium Chloride Injection, USP solution is a sterile and nonpyrogenic solution intended for intravenous administration. Each 100 mL of 0.45% Sodium Chloride Injection, USP contains 450 mg sodium chloride in water for injection. Electrolytes per 1,000 mL: sodium 77 mEq; chloride 77 mEq. The osmolarity is 154 mOsmol/L (calc.). The pH in the 100 mL and smaller containers is 6.0; for the 250 mL and larger containers, the pH is 5.6. The pH range is 4.5 to 7.0 for all containers. The solution contains no bacteriostat, antimicrobial agent or added buffer and is intended only as a single-dose injection. When smaller doses are required the unused portion should be discarded. 0.45% Sodium Chloride Injection, USP is a parenteral fluid and electrolyte replenisher. Sodium chloride, USP is chemically designated NaCl, a white crystalline powder freely soluble in water. Water for Injection, USP is chemically designated H2O. The flexible plastic container is fabricated from a specially formulated non-plasticized, film containing polypropylene and thermoplastic elastomers (freeflex® bag). The amount of water that can permeate from the container into the overwrap is insufficient to affect the solution significantly. Solutions in contact with the flexible container can leach out certain of the container's chemical components in very small amounts within the expiration period. The suitability of the container material has been confirmed by tests in animals according to USP biological tests for plastic containers.</Description>
</NDC>
<NDC>
<NDCCode>21749-700-03</NDCCode>
<PackageDescription>89 mL in 1 BOTTLE (21749-700-03) </PackageDescription>
<NDC11Code>21749-0700-03</NDC11Code>
<ProductNDC>21749-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Purell Advanced Instant Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>LIQUID</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20110510</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>GOJO Industries, Inc.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>.7</StrengthNumber>
<StrengthUnit>mL/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2024-12-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20110510</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hand sanitizer to help reduce bacteria on the skin that could cause disease.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>41250-700-05</NDCCode>
<PackageDescription>3 CONTAINER in 1 CARTON (41250-700-05) / 24 LOZENGE in 1 CONTAINER (41250-700-03) </PackageDescription>
<NDC11Code>41250-0700-05</NDC11Code>
<ProductNDC>41250-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Nicotine</ProprietaryName>
<NonProprietaryName>Nicotine Polacrilex</NonProprietaryName>
<DosageFormName>LOZENGE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20090911</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA090711</ApplicationNumber>
<LabelerName>Meijer Distribution Inc</LabelerName>
<SubstanceName>NICOTINE</SubstanceName>
<StrengthNumber>2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cholinergic Nicotinic Agonist [EPC], Nicotine [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20090911</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>reduces withdrawal symptoms, including nicotine craving, associated with quitting smoking.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>46581-700-03</NDCCode>
<PackageDescription>3 PATCH in 1 POUCH (46581-700-03) / 4 g in 1 PATCH</PackageDescription>
<NDC11Code>46581-0700-03</NDC11Code>
<ProductNDC>46581-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Salonpas-hot Capsicum</ProprietaryName>
<NonProprietaryName>Capsaicin</NonProprietaryName>
<DosageFormName>PATCH</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>19981126</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Hisamitsu Pharmaceutical Co., Inc.</LabelerName>
<SubstanceName>CAPSICUM</SubstanceName>
<StrengthNumber>.025</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Pharm_Classes>Allergens [CS], Cell-mediated Immunity [PE], Dietary Proteins [CS], Increased Histamine Release [PE], Non-Standardized Food Allergenic Extract [EPC], Non-Standardized Plant Allergenic Extract [EPC], Plant Proteins [CS], Vegetable Proteins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-12-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20181201</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>For temporary relief of minor aches and pains of muscles and joints associated with: 1 simple backache, 2 arthritis, 3 strains, 4 bruises, 5 sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>50580-412-03</NDCCode>
<PackageDescription>700 TABLET, FILM COATED in 1 BOTTLE (50580-412-03) </PackageDescription>
<NDC11Code>50580-0412-03</NDC11Code>
<ProductNDC>50580-412</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Tylenol</ProprietaryName>
<ProprietaryNameSuffix>Extra Strength</ProprietaryNameSuffix>
<NonProprietaryName>Acetaminophen</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20160919</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M013</ApplicationNumber>
<LabelerName>Kenvue Brands LLC</LabelerName>
<SubstanceName>ACETAMINOPHEN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-07-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160919</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves minor aches and pains due to: the common coldheadachebackacheminor pain of arthritistoothachemuscular achespremenstrual and menstrual cramps. temporarily reduces fever.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51316-700-03</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (51316-700-03) > 10 BAR, CHEWABLE in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>51316-0700-03</NDC11Code>
<ProductNDC>51316-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Allergy Relief Diphenhydramine Hci, 25 Mg Antihistamine</ProprietaryName>
<NonProprietaryName>Diphenhydramine Hcl</NonProprietaryName>
<DosageFormName>BAR, CHEWABLE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211115</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>CVS Pharmacy</LabelerName>
<SubstanceName>DIPHENHYDRAMINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Histamine H1 Receptor Antagonists [MoA], Histamine-1 Receptor Antagonist [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2024-01-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20231231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>temporarily relieves these symptoms due to hay fever or other upper respiratory allergies: . runny nose. itchy, watery eyes. sneezing. itching of the nose or throat. temporarily relieves these symptoms due to the common cold:. runny nose. sneezing.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>51414-700-03</NDCCode>
<PackageDescription>8 g in 1 PACKAGE (51414-700-03) </PackageDescription>
<NDC11Code>51414-0700-03</NDC11Code>
<ProductNDC>51414-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Lens Cleaner</ProprietaryName>
<NonProprietaryName>Isopropyl Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121128</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part344</ApplicationNumber>
<LabelerName>Yuyao Jessie Commodity Co.,Ltd.</LabelerName>
<SubstanceName>ISOPROPYL ALCOHOL</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2022-01-04</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20211231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180105</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clean smudged and dirty lenses at your convenience with these handy individual packets.Also ,ideal for use on cameras,camcorders,computer&TV screens.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>52272-001-03</NDCCode>
<PackageDescription>700 L in 1 CYLINDER (52272-001-03) </PackageDescription>
<NDC11Code>52272-0001-03</NDC11Code>
<ProductNDC>52272-001</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxygen</ProprietaryName>
<NonProprietaryName>Oxygen</NonProprietaryName>
<DosageFormName>GAS</DosageFormName>
<RouteName>RESPIRATORY (INHALATION)</RouteName>
<StartMarketingDate>19830827</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA205849</ApplicationNumber>
<LabelerName>Albright Welding Supply Co., Inc.</LabelerName>
<SubstanceName>OXYGEN</SubstanceName>
<StrengthNumber>990</StrengthNumber>
<StrengthUnit>mL/L</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2026-01-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>19830827</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>54340-700-03</NDCCode>
<PackageDescription>946 mL in 1 BOTTLE, PLASTIC (54340-700-03)</PackageDescription>
<NDC11Code>54340-0700-03</NDC11Code>
<ProductNDC>54340-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Dial Country Orchard Antibacterial Soap</ProprietaryName>
<ProprietaryNameSuffix>With Moisturizer</ProprietaryNameSuffix>
<NonProprietaryName>Triclosan</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20090101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>The Dial Corporation</LabelerName>
<SubstanceName>TRICLOSAN</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>mL/1000mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20171231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>57297-700-03</NDCCode>
<PackageDescription>1 DRUM in 1 DRUM (57297-700-03) / 10 kg in 1 DRUM</PackageDescription>
<NDC11Code>57297-0700-03</NDC11Code>
<ProductNDC>57297-700</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Cefdinir Monohydrate</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20200609</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>LUPIN LIMITED</LabelerName>
<SubstanceName>CEFDINIR MONOHYDRATE</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2024-11-07</LastUpdate>
<ListingRecordCertifiedThrough>20251231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>09-JUN-20</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>63545-700-03</NDCCode>
<PackageDescription>1 BOX in 1 BOX (63545-700-03) / 1 BLISTER PACK in 1 BOX (63545-700-02) / 12 [hp_M] in 1 BLISTER PACK (63545-700-01) </PackageDescription>
<NDC11Code>63545-0700-03</NDC11Code>
<ProductNDC>63545-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Sinecch</ProprietaryName>
<NonProprietaryName>Arnica Montana</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20190507</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED HOMEOPATHIC</MarketingCategoryName>
<LabelerName>Hahnemann Laboratories, Inc. dba Alpine Pharmaceuticals</LabelerName>
<SubstanceName>ARNICA MONTANA</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>[hp_M]/[hp_M]</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-01-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20190507</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>64220-700-03</NDCCode>
<PackageDescription>25 kg in 1 DRUM (64220-700-03) </PackageDescription>
<NDC11Code>64220-0700-03</NDC11Code>
<ProductNDC>64220-700</ProductNDC>
<ProductTypeName>BULK INGREDIENT</ProductTypeName>
<NonProprietaryName>Gabapentin</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<StartMarketingDate>20241204</StartMarketingDate>
<MarketingCategoryName>BULK INGREDIENT</MarketingCategoryName>
<LabelerName>Zhejianghuahai Pharmaceutical.co.,ltd.</LabelerName>
<SubstanceName>GABAPENTIN</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>kg/kg</StrengthUnit>
<Status>Unfinished</Status>
<LastUpdate>2025-11-14</LastUpdate>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>04-DEC-24</StartMarketingDatePackage>
</NDC>
<NDC>
<NDCCode>64679-700-03</NDCCode>
<PackageDescription>1 VIAL, PHARMACY BULK PACKAGE in 1 CARTON (64679-700-03) / 100 mL in 1 VIAL, PHARMACY BULK PACKAGE (64679-700-02) </PackageDescription>
<NDC11Code>64679-0700-03</NDC11Code>
<ProductNDC>64679-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxacillin</ProprietaryName>
<NonProprietaryName>Oxacillin</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20171124</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA207148</ApplicationNumber>
<LabelerName>Wockhardt USA LLC.</LabelerName>
<SubstanceName>OXACILLIN SODIUM</SubstanceName>
<StrengthNumber>10</StrengthNumber>
<StrengthUnit>g/100mL</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC], Penicillins [CS]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-10-27</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20171124</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxacillin is indicated in the treatment of infections caused by penicillinase producing staphylococci which have demonstrated susceptibility to the drug. Cultures and susceptibility tests should be performed initially to determine the causative organism and its susceptibility to the drug (See CLINICAL PHARMACOLOGY-Susceptibility Test Methods). Oxacillin may be used to initiate therapy in suspected cases of resistant staphylococcal infections prior to the availability of susceptibility test results. Oxacillin should not be used in infections caused by organisms susceptible to penicillin G. If the susceptibility tests indicate that the infection is due to an organism other than a resistant Staphylococcus, therapy should not be continued with oxacillin. To reduce the development of drug-resistant bacteria and maintain the effectiveness of Oxacillin for Injection, USP and other antibacterial drugs, Oxacillin for Injection, USP should be used only to treat or prevent infections that are proven or strongly suspected to be caused by susceptible bacteria. When culture and susceptibility information are available, they should be considered in selecting or modifying antibacterial therapy. In the absence of such data, local epidemiology and susceptibility patterns may contribute to the empiric selection of therapy.</IndicationAndUsage>
<Description>Oxacillin for Injection, USP is a semisynthetic antibiotic substance derived from 6-amino-penicillanic acid. It is the sodium salt in a parenteral dosage form. The pharmacy bulk package contains oxacillin sodium monohydrate equivalent to 10 grams oxacillin. The sodium content is 64 mg (2.8 mEq) per gram of oxacillin. The product is buffered with 21 mg dibasic sodium phosphate per gram of oxacillin. The chemical name of oxacillin sodium is 4-Thia-1azabicyclo[3.2.0]heptane-2-carboxylic acid, 3,3-dimethyl-6-[[(5-methyl-3-phenyl-4isoxazolyl)carbonyl]-amino]-7-oxo-, monosodium salt, monohydrate, [2S-(2α,5α,6ß)]. It is resistant to inactivation by the enzyme penicillinase (beta-lactamase). The molecular formula of oxacillin sodium is C 19H 18N 3NaO 5SH 2O. The molecular weight is 441.44. A pharmacy bulk package is a container of a sterile preparation for parenteral use that contains many single doses. The contents of this pharmacy bulk package are intended for use by a pharmacy admixture service for addition to suitable parenteral fluids in the preparation of admixtures for intravenous infusion (See DOSAGE AND ADMINISTRATION, Directions for Proper Use of Pharmacy Bulk Package.) FURTHER DILUTION IS REQUIRED. NOT FOR DIRECT INFUSION.</Description>
</NDC>
<NDC>
<NDCCode>65601-700-03</NDCCode>
<PackageDescription>750 mL in 1 BOTTLE, PUMP (65601-700-03) </PackageDescription>
<NDC11Code>65601-0700-03</NDC11Code>
<ProductNDC>65601-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Alcohol Free Foaming Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Benzalkonium Chloride</NonProprietaryName>
<DosageFormName>SOAP</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20121112</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>Betco Corporation, Ltd.</LabelerName>
<SubstanceName>BENZALKONIUM CHLORIDE</SubstanceName>
<StrengthNumber>1.3</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-07-17</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20160915</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>66902-700-03</NDCCode>
<PackageDescription>.00178 L in 1 BOTTLE, WITH APPLICATOR (66902-700-03)</PackageDescription>
<NDC11Code>66902-0700-03</NDC11Code>
<ProductNDC>66902-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Zims Arnica Max</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20140101</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part348</ApplicationNumber>
<LabelerName>NATURAL ESSENTIALS, INC.</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>g/L</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>For the temporary relief of minor aches and pains of muscle and joints associated with simple backache, arthritis, strains, bruises and sprains.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>68001-700-03</NDCCode>
<PackageDescription>500 TABLET in 1 BOTTLE (68001-700-03) </PackageDescription>
<NDC11Code>68001-0700-03</NDC11Code>
<ProductNDC>68001-700</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Labetalol Hydrochloride</ProprietaryName>
<NonProprietaryName>Labetalol Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20260315</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074787</ApplicationNumber>
<LabelerName>BluePoint Laboratories</LabelerName>
<SubstanceName>LABETALOL HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Adrenergic beta-Antagonists [MoA], beta-Adrenergic Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-06-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20260604</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Labetalol hydrochloride tablets, USP are indicated in the management of hypertension. Labetalol hydrochloride tablets, USP may be used alone or in combination with other antihypertensive agents, especially thiazide and loop diuretics.</IndicationAndUsage>
<Description>Labetalol hydrochloride tablets, USP are an adrenergic receptor blocking agent that has both selective alpha 1-adrenergic and nonselective beta-adrenergic receptor blocking actions in a single substance. Labetalol hydrochloride, USP is a racemate, chemically designated as 5-[1-Hydroxy-2-[(1-methyl-3-phenylpropyl)amino]ethyl] salicylamide monohydrochloride, and it has the following structural formula. C 19H 24N 2O 3HCl M.W. 364.87. Labetalol hydrochloride, USP has two asymmetric centers and therefore exists as a molecular complex of two diastereoisomeric pairs. Dilevalol, the R, R' stereoisomer, makes up 25% of racemic labetalol. Labetalol hydrochloride, USP is a white or off-white crystalline powder, soluble in water. Labetalol hydrochloride tablets, USP for oral administration, contains 100 mg, 200 mg, or 300 mg of labetalol hydrochloride, USP. In addition, each tablet contains the following inactive ingredients: corn starch, lactose monohydrate, magnesium stearate, sodium starch glycolate, hypromellose, titanium dioxide, polyethylene glycol, polysorbate 80. In addition, the 100 mg tablets contain D&C yellow #10 aluminum lake and FD&C yellow # 6 aluminum lake and the 300 mg tablets contain D&C yellow #10 aluminum lake, FD&C yellow # 6 aluminum lake and FD&C blue#1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>68026-700-03</NDCCode>
<PackageDescription>3 mL in 1 BOTTLE, PUMP (68026-700-03) </PackageDescription>
<NDC11Code>68026-0700-03</NDC11Code>
<ProductNDC>68026-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Line Interception Power Duo Day Cream Sunscreen Broad Spectrum Spf 30</ProprietaryName>
<NonProprietaryName>Avobenzone, Homosalate, Octisalate, Octocrylene</NonProprietaryName>
<DosageFormName>CREAM</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20160401</StartMarketingDate>
<EndMarketingDate>20190909</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part352</ApplicationNumber>
<LabelerName>La Prairie, Inc</LabelerName>
<SubstanceName>HOMOSALATE; AVOBENZONE; OCTISALATE; OCTOCRYLENE</SubstanceName>
<StrengthNumber>90; 27; 45; 90</StrengthNumber>
<StrengthUnit>mg/mL; mg/mL; mg/mL; mg/mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2019-09-10</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20160401</StartMarketingDatePackage>
<EndMarketingDatePackage>20190909</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>68196-700-03</NDCCode>
<PackageDescription>3 BOTTLE in 1 CARTON (68196-700-03) / 14 TABLET, DELAYED RELEASE in 1 BOTTLE</PackageDescription>
<NDC11Code>68196-0700-03</NDC11Code>
<ProductNDC>68196-700</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Members Mark Omeprazole</ProprietaryName>
<NonProprietaryName>Omeprazole</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20240207</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA022032</ApplicationNumber>
<LabelerName>Sam's West Inc</LabelerName>
<SubstanceName>OMEPRAZOLE</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2C19 Inhibitors [MoA], Proton Pump Inhibitor [EPC], Proton Pump Inhibitors [MoA]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2024-03-12</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20240207</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>treats frequent heartburn (occurs 2 or more days a week). not intended for immediate relief of heartburn; this drug may take 1 to 4 days for full effect.</IndicationAndUsage>
</NDC>
</NDCList>