{
"NDC": [
{
"NDCCode": "64950-217-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (64950-217-10) ",
"NDC11Code": "64950-0217-10",
"ProductNDC": "64950-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241101",
"EndMarketingDate": "20280228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080937",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20241101",
"EndMarketingDatePackage": "20280228",
"SamplePackage": "N",
"IndicationAndUsage": "Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.",
"Description": "Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light."
},
{
"NDCCode": "64950-217-03",
"PackageDescription": "30 TABLET in 1 BOTTLE (64950-217-03) ",
"NDC11Code": "64950-0217-03",
"ProductNDC": "64950-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241101",
"EndMarketingDate": "20280228",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080937",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "300",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20241101",
"EndMarketingDatePackage": "20271231",
"SamplePackage": "N",
"IndicationAndUsage": "Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.",
"Description": "Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light."
},
{
"NDCCode": "64950-205-10",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (64950-205-10) ",
"NDC11Code": "64950-0205-10",
"ProductNDC": "64950-205",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hycodan",
"NonProprietaryName": "Hydrocodone Bitartrate And Homatropine Methylbromide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20211101",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA005213",
"LabelerName": "Genus Lifesciences Inc.",
"SubstanceName": "HOMATROPINE METHYLBROMIDE; HYDROCODONE BITARTRATE",
"StrengthNumber": "1.5; 5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2026-04-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20211101",
"SamplePackage": "N",
"IndicationAndUsage": "HYCODAN is indicated for the symptomatic relief of cough in adult patients 18 years of age and older.",
"Description": "HYCODAN tablets and oral solution contain hydrocodone, an opioid agonist; and homatropine, a muscarinic antagonist. Each tablet or spoonful (5 mL) of HYCODAN contains 5 mg of hydrocodone bitartrate, USP and 1.5 mg of homatropine methylbromide, USP, for oral administration. HYCODAN tablets also contain: calcium phosphate dibasic, colloidal silicon dioxide, lactose, magnesium stearate, pregelatinized starch and stearic acid. HYCODAN oral solution also contains: anhydrous citric acid, FD&C Red 40, methylparaben, natural and artificial cherry flavor, propylparaben, purified water, sorbitol solution, sodium citrate dihydrate and sucrose."
},
{
"NDCCode": "64950-206-10",
"PackageDescription": "100 TABLET in 1 BOTTLE, PLASTIC (64950-206-10) ",
"NDC11Code": "64950-0206-10",
"ProductNDC": "64950-206",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Hydrocodone Bitartrate And Homatropine Methylbromide",
"NonProprietaryName": "Hydrocodone Bitartrate And Homatropine Methylbromide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20220810",
"MarketingCategoryName": "NDA AUTHORIZED GENERIC",
"ApplicationNumber": "NDA005213",
"LabelerName": "Genus Lifesciences Inc.",
"SubstanceName": "HYDROCODONE BITARTRATE; HOMATROPINE METHYLBROMIDE",
"StrengthNumber": "5; 1.5",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Opioid Agonist [EPC], Opioid Agonists [MoA]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-05-09",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20220810",
"SamplePackage": "N",
"IndicationAndUsage": "Hydrocodone bitartrate and homatropine methylbromide is indicated for the symptomatic relief of cough in adult patients 18 years of age and older. Limitations of Use: 1 Not indicated for pediatric patients under 18 years of age [see Use in Specific Populations (8.4)]., 2 Contraindicated in pediatric patients less than 6 years of age [see Contraindications (4)]., 3 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve hydrocodone bitartrate and homatropine methylbromide for use in adult patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of cough.",
"Description": "Hydrocodone bitartrate and homatropine methylbromide tablets and oral solution contain hydrocodone, an opioid agonist; and homatropine, a muscarinic antagonist. Each tablet or spoonful (5 mL) of hydrocodone bitartrate and homatropine methylbromide contains 5 mg of hydrocodone bitartrate, USP and 1.5 mg of homatropine methylbromide, USP, for oral administration. Hydrocodone bitartrate and homatropine methylbromide tablets also contain: calcium phosphate dibasic, colloidal silicon dioxide, lactose, magnesium stearate, pregelatinized starch and stearic acid. Hydrocodone bitartrate and homatropine methylbromide oral solution also contains: anhydrous citric acid, FD&C Red 40, methylparaben, natural and artificial cherry flavor, propylparaben, purified water, sorbitol solution, sodium citrate dihydrate and sucrose. Hydrocodone Bitartrate. The chemical name for hydrocodone bitartrate is morphinan-6-one, 4,5-epoxy-3-methoxy-17-methyl-, (5α)-, [R-(R*,R*)]-2,3-dihydroxybutanedioate (1:1), hydrate (2:5). It is also known as 4,5α-Epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It occurs as a fine white crystal or crystalline powder, which is derived from the opium alkaloid, thebaine. It has a molecular weight of 494.50 and has the following chemical structure. Homatropine Methylbromide. The chemical name for homatropine methylbromide is 8-Azoniabicyclo [3.2.1]octane,3-[(hydroxyphenyl-acetyl)oxy]-8,8-dimethyl-,bromide, endo-. It occurs as a white crystal or fine white crystalline powder. It has a molecular weight of 370.29 and has the following chemical structure."
},
{
"NDCCode": "64950-216-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (64950-216-10) ",
"NDC11Code": "64950-0216-10",
"ProductNDC": "64950-216",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Isoniazid",
"NonProprietaryName": "Isoniazid",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241101",
"EndMarketingDate": "20271231",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA080936",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "ISONIAZID",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Antimycobacterial [EPC]",
"Status": "Active",
"LastUpdate": "2025-07-03",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20241101",
"EndMarketingDatePackage": "20271231",
"SamplePackage": "N",
"IndicationAndUsage": "Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.",
"Description": "Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light."
},
{
"NDCCode": "64950-218-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (64950-218-10) ",
"NDC11Code": "64950-0218-10",
"ProductNDC": "64950-218",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Flurbiprofen",
"NonProprietaryName": "Flurbiprofen",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241101",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA074431",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "FLURBIPROFEN",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]",
"Status": "Active",
"LastUpdate": "2026-02-11",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20241101",
"SamplePackage": "N",
"IndicationAndUsage": "Flurbiprofen tablets are indicated: 1 For relief of the signs and symptoms of rheumatoid arthritis., 2 For relief of the signs and symptoms of osteoarthritis.",
"Description": "Flurbiprofen Tablets, USP are a member of the phenylalkanoic acid derivative group of nonsteroidal anti-inflammatory drug. Flurbiprofen Tablets, USP are round, blue, film-coated debossed \"NH\" – \"100\" tablets for oral administration. Flurbiprofen, USP is a racemic mixture of (+)S- and (-)R- enantiomers. Flurbiprofen, USP is a white or slightly yellow crystalline powder. It is slightly soluble in water at pH 7.0 and readily soluble in most polar solvents. The chemical name is [1,1'-biphenyl]-4-acetic acid, 2-fluoro-α-methyl-, (±)-. It has the following structural formula. Each tablet, for oral administration, contains 100 mg flurbiprofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and FD&C Blue #1 aluminum lake."
},
{
"NDCCode": "64950-268-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (64950-268-10) ",
"NDC11Code": "64950-0268-10",
"ProductNDC": "64950-268",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Clemastine Fumarate",
"NonProprietaryName": "Clemastine Fumarate",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20241120",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA073283",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "CLEMASTINE FUMARATE",
"StrengthNumber": "2.68",
"StrengthUnit": "mg/1",
"Status": "Active",
"LastUpdate": "2025-02-06",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20241120",
"SamplePackage": "N",
"IndicationAndUsage": "Clemastine Fumarate Tablets USP, 2.68 mg are indicated for the relief of symptoms associated with allergic rhinitis such as sneezing, rhinorrhea, pruritus, and lacrimation. Clemastine Fumarate Tablets USP, 2.68 mg are also indicated for the relief of mild, uncomplicated allergic skin manifestations of urticaria and angioedema. It should be noted that clemastine fumarate is indicated for the dermatologic indications at the 2.68 mg dosage level only.",
"Description": "Clemastine belongs to the benzhydryl ether group of antihistaminic compounds. The chemical name is (+)-(2R)-2-[2-[[(R)-p-Chloro-α-methyl-α-phenylbenzyl]-oxy]ethyl]-1-methylpyrrolidine fumarate (1:1). Each tablet for oral administration contains 2.68 mg of clemastine fumarate, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, povidone, pregelatinized starch and stearic acid."
},
{
"NDCCode": "64950-354-10",
"PackageDescription": "1 BOTTLE, PLASTIC in 1 CARTON (64950-354-10) / 100 mL in 1 BOTTLE, PLASTIC",
"NDC11Code": "64950-0354-10",
"ProductNDC": "64950-354",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride",
"NonProprietaryName": "Oxycodone Hydrochloride",
"DosageFormName": "SOLUTION",
"RouteName": "ORAL",
"StartMarketingDate": "20130909",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200535",
"LabelerName": "Genus Lifesciences Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/5mL",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20130909",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone Hydrochloride Oral Solution is indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for use in opioid-tolerant adult patients who require higher doses of opioids for the management of pain severe enough to require an opioid analgesic and for which alternate treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy [see Warnings and Precautions (5.2)], reserve opioid analgesics, including Oxycodone Hydrochloride Oral Solution, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.",
"Description": "Oxycodone Hydrochloride Oral Solution is an agonist, available as a red solution 5 mg/5 mL (1 mg/mL) and a yellow solution 100 mg/5 mL (20 mg/mL) for oral administration. The chemical name is (5R,9R,13S,14S)-4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4∙HCl, and it has the following chemical structure. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution, 5 mg per 5 mL (l mg/mL) include: citric acid anhydrous, FD&C Red #40, natural/artificial berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbitol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) include: citric acid anhydrous, D&C Yellow #10, natural/artificial berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbitol."
},
{
"NDCCode": "64950-571-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-571-10) ",
"NDC11Code": "64950-0571-10",
"ProductNDC": "64950-571",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "15",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-572-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-572-10) ",
"NDC11Code": "64950-0572-10",
"ProductNDC": "64950-572",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "16.2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-573-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-573-10) ",
"NDC11Code": "64950-0573-10",
"ProductNDC": "64950-573",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "30",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-574-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-574-10) ",
"NDC11Code": "64950-0574-10",
"ProductNDC": "64950-574",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "32.4",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-575-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-575-10) ",
"NDC11Code": "64950-0575-10",
"ProductNDC": "64950-575",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "60",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-576-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-576-10) ",
"NDC11Code": "64950-0576-10",
"ProductNDC": "64950-576",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "64.8",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-577-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-577-10) ",
"NDC11Code": "64950-0577-10",
"ProductNDC": "64950-577",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "97.2",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-578-10",
"PackageDescription": "1000 TABLET in 1 BOTTLE (64950-578-10) ",
"NDC11Code": "64950-0578-10",
"ProductNDC": "64950-578",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Phenobarbital",
"NonProprietaryName": "Phenobarbital",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20250301",
"MarketingCategoryName": "UNAPPROVED DRUG OTHER",
"LabelerName": "Genus Lifesciences",
"SubstanceName": "PHENOBARBITAL",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"DEASchedule": "CIV",
"Status": "Active",
"LastUpdate": "2026-04-21",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20250301",
"SamplePackage": "N",
"IndicationAndUsage": "Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.",
"Description": "The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate."
},
{
"NDCCode": "64950-901-10",
"PackageDescription": "100 CAPSULE in 1 BOTTLE, PLASTIC (64950-901-10) ",
"NDC11Code": "64950-0901-10",
"ProductNDC": "64950-901",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Oxycodone Hydrochloride",
"NonProprietaryName": "Oxycodone Hydrochloride",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "20101020",
"MarketingCategoryName": "NDA",
"ApplicationNumber": "NDA200534",
"LabelerName": "Genus Lifesciences Inc.",
"SubstanceName": "OXYCODONE HYDROCHLORIDE",
"StrengthNumber": "5",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Full Opioid Agonists [MoA], Opioid Agonist [EPC]",
"DEASchedule": "CII",
"Status": "Deprecated",
"LastUpdate": "2025-11-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20101020",
"SamplePackage": "N",
"IndicationAndUsage": "Oxycodone Hydrochloride Capsules are an opioid agonist indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.",
"Description": "Oxycodone Hydrochloride Capsules are an agonist, available as a hard gelatin capsule 5 mg for oral administration. The chemical name is (5R,9R,13S,14S)-4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4HCl, and it has the following chemical structure. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Capsules, 5 mg include: colloidal silicon dioxide, FD&C Yellow #6, gelatin, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and yellow iron oxide. The imprinting on the hard gelatin capsule is black ink."
},
{
"NDCCode": "16729-217-10",
"PackageDescription": "30 TABLET, FILM COATED in 1 BOTTLE (16729-217-10) ",
"NDC11Code": "16729-0217-10",
"ProductNDC": "16729-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Sertraline Hydrochloride",
"NonProprietaryName": "Sertraline Hydrochloride",
"DosageFormName": "TABLET, FILM COATED",
"RouteName": "ORAL",
"StartMarketingDate": "20170209",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202825",
"LabelerName": "Accord Healthcare, Inc.",
"SubstanceName": "SERTRALINE HYDROCHLORIDE",
"StrengthNumber": "100",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]",
"Status": "Deprecated",
"LastUpdate": "2025-12-19",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20250101",
"SamplePackage": "N",
"IndicationAndUsage": "Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).",
"Description": "Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide."
},
{
"NDCCode": "17478-217-10",
"PackageDescription": "10 AMPULE in 1 CARTON (17478-217-10) > 10 mL in 1 AMPULE",
"NDC11Code": "17478-0217-10",
"ProductNDC": "17478-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Tranexamic Acid",
"NonProprietaryName": "Tranexamic Acid",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150309",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202373",
"LabelerName": "Akorn, Inc.",
"SubstanceName": "TRANEXAMIC ACID",
"StrengthNumber": "100",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Antifibrinolytic Agent [EPC],Decreased Fibrinolysis [PE]",
"Status": "Deprecated",
"LastUpdate": "2021-11-23",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20221231",
"StartMarketingDatePackage": "20150309",
"SamplePackage": "N"
},
{
"NDCCode": "23155-217-41",
"PackageDescription": "10 VIAL, GLASS in 1 CARTON (23155-217-41) > 4 mL in 1 VIAL, GLASS",
"NDC11Code": "23155-0217-41",
"ProductNDC": "23155-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Vancomycin Hydrochloride",
"NonProprietaryName": "Vancomycin Hydrochloride",
"DosageFormName": "INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20131115",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA202275",
"LabelerName": "Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.",
"SubstanceName": "VANCOMYCIN HYDROCHLORIDE",
"StrengthNumber": "500",
"StrengthUnit": "mg/4mL",
"Pharm_Classes": "Glycopeptide Antibacterial [EPC],Glycopeptides [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-03-20",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20201231",
"StartMarketingDatePackage": "20131115",
"SamplePackage": "N"
},
{
"NDCCode": "31722-217-33",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (31722-217-33) / 50 mL in 1 VIAL, MULTI-DOSE (31722-217-50) ",
"NDC11Code": "31722-0217-33",
"ProductNDC": "31722-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Lidocaine Hydrochloride",
"NonProprietaryName": "Lidocaine Hydrochloride",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INFILTRATION; PERINEURAL",
"StartMarketingDate": "20211108",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA214336",
"LabelerName": "Camber Pharmaceuticals, Inc.",
"SubstanceName": "LIDOCAINE HYDROCHLORIDE ANHYDROUS",
"StrengthNumber": "20",
"StrengthUnit": "mg/mL",
"Pharm_Classes": "Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]",
"Status": "Active",
"LastUpdate": "2026-04-15",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20271231",
"StartMarketingDatePackage": "20231213",
"SamplePackage": "N",
"IndicationAndUsage": "Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].",
"Description": "Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate)."
},
{
"NDCCode": "42669-217-10",
"PackageDescription": "283 g in 1 BOTTLE (42669-217-10) ",
"NDC11Code": "42669-0217-10",
"ProductNDC": "42669-217",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Heb Medicated Cornstarch Body Powder",
"NonProprietaryName": "Menthol",
"DosageFormName": "POWDER",
"RouteName": "TOPICAL",
"StartMarketingDate": "20180822",
"MarketingCategoryName": "OTC MONOGRAPH DRUG",
"ApplicationNumber": "M017",
"LabelerName": "Davion, Inc",
"SubstanceName": "MENTHOL",
"StrengthNumber": ".15",
"StrengthUnit": "g/100g",
"Status": "Active",
"LastUpdate": "2025-12-30",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20180822",
"SamplePackage": "N",
"IndicationAndUsage": "Temporary relief of pain and itch associate with: 1 Minor Cuts, 2 Sunburn, 3 Insect Bites, 4 Scrapes, 5 Minor Burns, 6 Minor Skin Irritations."
},
{
"NDCCode": "43975-217-10",
"PackageDescription": "100 TABLET in 1 BOTTLE (43975-217-10) ",
"NDC11Code": "43975-0217-10",
"ProductNDC": "43975-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Indapamide",
"NonProprietaryName": "Indapamide",
"DosageFormName": "TABLET",
"RouteName": "ORAL",
"StartMarketingDate": "20161006",
"EndMarketingDate": "20210831",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA075201",
"LabelerName": "ANI Pharmaceuticals, Inc.",
"SubstanceName": "INDAPAMIDE",
"StrengthNumber": "1.25",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Increased Diuresis [PE],Thiazide-like Diuretic [EPC]",
"Status": "Deprecated",
"LastUpdate": "2021-09-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20161006",
"EndMarketingDatePackage": "20210831",
"SamplePackage": "N"
},
{
"NDCCode": "47682-217-71",
"PackageDescription": "20 PACKET in 1 BOX (47682-217-71) / 10 mL in 1 PACKET",
"NDC11Code": "47682-0217-71",
"ProductNDC": "47682-217",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Medique Guaicon Dms",
"NonProprietaryName": "Guaifenesin, Dextromethorphan Hbr",
"DosageFormName": "SYRUP",
"RouteName": "ORAL",
"StartMarketingDate": "20110405",
"EndMarketingDate": "20230901",
"MarketingCategoryName": "OTC MONOGRAPH FINAL",
"ApplicationNumber": "part341",
"LabelerName": "UNIFIRST FIRST AID CORPORATION",
"SubstanceName": "DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN",
"StrengthNumber": "10; 100",
"StrengthUnit": "mg/5mL; mg/5mL",
"Pharm_Classes": "Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]",
"Status": "Deprecated",
"LastUpdate": "2023-09-02",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"StartMarketingDatePackage": "20110405",
"EndMarketingDatePackage": "20230901",
"SamplePackage": "N"
},
{
"NDCCode": "47993-217-10",
"PackageDescription": "500 mL in 1 BOTTLE (47993-217-10) ",
"NDC11Code": "47993-0217-10",
"ProductNDC": "47993-217",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "Hand Sanitizer",
"NonProprietaryName": "Hand Sanitizer",
"DosageFormName": "GEL",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200330",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333A",
"LabelerName": "NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "62",
"StrengthUnit": "g/112mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200330",
"SamplePackage": "N",
"IndicationAndUsage": "Uses: Reduces bacteria on the skin. Recommended for repeated use."
},
{
"NDCCode": "53217-217-10",
"PackageDescription": "10 CAPSULE in 1 BOTTLE (53217-217-10)",
"NDC11Code": "53217-0217-10",
"ProductNDC": "53217-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Amoxicillin",
"NonProprietaryName": "Amoxicillin",
"DosageFormName": "CAPSULE",
"RouteName": "ORAL",
"StartMarketingDate": "19940930",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA064076",
"LabelerName": "Aidarex Pharmaceuticals LLC",
"SubstanceName": "AMOXICILLIN",
"StrengthNumber": "500",
"StrengthUnit": "mg/1",
"Pharm_Classes": "Penicillin-class Antibacterial [EPC],Penicillins [CS]",
"Status": "Deprecated",
"LastUpdate": "2020-01-01",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20191231",
"IndicationAndUsage": "Amoxicillin is a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 – 1.5) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5) .",
"Description": "Formulations of amoxicillin contain amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum."
},
{
"NDCCode": "54575-217-10",
"PackageDescription": "10 mL in 1 VIAL, MULTI-DOSE (54575-217-10)",
"NDC11Code": "54575-0217-10",
"ProductNDC": "54575-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Rhizopus Nigricans",
"NonProprietaryName": "Rhizopus Stolonifer",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "PERCUTANEOUS; SUBCUTANEOUS",
"StartMarketingDate": "19671207",
"MarketingCategoryName": "BLA",
"ApplicationNumber": "BLA101376",
"LabelerName": "Allergy Laboratories, Inc.",
"SubstanceName": "RHIZOPUS STOLONIFER",
"StrengthNumber": "1",
"StrengthUnit": "g/20mL",
"Pharm_Classes": "Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231",
"IndicationAndUsage": "Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.",
"Description": "Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens."
},
{
"NDCCode": "55150-217-10",
"PackageDescription": "10 VIAL, MULTI-DOSE in 1 CARTON (55150-217-10) > 10 mL in 1 VIAL, MULTI-DOSE",
"NDC11Code": "55150-0217-10",
"ProductNDC": "55150-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Atracurium Besylate",
"NonProprietaryName": "Atracurium Besylate",
"DosageFormName": "INJECTION, SOLUTION",
"RouteName": "INTRAVENOUS",
"StartMarketingDate": "20150408",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA206011",
"LabelerName": "AuroMedics Pharma LLC",
"SubstanceName": "ATRACURIUM BESYLATE",
"StrengthNumber": "100",
"StrengthUnit": "mg/10mL",
"Pharm_Classes": "Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]",
"Status": "Active",
"LastUpdate": "2022-02-16",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20261231",
"StartMarketingDatePackage": "20150408",
"SamplePackage": "N",
"IndicationAndUsage": "Atracurium Besylate Injection, USP is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.",
"Description": "Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1.Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple-dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated."
},
{
"NDCCode": "55648-217-04",
"PackageDescription": "10 BLISTER PACK in 1 CARTON (55648-217-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK",
"NDC11Code": "55648-0217-04",
"ProductNDC": "55648-217",
"ProductTypeName": "HUMAN PRESCRIPTION DRUG",
"ProprietaryName": "Diclofenac Sodium And Misoprostol",
"NonProprietaryName": "Diclofenac Sodium And Misoprostol",
"DosageFormName": "TABLET, DELAYED RELEASE",
"RouteName": "ORAL",
"StartMarketingDate": "20120815",
"MarketingCategoryName": "ANDA",
"ApplicationNumber": "ANDA201948",
"LabelerName": "Wockhardt Limited",
"SubstanceName": "DICLOFENAC SODIUM; MISOPROSTOL",
"StrengthNumber": "75; .2",
"StrengthUnit": "mg/1; mg/1",
"Pharm_Classes": "Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]",
"Status": "Deprecated",
"LastUpdate": "2019-09-21",
"ProductNdcExcludeFlag": "E",
"ListingRecordCertifiedThrough": "20181231"
},
{
"NDCCode": "56136-217-01",
"PackageDescription": "10 mL in 1 BOTTLE, SPRAY (56136-217-01) ",
"NDC11Code": "56136-0217-01",
"ProductNDC": "56136-217",
"ProductTypeName": "HUMAN OTC DRUG",
"ProprietaryName": "On The Go Hand Sanitizer White Jasmine",
"ProprietaryNameSuffix": "With Vitamin E",
"NonProprietaryName": "Alcohol",
"DosageFormName": "SPRAY",
"RouteName": "TOPICAL",
"StartMarketingDate": "20200925",
"MarketingCategoryName": "OTC MONOGRAPH NOT FINAL",
"ApplicationNumber": "part333E",
"LabelerName": "Ganzhou Olivee Cosmetic Co., Ltd.",
"SubstanceName": "ALCOHOL",
"StrengthNumber": "70",
"StrengthUnit": "mL/100mL",
"Status": "Deprecated",
"LastUpdate": "2025-01-01",
"PackageNdcExcludeFlag": "N",
"ProductNdcExcludeFlag": "N",
"ListingRecordCertifiedThrough": "20241231",
"StartMarketingDatePackage": "20200925",
"SamplePackage": "N",
"IndicationAndUsage": "Antiseptic Cleanser, Help decrease bacteria on skin."
}
]
}
<?xml version="1.0" encoding="utf-8"?>
<NDCList>
<NDC>
<NDCCode>64950-217-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64950-217-10) </PackageDescription>
<NDC11Code>64950-0217-10</NDC11Code>
<ProductNDC>64950-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<EndMarketingDate>20280228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080937</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<EndMarketingDatePackage>20280228</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.</IndicationAndUsage>
<Description>Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>64950-217-03</NDCCode>
<PackageDescription>30 TABLET in 1 BOTTLE (64950-217-03) </PackageDescription>
<NDC11Code>64950-0217-03</NDC11Code>
<ProductNDC>64950-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<EndMarketingDate>20280228</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080937</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>300</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<EndMarketingDatePackage>20271231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.</IndicationAndUsage>
<Description>Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>64950-205-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (64950-205-10) </PackageDescription>
<NDC11Code>64950-0205-10</NDC11Code>
<ProductNDC>64950-205</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hycodan</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Homatropine Methylbromide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20211101</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA005213</ApplicationNumber>
<LabelerName>Genus Lifesciences Inc.</LabelerName>
<SubstanceName>HOMATROPINE METHYLBROMIDE; HYDROCODONE BITARTRATE</SubstanceName>
<StrengthNumber>1.5; 5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2026-04-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20211101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>HYCODAN is indicated for the symptomatic relief of cough in adult patients 18 years of age and older.</IndicationAndUsage>
<Description>HYCODAN tablets and oral solution contain hydrocodone, an opioid agonist; and homatropine, a muscarinic antagonist. Each tablet or spoonful (5 mL) of HYCODAN contains 5 mg of hydrocodone bitartrate, USP and 1.5 mg of homatropine methylbromide, USP, for oral administration. HYCODAN tablets also contain: calcium phosphate dibasic, colloidal silicon dioxide, lactose, magnesium stearate, pregelatinized starch and stearic acid. HYCODAN oral solution also contains: anhydrous citric acid, FD&C Red 40, methylparaben, natural and artificial cherry flavor, propylparaben, purified water, sorbitol solution, sodium citrate dihydrate and sucrose.</Description>
</NDC>
<NDC>
<NDCCode>64950-206-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE, PLASTIC (64950-206-10) </PackageDescription>
<NDC11Code>64950-0206-10</NDC11Code>
<ProductNDC>64950-206</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Hydrocodone Bitartrate And Homatropine Methylbromide</ProprietaryName>
<NonProprietaryName>Hydrocodone Bitartrate And Homatropine Methylbromide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20220810</StartMarketingDate>
<MarketingCategoryName>NDA AUTHORIZED GENERIC</MarketingCategoryName>
<ApplicationNumber>NDA005213</ApplicationNumber>
<LabelerName>Genus Lifesciences Inc.</LabelerName>
<SubstanceName>HYDROCODONE BITARTRATE; HOMATROPINE METHYLBROMIDE</SubstanceName>
<StrengthNumber>5; 1.5</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Opioid Agonist [EPC], Opioid Agonists [MoA]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-05-09</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20220810</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Hydrocodone bitartrate and homatropine methylbromide is indicated for the symptomatic relief of cough in adult patients 18 years of age and older. Limitations of Use: 1 Not indicated for pediatric patients under 18 years of age [see Use in Specific Populations (8.4)]., 2 Contraindicated in pediatric patients less than 6 years of age [see Contraindications (4)]., 3 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy [see Warnings and Precautions (5.1)], reserve hydrocodone bitartrate and homatropine methylbromide for use in adult patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of cough.</IndicationAndUsage>
<Description>Hydrocodone bitartrate and homatropine methylbromide tablets and oral solution contain hydrocodone, an opioid agonist; and homatropine, a muscarinic antagonist. Each tablet or spoonful (5 mL) of hydrocodone bitartrate and homatropine methylbromide contains 5 mg of hydrocodone bitartrate, USP and 1.5 mg of homatropine methylbromide, USP, for oral administration. Hydrocodone bitartrate and homatropine methylbromide tablets also contain: calcium phosphate dibasic, colloidal silicon dioxide, lactose, magnesium stearate, pregelatinized starch and stearic acid. Hydrocodone bitartrate and homatropine methylbromide oral solution also contains: anhydrous citric acid, FD&C Red 40, methylparaben, natural and artificial cherry flavor, propylparaben, purified water, sorbitol solution, sodium citrate dihydrate and sucrose. Hydrocodone Bitartrate. The chemical name for hydrocodone bitartrate is morphinan-6-one, 4,5-epoxy-3-methoxy-17-methyl-, (5α)-, [R-(R*,R*)]-2,3-dihydroxybutanedioate (1:1), hydrate (2:5). It is also known as 4,5α-Epoxy-3-methoxy-17-methylmorphinan-6-one tartrate (1:1) hydrate (2:5). It occurs as a fine white crystal or crystalline powder, which is derived from the opium alkaloid, thebaine. It has a molecular weight of 494.50 and has the following chemical structure. Homatropine Methylbromide. The chemical name for homatropine methylbromide is 8-Azoniabicyclo [3.2.1]octane,3-[(hydroxyphenyl-acetyl)oxy]-8,8-dimethyl-,bromide, endo-. It occurs as a white crystal or fine white crystalline powder. It has a molecular weight of 370.29 and has the following chemical structure.</Description>
</NDC>
<NDC>
<NDCCode>64950-216-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64950-216-10) </PackageDescription>
<NDC11Code>64950-0216-10</NDC11Code>
<ProductNDC>64950-216</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Isoniazid</ProprietaryName>
<NonProprietaryName>Isoniazid</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<EndMarketingDate>20271231</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA080936</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>ISONIAZID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Antimycobacterial [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2025-07-03</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<EndMarketingDatePackage>20271231</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Isoniazid tablets, USP are recommended for all forms of tuberculosis in which organisms are susceptible. However, active tuberculosis must be treated with multiple concomitant anti-tuberculosis medications to prevent the emergence of drug resistance. Single-drug treatment of active tuberculosis with isoniazid or any other medication, is inadequate therapy. Isoniazid tablets, USP are recommended as preventive therapy for the following groups, regardless of age. (Note: the criterion for a positive reaction to a skin test (in millimeters of induration) for each group is given in parenthesis): 1 Persons with human immunodeficiency virus (HIV) infection (greater than or equal to 5 mm) and persons with risk factors for HIV infection whose HIV infection status is unknown but who are suspected of having HIV infection. Preventive therapy may be considered for HIV infected persons who are tuberculin-negative but belong to groups in which the prevalence of tuberculosis infection is high. Candidates for preventive therapy who have HIV infection should have a minimum of 12 months of therapy., 2 Close contacts of persons with newly diagnosed infectious tuberculosis (greater than or equal to 5 mm). In addition, tuberculin-negative (less than 5 mm) children and adolescents who have been close contacts of infectious persons within the past 3 months are candidates for preventive therapy until a repeat tuberculin skin test is done 12 weeks after contact with the infectious source. If the repeat skin test is positive (greater than 5mm), therapy should be continued., 3 Recent converters, as indicated by a tuberculin skin test (greater than or equal to 10 mm increase within a 2-year period for those less than 35 years old; greater than or equal to 15 mm increase for those greater than or equal to 35 years of age). All infants and children younger than 4 years of age with a greater than 10 mm skin test are included in this category., 4 Persons with abnormal chest radiographs that show fibrotic lesions likely to represent old healed tuberculosis (greater than or equal to 5 mm). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly., 5 Intravenous drug users known to be HIV-seronegative (greater than 10 mm)., 6 Persons with the following medical conditions that have been reported to increase the risk of tuberculosis (greater than or equal to 10 mm): silicosis; diabetes mellitus; prolonged therapy with adrenocorticosteroids; immunosuppressive therapy; some hematologic and reticuloendothelial diseases, such as leukemia or Hodgkin's disease; end-stage renal disease; clinical situations associated with substantial rapid weight loss or chronic undernutrition (including: intestinal bypass surgery for obesity, the postgastrectomy state [with or without weight loss], chronic peptic ulcer disease, chronic malabsorption syndromes and carcinomas of the oropharynx and upper gastrointestinal tract that prevent adequate nutritional intake). Candidates for preventive therapy who have fibrotic pulmonary lesions consistent with healed tuberculosis or who have pulmonary silicosis should have 12 months of isoniazid or 4 months of isoniazid and rifampin, concomitantly.</IndicationAndUsage>
<Description>Isoniazid, USP is an antibacterial available as 100 mg and 300 mg tablets for oral administration. Each tablet also contains as inactive ingredients: colloidal silicon dioxide, crospovidone, hydrogenated vegetable oil, microcrystalline cellulose, pregelatinized corn starch and talc. Isoniazid, USP is chemically known as isonicotinyl hydrazine or isonicotinic acid hydrazide. It has the following structural formula. Isoniazid, USP is odorless, and occurs as a colorless or white crystalline powder or as white crystals. It is freely soluble in water, sparingly soluble in alcohol and slightly soluble in chloroform and in ether. Isoniazid, USP is slowly affected by exposure to air and light.</Description>
</NDC>
<NDC>
<NDCCode>64950-218-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64950-218-10) </PackageDescription>
<NDC11Code>64950-0218-10</NDC11Code>
<ProductNDC>64950-218</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Flurbiprofen</ProprietaryName>
<NonProprietaryName>Flurbiprofen</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241101</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA074431</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>FLURBIPROFEN</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Anti-Inflammatory Agents, Non-Steroidal [CS], Cyclooxygenase Inhibitors [MoA], Nonsteroidal Anti-inflammatory Drug [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-02-11</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Flurbiprofen tablets are indicated: 1 For relief of the signs and symptoms of rheumatoid arthritis., 2 For relief of the signs and symptoms of osteoarthritis.</IndicationAndUsage>
<Description>Flurbiprofen Tablets, USP are a member of the phenylalkanoic acid derivative group of nonsteroidal anti-inflammatory drug. Flurbiprofen Tablets, USP are round, blue, film-coated debossed "NH" – "100" tablets for oral administration. Flurbiprofen, USP is a racemic mixture of (+)S- and (-)R- enantiomers. Flurbiprofen, USP is a white or slightly yellow crystalline powder. It is slightly soluble in water at pH 7.0 and readily soluble in most polar solvents. The chemical name is [1,1'-biphenyl]-4-acetic acid, 2-fluoro-α-methyl-, (±)-. It has the following structural formula. Each tablet, for oral administration, contains 100 mg flurbiprofen, USP. In addition, each tablet contains the following inactive ingredients: colloidal silicon dioxide, croscarmellose sodium, hypromellose, lactose monohydrate, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, titanium dioxide, and FD&C Blue #1 aluminum lake.</Description>
</NDC>
<NDC>
<NDCCode>64950-268-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (64950-268-10) </PackageDescription>
<NDC11Code>64950-0268-10</NDC11Code>
<ProductNDC>64950-268</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Clemastine Fumarate</ProprietaryName>
<NonProprietaryName>Clemastine Fumarate</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20241120</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA073283</ApplicationNumber>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>CLEMASTINE FUMARATE</SubstanceName>
<StrengthNumber>2.68</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-02-06</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20241120</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Clemastine Fumarate Tablets USP, 2.68 mg are indicated for the relief of symptoms associated with allergic rhinitis such as sneezing, rhinorrhea, pruritus, and lacrimation. Clemastine Fumarate Tablets USP, 2.68 mg are also indicated for the relief of mild, uncomplicated allergic skin manifestations of urticaria and angioedema. It should be noted that clemastine fumarate is indicated for the dermatologic indications at the 2.68 mg dosage level only.</IndicationAndUsage>
<Description>Clemastine belongs to the benzhydryl ether group of antihistaminic compounds. The chemical name is (+)-(2R)-2-[2-[[(R)-p-Chloro-α-methyl-α-phenylbenzyl]-oxy]ethyl]-1-methylpyrrolidine fumarate (1:1). Each tablet for oral administration contains 2.68 mg of clemastine fumarate, USP. Inactive ingredients: colloidal silicon dioxide, corn starch, lactose monohydrate, povidone, pregelatinized starch and stearic acid.</Description>
</NDC>
<NDC>
<NDCCode>64950-354-10</NDCCode>
<PackageDescription>1 BOTTLE, PLASTIC in 1 CARTON (64950-354-10) / 100 mL in 1 BOTTLE, PLASTIC</PackageDescription>
<NDC11Code>64950-0354-10</NDC11Code>
<ProductNDC>64950-354</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
<DosageFormName>SOLUTION</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20130909</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200535</ApplicationNumber>
<LabelerName>Genus Lifesciences Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/5mL</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20130909</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone Hydrochloride Oral Solution is indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate. Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) is indicated for use in opioid-tolerant adult patients who require higher doses of opioids for the management of pain severe enough to require an opioid analgesic and for which alternate treatments are inadequate. Limitations of Use: 1 Because of the risks of addiction, abuse, misuse, overdose, and death, which can occur at any dosage or duration, and persist over the course of therapy [see Warnings and Precautions (5.2)], reserve opioid analgesics, including Oxycodone Hydrochloride Oral Solution, for use in patients for whom alternative treatment options are ineffective, not tolerated, or would be otherwise inadequate to provide sufficient management of pain.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride Oral Solution is an agonist, available as a red solution 5 mg/5 mL (1 mg/mL) and a yellow solution 100 mg/5 mL (20 mg/mL) for oral administration. The chemical name is (5R,9R,13S,14S)-4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4∙HCl, and it has the following chemical structure. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution, 5 mg per 5 mL (l mg/mL) include: citric acid anhydrous, FD&C Red #40, natural/artificial berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbitol. The inactive ingredients in Oxycodone Hydrochloride Oral Solution 100 mg per 5 mL (20 mg/mL) include: citric acid anhydrous, D&C Yellow #10, natural/artificial berry flavor, purified water, sodium citrate dihydrate, sodium benzoate, saccharin sodium, sorbitol.</Description>
</NDC>
<NDC>
<NDCCode>64950-571-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-571-10) </PackageDescription>
<NDC11Code>64950-0571-10</NDC11Code>
<ProductNDC>64950-571</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>15</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-572-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-572-10) </PackageDescription>
<NDC11Code>64950-0572-10</NDC11Code>
<ProductNDC>64950-572</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>16.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-573-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-573-10) </PackageDescription>
<NDC11Code>64950-0573-10</NDC11Code>
<ProductNDC>64950-573</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>30</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-574-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-574-10) </PackageDescription>
<NDC11Code>64950-0574-10</NDC11Code>
<ProductNDC>64950-574</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>32.4</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-575-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-575-10) </PackageDescription>
<NDC11Code>64950-0575-10</NDC11Code>
<ProductNDC>64950-575</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>60</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-576-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-576-10) </PackageDescription>
<NDC11Code>64950-0576-10</NDC11Code>
<ProductNDC>64950-576</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>64.8</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-577-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-577-10) </PackageDescription>
<NDC11Code>64950-0577-10</NDC11Code>
<ProductNDC>64950-577</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>97.2</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-578-10</NDCCode>
<PackageDescription>1000 TABLET in 1 BOTTLE (64950-578-10) </PackageDescription>
<NDC11Code>64950-0578-10</NDC11Code>
<ProductNDC>64950-578</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Phenobarbital</ProprietaryName>
<NonProprietaryName>Phenobarbital</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20250301</StartMarketingDate>
<MarketingCategoryName>UNAPPROVED DRUG OTHER</MarketingCategoryName>
<LabelerName>Genus Lifesciences</LabelerName>
<SubstanceName>PHENOBARBITAL</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<DEASchedule>CIV</DEASchedule>
<Status>Active</Status>
<LastUpdate>2026-04-21</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250301</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sedative. Anticonvulsant – For the treatment of generalized and partial seizures.</IndicationAndUsage>
<Description>The barbiturates are nonselective central nervous system (CNS) depressants that are primarily used as sedative-hypnotics. In subhypnotic doses, they are also used as anticonvulsants. The barbiturates and their sodium salts are subject to control under the Federal Controlled Substances Act. Phenobarbital is a barbituric acid derivative and occurs as white, odorless, small crystals or crystalline hydroxides and carbonates; sparingly soluble in chloroform. Phenobarbital is 5-ethyl-5-phenylbarbituric acid. Phenobarbital is a substituted pyrimidine derivative in which the basic structure is barbituric acid, a substance that has no CNS activity. CNS activity is obtained by substituting alkyl, alkenyl, or aryl groups on the pyrimidine ring. It has the following structural formula. Each phenobarbital tablet contains 15 mg, 16.2 mg, 30 mg, 32.4 mg, 60 mg, 64.8 mg, 97.2 mg or 100 mg of phenobarbital. In addition each tablet contains: colloidal silicon dioxide, lactose monohydrate, magnesium stearate, microcrystalline cellulose and sodium starch glycolate.</Description>
</NDC>
<NDC>
<NDCCode>64950-901-10</NDCCode>
<PackageDescription>100 CAPSULE in 1 BOTTLE, PLASTIC (64950-901-10) </PackageDescription>
<NDC11Code>64950-0901-10</NDC11Code>
<ProductNDC>64950-901</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Oxycodone Hydrochloride</ProprietaryName>
<NonProprietaryName>Oxycodone Hydrochloride</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20101020</StartMarketingDate>
<MarketingCategoryName>NDA</MarketingCategoryName>
<ApplicationNumber>NDA200534</ApplicationNumber>
<LabelerName>Genus Lifesciences Inc.</LabelerName>
<SubstanceName>OXYCODONE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>5</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Full Opioid Agonists [MoA], Opioid Agonist [EPC]</Pharm_Classes>
<DEASchedule>CII</DEASchedule>
<Status>Deprecated</Status>
<LastUpdate>2025-11-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20101020</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Oxycodone Hydrochloride Capsules are an opioid agonist indicated in adults for the management of pain severe enough to require an opioid analgesic and for which alternative treatments are inadequate.</IndicationAndUsage>
<Description>Oxycodone Hydrochloride Capsules are an agonist, available as a hard gelatin capsule 5 mg for oral administration. The chemical name is (5R,9R,13S,14S)-4,5α-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one hydrochloride. The molecular weight is 351.82. Its molecular formula is C18H21NO4HCl, and it has the following chemical structure. Oxycodone hydrochloride is a white, odorless crystalline powder derived from the opium alkaloid, thebaine. It is soluble in water and slightly soluble in alcohol. The inactive ingredients in Oxycodone Hydrochloride Capsules, 5 mg include: colloidal silicon dioxide, FD&C Yellow #6, gelatin, lactose anhydrous, magnesium stearate, microcrystalline cellulose, pregelatinized starch, sodium lauryl sulfate, sodium starch glycolate, titanium dioxide and yellow iron oxide. The imprinting on the hard gelatin capsule is black ink.</Description>
</NDC>
<NDC>
<NDCCode>16729-217-10</NDCCode>
<PackageDescription>30 TABLET, FILM COATED in 1 BOTTLE (16729-217-10) </PackageDescription>
<NDC11Code>16729-0217-10</NDC11Code>
<ProductNDC>16729-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Sertraline Hydrochloride</ProprietaryName>
<NonProprietaryName>Sertraline Hydrochloride</NonProprietaryName>
<DosageFormName>TABLET, FILM COATED</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20170209</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202825</ApplicationNumber>
<LabelerName>Accord Healthcare, Inc.</LabelerName>
<SubstanceName>SERTRALINE HYDROCHLORIDE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Cytochrome P450 2D6 Inhibitors [MoA], Serotonin Reuptake Inhibitor [EPC], Serotonin Uptake Inhibitors [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2025-12-19</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20250101</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Sertraline hydrochloride tablets are indicated for the treatment of the following [See Clinical Studies (14)] : : 1 Major depressive disorder (MDD), 2 Obsessive-compulsive disorder (OCD), 3 Panic disorder (PD), 4 Posttraumatic stress disorder (PTSD), 5 Social anxiety disorder (SAD), 6 Premenstrual dysphoric disorder (PMDD).</IndicationAndUsage>
<Description>Sertraline hydrochloride tablets, USP contain sertraline hydrochloride, an SSRI. Sertraline hydrochloride has a molecular weight of 342.7 and has the following chemical name: (1S-cis)-4-(3,4-dichlorophenyl)-1,2,3,4-tetrahydro-N-methyl-1-naphthalenamine hydrochloride. The empirical formula C 17H 17NCl 2HCl is represented by the following structural formula:. Sertraline hydrochloride is a white crystalline powder that is slightly soluble in water and isopropyl alcohol, and sparingly soluble in ethanol. Sertraline hydrochloride tablets, USP are supplied for oral administration as scored tablets containing sertraline hydrochloride equivalent to 25, 50 and 100 mg of sertraline and the following inactive ingredients: dibasic calcium phosphate anhydrous, D & C Yellow #10 aluminum lake (in 25 mg tablet), FD & C Blue #1 aluminum lake (in 25 mg tablet), FD & C Blue # 2 aluminum lake (in 50 mg tablet), hydroxypropyl cellulose, hypromellose, magnesium stearate, microcrystalline cellulose, polyethylene glycol, polysorbate 80, sodium starch glycolate, iron oxide yellow (in 100 mg tablet), and titanium dioxide.</Description>
</NDC>
<NDC>
<NDCCode>17478-217-10</NDCCode>
<PackageDescription>10 AMPULE in 1 CARTON (17478-217-10) > 10 mL in 1 AMPULE</PackageDescription>
<NDC11Code>17478-0217-10</NDC11Code>
<ProductNDC>17478-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Tranexamic Acid</ProprietaryName>
<NonProprietaryName>Tranexamic Acid</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150309</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202373</ApplicationNumber>
<LabelerName>Akorn, Inc.</LabelerName>
<SubstanceName>TRANEXAMIC ACID</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Antifibrinolytic Agent [EPC],Decreased Fibrinolysis [PE]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-11-23</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20221231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150309</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>23155-217-41</NDCCode>
<PackageDescription>10 VIAL, GLASS in 1 CARTON (23155-217-41) > 4 mL in 1 VIAL, GLASS</PackageDescription>
<NDC11Code>23155-0217-41</NDC11Code>
<ProductNDC>23155-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Vancomycin Hydrochloride</ProprietaryName>
<NonProprietaryName>Vancomycin Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, POWDER, LYOPHILIZED, FOR SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20131115</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA202275</ApplicationNumber>
<LabelerName>Heritage Pharmaceuticals Inc. d/b/a Avet Pharmaceuticals Inc.</LabelerName>
<SubstanceName>VANCOMYCIN HYDROCHLORIDE</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/4mL</StrengthUnit>
<Pharm_Classes>Glycopeptide Antibacterial [EPC],Glycopeptides [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-03-20</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20201231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20131115</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>31722-217-33</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (31722-217-33) / 50 mL in 1 VIAL, MULTI-DOSE (31722-217-50) </PackageDescription>
<NDC11Code>31722-0217-33</NDC11Code>
<ProductNDC>31722-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Lidocaine Hydrochloride</ProprietaryName>
<NonProprietaryName>Lidocaine Hydrochloride</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INFILTRATION; PERINEURAL</RouteName>
<StartMarketingDate>20211108</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA214336</ApplicationNumber>
<LabelerName>Camber Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>LIDOCAINE HYDROCHLORIDE ANHYDROUS</SubstanceName>
<StrengthNumber>20</StrengthNumber>
<StrengthUnit>mg/mL</StrengthUnit>
<Pharm_Classes>Amide Local Anesthetic [EPC], Amides [CS], Antiarrhythmic [EPC], Local Anesthesia [PE]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2026-04-15</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20271231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20231213</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Lidocaine hydrochloride injection is indicated in adult and pediatric patients for the production of local or regional anesthesia or analgesia for surgery, dental, and oral surgery procedures, diagnostic and therapeutic procedures, and for obstetrical procedures. Specific concentrations and presentations of lidocaine hydrochloride injection are recommended for each type of block indicated to produce local or regional anesthesia or analgesia [see Dosage and Administration (2.2)].</IndicationAndUsage>
<Description>Lidocaine hydrochloride injection contains lidocaine hydrochloride, an amide local anesthetic, as the active pharmaceutical ingredient. The route of administration for lidocaine hydrochloride is by injection, for infiltration, nerve block, use. Multiple dose vials contain methylparaben and they should not be used for caudal and lumbar epidural blocks. Lidocaine hydrochloride, is chemically designated as acetamide, 2-(diethylamino)-N-(2,6-dimethylphenyl)-, monohydrochloride and has the molecular weight of 270.8 g/mol. Lidocaine hydrochloride molecular formula is C 14H 22N 2O HCl, and has the following structural formula:. Lidocaine hydrochloride injection in multiple dose vials is a sterile, nonpyrogenic, isotonic, clear, colorless solution containing lidocaine hydrochloride and sodium chloride. Each mL contains 1 mg methylparaben as an antiseptic preservative. The pH of these solutions is adjusted to approximately 6.5 (5.0 to 7.0) with sodium hydroxide and hydrochloric acid. £ Quantity is equivalent to 10.66 mg/mL Lidocaine Hydrochloride, USP (Monohydrate). μ Quantity is equivalent to 21.33 mg/mL Lidocaine Hydrochloride, USP (Monohydrate).</Description>
</NDC>
<NDC>
<NDCCode>42669-217-10</NDCCode>
<PackageDescription>283 g in 1 BOTTLE (42669-217-10) </PackageDescription>
<NDC11Code>42669-0217-10</NDC11Code>
<ProductNDC>42669-217</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Heb Medicated Cornstarch Body Powder</ProprietaryName>
<NonProprietaryName>Menthol</NonProprietaryName>
<DosageFormName>POWDER</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20180822</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH DRUG</MarketingCategoryName>
<ApplicationNumber>M017</ApplicationNumber>
<LabelerName>Davion, Inc</LabelerName>
<SubstanceName>MENTHOL</SubstanceName>
<StrengthNumber>.15</StrengthNumber>
<StrengthUnit>g/100g</StrengthUnit>
<Status>Active</Status>
<LastUpdate>2025-12-30</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20180822</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Temporary relief of pain and itch associate with: 1 Minor Cuts, 2 Sunburn, 3 Insect Bites, 4 Scrapes, 5 Minor Burns, 6 Minor Skin Irritations.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>43975-217-10</NDCCode>
<PackageDescription>100 TABLET in 1 BOTTLE (43975-217-10) </PackageDescription>
<NDC11Code>43975-0217-10</NDC11Code>
<ProductNDC>43975-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Indapamide</ProprietaryName>
<NonProprietaryName>Indapamide</NonProprietaryName>
<DosageFormName>TABLET</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20161006</StartMarketingDate>
<EndMarketingDate>20210831</EndMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA075201</ApplicationNumber>
<LabelerName>ANI Pharmaceuticals, Inc.</LabelerName>
<SubstanceName>INDAPAMIDE</SubstanceName>
<StrengthNumber>1.25</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Increased Diuresis [PE],Thiazide-like Diuretic [EPC]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2021-09-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20161006</StartMarketingDatePackage>
<EndMarketingDatePackage>20210831</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>47682-217-71</NDCCode>
<PackageDescription>20 PACKET in 1 BOX (47682-217-71) / 10 mL in 1 PACKET</PackageDescription>
<NDC11Code>47682-0217-71</NDC11Code>
<ProductNDC>47682-217</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Medique Guaicon Dms</ProprietaryName>
<NonProprietaryName>Guaifenesin, Dextromethorphan Hbr</NonProprietaryName>
<DosageFormName>SYRUP</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20110405</StartMarketingDate>
<EndMarketingDate>20230901</EndMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH FINAL</MarketingCategoryName>
<ApplicationNumber>part341</ApplicationNumber>
<LabelerName>UNIFIRST FIRST AID CORPORATION</LabelerName>
<SubstanceName>DEXTROMETHORPHAN HYDROBROMIDE; GUAIFENESIN</SubstanceName>
<StrengthNumber>10; 100</StrengthNumber>
<StrengthUnit>mg/5mL; mg/5mL</StrengthUnit>
<Pharm_Classes>Decreased Respiratory Secretion Viscosity [PE], Expectorant [EPC], Increased Respiratory Secretions [PE], Sigma-1 Agonist [EPC], Sigma-1 Receptor Agonists [MoA], Uncompetitive N-methyl-D-aspartate Receptor Antagonist [EPC], Uncompetitive NMDA Receptor Antagonists [MoA]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2023-09-02</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<StartMarketingDatePackage>20110405</StartMarketingDatePackage>
<EndMarketingDatePackage>20230901</EndMarketingDatePackage>
<SamplePackage>N</SamplePackage>
</NDC>
<NDC>
<NDCCode>47993-217-10</NDCCode>
<PackageDescription>500 mL in 1 BOTTLE (47993-217-10) </PackageDescription>
<NDC11Code>47993-0217-10</NDC11Code>
<ProductNDC>47993-217</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>Hand Sanitizer</ProprietaryName>
<NonProprietaryName>Hand Sanitizer</NonProprietaryName>
<DosageFormName>GEL</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200330</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333A</ApplicationNumber>
<LabelerName>NINGBO JIANGBEI OCEAN STAR TRADING CO.,LTD</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>62</StrengthNumber>
<StrengthUnit>g/112mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200330</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Uses: Reduces bacteria on the skin. Recommended for repeated use.</IndicationAndUsage>
</NDC>
<NDC>
<NDCCode>53217-217-10</NDCCode>
<PackageDescription>10 CAPSULE in 1 BOTTLE (53217-217-10)</PackageDescription>
<NDC11Code>53217-0217-10</NDC11Code>
<ProductNDC>53217-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Amoxicillin</ProprietaryName>
<NonProprietaryName>Amoxicillin</NonProprietaryName>
<DosageFormName>CAPSULE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>19940930</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA064076</ApplicationNumber>
<LabelerName>Aidarex Pharmaceuticals LLC</LabelerName>
<SubstanceName>AMOXICILLIN</SubstanceName>
<StrengthNumber>500</StrengthNumber>
<StrengthUnit>mg/1</StrengthUnit>
<Pharm_Classes>Penicillin-class Antibacterial [EPC],Penicillins [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2020-01-01</LastUpdate>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20191231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Amoxicillin is a penicillin-class antibacterial indicated for treatment of infections due to susceptible strains of designated microorganisms. : 1 Infections of the ear, nose, throat, genitourinary tract, skin and skin structure, and lower respiratory tract. ( 1.1 – 1.5) , 2 In combination for treatment of H. pylori infection and duodenal ulcer disease. (1.5) .</IndicationAndUsage>
<Description>Formulations of amoxicillin contain amoxicillin, a semisynthetic antibiotic, an analog of ampicillin, with a broad spectrum of bactericidal activity against many Gram-positive and Gram-negative microorganisms. Chemically, it is (2 S,5 R,6 R)-6-[(R)-(-)-2-amino-2-( p-hydroxyphenyl)acetamido]-3,3-dimethyl-7-oxo-4- thia-1-azabicyclo[3.2.0]heptane-2-carboxylic acid trihydrate. It may be represented structurally as:. The amoxicillin molecular formula is C 16H 19N 3O 5S 3H 2O, and the molecular weight is 419.45. Amoxicillin Capsules, USP. Each amoxicillin capsule, with yellow opaque cap and body, contains 250 mg or 500 mg amoxicillin as the trihydrate. The 250 mg capsule is imprinted AMOX 250 on one side and GG 848 on the other side; the 500 mg capsule is imprinted AMOX 500 on one side and GG 849 on the other side. Inactive ingredients: Capsule shells - yellow ferric oxide, titanium dioxide, gelatin, black ferric oxide, shellac, propylene glycol, potassium hydroxide and ammonium hydroxide; Capsule contents - cellulose microcrystalline and magnesium stearate. Meets USP Dissolution Test 2. Amoxicillin Tablets, USP. Each film coated tablet contains 500 mg or 875 mg amoxicillin as the trihydrate. The tablets are oval-shaped and white to yellowish. The 500 mg tablet is unscored, embossed GG-961 on one side and 500 on the other side. The 875 mg tablet is scored and embossed GG-962 on one side and 875 on the other side. In addition each amoxicillin tablet contains these inactive ingredients: colloidal silicon dioxide, crospovidone, ethylcellulose aqueous dispersion, hypromellose, magnesium stearate, microcrystalline cellulose, sodium starch glycolate, talc, triethyl citrate, and titanium dioxide. Amoxicillin for Oral Suspension, USP. Each 5 mL of reconstituted suspension contains 125 mg, 200 mg, 250 mg or 400 mg amoxicillin as the trihydrate. Each 5 mL of the 125 mg, 200 mg, 250 mg, and 400 mg reconstituted suspension contains 0.30 mEq (6.95 mg) of sodium. Amoxicillin trihydrate for oral suspension 125 mg/5 mL, 200 mg/5 mL, 250 mg/5 mL and 400 mg/5 mL are fruity flavored pink suspensions. Inactive ingredients: anhydrous citric acid, colloidal silicon dioxide, flavorings: raspberry, strawberry, refrachessement, FD&C Red 40, sodium benzoate, sodium citrate, sucrose, and xantham gum.</Description>
</NDC>
<NDC>
<NDCCode>54575-217-10</NDCCode>
<PackageDescription>10 mL in 1 VIAL, MULTI-DOSE (54575-217-10)</PackageDescription>
<NDC11Code>54575-0217-10</NDC11Code>
<ProductNDC>54575-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Rhizopus Nigricans</ProprietaryName>
<NonProprietaryName>Rhizopus Stolonifer</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>PERCUTANEOUS; SUBCUTANEOUS</RouteName>
<StartMarketingDate>19671207</StartMarketingDate>
<MarketingCategoryName>BLA</MarketingCategoryName>
<ApplicationNumber>BLA101376</ApplicationNumber>
<LabelerName>Allergy Laboratories, Inc.</LabelerName>
<SubstanceName>RHIZOPUS STOLONIFER</SubstanceName>
<StrengthNumber>1</StrengthNumber>
<StrengthUnit>g/20mL</StrengthUnit>
<Pharm_Classes>Non-Standardized Fungal Allergenic Extract [EPC],Increased Histamine Release [PE],Cell-mediated Immunity [PE],Increased IgG Production [PE],Fungal Proteins [CS],Allergens [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
<IndicationAndUsage>Immunotherapy using allergenic extracts is indicated for use in patients with severe allergy symptoms (hay fever, rhinitis, etc.) to pollens, molds, insects, animal danders and various other allergens. Immunotherapy is intended for patients whose symptoms are not satisfactorily controlled by avoidance of the offending allergen or by the use of symptomatic medications. Treatment uses only those specific allergens that the patient is sensitive to based on diagnostic tests and medical history. It is not intended for treatment of patients who do not manifest immediate hypersensitivity reactions to the allergenic extract following skin testing.</IndicationAndUsage>
<Description>Therapeutic extracts (concentrates) are designed primarily for the physician equipped to prepare dilutions and mixtures as necessary. Allergenic Extracts are manufactured from various biological allergenic source materials including pollens, molds, epidermals, insects, food and environmental inhalants. The extraction is performed in a glycerin solution and the resulting concentration is expressed as weight to volume (w/v) ratio. This is the weight of dry pollen in grams to volume of glycerin extracting solution in milliliters. Extracts are filtered and sterile filled. Tests include those for safety and sterility. The route of administration is subcutaneous. Scratch diagnostic extracts are of the same therapeutic extract formulation and their route of administration is percutaneous. Intradermal diagnostic extracts are dilutions of the therapeutic extracts using Sterile Diluent for Allergenic Extract. The following allergenic extracts are designated and labeled “FOR DIAGNOSTIC USE ONLY”. Data to support the therapeutic use of these extracts has not been established: Coffee Cottonseed Flaxseed Housefly Mosquito. The strength of Standardized Short Ragweed and Ragweed Mix, Giant and Short extracts is described (in addition to w/v) as antigen E content. The concentration of antigen E per milliliter of the final preparation as determined by radial immunodiffusion (RID). The antigen E content of an extract is influenced by several variables. These include antigen E content of the pollen, nature of extracting solutions, ratio of pollen weight to volume of extracting solution and storage conditions. Variables which influence antigen E stability during storage conditions include nature of the solvent, antigen E concentration and storage temperature. Glycerin is a stabilizer of antigen E and other allergens.</Description>
</NDC>
<NDC>
<NDCCode>55150-217-10</NDCCode>
<PackageDescription>10 VIAL, MULTI-DOSE in 1 CARTON (55150-217-10) > 10 mL in 1 VIAL, MULTI-DOSE</PackageDescription>
<NDC11Code>55150-0217-10</NDC11Code>
<ProductNDC>55150-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Atracurium Besylate</ProprietaryName>
<NonProprietaryName>Atracurium Besylate</NonProprietaryName>
<DosageFormName>INJECTION, SOLUTION</DosageFormName>
<RouteName>INTRAVENOUS</RouteName>
<StartMarketingDate>20150408</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA206011</ApplicationNumber>
<LabelerName>AuroMedics Pharma LLC</LabelerName>
<SubstanceName>ATRACURIUM BESYLATE</SubstanceName>
<StrengthNumber>100</StrengthNumber>
<StrengthUnit>mg/10mL</StrengthUnit>
<Pharm_Classes>Neuromuscular Nondepolarizing Blockade [PE], Nondepolarizing Neuromuscular Blocker [EPC]</Pharm_Classes>
<Status>Active</Status>
<LastUpdate>2022-02-16</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20261231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20150408</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Atracurium Besylate Injection, USP is indicated, as an adjunct to general anesthesia, to facilitate endotracheal intubation and to provide skeletal muscle relaxation during surgery or mechanical ventilation.</IndicationAndUsage>
<Description>Atracurium besylate is an intermediate-duration, nondepolarizing, skeletal muscle relaxant for intravenous administration. Atracurium besylate is designated as 2-(2-Carboxyethyl)-1,2,3,4-tetrahydro-6,7-dimethoxy-2-methyl-1-veratrylisoquinolinium benzenesulfonate, pentamethylene ester. It has a molecular weight of 1243.49, and its molecular formula is C65H82N2O18S2. Atracurium besylate USP is white to almost white solid and hygroscopic. The structural formula is. Atracurium besylate is a complex molecule containing four sites at which different stereochemical configurations can occur. The symmetry of the molecule, however, results in only ten, instead of sixteen, possible different isomers. The manufacture of atracurium besylate results in these isomers being produced in unequal amounts but with a consistent ratio. Those molecules in which the methyl group attached to the quaternary nitrogen projects on the opposite side to the adjacent substituted-benzyl moiety predominate by approximately 3:1.Atracurium Besylate Injection, USP is a sterile, non-pyrogenic, clear, colorless aqueous solution free from visible particles. Each mL contains 10 mg atracurium besylate USP (equivalent to 7.47 mg atracurium). The pH is adjusted to 3.00 to 3.65 with benzenesulfonic acid. The multiple-dose vial contains 0.9% benzyl alcohol added as a preservative. Atracurium besylate injection slowly loses potency with time at the rate of approximately 6% per year under refrigeration (5°C). Atracurium besylate injection should be refrigerated at 2° to 8°C (36° to 46°F) to preserve potency. Rate of loss in potency increases to approximately 5% per month at 25°C (77°F). Upon removal from refrigeration to room temperature storage conditions (25°C/77°F), use atracurium besylate injection within 14 days even if re-refrigerated.</Description>
</NDC>
<NDC>
<NDCCode>55648-217-04</NDCCode>
<PackageDescription>10 BLISTER PACK in 1 CARTON (55648-217-04) > 10 TABLET, DELAYED RELEASE in 1 BLISTER PACK</PackageDescription>
<NDC11Code>55648-0217-04</NDC11Code>
<ProductNDC>55648-217</ProductNDC>
<ProductTypeName>HUMAN PRESCRIPTION DRUG</ProductTypeName>
<ProprietaryName>Diclofenac Sodium And Misoprostol</ProprietaryName>
<NonProprietaryName>Diclofenac Sodium And Misoprostol</NonProprietaryName>
<DosageFormName>TABLET, DELAYED RELEASE</DosageFormName>
<RouteName>ORAL</RouteName>
<StartMarketingDate>20120815</StartMarketingDate>
<MarketingCategoryName>ANDA</MarketingCategoryName>
<ApplicationNumber>ANDA201948</ApplicationNumber>
<LabelerName>Wockhardt Limited</LabelerName>
<SubstanceName>DICLOFENAC SODIUM; MISOPROSTOL</SubstanceName>
<StrengthNumber>75; .2</StrengthNumber>
<StrengthUnit>mg/1; mg/1</StrengthUnit>
<Pharm_Classes>Cyclooxygenase Inhibitors [MoA],Decreased Prostaglandin Production [PE],Anti-Inflammatory Agents, Non-Steroidal [CS],Nonsteroidal Anti-inflammatory Drug [EPC],Prostaglandin E1 Analog [EPC],Prostaglandins E, Synthetic [CS]</Pharm_Classes>
<Status>Deprecated</Status>
<LastUpdate>2019-09-21</LastUpdate>
<ProductNdcExcludeFlag>E</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20181231</ListingRecordCertifiedThrough>
</NDC>
<NDC>
<NDCCode>56136-217-01</NDCCode>
<PackageDescription>10 mL in 1 BOTTLE, SPRAY (56136-217-01) </PackageDescription>
<NDC11Code>56136-0217-01</NDC11Code>
<ProductNDC>56136-217</ProductNDC>
<ProductTypeName>HUMAN OTC DRUG</ProductTypeName>
<ProprietaryName>On The Go Hand Sanitizer White Jasmine</ProprietaryName>
<ProprietaryNameSuffix>With Vitamin E</ProprietaryNameSuffix>
<NonProprietaryName>Alcohol</NonProprietaryName>
<DosageFormName>SPRAY</DosageFormName>
<RouteName>TOPICAL</RouteName>
<StartMarketingDate>20200925</StartMarketingDate>
<MarketingCategoryName>OTC MONOGRAPH NOT FINAL</MarketingCategoryName>
<ApplicationNumber>part333E</ApplicationNumber>
<LabelerName>Ganzhou Olivee Cosmetic Co., Ltd.</LabelerName>
<SubstanceName>ALCOHOL</SubstanceName>
<StrengthNumber>70</StrengthNumber>
<StrengthUnit>mL/100mL</StrengthUnit>
<Status>Deprecated</Status>
<LastUpdate>2025-01-01</LastUpdate>
<PackageNdcExcludeFlag>N</PackageNdcExcludeFlag>
<ProductNdcExcludeFlag>N</ProductNdcExcludeFlag>
<ListingRecordCertifiedThrough>20241231</ListingRecordCertifiedThrough>
<StartMarketingDatePackage>20200925</StartMarketingDatePackage>
<SamplePackage>N</SamplePackage>
<IndicationAndUsage>Antiseptic Cleanser, Help decrease bacteria on skin.</IndicationAndUsage>
</NDC>
</NDCList>